| // SPDX-License-Identifier: (GPL-2.0 or MIT) |
| // |
| // Copyright (C) 2018 emtrion GmbH |
| // |
| |
| #include <dt-bindings/gpio/gpio.h> |
| #include <dt-bindings/pwm/pwm.h> |
| #include <dt-bindings/input/input.h> |
| |
| / { |
| |
| model = "emtrion SoM emCON-MX6"; |
| compatible = "emtrion,emcon-mx6"; |
| |
| aliases { |
| mmc0 = &usdhc3; |
| mmc1 = &usdhc2; |
| mmc2 = &usdhc1; |
| rtc0 = &ds1307; |
| }; |
| |
| chosen { |
| stdout-path = &uart1; |
| }; |
| |
| memory@10000000 { |
| device_type = "memory"; |
| reg = <0x10000000 0x40000000>; |
| }; |
| |
| gpio-keys { |
| compatible = "gpio-keys"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_emcon_wake>; |
| |
| wake { |
| label = "Wake"; |
| linux,code = <KEY_WAKEUP>; |
| gpios = <&gpio3 2 GPIO_ACTIVE_LOW>; |
| wakeup-source; |
| }; |
| }; |
| |
| som_leds: leds { |
| compatible = "gpio-leds"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_som_leds>; |
| |
| green { |
| label = "som:green"; |
| gpios = <&gpio3 0 GPIO_ACTIVE_HIGH>; |
| linux,default-trigger = "heartbeat"; |
| default-state = "on"; |
| }; |
| |
| red { |
| label = "som:red"; |
| gpios = <&gpio3 1 GPIO_ACTIVE_LOW>; |
| default-state = "keep"; |
| }; |
| |
| }; |
| |
| lvds_backlight: lvds-backlight { |
| compatible = "pwm-backlight"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_lvds_bl>; |
| enable-gpios = <&gpio6 9 GPIO_ACTIVE_HIGH>; |
| pwms = <&pwm1 0 50000>; |
| brightness-levels = < |
| 0 4 8 16 32 64 80 96 112 |
| 128 144 160 176 250 |
| >; |
| default-brightness-level = <13>; |
| status = "okay"; |
| }; |
| |
| pwm_fan: pwm-fan { |
| compatible = "pwm-fan"; |
| cooling-min-state = <0>; |
| cooling-max-state = <4>; |
| #cooling-cells = <2>; |
| pwms = <&pwm4 0 50000>; |
| cooling-levels = <0 64 127 191 255>; |
| status = "disabled"; |
| }; |
| |
| |
| rgb_encoder: display { |
| compatible = "fsl,imx-parallel-display"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_rgb24_display>; |
| status = "disabled"; |
| |
| port@0 { |
| reg = <0>; |
| |
| rgb_encoder_in: endpoint { |
| remote-endpoint = <&ipu1_di0_disp0>; |
| }; |
| }; |
| |
| port@1 { |
| reg = <1>; |
| |
| rgb_encoder_out: endpoint { |
| remote-endpoint = <&rgb_panel_in>; |
| }; |
| }; |
| }; |
| |
| rgb_panel: lcd { |
| backlight = <&rgb_backlight>; |
| power-supply = <®_parallel_disp>; |
| |
| port { |
| rgb_panel_in: endpoint { |
| remote-endpoint = <&rgb_encoder_out>; |
| }; |
| }; |
| }; |
| |
| reg_parallel_disp: reg-parallel-display { |
| compatible = "regulator-fixed"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_rgb_bl_en>; |
| regulator-name = "LCD-Supply"; |
| regulator-min-microvolt = <5000000>; |
| regulator-max-microvolt = <5000000>; |
| gpio = <&gpio7 9 GPIO_ACTIVE_HIGH>; |
| enable-active-high; |
| }; |
| |
| reg_lvds_disp: reg-lvds-display { |
| compatible = "regulator-fixed"; |
| regulator-name = "LVDS-Supply"; |
| regulator-min-microvolt = <5000000>; |
| regulator-max-microvolt = <5000000>; |
| gpio = <&gpio7 10 GPIO_ACTIVE_HIGH>; |
| enable-active-high; |
| }; |
| |
| rgb_backlight: rgb-backlight { |
| compatible = "pwm-backlight"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_rgb_bl>; |
| enable-gpios = <&gpio6 8 GPIO_ACTIVE_HIGH>; |
| pwms = <&pwm3 0 5000000>; |
| brightness-levels = < |
| 250 176 160 144 128 112 |
| 96 80 64 48 32 16 8 1 |
| >; |
| default-brightness-level = <13>; |
| status = "okay"; |
| }; |
| }; |
| |
| &can1 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_can1>; |
