| // SPDX-License-Identifier: GPL-2.0-or-later |
| /* |
| * altera.c |
| * |
| * altera FPGA driver |
| * |
| * Copyright (C) Altera Corporation 1998-2001 |
| * Copyright (C) 2010,2011 NetUP Inc. |
| * Copyright (C) 2010,2011 Igor M. Liplianin <liplianin@netup.ru> |
| */ |
| |
| #include <asm/unaligned.h> |
| #include <linux/ctype.h> |
| #include <linux/string.h> |
| #include <linux/firmware.h> |
| #include <linux/slab.h> |
| #include <linux/module.h> |
| #include <misc/altera.h> |
| #include "altera-exprt.h" |
| #include "altera-jtag.h" |
| |
| static int debug = 1; |
| module_param(debug, int, 0644); |
| MODULE_PARM_DESC(debug, "enable debugging information"); |
| |
| MODULE_DESCRIPTION("altera FPGA kernel module"); |
| MODULE_AUTHOR("Igor M. Liplianin <liplianin@netup.ru>"); |
| MODULE_LICENSE("GPL"); |
| |
| #define dprintk(args...) \ |
| if (debug) { \ |
| printk(KERN_DEBUG args); \ |
| } |
| |
| enum altera_fpga_opcode { |
| OP_NOP = 0, |
| OP_DUP, |
| OP_SWP, |
| OP_ADD, |
| OP_SUB, |
| OP_MULT, |
| OP_DIV, |
| OP_MOD, |
| OP_SHL, |
| OP_SHR, |
| OP_NOT, |
| OP_AND, |
| OP_OR, |
| OP_XOR, |
| OP_INV, |
| OP_GT, |
| OP_LT, |
| OP_RET, |
| OP_CMPS, |
| OP_PINT, |
| OP_PRNT, |
| OP_DSS, |
| OP_DSSC, |
| OP_ISS, |
| OP_ISSC, |
| OP_DPR = 0x1c, |
| OP_DPRL, |
| OP_DPO, |
| OP_DPOL, |
| OP_IPR, |
| OP_IPRL, |
| OP_IPO, |
| OP_IPOL, |
| OP_PCHR, |
| OP_EXIT, |
| OP_EQU, |
| OP_POPT, |
| OP_ABS = 0x2c, |
| OP_BCH0, |
| OP_PSH0 = 0x2f, |
| OP_PSHL = 0x40, |
| OP_PSHV, |
| OP_JMP, |
| OP_CALL, |
| OP_NEXT, |
| OP_PSTR, |
| OP_SINT = 0x47, |
| OP_ST, |
| OP_ISTP, |
| OP_DSTP, |
| OP_SWPN, |
| OP_DUPN, |
| OP_POPV, |
| OP_POPE, |
| OP_POPA, |
| OP_JMPZ, |
| OP_DS, |
| OP_IS, |
| OP_DPRA, |
| OP_DPOA, |
| OP_IPRA, |
| OP_IPOA, |
| OP_EXPT, |
| OP_PSHE, |
| OP_PSHA, |
| OP_DYNA, |
| OP_EXPV = 0x5c, |
| OP_COPY = 0x80, |
| OP_REVA, |
| OP_DSC, |
| OP_ISC, |
| OP_WAIT, |
| OP_VS, |
| OP_CMPA = 0xc0, |
| OP_VSC, |
| }; |
| |
| struct altera_procinfo { |
| char *name; |
| u8 attrs; |
| struct altera_procinfo *next; |
| }; |
| |
| /* This function checks if enough parameters are available on the stack. */ |
| static int altera_check_stack(int stack_ptr, int count, int *status) |
| { |
| if (stack_ptr < count) { |
| *status = -EOVERFLOW; |
| return 0; |
| } |
| |
| return 1; |
| } |
| |
| static void altera_export_int(char *key, s32 value) |
| { |
| dprintk("Export: key = \"%s\", value = %d\n", key, value); |
| } |
| |
| #define HEX_LINE_CHARS 72 |
| #define HEX_LINE_BITS (HEX_LINE_CHARS * 4) |
| |
| static void altera_export_bool_array(char *key, u8 *data, s32 count) |
| { |
| char string[HEX_LINE_CHARS + 1]; |
| s32 i, offset; |
| u32 size, line, lines, linebits, value, j, k; |
| |
| if (count > HEX_LINE_BITS) { |
| dprintk("Export: key = \"%s\", %d bits, value = HEX\n", |
| key, count); |
| lines = (count + (HEX_LINE_BITS - 1)) / HEX_LINE_BITS; |
| |
| for (line = 0; line < lines; ++line) { |
| if (line < (lines - 1)) { |
| linebits = HEX_LINE_BITS; |
| size = HEX_LINE_CHARS; |
| offset = count - ((line + 1) * HEX_LINE_BITS); |
| } else { |
| linebits = |
| count - ((lines - 1) * HEX_LINE_BITS); |
| size = (linebits + 3) / 4; |
| offset = 0L; |
| } |
| |
| string[size] = '\0'; |
| j = size - 1; |
| value = 0; |
| |
| for (k = 0; k < linebits; ++k) { |
| i = k + offset; |
| if (data[i >> 3] & (1 << (i & 7))) |
| value |= (1 << (i & 3)); |
| if ((i & 3) == 3) { |
| sprintf(&string[j], "%1x", value); |
| value = 0; |
| --j; |
| } |
| } |
| if ((k & 3) > 0) |
| sprintf(&string[j], "%1x", value); |
| |
| dprintk("%s\n", string); |
| } |
| |
| } else { |
| size = (count + 3) / 4; |
| string[size] = '\0'; |
| j = size - 1; |
| value = 0; |
| |
| for (i = 0; i < count; ++i) { |
| if (data[i >> 3] & (1 << (i & 7))) |
| value |= (1 << (i & 3)); |
| if ((i & 3) == 3) { |
| sprintf(&string[j], "%1x", value); |
| value = 0; |
| --j; |
| } |
| } |
| if ((i & 3) > 0) |
| sprintf(&string[j], "%1x", value); |
| |
| dprintk("Export: key = \"%s\", %d bits, value = HEX %s\n", |
| key, count, string); |
| } |
| } |
| |
| static int altera_execute(struct altera_state *astate, |
| u8 *p, |
| s32 program_size, |
| s32 *error_address, |
| int *exit_code, |
| int *format_version) |
| { |
| struct altera_config *aconf = astate->config; |
| char *msg_buff = astate->msg_buff; |
| long *stack = astate->stack; |
| int status = 0; |
| u32 first_word = 0L; |
| u32 action_table = 0L; |
| u32 proc_table = 0L; |
| u32 str_table = 0L; |
| u32 sym_table = 0L; |
| u32 data_sect = 0L; |
| u32 code_sect = 0L; |
| u32 debug_sect = 0L; |
| u32 action_count = 0L; |
| u32 proc_count = 0L; |
| u32 sym_count = 0L; |
| long *vars = NULL; |
| s32 *var_size = NULL; |
| char *attrs = NULL; |
| u8 *proc_attributes = NULL; |
| u32 pc; |
| u32 opcode_address; |
| u32 args[3]; |
| u32 opcode; |
| u32 name_id; |
| u8 charbuf[4]; |
| long long_tmp; |
| u32 variable_id; |
| u8 *charptr_tmp; |
| u8 *charptr_tmp2; |
| long *longptr_tmp; |
| int version = 0; |
| int delta = 0; |
| int stack_ptr = 0; |
| u32 arg_count; |
| int done = 0; |
| int bad_opcode = 0; |
| u32 count; |
| u32 index; |
| u32 index2; |
| s32 long_count; |
| s32 long_idx; |
| s32 long_idx2; |
| u32 i; |
| u32 j; |
| u32 uncomp_size; |
| u32 offset; |
| u32 value; |
| int current_proc = 0; |
| int reverse; |
| |
| char *name; |
| |
| dprintk("%s\n", __func__); |
| |
| /* Read header information */ |
| if (program_size > 52L) { |
| first_word = get_unaligned_be32(&p[0]); |
| version = (first_word & 1L); |
| *format_version = version + 1; |
| delta = version * 8; |
| |
| action_table = get_unaligned_be32(&p[4]); |
| proc_table = get_unaligned_be32(&p[8]); |
| str_table = get_unaligned_be32(&p[4 + delta]); |
| sym_table = get_unaligned_be32(&p[16 + delta]); |
| data_sect = get_unaligned_be32(&p[20 + delta]); |
| code_sect = get_unaligned_be32(&p[24 + delta]); |
| debug_sect = get_unaligned_be32(&p[28 + delta]); |
| action_count = get_unaligned_be32(&p[40 + delta]); |
| proc_count = get_unaligned_be32(&p[44 + delta]); |
| sym_count = get_unaligned_be32(&p[48 + (2 * delta)]); |
| } |
| |
| if ((first_word != 0x4A414D00L) && (first_word != 0x4A414D01L)) { |
| done = 1; |
| status = -EIO; |
| goto exit_done; |
| } |
| |
| if (sym_count <= 0) |
| goto exit_done; |
| |
| vars = kcalloc(sym_count, sizeof(long), GFP_KERNEL); |
| |
| if (vars == NULL) |
| status = -ENOMEM; |
| |
| if (status == 0) { |
| var_size = kcalloc(sym_count, sizeof(s32), GFP_KERNEL); |
| |
| if (var_size == NULL) |
| status = -ENOMEM; |
| } |
| |
| if (status == 0) { |
| attrs = kzalloc(sym_count, GFP_KERNEL); |
| |
| if (attrs == NULL) |
| status = -ENOMEM; |
| } |
| |
| if ((status == 0) && (version > 0)) { |
| proc_attributes = kzalloc(proc_count, GFP_KERNEL); |
| |
| if (proc_attributes == NULL) |
| status = -ENOMEM; |
| } |
| |
| if (status != 0) |
| goto exit_done; |
| |
| delta = version * 2; |
| |
| for (i = 0; i < sym_count; ++i) { |
| offset = (sym_table + ((11 + delta) * i)); |
| |
| value = get_unaligned_be32(&p[offset + 3 + delta]); |
| |
| attrs[i] = p[offset]; |
| |
| /* |
| * use bit 7 of attribute byte to indicate that |
| * this buffer was dynamically allocated |
| * and should be freed later |
| */ |
| attrs[i] &= 0x7f; |
| |
| var_size[i] = get_unaligned_be32(&p[offset + 7 + delta]); |
| |
| /* |
| * Attribute bits: |
| * bit 0: 0 = read-only, 1 = read-write |
