| // SPDX-License-Identifier: GPL-2.0-only |
| /* |
| * Driver for IMS Passenger Control Unit Devices |
| * |
| * Copyright (C) 2013 The IMS Company |
| */ |
| |
| #include <linux/completion.h> |
| #include <linux/device.h> |
| #include <linux/firmware.h> |
| #include <linux/ihex.h> |
| #include <linux/input.h> |
| #include <linux/kernel.h> |
| #include <linux/leds.h> |
| #include <linux/module.h> |
| #include <linux/slab.h> |
| #include <linux/types.h> |
| #include <linux/usb/input.h> |
| #include <linux/usb/cdc.h> |
| #include <asm/unaligned.h> |
| |
| #define IMS_PCU_KEYMAP_LEN 32 |
| |
| struct ims_pcu_buttons { |
| struct input_dev *input; |
| char name[32]; |
| char phys[32]; |
| unsigned short keymap[IMS_PCU_KEYMAP_LEN]; |
| }; |
| |
| struct ims_pcu_gamepad { |
| struct input_dev *input; |
| char name[32]; |
| char phys[32]; |
| }; |
| |
| struct ims_pcu_backlight { |
| struct led_classdev cdev; |
| char name[32]; |
| }; |
| |
| #define IMS_PCU_PART_NUMBER_LEN 15 |
| #define IMS_PCU_SERIAL_NUMBER_LEN 8 |
| #define IMS_PCU_DOM_LEN 8 |
| #define IMS_PCU_FW_VERSION_LEN (9 + 1) |
| #define IMS_PCU_BL_VERSION_LEN (9 + 1) |
| #define IMS_PCU_BL_RESET_REASON_LEN (2 + 1) |
| |
| #define IMS_PCU_PCU_B_DEVICE_ID 5 |
| |
| #define IMS_PCU_BUF_SIZE 128 |
| |
| struct ims_pcu { |
| struct usb_device *udev; |
| struct device *dev; /* control interface's device, used for logging */ |
| |
| unsigned int device_no; |
| |
| bool bootloader_mode; |
| |
| char part_number[IMS_PCU_PART_NUMBER_LEN]; |
| char serial_number[IMS_PCU_SERIAL_NUMBER_LEN]; |
| char date_of_manufacturing[IMS_PCU_DOM_LEN]; |
| char fw_version[IMS_PCU_FW_VERSION_LEN]; |
| char bl_version[IMS_PCU_BL_VERSION_LEN]; |
| char reset_reason[IMS_PCU_BL_RESET_REASON_LEN]; |
| int update_firmware_status; |
| u8 device_id; |
| |
| u8 ofn_reg_addr; |
| |
| struct usb_interface *ctrl_intf; |
| |
| struct usb_endpoint_descriptor *ep_ctrl; |
| struct urb *urb_ctrl; |
| u8 *urb_ctrl_buf; |
| dma_addr_t ctrl_dma; |
| size_t max_ctrl_size; |
| |
| struct usb_interface *data_intf; |
| |
| struct usb_endpoint_descriptor *ep_in; |
| struct urb *urb_in; |
| u8 *urb_in_buf; |
| dma_addr_t read_dma; |
| size_t max_in_size; |
| |
| struct usb_endpoint_descriptor *ep_out; |
| u8 *urb_out_buf; |
| size_t max_out_size; |
| |
| u8 read_buf[IMS_PCU_BUF_SIZE]; |
| u8 read_pos; |
| u8 check_sum; |
| bool have_stx; |
| bool have_dle; |
| |
| u8 cmd_buf[IMS_PCU_BUF_SIZE]; |
| u8 ack_id; |
| u8 expected_response; |
| u8 cmd_buf_len; |
| struct completion cmd_done; |
| struct mutex cmd_mutex; |
| |
| u32 fw_start_addr; |
| u32 fw_end_addr; |
| struct completion async_firmware_done; |
| |
| struct ims_pcu_buttons buttons; |
| struct ims_pcu_gamepad *gamepad; |
| struct ims_pcu_backlight backlight; |
| |
| bool setup_complete; /* Input and LED devices have been created */ |
| }; |
| |
| |
| /********************************************************************* |
| * Buttons Input device support * |
| *********************************************************************/ |
| |
| static const unsigned short ims_pcu_keymap_1[] = { |
| [1] = KEY_ATTENDANT_OFF, |
| [2] = KEY_ATTENDANT_ON, |
| [3] = KEY_LIGHTS_TOGGLE, |
| [4] = KEY_VOLUMEUP, |
| [5] = KEY_VOLUMEDOWN, |
| [6] = KEY_INFO, |
| }; |
| |
| static const unsigned short ims_pcu_keymap_2[] = { |
| [4] = KEY_VOLUMEUP, |
| [5] = KEY_VOLUMEDOWN, |
| [6] = KEY_INFO, |
| }; |
| |
| static const unsigned short ims_pcu_keymap_3[] = { |
| [1] = KEY_HOMEPAGE, |
| [2] = KEY_ATTENDANT_TOGGLE, |
| [3] = KEY_LIGHTS_TOGGLE, |
| [4] = KEY_VOLUMEUP, |
| [5] = KEY_VOLUMEDOWN, |
| [6] = KEY_DISPLAYTOGGLE, |
| [18] = KEY_PLAYPAUSE, |
| }; |
| |
| static const unsigned short ims_pcu_keymap_4[] = { |
| [1] = KEY_ATTENDANT_OFF, |
| [2] = KEY_ATTENDANT_ON, |
| [3] = KEY_LIGHTS_TOGGLE, |
| [4] = KEY_VOLUMEUP, |
| [5] = KEY_VOLUMEDOWN, |
| [6] = KEY_INFO, |
| [18] = KEY_PLAYPAUSE, |
| }; |
| |
| static const unsigned short ims_pcu_keymap_5[] = { |
| [1] = KEY_ATTENDANT_OFF, |
| [2] = KEY_ATTENDANT_ON, |
| [3] = KEY_LIGHTS_TOGGLE, |
| }; |
| |
| struct ims_pcu_device_info { |
| const unsigned short *keymap; |
| size_t keymap_len; |
| bool has_gamepad; |
| }; |
| |
| #define IMS_PCU_DEVINFO(_n, _gamepad) \ |
| [_n] = { \ |
| .keymap = ims_pcu_keymap_##_n, \ |
| .keymap_len = ARRAY_SIZE(ims_pcu_keymap_##_n), \ |
| .has_gamepad = _gamepad, \ |
| } |
| |
| static const struct ims_pcu_device_info ims_pcu_device_info[] = { |
| IMS_PCU_DEVINFO(1, true), |
| IMS_PCU_DEVINFO(2, true), |
| IMS_PCU_DEVINFO(3, true), |
| IMS_PCU_DEVINFO(4, true), |
| IMS_PCU_DEVINFO(5, false), |
| }; |
| |
| static void ims_pcu_buttons_report(struct ims_pcu *pcu, u32 data) |
| { |
| struct ims_pcu_buttons *buttons = &pcu->buttons; |
| struct input_dev *input = buttons->input; |
| int i; |
| |
| for (i = 0; i < 32; i++) { |
| unsigned short keycode = buttons->keymap[i]; |
| |
| if (keycode != KEY_RESERVED) |
| input_report_key(input, keycode, data & (1UL << i)); |
| } |
| |
| input_sync(input); |
| } |
| |
| static int ims_pcu_setup_buttons(struct ims_pcu *pcu, |
| const unsigned short *keymap, |
| size_t keymap_len) |
| { |
| struct ims_pcu_buttons *buttons = &pcu->buttons; |
| struct input_dev *input; |
| int i; |
| int error; |
| |
| input = input_allocate_device(); |
| if (!input) { |
| dev_err(pcu->dev, |
| "Not enough memory for input input device\n"); |
| return -ENOMEM; |
| } |
| |
| snprintf(buttons->name, sizeof(buttons->name), |
| "IMS PCU#%d Button Interface", pcu->device_no); |
| |
| usb_make_path(pcu->udev, buttons->phys, sizeof(buttons->phys)); |
| strlcat(buttons->phys, "/input0", sizeof(buttons->phys)); |
| |
| memcpy(buttons->keymap, keymap, sizeof(*keymap) * keymap_len); |
| |
| input->name = buttons->name; |
| input->phys = buttons->phys; |
| usb_to_input_id(pcu->udev, &input->id); |
| input->dev.parent = &pcu->ctrl_intf->dev; |
| |
| input->keycode = buttons->keymap; |
| input->keycodemax = ARRAY_SIZE(buttons->keymap); |
| input->keycodesize = sizeof(buttons->keymap[0]); |
| |
| __set_bit(EV_KEY, input->evbit); |
| for (i = 0; i < IMS_PCU_KEYMAP_LEN; i++) |
| __set_bit(buttons->keymap[i], input->keybit); |
| __clear_bit(KEY_RESERVED, input->keybit); |
| |
| error = input_register_device(input); |
| if (error) { |
| dev_err(pcu->dev, |
| "Failed to register buttons input device: %d\n", |
| error); |
| input_free_device(input); |
| return error; |
| } |
| |
| buttons->input = input; |
| return 0; |
| } |
| |
| static void ims_pcu_destroy_buttons(struct ims_pcu *pcu) |
| { |
| struct ims_pcu_buttons *buttons = &pcu->buttons; |
| |
| input_unregister_device(buttons->input); |
| } |
| |
| |
| /********************************************************************* |
| * Gamepad Input device support * |
| *********************************************************************/ |
| |
| static void ims_pcu_gamepad_report(struct ims_pcu *pcu, u32 data) |
| { |
| struct ims_pcu_gamepad *gamepad = pcu->gamepad; |
| struct input_dev *input = gamepad->input; |
| int x, y; |
| |
| x = !!(data & (1 << 14)) - !!(data & (1 << 13)); |
| y = !!(data & (1 << 12)) - !!(data & (1 << 11)); |
| |
| input_report_abs(input, ABS_X, x); |
| input_report_abs(input, ABS_Y, y); |
| |
| input_report_key(input, BTN_A, data & (1 << 7)); |
| input_report_key(input, BTN_B, data & (1 << 8)); |