| }; |
| |
| &can2 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_can2>; |
| }; |
| |
| &ecspi2 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_ecspi2>; |
| cs-gpios = <&gpio2 26 GPIO_ACTIVE_HIGH>, |
| <&gpio2 27 GPIO_ACTIVE_HIGH>; |
| }; |
| |
| &ecspi4 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_nor_flash>; |
| }; |
| |
| &fec { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_enet>; |
| phy-mode = "rgmii"; |
| phy-reset-gpios = <&gpio5 20 GPIO_ACTIVE_LOW>; |
| phy-reset-duration = <50>; |
| phy-supply = <&vdd_1V8_reg>; |
| phy-handle = <&ksz9031>; |
| status = "okay"; |
| |
| mdio { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| ksz9031: phy@0 { |
| compatible = "ethernet-phy-ieee802.3-c22"; |
| reg = <0>; |
| interrupt-parent = <&gpio1>; |
| interrupts = <30 IRQ_TYPE_EDGE_FALLING>; |
| rxdv-skew-ps = <480>; |
| txen-skew-ps = <480>; |
| rxd0-skew-ps = <480>; |
| rxd1-skew-ps = <480>; |
| rxd2-skew-ps = <480>; |
| rxd3-skew-ps = <480>; |
| txd0-skew-ps = <420>; |
| txd1-skew-ps = <420>; |
| txd2-skew-ps = <360>; |
| txd3-skew-ps = <360>; |
| txc-skew-ps = <1020>; |
| rxc-skew-ps = <960>; |
| }; |
| }; |
| }; |
| |
| &i2c1 { |
| clock-frequency = <100000>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_i2c1>; |
| status = "okay"; |
| |
| da9063: pmic@58 { |
| compatible = "dlg,da9063"; |
| reg = <0x58>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_pmic>; |
| interrupt-parent = <&gpio2>; |
| interrupts = <8 IRQ_TYPE_LEVEL_LOW>; |
| interrupt-controller; |
| |
| onkey { |
| compatible = "dlg,da9063-onkey"; |
| wakeup-source; |
| }; |
| |
| watchdog { |
| compatible = "dlg,da9063-watchdog"; |
| timeout-sec = <0>; |
| }; |
| |
| regulators { |
| vddcore_reg: bcore1 { |
| regulator-min-microvolt = <1100000>; |
| regulator-max-microvolt = <1450000>; |
| regulator-ramp-delay = <2>; |
| regulator-name = "DA9063_CORE"; |
| regulator-always-on; |
| }; |
| |
| vddsoc_reg: bcore2 { |
| regulator-min-microvolt = <1100000>; |
| regulator-max-microvolt = <1450000>; |
| regulator-ramp-delay = <2>; |
| regulator-name = "DA9063_SOC"; |
| regulator-always-on; |
| }; |
| |
| vdd_ddr3_reg: bpro { |
| regulator-min-microvolt = <1500000>; |
| regulator-max-microvolt = <1500000>; |
| regulator-ramp-delay = <2>; |
| regulator-always-on; |
| }; |
| |
| vdd_3v3_reg: bperi { |
| regulator-min-microvolt = <3300000>; |
| regulator-max-microvolt = <3300000>; |
| regulator-ramp-delay = <2>; |
| regulator-always-on; |
| }; |
| |
| vdd_sata_reg: ldo3 { |
| regulator-min-microvolt = <2500000>; |
| regulator-max-microvolt = <2500000>; |
| regulator-always-on; |
| }; |
| vdd_mipi_reg: ldo4 { |
| regulator-min-microvolt = <2500000>; |
| regulator-max-microvolt = <2500000>; |
| regulator-always-on; |
| }; |
| |
| vdd_mx6_snvs_reg: ldo5 { |
| regulator-min-microvolt = <3300000>; |
| regulator-max-microvolt = <3300000>; |
| regulator-always-on; |
| }; |
| |
| vdd_hdmi_reg: ldo6 { |
| regulator-min-microvolt = <2500000>; |
| regulator-max-microvolt = <2500000>; |
| regulator-always-on; |
| regulator-boot-on; |
| }; |
| |
| vdd_pcie_reg: ldo7 { |
| regulator-min-microvolt = <2500000>; |
| regulator-max-microvolt = <2500000>; |
| regulator-always-on; |
| }; |
| |
| vdd_1V8_reg: ldo8 { |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <1800000>; |
| regulator-always-on; |
| }; |
| |
| vdd_3V3_sdc_reg: ldo9 { |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <3300000>; |
| regulator-always-on; |
| }; |
