| # SPDX-License-Identifier: GPL-2.0-only | |
| # | |
| # For a description of the syntax of this configuration file, | |
| # see Documentation/kbuild/kconfig-language.rst. | |
| # | |
| config 64BIT | |
| bool | |
| config 32BIT | |
| bool | |
| config RISCV | |
| def_bool y | |
| # even on 32-bit, physical (and DMA) addresses are > 32-bits | |
| select PHYS_ADDR_T_64BIT | |
| select OF | |
| select OF_EARLY_FLATTREE | |
| select OF_IRQ | |
| select ARCH_HAS_BINFMT_FLAT | |
| select ARCH_WANT_FRAME_POINTERS | |
| select CLONE_BACKWARDS | |
| select COMMON_CLK | |
| select GENERIC_CLOCKEVENTS | |
| select GENERIC_CPU_DEVICES | |
| select GENERIC_IRQ_SHOW | |
| select GENERIC_PCI_IOMAP | |
| select GENERIC_SCHED_CLOCK | |
| select GENERIC_STRNCPY_FROM_USER | |
| select GENERIC_STRNLEN_USER | |
| select GENERIC_SMP_IDLE_THREAD | |
| select GENERIC_ATOMIC64 if !64BIT | |
| select HAVE_ARCH_AUDITSYSCALL | |
| select HAVE_MEMBLOCK_NODE_MAP | |
| select HAVE_DMA_CONTIGUOUS | |
| select HAVE_FUTEX_CMPXCHG if FUTEX | |
| select HAVE_PERF_EVENTS | |
| select HAVE_SYSCALL_TRACEPOINTS | |
| select IRQ_DOMAIN | |
| select SPARSE_IRQ | |
| select SYSCTL_EXCEPTION_TRACE | |
| select HAVE_ARCH_TRACEHOOK | |
| select HAVE_PCI | |
| select MODULES_USE_ELF_RELA if MODULES | |
| select MODULE_SECTIONS if MODULES | |
| select THREAD_INFO_IN_TASK | |
| select PCI_DOMAINS_GENERIC if PCI | |
| select PCI_MSI if PCI | |
| select RISCV_TIMER | |
| select GENERIC_IRQ_MULTI_HANDLER | |
| select ARCH_HAS_PTE_SPECIAL | |
| select ARCH_HAS_MMIOWB | |
| select HAVE_EBPF_JIT if 64BIT | |
| select EDAC_SUPPORT | |
| select ARCH_HAS_GIGANTIC_PAGE | |
| select ARCH_WANT_HUGE_PMD_SHARE if 64BIT | |
| config MMU | |
| def_bool y | |
| config ZONE_DMA32 | |
| bool | |
| default y if 64BIT | |
| config PAGE_OFFSET | |
| hex | |
| default 0xC0000000 if 32BIT && MAXPHYSMEM_2GB | |
| default 0xffffffff80000000 if 64BIT && MAXPHYSMEM_2GB | |
| default 0xffffffe000000000 if 64BIT && MAXPHYSMEM_128GB | |
| config ARCH_WANT_GENERAL_HUGETLB | |
| def_bool y | |
| config SYS_SUPPORTS_HUGETLBFS | |
| def_bool y | |
| config STACKTRACE_SUPPORT | |
| def_bool y | |
| config TRACE_IRQFLAGS_SUPPORT | |
| def_bool y | |
| config GENERIC_BUG | |
| def_bool y | |
| depends on BUG | |
| select GENERIC_BUG_RELATIVE_POINTERS if 64BIT | |
| config GENERIC_BUG_RELATIVE_POINTERS | |
| bool | |
| config GENERIC_CALIBRATE_DELAY | |
| def_bool y | |
| config GENERIC_CSUM | |
| def_bool y | |
| config GENERIC_HWEIGHT | |
| def_bool y | |
| config FIX_EARLYCON_MEM | |
| def_bool y | |
| config PGTABLE_LEVELS | |
| int | |
| default 3 if 64BIT | |
| default 2 | |
| source "arch/riscv/Kconfig.socs" | |
| menu "Platform type" | |
| choice | |
| prompt "Base ISA" | |
| default ARCH_RV64I | |
| help | |
| This selects the base ISA that this kernel will target and must match | |
| the target platform. | |
| config ARCH_RV32I | |
| bool "RV32I" | |
| select 32BIT | |
| select GENERIC_LIB_ASHLDI3 | |
| select GENERIC_LIB_ASHRDI3 | |
| select GENERIC_LIB_LSHRDI3 | |
| select GENERIC_LIB_UCMPDI2 | |
| config ARCH_RV64I | |
| bool "RV64I" | |
| select 64BIT | |
| select ARCH_SUPPORTS_INT128 if GCC_VERSION >= 50000 | |
| select HAVE_FUNCTION_TRACER | |
| select HAVE_FUNCTION_GRAPH_TRACER | |
| select HAVE_FTRACE_MCOUNT_RECORD | |
| select HAVE_DYNAMIC_FTRACE | |
| select HAVE_DYNAMIC_FTRACE_WITH_REGS | |
| select SWIOTLB | |
| endchoice | |
| # We must be able to map all physical memory into the kernel, but the compiler | |
| # is still a bit more efficient when generating code if it's setup in a manner | |
| # such that it can only map 2GiB of memory. | |
| choice | |
| prompt "Kernel Code Model" | |
| default CMODEL_MEDLOW if 32BIT | |
| default CMODEL_MEDANY if 64BIT | |
| config CMODEL_MEDLOW | |
| bool "medium low code model" | |
| config CMODEL_MEDANY | |
| bool "medium any code model" | |