| input_report_key(input, BTN_X, data & (1 << 9)); |
| input_report_key(input, BTN_Y, data & (1 << 10)); |
| input_report_key(input, BTN_START, data & (1 << 15)); |
| input_report_key(input, BTN_SELECT, data & (1 << 16)); |
| |
| input_sync(input); |
| } |
| |
| static int ims_pcu_setup_gamepad(struct ims_pcu *pcu) |
| { |
| struct ims_pcu_gamepad *gamepad; |
| struct input_dev *input; |
| int error; |
| |
| gamepad = kzalloc(sizeof(struct ims_pcu_gamepad), GFP_KERNEL); |
| input = input_allocate_device(); |
| if (!gamepad || !input) { |
| dev_err(pcu->dev, |
| "Not enough memory for gamepad device\n"); |
| error = -ENOMEM; |
| goto err_free_mem; |
| } |
| |
| gamepad->input = input; |
| |
| snprintf(gamepad->name, sizeof(gamepad->name), |
| "IMS PCU#%d Gamepad Interface", pcu->device_no); |
| |
| usb_make_path(pcu->udev, gamepad->phys, sizeof(gamepad->phys)); |
| strlcat(gamepad->phys, "/input1", sizeof(gamepad->phys)); |
| |
| input->name = gamepad->name; |
| input->phys = gamepad->phys; |
| usb_to_input_id(pcu->udev, &input->id); |
| input->dev.parent = &pcu->ctrl_intf->dev; |
| |
| __set_bit(EV_KEY, input->evbit); |
| __set_bit(BTN_A, input->keybit); |
| __set_bit(BTN_B, input->keybit); |
| __set_bit(BTN_X, input->keybit); |
| __set_bit(BTN_Y, input->keybit); |
| __set_bit(BTN_START, input->keybit); |
| __set_bit(BTN_SELECT, input->keybit); |
| |
| __set_bit(EV_ABS, input->evbit); |
| input_set_abs_params(input, ABS_X, -1, 1, 0, 0); |
| input_set_abs_params(input, ABS_Y, -1, 1, 0, 0); |
| |
| error = input_register_device(input); |
| if (error) { |
| dev_err(pcu->dev, |
| "Failed to register gamepad input device: %d\n", |
| error); |
| goto err_free_mem; |
| } |
| |
| pcu->gamepad = gamepad; |
| return 0; |
| |
| err_free_mem: |
| input_free_device(input); |
| kfree(gamepad); |
| return -ENOMEM; |
| } |
| |
| static void ims_pcu_destroy_gamepad(struct ims_pcu *pcu) |
| { |
| struct ims_pcu_gamepad *gamepad = pcu->gamepad; |
| |
| input_unregister_device(gamepad->input); |
| kfree(gamepad); |
| } |
| |
| |
| /********************************************************************* |
| * PCU Communication protocol handling * |
| *********************************************************************/ |
| |
| #define IMS_PCU_PROTOCOL_STX 0x02 |
| #define IMS_PCU_PROTOCOL_ETX 0x03 |
| #define IMS_PCU_PROTOCOL_DLE 0x10 |
| |
| /* PCU commands */ |
| #define IMS_PCU_CMD_STATUS 0xa0 |
| #define IMS_PCU_CMD_PCU_RESET 0xa1 |
| #define IMS_PCU_CMD_RESET_REASON 0xa2 |
| #define IMS_PCU_CMD_SEND_BUTTONS 0xa3 |
| #define IMS_PCU_CMD_JUMP_TO_BTLDR 0xa4 |
| #define IMS_PCU_CMD_GET_INFO 0xa5 |
| #define IMS_PCU_CMD_SET_BRIGHTNESS 0xa6 |
| #define IMS_PCU_CMD_EEPROM 0xa7 |
| #define IMS_PCU_CMD_GET_FW_VERSION 0xa8 |
| #define IMS_PCU_CMD_GET_BL_VERSION 0xa9 |
| #define IMS_PCU_CMD_SET_INFO 0xab |
| #define IMS_PCU_CMD_GET_BRIGHTNESS 0xac |
| #define IMS_PCU_CMD_GET_DEVICE_ID 0xae |
| #define IMS_PCU_CMD_SPECIAL_INFO 0xb0 |
| #define IMS_PCU_CMD_BOOTLOADER 0xb1 /* Pass data to bootloader */ |
| #define IMS_PCU_CMD_OFN_SET_CONFIG 0xb3 |
| #define IMS_PCU_CMD_OFN_GET_CONFIG 0xb4 |
| |
| /* PCU responses */ |
| #define IMS_PCU_RSP_STATUS 0xc0 |
| #define IMS_PCU_RSP_PCU_RESET 0 /* Originally 0xc1 */ |
| #define IMS_PCU_RSP_RESET_REASON 0xc2 |
| #define IMS_PCU_RSP_SEND_BUTTONS 0xc3 |
| #define IMS_PCU_RSP_JUMP_TO_BTLDR 0 /* Originally 0xc4 */ |
| #define IMS_PCU_RSP_GET_INFO 0xc5 |
| #define IMS_PCU_RSP_SET_BRIGHTNESS 0xc6 |
| #define IMS_PCU_RSP_EEPROM 0xc7 |
| #define IMS_PCU_RSP_GET_FW_VERSION 0xc8 |
| #define IMS_PCU_RSP_GET_BL_VERSION 0xc9 |
| #define IMS_PCU_RSP_SET_INFO 0xcb |
| #define IMS_PCU_RSP_GET_BRIGHTNESS 0xcc |
| #define IMS_PCU_RSP_CMD_INVALID 0xcd |
| #define IMS_PCU_RSP_GET_DEVICE_ID 0xce |
| #define IMS_PCU_RSP_SPECIAL_INFO 0xd0 |
| #define IMS_PCU_RSP_BOOTLOADER 0xd1 /* Bootloader response */ |
| #define IMS_PCU_RSP_OFN_SET_CONFIG 0xd2 |
| #define IMS_PCU_RSP_OFN_GET_CONFIG 0xd3 |
| |
| |
| #define IMS_PCU_RSP_EVNT_BUTTONS 0xe0 /* Unsolicited, button state */ |
| #define IMS_PCU_GAMEPAD_MASK 0x0001ff80UL /* Bits 7 through 16 */ |
| |
| |
| #define IMS_PCU_MIN_PACKET_LEN 3 |
| #define IMS_PCU_DATA_OFFSET 2 |
| |
| #define IMS_PCU_CMD_WRITE_TIMEOUT 100 /* msec */ |
| #define IMS_PCU_CMD_RESPONSE_TIMEOUT 500 /* msec */ |
| |
| static void ims_pcu_report_events(struct ims_pcu *pcu) |
| { |
| u32 data = get_unaligned_be32(&pcu->read_buf[3]); |
| |
| ims_pcu_buttons_report(pcu, data & ~IMS_PCU_GAMEPAD_MASK); |
| if (pcu->gamepad) |
| ims_pcu_gamepad_report(pcu, data); |
| } |
| |
| static void ims_pcu_handle_response(struct ims_pcu *pcu) |
| { |
| switch (pcu->read_buf[0]) { |
| case IMS_PCU_RSP_EVNT_BUTTONS: |
| if (likely(pcu->setup_complete)) |
| ims_pcu_report_events(pcu); |
| break; |
| |
| default: |
| /* |
| * See if we got command completion. |
| * If both the sequence and response code match save |
| * the data and signal completion. |
| */ |
| if (pcu->read_buf[0] == pcu->expected_response && |
| pcu->read_buf[1] == pcu->ack_id - 1) { |
| |
| memcpy(pcu->cmd_buf, pcu->read_buf, pcu->read_pos); |
| pcu->cmd_buf_len = pcu->read_pos; |
| complete(&pcu->cmd_done); |
| } |
| break; |
| } |
| } |
| |
| static void ims_pcu_process_data(struct ims_pcu *pcu, struct urb *urb) |
| { |
| int i; |
| |
| for (i = 0; i < urb->actual_length; i++) { |
| u8 data = pcu->urb_in_buf[i]; |
| |
| /* Skip everything until we get Start Xmit */ |
| if (!pcu->have_stx && data != IMS_PCU_PROTOCOL_STX) |
| continue; |
| |
| if (pcu->have_dle) { |
| pcu->have_dle = false; |
| pcu->read_buf[pcu->read_pos++] = data; |
| pcu->check_sum += data; |
| continue; |
| } |
| |
| switch (data) { |
| case IMS_PCU_PROTOCOL_STX: |
| if (pcu->have_stx) |
| dev_warn(pcu->dev, |
| "Unexpected STX at byte %d, discarding old data\n", |
| pcu->read_pos); |
| pcu->have_stx = true; |
| pcu->have_dle = false; |
| pcu->read_pos = 0; |
| pcu->check_sum = 0; |
| break; |
| |
| case IMS_PCU_PROTOCOL_DLE: |
| pcu->have_dle = true; |
| break; |
| |
| case IMS_PCU_PROTOCOL_ETX: |
| if (pcu->read_pos < IMS_PCU_MIN_PACKET_LEN) { |
| dev_warn(pcu->dev, |
| "Short packet received (%d bytes), ignoring\n", |
| pcu->read_pos); |
| } else if (pcu->check_sum != 0) { |
| dev_warn(pcu->dev, |
| "Invalid checksum in packet (%d bytes), ignoring\n", |
| pcu->read_pos); |
| } else { |
| ims_pcu_handle_response(pcu); |
| } |
| |
| pcu->have_stx = false; |
| pcu->have_dle = false; |
| pcu->read_pos = 0; |
| break; |
| |
| default: |
| pcu->read_buf[pcu->read_pos++] = data; |
| pcu->check_sum += data; |
| break; |
| } |
| } |
| } |
| |
| static bool ims_pcu_byte_needs_escape(u8 byte) |
| { |
| return byte == IMS_PCU_PROTOCOL_STX || |
| byte == IMS_PCU_PROTOCOL_ETX || |
| byte == IMS_PCU_PROTOCOL_DLE; |
| } |
| |
| static int ims_pcu_send_cmd_chunk(struct ims_pcu *pcu, |
| u8 command, int chunk, int len) |
| { |
| int error; |
| |
| error = usb_bulk_msg(pcu->udev, |
| usb_sndbulkpipe(pcu->udev, |
| pcu->ep_out->bEndpointAddress), |
| pcu->urb_out_buf, len, |
| NULL, IMS_PCU_CMD_WRITE_TIMEOUT); |
| if (error < 0) { |
| dev_dbg(pcu->dev, |
| "Sending 0x%02x command failed at chunk %d: %d\n", |
| command, chunk, error); |
| return error; |
| } |
| |
| return 0; |
| } |
| |
| static int ims_pcu_send_command(struct ims_pcu *pcu, |
| u8 command, const u8 *data, int len) |
| { |
| int count = 0; |
