| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * Driver for Analog Devices ADV748X CSI-2 Transmitter |
| * |
| * Copyright (C) 2017 Renesas Electronics Corp. |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/mutex.h> |
| |
| #include <media/v4l2-ctrls.h> |
| #include <media/v4l2-device.h> |
| #include <media/v4l2-ioctl.h> |
| |
| #include "adv748x.h" |
| |
| static int adv748x_csi2_set_virtual_channel(struct adv748x_csi2 *tx, |
| unsigned int vc) |
| { |
| return tx_write(tx, ADV748X_CSI_VC_REF, vc << ADV748X_CSI_VC_REF_SHIFT); |
| } |
| |
| /** |
| * adv748x_csi2_register_link : Register and link internal entities |
| * |
| * @tx: CSI2 private entity |
| * @v4l2_dev: Video registration device |
| * @src: Source subdevice to establish link |
| * @src_pad: Pad number of source to link to this @tx |
| * @enable: Link enabled flag |
| * |
| * Ensure that the subdevice is registered against the v4l2_device, and link the |
| * source pad to the sink pad of the CSI2 bus entity. |
| */ |
| static int adv748x_csi2_register_link(struct adv748x_csi2 *tx, |
| struct v4l2_device *v4l2_dev, |
| struct v4l2_subdev *src, |
| unsigned int src_pad, |
| bool enable) |
| { |
| int ret; |
| |
| if (!src->v4l2_dev) { |
| ret = v4l2_device_register_subdev(v4l2_dev, src); |
| if (ret) |
| return ret; |
| } |
| |
| ret = media_create_pad_link(&src->entity, src_pad, |
| &tx->sd.entity, ADV748X_CSI2_SINK, |
| enable ? MEDIA_LNK_FL_ENABLED : 0); |
| if (ret) |
| return ret; |
| |
| if (enable) |
| tx->src = src; |
| |
| return 0; |
| } |
| |
| /* ----------------------------------------------------------------------------- |
| * v4l2_subdev_internal_ops |
| * |
| * We use the internal registered operation to be able to ensure that our |
| * incremental subdevices (not connected in the forward path) can be registered |
| * against the resulting video path and media device. |
| */ |
| |
| static int adv748x_csi2_registered(struct v4l2_subdev *sd) |
| { |
| struct adv748x_csi2 *tx = adv748x_sd_to_csi2(sd); |
| struct adv748x_state *state = tx->state; |
| int ret; |
| |
| adv_dbg(state, "Registered %s (%s)", is_txa(tx) ? "TXA":"TXB", |
| sd->name); |
| |
| /* |
| * Link TXA to AFE and HDMI, and TXB to AFE only as TXB cannot output |
| * HDMI. |
| * |
| * The HDMI->TXA link is enabled by default, as is the AFE->TXB one. |
| */ |
| if (is_afe_enabled(state)) { |
| ret = adv748x_csi2_register_link(tx, sd->v4l2_dev, |
| &state->afe.sd, |
| ADV748X_AFE_SOURCE, |
| is_txb(tx)); |
| if (ret) |
| return ret; |
| |
| /* TXB can output AFE signals only. */ |
| if (is_txb(tx)) |
| state->afe.tx = tx; |
| } |
| |
| /* Register link to HDMI for TXA only. */ |
| if (is_txb(tx) || !is_hdmi_enabled(state)) |
| return 0; |
| |
| ret = adv748x_csi2_register_link(tx, sd->v4l2_dev, &state->hdmi.sd, |
| ADV748X_HDMI_SOURCE, true); |
| if (ret) |
| return ret; |
| |
| /* The default HDMI output is TXA. */ |
| state->hdmi.tx = tx; |
