| What: /sys/class/leds/<led>/device_name | |
| Date: Dec 2017 | |
| KernelVersion: 4.16 | |
| Contact: linux-leds@vger.kernel.org | |
| Description: | |
| Specifies the network device name to monitor. | |
| What: /sys/class/leds/<led>/interval | |
| Date: Dec 2017 | |
| KernelVersion: 4.16 | |
| Contact: linux-leds@vger.kernel.org | |
| Description: | |
| Specifies the duration of the LED blink in milliseconds. | |
| Defaults to 50 ms. | |
| What: /sys/class/leds/<led>/link | |
| Date: Dec 2017 | |
| KernelVersion: 4.16 | |
| Contact: linux-leds@vger.kernel.org | |
| Description: | |
| Signal the link state of the named network device. | |
| If set to 0 (default), the LED's normal state is off. | |
| If set to 1, the LED's normal state reflects the link state | |
| of the named network device. | |
| Setting this value also immediately changes the LED state. | |
| What: /sys/class/leds/<led>/tx | |
| Date: Dec 2017 | |
| KernelVersion: 4.16 | |
| Contact: linux-leds@vger.kernel.org | |
| Description: | |
| Signal transmission of data on the named network device. | |
| If set to 0 (default), the LED will not blink on transmission. | |
| If set to 1, the LED will blink for the milliseconds specified | |
| in interval to signal transmission. | |
| What: /sys/class/leds/<led>/rx | |
| Date: Dec 2017 | |
| KernelVersion: 4.16 | |
| Contact: linux-leds@vger.kernel.org | |
| Description: | |
| Signal reception of data on the named network device. | |
| If set to 0 (default), the LED will not blink on reception. | |
| If set to 1, the LED will blink for the milliseconds specified | |
| in interval to signal reception. |