| /* |
| * Copyright 2017 - Vikas MANOCHA <vikas.manocha@st.com> |
| * |
| * This file is dual-licensed: you can use it either under the terms |
| * of the GPL or the X11 license, at your option. Note that this dual |
| * licensing only applies to this file, and not this project as a |
| * whole. |
| * |
| * a) This file is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License as |
| * published by the Free Software Foundation; either version 2 of the |
| * License, or (at your option) any later version. |
| * |
| * This file is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * Or, alternatively, |
| * |
| * b) Permission is hereby granted, free of charge, to any person |
| * obtaining a copy of this software and associated documentation |
| * files (the "Software"), to deal in the Software without |
| * restriction, including without limitation the rights to use, |
| * copy, modify, merge, publish, distribute, sublicense, and/or |
| * sell copies of the Software, and to permit persons to whom the |
| * Software is furnished to do so, subject to the following |
| * conditions: |
| * |
| * The above copyright notice and this permission notice shall be |
| * included in all copies or substantial portions of the Software. |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, |
| * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES |
| * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND |
| * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT |
| * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, |
| * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING |
| * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR |
| * OTHER DEALINGS IN THE SOFTWARE. |
| */ |
| |
| /dts-v1/; |
| #include "stm32f746.dtsi" |
| #include "stm32f769-pinctrl.dtsi" |
| #include <dt-bindings/input/input.h> |
| #include <dt-bindings/gpio/gpio.h> |
| |
| / { |
| model = "STMicroelectronics STM32F769-DISCO board"; |
| compatible = "st,stm32f769-disco", "st,stm32f769"; |
| |
| chosen { |
| bootargs = "root=/dev/ram"; |
| stdout-path = "serial0:115200n8"; |
| }; |
| |
| memory { |
| device_type = "memory"; |
| reg = <0xC0000000 0x1000000>; |
| }; |
| |
| aliases { |
| serial0 = &usart1; |
| }; |
| |
| leds { |
| compatible = "gpio-leds"; |
| green { |
| gpios = <&gpioj 5 GPIO_ACTIVE_HIGH>; |
| linux,default-trigger = "heartbeat"; |
| }; |
| red { |
| gpios = <&gpioj 13 GPIO_ACTIVE_HIGH>; |
| }; |
| }; |
| |
| gpio_keys { |
| compatible = "gpio-keys"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| autorepeat; |
| button@0 { |
| label = "User"; |
| linux,code = <KEY_HOME>; |
| gpios = <&gpioa 0 GPIO_ACTIVE_HIGH>; |
| }; |
| }; |
| |
| usbotg_hs_phy: usb-phy { |
| #phy-cells = <0>; |
| compatible = "usb-nop-xceiv"; |
| clocks = <&rcc 0 STM32F7_AHB1_CLOCK(OTGHSULPI)>; |
| clock-names = "main_clk"; |
| }; |
| |
| mmc_vcard: mmc_vcard { |
| compatible = "regulator-fixed"; |
| regulator-name = "mmc_vcard"; |
| regulator-min-microvolt = <3300000>; |
| regulator-max-microvolt = <3300000>; |
| }; |
| }; |
| |
| &rcc { |
| compatible = "st,stm32f769-rcc", "st,stm32f746-rcc", "st,stm32-rcc"; |
| }; |
| |
| &cec { |
| pinctrl-0 = <&cec_pins_a>; |
| pinctrl-names = "default"; |
| status = "okay"; |
| }; |
| |
| &clk_hse { |
| clock-frequency = <25000000>; |
| }; |
| |
| &i2c1 { |
| pinctrl-0 = <&i2c1_pins_b>; |
| pinctrl-names = "default"; |
| i2c-scl-rising-time-ns = <185>; |
| i2c-scl-falling-time-ns = <20>; |
| status = "okay"; |
| }; |
| |
| &rtc { |
| status = "okay"; |
| }; |
| |
| &sdio2 { |
| status = "okay"; |
| vmmc-supply = <&mmc_vcard>; |
| cd-gpios = <&gpioi 15 GPIO_ACTIVE_LOW>; |
| broken-cd; |
| pinctrl-names = "default", "opendrain"; |
| pinctrl-0 = <&sdio_pins_b>; |
| pinctrl-1 = <&sdio_pins_od_b>; |
| bus-width = <4>; |
| }; |
| |
| &usart1 { |
| pinctrl-0 = <&usart1_pins_a>; |
| pinctrl-names = "default"; |
| status = "okay"; |
| }; |
| |
| &usbotg_hs { |
| dr_mode = "otg"; |
| phys = <&usbotg_hs_phy>; |
| phy-names = "usb2-phy"; |
| pinctrl-0 = <&usbotg_hs_pins_a>; |
| pinctrl-names = "default"; |
| status = "okay"; |
| }; |