| |
| return 0; |
| } |
| |
| static const struct v4l2_subdev_internal_ops adv748x_csi2_internal_ops = { |
| .registered = adv748x_csi2_registered, |
| }; |
| |
| /* ----------------------------------------------------------------------------- |
| * v4l2_subdev_video_ops |
| */ |
| |
| static int adv748x_csi2_s_stream(struct v4l2_subdev *sd, int enable) |
| { |
| struct adv748x_csi2 *tx = adv748x_sd_to_csi2(sd); |
| struct v4l2_subdev *src; |
| |
| src = adv748x_get_remote_sd(&tx->pads[ADV748X_CSI2_SINK]); |
| if (!src) |
| return -EPIPE; |
| |
| return v4l2_subdev_call(src, video, s_stream, enable); |
| } |
| |
| static const struct v4l2_subdev_video_ops adv748x_csi2_video_ops = { |
| .s_stream = adv748x_csi2_s_stream, |
| }; |
| |
| /* ----------------------------------------------------------------------------- |
| * v4l2_subdev_pad_ops |
| * |
| * The CSI2 bus pads are ignorant to the data sizes or formats. |
| * But we must support setting the pad formats for format propagation. |
| */ |
| |
| static struct v4l2_mbus_framefmt * |
| adv748x_csi2_get_pad_format(struct v4l2_subdev *sd, |
| struct v4l2_subdev_pad_config *cfg, |
| unsigned int pad, u32 which) |
| { |
| struct adv748x_csi2 *tx = adv748x_sd_to_csi2(sd); |
| |
| if (which == V4L2_SUBDEV_FORMAT_TRY) |
| return v4l2_subdev_get_try_format(sd, cfg, pad); |
| |
| return &tx->format; |
| } |
| |
| static int adv748x_csi2_get_format(struct v4l2_subdev *sd, |
| struct v4l2_subdev_pad_config *cfg, |
| struct v4l2_subdev_format *sdformat) |
| { |
| struct adv748x_csi2 *tx = adv748x_sd_to_csi2(sd); |
| struct adv748x_state *state = tx->state; |
| struct v4l2_mbus_framefmt *mbusformat; |
| |
| mbusformat = adv748x_csi2_get_pad_format(sd, cfg, sdformat->pad, |
| sdformat->which); |
| if (!mbusformat) |
| return -EINVAL; |
| |
| mutex_lock(&state->mutex); |
| |
| sdformat->format = *mbusformat; |
| |
| mutex_unlock(&state->mutex); |
| |
| return 0; |
| } |
| |
| static int adv748x_csi2_set_format(struct v4l2_subdev *sd, |
| struct v4l2_subdev_pad_config *cfg, |
| struct v4l2_subdev_format *sdformat) |
| { |
| struct adv748x_csi2 *tx = adv748x_sd_to_csi2(sd); |
| struct adv748x_state *state = tx->state; |
| struct v4l2_mbus_framefmt *mbusformat; |
| int ret = 0; |
| |
| mbusformat = adv748x_csi2_get_pad_format(sd, cfg, sdformat->pad, |
| sdformat->which); |
| if (!mbusformat) |
| return -EINVAL; |
| |
| mutex_lock(&state->mutex); |
| |
| if (sdformat->pad == ADV748X_CSI2_SOURCE) { |
| const struct v4l2_mbus_framefmt *sink_fmt; |
| |
| sink_fmt = adv748x_csi2_get_pad_format(sd, cfg, |
| ADV748X_CSI2_SINK, |
| sdformat->which); |
| |
| if (!sink_fmt) { |
| ret = -EINVAL; |
| goto unlock; |
| } |
| |
| sdformat->format = *sink_fmt; |
| } |
| |
| *mbusformat = sdformat->format; |
| |
| unlock: |
| mutex_unlock(&state->mutex); |
| |
| return ret; |
| } |
| |
| static const struct v4l2_subdev_pad_ops adv748x_csi2_pad_ops = { |
