| // SPDX-License-Identifier: GPL-2.0-only |
| /* |
| * PXA930 track ball mouse driver |
| * |
| * Copyright (C) 2007 Marvell International Ltd. |
| * 2008-02-28: Yong Yao <yaoyong@marvell.com> |
| * initial version |
| */ |
| |
| #include <linux/input.h> |
| #include <linux/interrupt.h> |
| #include <linux/module.h> |
| #include <linux/platform_device.h> |
| #include <linux/delay.h> |
| #include <linux/io.h> |
| #include <linux/slab.h> |
| |
| #include <mach/hardware.h> |
| #include <linux/platform_data/mouse-pxa930_trkball.h> |
| |
| /* Trackball Controller Register Definitions */ |
| #define TBCR (0x000C) |
| #define TBCNTR (0x0010) |
| #define TBSBC (0x0014) |
| |
| #define TBCR_TBRST (1 << 1) |
| #define TBCR_TBSB (1 << 10) |
| |
| #define TBCR_Y_FLT(n) (((n) & 0xf) << 6) |
| #define TBCR_X_FLT(n) (((n) & 0xf) << 2) |
| |
| #define TBCNTR_YM(n) (((n) >> 24) & 0xff) |
| #define TBCNTR_YP(n) (((n) >> 16) & 0xff) |
| #define TBCNTR_XM(n) (((n) >> 8) & 0xff) |
| #define TBCNTR_XP(n) ((n) & 0xff) |
| |
| #define TBSBC_TBSBC (0x1) |
| |
| struct pxa930_trkball { |
| struct pxa930_trkball_platform_data *pdata; |
| |
| /* Memory Mapped Register */ |
| struct resource *mem; |
| void __iomem *mmio_base; |
| |
| struct input_dev *input; |
| }; |
| |
| static irqreturn_t pxa930_trkball_interrupt(int irq, void *dev_id) |
| { |
| struct pxa930_trkball *trkball = dev_id; |
| struct input_dev *input = trkball->input; |
| int tbcntr, x, y; |
| |
| /* According to the spec software must read TBCNTR twice: |
| * if the read value is the same, the reading is valid |
| */ |
| tbcntr = __raw_readl(trkball->mmio_base + TBCNTR); |
| |
| if (tbcntr == __raw_readl(trkball->mmio_base + TBCNTR)) { |
| x = (TBCNTR_XP(tbcntr) - TBCNTR_XM(tbcntr)) / 2; |
| y = (TBCNTR_YP(tbcntr) - TBCNTR_YM(tbcntr)) / 2; |
| |
| input_report_rel(input, REL_X, x); |
| input_report_rel(input, REL_Y, y); |
| input_sync(input); |
| } |
| |
| __raw_writel(TBSBC_TBSBC, trkball->mmio_base + TBSBC); |
| __raw_writel(0, trkball->mmio_base + TBSBC); |
| |
| return IRQ_HANDLED; |
| } |
| |
| /* For TBCR, we need to wait for a while to make sure it has been modified. */ |
| static int write_tbcr(struct pxa930_trkball *trkball, int v) |
| { |
| int i = 100; |
| |
| __raw_writel(v, trkball->mmio_base + TBCR); |
| |
| while (--i) { |
| if (__raw_readl(trkball->mmio_base + TBCR) == v) |
| break; |
| msleep(1); |
| } |
| |
| if (i == 0) { |
| pr_err("%s: timed out writing TBCR(%x)!\n", __func__, v); |
| return -ETIMEDOUT; |
| } |
| |
| return 0; |
| } |
| |
| static void pxa930_trkball_config(struct pxa930_trkball *trkball) |
| { |
| uint32_t tbcr; |
| |
| /* According to spec, need to write the filters of x,y to 0xf first! */ |
| tbcr = __raw_readl(trkball->mmio_base + TBCR); |
| write_tbcr(trkball, tbcr | TBCR_X_FLT(0xf) | TBCR_Y_FLT(0xf)); |
| write_tbcr(trkball, TBCR_X_FLT(trkball->pdata->x_filter) | |
| TBCR_Y_FLT(trkball->pdata->y_filter)); |
| |
| /* According to spec, set TBCR_TBRST first, before clearing it! */ |
| tbcr = __raw_readl(trkball->mmio_base + TBCR); |
| write_tbcr(trkball, tbcr | TBCR_TBRST); |
| write_tbcr(trkball, tbcr & ~TBCR_TBRST); |
| |
| __raw_writel(TBSBC_TBSBC, trkball->mmio_base + TBSBC); |
| __raw_writel(0, trkball->mmio_base + TBSBC); |
| |
| pr_debug("%s: final TBCR=%x!\n", __func__, |
| __raw_readl(trkball->mmio_base + TBCR)); |
| } |
| |
| static int pxa930_trkball_open(struct input_dev *dev) |
| { |
| struct pxa930_trkball *trkball = input_get_drvdata(dev); |
