| // SPDX-License-Identifier: GPL-2.0+ |
| // |
| // Copyright 2012 Freescale Semiconductor, Inc. |
| // Copyright 2011 Linaro Ltd. |
| |
| #include <dt-bindings/clock/imx6qdl-clock.h> |
| #include <dt-bindings/gpio/gpio.h> |
| #include <dt-bindings/input/input.h> |
| |
| / { |
| chosen { |
| stdout-path = &uart1; |
| }; |
| |
| memory@10000000 { |
| device_type = "memory"; |
| reg = <0x10000000 0x40000000>; |
| }; |
| |
| reg_usb_otg_vbus: regulator-usb-otg-vbus { |
| compatible = "regulator-fixed"; |
| regulator-name = "usb_otg_vbus"; |
| regulator-min-microvolt = <5000000>; |
| regulator-max-microvolt = <5000000>; |
| gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>; |
| enable-active-high; |
| vin-supply = <&swbst_reg>; |
| }; |
| |
| reg_usb_h1_vbus: regulator-usb-h1-vbus { |
| compatible = "regulator-fixed"; |
| regulator-name = "usb_h1_vbus"; |
| regulator-min-microvolt = <5000000>; |
| regulator-max-microvolt = <5000000>; |
| gpio = <&gpio1 29 GPIO_ACTIVE_HIGH>; |
| enable-active-high; |
| vin-supply = <&swbst_reg>; |
| }; |
| |
| reg_audio: regulator-audio { |
| compatible = "regulator-fixed"; |
| regulator-name = "wm8962-supply"; |
| gpio = <&gpio4 10 GPIO_ACTIVE_HIGH>; |
| enable-active-high; |
| }; |
| |
| reg_pcie: regulator-pcie { |
| compatible = "regulator-fixed"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_pcie_reg>; |
| regulator-name = "MPCIE_3V3"; |
| regulator-min-microvolt = <3300000>; |
| regulator-max-microvolt = <3300000>; |
| gpio = <&gpio3 19 GPIO_ACTIVE_HIGH>; |
| enable-active-high; |
| }; |
| |
| reg_sensors: regulator-sensors { |
| compatible = "regulator-fixed"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_sensors_reg>; |
| regulator-name = "sensors-supply"; |
| regulator-min-microvolt = <3300000>; |
| regulator-max-microvolt = <3300000>; |
| gpio = <&gpio2 31 GPIO_ACTIVE_HIGH>; |
| enable-active-high; |
| }; |
| |
| gpio-keys { |
| compatible = "gpio-keys"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_gpio_keys>; |
| |
| power { |
| label = "Power Button"; |
| gpios = <&gpio3 29 GPIO_ACTIVE_LOW>; |
| wakeup-source; |
| linux,code = <KEY_POWER>; |
| }; |
| |
| volume-up { |
| label = "Volume Up"; |
| gpios = <&gpio1 4 GPIO_ACTIVE_LOW>; |
| wakeup-source; |
| linux,code = <KEY_VOLUMEUP>; |
| }; |
| |
| volume-down { |
| label = "Volume Down"; |
| gpios = <&gpio1 5 GPIO_ACTIVE_LOW>; |
| wakeup-source; |
| linux,code = <KEY_VOLUMEDOWN>; |
| }; |
| }; |
| |
| sound { |
| compatible = "fsl,imx6q-sabresd-wm8962", |
| "fsl,imx-audio-wm8962"; |
| model = "wm8962-audio"; |
| ssi-controller = <&ssi2>; |
| audio-codec = <&codec>; |
| audio-routing = |
| "Headphone Jack", "HPOUTL", |
| "Headphone Jack", "HPOUTR", |
| "Ext Spk", "SPKOUTL", |
| "Ext Spk", "SPKOUTR", |
| "AMIC", "MICBIAS", |
| "IN3R", "AMIC"; |
| mux-int-port = <2>; |
| mux-ext-port = <3>; |
| }; |
| |
| backlight_lvds: backlight-lvds { |
| compatible = "pwm-backlight"; |
| pwms = <&pwm1 0 5000000>; |
| brightness-levels = <0 4 8 16 32 64 128 255>; |
| default-brightness-level = <7>; |
| status = "okay"; |
| }; |
| |
| leds { |
| compatible = "gpio-leds"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_gpio_leds>; |
| |
| red { |
| gpios = <&gpio1 2 0>; |
| default-state = "on"; |
| }; |
| }; |
| |
| panel { |
| compatible = "hannstar,hsd100pxn1"; |
| backlight = <&backlight_lvds>; |