| .get_fmt = adv748x_csi2_get_format, |
| .set_fmt = adv748x_csi2_set_format, |
| }; |
| |
| /* ----------------------------------------------------------------------------- |
| * v4l2_subdev_ops |
| */ |
| |
| static const struct v4l2_subdev_ops adv748x_csi2_ops = { |
| .video = &adv748x_csi2_video_ops, |
| .pad = &adv748x_csi2_pad_ops, |
| }; |
| |
| /* ----------------------------------------------------------------------------- |
| * Subdev module and controls |
| */ |
| |
| int adv748x_csi2_set_pixelrate(struct v4l2_subdev *sd, s64 rate) |
| { |
| struct adv748x_csi2 *tx = adv748x_sd_to_csi2(sd); |
| |
| if (!tx->pixel_rate) |
| return -EINVAL; |
| |
| return v4l2_ctrl_s_ctrl_int64(tx->pixel_rate, rate); |
| } |
| |
| static int adv748x_csi2_s_ctrl(struct v4l2_ctrl *ctrl) |
| { |
| switch (ctrl->id) { |
| case V4L2_CID_PIXEL_RATE: |
| return 0; |
| default: |
| return -EINVAL; |
| } |
| } |
| |
| static const struct v4l2_ctrl_ops adv748x_csi2_ctrl_ops = { |
| .s_ctrl = adv748x_csi2_s_ctrl, |
| }; |
| |
| static int adv748x_csi2_init_controls(struct adv748x_csi2 *tx) |
| { |
| |
| v4l2_ctrl_handler_init(&tx->ctrl_hdl, 1); |
| |
| tx->pixel_rate = v4l2_ctrl_new_std(&tx->ctrl_hdl, |
| &adv748x_csi2_ctrl_ops, |
| V4L2_CID_PIXEL_RATE, 1, INT_MAX, |
| 1, 1); |
| |
| tx->sd.ctrl_handler = &tx->ctrl_hdl; |
| if (tx->ctrl_hdl.error) { |
| v4l2_ctrl_handler_free(&tx->ctrl_hdl); |
| return tx->ctrl_hdl.error; |
| } |
| |
| return v4l2_ctrl_handler_setup(&tx->ctrl_hdl); |
| } |
| |
| int adv748x_csi2_init(struct adv748x_state *state, struct adv748x_csi2 *tx) |
| { |
| int ret; |
| |
| if (!is_tx_enabled(tx)) |
| return 0; |
| |
| /* Initialise the virtual channel */ |
| adv748x_csi2_set_virtual_channel(tx, 0); |
| |
| adv748x_subdev_init(&tx->sd, state, &adv748x_csi2_ops, |
| MEDIA_ENT_F_VID_IF_BRIDGE, |
| is_txa(tx) ? "txa" : "txb"); |
| |
| /* Ensure that matching is based upon the endpoint fwnodes */ |
| tx->sd.fwnode = of_fwnode_handle(state->endpoints[tx->port]); |
| |
| /* Register internal ops for incremental subdev registration */ |
| tx->sd.internal_ops = &adv748x_csi2_internal_ops; |
| |
| tx->pads[ADV748X_CSI2_SINK].flags = MEDIA_PAD_FL_SINK; |
| tx->pads[ADV748X_CSI2_SOURCE].flags = MEDIA_PAD_FL_SOURCE; |
| |
| ret = media_entity_pads_init(&tx->sd.entity, ADV748X_CSI2_NR_PADS, |
| tx->pads); |
| if (ret) |
| return ret; |
| |
| ret = adv748x_csi2_init_controls(tx); |
| if (ret) |
| goto err_free_media; |
| |
| ret = v4l2_async_register_subdev(&tx->sd); |
| if (ret) |
| goto err_free_ctrl; |
| |
| return 0; |
| |
| err_free_ctrl: |
| v4l2_ctrl_handler_free(&tx->ctrl_hdl); |
| err_free_media: |
| media_entity_cleanup(&tx->sd.entity); |
| |
| return ret; |
| } |
| |
| void adv748x_csi2_cleanup(struct adv748x_csi2 *tx) |
| { |
| if (!is_tx_enabled(tx)) |
| return; |
| |
| v4l2_async_unregister_subdev(&tx->sd); |
| media_entity_cleanup(&tx->sd.entity); |
| v4l2_ctrl_handler_free(&tx->ctrl_hdl); |
| } |