| int chunk = 0; |
| int delta; |
| int i; |
| int error; |
| u8 csum = 0; |
| u8 ack_id; |
| |
| pcu->urb_out_buf[count++] = IMS_PCU_PROTOCOL_STX; |
| |
| /* We know the command need not be escaped */ |
| pcu->urb_out_buf[count++] = command; |
| csum += command; |
| |
| ack_id = pcu->ack_id++; |
| if (ack_id == 0xff) |
| ack_id = pcu->ack_id++; |
| |
| if (ims_pcu_byte_needs_escape(ack_id)) |
| pcu->urb_out_buf[count++] = IMS_PCU_PROTOCOL_DLE; |
| |
| pcu->urb_out_buf[count++] = ack_id; |
| csum += ack_id; |
| |
| for (i = 0; i < len; i++) { |
| |
| delta = ims_pcu_byte_needs_escape(data[i]) ? 2 : 1; |
| if (count + delta >= pcu->max_out_size) { |
| error = ims_pcu_send_cmd_chunk(pcu, command, |
| ++chunk, count); |
| if (error) |
| return error; |
| |
| count = 0; |
| } |
| |
| if (delta == 2) |
| pcu->urb_out_buf[count++] = IMS_PCU_PROTOCOL_DLE; |
| |
| pcu->urb_out_buf[count++] = data[i]; |
| csum += data[i]; |
| } |
| |
| csum = 1 + ~csum; |
| |
| delta = ims_pcu_byte_needs_escape(csum) ? 3 : 2; |
| if (count + delta >= pcu->max_out_size) { |
| error = ims_pcu_send_cmd_chunk(pcu, command, ++chunk, count); |
| if (error) |
| return error; |
| |
| count = 0; |
| } |
| |
| if (delta == 3) |
| pcu->urb_out_buf[count++] = IMS_PCU_PROTOCOL_DLE; |
| |
| pcu->urb_out_buf[count++] = csum; |
| pcu->urb_out_buf[count++] = IMS_PCU_PROTOCOL_ETX; |
| |
| return ims_pcu_send_cmd_chunk(pcu, command, ++chunk, count); |
| } |
| |
| static int __ims_pcu_execute_command(struct ims_pcu *pcu, |
| u8 command, const void *data, size_t len, |
| u8 expected_response, int response_time) |
| { |
| int error; |
| |
| pcu->expected_response = expected_response; |
| init_completion(&pcu->cmd_done); |
| |
| error = ims_pcu_send_command(pcu, command, data, len); |
| if (error) |
| return error; |
| |
| if (expected_response && |
| !wait_for_completion_timeout(&pcu->cmd_done, |
| msecs_to_jiffies(response_time))) { |
| dev_dbg(pcu->dev, "Command 0x%02x timed out\n", command); |
| return -ETIMEDOUT; |
| } |
| |
| return 0; |
| } |
| |
| #define ims_pcu_execute_command(pcu, code, data, len) \ |
| __ims_pcu_execute_command(pcu, \ |
| IMS_PCU_CMD_##code, data, len, \ |
| IMS_PCU_RSP_##code, \ |
| IMS_PCU_CMD_RESPONSE_TIMEOUT) |
| |
| #define ims_pcu_execute_query(pcu, code) \ |
| ims_pcu_execute_command(pcu, code, NULL, 0) |
| |
| /* Bootloader commands */ |
| #define IMS_PCU_BL_CMD_QUERY_DEVICE 0xa1 |
| #define IMS_PCU_BL_CMD_UNLOCK_CONFIG 0xa2 |
| #define IMS_PCU_BL_CMD_ERASE_APP 0xa3 |
| #define IMS_PCU_BL_CMD_PROGRAM_DEVICE 0xa4 |
| #define IMS_PCU_BL_CMD_PROGRAM_COMPLETE 0xa5 |
| #define IMS_PCU_BL_CMD_READ_APP 0xa6 |
| #define IMS_PCU_BL_CMD_RESET_DEVICE 0xa7 |
| #define IMS_PCU_BL_CMD_LAUNCH_APP 0xa8 |
| |
| /* Bootloader commands */ |
| #define IMS_PCU_BL_RSP_QUERY_DEVICE 0xc1 |
| #define IMS_PCU_BL_RSP_UNLOCK_CONFIG 0xc2 |
| #define IMS_PCU_BL_RSP_ERASE_APP 0xc3 |
| #define IMS_PCU_BL_RSP_PROGRAM_DEVICE 0xc4 |
| #define IMS_PCU_BL_RSP_PROGRAM_COMPLETE 0xc5 |
| #define IMS_PCU_BL_RSP_READ_APP 0xc6 |
| #define IMS_PCU_BL_RSP_RESET_DEVICE 0 /* originally 0xa7 */ |
| #define IMS_PCU_BL_RSP_LAUNCH_APP 0 /* originally 0xa8 */ |
| |
| #define IMS_PCU_BL_DATA_OFFSET 3 |
| |
| static int __ims_pcu_execute_bl_command(struct ims_pcu *pcu, |
| u8 command, const void *data, size_t len, |
| u8 expected_response, int response_time) |
| { |
| int error; |
| |
| pcu->cmd_buf[0] = command; |
| if (data) |
| memcpy(&pcu->cmd_buf[1], data, len); |
| |
| error = __ims_pcu_execute_command(pcu, |
| IMS_PCU_CMD_BOOTLOADER, pcu->cmd_buf, len + 1, |
| expected_response ? IMS_PCU_RSP_BOOTLOADER : 0, |
| response_time); |
| if (error) { |
| dev_err(pcu->dev, |
| "Failure when sending 0x%02x command to bootloader, error: %d\n", |
| pcu->cmd_buf[0], error); |
| return error; |
| } |
| |
| if (expected_response && pcu->cmd_buf[2] != expected_response) { |
| dev_err(pcu->dev, |
| "Unexpected response from bootloader: 0x%02x, wanted 0x%02x\n", |
| pcu->cmd_buf[2], expected_response); |
| return -EINVAL; |
| } |
| |
| return 0; |
| } |
| |
| #define ims_pcu_execute_bl_command(pcu, code, data, len, timeout) \ |
| __ims_pcu_execute_bl_command(pcu, \ |
| IMS_PCU_BL_CMD_##code, data, len, \ |
| IMS_PCU_BL_RSP_##code, timeout) \ |
| |
| #define IMS_PCU_INFO_PART_OFFSET 2 |
| #define IMS_PCU_INFO_DOM_OFFSET 17 |
| #define IMS_PCU_INFO_SERIAL_OFFSET 25 |
| |
| #define IMS_PCU_SET_INFO_SIZE 31 |
| |
| static int ims_pcu_get_info(struct ims_pcu *pcu) |
| { |
| int error; |
| |
| error = ims_pcu_execute_query(pcu, GET_INFO); |
| if (error) { |
| dev_err(pcu->dev, |
| "GET_INFO command failed, error: %d\n", error); |
| return error; |
| } |
| |
| memcpy(pcu->part_number, |
| &pcu->cmd_buf[IMS_PCU_INFO_PART_OFFSET], |
| sizeof(pcu->part_number)); |
| memcpy(pcu->date_of_manufacturing, |
| &pcu->cmd_buf[IMS_PCU_INFO_DOM_OFFSET], |
| sizeof(pcu->date_of_manufacturing)); |
| memcpy(pcu->serial_number, |
| &pcu->cmd_buf[IMS_PCU_INFO_SERIAL_OFFSET], |
| sizeof(pcu->serial_number)); |
| |
| return 0; |
| } |
| |
| static int ims_pcu_set_info(struct ims_pcu *pcu) |
| { |
| int error; |
| |
| memcpy(&pcu->cmd_buf[IMS_PCU_INFO_PART_OFFSET], |
| pcu->part_number, sizeof(pcu->part_number)); |
| memcpy(&pcu->cmd_buf[IMS_PCU_INFO_DOM_OFFSET], |
| pcu->date_of_manufacturing, sizeof(pcu->date_of_manufacturing)); |
| memcpy(&pcu->cmd_buf[IMS_PCU_INFO_SERIAL_OFFSET], |
| pcu->serial_number, sizeof(pcu->serial_number)); |
| |
| error = ims_pcu_execute_command(pcu, SET_INFO, |
| &pcu->cmd_buf[IMS_PCU_DATA_OFFSET], |
| IMS_PCU_SET_INFO_SIZE); |
| if (error) { |
| dev_err(pcu->dev, |
| "Failed to update device information, error: %d\n", |
| error); |
| return error; |
| } |
| |
| return 0; |
| } |
| |
| static int ims_pcu_switch_to_bootloader(struct ims_pcu *pcu) |
| { |
| int error; |
| |
| /* Execute jump to the bootoloader */ |
| error = ims_pcu_execute_command(pcu, JUMP_TO_BTLDR, NULL, 0); |
| if (error) { |
| dev_err(pcu->dev, |
| "Failure when sending JUMP TO BOOLTLOADER command, error: %d\n", |
| error); |
| return error; |
| } |
| |
| return 0; |
| } |
| |
| /********************************************************************* |
| * Firmware Update handling * |
| *********************************************************************/ |
| |
| #define IMS_PCU_FIRMWARE_NAME "imspcu.fw" |
| |
| struct ims_pcu_flash_fmt { |
| __le32 addr; |
| u8 len; |
| u8 data[]; |
| }; |
| |
| static unsigned int ims_pcu_count_fw_records(const struct firmware *fw) |
| { |
| const struct ihex_binrec *rec = (const struct ihex_binrec *)fw->data; |
| unsigned int count = 0; |
| |
| while (rec) { |
| count++; |
| rec = ihex_next_binrec(rec); |
| } |
| |
| return count; |
| } |
| |
| static int ims_pcu_verify_block(struct ims_pcu *pcu, |
| u32 addr, u8 len, const u8 *data) |
| { |
| struct ims_pcu_flash_fmt *fragment; |
| int error; |
| |
| fragment = (void *)&pcu->cmd_buf[1]; |
| put_unaligned_le32(addr, &fragment->addr); |
| fragment->len = len; |
| |
| error = ims_pcu_execute_bl_command(pcu, READ_APP, NULL, 5, |
| IMS_PCU_CMD_RESPONSE_TIMEOUT); |
| if (error) { |
| dev_err(pcu->dev, |
| "Failed to retrieve block at 0x%08x, len %d, error: %d\n", |
| addr, len, error); |
| return error; |
| } |
| |
| fragment = (void *)&pcu->cmd_buf[IMS_PCU_BL_DATA_OFFSET]; |
| if (get_unaligned_le32(&fragment->addr) != addr || |