| |
| vdd_1V2_reg: ldo10 { |
| regulator-min-microvolt = <1200000>; |
| regulator-max-microvolt = <1200000>; |
| regulator-always-on; |
| }; |
| }; |
| }; |
| |
| ds1307: rtc@68 { |
| compatible = "dallas,ds1307"; |
| reg = <0x68>; |
| }; |
| }; |
| |
| &i2c2 { |
| clock-frequency = <100000>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_i2c2>; |
| }; |
| |
| &iomuxc { |
| |
| pinctrl_audmux: audmuxgrp { |
| fsl,pins = < |
| MX6QDL_PAD_CSI0_DAT7__AUD3_RXD 0x130b0 |
| MX6QDL_PAD_CSI0_DAT4__AUD3_TXC 0x1b060 |
| MX6QDL_PAD_CSI0_DAT5__AUD3_TXD 0x130B0 |
| MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS 0x1b060 |
| >; |
| }; |
| |
| pinctrl_can1: can1grp { |
| fsl,pins = < |
| MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX 0x1b0b1 |
| MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX 0x1b0b1 |
| >; |
| }; |
| |
| pinctrl_can2: can2grp { |
| fsl,pins = < |
| MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX 0x1b0b1 |
| MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX 0x1b0b1 |
| >; |
| }; |
| |
| pinctrl_cpi1: csi0grp { |
| fsl,pins = < |
| MX6QDL_PAD_CSI0_PIXCLK__IPU1_CSI0_PIXCLK 0xb0b1 |
| MX6QDL_PAD_CSI0_MCLK__IPU1_CSI0_HSYNC 0x1b0b1 |
| MX6QDL_PAD_CSI0_VSYNC__IPU1_CSI0_VSYNC 0x1b0b1 |
| MX6QDL_PAD_CSI0_DAT12__IPU1_CSI0_DATA12 0x1b0b1 |
| MX6QDL_PAD_CSI0_DAT13__IPU1_CSI0_DATA13 0x1b0b1 |
| MX6QDL_PAD_CSI0_DAT14__IPU1_CSI0_DATA14 0x1b0b1 |
| MX6QDL_PAD_CSI0_DAT15__IPU1_CSI0_DATA15 0x1b0b1 |
| MX6QDL_PAD_CSI0_DAT16__IPU1_CSI0_DATA16 0x1b0b1 |
| MX6QDL_PAD_CSI0_DAT17__IPU1_CSI0_DATA17 0x1b0b1 |
| MX6QDL_PAD_CSI0_DAT18__IPU1_CSI0_DATA18 0x1b0b1 |
| MX6QDL_PAD_CSI0_DAT19__IPU1_CSI0_DATA19 0x1b0b1 |
| >; |
| }; |
| |
| /*camera2-pinctrl is in imx6q-emcon.dtsi or imx6dl-emcon.dtsi*/ |
| |
| pinctrl_ecspi2: ecspi2grp { |
| fsl,pins = < |
| MX6QDL_PAD_EIM_CS0__ECSPI2_SCLK 0x100b1 |
| MX6QDL_PAD_EIM_CS1__ECSPI2_MOSI 0x100b1 |
| MX6QDL_PAD_EIM_OE__ECSPI2_MISO 0x100b1 |
| MX6QDL_PAD_EIM_LBA__GPIO2_IO27 0x100b1 |
| MX6QDL_PAD_EIM_RW__GPIO2_IO26 0x100b1 |
| >; |
| }; |
| |
| pinctrl_emcon_gpio1: emcongpio1 { |
| fsl,pins = < |
| MX6QDL_PAD_NANDF_D0__GPIO2_IO00 0x0b0b1 |
| >; |
| }; |
| |
| pinctrl_emcon_gpio2: emcongpio2 { |
| fsl,pins = < |
| MX6QDL_PAD_NANDF_D1__GPIO2_IO01 0x0b0b1 |
| >; |
| }; |
| |
| pinctrl_emcon_gpio3: emcongpio3 { |
| fsl,pins = < |
| MX6QDL_PAD_NANDF_D2__GPIO2_IO02 0x0b0b1 |
| >; |
| }; |
| |
| pinctrl_emcon_gpio4: emcongpio4 { |
| fsl,pins = < |
| MX6QDL_PAD_NANDF_D3__GPIO2_IO03 0x0b0b1 |
| >; |
| }; |
| |
| pinctrl_emcon_gpio5: emcongpio5 { |
| fsl,pins = < |
| MX6QDL_PAD_NANDF_D4__GPIO2_IO04 0x0b0b1 |
| >; |
| }; |
| |
| pinctrl_emcon_gpio6: emcongpio6 { |
| fsl,pins = < |
| MX6QDL_PAD_NANDF_D5__GPIO2_IO05 0x0b0b1 |
| >; |
| }; |
| |
| pinctrl_emcon_gpio7: emcongpio7 { |
| fsl,pins = < |
| MX6QDL_PAD_NANDF_D6__GPIO2_IO06 0x0b0b1 |
| >; |
| }; |
| |
| pinctrl_emcon_gpio8: emcongpio8 { |
| fsl,pins = < |
| MX6QDL_PAD_NANDF_D7__GPIO2_IO07 0x0b0b1 |
| >; |
| }; |
| |
| pinctrl_emcon_irq_a: emconirqa { |
| fsl,pins = < |
| MX6QDL_PAD_NANDF_CLE__GPIO6_IO07 0x0b0b1 |
| >; |
| }; |
| |
| pinctrl_emcon_irq_b: emconirqb { |
| fsl,pins = < |
| MX6QDL_PAD_NANDF_CS2__GPIO6_IO15 0x0b0b1 |
| >; |
| }; |
| |
| pinctrl_emcon_irq_c: emconirqc { |
| fsl,pins = < |
| MX6QDL_PAD_NANDF_CS3__GPIO6_IO16 0x0b0b1 |
| >; |
| }; |
| |
| pinctrl_emcon_irq_pwr: emconirqpwr { |
| fsl,pins = < |
| MX6QDL_PAD_EIM_D23__GPIO3_IO23 0x0b0b1 |
| >; |
| }; |
| |
| pinctrl_emcon_wake: emconwake { |
| fsl,pins = < |