| |
| port { |
| panel_in: endpoint { |
| remote-endpoint = <&lvds0_out>; |
| }; |
| }; |
| }; |
| }; |
| |
| &ipu1_csi0_from_ipu1_csi0_mux { |
| bus-width = <8>; |
| data-shift = <12>; /* Lines 19:12 used */ |
| hsync-active = <1>; |
| vsync-active = <1>; |
| }; |
| |
| &ipu1_csi0_mux_from_parallel_sensor { |
| remote-endpoint = <&ov5642_to_ipu1_csi0_mux>; |
| }; |
| |
| &ipu1_csi0 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_ipu1_csi0>; |
| }; |
| |
| &mipi_csi { |
| status = "okay"; |
| |
| port@0 { |
| reg = <0>; |
| |
| mipi_csi2_in: endpoint { |
| remote-endpoint = <&ov5640_to_mipi_csi2>; |
| clock-lanes = <0>; |
| data-lanes = <1 2>; |
| }; |
| }; |
| }; |
| |
| &audmux { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_audmux>; |
| status = "okay"; |
| }; |
| |
| &clks { |
| assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>, |
| <&clks IMX6QDL_CLK_LDB_DI1_SEL>; |
| assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>, |
| <&clks IMX6QDL_CLK_PLL3_USB_OTG>; |
| }; |
| |
| &ecspi1 { |
| cs-gpios = <&gpio4 9 0>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_ecspi1>; |
| status = "okay"; |
| |
| flash: m25p80@0 { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| compatible = "st,m25p32", "jedec,spi-nor"; |
| spi-max-frequency = <20000000>; |
| reg = <0>; |
| }; |
| }; |
| |
| &fec { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_enet>; |
| phy-mode = "rgmii"; |
| phy-reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>; |
| status = "okay"; |
| }; |
| |
| &hdmi { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_hdmi_cec>; |
| ddc-i2c-bus = <&i2c2>; |
| status = "okay"; |
| }; |
| |
| &i2c1 { |
| clock-frequency = <100000>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_i2c1>; |
| status = "okay"; |
| |
| codec: wm8962@1a { |
| compatible = "wlf,wm8962"; |
| reg = <0x1a>; |
| clocks = <&clks IMX6QDL_CLK_CKO>; |
| DCVDD-supply = <®_audio>; |
| DBVDD-supply = <®_audio>; |
| AVDD-supply = <®_audio>; |
| CPVDD-supply = <®_audio>; |
| MICVDD-supply = <®_audio>; |
| PLLVDD-supply = <®_audio>; |
| SPKVDD1-supply = <®_audio>; |
| SPKVDD2-supply = <®_audio>; |
| gpio-cfg = < |
| 0x0000 /* 0:Default */ |
| 0x0000 /* 1:Default */ |
| 0x0013 /* 2:FN_DMICCLK */ |
| 0x0000 /* 3:Default */ |
| 0x8014 /* 4:FN_DMICCDAT */ |
| 0x0000 /* 5:Default */ |
| >; |
| }; |
| |
| accelerometer@1c { |
| compatible = "fsl,mma8451"; |
| reg = <0x1c>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_i2c1_mma8451_int>; |
| interrupt-parent = <&gpio1>; |
| interrupts = <18 IRQ_TYPE_LEVEL_LOW>; |
| vdd-supply = <®_sensors>; |
| vddio-supply = <®_sensors>; |
| }; |
| |
| ov5642: camera@3c { |
| compatible = "ovti,ov5642"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_ov5642>; |
| clocks = <&clks IMX6QDL_CLK_CKO>; |
| clock-names = "xclk"; |
| reg = <0x3c>; |
| DOVDD-supply = <&vgen4_reg>; /* 1.8v */ |
| AVDD-supply = <&vgen3_reg>; /* 2.8v, rev C board is VGEN3 |
| rev B board is VGEN5 */ |
| DVDD-supply = <&vgen2_reg>; /* 1.5v*/ |
| powerdown-gpios = <&gpio1 16 GPIO_ACTIVE_HIGH>; |
| reset-gpios = <&gpio1 17 GPIO_ACTIVE_LOW>; |
| status = "disabled"; |
| |
| port { |
| ov5642_to_ipu1_csi0_mux: endpoint { |
| remote-endpoint = <&ipu1_csi0_mux_from_parallel_sensor>; |
| bus-width = <8>; |
| hsync-active = <1>; |
| vsync-active = <1>; |
| }; |
| }; |
| }; |
| }; |
