| /* |
| * The code contained herein is licensed under the GNU General Public |
| * License. You may obtain a copy of the GNU General Public License |
| * Version 2 or later at the following locations: |
| */ |
| |
| /dts-v1/; |
| |
| #include <dt-bindings/clock/clps711x-clock.h> |
| |
| / { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| model = "Cirrus Logic EP7209"; |
| compatible = "cirrus,ep7209"; |
| |
| aliases { |
| gpio0 = &porta; |
| gpio1 = &portb; |
| gpio3 = &portd; |
| gpio4 = &porte; |
| serial0 = &uart1; |
| serial1 = &uart2; |
| spi0 = &spi; |
| timer0 = &timer1; |
| timer1 = &timer2; |
| }; |
| |
| cpus { |
| #address-cells = <0>; |
| #size-cells = <0>; |
| |
| cpu { |
| device_type = "cpu"; |
| compatible = "arm,arm720t"; |
| }; |
| }; |
| |
| soc { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| compatible = "simple-bus"; |
| interrupt-parent = <&intc>; |
| ranges; |
| |
| clks: clks@80000000 { |
| #clock-cells = <1>; |
| compatible = "cirrus,ep7209-clk"; |
| reg = <0x80000000 0xc000>; |
| startup-frequency = <73728000>; |
| }; |
| |
| intc: intc@80000000 { |
| compatible = "cirrus,ep7209-intc"; |
| reg = <0x80000000 0x4000>; |
| interrupt-controller; |
| #interrupt-cells = <1>; |
| }; |
| |
| porta: gpio@80000000 { |
| compatible = "cirrus,ep7209-gpio"; |
| reg = <0x80000000 0x1 0x80000040 0x1>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| }; |
| |
| portb: gpio@80000001 { |
| compatible = "cirrus,ep7209-gpio"; |
| reg = <0x80000001 0x1 0x80000041 0x1>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| }; |
| |
| portd: gpio@80000003 { |
| compatible = "cirrus,ep7209-gpio"; |
| reg = <0x80000003 0x1 0x80000043 0x1>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| }; |
| |
| porte: gpio@80000083 { |
| compatible = "cirrus,ep7209-gpio"; |
| reg = <0x80000083 0x1 0x800000c3 0x1>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| }; |
| |
| syscon1: syscon@80000100 { |
| compatible = "cirrus,ep7209-syscon1", "syscon"; |
| reg = <0x80000100 0x80>; |
| }; |
| |
| bus: bus@80000180 { |
| #address-cells = <2>; |
| #size-cells = <1>; |
| compatible = "cirrus,ep7209-bus", "simple-bus"; |
| clocks = <&clks CLPS711X_CLK_BUS>; |
| reg = <0x80000180 0x80>; |
| ranges = < |
| 0 0 0x00000000 0x10000000 |
| 1 0 0x10000000 0x10000000 |
| 2 0 0x20000000 0x10000000 |
| 3 0 0x30000000 0x10000000 |
| 4 0 0x40000000 0x10000000 |
| 5 0 0x50000000 0x10000000 |
| 6 0 0x60000000 0x0000c000 |
| 7 0 0x70000000 0x00000080 |
| >; |
| }; |
| |
| fb: fb@800002c0 { |
| compatible = "cirrus,ep7209-fb"; |
| reg = <0x800002c0 0xd44>, <0x60000000 0xc000>; |
| clocks = <&clks CLPS711X_CLK_BUS>; |
| status = "disabled"; |
| }; |
| |
| timer1: timer@80000300 { |
| compatible = "cirrus,ep7209-timer"; |
| reg = <0x80000300 0x4>; |
| clocks = <&clks CLPS711X_CLK_TIMER1>; |
| interrupts = <8>; |
| }; |
| |
| timer2: timer@80000340 { |
| compatible = "cirrus,ep7209-timer"; |
| reg = <0x80000340 0x4>; |
| clocks = <&clks CLPS711X_CLK_TIMER2>; |
| interrupts = <9>; |
| }; |
| |
| pwm: pwm@80000400 { |
| compatible = "cirrus,ep7209-pwm"; |
| reg = <0x80000400 0x4>; |
| clocks = <&clks CLPS711X_CLK_PWM>; |
| #pwm-cells = <1>; |
| }; |
| |
| uart1: uart@80000480 { |
| compatible = "cirrus,ep7209-uart"; |
| reg = <0x80000480 0x80>; |
| interrupts = <12 13>; |
| clocks = <&clks CLPS711X_CLK_UART>; |
| syscon = <&syscon1>; |
| }; |
| |
| spi: spi@80000500 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| compatible = "cirrus,ep7209-spi"; |
| reg = <0x80000500 0x4>; |
| interrupts = <15>; |
| clocks = <&clks CLPS711X_CLK_SPI>; |
| status = "disabled"; |
| }; |
| |
| syscon2: syscon@80001100 { |
| compatible = "cirrus,ep7209-syscon2", "syscon"; |
| reg = <0x80001100 0x80>; |
| }; |
| |
| uart2: uart@80001480 { |
| compatible = "cirrus,ep7209-uart"; |
| reg = <0x80001480 0x80>; |
| interrupts = <28 29>; |
| clocks = <&clks CLPS711X_CLK_UART>; |
| syscon = <&syscon2>; |
| }; |
| |
| dai: dai@80002000 { |
| #sound-dai-cells = <0>; |
| compatible = "cirrus,ep7209-dai"; |
| reg = <0x80002000 0x604>; |
| clocks = <&clks CLPS711X_CLK_PLL>; |
| clock-names = "pll"; |
| interrupts = <32>; |
| status = "disabled"; |
| }; |
| |
| syscon3: syscon@80002200 { |
| compatible = "cirrus,ep7209-syscon3", "syscon"; |
| reg = <0x80002200 0x40>; |
| }; |
| }; |
| |
| mctrl: mctrl { |
| compatible = "cirrus,ep7209-mctrl-gpio"; |
| gpio-controller; |
| #gpio-cells = <2>; |
| }; |
| }; |