| * bit 1: 0 = not compressed, 1 = compressed |
| * bit 2: 0 = not initialized, 1 = initialized |
| * bit 3: 0 = scalar, 1 = array |
| * bit 4: 0 = Boolean, 1 = integer |
| * bit 5: 0 = declared variable, |
| * 1 = compiler created temporary variable |
| */ |
| |
| if ((attrs[i] & 0x0c) == 0x04) |
| /* initialized scalar variable */ |
| vars[i] = value; |
| else if ((attrs[i] & 0x1e) == 0x0e) { |
| /* initialized compressed Boolean array */ |
| uncomp_size = get_unaligned_le32(&p[data_sect + value]); |
| |
| /* allocate a buffer for the uncompressed data */ |
| vars[i] = (long)kzalloc(uncomp_size, GFP_KERNEL); |
| if (vars[i] == 0L) |
| status = -ENOMEM; |
| else { |
| /* set flag so buffer will be freed later */ |
| attrs[i] |= 0x80; |
| |
| /* uncompress the data */ |
| if (altera_shrink(&p[data_sect + value], |
| var_size[i], |
| (u8 *)vars[i], |
| uncomp_size, |
| version) != uncomp_size) |
| /* decompression failed */ |
| status = -EIO; |
| else |
| var_size[i] = uncomp_size * 8L; |
| |
| } |
| } else if ((attrs[i] & 0x1e) == 0x0c) { |
| /* initialized Boolean array */ |
| vars[i] = value + data_sect + (long)p; |
| } else if ((attrs[i] & 0x1c) == 0x1c) { |
| /* initialized integer array */ |
| vars[i] = value + data_sect; |
| } else if ((attrs[i] & 0x0c) == 0x08) { |
| /* uninitialized array */ |
| |
| /* flag attrs so that memory is freed */ |
| attrs[i] |= 0x80; |
| |
| if (var_size[i] > 0) { |
| u32 size; |
| |
| if (attrs[i] & 0x10) |
| /* integer array */ |
| size = (var_size[i] * sizeof(s32)); |
| else |
| /* Boolean array */ |
| size = ((var_size[i] + 7L) / 8L); |
| |
| vars[i] = (long)kzalloc(size, GFP_KERNEL); |
| |
| if (vars[i] == 0) { |
| status = -ENOMEM; |
| } else { |
| /* zero out memory */ |
| for (j = 0; j < size; ++j) |
| ((u8 *)(vars[i]))[j] = 0; |
| |
| } |
| } else |
| vars[i] = 0; |
| |
| } else |
| vars[i] = 0; |
| |
| } |
| |
| exit_done: |
| if (status != 0) |
| done = 1; |
| |
| altera_jinit(astate); |
| |
| pc = code_sect; |
| msg_buff[0] = '\0'; |
| |
| /* |
| * For JBC version 2, we will execute the procedures corresponding to |
| * the selected ACTION |
| */ |
| if (version > 0) { |
| if (aconf->action == NULL) { |
| status = -EINVAL; |
| done = 1; |
| } else { |
| int action_found = 0; |
| for (i = 0; (i < action_count) && !action_found; ++i) { |
| name_id = get_unaligned_be32(&p[action_table + |
| (12 * i)]); |
| |
| name = &p[str_table + name_id]; |
| |
| if (strncasecmp(aconf->action, name, strlen(name)) == 0) { |
| action_found = 1; |
| current_proc = |
| get_unaligned_be32(&p[action_table + |
| (12 * i) + 8]); |
| } |
| } |
| |
| if (!action_found) { |
| status = -EINVAL; |
| done = 1; |
| } |
| } |
| |
| if (status == 0) { |
| int first_time = 1; |
| i = current_proc; |
| while ((i != 0) || first_time) { |
| first_time = 0; |
| /* check procedure attribute byte */ |
| proc_attributes[i] = |
| (p[proc_table + |
| (13 * i) + 8] & |
| 0x03); |
| |
| /* |
| * BIT0 - OPTIONAL |
| * BIT1 - RECOMMENDED |
| * BIT6 - FORCED OFF |
| * BIT7 - FORCED ON |
| */ |
| |
| i = get_unaligned_be32(&p[proc_table + |
| (13 * i) + 4]); |
| } |
| |
| /* |
| * Set current_proc to the first procedure |
| * to be executed |
| */ |
| i = current_proc; |
| while ((i != 0) && |
| ((proc_attributes[i] == 1) || |
| ((proc_attributes[i] & 0xc0) == 0x40))) { |
| i = get_unaligned_be32(&p[proc_table + |
| (13 * i) + 4]); |
| } |
| |
| if ((i != 0) || ((i == 0) && (current_proc == 0) && |
| ((proc_attributes[0] != 1) && |
| ((proc_attributes[0] & 0xc0) != 0x40)))) { |
| current_proc = i; |
| pc = code_sect + |
| get_unaligned_be32(&p[proc_table + |
| (13 * i) + 9]); |
| if ((pc < code_sect) || (pc >= debug_sect)) |
| status = -ERANGE; |
| } else |
| /* there are no procedures to execute! */ |
| done = 1; |
| |
| } |
| } |
| |
| msg_buff[0] = '\0'; |
| |
| while (!done) { |
| opcode = (p[pc] & 0xff); |
| opcode_address = pc; |
| ++pc; |
| |
| if (debug > 1) |
| printk("opcode: %02x\n", opcode); |
| |
| arg_count = (opcode >> 6) & 3; |
| for (i = 0; i < arg_count; ++i) { |
| args[i] = get_unaligned_be32(&p[pc]); |
| pc += 4; |
| } |
| |
| switch (opcode) { |
| case OP_NOP: |
| break; |
| case OP_DUP: |
| if (altera_check_stack(stack_ptr, 1, &status)) { |
| stack[stack_ptr] = stack[stack_ptr - 1]; |
| ++stack_ptr; |
| } |
| break; |
| case OP_SWP: |
| if (altera_check_stack(stack_ptr, 2, &status)) { |
| long_tmp = stack[stack_ptr - 2]; |
| stack[stack_ptr - 2] = stack[stack_ptr - 1]; |
| stack[stack_ptr - 1] = long_tmp; |
| } |
| break; |
| case OP_ADD: |
| if (altera_check_stack(stack_ptr, 2, &status)) { |
| --stack_ptr; |
| stack[stack_ptr - 1] += stack[stack_ptr]; |
| } |
| break; |
| case OP_SUB: |
| if (altera_check_stack(stack_ptr, 2, &status)) { |
| --stack_ptr; |
| stack[stack_ptr - 1] -= stack[stack_ptr]; |
| } |
| break; |
| case OP_MULT: |
| if (altera_check_stack(stack_ptr, 2, &status)) { |
| --stack_ptr; |
| stack[stack_ptr - 1] *= stack[stack_ptr]; |
| } |
| break; |
| case OP_DIV: |
| if (altera_check_stack(stack_ptr, 2, &status)) { |
| --stack_ptr; |
| stack[stack_ptr - 1] /= stack[stack_ptr]; |
| } |
| break; |
| case OP_MOD: |
| if (altera_check_stack(stack_ptr, 2, &status)) { |
| --stack_ptr; |
| stack[stack_ptr - 1] %= stack[stack_ptr]; |
| } |
| break; |
| case OP_SHL: |
| if (altera_check_stack(stack_ptr, 2, &status)) { |
| --stack_ptr; |
| stack[stack_ptr - 1] <<= stack[stack_ptr]; |
| } |
| break; |
| case OP_SHR: |
| if (altera_check_stack(stack_ptr, 2, &status)) { |
| --stack_ptr; |
| stack[stack_ptr - 1] >>= stack[stack_ptr]; |
| } |
| break; |
| case OP_NOT: |
| if (altera_check_stack(stack_ptr, 1, &status)) |
| stack[stack_ptr - 1] ^= (-1L); |
| |
| break; |
| case OP_AND: |
| if (altera_check_stack(stack_ptr, 2, &status)) { |
| --stack_ptr; |
| stack[stack_ptr - 1] &= stack[stack_ptr]; |
| } |
| break; |
| case OP_OR: |
| if (altera_check_stack(stack_ptr, 2, &status)) { |
| --stack_ptr; |
| stack[stack_ptr - 1] |= stack[stack_ptr]; |
| } |
| break; |
| case OP_XOR: |
| if (altera_check_stack(stack_ptr, 2, &status)) { |
| --stack_ptr; |
| stack[stack_ptr - 1] ^= stack[stack_ptr]; |
| } |
| break; |
| case OP_INV: |
| if (!altera_check_stack(stack_ptr, 1, &status)) |
| break; |
| stack[stack_ptr - 1] = stack[stack_ptr - 1] ? 0L : 1L; |
| break; |
| case OP_GT: |
| if (!altera_check_stack(stack_ptr, 2, &status)) |
| break; |
| --stack_ptr; |
| stack[stack_ptr - 1] = |
| (stack[stack_ptr - 1] > stack[stack_ptr]) ? |
| 1L : 0L; |
| |
| break; |
| case OP_LT: |
| if (!altera_check_stack(stack_ptr, 2, &status)) |
| break; |
| --stack_ptr; |
| stack[stack_ptr - 1] = |
| (stack[stack_ptr - 1] < stack[stack_ptr]) ? |
| 1L : 0L; |
| |
| break; |
| case OP_RET: |
| if ((version > 0) && (stack_ptr == 0)) { |
| /* |
| * We completed one of the main procedures |
| * of an ACTION. |
| * Find the next procedure |
| * to be executed and jump to it. |
| * If there are no more procedures, then EXIT. |
| */ |
| i = get_unaligned_be32(&p[proc_table + |
| (13 * current_proc) + 4]); |
| while ((i != 0) && |
| ((proc_attributes[i] == 1) || |
| ((proc_attributes[i] & 0xc0) == 0x40))) |
| i = get_unaligned_be32(&p[proc_table + |
| (13 * i) + 4]); |
| |
| if (i == 0) { |
| /* no procedures to execute! */ |
| done = 1; |
| *exit_code = 0; /* success */ |
| } else { |
| current_proc = i; |
| pc = code_sect + get_unaligned_be32( |
| &p[proc_table + |
| (13 * i) + 9]); |