| endchoice | |
| config MODULE_SECTIONS | |
| bool | |
| select HAVE_MOD_ARCH_SPECIFIC | |
| choice | |
| prompt "Maximum Physical Memory" | |
| default MAXPHYSMEM_2GB if 32BIT | |
| default MAXPHYSMEM_2GB if 64BIT && CMODEL_MEDLOW | |
| default MAXPHYSMEM_128GB if 64BIT && CMODEL_MEDANY | |
| config MAXPHYSMEM_2GB | |
| bool "2GiB" | |
| config MAXPHYSMEM_128GB | |
| depends on 64BIT && CMODEL_MEDANY | |
| bool "128GiB" | |
| endchoice | |
| config SMP | |
| bool "Symmetric Multi-Processing" | |
| help | |
| This enables support for systems with more than one CPU. If | |
| you say N here, the kernel will run on single and | |
| multiprocessor machines, but will use only one CPU of a | |
| multiprocessor machine. If you say Y here, the kernel will run | |
| on many, but not all, single processor machines. On a single | |
| processor machine, the kernel will run faster if you say N | |
| here. | |
| If you don't know what to do here, say N. | |
| config NR_CPUS | |
| int "Maximum number of CPUs (2-32)" | |
| range 2 32 | |
| depends on SMP | |
| default "8" | |
| choice | |
| prompt "CPU Tuning" | |
| default TUNE_GENERIC | |
| config TUNE_GENERIC | |
| bool "generic" | |
| endchoice | |
| config RISCV_ISA_C | |
| bool "Emit compressed instructions when building Linux" | |
| default y | |
| help | |
| Adds "C" to the ISA subsets that the toolchain is allowed to emit | |
| when building Linux, which results in compressed instructions in the | |
| Linux binary. | |
| If you don't know what to do here, say Y. | |
| menu "supported PMU type" | |
| depends on PERF_EVENTS | |
| config RISCV_BASE_PMU | |
| bool "Base Performance Monitoring Unit" | |
| def_bool y | |
| help | |
| A base PMU that serves as a reference implementation and has limited | |
| feature of perf. It can run on any RISC-V machines so serves as the | |
| fallback, but this option can also be disable to reduce kernel size. | |
| endmenu | |
| config FPU | |
| bool "FPU support" | |
| default y | |
| help | |
| Say N here if you want to disable all floating-point related procedure | |
| in the kernel. | |
| If you don't know what to do here, say Y. | |
| endmenu | |
| menu "Kernel features" | |
| source "kernel/Kconfig.hz" | |
| endmenu | |
| menu "Boot options" | |
| config CMDLINE | |
| string "Built-in kernel command line" | |
| help | |
| For most platforms, the arguments for the kernel's command line | |
| are provided at run-time, during boot. However, there are cases | |
| where either no arguments are being provided or the provided | |
| arguments are insufficient or even invalid. | |
| When that occurs, it is possible to define a built-in command | |
| line here and choose how the kernel should use it later on. | |
| choice | |
| prompt "Built-in command line usage" if CMDLINE != "" | |
| default CMDLINE_FALLBACK | |
| help | |
| Choose how the kernel will handle the provided built-in command | |
| line. | |
| config CMDLINE_FALLBACK | |
| bool "Use bootloader kernel arguments if available" | |
| help | |
| Use the built-in command line as fallback in case we get nothing | |
| during boot. This is the default behaviour. | |
| config CMDLINE_EXTEND | |
| bool "Extend bootloader kernel arguments" | |
| help | |
| The command-line arguments provided during boot will be | |
| appended to the built-in command line. This is useful in | |
| cases where the provided arguments are insufficient and | |
| you don't want to or cannot modify them. | |
| config CMDLINE_FORCE | |
| bool "Always use the default kernel command string" | |
| help | |
| Always use the built-in command line, even if we get one during | |
| boot. This is useful in case you need to override the provided | |
| command line on systems where you don't have or want control | |
| over it. | |
| endchoice | |
| endmenu | |
| menu "Power management options" | |
| source "kernel/power/Kconfig" | |
| endmenu |