| /* |
| linear.c : Multiple Devices driver for Linux |
| Copyright (C) 1994-96 Marc ZYNGIER |
| <zyngier@ufr-info-p7.ibp.fr> or |
| <maz@gloups.fdn.fr> |
| |
| Linear mode management functions. |
| |
| This program is free software; you can redistribute it and/or modify |
| it under the terms of the GNU General Public License as published by |
| the Free Software Foundation; either version 2, or (at your option) |
| any later version. |
| |
| You should have received a copy of the GNU General Public License |
| (for example /usr/src/linux/COPYING); if not, write to the Free |
| Software Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. |
| */ |
| |
| #include <linux/blkdev.h> |
| #include <linux/raid/md_u.h> |
| #include <linux/seq_file.h> |
| #include <linux/module.h> |
| #include <linux/slab.h> |
| #include <trace/events/block.h> |
| #include "md.h" |
| #include "md-linear.h" |
| |
| /* |
| * find which device holds a particular offset |
| */ |
| static inline struct dev_info *which_dev(struct mddev *mddev, sector_t sector) |
| { |
| int lo, mid, hi; |
| struct linear_conf *conf; |
| |
| lo = 0; |
| hi = mddev->raid_disks - 1; |
| conf = mddev->private; |
| |
| /* |
| * Binary Search |
| */ |
| |
| while (hi > lo) { |
| |
| mid = (hi + lo) / 2; |
| if (sector < conf->disks[mid].end_sector) |
| hi = mid; |
| else |
| lo = mid + 1; |
| } |
| |
| return conf->disks + lo; |
| } |
| |
| /* |
| * In linear_congested() conf->raid_disks is used as a copy of |
| * mddev->raid_disks to iterate conf->disks[], because conf->raid_disks |
| * and conf->disks[] are created in linear_conf(), they are always |
| * consitent with each other, but mddev->raid_disks does not. |
| */ |
| static int linear_congested(struct mddev *mddev, int bits) |
| { |
| struct linear_conf *conf; |
| int i, ret = 0; |
| |
| rcu_read_lock(); |
| conf = rcu_dereference(mddev->private); |
| |
| for (i = 0; i < conf->raid_disks && !ret ; i++) { |
| struct request_queue *q = bdev_get_queue(conf->disks[i].rdev->bdev); |
| ret |= bdi_congested(q->backing_dev_info, bits); |
| } |
| |
| rcu_read_unlock(); |
| return ret; |
| } |
| |
| static sector_t linear_size(struct mddev *mddev, sector_t sectors, int raid_disks) |
| { |
| struct linear_conf *conf; |
| sector_t array_sectors; |
| |
| conf = mddev->private; |
| WARN_ONCE(sectors || raid_disks, |
| "%s does not support generic reshape\n", __func__); |
| array_sectors = conf->array_sectors; |
| |
| return array_sectors; |
| } |
| |
| static struct linear_conf *linear_conf(struct mddev *mddev, int raid_disks) |
| { |
| struct linear_conf *conf; |
| struct md_rdev *rdev; |
| int i, cnt; |
| bool discard_supported = false; |
| |
| conf = kzalloc(struct_size(conf, disks, raid_disks), GFP_KERNEL); |
| if (!conf) |
| return NULL; |
| |
| cnt = 0; |
| conf->array_sectors = 0; |
| |
| rdev_for_each(rdev, mddev) { |
| int j = rdev->raid_disk; |
| struct dev_info *disk = conf->disks + j; |
| sector_t sectors; |
| |
| if (j < 0 || j >= raid_disks || disk->rdev) { |
| pr_warn("md/linear:%s: disk numbering problem. Aborting!\n", |
| mdname(mddev)); |
| goto out; |
| } |
| |
| disk->rdev = rdev; |
| if (mddev->chunk_sectors) { |
| sectors = rdev->sectors; |
| sector_div(sectors, mddev->chunk_sectors); |
| rdev->sectors = sectors * mddev->chunk_sectors; |
| } |
| |
| disk_stack_limits(mddev->gendisk, rdev->bdev, |