| fragment->len != len) { |
| dev_err(pcu->dev, |
| "Wrong block when retrieving 0x%08x (0x%08x), len %d (%d)\n", |
| addr, get_unaligned_le32(&fragment->addr), |
| len, fragment->len); |
| return -EINVAL; |
| } |
| |
| if (memcmp(fragment->data, data, len)) { |
| dev_err(pcu->dev, |
| "Mismatch in block at 0x%08x, len %d\n", |
| addr, len); |
| return -EINVAL; |
| } |
| |
| return 0; |
| } |
| |
| static int ims_pcu_flash_firmware(struct ims_pcu *pcu, |
| const struct firmware *fw, |
| unsigned int n_fw_records) |
| { |
| const struct ihex_binrec *rec = (const struct ihex_binrec *)fw->data; |
| struct ims_pcu_flash_fmt *fragment; |
| unsigned int count = 0; |
| u32 addr; |
| u8 len; |
| int error; |
| |
| error = ims_pcu_execute_bl_command(pcu, ERASE_APP, NULL, 0, 2000); |
| if (error) { |
| dev_err(pcu->dev, |
| "Failed to erase application image, error: %d\n", |
| error); |
| return error; |
| } |
| |
| while (rec) { |
| /* |
| * The firmware format is messed up for some reason. |
| * The address twice that of what is needed for some |
| * reason and we end up overwriting half of the data |
| * with the next record. |
| */ |
| addr = be32_to_cpu(rec->addr) / 2; |
| len = be16_to_cpu(rec->len); |
| |
| fragment = (void *)&pcu->cmd_buf[1]; |
| put_unaligned_le32(addr, &fragment->addr); |
| fragment->len = len; |
| memcpy(fragment->data, rec->data, len); |
| |
| error = ims_pcu_execute_bl_command(pcu, PROGRAM_DEVICE, |
| NULL, len + 5, |
| IMS_PCU_CMD_RESPONSE_TIMEOUT); |
| if (error) { |
| dev_err(pcu->dev, |
| "Failed to write block at 0x%08x, len %d, error: %d\n", |
| addr, len, error); |
| return error; |
| } |
| |
| if (addr >= pcu->fw_start_addr && addr < pcu->fw_end_addr) { |
| error = ims_pcu_verify_block(pcu, addr, len, rec->data); |
| if (error) |
| return error; |
| } |
| |
| count++; |
| pcu->update_firmware_status = (count * 100) / n_fw_records; |
| |
| rec = ihex_next_binrec(rec); |
| } |
| |
| error = ims_pcu_execute_bl_command(pcu, PROGRAM_COMPLETE, |
| NULL, 0, 2000); |
| if (error) |
| dev_err(pcu->dev, |
| "Failed to send PROGRAM_COMPLETE, error: %d\n", |
| error); |
| |
| return 0; |
| } |
| |
| static int ims_pcu_handle_firmware_update(struct ims_pcu *pcu, |
| const struct firmware *fw) |
| { |
| unsigned int n_fw_records; |
| int retval; |
| |
| dev_info(pcu->dev, "Updating firmware %s, size: %zu\n", |
| IMS_PCU_FIRMWARE_NAME, fw->size); |
| |
| n_fw_records = ims_pcu_count_fw_records(fw); |
| |
| retval = ims_pcu_flash_firmware(pcu, fw, n_fw_records); |
| if (retval) |
| goto out; |
| |
| retval = ims_pcu_execute_bl_command(pcu, LAUNCH_APP, NULL, 0, 0); |
| if (retval) |
| dev_err(pcu->dev, |
| "Failed to start application image, error: %d\n", |
| retval); |
| |
| out: |
| pcu->update_firmware_status = retval; |
| sysfs_notify(&pcu->dev->kobj, NULL, "update_firmware_status"); |
| return retval; |
| } |
| |
| static void ims_pcu_process_async_firmware(const struct firmware *fw, |
| void *context) |
| { |
| struct ims_pcu *pcu = context; |
| int error; |
| |
| if (!fw) { |
| dev_err(pcu->dev, "Failed to get firmware %s\n", |
| IMS_PCU_FIRMWARE_NAME); |
| goto out; |
| } |
| |
| error = ihex_validate_fw(fw); |
| if (error) { |
| dev_err(pcu->dev, "Firmware %s is invalid\n", |
| IMS_PCU_FIRMWARE_NAME); |
| goto out; |
| } |
| |
| mutex_lock(&pcu->cmd_mutex); |
| ims_pcu_handle_firmware_update(pcu, fw); |
| mutex_unlock(&pcu->cmd_mutex); |
| |
| release_firmware(fw); |
| |
| out: |
| complete(&pcu->async_firmware_done); |
| } |
| |
| /********************************************************************* |
| * Backlight LED device support * |
| *********************************************************************/ |
| |
| #define IMS_PCU_MAX_BRIGHTNESS 31998 |
| |
| static int ims_pcu_backlight_set_brightness(struct led_classdev *cdev, |
| enum led_brightness value) |
| { |
| struct ims_pcu_backlight *backlight = |
| container_of(cdev, struct ims_pcu_backlight, cdev); |
| struct ims_pcu *pcu = |
| container_of(backlight, struct ims_pcu, backlight); |
| __le16 br_val = cpu_to_le16(value); |
| int error; |
| |
| mutex_lock(&pcu->cmd_mutex); |
| |
| error = ims_pcu_execute_command(pcu, SET_BRIGHTNESS, |
| &br_val, sizeof(br_val)); |
| if (error && error != -ENODEV) |
| dev_warn(pcu->dev, |
| "Failed to set desired brightness %u, error: %d\n", |
| value, error); |
| |
| mutex_unlock(&pcu->cmd_mutex); |
| |
| return error; |
| } |
| |
| static enum led_brightness |
| ims_pcu_backlight_get_brightness(struct led_classdev *cdev) |
| { |
| struct ims_pcu_backlight *backlight = |
| container_of(cdev, struct ims_pcu_backlight, cdev); |
| struct ims_pcu *pcu = |
| container_of(backlight, struct ims_pcu, backlight); |
| int brightness; |
| int error; |
| |
| mutex_lock(&pcu->cmd_mutex); |
| |
| error = ims_pcu_execute_query(pcu, GET_BRIGHTNESS); |
| if (error) { |
| dev_warn(pcu->dev, |
| "Failed to get current brightness, error: %d\n", |
| error); |
| /* Assume the LED is OFF */ |
| brightness = LED_OFF; |
| } else { |
| brightness = |
| get_unaligned_le16(&pcu->cmd_buf[IMS_PCU_DATA_OFFSET]); |
| } |
| |
| mutex_unlock(&pcu->cmd_mutex); |
| |
| return brightness; |
| } |
| |
| static int ims_pcu_setup_backlight(struct ims_pcu *pcu) |
| { |
| struct ims_pcu_backlight *backlight = &pcu->backlight; |
| int error; |
| |
| snprintf(backlight->name, sizeof(backlight->name), |
| "pcu%d::kbd_backlight", pcu->device_no); |
| |
| backlight->cdev.name = backlight->name; |
| backlight->cdev.max_brightness = IMS_PCU_MAX_BRIGHTNESS; |
| backlight->cdev.brightness_get = ims_pcu_backlight_get_brightness; |
| backlight->cdev.brightness_set_blocking = |
| ims_pcu_backlight_set_brightness; |
| |
| error = led_classdev_register(pcu->dev, &backlight->cdev); |
| if (error) { |
| dev_err(pcu->dev, |
| "Failed to register backlight LED device, error: %d\n", |
| error); |
| return error; |
| } |
| |
| return 0; |
| } |
| |
| static void ims_pcu_destroy_backlight(struct ims_pcu *pcu) |
| { |
| struct ims_pcu_backlight *backlight = &pcu->backlight; |
| |
| led_classdev_unregister(&backlight->cdev); |
| } |
| |
| |
| /********************************************************************* |
| * Sysfs attributes handling * |
| *********************************************************************/ |
| |
| struct ims_pcu_attribute { |
| struct device_attribute dattr; |
| size_t field_offset; |
| int field_length; |
| }; |
| |
| static ssize_t ims_pcu_attribute_show(struct device *dev, |
| struct device_attribute *dattr, |
| char *buf) |
| { |
| struct usb_interface *intf = to_usb_interface(dev); |
| struct ims_pcu *pcu = usb_get_intfdata(intf); |
| struct ims_pcu_attribute *attr = |
| container_of(dattr, struct ims_pcu_attribute, dattr); |
| char *field = (char *)pcu + attr->field_offset; |
| |
| return scnprintf(buf, PAGE_SIZE, "%.*s\n", attr->field_length, field); |
| } |
| |
| static ssize_t ims_pcu_attribute_store(struct device *dev, |
| struct device_attribute *dattr, |
| const char *buf, size_t count) |
| { |
| |
| struct usb_interface *intf = to_usb_interface(dev); |
| struct ims_pcu *pcu = usb_get_intfdata(intf); |
| struct ims_pcu_attribute *attr = |
| container_of(dattr, struct ims_pcu_attribute, dattr); |
| char *field = (char *)pcu + attr->field_offset; |
| size_t data_len; |
| int error; |
| |