| MX6QDL_PAD_EIM_DA2__GPIO3_IO02 0x1b0b1 |
| >; |
| }; |
| |
| pinctrl_enet: enetgrp { |
| fsl,pins = < |
| MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b030 |
| MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b030 |
| MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b030 |
| MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b030 |
| MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b030 |
| MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b030 |
| MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b030 |
| MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b030 |
| MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x4001a0b1 |
| MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b030 |
| MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b030 |
| MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b030 |
| MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b030 |
| MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b030 |
| MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0 |
| MX6QDL_PAD_CSI0_DATA_EN__GPIO5_IO20 0x1b058 |
| MX6QDL_PAD_ENET_TXD0__GPIO1_IO30 0x1b0b0 |
| >; |
| }; |
| |
| pinctrl_i2c1: i2c1grp { |
| fsl,pins = < |
| MX6QDL_PAD_CSI0_DAT8__I2C1_SDA 0x4001b8b1 |
| MX6QDL_PAD_CSI0_DAT9__I2C1_SCL 0x4001b8b1 |
| >; |
| }; |
| |
| pinctrl_i2c2: i2c2grp { |
| fsl,pins = < |
| MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 |
| MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 |
| >; |
| }; |
| |
| pinctrl_i2c3: i2c3grp { |
| fsl,pins = < |
| MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4000b070 |
| MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b870 |
| >; |
| }; |
| |
| pinctrl_irq_touch1: irqtouch1 { |
| fsl,pins = < |
| MX6QDL_PAD_GPIO_5__GPIO1_IO05 0x0b0b1 |
| >; |
| }; |
| |
| pinctrl_irq_touch2: irqtouch2 { |
| fsl,pins = < |
| MX6QDL_PAD_EIM_BCLK__GPIO6_IO31 0x0b0b1 |
| >; |
| }; |
| |
| pinctrl_lvds_bl: lvdsbacklightgrp { |
| fsl,pins = < |
| MX6QDL_PAD_GPIO_9__PWM1_OUT 0x0b0b1 |
| MX6QDL_PAD_NANDF_WP_B__GPIO6_IO09 0x0b0b1 |
| >; |
| }; |
| |
| pinctrl_lvds_reg: lvdsreggrp { |
| fsl,pins = < |
| MX6QDL_PAD_SD4_CLK__GPIO7_IO10 0x0b0b1 |
| >; |
| }; |
| |
| |
| pinctrl_nor_flash: norflashgrp { |
| fsl,pins = < |
| MX6QDL_PAD_NANDF_CS0__GPIO6_IO11 0x1b0b1 |
| MX6QDL_PAD_EIM_D21__ECSPI4_SCLK 0x100b1 |
| MX6QDL_PAD_EIM_D28__ECSPI4_MOSI 0x100b1 |
| MX6QDL_PAD_EIM_D22__ECSPI4_MISO 0x100b1 |
| MX6QDL_PAD_EIM_A25__GPIO5_IO02 0x100b1 |
| >; |
| }; |
| |
| pinctrl_pcie_ctrl: pciegrp { |
| fsl,pins = < |
| MX6QDL_PAD_EIM_A16__GPIO2_IO22 0x1b0b1 |
| MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x1b0b1 |
| >; |
| }; |
| |
| pinctrl_pmic: pmicgrp { |
| fsl,pins = < |
| MX6QDL_PAD_SD4_DAT0__GPIO2_IO08 0x0b0b1 |
| >; |
| }; |
| |
| pinctrl_pwm_fan: pwmfan { |
| fsl,pins = < |
| MX6QDL_PAD_SD4_DAT2__PWM4_OUT 0x0b0b1 |
| >; |
| }; |
| |
| pinctrl_rgb_bl: rgbbacklightgrp { |
| fsl,pins = < |
| MX6QDL_PAD_SD4_DAT1__PWM3_OUT 0x0b0b1 |
| MX6QDL_PAD_NANDF_ALE__GPIO6_IO08 0x0b0b1 |
| >; |
| }; |
| |
| pinctrl_rgb_bl_en: rgbenable { |
| fsl,pins = < |
| MX6QDL_PAD_SD4_CMD__GPIO7_IO09 0x0b0b1 |
| >; |
| }; |
| |
| pinctrl_rgb24_display: rgbgrp { |
| fsl,pins = < |
| MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x10 |
| MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15 0x10 |
| MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02 0x10 |
| MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03 0x10 |
| MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00 0x10 |
| MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01 0x10 |
| MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02 0x10 |
| MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03 0x10 |
| MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04 0x10 |
| MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05 0x10 |
| MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06 0x10 |
| MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07 0x10 |
| MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08 0x10 |
| MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09 0x10 |
| MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10 0x10 |
| MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11 0x10 |
| MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12 0x10 |
| MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13 0x10 |
| MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14 0x10 |
| MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15 0x10 |
| MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16 0x10 |
| MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17 0x10 |
| MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18 0x10 |
| MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19 0x10 |
| MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20 0x10 |
| MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21 0x10 |
| MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22 0x10 |
| MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23 0x10 |
| >; |
| }; |
| |
| pinctrl_secure: securegrp { |
| fsl,pins = < |
| MX6QDL_PAD_GPIO_18__GPIO7_IO13 0x1b0b1 |
| >; |
| }; |
| |
| pinctrl_som_leds: somledgrp { |
| fsl,pins = < |
| MX6QDL_PAD_EIM_DA0__GPIO3_IO00 0x0b0b1 |
| MX6QDL_PAD_EIM_DA1__GPIO3_IO01 0x0b0b1 |
| >; |
| }; |
| |
| pinctrl_spdif_in: spdifin { |
| fsl,pins = < |
| MX6QDL_PAD_GPIO_16__SPDIF_IN 0x1b0b0 |
| >; |
| }; |
| |
| pinctrl_spdif_out: spdifout { |
| fsl,pins = < |
| MX6QDL_PAD_GPIO_19__SPDIF_OUT 0x13091 |
| >; |
| }; |
| |
| pinctrl_uart1: uart1grp { |
| fsl,pins = < |
| MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0b1 |
| MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1 |
| >; |
| }; |
| |
| pinctrl_uart2: uart2grp { |
| fsl,pins = < |
| MX6QDL_PAD_SD4_DAT5__UART2_RTS_B 0x1b0b1 |
| MX6QDL_PAD_SD4_DAT6__UART2_CTS_B 0x1b0b1 |
| MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA 0x1b0b1 |
| MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA 0x1b0b1 |
| >; |
| }; |
| |
| pinctrl_uart3: uart3grp { |
| fsl,pins = < |
| MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1 |
| MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b1 |
| >; |
| }; |
| |
| pinctrl_uart4: uart4grp { |
| fsl,pins = < |
| MX6QDL_PAD_KEY_COL0__UART4_TX_DATA 0x1b0b1 |
| MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA 0x1b0b1 |
| >; |
| }; |
| |
| pinctrl_uart5: uart5grp { |
| fsl,pins = < |
| MX6QDL_PAD_KEY_COL1__UART5_TX_DATA 0x1b0b1 |
| MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA 0x1b0b1 |
| >; |
| }; |
| |
| pinctrl_usb_host1: usbhgrp { |
| fsl,pins = < |
| MX6QDL_PAD_EIM_D31__USB_H1_PWR 0x1B058 |
| MX6QDL_PAD_EIM_D30__USB_H1_OC 0x1B058 |
| >; |
| }; |
| |
| pinctrl_usb_otg: usbotggrp { |
| fsl,pins = < |
| MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID 0x17059 |
| MX6QDL_PAD_GPIO_7__GPIO1_IO07 0x17059 |
| MX6QDL_PAD_GPIO_8__GPIO1_IO08 0x17059 |
| >; |
| }; |
| |