| |
| pxa930_trkball_config(trkball); |
| |
| return 0; |
| } |
| |
| static void pxa930_trkball_disable(struct pxa930_trkball *trkball) |
| { |
| uint32_t tbcr = __raw_readl(trkball->mmio_base + TBCR); |
| |
| /* Held in reset, gate the 32-KHz input clock off */ |
| write_tbcr(trkball, tbcr | TBCR_TBRST); |
| } |
| |
| static void pxa930_trkball_close(struct input_dev *dev) |
| { |
| struct pxa930_trkball *trkball = input_get_drvdata(dev); |
| |
| pxa930_trkball_disable(trkball); |
| } |
| |
| static int pxa930_trkball_probe(struct platform_device *pdev) |
| { |
| struct pxa930_trkball *trkball; |
| struct input_dev *input; |
| struct resource *res; |
| int irq, error; |
| |
| irq = platform_get_irq(pdev, 0); |
| if (irq < 0) { |
| dev_err(&pdev->dev, "failed to get trkball irq\n"); |
| return -ENXIO; |
| } |
| |
| res = platform_get_resource(pdev, IORESOURCE_MEM, 0); |
| if (!res) { |
| dev_err(&pdev->dev, "failed to get register memory\n"); |
| return -ENXIO; |
| } |
| |
| trkball = kzalloc(sizeof(struct pxa930_trkball), GFP_KERNEL); |
| if (!trkball) |
| return -ENOMEM; |
| |
| trkball->pdata = dev_get_platdata(&pdev->dev); |
| if (!trkball->pdata) { |
| dev_err(&pdev->dev, "no platform data defined\n"); |
| error = -EINVAL; |
| goto failed; |
| } |
| |
| trkball->mmio_base = ioremap_nocache(res->start, resource_size(res)); |
| if (!trkball->mmio_base) { |
| dev_err(&pdev->dev, "failed to ioremap registers\n"); |
| error = -ENXIO; |
| goto failed; |
| } |
| |
| /* held the module in reset, will be enabled in open() */ |
| pxa930_trkball_disable(trkball); |
| |
| error = request_irq(irq, pxa930_trkball_interrupt, 0, |
| pdev->name, trkball); |
| if (error) { |
| dev_err(&pdev->dev, "failed to request irq: %d\n", error); |
| goto failed_free_io; |
| } |
| |
| platform_set_drvdata(pdev, trkball); |
| |
| input = input_allocate_device(); |
| if (!input) { |
| dev_err(&pdev->dev, "failed to allocate input device\n"); |
| error = -ENOMEM; |
| goto failed_free_irq; |
| } |
| |
| input->name = pdev->name; |
| input->id.bustype = BUS_HOST; |
| input->open = pxa930_trkball_open; |
| input->close = pxa930_trkball_close; |
| input->dev.parent = &pdev->dev; |
| input_set_drvdata(input, trkball); |
| |
| trkball->input = input; |
| |
| input_set_capability(input, EV_REL, REL_X); |
| input_set_capability(input, EV_REL, REL_Y); |
| |
| error = input_register_device(input); |
| if (error) { |
| dev_err(&pdev->dev, "unable to register input device\n"); |
| goto failed_free_input; |
| } |
| |
| return 0; |
| |
| failed_free_input: |
| input_free_device(input); |
| failed_free_irq: |
| free_irq(irq, trkball); |
| failed_free_io: |
| iounmap(trkball->mmio_base); |
| failed: |
| kfree(trkball); |
| return error; |
| } |
| |
| static int pxa930_trkball_remove(struct platform_device *pdev) |
| { |
| struct pxa930_trkball *trkball = platform_get_drvdata(pdev); |
| int irq = platform_get_irq(pdev, 0); |
| |
| input_unregister_device(trkball->input); |
| free_irq(irq, trkball); |
| iounmap(trkball->mmio_base); |
| kfree(trkball); |
| |
| return 0; |
| } |
| |
| static struct platform_driver pxa930_trkball_driver = { |
| .driver = { |
| .name = "pxa930-trkball", |
| }, |
| .probe = pxa930_trkball_probe, |
| .remove = pxa930_trkball_remove, |
| }; |
| module_platform_driver(pxa930_trkball_driver); |
| |
| MODULE_AUTHOR("Yong Yao <yaoyong@marvell.com>"); |
| MODULE_DESCRIPTION("PXA930 Trackball Mouse Driver"); |
| MODULE_LICENSE("GPL"); |