| |
| &i2c2 { |
| clock-frequency = <100000>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_i2c2>; |
| status = "okay"; |
| |
| touchscreen@4 { |
| compatible = "eeti,egalax_ts"; |
| reg = <0x04>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_i2c2_egalax_int>; |
| interrupt-parent = <&gpio6>; |
| interrupts = <8 IRQ_TYPE_EDGE_FALLING>; |
| wakeup-gpios = <&gpio6 8 GPIO_ACTIVE_HIGH>; |
| }; |
| |
| ov5640: camera@3c { |
| compatible = "ovti,ov5640"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_ov5640>; |
| reg = <0x3c>; |
| clocks = <&clks IMX6QDL_CLK_CKO>; |
| clock-names = "xclk"; |
| DOVDD-supply = <&vgen4_reg>; /* 1.8v */ |
| AVDD-supply = <&vgen3_reg>; /* 2.8v, rev C board is VGEN3 |
| rev B board is VGEN5 */ |
| DVDD-supply = <&vgen2_reg>; /* 1.5v*/ |
| powerdown-gpios = <&gpio1 19 GPIO_ACTIVE_HIGH>; |
| reset-gpios = <&gpio1 20 GPIO_ACTIVE_LOW>; |
| |
| port { |
| ov5640_to_mipi_csi2: endpoint { |
| remote-endpoint = <&mipi_csi2_in>; |
| clock-lanes = <0>; |
| data-lanes = <1 2>; |
| }; |
| }; |
| }; |
| |
| pmic: pfuze100@8 { |
| compatible = "fsl,pfuze100"; |
| reg = <0x08>; |
| |
| regulators { |
| sw1a_reg: sw1ab { |
| regulator-min-microvolt = <300000>; |
| regulator-max-microvolt = <1875000>; |
| regulator-boot-on; |
| regulator-always-on; |
| regulator-ramp-delay = <6250>; |
| }; |
| |
| sw1c_reg: sw1c { |
| regulator-min-microvolt = <300000>; |
| regulator-max-microvolt = <1875000>; |
| regulator-boot-on; |
| regulator-always-on; |
| regulator-ramp-delay = <6250>; |
| }; |
| |
| sw2_reg: sw2 { |
| regulator-min-microvolt = <800000>; |
| regulator-max-microvolt = <3300000>; |
| regulator-boot-on; |
| regulator-always-on; |
| regulator-ramp-delay = <6250>; |
| }; |
| |
| sw3a_reg: sw3a { |
| regulator-min-microvolt = <400000>; |
| regulator-max-microvolt = <1975000>; |
| regulator-boot-on; |
| regulator-always-on; |
| }; |
| |
| sw3b_reg: sw3b { |
| regulator-min-microvolt = <400000>; |
| regulator-max-microvolt = <1975000>; |
| regulator-boot-on; |
| regulator-always-on; |
| }; |
| |
| sw4_reg: sw4 { |
| regulator-min-microvolt = <800000>; |
| regulator-max-microvolt = <3300000>; |
| regulator-always-on; |
| }; |
| |
| swbst_reg: swbst { |
| regulator-min-microvolt = <5000000>; |
| regulator-max-microvolt = <5150000>; |
| }; |
| |
| snvs_reg: vsnvs { |
| regulator-min-microvolt = <1000000>; |
| regulator-max-microvolt = <3000000>; |
| regulator-boot-on; |
| regulator-always-on; |
| }; |
| |
| vref_reg: vrefddr { |
| regulator-boot-on; |
| regulator-always-on; |
| }; |
| |
| vgen1_reg: vgen1 { |
| regulator-min-microvolt = <800000>; |
| regulator-max-microvolt = <1550000>; |
| }; |
| |
| vgen2_reg: vgen2 { |
| regulator-min-microvolt = <800000>; |
| regulator-max-microvolt = <1550000>; |
| }; |
| |
| vgen3_reg: vgen3 { |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <3300000>; |
| }; |
| |
| vgen4_reg: vgen4 { |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <3300000>; |
| regulator-always-on; |
| }; |
| |
| vgen5_reg: vgen5 { |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <3300000>; |
| regulator-always-on; |
| }; |
| |
| vgen6_reg: vgen6 { |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <3300000>; |
| regulator-always-on; |
| }; |
| }; |
| }; |
| }; |
| |
| &i2c3 { |
| clock-frequency = <100000>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_i2c3>; |