| if ((pc < code_sect) || |
| (pc >= debug_sect)) |
| status = -ERANGE; |
| } |
| |
| } else |
| if (altera_check_stack(stack_ptr, 1, &status)) { |
| pc = stack[--stack_ptr] + code_sect; |
| if ((pc <= code_sect) || |
| (pc >= debug_sect)) |
| status = -ERANGE; |
| |
| } |
| |
| break; |
| case OP_CMPS: |
| /* |
| * Array short compare |
| * ...stack 0 is source 1 value |
| * ...stack 1 is source 2 value |
| * ...stack 2 is mask value |
| * ...stack 3 is count |
| */ |
| if (altera_check_stack(stack_ptr, 4, &status)) { |
| s32 a = stack[--stack_ptr]; |
| s32 b = stack[--stack_ptr]; |
| long_tmp = stack[--stack_ptr]; |
| count = stack[stack_ptr - 1]; |
| |
| if ((count < 1) || (count > 32)) |
| status = -ERANGE; |
| else { |
| long_tmp &= ((-1L) >> (32 - count)); |
| |
| stack[stack_ptr - 1] = |
| ((a & long_tmp) == (b & long_tmp)) |
| ? 1L : 0L; |
| } |
| } |
| break; |
| case OP_PINT: |
| /* |
| * PRINT add integer |
| * ...stack 0 is integer value |
| */ |
| if (!altera_check_stack(stack_ptr, 1, &status)) |
| break; |
| sprintf(&msg_buff[strlen(msg_buff)], |
| "%ld", stack[--stack_ptr]); |
| break; |
| case OP_PRNT: |
| /* PRINT finish */ |
| if (debug) |
| printk(msg_buff, "\n"); |
| |
| msg_buff[0] = '\0'; |
| break; |
| case OP_DSS: |
| /* |
| * DRSCAN short |
| * ...stack 0 is scan data |
| * ...stack 1 is count |
| */ |
| if (!altera_check_stack(stack_ptr, 2, &status)) |
| break; |
| long_tmp = stack[--stack_ptr]; |
| count = stack[--stack_ptr]; |
| put_unaligned_le32(long_tmp, &charbuf[0]); |
| status = altera_drscan(astate, count, charbuf, 0); |
| break; |
| case OP_DSSC: |
| /* |
| * DRSCAN short with capture |
| * ...stack 0 is scan data |
| * ...stack 1 is count |
| */ |
| if (!altera_check_stack(stack_ptr, 2, &status)) |
| break; |
| long_tmp = stack[--stack_ptr]; |
| count = stack[stack_ptr - 1]; |
| put_unaligned_le32(long_tmp, &charbuf[0]); |
| status = altera_swap_dr(astate, count, charbuf, |
| 0, charbuf, 0); |
| stack[stack_ptr - 1] = get_unaligned_le32(&charbuf[0]); |
| break; |
| case OP_ISS: |
| /* |
| * IRSCAN short |
| * ...stack 0 is scan data |
| * ...stack 1 is count |
| */ |
| if (!altera_check_stack(stack_ptr, 2, &status)) |
| break; |
| long_tmp = stack[--stack_ptr]; |
| count = stack[--stack_ptr]; |
| put_unaligned_le32(long_tmp, &charbuf[0]); |
| status = altera_irscan(astate, count, charbuf, 0); |
| break; |
| case OP_ISSC: |
| /* |
| * IRSCAN short with capture |
| * ...stack 0 is scan data |
| * ...stack 1 is count |
| */ |
| if (!altera_check_stack(stack_ptr, 2, &status)) |
| break; |
| long_tmp = stack[--stack_ptr]; |
| count = stack[stack_ptr - 1]; |
| put_unaligned_le32(long_tmp, &charbuf[0]); |
| status = altera_swap_ir(astate, count, charbuf, |
| 0, charbuf, 0); |
| stack[stack_ptr - 1] = get_unaligned_le32(&charbuf[0]); |
| break; |
| case OP_DPR: |
| if (!altera_check_stack(stack_ptr, 1, &status)) |
| break; |
| count = stack[--stack_ptr]; |
| status = altera_set_dr_pre(&astate->js, count, 0, NULL); |
| break; |
| case OP_DPRL: |
| /* |
| * DRPRE with literal data |
| * ...stack 0 is count |
| * ...stack 1 is literal data |
| */ |
| if (!altera_check_stack(stack_ptr, 2, &status)) |
| break; |
| count = stack[--stack_ptr]; |
| long_tmp = stack[--stack_ptr]; |
| put_unaligned_le32(long_tmp, &charbuf[0]); |
| status = altera_set_dr_pre(&astate->js, count, 0, |
| charbuf); |
| break; |
| case OP_DPO: |
| /* |
| * DRPOST |
| * ...stack 0 is count |
| */ |
| if (altera_check_stack(stack_ptr, 1, &status)) { |
| count = stack[--stack_ptr]; |
| status = altera_set_dr_post(&astate->js, count, |
| 0, NULL); |
| } |
| break; |
| case OP_DPOL: |
| /* |
| * DRPOST with literal data |
| * ...stack 0 is count |
| * ...stack 1 is literal data |
| */ |
| if (!altera_check_stack(stack_ptr, 2, &status)) |
| break; |
| count = stack[--stack_ptr]; |
| long_tmp = stack[--stack_ptr]; |
| put_unaligned_le32(long_tmp, &charbuf[0]); |
| status = altera_set_dr_post(&astate->js, count, 0, |
| charbuf); |
| break; |
| case OP_IPR: |
| if (altera_check_stack(stack_ptr, 1, &status)) { |
| count = stack[--stack_ptr]; |
| status = altera_set_ir_pre(&astate->js, count, |
| 0, NULL); |
| } |
| break; |
| case OP_IPRL: |
| /* |
| * IRPRE with literal data |
| * ...stack 0 is count |
| * ...stack 1 is literal data |
| */ |
| if (altera_check_stack(stack_ptr, 2, &status)) { |
| count = stack[--stack_ptr]; |
| long_tmp = stack[--stack_ptr]; |
| put_unaligned_le32(long_tmp, &charbuf[0]); |
| status = altera_set_ir_pre(&astate->js, count, |
| 0, charbuf); |
| } |
| break; |
| case OP_IPO: |
| /* |
| * IRPOST |
| * ...stack 0 is count |
| */ |
| if (altera_check_stack(stack_ptr, 1, &status)) { |
| count = stack[--stack_ptr]; |
| status = altera_set_ir_post(&astate->js, count, |
| 0, NULL); |
| } |
| break; |
| case OP_IPOL: |
| /* |
| * IRPOST with literal data |
| * ...stack 0 is count |
| * ...stack 1 is literal data |
| */ |
| if (!altera_check_stack(stack_ptr, 2, &status)) |
| break; |
| count = stack[--stack_ptr]; |
| long_tmp = stack[--stack_ptr]; |
| put_unaligned_le32(long_tmp, &charbuf[0]); |
| status = altera_set_ir_post(&astate->js, count, 0, |
| charbuf); |
| break; |
| case OP_PCHR: |
| if (altera_check_stack(stack_ptr, 1, &status)) { |
| u8 ch; |
| count = strlen(msg_buff); |
| ch = (char) stack[--stack_ptr]; |
| if ((ch < 1) || (ch > 127)) { |
| /* |
| * character code out of range |
| * instead of flagging an error, |
| * force the value to 127 |
| */ |
| ch = 127; |
| } |
| msg_buff[count] = ch; |
| msg_buff[count + 1] = '\0'; |
| } |
| break; |
| case OP_EXIT: |
| if (altera_check_stack(stack_ptr, 1, &status)) |
| *exit_code = stack[--stack_ptr]; |
| |
| done = 1; |
| break; |
| case OP_EQU: |
| if (!altera_check_stack(stack_ptr, 2, &status)) |
| break; |
| --stack_ptr; |
| stack[stack_ptr - 1] = |
| (stack[stack_ptr - 1] == stack[stack_ptr]) ? |
| 1L : 0L; |
| break; |
| case OP_POPT: |
| if (altera_check_stack(stack_ptr, 1, &status)) |
| --stack_ptr; |
| |
| break; |
| case OP_ABS: |
| if (!altera_check_stack(stack_ptr, 1, &status)) |
| break; |
| if (stack[stack_ptr - 1] < 0) |
| stack[stack_ptr - 1] = 0 - stack[stack_ptr - 1]; |
| |
| break; |
| case OP_BCH0: |
| /* |
| * Batch operation 0 |
| * SWP |
| * SWPN 7 |
| * SWP |
| * SWPN 6 |
| * DUPN 8 |
| * SWPN 2 |
| * SWP |
| * DUPN 6 |
| * DUPN 6 |
| */ |
| |
| /* SWP */ |
| if (altera_check_stack(stack_ptr, 2, &status)) { |
| long_tmp = stack[stack_ptr - 2]; |
| stack[stack_ptr - 2] = stack[stack_ptr - 1]; |
| stack[stack_ptr - 1] = long_tmp; |
| } |
| |
| /* SWPN 7 */ |
| index = 7 + 1; |
| if (altera_check_stack(stack_ptr, index, &status)) { |
| long_tmp = stack[stack_ptr - index]; |
| stack[stack_ptr - index] = stack[stack_ptr - 1]; |
| stack[stack_ptr - 1] = long_tmp; |
| } |
| |
| /* SWP */ |
| if (altera_check_stack(stack_ptr, 2, &status)) { |
| long_tmp = stack[stack_ptr - 2]; |
| stack[stack_ptr - 2] = stack[stack_ptr - 1]; |
| stack[stack_ptr - 1] = long_tmp; |
| } |
| |
| /* SWPN 6 */ |
| index = 6 + 1; |
| if (altera_check_stack(stack_ptr, index, &status)) { |
| long_tmp = stack[stack_ptr - index]; |
| stack[stack_ptr - index] = stack[stack_ptr - 1]; |
| stack[stack_ptr - 1] = long_tmp; |
| } |
| |
| /* DUPN 8 */ |
| index = 8 + 1; |
| if (altera_check_stack(stack_ptr, index, &status)) { |
| stack[stack_ptr] = stack[stack_ptr - index]; |
| ++stack_ptr; |
| } |
| |
| /* SWPN 2 */ |