| if (count > attr->field_length) |
| return -EINVAL; |
| |
| data_len = strnlen(buf, attr->field_length); |
| if (data_len > attr->field_length) |
| return -EINVAL; |
| |
| error = mutex_lock_interruptible(&pcu->cmd_mutex); |
| if (error) |
| return error; |
| |
| memset(field, 0, attr->field_length); |
| memcpy(field, buf, data_len); |
| |
| error = ims_pcu_set_info(pcu); |
| |
| /* |
| * Even if update failed, let's fetch the info again as we just |
| * clobbered one of the fields. |
| */ |
| ims_pcu_get_info(pcu); |
| |
| mutex_unlock(&pcu->cmd_mutex); |
| |
| return error < 0 ? error : count; |
| } |
| |
| #define IMS_PCU_ATTR(_field, _mode) \ |
| struct ims_pcu_attribute ims_pcu_attr_##_field = { \ |
| .dattr = __ATTR(_field, _mode, \ |
| ims_pcu_attribute_show, \ |
| ims_pcu_attribute_store), \ |
| .field_offset = offsetof(struct ims_pcu, _field), \ |
| .field_length = sizeof(((struct ims_pcu *)NULL)->_field), \ |
| } |
| |
| #define IMS_PCU_RO_ATTR(_field) \ |
| IMS_PCU_ATTR(_field, S_IRUGO) |
| #define IMS_PCU_RW_ATTR(_field) \ |
| IMS_PCU_ATTR(_field, S_IRUGO | S_IWUSR) |
| |
| static IMS_PCU_RW_ATTR(part_number); |
| static IMS_PCU_RW_ATTR(serial_number); |
| static IMS_PCU_RW_ATTR(date_of_manufacturing); |
| |
| static IMS_PCU_RO_ATTR(fw_version); |
| static IMS_PCU_RO_ATTR(bl_version); |
| static IMS_PCU_RO_ATTR(reset_reason); |
| |
| static ssize_t ims_pcu_reset_device(struct device *dev, |
| struct device_attribute *dattr, |
| const char *buf, size_t count) |
| { |
| static const u8 reset_byte = 1; |
| struct usb_interface *intf = to_usb_interface(dev); |
| struct ims_pcu *pcu = usb_get_intfdata(intf); |
| int value; |
| int error; |
| |
| error = kstrtoint(buf, 0, &value); |
| if (error) |
| return error; |
| |
| if (value != 1) |
| return -EINVAL; |
| |
| dev_info(pcu->dev, "Attempting to reset device\n"); |
| |
| error = ims_pcu_execute_command(pcu, PCU_RESET, &reset_byte, 1); |
| if (error) { |
| dev_info(pcu->dev, |
| "Failed to reset device, error: %d\n", |
| error); |
| return error; |
| } |
| |
| return count; |
| } |
| |
| static DEVICE_ATTR(reset_device, S_IWUSR, NULL, ims_pcu_reset_device); |
| |
| static ssize_t ims_pcu_update_firmware_store(struct device *dev, |
| struct device_attribute *dattr, |
| const char *buf, size_t count) |
| { |
| struct usb_interface *intf = to_usb_interface(dev); |
| struct ims_pcu *pcu = usb_get_intfdata(intf); |
| const struct firmware *fw = NULL; |
| int value; |
| int error; |
| |
| error = kstrtoint(buf, 0, &value); |
| if (error) |
| return error; |
| |
| if (value != 1) |
| return -EINVAL; |
| |
| error = mutex_lock_interruptible(&pcu->cmd_mutex); |
| if (error) |
| return error; |
| |
| error = request_ihex_firmware(&fw, IMS_PCU_FIRMWARE_NAME, pcu->dev); |
| if (error) { |
| dev_err(pcu->dev, "Failed to request firmware %s, error: %d\n", |
| IMS_PCU_FIRMWARE_NAME, error); |
| goto out; |
| } |
| |
| /* |
| * If we are already in bootloader mode we can proceed with |
| * flashing the firmware. |
| * |
| * If we are in application mode, then we need to switch into |
| * bootloader mode, which will cause the device to disconnect |
| * and reconnect as different device. |
| */ |
| if (pcu->bootloader_mode) |
| error = ims_pcu_handle_firmware_update(pcu, fw); |
| else |
| error = ims_pcu_switch_to_bootloader(pcu); |
| |
| release_firmware(fw); |
| |
| out: |
| mutex_unlock(&pcu->cmd_mutex); |
| return error ?: count; |
| } |
| |
| static DEVICE_ATTR(update_firmware, S_IWUSR, |
| NULL, ims_pcu_update_firmware_store); |
| |
| static ssize_t |
| ims_pcu_update_firmware_status_show(struct device *dev, |
| struct device_attribute *dattr, |
| char *buf) |
| { |
| struct usb_interface *intf = to_usb_interface(dev); |
| struct ims_pcu *pcu = usb_get_intfdata(intf); |
| |
| return scnprintf(buf, PAGE_SIZE, "%d\n", pcu->update_firmware_status); |
| } |
| |
| static DEVICE_ATTR(update_firmware_status, S_IRUGO, |
| ims_pcu_update_firmware_status_show, NULL); |
| |
| static struct attribute *ims_pcu_attrs[] = { |
| &ims_pcu_attr_part_number.dattr.attr, |
| &ims_pcu_attr_serial_number.dattr.attr, |
| &ims_pcu_attr_date_of_manufacturing.dattr.attr, |
| &ims_pcu_attr_fw_version.dattr.attr, |
| &ims_pcu_attr_bl_version.dattr.attr, |
| &ims_pcu_attr_reset_reason.dattr.attr, |
| &dev_attr_reset_device.attr, |
| &dev_attr_update_firmware.attr, |
| &dev_attr_update_firmware_status.attr, |
| NULL |
| }; |
| |
| static umode_t ims_pcu_is_attr_visible(struct kobject *kobj, |
| struct attribute *attr, int n) |
| { |
| struct device *dev = container_of(kobj, struct device, kobj); |
| struct usb_interface *intf = to_usb_interface(dev); |
| struct ims_pcu *pcu = usb_get_intfdata(intf); |
| umode_t mode = attr->mode; |
| |
| if (pcu->bootloader_mode) { |
| if (attr != &dev_attr_update_firmware_status.attr && |
| attr != &dev_attr_update_firmware.attr && |
| attr != &dev_attr_reset_device.attr) { |
| mode = 0; |
| } |
| } else { |
| if (attr == &dev_attr_update_firmware_status.attr) |
| mode = 0; |
| } |
| |
| return mode; |
| } |
| |
| static const struct attribute_group ims_pcu_attr_group = { |
| .is_visible = ims_pcu_is_attr_visible, |
| .attrs = ims_pcu_attrs, |
| }; |
| |
| /* Support for a separate OFN attribute group */ |
| |
| #define OFN_REG_RESULT_OFFSET 2 |
| |
| static int ims_pcu_read_ofn_config(struct ims_pcu *pcu, u8 addr, u8 *data) |
| { |
| int error; |
| s16 result; |
| |
| error = ims_pcu_execute_command(pcu, OFN_GET_CONFIG, |
| &addr, sizeof(addr)); |
| if (error) |
| return error; |
| |
| result = (s16)get_unaligned_le16(pcu->cmd_buf + OFN_REG_RESULT_OFFSET); |
| if (result < 0) |
| return -EIO; |
| |
| /* We only need LSB */ |
| *data = pcu->cmd_buf[OFN_REG_RESULT_OFFSET]; |
| return 0; |
| } |
| |
| static int ims_pcu_write_ofn_config(struct ims_pcu *pcu, u8 addr, u8 data) |
| { |
| u8 buffer[] = { addr, data }; |
| int error; |
| s16 result; |
| |
| error = ims_pcu_execute_command(pcu, OFN_SET_CONFIG, |
| &buffer, sizeof(buffer)); |
| if (error) |
| return error; |
| |
| result = (s16)get_unaligned_le16(pcu->cmd_buf + OFN_REG_RESULT_OFFSET); |
| if (result < 0) |
| return -EIO; |
| |
| return 0; |
| } |
| |
| static ssize_t ims_pcu_ofn_reg_data_show(struct device *dev, |
| struct device_attribute *dattr, |
| char *buf) |
| { |
| struct usb_interface *intf = to_usb_interface(dev); |
| struct ims_pcu *pcu = usb_get_intfdata(intf); |
| int error; |
| u8 data; |
| |
| mutex_lock(&pcu->cmd_mutex); |
| error = ims_pcu_read_ofn_config(pcu, pcu->ofn_reg_addr, &data); |
| mutex_unlock(&pcu->cmd_mutex); |
| |
| if (error) |
| return error; |
| |
| return scnprintf(buf, PAGE_SIZE, "%x\n", data); |
| } |
| |
| static ssize_t ims_pcu_ofn_reg_data_store(struct device *dev, |
| struct device_attribute *dattr, |
| const char *buf, size_t count) |
| { |
| struct usb_interface *intf = to_usb_interface(dev); |
| struct ims_pcu *pcu = usb_get_intfdata(intf); |
| int error; |
| u8 value; |
| |
| error = kstrtou8(buf, 0, &value); |
| if (error) |
| return error; |
| |
| mutex_lock(&pcu->cmd_mutex); |
| error = ims_pcu_write_ofn_config(pcu, pcu->ofn_reg_addr, value); |
| mutex_unlock(&pcu->cmd_mutex); |
| |
| return error ?: count; |
| } |
| |
| static DEVICE_ATTR(reg_data, S_IRUGO | S_IWUSR, |
| ims_pcu_ofn_reg_data_show, ims_pcu_ofn_reg_data_store); |
| |
