| // SPDX-License-Identifier: GPL-2.0-or-later |
| /* |
| * Driver for +/-1 degree C, SMBus-Compatible Remote/Local Temperature Sensor |
| * with Overtemperature Alarm |
| * |
| * Copyright (C) 2011 AppearTV AS |
| * |
| * Derived from: |
| * |
| * Based on the max1619 driver. |
| * Copyright (C) 2003-2004 Oleksij Rempel <bug-track@fisher-privat.net> |
| * Jean Delvare <jdelvare@suse.de> |
| * |
| * The MAX6642 is a sensor chip made by Maxim. |
| * It reports up to two temperatures (its own plus up to |
| * one external one). Complete datasheet can be |
| * obtained from Maxim's website at: |
| * http://datasheets.maxim-ic.com/en/ds/MAX6642.pdf |
| */ |
| |
| |
| #include <linux/module.h> |
| #include <linux/init.h> |
| #include <linux/slab.h> |
| #include <linux/jiffies.h> |
| #include <linux/i2c.h> |
| #include <linux/hwmon.h> |
| #include <linux/hwmon-sysfs.h> |
| #include <linux/err.h> |
| #include <linux/mutex.h> |
| #include <linux/sysfs.h> |
| |
| static const unsigned short normal_i2c[] = { |
| 0x48, 0x49, 0x4a, 0x4b, 0x4c, 0x4d, 0x4e, 0x4f, I2C_CLIENT_END }; |
| |
| /* |
| * The MAX6642 registers |
| */ |
| |
| #define MAX6642_REG_R_MAN_ID 0xFE |
| #define MAX6642_REG_R_CONFIG 0x03 |
| #define MAX6642_REG_W_CONFIG 0x09 |
| #define MAX6642_REG_R_STATUS 0x02 |
| #define MAX6642_REG_R_LOCAL_TEMP 0x00 |
| #define MAX6642_REG_R_LOCAL_TEMPL 0x11 |
| #define MAX6642_REG_R_LOCAL_HIGH 0x05 |
| #define MAX6642_REG_W_LOCAL_HIGH 0x0B |
| #define MAX6642_REG_R_REMOTE_TEMP 0x01 |
| #define MAX6642_REG_R_REMOTE_TEMPL 0x10 |
| #define MAX6642_REG_R_REMOTE_HIGH 0x07 |
| #define MAX6642_REG_W_REMOTE_HIGH 0x0D |
| |
| /* |
| * Conversions |
| */ |
| |
| static int temp_from_reg10(int val) |
| { |
| return val * 250; |
| } |
| |
| static int temp_from_reg(int val) |
| { |
| return val * 1000; |
| } |
| |
| static int temp_to_reg(int val) |
| { |
| return val / 1000; |
| } |
| |
| /* |
| * Client data (each client gets its own) |
| */ |
| |
| struct max6642_data { |
| struct i2c_client *client; |
| struct mutex update_lock; |
| bool valid; /* zero until following fields are valid */ |
| unsigned long last_updated; /* in jiffies */ |
| |
| /* registers values */ |
| u16 temp_input[2]; /* local/remote */ |
| u16 temp_high[2]; /* local/remote */ |
| u8 alarms; |
| }; |
| |
| /* |
| * Real code |
| */ |
| |
| static void max6642_init_client(struct max6642_data *data, |
| struct i2c_client *client) |
| { |
| u8 config; |
| |
| /* |
| * Start the conversions. |
| */ |
| config = i2c_smbus_read_byte_data(client, MAX6642_REG_R_CONFIG); |
| if (config & 0x40) |
| i2c_smbus_write_byte_data(client, MAX6642_REG_W_CONFIG, |
| config & 0xBF); /* run */ |
| |
| data->temp_high[0] = i2c_smbus_read_byte_data(client, |
| MAX6642_REG_R_LOCAL_HIGH); |
| data->temp_high[1] = i2c_smbus_read_byte_data(client, |
| MAX6642_REG_R_REMOTE_HIGH); |
| } |
| |
| /* Return 0 if detection is successful, -ENODEV otherwise */ |
| static int max6642_detect(struct i2c_client *client, |
| struct i2c_board_info *info) |
| { |
| struct i2c_adapter *adapter = client->adapter; |