| index = 2 + 1; |
| if (altera_check_stack(stack_ptr, index, &status)) { |
| long_tmp = stack[stack_ptr - index]; |
| stack[stack_ptr - index] = stack[stack_ptr - 1]; |
| stack[stack_ptr - 1] = long_tmp; |
| } |
| |
| /* SWP */ |
| if (altera_check_stack(stack_ptr, 2, &status)) { |
| long_tmp = stack[stack_ptr - 2]; |
| stack[stack_ptr - 2] = stack[stack_ptr - 1]; |
| stack[stack_ptr - 1] = long_tmp; |
| } |
| |
| /* DUPN 6 */ |
| index = 6 + 1; |
| if (altera_check_stack(stack_ptr, index, &status)) { |
| stack[stack_ptr] = stack[stack_ptr - index]; |
| ++stack_ptr; |
| } |
| |
| /* DUPN 6 */ |
| index = 6 + 1; |
| if (altera_check_stack(stack_ptr, index, &status)) { |
| stack[stack_ptr] = stack[stack_ptr - index]; |
| ++stack_ptr; |
| } |
| break; |
| case OP_PSH0: |
| stack[stack_ptr++] = 0; |
| break; |
| case OP_PSHL: |
| stack[stack_ptr++] = (s32) args[0]; |
| break; |
| case OP_PSHV: |
| stack[stack_ptr++] = vars[args[0]]; |
| break; |
| case OP_JMP: |
| pc = args[0] + code_sect; |
| if ((pc < code_sect) || (pc >= debug_sect)) |
| status = -ERANGE; |
| break; |
| case OP_CALL: |
| stack[stack_ptr++] = pc; |
| pc = args[0] + code_sect; |
| if ((pc < code_sect) || (pc >= debug_sect)) |
| status = -ERANGE; |
| break; |
| case OP_NEXT: |
| /* |
| * Process FOR / NEXT loop |
| * ...argument 0 is variable ID |
| * ...stack 0 is step value |
| * ...stack 1 is end value |
| * ...stack 2 is top address |
| */ |
| if (altera_check_stack(stack_ptr, 3, &status)) { |
| s32 step = stack[stack_ptr - 1]; |
| s32 end = stack[stack_ptr - 2]; |
| s32 top = stack[stack_ptr - 3]; |
| s32 iterator = vars[args[0]]; |
| int break_out = 0; |
| |
| if (step < 0) { |
| if (iterator <= end) |
| break_out = 1; |
| } else if (iterator >= end) |
| break_out = 1; |
| |
| if (break_out) { |
| stack_ptr -= 3; |
| } else { |
| vars[args[0]] = iterator + step; |
| pc = top + code_sect; |
| if ((pc < code_sect) || |
| (pc >= debug_sect)) |
| status = -ERANGE; |
| } |
| } |
| break; |
| case OP_PSTR: |
| /* |
| * PRINT add string |
| * ...argument 0 is string ID |
| */ |
| count = strlen(msg_buff); |
| strlcpy(&msg_buff[count], |
| &p[str_table + args[0]], |
| ALTERA_MESSAGE_LENGTH - count); |
| break; |
| case OP_SINT: |
| /* |
| * STATE intermediate state |
| * ...argument 0 is state code |
| */ |
| status = altera_goto_jstate(astate, args[0]); |
| break; |
| case OP_ST: |
| /* |
| * STATE final state |
| * ...argument 0 is state code |
| */ |
| status = altera_goto_jstate(astate, args[0]); |
| break; |
| case OP_ISTP: |
| /* |
| * IRSTOP state |
| * ...argument 0 is state code |
| */ |
| status = altera_set_irstop(&astate->js, args[0]); |
| break; |
| case OP_DSTP: |
| /* |
| * DRSTOP state |
| * ...argument 0 is state code |
| */ |
| status = altera_set_drstop(&astate->js, args[0]); |
| break; |
| |
| case OP_SWPN: |
| /* |
| * Exchange top with Nth stack value |
| * ...argument 0 is 0-based stack entry |
| * to swap with top element |
| */ |
| index = (args[0]) + 1; |
| if (altera_check_stack(stack_ptr, index, &status)) { |
| long_tmp = stack[stack_ptr - index]; |
| stack[stack_ptr - index] = stack[stack_ptr - 1]; |
| stack[stack_ptr - 1] = long_tmp; |
| } |
| break; |
| case OP_DUPN: |
| /* |
| * Duplicate Nth stack value |
| * ...argument 0 is 0-based stack entry to duplicate |
| */ |
| index = (args[0]) + 1; |
| if (altera_check_stack(stack_ptr, index, &status)) { |
| stack[stack_ptr] = stack[stack_ptr - index]; |
| ++stack_ptr; |
| } |
| break; |
| case OP_POPV: |
| /* |
| * Pop stack into scalar variable |
| * ...argument 0 is variable ID |
| * ...stack 0 is value |
| */ |
| if (altera_check_stack(stack_ptr, 1, &status)) |
| vars[args[0]] = stack[--stack_ptr]; |
| |
| break; |
| case OP_POPE: |
| /* |
| * Pop stack into integer array element |
| * ...argument 0 is variable ID |
| * ...stack 0 is array index |
| * ...stack 1 is value |
| */ |
| if (!altera_check_stack(stack_ptr, 2, &status)) |
| break; |
| variable_id = args[0]; |
| |
| /* |
| * If variable is read-only, |
| * convert to writable array |
| */ |
| if ((version > 0) && |
| ((attrs[variable_id] & 0x9c) == 0x1c)) { |
| /* Allocate a writable buffer for this array */ |
| count = var_size[variable_id]; |
| long_tmp = vars[variable_id]; |
| longptr_tmp = kcalloc(count, sizeof(long), |
| GFP_KERNEL); |
| vars[variable_id] = (long)longptr_tmp; |
| |
| if (vars[variable_id] == 0) { |
| status = -ENOMEM; |
| break; |
| } |
| |
| /* copy previous contents into buffer */ |
| for (i = 0; i < count; ++i) { |
| longptr_tmp[i] = |
| get_unaligned_be32(&p[long_tmp]); |
| long_tmp += sizeof(long); |
| } |
| |
| /* |
| * set bit 7 - buffer was |
| * dynamically allocated |
| */ |
| attrs[variable_id] |= 0x80; |
| |
| /* clear bit 2 - variable is writable */ |
| attrs[variable_id] &= ~0x04; |
| attrs[variable_id] |= 0x01; |
| |
| } |
| |
| /* check that variable is a writable integer array */ |
| if ((attrs[variable_id] & 0x1c) != 0x18) |
| status = -ERANGE; |
| else { |
| longptr_tmp = (long *)vars[variable_id]; |
| |
| /* pop the array index */ |
| index = stack[--stack_ptr]; |
| |
| /* pop the value and store it into the array */ |
| longptr_tmp[index] = stack[--stack_ptr]; |
| } |
| |
| break; |
| case OP_POPA: |
| /* |
| * Pop stack into Boolean array |
| * ...argument 0 is variable ID |
| * ...stack 0 is count |
| * ...stack 1 is array index |
| * ...stack 2 is value |
| */ |
| if (!altera_check_stack(stack_ptr, 3, &status)) |
| break; |
| variable_id = args[0]; |
| |
| /* |
| * If variable is read-only, |
| * convert to writable array |
| */ |
| if ((version > 0) && |
| ((attrs[variable_id] & 0x9c) == 0x0c)) { |
| /* Allocate a writable buffer for this array */ |
| long_tmp = |
| (var_size[variable_id] + 7L) >> 3L; |
| charptr_tmp2 = (u8 *)vars[variable_id]; |
| charptr_tmp = |
| kzalloc(long_tmp, GFP_KERNEL); |
| vars[variable_id] = (long)charptr_tmp; |
| |
| if (vars[variable_id] == 0) { |
| status = -ENOMEM; |
| break; |
| } |
| |
| /* zero the buffer */ |
| for (long_idx = 0L; |
| long_idx < long_tmp; |
| ++long_idx) { |
| charptr_tmp[long_idx] = 0; |
| } |
| |
| /* copy previous contents into buffer */ |
| for (long_idx = 0L; |
| long_idx < var_size[variable_id]; |
| ++long_idx) { |
| long_idx2 = long_idx; |
| |
| if (charptr_tmp2[long_idx2 >> 3] & |
| (1 << (long_idx2 & 7))) { |
| charptr_tmp[long_idx >> 3] |= |
| (1 << (long_idx & 7)); |
| } |
| } |
| |
| /* |
| * set bit 7 - buffer was |
| * dynamically allocated |
| */ |
| attrs[variable_id] |= 0x80; |
| |
| /* clear bit 2 - variable is writable */ |
| attrs[variable_id] &= ~0x04; |
| attrs[variable_id] |= 0x01; |
| |
| } |
| |
| /* |
| * check that variable is |
| * a writable Boolean array |
| */ |
| if ((attrs[variable_id] & 0x1c) != 0x08) { |
| status = -ERANGE; |
| break; |
| } |
| |
| charptr_tmp = (u8 *)vars[variable_id]; |
| |
| /* pop the count (number of bits to copy) */ |
| long_count = stack[--stack_ptr]; |
| |
| /* pop the array index */ |
| long_idx = stack[--stack_ptr]; |
| |
| reverse = 0; |
| |
| if (version > 0) { |
| /* |
| * stack 0 = array right index |
| * stack 1 = array left index |
| */ |
| |
| if (long_idx > long_count) { |
| reverse = 1; |
| long_tmp = long_count; |
| long_count = 1 + long_idx - |
| long_count; |
| long_idx = long_tmp; |
| |
| /* reverse POPA is not supported */ |
| status = -ERANGE; |
| break; |
| } else |
| long_count = 1 + long_count - |