| static ssize_t ims_pcu_ofn_reg_addr_show(struct device *dev, |
| struct device_attribute *dattr, |
| char *buf) |
| { |
| struct usb_interface *intf = to_usb_interface(dev); |
| struct ims_pcu *pcu = usb_get_intfdata(intf); |
| int error; |
| |
| mutex_lock(&pcu->cmd_mutex); |
| error = scnprintf(buf, PAGE_SIZE, "%x\n", pcu->ofn_reg_addr); |
| mutex_unlock(&pcu->cmd_mutex); |
| |
| return error; |
| } |
| |
| static ssize_t ims_pcu_ofn_reg_addr_store(struct device *dev, |
| struct device_attribute *dattr, |
| const char *buf, size_t count) |
| { |
| struct usb_interface *intf = to_usb_interface(dev); |
| struct ims_pcu *pcu = usb_get_intfdata(intf); |
| int error; |
| u8 value; |
| |
| error = kstrtou8(buf, 0, &value); |
| if (error) |
| return error; |
| |
| mutex_lock(&pcu->cmd_mutex); |
| pcu->ofn_reg_addr = value; |
| mutex_unlock(&pcu->cmd_mutex); |
| |
| return count; |
| } |
| |
| static DEVICE_ATTR(reg_addr, S_IRUGO | S_IWUSR, |
| ims_pcu_ofn_reg_addr_show, ims_pcu_ofn_reg_addr_store); |
| |
| struct ims_pcu_ofn_bit_attribute { |
| struct device_attribute dattr; |
| u8 addr; |
| u8 nr; |
| }; |
| |
| static ssize_t ims_pcu_ofn_bit_show(struct device *dev, |
| struct device_attribute *dattr, |
| char *buf) |
| { |
| struct usb_interface *intf = to_usb_interface(dev); |
| struct ims_pcu *pcu = usb_get_intfdata(intf); |
| struct ims_pcu_ofn_bit_attribute *attr = |
| container_of(dattr, struct ims_pcu_ofn_bit_attribute, dattr); |
| int error; |
| u8 data; |
| |
| mutex_lock(&pcu->cmd_mutex); |
| error = ims_pcu_read_ofn_config(pcu, attr->addr, &data); |
| mutex_unlock(&pcu->cmd_mutex); |
| |
| if (error) |
| return error; |
| |
| return scnprintf(buf, PAGE_SIZE, "%d\n", !!(data & (1 << attr->nr))); |
| } |
| |
| static ssize_t ims_pcu_ofn_bit_store(struct device *dev, |
| struct device_attribute *dattr, |
| const char *buf, size_t count) |
| { |
| struct usb_interface *intf = to_usb_interface(dev); |
| struct ims_pcu *pcu = usb_get_intfdata(intf); |
| struct ims_pcu_ofn_bit_attribute *attr = |
| container_of(dattr, struct ims_pcu_ofn_bit_attribute, dattr); |
| int error; |
| int value; |
| u8 data; |
| |
| error = kstrtoint(buf, 0, &value); |
| if (error) |
| return error; |
| |
| if (value > 1) |
| return -EINVAL; |
| |
| mutex_lock(&pcu->cmd_mutex); |
| |
| error = ims_pcu_read_ofn_config(pcu, attr->addr, &data); |
| if (!error) { |
| if (value) |
| data |= 1U << attr->nr; |
| else |
| data &= ~(1U << attr->nr); |
| |
| error = ims_pcu_write_ofn_config(pcu, attr->addr, data); |
| } |
| |
| mutex_unlock(&pcu->cmd_mutex); |
| |
| return error ?: count; |
| } |
| |
| #define IMS_PCU_OFN_BIT_ATTR(_field, _addr, _nr) \ |
| struct ims_pcu_ofn_bit_attribute ims_pcu_ofn_attr_##_field = { \ |
| .dattr = __ATTR(_field, S_IWUSR | S_IRUGO, \ |
| ims_pcu_ofn_bit_show, ims_pcu_ofn_bit_store), \ |
| .addr = _addr, \ |
| .nr = _nr, \ |
| } |
| |
| static IMS_PCU_OFN_BIT_ATTR(engine_enable, 0x60, 7); |
| static IMS_PCU_OFN_BIT_ATTR(speed_enable, 0x60, 6); |
| static IMS_PCU_OFN_BIT_ATTR(assert_enable, 0x60, 5); |
| static IMS_PCU_OFN_BIT_ATTR(xyquant_enable, 0x60, 4); |
| static IMS_PCU_OFN_BIT_ATTR(xyscale_enable, 0x60, 1); |
| |
| static IMS_PCU_OFN_BIT_ATTR(scale_x2, 0x63, 6); |
| static IMS_PCU_OFN_BIT_ATTR(scale_y2, 0x63, 7); |
| |
| static struct attribute *ims_pcu_ofn_attrs[] = { |
| &dev_attr_reg_data.attr, |
| &dev_attr_reg_addr.attr, |
| &ims_pcu_ofn_attr_engine_enable.dattr.attr, |
| &ims_pcu_ofn_attr_speed_enable.dattr.attr, |
| &ims_pcu_ofn_attr_assert_enable.dattr.attr, |
| &ims_pcu_ofn_attr_xyquant_enable.dattr.attr, |
| &ims_pcu_ofn_attr_xyscale_enable.dattr.attr, |
| &ims_pcu_ofn_attr_scale_x2.dattr.attr, |
| &ims_pcu_ofn_attr_scale_y2.dattr.attr, |
| NULL |
| }; |
| |
| static const struct attribute_group ims_pcu_ofn_attr_group = { |
| .name = "ofn", |
| .attrs = ims_pcu_ofn_attrs, |
| }; |
| |
| static void ims_pcu_irq(struct urb *urb) |
| { |
| struct ims_pcu *pcu = urb->context; |
| int retval, status; |
| |
| status = urb->status; |
| |
| switch (status) { |
| case 0: |
| /* success */ |
| break; |
| case -ECONNRESET: |
| case -ENOENT: |
| case -ESHUTDOWN: |
| /* this urb is terminated, clean up */ |
| dev_dbg(pcu->dev, "%s - urb shutting down with status: %d\n", |
| __func__, status); |
| return; |
| default: |
| dev_dbg(pcu->dev, "%s - nonzero urb status received: %d\n", |
| __func__, status); |
| goto exit; |
| } |
| |
| dev_dbg(pcu->dev, "%s: received %d: %*ph\n", __func__, |
| urb->actual_length, urb->actual_length, pcu->urb_in_buf); |
| |
| if (urb == pcu->urb_in) |
| ims_pcu_process_data(pcu, urb); |
| |
| exit: |
| retval = usb_submit_urb(urb, GFP_ATOMIC); |
| if (retval && retval != -ENODEV) |
| dev_err(pcu->dev, "%s - usb_submit_urb failed with result %d\n", |
| __func__, retval); |
| } |
| |
| static int ims_pcu_buffers_alloc(struct ims_pcu *pcu) |
| { |
| int error; |
| |
| pcu->urb_in_buf = usb_alloc_coherent(pcu->udev, pcu->max_in_size, |
| GFP_KERNEL, &pcu->read_dma); |
| if (!pcu->urb_in_buf) { |
| dev_err(pcu->dev, |
| "Failed to allocate memory for read buffer\n"); |
| return -ENOMEM; |
| } |
| |
| pcu->urb_in = usb_alloc_urb(0, GFP_KERNEL); |
| if (!pcu->urb_in) { |
| dev_err(pcu->dev, "Failed to allocate input URB\n"); |
| error = -ENOMEM; |
| goto err_free_urb_in_buf; |
| } |
| |
| pcu->urb_in->transfer_flags |= URB_NO_TRANSFER_DMA_MAP; |
| pcu->urb_in->transfer_dma = pcu->read_dma; |
| |
| usb_fill_bulk_urb(pcu->urb_in, pcu->udev, |
| usb_rcvbulkpipe(pcu->udev, |
| pcu->ep_in->bEndpointAddress), |
| pcu->urb_in_buf, pcu->max_in_size, |
| ims_pcu_irq, pcu); |
| |
| /* |
| * We are using usb_bulk_msg() for sending so there is no point |
| * in allocating memory with usb_alloc_coherent(). |
| */ |
| pcu->urb_out_buf = kmalloc(pcu->max_out_size, GFP_KERNEL); |
| if (!pcu->urb_out_buf) { |
| dev_err(pcu->dev, "Failed to allocate memory for write buffer\n"); |
| error = -ENOMEM; |
| goto err_free_in_urb; |
| } |
| |
| pcu->urb_ctrl_buf = usb_alloc_coherent(pcu->udev, pcu->max_ctrl_size, |
| GFP_KERNEL, &pcu->ctrl_dma); |
| if (!pcu->urb_ctrl_buf) { |
| dev_err(pcu->dev, |
| "Failed to allocate memory for read buffer\n"); |
| error = -ENOMEM; |
| goto err_free_urb_out_buf; |
| } |
| |
| pcu->urb_ctrl = usb_alloc_urb(0, GFP_KERNEL); |
| if (!pcu->urb_ctrl) { |
| dev_err(pcu->dev, "Failed to allocate input URB\n"); |
| error = -ENOMEM; |
| goto err_free_urb_ctrl_buf; |
| } |
| |
| pcu->urb_ctrl->transfer_flags |= URB_NO_TRANSFER_DMA_MAP; |
| pcu->urb_ctrl->transfer_dma = pcu->ctrl_dma; |
| |
| usb_fill_int_urb(pcu->urb_ctrl, pcu->udev, |
| usb_rcvintpipe(pcu->udev, |
| pcu->ep_ctrl->bEndpointAddress), |
| pcu->urb_ctrl_buf, pcu->max_ctrl_size, |
| ims_pcu_irq, pcu, pcu->ep_ctrl->bInterval); |
| |
| return 0; |
| |
| err_free_urb_ctrl_buf: |
| usb_free_coherent(pcu->udev, pcu->max_ctrl_size, |
| pcu->urb_ctrl_buf, pcu->ctrl_dma); |
| err_free_urb_out_buf: |
| kfree(pcu->urb_out_buf); |
| err_free_in_urb: |
| usb_free_urb(pcu->urb_in); |
| err_free_urb_in_buf: |
| usb_free_coherent(pcu->udev, pcu->max_in_size, |
| pcu->urb_in_buf, pcu->read_dma); |
| return error; |
| } |
| |
| static void ims_pcu_buffers_free(struct ims_pcu *pcu) |
| { |
| usb_kill_urb(pcu->urb_in); |
| usb_free_urb(pcu->urb_in); |
| |
| usb_free_coherent(pcu->udev, pcu->max_out_size, |
| pcu->urb_in_buf, pcu->read_dma); |
| |