| status = "okay"; |
| |
| egalax_ts@4 { |
| compatible = "eeti,egalax_ts"; |
| reg = <0x04>; |
| interrupt-parent = <&gpio6>; |
| interrupts = <7 2>; |
| wakeup-gpios = <&gpio6 7 0>; |
| }; |
| |
| magnetometer@e { |
| compatible = "fsl,mag3110"; |
| reg = <0x0e>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_i2c3_mag3110_int>; |
| interrupt-parent = <&gpio3>; |
| interrupts = <16 IRQ_TYPE_EDGE_RISING>; |
| vdd-supply = <®_sensors>; |
| vddio-supply = <®_sensors>; |
| }; |
| |
| light-sensor@44 { |
| compatible = "isil,isl29023"; |
| reg = <0x44>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_i2c3_isl29023_int>; |
| interrupt-parent = <&gpio3>; |
| interrupts = <9 IRQ_TYPE_EDGE_FALLING>; |
| vcc-supply = <®_sensors>; |
| }; |
| }; |
| |
| &iomuxc { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_hog>; |
| |
| imx6qdl-sabresd { |
| pinctrl_hog: hoggrp { |
| fsl,pins = < |
| MX6QDL_PAD_NANDF_D0__GPIO2_IO00 0x1b0b0 |
| MX6QDL_PAD_NANDF_D1__GPIO2_IO01 0x1b0b0 |
| MX6QDL_PAD_NANDF_D2__GPIO2_IO02 0x1b0b0 |
| MX6QDL_PAD_NANDF_D3__GPIO2_IO03 0x1b0b0 |
| MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x130b0 |
| MX6QDL_PAD_NANDF_CLE__GPIO6_IO07 0x1b0b0 |
| MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x1b0b0 |
| MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b0 |
| MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25 0x1b0b0 |
| >; |
| }; |
| |
| pinctrl_audmux: audmuxgrp { |
| fsl,pins = < |
| MX6QDL_PAD_CSI0_DAT7__AUD3_RXD 0x130b0 |
| MX6QDL_PAD_CSI0_DAT4__AUD3_TXC 0x130b0 |
| MX6QDL_PAD_CSI0_DAT5__AUD3_TXD 0x110b0 |
| MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS 0x130b0 |
| >; |
| }; |
| |
| pinctrl_ecspi1: ecspi1grp { |
| fsl,pins = < |
| MX6QDL_PAD_KEY_COL1__ECSPI1_MISO 0x100b1 |
| MX6QDL_PAD_KEY_ROW0__ECSPI1_MOSI 0x100b1 |
| MX6QDL_PAD_KEY_COL0__ECSPI1_SCLK 0x100b1 |
| MX6QDL_PAD_KEY_ROW1__GPIO4_IO09 0x1b0b0 |
| >; |
| }; |
| |
| pinctrl_enet: enetgrp { |
| fsl,pins = < |
| MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0 |
| MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 |
| MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b030 |
| MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b030 |
| MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b030 |
| MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b030 |
| MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b030 |
| MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b030 |
| MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0 |
| MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b030 |
| MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b030 |
| MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b030 |
| MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b030 |
| MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b030 |
| MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b030 |
| MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8 |
| >; |
| }; |
| |
| pinctrl_gpio_keys: gpio_keysgrp { |
| fsl,pins = < |
| MX6QDL_PAD_EIM_D29__GPIO3_IO29 0x1b0b0 |
| MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x1b0b0 |
| MX6QDL_PAD_GPIO_5__GPIO1_IO05 0x1b0b0 |
| >; |
| }; |
| |
| pinctrl_hdmi_cec: hdmicecgrp { |
| fsl,pins = < |
| MX6QDL_PAD_KEY_ROW2__HDMI_TX_CEC_LINE 0x1f8b0 |
| >; |
| }; |
| |
| pinctrl_i2c1: i2c1grp { |