| long_idx; |
| |
| } |
| |
| /* pop the data */ |
| long_tmp = stack[--stack_ptr]; |
| |
| if (long_count < 1) { |
| status = -ERANGE; |
| break; |
| } |
| |
| for (i = 0; i < long_count; ++i) { |
| if (long_tmp & (1L << (s32) i)) |
| charptr_tmp[long_idx >> 3L] |= |
| (1L << (long_idx & 7L)); |
| else |
| charptr_tmp[long_idx >> 3L] &= |
| ~(1L << (long_idx & 7L)); |
| |
| ++long_idx; |
| } |
| |
| break; |
| case OP_JMPZ: |
| /* |
| * Pop stack and branch if zero |
| * ...argument 0 is address |
| * ...stack 0 is condition value |
| */ |
| if (altera_check_stack(stack_ptr, 1, &status)) { |
| if (stack[--stack_ptr] == 0) { |
| pc = args[0] + code_sect; |
| if ((pc < code_sect) || |
| (pc >= debug_sect)) |
| status = -ERANGE; |
| } |
| } |
| break; |
| case OP_DS: |
| case OP_IS: |
| /* |
| * DRSCAN |
| * IRSCAN |
| * ...argument 0 is scan data variable ID |
| * ...stack 0 is array index |
| * ...stack 1 is count |
| */ |
| if (!altera_check_stack(stack_ptr, 2, &status)) |
| break; |
| long_idx = stack[--stack_ptr]; |
| long_count = stack[--stack_ptr]; |
| reverse = 0; |
| if (version > 0) { |
| /* |
| * stack 0 = array right index |
| * stack 1 = array left index |
| * stack 2 = count |
| */ |
| long_tmp = long_count; |
| long_count = stack[--stack_ptr]; |
| |
| if (long_idx > long_tmp) { |
| reverse = 1; |
| long_idx = long_tmp; |
| } |
| } |
| |
| charptr_tmp = (u8 *)vars[args[0]]; |
| |
| if (reverse) { |
| /* |
| * allocate a buffer |
| * and reverse the data order |
| */ |
| charptr_tmp2 = charptr_tmp; |
| charptr_tmp = kzalloc((long_count >> 3) + 1, |
| GFP_KERNEL); |
| if (charptr_tmp == NULL) { |
| status = -ENOMEM; |
| break; |
| } |
| |
| long_tmp = long_idx + long_count - 1; |
| long_idx2 = 0; |
| while (long_idx2 < long_count) { |
| if (charptr_tmp2[long_tmp >> 3] & |
| (1 << (long_tmp & 7))) |
| charptr_tmp[long_idx2 >> 3] |= |
| (1 << (long_idx2 & 7)); |
| else |
| charptr_tmp[long_idx2 >> 3] &= |
| ~(1 << (long_idx2 & 7)); |
| |
| --long_tmp; |
| ++long_idx2; |
| } |
| } |
| |
| if (opcode == 0x51) /* DS */ |
| status = altera_drscan(astate, long_count, |
| charptr_tmp, long_idx); |
| else /* IS */ |
| status = altera_irscan(astate, long_count, |
| charptr_tmp, long_idx); |
| |
| if (reverse) |
| kfree(charptr_tmp); |
| |
| break; |
| case OP_DPRA: |
| /* |
| * DRPRE with array data |
| * ...argument 0 is variable ID |
| * ...stack 0 is array index |
| * ...stack 1 is count |
| */ |
| if (!altera_check_stack(stack_ptr, 2, &status)) |
| break; |
| index = stack[--stack_ptr]; |
| count = stack[--stack_ptr]; |
| |
| if (version > 0) |
| /* |
| * stack 0 = array right index |
| * stack 1 = array left index |
| */ |
| count = 1 + count - index; |
| |
| charptr_tmp = (u8 *)vars[args[0]]; |
| status = altera_set_dr_pre(&astate->js, count, index, |
| charptr_tmp); |
| break; |
| case OP_DPOA: |
| /* |
| * DRPOST with array data |
| * ...argument 0 is variable ID |
| * ...stack 0 is array index |
| * ...stack 1 is count |
| */ |
| if (!altera_check_stack(stack_ptr, 2, &status)) |
| break; |
| index = stack[--stack_ptr]; |
| count = stack[--stack_ptr]; |
| |
| if (version > 0) |
| /* |
| * stack 0 = array right index |
| * stack 1 = array left index |
| */ |
| count = 1 + count - index; |
| |
| charptr_tmp = (u8 *)vars[args[0]]; |
| status = altera_set_dr_post(&astate->js, count, index, |
| charptr_tmp); |
| break; |
| case OP_IPRA: |
| /* |
| * IRPRE with array data |
| * ...argument 0 is variable ID |
| * ...stack 0 is array index |
| * ...stack 1 is count |
| */ |
| if (!altera_check_stack(stack_ptr, 2, &status)) |
| break; |
| index = stack[--stack_ptr]; |
| count = stack[--stack_ptr]; |
| |
| if (version > 0) |
| /* |
| * stack 0 = array right index |
| * stack 1 = array left index |
| */ |
| count = 1 + count - index; |
| |
| charptr_tmp = (u8 *)vars[args[0]]; |
| status = altera_set_ir_pre(&astate->js, count, index, |
| charptr_tmp); |
| |
| break; |
| case OP_IPOA: |
| /* |
| * IRPOST with array data |
| * ...argument 0 is variable ID |
| * ...stack 0 is array index |
| * ...stack 1 is count |
| */ |
| if (!altera_check_stack(stack_ptr, 2, &status)) |
| break; |
| index = stack[--stack_ptr]; |
| count = stack[--stack_ptr]; |
| |
| if (version > 0) |
| /* |
| * stack 0 = array right index |
| * stack 1 = array left index |
| */ |
| count = 1 + count - index; |
| |
| charptr_tmp = (u8 *)vars[args[0]]; |
| status = altera_set_ir_post(&astate->js, count, index, |
| charptr_tmp); |
| |
| break; |
| case OP_EXPT: |
| /* |
| * EXPORT |
| * ...argument 0 is string ID |
| * ...stack 0 is integer expression |
| */ |
| if (altera_check_stack(stack_ptr, 1, &status)) { |
| name = &p[str_table + args[0]]; |
| long_tmp = stack[--stack_ptr]; |
| altera_export_int(name, long_tmp); |
| } |
| break; |
| case OP_PSHE: |
| /* |
| * Push integer array element |
| * ...argument 0 is variable ID |
| * ...stack 0 is array index |
| */ |
| if (!altera_check_stack(stack_ptr, 1, &status)) |
| break; |
| variable_id = args[0]; |
| index = stack[stack_ptr - 1]; |
| |
| /* check variable type */ |
| if ((attrs[variable_id] & 0x1f) == 0x19) { |
| /* writable integer array */ |
| longptr_tmp = (long *)vars[variable_id]; |
| stack[stack_ptr - 1] = longptr_tmp[index]; |
| } else if ((attrs[variable_id] & 0x1f) == 0x1c) { |
| /* read-only integer array */ |
| long_tmp = vars[variable_id] + |
| (index * sizeof(long)); |
| stack[stack_ptr - 1] = |
| get_unaligned_be32(&p[long_tmp]); |
| } else |
| status = -ERANGE; |
| |
| break; |
| case OP_PSHA: |
| /* |
| * Push Boolean array |
| * ...argument 0 is variable ID |
| * ...stack 0 is count |
| * ...stack 1 is array index |
| */ |
| if (!altera_check_stack(stack_ptr, 2, &status)) |
| break; |
| variable_id = args[0]; |
| |
| /* check that variable is a Boolean array */ |
| if ((attrs[variable_id] & 0x18) != 0x08) { |
| status = -ERANGE; |
| break; |
| } |
| |
| charptr_tmp = (u8 *)vars[variable_id]; |
| |
| /* pop the count (number of bits to copy) */ |
| count = stack[--stack_ptr]; |
| |
| /* pop the array index */ |
| index = stack[stack_ptr - 1]; |
| |
| if (version > 0) |
| /* |
| * stack 0 = array right index |
| * stack 1 = array left index |
| */ |
| count = 1 + count - index; |
| |
| if ((count < 1) || (count > 32)) { |
| status = -ERANGE; |
| break; |
| } |
| |
| long_tmp = 0L; |
| |
| for (i = 0; i < count; ++i) |
| if (charptr_tmp[(i + index) >> 3] & |
| (1 << ((i + index) & 7))) |
| long_tmp |= (1L << i); |
| |
| stack[stack_ptr - 1] = long_tmp; |
| |
| break; |
| case OP_DYNA: |
| /* |
| * Dynamically change size of array |
| * ...argument 0 is variable ID |
| * ...stack 0 is new size |
| */ |
| if (!altera_check_stack(stack_ptr, 1, &status)) |
| break; |
| variable_id = args[0]; |
| long_tmp = stack[--stack_ptr]; |
| |
| if (long_tmp > var_size[variable_id]) { |
| var_size[variable_id] = long_tmp; |
| |
| if (attrs[variable_id] & 0x10) |
| /* allocate integer array */ |
| long_tmp *= sizeof(long); |
| else |
| /* allocate Boolean array */ |
| long_tmp = (long_tmp + 7) >> 3; |
| |
| /* |
| * If the buffer was previously allocated, |
| * free it |
| */ |
| if (attrs[variable_id] & 0x80) { |
| kfree((void *)vars[variable_id]); |
| vars[variable_id] = 0; |
| } |
| |
| /* |
| * Allocate a new buffer |
| * of the requested size |
| */ |
| vars[variable_id] = (long) |
| kzalloc(long_tmp, GFP_KERNEL); |
| |