| kfree(pcu->urb_out_buf); |
| |
| usb_kill_urb(pcu->urb_ctrl); |
| usb_free_urb(pcu->urb_ctrl); |
| |
| usb_free_coherent(pcu->udev, pcu->max_ctrl_size, |
| pcu->urb_ctrl_buf, pcu->ctrl_dma); |
| } |
| |
| static const struct usb_cdc_union_desc * |
| ims_pcu_get_cdc_union_desc(struct usb_interface *intf) |
| { |
| const void *buf = intf->altsetting->extra; |
| size_t buflen = intf->altsetting->extralen; |
| struct usb_cdc_union_desc *union_desc; |
| |
| if (!buf) { |
| dev_err(&intf->dev, "Missing descriptor data\n"); |
| return NULL; |
| } |
| |
| if (!buflen) { |
| dev_err(&intf->dev, "Zero length descriptor\n"); |
| return NULL; |
| } |
| |
| while (buflen >= sizeof(*union_desc)) { |
| union_desc = (struct usb_cdc_union_desc *)buf; |
| |
| if (union_desc->bLength > buflen) { |
| dev_err(&intf->dev, "Too large descriptor\n"); |
| return NULL; |
| } |
| |
| if (union_desc->bDescriptorType == USB_DT_CS_INTERFACE && |
| union_desc->bDescriptorSubType == USB_CDC_UNION_TYPE) { |
| dev_dbg(&intf->dev, "Found union header\n"); |
| |
| if (union_desc->bLength >= sizeof(*union_desc)) |
| return union_desc; |
| |
| dev_err(&intf->dev, |
| "Union descriptor too short (%d vs %zd)\n", |
| union_desc->bLength, sizeof(*union_desc)); |
| return NULL; |
| } |
| |
| buflen -= union_desc->bLength; |
| buf += union_desc->bLength; |
| } |
| |
| dev_err(&intf->dev, "Missing CDC union descriptor\n"); |
| return NULL; |
| } |
| |
| static int ims_pcu_parse_cdc_data(struct usb_interface *intf, struct ims_pcu *pcu) |
| { |
| const struct usb_cdc_union_desc *union_desc; |
| struct usb_host_interface *alt; |
| |
| union_desc = ims_pcu_get_cdc_union_desc(intf); |
| if (!union_desc) |
| return -EINVAL; |
| |
| pcu->ctrl_intf = usb_ifnum_to_if(pcu->udev, |
| union_desc->bMasterInterface0); |
| if (!pcu->ctrl_intf) |
| return -EINVAL; |
| |
| alt = pcu->ctrl_intf->cur_altsetting; |
| |
| if (alt->desc.bNumEndpoints < 1) |
| return -ENODEV; |
| |
| pcu->ep_ctrl = &alt->endpoint[0].desc; |
| pcu->max_ctrl_size = usb_endpoint_maxp(pcu->ep_ctrl); |
| |
| pcu->data_intf = usb_ifnum_to_if(pcu->udev, |
| union_desc->bSlaveInterface0); |
| if (!pcu->data_intf) |
| return -EINVAL; |
| |
| alt = pcu->data_intf->cur_altsetting; |
| if (alt->desc.bNumEndpoints != 2) { |
| dev_err(pcu->dev, |
| "Incorrect number of endpoints on data interface (%d)\n", |
| alt->desc.bNumEndpoints); |
| return -EINVAL; |
| } |
| |
| pcu->ep_out = &alt->endpoint[0].desc; |
| if (!usb_endpoint_is_bulk_out(pcu->ep_out)) { |
| dev_err(pcu->dev, |
| "First endpoint on data interface is not BULK OUT\n"); |
| return -EINVAL; |
| } |
| |
| pcu->max_out_size = usb_endpoint_maxp(pcu->ep_out); |
| if (pcu->max_out_size < 8) { |
| dev_err(pcu->dev, |
| "Max OUT packet size is too small (%zd)\n", |
| pcu->max_out_size); |
| return -EINVAL; |
| } |
| |
| pcu->ep_in = &alt->endpoint[1].desc; |
| if (!usb_endpoint_is_bulk_in(pcu->ep_in)) { |
| dev_err(pcu->dev, |
| "Second endpoint on data interface is not BULK IN\n"); |
| return -EINVAL; |
| } |
| |
| pcu->max_in_size = usb_endpoint_maxp(pcu->ep_in); |
| if (pcu->max_in_size < 8) { |
| dev_err(pcu->dev, |
| "Max IN packet size is too small (%zd)\n", |
| pcu->max_in_size); |
| return -EINVAL; |
| } |
| |
| return 0; |
| } |
| |
| static int ims_pcu_start_io(struct ims_pcu *pcu) |
| { |
| int error; |
| |
| error = usb_submit_urb(pcu->urb_ctrl, GFP_KERNEL); |
| if (error) { |
| dev_err(pcu->dev, |
| "Failed to start control IO - usb_submit_urb failed with result: %d\n", |
| error); |
| return -EIO; |
| } |
| |
| error = usb_submit_urb(pcu->urb_in, GFP_KERNEL); |
| if (error) { |
| dev_err(pcu->dev, |
| "Failed to start IO - usb_submit_urb failed with result: %d\n", |
| error); |
| usb_kill_urb(pcu->urb_ctrl); |
| return -EIO; |
| } |
| |
| return 0; |
| } |
| |
| static void ims_pcu_stop_io(struct ims_pcu *pcu) |
| { |
| usb_kill_urb(pcu->urb_in); |
| usb_kill_urb(pcu->urb_ctrl); |
| } |
| |
| static int ims_pcu_line_setup(struct ims_pcu *pcu) |
| { |
| struct usb_host_interface *interface = pcu->ctrl_intf->cur_altsetting; |
| struct usb_cdc_line_coding *line = (void *)pcu->cmd_buf; |
| int error; |
| |
| memset(line, 0, sizeof(*line)); |
| line->dwDTERate = cpu_to_le32(57600); |
| line->bDataBits = 8; |
| |
| error = usb_control_msg(pcu->udev, usb_sndctrlpipe(pcu->udev, 0), |
| USB_CDC_REQ_SET_LINE_CODING, |
| USB_TYPE_CLASS | USB_RECIP_INTERFACE, |
| 0, interface->desc.bInterfaceNumber, |
| line, sizeof(struct usb_cdc_line_coding), |
| 5000); |
| if (error < 0) { |
| dev_err(pcu->dev, "Failed to set line coding, error: %d\n", |
| error); |
| return error; |
| } |
| |
| error = usb_control_msg(pcu->udev, usb_sndctrlpipe(pcu->udev, 0), |
| USB_CDC_REQ_SET_CONTROL_LINE_STATE, |
| USB_TYPE_CLASS | USB_RECIP_INTERFACE, |
| 0x03, interface->desc.bInterfaceNumber, |
| NULL, 0, 5000); |
| if (error < 0) { |
| dev_err(pcu->dev, "Failed to set line state, error: %d\n", |
| error); |
| return error; |
| } |
| |
| return 0; |
| } |
| |
| static int ims_pcu_get_device_info(struct ims_pcu *pcu) |
| { |
| int error; |
| |
| error = ims_pcu_get_info(pcu); |
| if (error) |
| return error; |
| |
| error = ims_pcu_execute_query(pcu, GET_FW_VERSION); |
| if (error) { |
| dev_err(pcu->dev, |
| "GET_FW_VERSION command failed, error: %d\n", error); |
| return error; |
| } |
| |
| snprintf(pcu->fw_version, sizeof(pcu->fw_version), |
| "%02d%02d%02d%02d.%c%c", |
| pcu->cmd_buf[2], pcu->cmd_buf[3], pcu->cmd_buf[4], pcu->cmd_buf[5], |
| pcu->cmd_buf[6], pcu->cmd_buf[7]); |
| |
| error = ims_pcu_execute_query(pcu, GET_BL_VERSION); |
| if (error) { |
| dev_err(pcu->dev, |
| "GET_BL_VERSION command failed, error: %d\n", error); |
| return error; |
| } |
| |
| snprintf(pcu->bl_version, sizeof(pcu->bl_version), |
| "%02d%02d%02d%02d.%c%c", |
| pcu->cmd_buf[2], pcu->cmd_buf[3], pcu->cmd_buf[4], pcu->cmd_buf[5], |
| pcu->cmd_buf[6], pcu->cmd_buf[7]); |
| |
| error = ims_pcu_execute_query(pcu, RESET_REASON); |
| if (error) { |
| dev_err(pcu->dev, |
| "RESET_REASON command failed, error: %d\n", error); |
| return error; |
| } |
| |
| snprintf(pcu->reset_reason, sizeof(pcu->reset_reason), |
| "%02x", pcu->cmd_buf[IMS_PCU_DATA_OFFSET]); |
| |
| dev_dbg(pcu->dev, |
| "P/N: %s, MD: %s, S/N: %s, FW: %s, BL: %s, RR: %s\n", |
| pcu->part_number, |
| pcu->date_of_manufacturing, |
| pcu->serial_number, |
| pcu->fw_version, |
| pcu->bl_version, |
| pcu->reset_reason); |
| |
| return 0; |
| } |
| |
| static int ims_pcu_identify_type(struct ims_pcu *pcu, u8 *device_id) |
| { |
| int error; |
| |
| error = ims_pcu_execute_query(pcu, GET_DEVICE_ID); |
| if (error) { |
| dev_err(pcu->dev, |
| "GET_DEVICE_ID command failed, error: %d\n", error); |
| return error; |
| } |
| |
| *device_id = pcu->cmd_buf[IMS_PCU_DATA_OFFSET]; |
| dev_dbg(pcu->dev, "Detected device ID: %d\n", *device_id); |
| |
| return 0; |
| } |
| |
| static int ims_pcu_init_application_mode(struct ims_pcu *pcu) |
| { |
| static atomic_t device_no = ATOMIC_INIT(-1); |
| |
| const struct ims_pcu_device_info *info; |
| int error; |
| |
| error = ims_pcu_get_device_info(pcu); |
| if (error) { |
| /* Device does not respond to basic queries, hopeless */ |
| return error; |
| } |
| |
| error = ims_pcu_identify_type(pcu, &pcu->device_id); |
| if (error) { |
| dev_err(pcu->dev, |
| "Failed to identify device, error: %d\n", error); |
