| // SPDX-License-Identifier: GPL-2.0 |
| /dts-v1/; |
| #include "exynos4412-midas.dtsi" |
| |
| / { |
| compatible = "samsung,n710x", "samsung,midas", "samsung,exynos4412", "samsung,exynos4"; |
| model = "Samsung Galaxy Note 2 (GT-N7100, GT-N7105) based on Exynos4412"; |
| |
| memory@40000000 { |
| device_type = "memory"; |
| reg = <0x40000000 0x80000000>; |
| }; |
| |
| /* bootargs are passed in by bootloader */ |
| |
| cam_vdda_reg: voltage-regulator-6 { |
| compatible = "regulator-fixed"; |
| regulator-name = "CAM_SENSOR_CORE_1.2V"; |
| regulator-min-microvolt = <1200000>; |
| regulator-max-microvolt = <1200000>; |
| gpio = <&gpm4 1 GPIO_ACTIVE_HIGH>; |
| enable-active-high; |
| }; |
| }; |
| |
| &buck9_reg { |
| maxim,ena-gpios = <&gpm1 0 GPIO_ACTIVE_HIGH>; |
| }; |
| |
| &cam_af_reg { |
| gpio = <&gpm1 1 GPIO_ACTIVE_HIGH>; |
| status = "okay"; |
| }; |
| |
| &cam_io_reg { |
| gpio = <&gpm0 7 GPIO_ACTIVE_HIGH>; |
| status = "okay"; |
| }; |
| |
| &i2c_3 { |
| samsung,i2c-sda-delay = <100>; |
| samsung,i2c-slave-addr = <0x10>; |
| samsung,i2c-max-bus-freq = <400000>; |
| pinctrl-0 = <&i2c3_bus>; |
| pinctrl-names = "default"; |
| status = "okay"; |
| |
| mms152-touchscreen@48 { |
| compatible = "melfas,mms152"; |
| reg = <0x48>; |
| interrupt-parent = <&gpm2>; |
| interrupts = <3 IRQ_TYPE_EDGE_FALLING>; |
| x-size = <720>; |
| y-size = <1280>; |
| avdd-supply = <&ldo23_reg>; |
| vdd-supply = <&ldo24_reg>; |
| }; |
| }; |
| |
| &ldo13_reg { |
| regulator-name = "VCC_1.8V_LCD"; |
| regulator-always-on; |
| }; |
| |
| &ldo25_reg { |
| regulator-name = "VCI_3.0V_LCD"; |
| regulator-min-microvolt = <3000000>; |
| regulator-max-microvolt = <3000000>; |
| }; |
| |
| &s5c73m3 { |
| standby-gpios = <&gpm0 6 GPIO_ACTIVE_LOW>; /* ISP_STANDBY */ |
| vdda-supply = <&cam_vdda_reg>; |
| status = "okay"; |
| }; |