drivers/staging/rtl8723bs/include/rtw_eeprom.h

/* SPDX-License-Identifier: GPL-2.0 */
/******************************************************************************
 *
 * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
 *
 ******************************************************************************/
#ifndef __RTW_EEPROM_H__
#define __RTW_EEPROM_H__


#define	RTL8712_EEPROM_ID			0x8712
/* define	EEPROM_MAX_SIZE			256 */

#define	HWSET_MAX_SIZE_128		128
#define	HWSET_MAX_SIZE_256		256
#define	HWSET_MAX_SIZE_512		512

#define	EEPROM_MAX_SIZE			HWSET_MAX_SIZE_512

#define	CLOCK_RATE					50			/* 100us */

/*  EEPROM opcodes */
#define EEPROM_READ_OPCODE		06
#define EEPROM_WRITE_OPCODE		05
#define EEPROM_ERASE_OPCODE		07
#define EEPROM_EWEN_OPCODE		19      /*  Erase/write enable */
#define EEPROM_EWDS_OPCODE		16      /*  Erase/write disable */

/* Country codes */
#define USA							0x555320
#define EUROPE						0x1 /* temp, should be provided later */
#define JAPAN						0x2 /* temp, should be provided later */

#define eeprom_cis0_sz	17
#define eeprom_cis1_sz	50

/*  */
/*  Customer ID, note that: */
/*  This variable is initiailzed through EEPROM or registry, */
/*  however, its definition may be different with that in EEPROM for */
/*  EEPROM size consideration. So, we have to perform proper translation between them. */
/*  Besides, CustomerID of registry has precedence of that of EEPROM. */
/*  defined below. 060703, by rcnjko. */
/*  */
typedef enum _RT_CUSTOMER_ID
{
	RT_CID_DEFAULT = 0,
	RT_CID_8187_ALPHA0 = 1,
	RT_CID_8187_SERCOMM_PS = 2,
	RT_CID_8187_HW_LED = 3,
	RT_CID_8187_NETGEAR = 4,
	RT_CID_WHQL = 5,
	RT_CID_819x_CAMEO  = 6,
	RT_CID_819x_RUNTOP = 7,
	RT_CID_819x_Senao = 8,
	RT_CID_TOSHIBA = 9,	/*  Merge by Jacken, 2008/01/31. */
	RT_CID_819x_Netcore = 10,
	RT_CID_Nettronix = 11,
	RT_CID_DLINK = 12,
	RT_CID_PRONET = 13,
	RT_CID_COREGA = 14,
	RT_CID_CHINA_MOBILE = 15,
	RT_CID_819x_ALPHA = 16,
	RT_CID_819x_Sitecom = 17,
	RT_CID_CCX = 18, /*  It's set under CCX logo test and isn't demanded for CCX functions, but for test behavior like retry limit and tx report. By Bruce, 2009-02-17. */
	RT_CID_819x_Lenovo = 19,
	RT_CID_819x_QMI = 20,
	RT_CID_819x_Edimax_Belkin = 21,
	RT_CID_819x_Sercomm_Belkin = 22,
	RT_CID_819x_CAMEO1 = 23,
	RT_CID_819x_MSI = 24,
	RT_CID_819x_Acer = 25,
	RT_CID_819x_AzWave_ASUS = 26,
	RT_CID_819x_AzWave = 27, /*  For AzWave in PCIe, The ID is AzWave use and not only Asus */
	RT_CID_819x_HP = 28,
	RT_CID_819x_WNC_COREGA = 29,
	RT_CID_819x_Arcadyan_Belkin = 30,
	RT_CID_819x_SAMSUNG = 31,
	RT_CID_819x_CLEVO = 32,
	RT_CID_819x_DELL = 33,
	RT_CID_819x_PRONETS = 34,
	RT_CID_819x_Edimax_ASUS = 35,
	RT_CID_NETGEAR = 36,
	RT_CID_PLANEX = 37,
	RT_CID_CC_C = 38,
	RT_CID_819x_Xavi = 39,
	RT_CID_LENOVO_CHINA = 40,
	RT_CID_INTEL_CHINA = 41,
	RT_CID_TPLINK_HPWR = 42,
	RT_CID_819x_Sercomm_Netgear = 43,
	RT_CID_819x_ALPHA_Dlink = 44,/* add by ylb 20121012 for customer led for alpha */
	RT_CID_WNC_NEC = 45,/* add by page for NEC */
	RT_CID_DNI_BUFFALO = 46,/* add by page for NEC */
}RT_CUSTOMER_ID, *PRT_CUSTOMER_ID;

struct eeprom_priv
{
	u8 bautoload_fail_flag;
	u8 bloadfile_fail_flag;
	u8 bloadmac_fail_flag;
	u8 EepromOrEfuse;

	u8 mac_addr[6];	/* PermanentAddress */

	u16 	channel_plan;
	u16 	CustomerID;

	u8 efuse_eeprom_data[EEPROM_MAX_SIZE]; /* 92C:256bytes, 88E:512bytes, we use union set (512bytes) */
	u8 adjuseVoltageVal;

	u8 EEPROMRFGainOffset;
	u8 EEPROMRFGainVal;

	u8 sdio_setting;
	u32 	ocr;
	u8 cis0[eeprom_cis0_sz];
	u8 cis1[eeprom_cis1_sz];
};

#endif  /* __RTL871X_EEPROM_H__ */