| if (vars[variable_id] == 0) { |
| status = -ENOMEM; |
| break; |
| } |
| |
| /* |
| * Set the attribute bit to indicate that |
| * this buffer was dynamically allocated and |
| * should be freed later |
| */ |
| attrs[variable_id] |= 0x80; |
| |
| /* zero out memory */ |
| count = ((var_size[variable_id] + 7L) / |
| 8L); |
| charptr_tmp = (u8 *)(vars[variable_id]); |
| for (index = 0; index < count; ++index) |
| charptr_tmp[index] = 0; |
| |
| } |
| |
| break; |
| case OP_EXPV: |
| /* |
| * Export Boolean array |
| * ...argument 0 is string ID |
| * ...stack 0 is variable ID |
| * ...stack 1 is array right index |
| * ...stack 2 is array left index |
| */ |
| if (!altera_check_stack(stack_ptr, 3, &status)) |
| break; |
| if (version == 0) { |
| /* EXPV is not supported in JBC 1.0 */ |
| bad_opcode = 1; |
| break; |
| } |
| name = &p[str_table + args[0]]; |
| variable_id = stack[--stack_ptr]; |
| long_idx = stack[--stack_ptr];/* right indx */ |
| long_idx2 = stack[--stack_ptr];/* left indx */ |
| |
| if (long_idx > long_idx2) { |
| /* reverse indices not supported */ |
| status = -ERANGE; |
| break; |
| } |
| |
| long_count = 1 + long_idx2 - long_idx; |
| |
| charptr_tmp = (u8 *)vars[variable_id]; |
| charptr_tmp2 = NULL; |
| |
| if ((long_idx & 7L) != 0) { |
| s32 k = long_idx; |
| charptr_tmp2 = |
| kzalloc(((long_count + 7L) / 8L), |
| GFP_KERNEL); |
| if (charptr_tmp2 == NULL) { |
| status = -ENOMEM; |
| break; |
| } |
| |
| for (i = 0; i < long_count; ++i) { |
| if (charptr_tmp[k >> 3] & |
| (1 << (k & 7))) |
| charptr_tmp2[i >> 3] |= |
| (1 << (i & 7)); |
| else |
| charptr_tmp2[i >> 3] &= |
| ~(1 << (i & 7)); |
| |
| ++k; |
| } |
| charptr_tmp = charptr_tmp2; |
| |
| } else if (long_idx != 0) |
| charptr_tmp = &charptr_tmp[long_idx >> 3]; |
| |
| altera_export_bool_array(name, charptr_tmp, |
| long_count); |
| |
| /* free allocated buffer */ |
| if ((long_idx & 7L) != 0) |
| kfree(charptr_tmp2); |
| |
| break; |
| case OP_COPY: { |
| /* |
| * Array copy |
| * ...argument 0 is dest ID |
| * ...argument 1 is source ID |
| * ...stack 0 is count |
| * ...stack 1 is dest index |
| * ...stack 2 is source index |
| */ |
| s32 copy_count; |
| s32 copy_index; |
| s32 copy_index2; |
| s32 destleft; |
| s32 src_count; |
| s32 dest_count; |
| int src_reverse = 0; |
| int dest_reverse = 0; |
| |
| if (!altera_check_stack(stack_ptr, 3, &status)) |
| break; |
| |
| copy_count = stack[--stack_ptr]; |
| copy_index = stack[--stack_ptr]; |
| copy_index2 = stack[--stack_ptr]; |
| reverse = 0; |
| |
| if (version > 0) { |
| /* |
| * stack 0 = source right index |
| * stack 1 = source left index |
| * stack 2 = destination right index |
| * stack 3 = destination left index |
| */ |
| destleft = stack[--stack_ptr]; |
| |
| if (copy_count > copy_index) { |
| src_reverse = 1; |
| reverse = 1; |
| src_count = 1 + copy_count - copy_index; |
| /* copy_index = source start index */ |
| } else { |
| src_count = 1 + copy_index - copy_count; |
| /* source start index */ |
| copy_index = copy_count; |
| } |
| |
| if (copy_index2 > destleft) { |
| dest_reverse = 1; |
| reverse = !reverse; |
| dest_count = 1 + copy_index2 - destleft; |
| /* destination start index */ |
| copy_index2 = destleft; |
| } else |
| dest_count = 1 + destleft - copy_index2; |
| |
| copy_count = (src_count < dest_count) ? |
| src_count : dest_count; |
| |
| if ((src_reverse || dest_reverse) && |
| (src_count != dest_count)) |
| /* |
| * If either the source or destination |
| * is reversed, we can't tolerate |
| * a length mismatch, because we |
| * "left justify" arrays when copying. |
| * This won't work correctly |
| * with reversed arrays. |
| */ |
| status = -ERANGE; |
| |
| } |
| |
| count = copy_count; |
| index = copy_index; |
| index2 = copy_index2; |
| |
| /* |
| * If destination is a read-only array, |
| * allocate a buffer and convert it to a writable array |
| */ |
| variable_id = args[1]; |
| if ((version > 0) && |
| ((attrs[variable_id] & 0x9c) == 0x0c)) { |
| /* Allocate a writable buffer for this array */ |
| long_tmp = |
| (var_size[variable_id] + 7L) >> 3L; |
| charptr_tmp2 = (u8 *)vars[variable_id]; |
| charptr_tmp = |
| kzalloc(long_tmp, GFP_KERNEL); |
| vars[variable_id] = (long)charptr_tmp; |
| |
| if (vars[variable_id] == 0) { |
| status = -ENOMEM; |
| break; |
| } |
| |
| /* zero the buffer */ |
| for (long_idx = 0L; long_idx < long_tmp; |
| ++long_idx) |
| charptr_tmp[long_idx] = 0; |
| |
| /* copy previous contents into buffer */ |
| for (long_idx = 0L; |
| long_idx < var_size[variable_id]; |
| ++long_idx) { |
| long_idx2 = long_idx; |
| |
| if (charptr_tmp2[long_idx2 >> 3] & |
| (1 << (long_idx2 & 7))) |
| charptr_tmp[long_idx >> 3] |= |
| (1 << (long_idx & 7)); |
| |
| } |
| |
| /* |
| set bit 7 - buffer was dynamically allocated */ |
| attrs[variable_id] |= 0x80; |
| |
| /* clear bit 2 - variable is writable */ |
| attrs[variable_id] &= ~0x04; |
| attrs[variable_id] |= 0x01; |
| } |
| |
| charptr_tmp = (u8 *)vars[args[1]]; |
| charptr_tmp2 = (u8 *)vars[args[0]]; |
| |
| /* check if destination is a writable Boolean array */ |
| if ((attrs[args[1]] & 0x1c) != 0x08) { |
| status = -ERANGE; |
| break; |
| } |
| |
| if (count < 1) { |
| status = -ERANGE; |
| break; |
| } |
| |
| if (reverse) |
| index2 += (count - 1); |
| |
| for (i = 0; i < count; ++i) { |
| if (charptr_tmp2[index >> 3] & |
| (1 << (index & 7))) |
| charptr_tmp[index2 >> 3] |= |
| (1 << (index2 & 7)); |
| else |
| charptr_tmp[index2 >> 3] &= |
| ~(1 << (index2 & 7)); |
| |
| ++index; |
| if (reverse) |
| --index2; |
| else |
| ++index2; |
| } |
| |
| break; |
| } |
| case OP_DSC: |
| case OP_ISC: { |
| /* |
| * DRSCAN with capture |
| * IRSCAN with capture |
| * ...argument 0 is scan data variable ID |
| * ...argument 1 is capture variable ID |
| * ...stack 0 is capture index |
| * ...stack 1 is scan data index |
| * ...stack 2 is count |
| */ |
| s32 scan_right, scan_left; |
| s32 capture_count = 0; |
| s32 scan_count = 0; |
| s32 capture_index; |
| s32 scan_index; |
| |
| if (!altera_check_stack(stack_ptr, 3, &status)) |
| break; |
| |
| capture_index = stack[--stack_ptr]; |
| scan_index = stack[--stack_ptr]; |
| |
| if (version > 0) { |
| /* |
| * stack 0 = capture right index |
| * stack 1 = capture left index |
| * stack 2 = scan right index |
| * stack 3 = scan left index |
| * stack 4 = count |
| */ |
| scan_right = stack[--stack_ptr]; |
| scan_left = stack[--stack_ptr]; |
| capture_count = 1 + scan_index - capture_index; |
| scan_count = 1 + scan_left - scan_right; |
| scan_index = scan_right; |
| } |
| |
| long_count = stack[--stack_ptr]; |
| /* |
| * If capture array is read-only, allocate a buffer |
| * and convert it to a writable array |
| */ |
| variable_id = args[1]; |
| if ((version > 0) && |
| ((attrs[variable_id] & 0x9c) == 0x0c)) { |
| /* Allocate a writable buffer for this array */ |
| long_tmp = |
| (var_size[variable_id] + 7L) >> 3L; |
| charptr_tmp2 = (u8 *)vars[variable_id]; |
| charptr_tmp = |
| kzalloc(long_tmp, GFP_KERNEL); |
| vars[variable_id] = (long)charptr_tmp; |
| |
| if (vars[variable_id] == 0) { |
| status = -ENOMEM; |
| break; |
| } |
| |
| /* zero the buffer */ |
| for (long_idx = 0L; long_idx < long_tmp; |
| ++long_idx) |
| charptr_tmp[long_idx] = 0; |
| |
| /* copy previous contents into buffer */ |
| for (long_idx = 0L; |
| long_idx < var_size[variable_id]; |
| ++long_idx) { |
