blob: 49ede6c14ff3e61d4ab56785c94790955e4e4c62 [file] [log] [blame]
// SPDX-License-Identifier: GPL-2.0
#include <dt-bindings/clock/jz4770-cgu.h>
/ {
#address-cells = <1>;
#size-cells = <1>;
compatible = "ingenic,jz4770";
cpuintc: interrupt-controller {
#address-cells = <0>;
#interrupt-cells = <1>;
interrupt-controller;
compatible = "mti,cpu-interrupt-controller";
};
intc: interrupt-controller@10001000 {
compatible = "ingenic,jz4770-intc";
reg = <0x10001000 0x40>;
interrupt-controller;
#interrupt-cells = <1>;
interrupt-parent = <&cpuintc>;
interrupts = <2>;
};
ext: ext {
compatible = "fixed-clock";
#clock-cells = <0>;
};
osc32k: osc32k {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <32768>;
};
cgu: jz4770-cgu@10000000 {
compatible = "ingenic,jz4770-cgu";
reg = <0x10000000 0x100>;
clocks = <&ext>, <&osc32k>;
clock-names = "ext", "osc32k";
#clock-cells = <1>;
};
pinctrl: pin-controller@10010000 {
compatible = "ingenic,jz4770-pinctrl";
reg = <0x10010000 0x600>;
#address-cells = <1>;
#size-cells = <0>;
gpa: gpio@0 {
compatible = "ingenic,jz4770-gpio";
reg = <0>;
gpio-controller;
gpio-ranges = <&pinctrl 0 0 32>;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
interrupt-parent = <&intc>;
interrupts = <17>;
};
gpb: gpio@1 {
compatible = "ingenic,jz4770-gpio";
reg = <1>;
gpio-controller;
gpio-ranges = <&pinctrl 0 32 32>;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
interrupt-parent = <&intc>;
interrupts = <16>;
};
gpc: gpio@2 {
compatible = "ingenic,jz4770-gpio";
reg = <2>;
gpio-controller;
gpio-ranges = <&pinctrl 0 64 32>;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
interrupt-parent = <&intc>;
interrupts = <15>;
};
gpd: gpio@3 {
compatible = "ingenic,jz4770-gpio";
reg = <3>;
gpio-controller;
gpio-ranges = <&pinctrl 0 96 32>;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
interrupt-parent = <&intc>;
interrupts = <14>;
};
gpe: gpio@4 {
compatible = "ingenic,jz4770-gpio";
reg = <4>;
gpio-controller;
gpio-ranges = <&pinctrl 0 128 32>;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
interrupt-parent = <&intc>;
interrupts = <13>;
};
gpf: gpio@5 {
compatible = "ingenic,jz4770-gpio";
reg = <5>;
gpio-controller;
gpio-ranges = <&pinctrl 0 160 32>;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
interrupt-parent = <&intc>;
interrupts = <12>;
};
};
uart0: serial@10030000 {
compatible = "ingenic,jz4770-uart";
reg = <0x10030000 0x100>;
clocks = <&ext>, <&cgu JZ4770_CLK_UART0>;
clock-names = "baud", "module";
interrupt-parent = <&intc>;
interrupts = <5>;
status = "disabled";
};
uart1: serial@10031000 {
compatible = "ingenic,jz4770-uart";
reg = <0x10031000 0x100>;
clocks = <&ext>, <&cgu JZ4770_CLK_UART1>;
clock-names = "baud", "module";
interrupt-parent = <&intc>;
interrupts = <4>;
status = "disabled";
};
uart2: serial@10032000 {
compatible = "ingenic,jz4770-uart";
reg = <0x10032000 0x100>;
clocks = <&ext>, <&cgu JZ4770_CLK_UART2>;
clock-names = "baud", "module";
interrupt-parent = <&intc>;
interrupts = <3>;
status = "disabled";
};
uart3: serial@10033000 {
compatible = "ingenic,jz4770-uart";
reg = <0x10033000 0x100>;
clocks = <&ext>, <&cgu JZ4770_CLK_UART3>;
clock-names = "baud", "module";
interrupt-parent = <&intc>;
interrupts = <2>;
status = "disabled";
};
dmac0: dma-controller@13420000 {
compatible = "ingenic,jz4770-dma";
reg = <0x13420000 0xC0
0x13420300 0x20>;
#dma-cells = <1>;
clocks = <&cgu JZ4770_CLK_DMA>;
interrupt-parent = <&intc>;
interrupts = <24>;
/* Disable dmac0 until we have something that uses it */
status = "disabled";
};
dmac1: dma-controller@13420100 {
compatible = "ingenic,jz4770-dma";
reg = <0x13420100 0xC0
0x13420400 0x20>;
#dma-cells = <1>;
clocks = <&cgu JZ4770_CLK_DMA>;
interrupt-parent = <&intc>;
interrupts = <23>;
/* Disable dmac1 until we have something that uses it */
status = "disabled";
};
uhc: uhc@13430000 {
compatible = "generic-ohci";
reg = <0x13430000 0x1000>;
clocks = <&cgu JZ4770_CLK_UHC>, <&cgu JZ4770_CLK_UHC_PHY>;
assigned-clocks = <&cgu JZ4770_CLK_UHC>;
assigned-clock-rates = <48000000>;
interrupt-parent = <&intc>;
interrupts = <20>;
status = "disabled";
};
};