| u8 reg_config, reg_status, man_id; |
| |
| if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) |
| return -ENODEV; |
| |
| /* identification */ |
| man_id = i2c_smbus_read_byte_data(client, MAX6642_REG_R_MAN_ID); |
| if (man_id != 0x4D) |
| return -ENODEV; |
| |
| /* sanity check */ |
| if (i2c_smbus_read_byte_data(client, 0x04) != 0x4D |
| || i2c_smbus_read_byte_data(client, 0x06) != 0x4D |
| || i2c_smbus_read_byte_data(client, 0xff) != 0x4D) |
| return -ENODEV; |
| |
| /* |
| * We read the config and status register, the 4 lower bits in the |
| * config register should be zero and bit 5, 3, 1 and 0 should be |
| * zero in the status register. |
| */ |
| reg_config = i2c_smbus_read_byte_data(client, MAX6642_REG_R_CONFIG); |
| if ((reg_config & 0x0f) != 0x00) |
| return -ENODEV; |
| |
| /* in between, another round of sanity checks */ |
| if (i2c_smbus_read_byte_data(client, 0x04) != reg_config |
| || i2c_smbus_read_byte_data(client, 0x06) != reg_config |
| || i2c_smbus_read_byte_data(client, 0xff) != reg_config) |
| return -ENODEV; |
| |
| reg_status = i2c_smbus_read_byte_data(client, MAX6642_REG_R_STATUS); |
| if ((reg_status & 0x2b) != 0x00) |
| return -ENODEV; |
| |
| strlcpy(info->type, "max6642", I2C_NAME_SIZE); |
| |
| return 0; |
| } |
| |
| static struct max6642_data *max6642_update_device(struct device *dev) |
| { |
| struct max6642_data *data = dev_get_drvdata(dev); |
| struct i2c_client *client = data->client; |
| u16 val, tmp; |
| |
| mutex_lock(&data->update_lock); |
| |
| if (time_after(jiffies, data->last_updated + HZ) || !data->valid) { |
| dev_dbg(dev, "Updating max6642 data.\n"); |
| val = i2c_smbus_read_byte_data(client, |
| MAX6642_REG_R_LOCAL_TEMPL); |
| tmp = (val >> 6) & 3; |
| val = i2c_smbus_read_byte_data(client, |
| MAX6642_REG_R_LOCAL_TEMP); |
| val = (val << 2) | tmp; |
| data->temp_input[0] = val; |
| val = i2c_smbus_read_byte_data(client, |
| MAX6642_REG_R_REMOTE_TEMPL); |
| tmp = (val >> 6) & 3; |
| val = i2c_smbus_read_byte_data(client, |
| MAX6642_REG_R_REMOTE_TEMP); |
| val = (val << 2) | tmp; |
| data->temp_input[1] = val; |
| data->alarms = i2c_smbus_read_byte_data(client, |
| MAX6642_REG_R_STATUS); |
| |
| data->last_updated = jiffies; |
| data->valid = 1; |
| } |
| |
| mutex_unlock(&data->update_lock); |
| |
| return data; |
| } |
| |
| /* |
| * Sysfs stuff |
| */ |
| |
| static ssize_t temp_max10_show(struct device *dev, |
| struct device_attribute *dev_attr, char *buf) |
| { |
| struct sensor_device_attribute *attr = to_sensor_dev_attr(dev_attr); |
| struct max6642_data *data = max6642_update_device(dev); |
| |
| return sprintf(buf, "%d\n", |
| temp_from_reg10(data->temp_input[attr->index])); |
| } |
| |
| static ssize_t temp_max_show(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| struct sensor_device_attribute_2 *attr2 = to_sensor_dev_attr_2(attr); |
| struct max6642_data *data = max6642_update_device(dev); |
| |
| return sprintf(buf, "%d\n", temp_from_reg(data->temp_high[attr2->nr])); |
| } |
| |
| static ssize_t temp_max_store(struct device *dev, |