| long_idx2 = long_idx; |
| |
| if (charptr_tmp2[long_idx2 >> 3] & |
| (1 << (long_idx2 & 7))) |
| charptr_tmp[long_idx >> 3] |= |
| (1 << (long_idx & 7)); |
| |
| } |
| |
| /* |
| * set bit 7 - buffer was |
| * dynamically allocated |
| */ |
| attrs[variable_id] |= 0x80; |
| |
| /* clear bit 2 - variable is writable */ |
| attrs[variable_id] &= ~0x04; |
| attrs[variable_id] |= 0x01; |
| |
| } |
| |
| charptr_tmp = (u8 *)vars[args[0]]; |
| charptr_tmp2 = (u8 *)vars[args[1]]; |
| |
| if ((version > 0) && |
| ((long_count > capture_count) || |
| (long_count > scan_count))) { |
| status = -ERANGE; |
| break; |
| } |
| |
| /* |
| * check that capture array |
| * is a writable Boolean array |
| */ |
| if ((attrs[args[1]] & 0x1c) != 0x08) { |
| status = -ERANGE; |
| break; |
| } |
| |
| if (status == 0) { |
| if (opcode == 0x82) /* DSC */ |
| status = altera_swap_dr(astate, |
| long_count, |
| charptr_tmp, |
| scan_index, |
| charptr_tmp2, |
| capture_index); |
| else /* ISC */ |
| status = altera_swap_ir(astate, |
| long_count, |
| charptr_tmp, |
| scan_index, |
| charptr_tmp2, |
| capture_index); |
| |
| } |
| |
| break; |
| } |
| case OP_WAIT: |
| /* |
| * WAIT |
| * ...argument 0 is wait state |
| * ...argument 1 is end state |
| * ...stack 0 is cycles |
| * ...stack 1 is microseconds |
| */ |
| if (!altera_check_stack(stack_ptr, 2, &status)) |
| break; |
| long_tmp = stack[--stack_ptr]; |
| |
| if (long_tmp != 0L) |
| status = altera_wait_cycles(astate, long_tmp, |
| args[0]); |
| |
| long_tmp = stack[--stack_ptr]; |
| |
| if ((status == 0) && (long_tmp != 0L)) |
| status = altera_wait_msecs(astate, |
| long_tmp, |
| args[0]); |
| |
| if ((status == 0) && (args[1] != args[0])) |
| status = altera_goto_jstate(astate, |
| args[1]); |
| |
| if (version > 0) { |
| --stack_ptr; /* throw away MAX cycles */ |
| --stack_ptr; /* throw away MAX microseconds */ |
| } |
| break; |
| case OP_CMPA: { |
| /* |
| * Array compare |
| * ...argument 0 is source 1 ID |
| * ...argument 1 is source 2 ID |
| * ...argument 2 is mask ID |
| * ...stack 0 is source 1 index |
| * ...stack 1 is source 2 index |
| * ...stack 2 is mask index |
| * ...stack 3 is count |
| */ |
| s32 a, b; |
| u8 *source1 = (u8 *)vars[args[0]]; |
| u8 *source2 = (u8 *)vars[args[1]]; |
| u8 *mask = (u8 *)vars[args[2]]; |
| u32 index1; |
| u32 index2; |
| u32 mask_index; |
| |
| if (!altera_check_stack(stack_ptr, 4, &status)) |
| break; |
| |
| index1 = stack[--stack_ptr]; |
| index2 = stack[--stack_ptr]; |
| mask_index = stack[--stack_ptr]; |
| long_count = stack[--stack_ptr]; |
| |
| if (version > 0) { |
| /* |
| * stack 0 = source 1 right index |
| * stack 1 = source 1 left index |
| * stack 2 = source 2 right index |
| * stack 3 = source 2 left index |
| * stack 4 = mask right index |
| * stack 5 = mask left index |
| */ |
| s32 mask_right = stack[--stack_ptr]; |
| s32 mask_left = stack[--stack_ptr]; |
| /* source 1 count */ |
| a = 1 + index2 - index1; |
| /* source 2 count */ |
| b = 1 + long_count - mask_index; |
| a = (a < b) ? a : b; |
| /* mask count */ |
| b = 1 + mask_left - mask_right; |
| a = (a < b) ? a : b; |
| /* source 2 start index */ |
| index2 = mask_index; |
| /* mask start index */ |
| mask_index = mask_right; |
| long_count = a; |
| } |
| |
| long_tmp = 1L; |
| |
| if (long_count < 1) |
| status = -ERANGE; |
| else { |
| count = long_count; |
| |
| for (i = 0; i < count; ++i) { |
| if (mask[mask_index >> 3] & |
| (1 << (mask_index & 7))) { |
| a = source1[index1 >> 3] & |
| (1 << (index1 & 7)) |
| ? 1 : 0; |
| b = source2[index2 >> 3] & |
| (1 << (index2 & 7)) |
| ? 1 : 0; |
| |
| if (a != b) /* failure */ |
| long_tmp = 0L; |
| } |
| ++index1; |
| ++index2; |
| ++mask_index; |
| } |
| } |
| |
| stack[stack_ptr++] = long_tmp; |
| |
| break; |
| } |
| default: |
| /* Unrecognized opcode -- ERROR! */ |
| bad_opcode = 1; |
| break; |
| } |
| |
| if (bad_opcode) |
| status = -ENOSYS; |
| |
| if ((stack_ptr < 0) || (stack_ptr >= ALTERA_STACK_SIZE)) |
| status = -EOVERFLOW; |
| |
| if (status != 0) { |
| done = 1; |
| *error_address = (s32)(opcode_address - code_sect); |
| } |
| } |
| |
| altera_free_buffers(astate); |
| |
| /* Free all dynamically allocated arrays */ |
| if ((attrs != NULL) && (vars != NULL)) |
| for (i = 0; i < sym_count; ++i) |
| if (attrs[i] & 0x80) |
| kfree((void *)vars[i]); |
| |
| kfree(vars); |
| kfree(var_size); |
| kfree(attrs); |
| kfree(proc_attributes); |
| |
| return status; |
| } |
| |
| static int altera_get_note(u8 *p, s32 program_size, |
| s32 *offset, char *key, char *value, int length) |
| /* |
| * Gets key and value of NOTE fields in the JBC file. |
| * Can be called in two modes: if offset pointer is NULL, |
| * then the function searches for note fields which match |
| * the key string provided. If offset is not NULL, then |
| * the function finds the next note field of any key, |
| * starting at the offset specified by the offset pointer. |
| * Returns 0 for success, else appropriate error code |
| */ |
| { |
| int status = -ENODATA; |
| u32 note_strings = 0L; |
| u32 note_table = 0L; |
| u32 note_count = 0L; |
| u32 first_word = 0L; |
| int version = 0; |
| int delta = 0; |
| char *key_ptr; |
| char *value_ptr; |
| int i; |
| |
| /* Read header information */ |
| if (program_size > 52L) { |
| first_word = get_unaligned_be32(&p[0]); |
| version = (first_word & 1L); |
| delta = version * 8; |
| |
| note_strings = get_unaligned_be32(&p[8 + delta]); |
| note_table = get_unaligned_be32(&p[12 + delta]); |
| note_count = get_unaligned_be32(&p[44 + (2 * delta)]); |
| } |
| |
| if ((first_word != 0x4A414D00L) && (first_word != 0x4A414D01L)) |
| return -EIO; |
| |
| if (note_count <= 0L) |
| return status; |
| |
| if (offset == NULL) { |
| /* |
| * We will search for the first note with a specific key, |
| * and return only the value |
| */ |
| for (i = 0; (i < note_count) && |
| (status != 0); ++i) { |
| key_ptr = &p[note_strings + |
| get_unaligned_be32( |
| &p[note_table + (8 * i)])]; |
| if (key && !strncasecmp(key, key_ptr, strlen(key_ptr))) { |
| status = 0; |
| |
| value_ptr = &p[note_strings + |
| get_unaligned_be32( |
| &p[note_table + (8 * i) + 4])]; |
| |
| if (value != NULL) |
| strlcpy(value, value_ptr, length); |
| |
| } |
| } |
| } else { |
| /* |
| * We will search for the next note, regardless of the key, |
| * and return both the value and the key |
| */ |
| |
| i = *offset; |
| |
| if ((i >= 0) && (i < note_count)) { |
| status = 0; |
| |
| if (key != NULL) |
| strlcpy(key, &p[note_strings + |
| get_unaligned_be32( |
| &p[note_table + (8 * i)])], |
| length); |
| |
| if (value != NULL) |
| strlcpy(value, &p[note_strings + |
| get_unaligned_be32( |
| &p[note_table + (8 * i) + 4])], |
| length); |
| |
| *offset = i + 1; |
| } |
| } |
| |
| return status; |
| } |
| |
| static int altera_check_crc(u8 *p, s32 program_size) |
| { |
| int status = 0; |
| u16 local_expected = 0, |
| local_actual = 0, |
| shift_reg = 0xffff; |
| int bit, feedback; |
| u8 databyte; |
| u32 i; |
| u32 crc_section = 0L; |
| u32 first_word = 0L; |
| int version = 0; |
| int delta = 0; |
| |
| if (program_size > 52L) { |
| first_word = get_unaligned_be32(&p[0]); |
| version = (first_word & 1L); |
| delta = version * 8; |
| |
| crc_section = get_unaligned_be32(&p[32 + delta]); |
| } |
| |
| if ((first_word != 0x4A414D00L) && (first_word != 0x4A414D01L)) |
| status = -EIO; |
| |
