| /* |
| * Driver for Allwinner sunXi IR controller |
| * |
| * Copyright (C) 2014 Alexsey Shestacov <wingrime@linux-sunxi.org> |
| * Copyright (C) 2014 Alexander Bersenev <bay@hackerdom.ru> |
| * |
| * Based on sun5i-ir.c: |
| * Copyright (C) 2007-2012 Daniel Wang |
| * Allwinner Technology Co., Ltd. <www.allwinnertech.com> |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License as |
| * published by the Free Software Foundation; either version 2 of |
| * the License, or (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| */ |
| |
| #include <linux/clk.h> |
| #include <linux/interrupt.h> |
| #include <linux/module.h> |
| #include <linux/of_platform.h> |
| #include <linux/reset.h> |
| #include <media/rc-core.h> |
| |
| #define SUNXI_IR_DEV "sunxi-ir" |
| |
| /* Registers */ |
| /* IR Control */ |
| #define SUNXI_IR_CTL_REG 0x00 |
| /* Global Enable */ |
| #define REG_CTL_GEN BIT(0) |
| /* RX block enable */ |
| #define REG_CTL_RXEN BIT(1) |
| /* CIR mode */ |
| #define REG_CTL_MD (BIT(4) | BIT(5)) |
| |
| /* Rx Config */ |
| #define SUNXI_IR_RXCTL_REG 0x10 |
| /* Pulse Polarity Invert flag */ |
| #define REG_RXCTL_RPPI BIT(2) |
| |
| /* Rx Data */ |
| #define SUNXI_IR_RXFIFO_REG 0x20 |
| |
| /* Rx Interrupt Enable */ |
| #define SUNXI_IR_RXINT_REG 0x2C |
| /* Rx FIFO Overflow */ |
| #define REG_RXINT_ROI_EN BIT(0) |
| /* Rx Packet End */ |
| #define REG_RXINT_RPEI_EN BIT(1) |
| /* Rx FIFO Data Available */ |
| #define REG_RXINT_RAI_EN BIT(4) |
| |
| /* Rx FIFO available byte level */ |
| #define REG_RXINT_RAL(val) ((val) << 8) |
| |
| /* Rx Interrupt Status */ |
| #define SUNXI_IR_RXSTA_REG 0x30 |
| /* RX FIFO Get Available Counter */ |
| #define REG_RXSTA_GET_AC(val) (((val) >> 8) & (ir->fifo_size * 2 - 1)) |
| /* Clear all interrupt status value */ |
| #define REG_RXSTA_CLEARALL 0xff |
| |
| /* IR Sample Config */ |
| #define SUNXI_IR_CIR_REG 0x34 |
| /* CIR_REG register noise threshold */ |
| #define REG_CIR_NTHR(val) (((val) << 2) & (GENMASK(7, 2))) |
| /* CIR_REG register idle threshold */ |
| #define REG_CIR_ITHR(val) (((val) << 8) & (GENMASK(15, 8))) |
| |
| /* Required frequency for IR0 or IR1 clock in CIR mode (default) */ |
| #define SUNXI_IR_BASE_CLK 8000000 |
| /* Noise threshold in samples */ |
| #define SUNXI_IR_RXNOISE 1 |
| /* Idle Threshold in samples */ |
| #define SUNXI_IR_RXIDLE 20 |
| /* Time after which device stops sending data in ms */ |
| #define SUNXI_IR_TIMEOUT 120 |
| |
| struct sunxi_ir { |
| spinlock_t ir_lock; |
| struct rc_dev *rc; |
| void __iomem *base; |
| int irq; |
| int fifo_size; |
| struct clk *clk; |
| struct clk *apb_clk; |
| struct reset_control *rst; |
| const char *map_name; |
| }; |
| |
| static irqreturn_t sunxi_ir_irq(int irqno, void *dev_id) |
| { |
| unsigned long status; |
| unsigned char dt; |
| unsigned int cnt, rc; |
| struct sunxi_ir *ir = dev_id; |
| struct ir_raw_event rawir = {}; |
| |
| spin_lock(&ir->ir_lock); |
| |
| status = readl(ir->base + SUNXI_IR_RXSTA_REG); |
| |
| /* clean all pending statuses */ |
| writel(status | REG_RXSTA_CLEARALL, ir->base + SUNXI_IR_RXSTA_REG); |
| |
| if (status & (REG_RXINT_RAI_EN | REG_RXINT_RPEI_EN)) { |
| /* How many messages in fifo */ |
| rc = REG_RXSTA_GET_AC(status); |
| /* Sanity check */ |