| struct device_attribute *attr, const char *buf, |
| size_t count) |
| { |
| struct sensor_device_attribute_2 *attr2 = to_sensor_dev_attr_2(attr); |
| struct max6642_data *data = dev_get_drvdata(dev); |
| unsigned long val; |
| int err; |
| |
| err = kstrtoul(buf, 10, &val); |
| if (err < 0) |
| return err; |
| |
| mutex_lock(&data->update_lock); |
| data->temp_high[attr2->nr] = clamp_val(temp_to_reg(val), 0, 255); |
| i2c_smbus_write_byte_data(data->client, attr2->index, |
| data->temp_high[attr2->nr]); |
| mutex_unlock(&data->update_lock); |
| return count; |
| } |
| |
| static ssize_t alarm_show(struct device *dev, struct device_attribute *attr, |
| char *buf) |
| { |
| int bitnr = to_sensor_dev_attr(attr)->index; |
| struct max6642_data *data = max6642_update_device(dev); |
| return sprintf(buf, "%d\n", (data->alarms >> bitnr) & 1); |
| } |
| |
| static SENSOR_DEVICE_ATTR_RO(temp1_input, temp_max10, 0); |
| static SENSOR_DEVICE_ATTR_RO(temp2_input, temp_max10, 1); |
| static SENSOR_DEVICE_ATTR_2_RW(temp1_max, temp_max, 0, |
| MAX6642_REG_W_LOCAL_HIGH); |
| static SENSOR_DEVICE_ATTR_2_RW(temp2_max, temp_max, 1, |
| MAX6642_REG_W_REMOTE_HIGH); |
| static SENSOR_DEVICE_ATTR_RO(temp2_fault, alarm, 2); |
| static SENSOR_DEVICE_ATTR_RO(temp1_max_alarm, alarm, 6); |
| static SENSOR_DEVICE_ATTR_RO(temp2_max_alarm, alarm, 4); |
| |
| static struct attribute *max6642_attrs[] = { |
| &sensor_dev_attr_temp1_input.dev_attr.attr, |
| &sensor_dev_attr_temp2_input.dev_attr.attr, |
| &sensor_dev_attr_temp1_max.dev_attr.attr, |
| &sensor_dev_attr_temp2_max.dev_attr.attr, |
| |
| &sensor_dev_attr_temp2_fault.dev_attr.attr, |
| &sensor_dev_attr_temp1_max_alarm.dev_attr.attr, |
| &sensor_dev_attr_temp2_max_alarm.dev_attr.attr, |
| NULL |
| }; |
| ATTRIBUTE_GROUPS(max6642); |
| |
| static int max6642_probe(struct i2c_client *client, |
| const struct i2c_device_id *id) |
| { |
| struct device *dev = &client->dev; |
| struct max6642_data *data; |
| struct device *hwmon_dev; |
| |
| data = devm_kzalloc(dev, sizeof(struct max6642_data), GFP_KERNEL); |
| if (!data) |
| return -ENOMEM; |
| |
| data->client = client; |
| mutex_init(&data->update_lock); |
| |
| /* Initialize the MAX6642 chip */ |
| max6642_init_client(data, client); |
| |
| hwmon_dev = devm_hwmon_device_register_with_groups(&client->dev, |
| client->name, data, |
| max6642_groups); |
| return PTR_ERR_OR_ZERO(hwmon_dev); |
| } |
| |
| /* |
| * Driver data (common to all clients) |
| */ |
| |
| static const struct i2c_device_id max6642_id[] = { |
| { "max6642", 0 }, |
| { } |
| }; |
| MODULE_DEVICE_TABLE(i2c, max6642_id); |
| |
| static struct i2c_driver max6642_driver = { |
| .class = I2C_CLASS_HWMON, |
| .driver = { |
| .name = "max6642", |
| }, |
| .probe = max6642_probe, |
| .id_table = max6642_id, |
| .detect = max6642_detect, |
| .address_list = normal_i2c, |
| }; |
| |
| module_i2c_driver(max6642_driver); |
| |
| MODULE_AUTHOR("Per Dalen <per.dalen@appeartv.com>"); |
| MODULE_DESCRIPTION("MAX6642 sensor driver"); |
| MODULE_LICENSE("GPL"); |