| /* |
| * Do not signal error, but do not create input nor |
| * backlight devices either, let userspace figure this |
| * out (flash a new firmware?). |
| */ |
| return 0; |
| } |
| |
| if (pcu->device_id >= ARRAY_SIZE(ims_pcu_device_info) || |
| !ims_pcu_device_info[pcu->device_id].keymap) { |
| dev_err(pcu->dev, "Device ID %d is not valid\n", pcu->device_id); |
| /* Same as above, punt to userspace */ |
| return 0; |
| } |
| |
| /* Device appears to be operable, complete initialization */ |
| pcu->device_no = atomic_inc_return(&device_no); |
| |
| /* |
| * PCU-B devices, both GEN_1 and GEN_2 do not have OFN sensor |
| */ |
| if (pcu->device_id != IMS_PCU_PCU_B_DEVICE_ID) { |
| error = sysfs_create_group(&pcu->dev->kobj, |
| &ims_pcu_ofn_attr_group); |
| if (error) |
| return error; |
| } |
| |
| error = ims_pcu_setup_backlight(pcu); |
| if (error) |
| return error; |
| |
| info = &ims_pcu_device_info[pcu->device_id]; |
| error = ims_pcu_setup_buttons(pcu, info->keymap, info->keymap_len); |
| if (error) |
| goto err_destroy_backlight; |
| |
| if (info->has_gamepad) { |
| error = ims_pcu_setup_gamepad(pcu); |
| if (error) |
| goto err_destroy_buttons; |
| } |
| |
| pcu->setup_complete = true; |
| |
| return 0; |
| |
| err_destroy_buttons: |
| ims_pcu_destroy_buttons(pcu); |
| err_destroy_backlight: |
| ims_pcu_destroy_backlight(pcu); |
| return error; |
| } |
| |
| static void ims_pcu_destroy_application_mode(struct ims_pcu *pcu) |
| { |
| if (pcu->setup_complete) { |
| pcu->setup_complete = false; |
| mb(); /* make sure flag setting is not reordered */ |
| |
| if (pcu->gamepad) |
| ims_pcu_destroy_gamepad(pcu); |
| ims_pcu_destroy_buttons(pcu); |
| ims_pcu_destroy_backlight(pcu); |
| |
| if (pcu->device_id != IMS_PCU_PCU_B_DEVICE_ID) |
| sysfs_remove_group(&pcu->dev->kobj, |
| &ims_pcu_ofn_attr_group); |
| } |
| } |
| |
| static int ims_pcu_init_bootloader_mode(struct ims_pcu *pcu) |
| { |
| int error; |
| |
| error = ims_pcu_execute_bl_command(pcu, QUERY_DEVICE, NULL, 0, |
| IMS_PCU_CMD_RESPONSE_TIMEOUT); |
| if (error) { |
| dev_err(pcu->dev, "Bootloader does not respond, aborting\n"); |
| return error; |
| } |
| |
| pcu->fw_start_addr = |
| get_unaligned_le32(&pcu->cmd_buf[IMS_PCU_DATA_OFFSET + 11]); |
| pcu->fw_end_addr = |
| get_unaligned_le32(&pcu->cmd_buf[IMS_PCU_DATA_OFFSET + 15]); |
| |
| dev_info(pcu->dev, |
| "Device is in bootloader mode (addr 0x%08x-0x%08x), requesting firmware\n", |
| pcu->fw_start_addr, pcu->fw_end_addr); |
| |
| error = request_firmware_nowait(THIS_MODULE, true, |
| IMS_PCU_FIRMWARE_NAME, |
| pcu->dev, GFP_KERNEL, pcu, |
| ims_pcu_process_async_firmware); |
| if (error) { |
| /* This error is not fatal, let userspace have another chance */ |
| complete(&pcu->async_firmware_done); |
| } |
| |
| return 0; |
| } |
| |
| static void ims_pcu_destroy_bootloader_mode(struct ims_pcu *pcu) |
| { |
| /* Make sure our initial firmware request has completed */ |
| wait_for_completion(&pcu->async_firmware_done); |
| } |
| |
| #define IMS_PCU_APPLICATION_MODE 0 |
| #define IMS_PCU_BOOTLOADER_MODE 1 |
| |
| static struct usb_driver ims_pcu_driver; |
| |
| static int ims_pcu_probe(struct usb_interface *intf, |
| const struct usb_device_id *id) |
| { |
| struct usb_device *udev = interface_to_usbdev(intf); |
| struct ims_pcu *pcu; |
| int error; |
| |
| pcu = kzalloc(sizeof(struct ims_pcu), GFP_KERNEL); |
| if (!pcu) |
| return -ENOMEM; |
| |
| pcu->dev = &intf->dev; |
| pcu->udev = udev; |
| pcu->bootloader_mode = id->driver_info == IMS_PCU_BOOTLOADER_MODE; |
| mutex_init(&pcu->cmd_mutex); |
| init_completion(&pcu->cmd_done); |
| init_completion(&pcu->async_firmware_done); |
| |
| error = ims_pcu_parse_cdc_data(intf, pcu); |
| if (error) |
| goto err_free_mem; |
| |
| error = usb_driver_claim_interface(&ims_pcu_driver, |
| pcu->data_intf, pcu); |
| if (error) { |
| dev_err(&intf->dev, |
| "Unable to claim corresponding data interface: %d\n", |
| error); |
| goto err_free_mem; |
| } |
| |
| usb_set_intfdata(pcu->ctrl_intf, pcu); |
| usb_set_intfdata(pcu->data_intf, pcu); |
| |
| error = ims_pcu_buffers_alloc(pcu); |
| if (error) |
| goto err_unclaim_intf; |
| |
| error = ims_pcu_start_io(pcu); |
| if (error) |
| goto err_free_buffers; |
| |
| error = ims_pcu_line_setup(pcu); |
| if (error) |
| goto err_stop_io; |
| |
| error = sysfs_create_group(&intf->dev.kobj, &ims_pcu_attr_group); |
| if (error) |
| goto err_stop_io; |
| |
| error = pcu->bootloader_mode ? |
| ims_pcu_init_bootloader_mode(pcu) : |
| ims_pcu_init_application_mode(pcu); |
| if (error) |
| goto err_remove_sysfs; |
| |
| return 0; |
| |
| err_remove_sysfs: |
| sysfs_remove_group(&intf->dev.kobj, &ims_pcu_attr_group); |
| err_stop_io: |
| ims_pcu_stop_io(pcu); |
| err_free_buffers: |
| ims_pcu_buffers_free(pcu); |
| err_unclaim_intf: |
| usb_driver_release_interface(&ims_pcu_driver, pcu->data_intf); |
| err_free_mem: |
| kfree(pcu); |
| return error; |
| } |
| |
| static void ims_pcu_disconnect(struct usb_interface *intf) |
| { |
| struct ims_pcu *pcu = usb_get_intfdata(intf); |
| struct usb_host_interface *alt = intf->cur_altsetting; |
| |
| usb_set_intfdata(intf, NULL); |
| |
| /* |
| * See if we are dealing with control or data interface. The cleanup |
| * happens when we unbind primary (control) interface. |
| */ |
| if (alt->desc.bInterfaceClass != USB_CLASS_COMM) |
| return; |
| |
| sysfs_remove_group(&intf->dev.kobj, &ims_pcu_attr_group); |
| |
| ims_pcu_stop_io(pcu); |
| |
| if (pcu->bootloader_mode) |
| ims_pcu_destroy_bootloader_mode(pcu); |
| else |
| ims_pcu_destroy_application_mode(pcu); |
| |
| ims_pcu_buffers_free(pcu); |
| kfree(pcu); |
| } |
| |
| #ifdef CONFIG_PM |
| static int ims_pcu_suspend(struct usb_interface *intf, |
| pm_message_t message) |
| { |
| struct ims_pcu *pcu = usb_get_intfdata(intf); |
| struct usb_host_interface *alt = intf->cur_altsetting; |
| |
| if (alt->desc.bInterfaceClass == USB_CLASS_COMM) |
| ims_pcu_stop_io(pcu); |
| |
| return 0; |
| } |
| |
| static int ims_pcu_resume(struct usb_interface *intf) |
| { |
| struct ims_pcu *pcu = usb_get_intfdata(intf); |
| struct usb_host_interface *alt = intf->cur_altsetting; |
| int retval = 0; |
| |
| if (alt->desc.bInterfaceClass == USB_CLASS_COMM) { |
| retval = ims_pcu_start_io(pcu); |
| if (retval == 0) |
| retval = ims_pcu_line_setup(pcu); |
| } |
| |
| return retval; |
| } |
| #endif |
| |
| static const struct usb_device_id ims_pcu_id_table[] = { |
| { |
| USB_DEVICE_AND_INTERFACE_INFO(0x04d8, 0x0082, |
| USB_CLASS_COMM, |
| USB_CDC_SUBCLASS_ACM, |
| USB_CDC_ACM_PROTO_AT_V25TER), |
| .driver_info = IMS_PCU_APPLICATION_MODE, |
| }, |
| { |
| USB_DEVICE_AND_INTERFACE_INFO(0x04d8, 0x0083, |
| USB_CLASS_COMM, |
| USB_CDC_SUBCLASS_ACM, |
| USB_CDC_ACM_PROTO_AT_V25TER), |
| .driver_info = IMS_PCU_BOOTLOADER_MODE, |
| }, |
| { } |
| }; |
| |
| static struct usb_driver ims_pcu_driver = { |
| .name = "ims_pcu", |
| .id_table = ims_pcu_id_table, |
| .probe = ims_pcu_probe, |
| .disconnect = ims_pcu_disconnect, |
| #ifdef CONFIG_PM |
| .suspend = ims_pcu_suspend, |
| .resume = ims_pcu_resume, |
| .reset_resume = ims_pcu_resume, |
| #endif |
| }; |
| |
| module_usb_driver(ims_pcu_driver); |
| |
| MODULE_DESCRIPTION("IMS Passenger Control Unit driver"); |
| MODULE_AUTHOR("Dmitry Torokhov <dmitry.torokhov@gmail.com>"); |
| MODULE_LICENSE("GPL"); |