| if (crc_section >= program_size) |
| status = -EIO; |
| |
| if (status == 0) { |
| local_expected = (u16)get_unaligned_be16(&p[crc_section]); |
| |
| for (i = 0; i < crc_section; ++i) { |
| databyte = p[i]; |
| for (bit = 0; bit < 8; bit++) { |
| feedback = (databyte ^ shift_reg) & 0x01; |
| shift_reg >>= 1; |
| if (feedback) |
| shift_reg ^= 0x8408; |
| |
| databyte >>= 1; |
| } |
| } |
| |
| local_actual = (u16)~shift_reg; |
| |
| if (local_expected != local_actual) |
| status = -EILSEQ; |
| |
| } |
| |
| if (debug || status) { |
| switch (status) { |
| case 0: |
| printk(KERN_INFO "%s: CRC matched: %04x\n", __func__, |
| local_actual); |
| break; |
| case -EILSEQ: |
| printk(KERN_ERR "%s: CRC mismatch: expected %04x, " |
| "actual %04x\n", __func__, local_expected, |
| local_actual); |
| break; |
| case -ENODATA: |
| printk(KERN_ERR "%s: expected CRC not found, " |
| "actual CRC = %04x\n", __func__, |
| local_actual); |
| break; |
| case -EIO: |
| printk(KERN_ERR "%s: error: format isn't " |
| "recognized.\n", __func__); |
| break; |
| default: |
| printk(KERN_ERR "%s: CRC function returned error " |
| "code %d\n", __func__, status); |
| break; |
| } |
| } |
| |
| return status; |
| } |
| |
| static int altera_get_file_info(u8 *p, |
| s32 program_size, |
| int *format_version, |
| int *action_count, |
| int *procedure_count) |
| { |
| int status = -EIO; |
| u32 first_word = 0; |
| int version = 0; |
| |
| if (program_size <= 52L) |
| return status; |
| |
| first_word = get_unaligned_be32(&p[0]); |
| |
| if ((first_word == 0x4A414D00L) || (first_word == 0x4A414D01L)) { |
| status = 0; |
| |
| version = (first_word & 1L); |
| *format_version = version + 1; |
| |
| if (version > 0) { |
| *action_count = get_unaligned_be32(&p[48]); |
| *procedure_count = get_unaligned_be32(&p[52]); |
| } |
| } |
| |
| return status; |
| } |
| |
| static int altera_get_act_info(u8 *p, |
| s32 program_size, |
| int index, |
| char **name, |
| char **description, |
| struct altera_procinfo **proc_list) |
| { |
| int status = -EIO; |
| struct altera_procinfo *procptr = NULL; |
| struct altera_procinfo *tmpptr = NULL; |
| u32 first_word = 0L; |
| u32 action_table = 0L; |
| u32 proc_table = 0L; |
| u32 str_table = 0L; |
| u32 note_strings = 0L; |
| u32 action_count = 0L; |
| u32 proc_count = 0L; |
| u32 act_name_id = 0L; |
| u32 act_desc_id = 0L; |
| u32 act_proc_id = 0L; |
| u32 act_proc_name = 0L; |
| u8 act_proc_attribute = 0; |
| |
| if (program_size <= 52L) |
| return status; |
| /* Read header information */ |
| first_word = get_unaligned_be32(&p[0]); |
| |
| if (first_word != 0x4A414D01L) |
| return status; |
| |
| action_table = get_unaligned_be32(&p[4]); |
| proc_table = get_unaligned_be32(&p[8]); |
| str_table = get_unaligned_be32(&p[12]); |
| note_strings = get_unaligned_be32(&p[16]); |
| action_count = get_unaligned_be32(&p[48]); |
| proc_count = get_unaligned_be32(&p[52]); |
| |
| if (index >= action_count) |
| return status; |
| |
| act_name_id = get_unaligned_be32(&p[action_table + (12 * index)]); |
| act_desc_id = get_unaligned_be32(&p[action_table + (12 * index) + 4]); |
| act_proc_id = get_unaligned_be32(&p[action_table + (12 * index) + 8]); |
| |
| *name = &p[str_table + act_name_id]; |
| |
| if (act_desc_id < (note_strings - str_table)) |
| *description = &p[str_table + act_desc_id]; |
| |
| do { |
| act_proc_name = get_unaligned_be32( |
| &p[proc_table + (13 * act_proc_id)]); |
| act_proc_attribute = |
| (p[proc_table + (13 * act_proc_id) + 8] & 0x03); |
| |
| procptr = |
| kzalloc(sizeof(struct altera_procinfo), |
| GFP_KERNEL); |
| |
| if (procptr == NULL) |
| status = -ENOMEM; |
| else { |
| procptr->name = &p[str_table + act_proc_name]; |
| procptr->attrs = act_proc_attribute; |
| procptr->next = NULL; |
| |
| /* add record to end of linked list */ |
| if (*proc_list == NULL) |
| *proc_list = procptr; |
| else { |
| tmpptr = *proc_list; |
| while (tmpptr->next != NULL) |
| tmpptr = tmpptr->next; |
| tmpptr->next = procptr; |
| } |
| } |
| |
| act_proc_id = get_unaligned_be32( |
| &p[proc_table + (13 * act_proc_id) + 4]); |
| } while ((act_proc_id != 0) && (act_proc_id < proc_count)); |
| |
| return status; |
| } |
| |
| int altera_init(struct altera_config *config, const struct firmware *fw) |
| { |
| struct altera_state *astate = NULL; |
| struct altera_procinfo *proc_list = NULL; |
| struct altera_procinfo *procptr = NULL; |
| char *key = NULL; |
| char *value = NULL; |
| char *action_name = NULL; |
| char *description = NULL; |
| int exec_result = 0; |
| int exit_code = 0; |
| int format_version = 0; |
| int action_count = 0; |
| int procedure_count = 0; |
| int index = 0; |
| s32 offset = 0L; |
| s32 error_address = 0L; |
| int retval = 0; |
| |
| key = kzalloc(33, GFP_KERNEL); |
| if (!key) { |
| retval = -ENOMEM; |
| goto out; |
| } |
| value = kzalloc(257, GFP_KERNEL); |
| if (!value) { |
| retval = -ENOMEM; |
| goto free_key; |
| } |
| astate = kzalloc(sizeof(struct altera_state), GFP_KERNEL); |
| if (!astate) { |
| retval = -ENOMEM; |
| goto free_value; |
| } |
| |
| astate->config = config; |
| if (!astate->config->jtag_io) { |
| dprintk("%s: using byteblaster!\n", __func__); |
| astate->config->jtag_io = netup_jtag_io_lpt; |
| } |
| |
| altera_check_crc((u8 *)fw->data, fw->size); |
| |
| if (debug) { |
| altera_get_file_info((u8 *)fw->data, fw->size, &format_version, |
| &action_count, &procedure_count); |
| printk(KERN_INFO "%s: File format is %s ByteCode format\n", |
| __func__, (format_version == 2) ? "Jam STAPL" : |
| "pre-standardized Jam 1.1"); |
| while (altera_get_note((u8 *)fw->data, fw->size, |
| &offset, key, value, 256) == 0) |
| printk(KERN_INFO "%s: NOTE \"%s\" = \"%s\"\n", |
| __func__, key, value); |
| } |
| |
| if (debug && (format_version == 2) && (action_count > 0)) { |
| printk(KERN_INFO "%s: Actions available:\n", __func__); |
| for (index = 0; index < action_count; ++index) { |
| altera_get_act_info((u8 *)fw->data, fw->size, |
| index, &action_name, |
| &description, |
| &proc_list); |
| |
| if (description == NULL) |
| printk(KERN_INFO "%s: %s\n", |
| __func__, |
| action_name); |
| else |
| printk(KERN_INFO "%s: %s \"%s\"\n", |
| __func__, |
| action_name, |
| description); |
| |
| procptr = proc_list; |
| while (procptr != NULL) { |
| if (procptr->attrs != 0) |
| printk(KERN_INFO "%s: %s (%s)\n", |
| __func__, |
| procptr->name, |
| (procptr->attrs == 1) ? |
| "optional" : "recommended"); |
| |
| proc_list = procptr->next; |
| kfree(procptr); |
| procptr = proc_list; |
| } |
| } |
| |
| printk(KERN_INFO "\n"); |
| } |
| |
| exec_result = altera_execute(astate, (u8 *)fw->data, fw->size, |
| &error_address, &exit_code, &format_version); |
| |
| if (exit_code) |
| exec_result = -EREMOTEIO; |
| |
| if ((format_version == 2) && (exec_result == -EINVAL)) { |
| if (astate->config->action == NULL) |
| printk(KERN_ERR "%s: error: no action specified for " |
| "Jam STAPL file.\nprogram terminated.\n", |
| __func__); |
| else |
| printk(KERN_ERR "%s: error: action \"%s\"" |
| " is not supported " |
| "for this Jam STAPL file.\n" |
| "Program terminated.\n", __func__, |
| astate->config->action); |
| |
| } else if (exec_result) |
| printk(KERN_ERR "%s: error %d\n", __func__, exec_result); |
| |
| kfree(astate); |
| free_value: |
| kfree(value); |
| free_key: |
| kfree(key); |
| out: |
| return retval; |
| } |
| EXPORT_SYMBOL(altera_init); |