| /* |
| * OMAP gate clock support |
| * |
| * Copyright (C) 2013 Texas Instruments, Inc. |
| * |
| * Tero Kristo <t-kristo@ti.com> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| * |
| * This program is distributed "as is" WITHOUT ANY WARRANTY of any |
| * kind, whether express or implied; without even the implied warranty |
| * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| */ |
| |
| #include <linux/clk-provider.h> |
| #include <linux/slab.h> |
| #include <linux/io.h> |
| #include <linux/of.h> |
| #include <linux/of_address.h> |
| #include <linux/clk/ti.h> |
| |
| #include "clock.h" |
| |
| #undef pr_fmt |
| #define pr_fmt(fmt) "%s: " fmt, __func__ |
| |
| static int omap36xx_gate_clk_enable_with_hsdiv_restore(struct clk_hw *clk); |
| |
| static const struct clk_ops omap_gate_clkdm_clk_ops = { |
| .init = &omap2_init_clk_clkdm, |
| .enable = &omap2_clkops_enable_clkdm, |
| .disable = &omap2_clkops_disable_clkdm, |
| .restore_context = clk_gate_restore_context, |
| }; |
| |
| const struct clk_ops omap_gate_clk_ops = { |
| .init = &omap2_init_clk_clkdm, |
| .enable = &omap2_dflt_clk_enable, |
| .disable = &omap2_dflt_clk_disable, |
| .is_enabled = &omap2_dflt_clk_is_enabled, |
| .restore_context = clk_gate_restore_context, |
| }; |
| |
| static const struct clk_ops omap_gate_clk_hsdiv_restore_ops = { |
| .init = &omap2_init_clk_clkdm, |
| .enable = &omap36xx_gate_clk_enable_with_hsdiv_restore, |
| .disable = &omap2_dflt_clk_disable, |
| .is_enabled = &omap2_dflt_clk_is_enabled, |
| .restore_context = clk_gate_restore_context, |
| }; |
| |
| /** |
| * omap36xx_gate_clk_enable_with_hsdiv_restore - enable clocks suffering |
| * from HSDivider PWRDN problem Implements Errata ID: i556. |
| * @clk: DPLL output struct clk |
| * |
| * 3630 only: dpll3_m3_ck, dpll4_m2_ck, dpll4_m3_ck, dpll4_m4_ck, |
| * dpll4_m5_ck & dpll4_m6_ck dividers gets loaded with reset |
| * valueafter their respective PWRDN bits are set. Any dummy write |
| * (Any other value different from the Read value) to the |
| * corresponding CM_CLKSEL register will refresh the dividers. |
| */ |
| static int omap36xx_gate_clk_enable_with_hsdiv_restore(struct clk_hw *hw) |
| { |
| struct clk_omap_divider *parent; |
| struct clk_hw *parent_hw; |
| u32 dummy_v, orig_v; |
| int ret; |
| |
| /* Clear PWRDN bit of HSDIVIDER */ |
| ret = omap2_dflt_clk_enable(hw); |
| |
| /* Parent is the x2 node, get parent of parent for the m2 div */ |
| parent_hw = clk_hw_get_parent(clk_hw_get_parent(hw)); |
| parent = to_clk_omap_divider(parent_hw); |
| |
| /* Restore the dividers */ |
| if (!ret) { |
| orig_v = ti_clk_ll_ops->clk_readl(&parent->reg); |
| dummy_v = orig_v; |
| |
| /* Write any other value different from the Read value */ |
| dummy_v ^= (1 << parent->shift); |
| ti_clk_ll_ops->clk_writel(dummy_v, &parent->reg); |
| |
| /* Write the original divider */ |
| ti_clk_ll_ops->clk_writel(orig_v, &parent->reg); |