| pinctrl_usdhc1: usdhc1grp { |
| fsl,pins = < |
| MX6QDL_PAD_SD1_CMD__SD1_CMD 0x17059 |
| MX6QDL_PAD_SD1_CLK__SD1_CLK 0x10059 |
| MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x17059 |
| MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x17059 |
| MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x17059 |
| MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x17059 |
| MX6QDL_PAD_GPIO_1__SD1_CD_B 0x1b0b1 |
| MX6QDL_PAD_DI0_PIN4__SD1_WP 0x1b0b1 |
| >; |
| }; |
| |
| pinctrl_usdhc2: usdhc2grp { |
| fsl,pins = < |
| MX6QDL_PAD_SD2_CMD__SD2_CMD 0x17059 |
| MX6QDL_PAD_SD2_CLK__SD2_CLK 0x10059 |
| MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059 |
| MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059 |
| MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059 |
| MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17059 |
| MX6QDL_PAD_GPIO_4__SD2_CD_B 0x1b0b1 |
| MX6QDL_PAD_GPIO_2__SD2_WP 0x1b0b1 |
| >; |
| }; |
| |
| pinctrl_usdhc3: usdhc3grp { |
| fsl,pins = < |
| MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059 |
| MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059 |
| MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059 |
| MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059 |
| MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059 |
| MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059 |
| MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x17059 |
| MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x17059 |
| MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x17059 |
| MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x17059 |
| MX6QDL_PAD_SD3_RST__SD3_RESET 0x1b0b1 |
| >; |
| }; |
| }; |
| |
| &ipu1_di0_disp0 { |
| remote-endpoint = <&rgb_encoder_in>; |
| }; |
| |
| &pcie { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_pcie_ctrl>; |
| reset-gpio = <&gpio7 12 GPIO_ACTIVE_LOW>; |
| disable-gpio = <&gpio2 22 GPIO_ACTIVE_LOW>; |
| }; |
| |
| &pwm1 { |
| status = "okay"; |
| }; |
| |
| &pwm3 { |
| status = "okay"; |
| }; |
| |
| &pwm4 { |
| status = "okay"; |
| }; |
| |
| &uart1 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_uart1>; |
| status = "okay"; |
| }; |
| |
| &uart2 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_uart2>; |
| }; |
| |
| &uart3 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_uart3>; |
| }; |
| |
| &uart4 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_uart4>; |
| }; |
| |
| &uart5 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_uart5>; |
| }; |
| |
| &usbh1 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_usb_host1>; |
| }; |
| |
| &usbotg { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_usb_otg>; |
| vbus-supply = <®_usb_otg>; |
| dr_mode = "peripheral"; |
| }; |
| |
| &usdhc1 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_usdhc1>; |
| fsl,wp-controller; |
| }; |
| |
| &usdhc2 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_usdhc2>; |
| fsl,wp-controller; |
| }; |
| |
| &usdhc3 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_usdhc3>; |
| non-removable; |
| bus-width = <8>; |
| status = "okay"; |
| }; |
| |
| /******device power Management*********/ |
| |
| &cpu0 { |
| voltage-tolerance = <2>; |
| }; |
| |
| ®_arm { |
| vin-supply = <&vddcore_reg>; |
| }; |
| |
| ®_soc { |
| vin-supply = <&vddsoc_reg>; |
| }; |
| |
| ®_pu { |
| vin-supply = <&vddsoc_reg>; |
| }; |
| |
| /*******Disabled HW following***********/ |
| |
| &snvs_rtc { |
| status = "disabled"; |
| }; |