| rc = rc > ir->fifo_size ? ir->fifo_size : rc; |
| /* If we have data */ |
| for (cnt = 0; cnt < rc; cnt++) { |
| /* for each bit in fifo */ |
| dt = readb(ir->base + SUNXI_IR_RXFIFO_REG); |
| rawir.pulse = (dt & 0x80) != 0; |
| rawir.duration = ((dt & 0x7f) + 1) * |
| ir->rc->rx_resolution; |
| ir_raw_event_store_with_filter(ir->rc, &rawir); |
| } |
| } |
| |
| if (status & REG_RXINT_ROI_EN) { |
| ir_raw_event_reset(ir->rc); |
| } else if (status & REG_RXINT_RPEI_EN) { |
| ir_raw_event_set_idle(ir->rc, true); |
| ir_raw_event_handle(ir->rc); |
| } |
| |
| spin_unlock(&ir->ir_lock); |
| |
| return IRQ_HANDLED; |
| } |
| |
| static int sunxi_ir_probe(struct platform_device *pdev) |
| { |
| int ret = 0; |
| unsigned long tmp = 0; |
| |
| struct device *dev = &pdev->dev; |
| struct device_node *dn = dev->of_node; |
| struct resource *res; |
| struct sunxi_ir *ir; |
| u32 b_clk_freq = SUNXI_IR_BASE_CLK; |
| |
| ir = devm_kzalloc(dev, sizeof(struct sunxi_ir), GFP_KERNEL); |
| if (!ir) |
| return -ENOMEM; |
| |
| spin_lock_init(&ir->ir_lock); |
| |
| if (of_device_is_compatible(dn, "allwinner,sun5i-a13-ir")) |
| ir->fifo_size = 64; |
| else |
| ir->fifo_size = 16; |
| |
| /* Clock */ |
| ir->apb_clk = devm_clk_get(dev, "apb"); |
| if (IS_ERR(ir->apb_clk)) { |
| dev_err(dev, "failed to get a apb clock.\n"); |
| return PTR_ERR(ir->apb_clk); |
| } |
| ir->clk = devm_clk_get(dev, "ir"); |
| if (IS_ERR(ir->clk)) { |
| dev_err(dev, "failed to get a ir clock.\n"); |
| return PTR_ERR(ir->clk); |
| } |
| |
| /* Base clock frequency (optional) */ |
| of_property_read_u32(dn, "clock-frequency", &b_clk_freq); |
| |
| /* Reset (optional) */ |
| ir->rst = devm_reset_control_get_optional_exclusive(dev, NULL); |
| if (IS_ERR(ir->rst)) |
| return PTR_ERR(ir->rst); |
| ret = reset_control_deassert(ir->rst); |
| if (ret) |
| return ret; |
| |
| ret = clk_set_rate(ir->clk, b_clk_freq); |
| if (ret) { |
| dev_err(dev, "set ir base clock failed!\n"); |
| goto exit_reset_assert; |
| } |
| dev_dbg(dev, "set base clock frequency to %d Hz.\n", b_clk_freq); |
| |
| if (clk_prepare_enable(ir->apb_clk)) { |
| dev_err(dev, "try to enable apb_ir_clk failed\n"); |
| ret = -EINVAL; |
| goto exit_reset_assert; |
| } |
| |
| if (clk_prepare_enable(ir->clk)) { |
| dev_err(dev, "try to enable ir_clk failed\n"); |
| ret = -EINVAL; |
| goto exit_clkdisable_apb_clk; |
| } |
| |
| /* IO */ |
| res = platform_get_resource(pdev, IORESOURCE_MEM, 0); |
| ir->base = devm_ioremap_resource(dev, res); |
| if (IS_ERR(ir->base)) { |
| dev_err(dev, "failed to map registers\n"); |
| ret = PTR_ERR(ir->base); |
| goto exit_clkdisable_clk; |
| } |
| |
| ir->rc = rc_allocate_device(RC_DRIVER_IR_RAW); |
| if (!ir->rc) { |
| dev_err(dev, "failed to allocate device\n"); |
| ret = -ENOMEM; |
| goto exit_clkdisable_clk; |
| } |
| |
| ir->rc->priv = ir; |
| ir->rc->device_name = SUNXI_IR_DEV; |
| ir->rc->input_phys = "sunxi-ir/input0"; |
| ir->rc->input_id.bustype = BUS_HOST; |
| ir->rc->input_id.vendor = 0x0001; |
| ir->rc->input_id.product = 0x0001; |
| ir->rc->input_id.version = 0x0100; |
| ir->map_name = of_get_property(dn, "linux,rc-map-name", NULL); |
| ir->rc->map_name = ir->map_name ?: RC_MAP_EMPTY; |
| ir->rc->dev.parent = dev; |