| rdev->data_offset << 9); |
| |
| conf->array_sectors += rdev->sectors; |
| cnt++; |
| |
| if (blk_queue_discard(bdev_get_queue(rdev->bdev))) |
| discard_supported = true; |
| } |
| if (cnt != raid_disks) { |
| pr_warn("md/linear:%s: not enough drives present. Aborting!\n", |
| mdname(mddev)); |
| goto out; |
| } |
| |
| if (!discard_supported) |
| blk_queue_flag_clear(QUEUE_FLAG_DISCARD, mddev->queue); |
| else |
| blk_queue_flag_set(QUEUE_FLAG_DISCARD, mddev->queue); |
| |
| /* |
| * Here we calculate the device offsets. |
| */ |
| conf->disks[0].end_sector = conf->disks[0].rdev->sectors; |
| |
| for (i = 1; i < raid_disks; i++) |
| conf->disks[i].end_sector = |
| conf->disks[i-1].end_sector + |
| conf->disks[i].rdev->sectors; |
| |
| /* |
| * conf->raid_disks is copy of mddev->raid_disks. The reason to |
| * keep a copy of mddev->raid_disks in struct linear_conf is, |
| * mddev->raid_disks may not be consistent with pointers number of |
| * conf->disks[] when it is updated in linear_add() and used to |
| * iterate old conf->disks[] earray in linear_congested(). |
| * Here conf->raid_disks is always consitent with number of |
| * pointers in conf->disks[] array, and mddev->private is updated |
| * with rcu_assign_pointer() in linear_addr(), such race can be |
| * avoided. |
| */ |
| conf->raid_disks = raid_disks; |
| |
| return conf; |
| |
| out: |
| kfree(conf); |
| return NULL; |
| } |
| |
| static int linear_run (struct mddev *mddev) |
| { |
| struct linear_conf *conf; |
| int ret; |
| |
| if (md_check_no_bitmap(mddev)) |
| return -EINVAL; |
| conf = linear_conf(mddev, mddev->raid_disks); |
| |
| if (!conf) |
| return 1; |
| mddev->private = conf; |
| md_set_array_sectors(mddev, linear_size(mddev, 0, 0)); |
| |
| ret = md_integrity_register(mddev); |
| if (ret) { |
| kfree(conf); |
| mddev->private = NULL; |
| } |
| return ret; |
| } |
| |
| static int linear_add(struct mddev *mddev, struct md_rdev *rdev) |
| { |
| /* Adding a drive to a linear array allows the array to grow. |
| * It is permitted if the new drive has a matching superblock |
| * already on it, with raid_disk equal to raid_disks. |
| * It is achieved by creating a new linear_private_data structure |
| * and swapping it in in-place of the current one. |
| * The current one is never freed until the array is stopped. |
| * This avoids races. |
| */ |
| struct linear_conf *newconf, *oldconf; |
| |
| if (rdev->saved_raid_disk != mddev->raid_disks) |
| return -EINVAL; |
| |
| rdev->raid_disk = rdev->saved_raid_disk; |
| rdev->saved_raid_disk = -1; |
| |
| newconf = linear_conf(mddev,mddev->raid_disks+1); |
| |
| if (!newconf) |
| return -ENOMEM; |
| |
| /* newconf->raid_disks already keeps a copy of * the increased |
| * value of mddev->raid_disks, WARN_ONCE() is just used to make |
| * sure of this. It is possible that oldconf is still referenced |
| * in linear_congested(), therefore kfree_rcu() is used to free |
| * oldconf until no one uses it anymore. |
| */ |
| mddev_suspend(mddev); |
| oldconf = rcu_dereference_protected(mddev->private, |
| lockdep_is_held(&mddev->reconfig_mutex)); |
| mddev->raid_disks++; |
| WARN_ONCE(mddev->raid_disks != newconf->raid_disks, |
| "copied raid_disks doesn't match mddev->raid_disks"); |
| rcu_assign_pointer(mddev->private, newconf); |