| } |
| |
| return ret; |
| } |
| |
| static struct clk *_register_gate(struct device *dev, const char *name, |
| const char *parent_name, unsigned long flags, |
| struct clk_omap_reg *reg, u8 bit_idx, |
| u8 clk_gate_flags, const struct clk_ops *ops, |
| const struct clk_hw_omap_ops *hw_ops) |
| { |
| struct clk_init_data init = { NULL }; |
| struct clk_hw_omap *clk_hw; |
| struct clk *clk; |
| |
| clk_hw = kzalloc(sizeof(*clk_hw), GFP_KERNEL); |
| if (!clk_hw) |
| return ERR_PTR(-ENOMEM); |
| |
| clk_hw->hw.init = &init; |
| |
| init.name = name; |
| init.ops = ops; |
| |
| memcpy(&clk_hw->enable_reg, reg, sizeof(*reg)); |
| clk_hw->enable_bit = bit_idx; |
| clk_hw->ops = hw_ops; |
| |
| clk_hw->flags = clk_gate_flags; |
| |
| init.parent_names = &parent_name; |
| init.num_parents = 1; |
| |
| init.flags = flags; |
| |
| clk = ti_clk_register_omap_hw(NULL, &clk_hw->hw, name); |
| |
| if (IS_ERR(clk)) |
| kfree(clk_hw); |
| |
| return clk; |
| } |
| |
| struct clk_hw *ti_clk_build_component_gate(struct ti_clk_gate *setup) |
| { |
| struct clk_hw_omap *gate; |
| struct clk_omap_reg *reg; |
| const struct clk_hw_omap_ops *ops = &clkhwops_wait; |
| |
| if (!setup) |
| return NULL; |
| |
| gate = kzalloc(sizeof(*gate), GFP_KERNEL); |
| if (!gate) |
| return ERR_PTR(-ENOMEM); |
| |
| reg = (struct clk_omap_reg *)&gate->enable_reg; |
| reg->index = setup->module; |
| reg->offset = setup->reg; |
| |
| gate->enable_bit = setup->bit_shift; |
| |
| if (setup->flags & CLKF_NO_WAIT) |
| ops = NULL; |
| |
| if (setup->flags & CLKF_INTERFACE) |
| ops = &clkhwops_iclk_wait; |
| |
| gate->ops = ops; |
| |
| return &gate->hw; |
| } |
| |
| static void __init _of_ti_gate_clk_setup(struct device_node *node, |
| const struct clk_ops *ops, |
| const struct clk_hw_omap_ops *hw_ops) |
| { |
| struct clk *clk; |
| const char *parent_name; |
| struct clk_omap_reg reg; |
| u8 enable_bit = 0; |
| u32 val; |
| u32 flags = 0; |
| u8 clk_gate_flags = 0; |
| |
| if (ops != &omap_gate_clkdm_clk_ops) { |
| if (ti_clk_get_reg_addr(node, 0, ®)) |
| return; |
| |
| if (!of_property_read_u32(node, "ti,bit-shift", &val)) |
| enable_bit = val; |
| } |
| |
| if (of_clk_get_parent_count(node) != 1) { |
| pr_err("%pOFn must have 1 parent\n", node); |
| return; |
| } |
| |
| parent_name = of_clk_get_parent_name(node, 0); |
| |
| if (of_property_read_bool(node, "ti,set-rate-parent")) |
| flags |= CLK_SET_RATE_PARENT; |
| |
| if (of_property_read_bool(node, "ti,set-bit-to-disable")) |
| clk_gate_flags |= INVERT_ENABLE; |
| |
| clk = _register_gate(NULL, node->name, parent_name, flags, ®, |
| enable_bit, clk_gate_flags, ops, hw_ops); |
| |
| if (!IS_ERR(clk)) |
| of_clk_add_provider(node, of_clk_src_simple_get, clk); |
| } |
| |
| static void __init |
| _of_ti_composite_gate_clk_setup(struct device_node *node, |
| const struct clk_hw_omap_ops *hw_ops) |
| { |
| struct clk_hw_omap *gate; |