| ir->rc->allowed_protocols = RC_PROTO_BIT_ALL_IR_DECODER; |
| /* Frequency after IR internal divider with sample period in ns */ |
| ir->rc->rx_resolution = (1000000000ul / (b_clk_freq / 64)); |
| ir->rc->timeout = MS_TO_NS(SUNXI_IR_TIMEOUT); |
| ir->rc->driver_name = SUNXI_IR_DEV; |
| |
| ret = rc_register_device(ir->rc); |
| if (ret) { |
| dev_err(dev, "failed to register rc device\n"); |
| goto exit_free_dev; |
| } |
| |
| platform_set_drvdata(pdev, ir); |
| |
| /* IRQ */ |
| ir->irq = platform_get_irq(pdev, 0); |
| if (ir->irq < 0) { |
| dev_err(dev, "no irq resource\n"); |
| ret = ir->irq; |
| goto exit_free_dev; |
| } |
| |
| ret = devm_request_irq(dev, ir->irq, sunxi_ir_irq, 0, SUNXI_IR_DEV, ir); |
| if (ret) { |
| dev_err(dev, "failed request irq\n"); |
| goto exit_free_dev; |
| } |
| |
| /* Enable CIR Mode */ |
| writel(REG_CTL_MD, ir->base+SUNXI_IR_CTL_REG); |
| |
| /* Set noise threshold and idle threshold */ |
| writel(REG_CIR_NTHR(SUNXI_IR_RXNOISE)|REG_CIR_ITHR(SUNXI_IR_RXIDLE), |
| ir->base + SUNXI_IR_CIR_REG); |
| |
| /* Invert Input Signal */ |
| writel(REG_RXCTL_RPPI, ir->base + SUNXI_IR_RXCTL_REG); |
| |
| /* Clear All Rx Interrupt Status */ |
| writel(REG_RXSTA_CLEARALL, ir->base + SUNXI_IR_RXSTA_REG); |
| |
| /* |
| * Enable IRQ on overflow, packet end, FIFO available with trigger |
| * level |
| */ |
| writel(REG_RXINT_ROI_EN | REG_RXINT_RPEI_EN | |
| REG_RXINT_RAI_EN | REG_RXINT_RAL(ir->fifo_size / 2 - 1), |
| ir->base + SUNXI_IR_RXINT_REG); |
| |
| /* Enable IR Module */ |
| tmp = readl(ir->base + SUNXI_IR_CTL_REG); |
| writel(tmp | REG_CTL_GEN | REG_CTL_RXEN, ir->base + SUNXI_IR_CTL_REG); |
| |
| dev_info(dev, "initialized sunXi IR driver\n"); |
| return 0; |
| |
| exit_free_dev: |
| rc_free_device(ir->rc); |
| exit_clkdisable_clk: |
| clk_disable_unprepare(ir->clk); |
| exit_clkdisable_apb_clk: |
| clk_disable_unprepare(ir->apb_clk); |
| exit_reset_assert: |
| reset_control_assert(ir->rst); |
| |
| return ret; |
| } |
| |
| static int sunxi_ir_remove(struct platform_device *pdev) |
| { |
| unsigned long flags; |
| struct sunxi_ir *ir = platform_get_drvdata(pdev); |
| |
| clk_disable_unprepare(ir->clk); |
| clk_disable_unprepare(ir->apb_clk); |
| reset_control_assert(ir->rst); |
| |
| spin_lock_irqsave(&ir->ir_lock, flags); |
| /* disable IR IRQ */ |
| writel(0, ir->base + SUNXI_IR_RXINT_REG); |
| /* clear All Rx Interrupt Status */ |
| writel(REG_RXSTA_CLEARALL, ir->base + SUNXI_IR_RXSTA_REG); |
| /* disable IR */ |
| writel(0, ir->base + SUNXI_IR_CTL_REG); |
| spin_unlock_irqrestore(&ir->ir_lock, flags); |
| |
| rc_unregister_device(ir->rc); |
| return 0; |
| } |
| |
| static const struct of_device_id sunxi_ir_match[] = { |
| { .compatible = "allwinner,sun4i-a10-ir", }, |
| { .compatible = "allwinner,sun5i-a13-ir", }, |
| {}, |
| }; |
| MODULE_DEVICE_TABLE(of, sunxi_ir_match); |
| |
| static struct platform_driver sunxi_ir_driver = { |
| .probe = sunxi_ir_probe, |
| .remove = sunxi_ir_remove, |
| .driver = { |
| .name = SUNXI_IR_DEV, |
| .of_match_table = sunxi_ir_match, |
| }, |
| }; |
| |
| module_platform_driver(sunxi_ir_driver); |
| |
| MODULE_DESCRIPTION("Allwinner sunXi IR controller driver"); |
| MODULE_AUTHOR("Alexsey Shestacov <wingrime@linux-sunxi.org>"); |
| MODULE_LICENSE("GPL"); |