| md_set_array_sectors(mddev, linear_size(mddev, 0, 0)); |
| set_capacity(mddev->gendisk, mddev->array_sectors); |
| mddev_resume(mddev); |
| revalidate_disk(mddev->gendisk); |
| kfree_rcu(oldconf, rcu); |
| return 0; |
| } |
| |
| static void linear_free(struct mddev *mddev, void *priv) |
| { |
| struct linear_conf *conf = priv; |
| |
| kfree(conf); |
| } |
| |
| static bool linear_make_request(struct mddev *mddev, struct bio *bio) |
| { |
| char b[BDEVNAME_SIZE]; |
| struct dev_info *tmp_dev; |
| sector_t start_sector, end_sector, data_offset; |
| sector_t bio_sector = bio->bi_iter.bi_sector; |
| |
| if (unlikely(bio->bi_opf & REQ_PREFLUSH)) { |
| md_flush_request(mddev, bio); |
| return true; |
| } |
| |
| tmp_dev = which_dev(mddev, bio_sector); |
| start_sector = tmp_dev->end_sector - tmp_dev->rdev->sectors; |
| end_sector = tmp_dev->end_sector; |
| data_offset = tmp_dev->rdev->data_offset; |
| |
| if (unlikely(bio_sector >= end_sector || |
| bio_sector < start_sector)) |
| goto out_of_bounds; |
| |
| if (unlikely(bio_end_sector(bio) > end_sector)) { |
| /* This bio crosses a device boundary, so we have to split it */ |
| struct bio *split = bio_split(bio, end_sector - bio_sector, |
| GFP_NOIO, &mddev->bio_set); |
| bio_chain(split, bio); |
| generic_make_request(bio); |
| bio = split; |
| } |
| |
| bio_set_dev(bio, tmp_dev->rdev->bdev); |
| bio->bi_iter.bi_sector = bio->bi_iter.bi_sector - |
| start_sector + data_offset; |
| |
| if (unlikely((bio_op(bio) == REQ_OP_DISCARD) && |
| !blk_queue_discard(bio->bi_disk->queue))) { |
| /* Just ignore it */ |
| bio_endio(bio); |
| } else { |
| if (mddev->gendisk) |
| trace_block_bio_remap(bio->bi_disk->queue, |
| bio, disk_devt(mddev->gendisk), |
| bio_sector); |
| mddev_check_writesame(mddev, bio); |
| mddev_check_write_zeroes(mddev, bio); |
| generic_make_request(bio); |
| } |
| return true; |
| |
| out_of_bounds: |
| pr_err("md/linear:%s: make_request: Sector %llu out of bounds on dev %s: %llu sectors, offset %llu\n", |
| mdname(mddev), |
| (unsigned long long)bio->bi_iter.bi_sector, |
| bdevname(tmp_dev->rdev->bdev, b), |
| (unsigned long long)tmp_dev->rdev->sectors, |
| (unsigned long long)start_sector); |
| bio_io_error(bio); |
| return true; |
| } |
| |
| static void linear_status (struct seq_file *seq, struct mddev *mddev) |
| { |
| seq_printf(seq, " %dk rounding", mddev->chunk_sectors / 2); |
| } |
| |
| static void linear_quiesce(struct mddev *mddev, int state) |
| { |
| } |
| |
| static struct md_personality linear_personality = |
| { |
| .name = "linear", |
| .level = LEVEL_LINEAR, |
| .owner = THIS_MODULE, |
| .make_request = linear_make_request, |
| .run = linear_run, |
| .free = linear_free, |
| .status = linear_status, |
| .hot_add_disk = linear_add, |
| .size = linear_size, |
| .quiesce = linear_quiesce, |
| .congested = linear_congested, |
| }; |
| |
| static int __init linear_init (void) |
| { |
| return register_md_personality (&linear_personality); |
| } |
| |
| static void linear_exit (void) |
| { |
| unregister_md_personality (&linear_personality); |
| } |
| |
| module_init(linear_init); |
| module_exit(linear_exit); |
| MODULE_LICENSE("GPL"); |
| MODULE_DESCRIPTION("Linear device concatenation personality for MD"); |
| MODULE_ALIAS("md-personality-1"); /* LINEAR - deprecated*/ |
| MODULE_ALIAS("md-linear"); |
| MODULE_ALIAS("md-level--1"); |