| fsl,pins = < |
| MX6QDL_PAD_CSI0_DAT8__I2C1_SDA 0x4001b8b1 |
| MX6QDL_PAD_CSI0_DAT9__I2C1_SCL 0x4001b8b1 |
| >; |
| }; |
| |
| pinctrl_i2c1_mma8451_int: i2c1mma8451intgrp { |
| fsl,pins = < |
| MX6QDL_PAD_SD1_CMD__GPIO1_IO18 0xb0b1 |
| >; |
| }; |
| |
| pinctrl_i2c2: i2c2grp { |
| fsl,pins = < |
| MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 |
| MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 |
| >; |
| }; |
| |
| pinctrl_i2c2_egalax_int: i2c2egalaxintgrp { |
| fsl,pins = < |
| MX6QDL_PAD_NANDF_ALE__GPIO6_IO08 0x1b0b0 |
| >; |
| }; |
| |
| pinctrl_i2c3: i2c3grp { |
| fsl,pins = < |
| MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1 |
| MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1 |
| >; |
| }; |
| |
| pinctrl_i2c3_isl29023_int: i2c3isl29023intgrp { |
| fsl,pins = < |
| MX6QDL_PAD_EIM_DA9__GPIO3_IO09 0xb0b1 |
| >; |
| }; |
| |
| pinctrl_i2c3_mag3110_int: i2c3mag3110intgrp { |
| fsl,pins = < |
| MX6QDL_PAD_EIM_D16__GPIO3_IO16 0xb0b1 |
| >; |
| }; |
| |
| pinctrl_ipu1_csi0: ipu1csi0grp { |
| fsl,pins = < |
| MX6QDL_PAD_CSI0_DAT12__IPU1_CSI0_DATA12 0x1b0b0 |
| MX6QDL_PAD_CSI0_DAT13__IPU1_CSI0_DATA13 0x1b0b0 |
| MX6QDL_PAD_CSI0_DAT14__IPU1_CSI0_DATA14 0x1b0b0 |
| MX6QDL_PAD_CSI0_DAT15__IPU1_CSI0_DATA15 0x1b0b0 |
| MX6QDL_PAD_CSI0_DAT16__IPU1_CSI0_DATA16 0x1b0b0 |
| MX6QDL_PAD_CSI0_DAT17__IPU1_CSI0_DATA17 0x1b0b0 |
| MX6QDL_PAD_CSI0_DAT18__IPU1_CSI0_DATA18 0x1b0b0 |
| MX6QDL_PAD_CSI0_DAT19__IPU1_CSI0_DATA19 0x1b0b0 |
| MX6QDL_PAD_CSI0_PIXCLK__IPU1_CSI0_PIXCLK 0x1b0b0 |
| MX6QDL_PAD_CSI0_MCLK__IPU1_CSI0_HSYNC 0x1b0b0 |
| MX6QDL_PAD_CSI0_VSYNC__IPU1_CSI0_VSYNC 0x1b0b0 |
| >; |
| }; |
| |
| pinctrl_ov5640: ov5640grp { |
| fsl,pins = < |
| MX6QDL_PAD_SD1_DAT2__GPIO1_IO19 0x1b0b0 |
| MX6QDL_PAD_SD1_CLK__GPIO1_IO20 0x1b0b0 |
| >; |
| }; |
| |
| pinctrl_ov5642: ov5642grp { |
| fsl,pins = < |
| MX6QDL_PAD_SD1_DAT0__GPIO1_IO16 0x1b0b0 |
| MX6QDL_PAD_SD1_DAT1__GPIO1_IO17 0x1b0b0 |
| >; |
| }; |
| |
| pinctrl_pcie: pciegrp { |
| fsl,pins = < |
| MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x1b0b0 |
| >; |
| }; |
| |
| pinctrl_pcie_reg: pciereggrp { |
| fsl,pins = < |
| MX6QDL_PAD_EIM_D19__GPIO3_IO19 0x1b0b0 |
| >; |
| }; |
| |
| pinctrl_pwm1: pwm1grp { |
| fsl,pins = < |
| MX6QDL_PAD_SD1_DAT3__PWM1_OUT 0x1b0b1 |
| >; |
| }; |
| |
| pinctrl_sensors_reg: sensorsreggrp { |
| fsl,pins = < |
| MX6QDL_PAD_EIM_EB3__GPIO2_IO31 0x1b0b0 |
| >; |
| }; |
| |
| pinctrl_uart1: uart1grp { |
| fsl,pins = < |
| MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0b1 |
| MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1 |
| >; |
| }; |
| |
| pinctrl_usbotg: usbotggrp { |
| fsl,pins = < |
| MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID 0x17059 |
| >; |
| }; |
| |
| pinctrl_usdhc2: usdhc2grp { |
| fsl,pins = < |
| MX6QDL_PAD_SD2_CMD__SD2_CMD 0x17059 |
| MX6QDL_PAD_SD2_CLK__SD2_CLK 0x10059 |
| MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059 |
| MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059 |
| MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059 |
| MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17059 |
| MX6QDL_PAD_NANDF_D4__SD2_DATA4 0x17059 |
| MX6QDL_PAD_NANDF_D5__SD2_DATA5 0x17059 |
| MX6QDL_PAD_NANDF_D6__SD2_DATA6 0x17059 |
| MX6QDL_PAD_NANDF_D7__SD2_DATA7 0x17059 |
| >; |
| }; |
| |
| pinctrl_usdhc3: usdhc3grp { |
| fsl,pins = < |
| MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059 |
| MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059 |
| MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059 |
| MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059 |
| MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059 |
| MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059 |
| MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x17059 |
| MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x17059 |
| MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x17059 |
| MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x17059 |
| >; |
| }; |
| |
| pinctrl_usdhc4: usdhc4grp { |
| fsl,pins = < |
| MX6QDL_PAD_SD4_CMD__SD4_CMD 0x17059 |
| MX6QDL_PAD_SD4_CLK__SD4_CLK 0x10059 |
| MX6QDL_PAD_SD4_DAT0__SD4_DATA0 0x17059 |
| MX6QDL_PAD_SD4_DAT1__SD4_DATA1 0x17059 |
| MX6QDL_PAD_SD4_DAT2__SD4_DATA2 0x17059 |
| MX6QDL_PAD_SD4_DAT3__SD4_DATA3 0x17059 |
| MX6QDL_PAD_SD4_DAT4__SD4_DATA4 0x17059 |
| MX6QDL_PAD_SD4_DAT5__SD4_DATA5 0x17059 |
| MX6QDL_PAD_SD4_DAT6__SD4_DATA6 0x17059 |
| MX6QDL_PAD_SD4_DAT7__SD4_DATA7 0x17059 |
| >; |
| }; |
| |
| pinctrl_wdog: wdoggrp { |
| fsl,pins = < |
| MX6QDL_PAD_GPIO_1__WDOG2_B 0x1b0b0 |
| >; |
| }; |
| }; |
| |
| gpio_leds { |
| pinctrl_gpio_leds: gpioledsgrp { |
| fsl,pins = < |
| MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x1b0b0 |
| >; |
| }; |
| }; |
| }; |
| |
| &ldb { |
| status = "okay"; |
| |
| lvds-channel@1 { |
| fsl,data-mapping = "spwg"; |
| fsl,data-width = <18>; |
| status = "okay"; |
| |
| port@4 { |
| reg = <4>; |
| |
| lvds0_out: endpoint { |
| remote-endpoint = <&panel_in>; |
| }; |
| }; |
| }; |
| }; |
| |
| &pcie { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_pcie>; |
| reset-gpio = <&gpio7 12 GPIO_ACTIVE_LOW>; |
| vpcie-supply = <®_pcie>; |
| status = "okay"; |
| }; |
| |
| &pwm1 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_pwm1>; |
| status = "okay"; |
| }; |
| |
| ®_arm { |
| vin-supply = <&sw1a_reg>; |
| }; |
| |
| ®_pu { |
| vin-supply = <&sw1c_reg>; |
| }; |
| |
| ®_soc { |
| vin-supply = <&sw1c_reg>; |
| }; |
| |
| &snvs_poweroff { |
| status = "okay"; |
| }; |
| |
| &ssi2 { |
| status = "okay"; |
| }; |
| |
| &uart1 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_uart1>; |
| status = "okay"; |
| }; |
| |
| &usbh1 { |
| vbus-supply = <®_usb_h1_vbus>; |
| status = "okay"; |
| }; |
| |
| &usbotg { |
| vbus-supply = <®_usb_otg_vbus>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_usbotg>; |
| disable-over-current; |
| status = "okay"; |
| }; |
| |
| &usdhc2 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_usdhc2>; |
| bus-width = <8>; |
| cd-gpios = <&gpio2 2 GPIO_ACTIVE_LOW>; |
| wp-gpios = <&gpio2 3 GPIO_ACTIVE_HIGH>; |
| status = "okay"; |
| }; |
| |
| &usdhc3 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_usdhc3>; |
| bus-width = <8>; |
| cd-gpios = <&gpio2 0 GPIO_ACTIVE_LOW>; |
| wp-gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>; |
| status = "okay"; |
| }; |
| |
| &usdhc4 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_usdhc4>; |
| bus-width = <8>; |
| non-removable; |
| no-1-8-v; |
| status = "okay"; |
| }; |
| |
| &wdog1 { |
| status = "disabled"; |
| }; |
| |
| &wdog2 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_wdog>; |
| fsl,ext-reset-output; |
| status = "okay"; |
| }; |