| u32 val = 0; |
| |
| gate = kzalloc(sizeof(*gate), GFP_KERNEL); |
| if (!gate) |
| return; |
| |
| if (ti_clk_get_reg_addr(node, 0, &gate->enable_reg)) |
| goto cleanup; |
| |
| of_property_read_u32(node, "ti,bit-shift", &val); |
| |
| gate->enable_bit = val; |
| gate->ops = hw_ops; |
| |
| if (!ti_clk_add_component(node, &gate->hw, CLK_COMPONENT_TYPE_GATE)) |
| return; |
| |
| cleanup: |
| kfree(gate); |
| } |
| |
| static void __init |
| of_ti_composite_no_wait_gate_clk_setup(struct device_node *node) |
| { |
| _of_ti_composite_gate_clk_setup(node, NULL); |
| } |
| CLK_OF_DECLARE(ti_composite_no_wait_gate_clk, "ti,composite-no-wait-gate-clock", |
| of_ti_composite_no_wait_gate_clk_setup); |
| |
| #if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) |
| static void __init of_ti_composite_interface_clk_setup(struct device_node *node) |
| { |
| _of_ti_composite_gate_clk_setup(node, &clkhwops_iclk_wait); |
| } |
| CLK_OF_DECLARE(ti_composite_interface_clk, "ti,composite-interface-clock", |
| of_ti_composite_interface_clk_setup); |
| #endif |
| |
| static void __init of_ti_composite_gate_clk_setup(struct device_node *node) |
| { |
| _of_ti_composite_gate_clk_setup(node, &clkhwops_wait); |
| } |
| CLK_OF_DECLARE(ti_composite_gate_clk, "ti,composite-gate-clock", |
| of_ti_composite_gate_clk_setup); |
| |
| |
| static void __init of_ti_clkdm_gate_clk_setup(struct device_node *node) |
| { |
| _of_ti_gate_clk_setup(node, &omap_gate_clkdm_clk_ops, NULL); |
| } |
| CLK_OF_DECLARE(ti_clkdm_gate_clk, "ti,clkdm-gate-clock", |
| of_ti_clkdm_gate_clk_setup); |
| |
| static void __init of_ti_hsdiv_gate_clk_setup(struct device_node *node) |
| { |
| _of_ti_gate_clk_setup(node, &omap_gate_clk_hsdiv_restore_ops, |
| &clkhwops_wait); |
| } |
| CLK_OF_DECLARE(ti_hsdiv_gate_clk, "ti,hsdiv-gate-clock", |
| of_ti_hsdiv_gate_clk_setup); |
| |
| static void __init of_ti_gate_clk_setup(struct device_node *node) |
| { |
| _of_ti_gate_clk_setup(node, &omap_gate_clk_ops, NULL); |
| } |
| CLK_OF_DECLARE(ti_gate_clk, "ti,gate-clock", of_ti_gate_clk_setup); |
| |
| static void __init of_ti_wait_gate_clk_setup(struct device_node *node) |
| { |
| _of_ti_gate_clk_setup(node, &omap_gate_clk_ops, &clkhwops_wait); |
| } |
| CLK_OF_DECLARE(ti_wait_gate_clk, "ti,wait-gate-clock", |
| of_ti_wait_gate_clk_setup); |
| |
| #ifdef CONFIG_ARCH_OMAP3 |
| static void __init of_ti_am35xx_gate_clk_setup(struct device_node *node) |
| { |
| _of_ti_gate_clk_setup(node, &omap_gate_clk_ops, |
| &clkhwops_am35xx_ipss_module_wait); |
| } |
| CLK_OF_DECLARE(ti_am35xx_gate_clk, "ti,am35xx-gate-clock", |
| of_ti_am35xx_gate_clk_setup); |
| |
| static void __init of_ti_dss_gate_clk_setup(struct device_node *node) |
| { |
| _of_ti_gate_clk_setup(node, &omap_gate_clk_ops, |
| &clkhwops_omap3430es2_dss_usbhost_wait); |
| } |
| CLK_OF_DECLARE(ti_dss_gate_clk, "ti,dss-gate-clock", |
| of_ti_dss_gate_clk_setup); |
| #endif |