drivers/media/radio/Kconfig - linux - Git at Google


            
            #

            
            # Multimedia Video device configuration

            
            #


            menuconfig RADIO_ADAPTERS

            
            	bool "Radio Adapters"

            
            	depends on VIDEO_V4L2

            
            	depends on MEDIA_RADIO_SUPPORT

            
            	default y

            
            	---help---

            
            	  Say Y here to enable selecting AM/FM radio adapters.


            if RADIO_ADAPTERS && VIDEO_V4L2


            config RADIO_TEA575X

            
            	tristate


            source "drivers/media/radio/si470x/Kconfig"


            config RADIO_SI4713

            
            	tristate "Silicon Labs Si4713 FM Radio with RDS Transmitter support"

            
            	depends on VIDEO_V4L2


            source "drivers/media/radio/si4713/Kconfig"


            config RADIO_SI476X

            
            	tristate "Silicon Laboratories Si476x I2C FM Radio"

            
            	depends on I2C && VIDEO_V4L2

            
            	depends on MFD_SI476X_CORE

            
            	depends on SND_SOC

            
            	select SND_SOC_SI476X

            
            	---help---

            
            	  Choose Y here if you have this FM radio chip.


            	  In order to control your radio card, you will need to use programs

            
            	  that are compatible with the Video For Linux 2 API.  Information on

            
            	  this API and pointers to "v4l2" programs may be found at

            
            	  <file:Documentation/media/media_uapi.rst>.


            	  To compile this driver as a module, choose M here: the

            
            	  module will be called radio-si476x.


            config USB_MR800

            
            	tristate "AverMedia MR 800 USB FM radio support"

            
            	depends on USB && VIDEO_V4L2

            
            	---help---

            
            	  Say Y here if you want to connect this type of radio to your

            
            	  computer's USB port. Note that the audio is not digital, and

            
            	  you must connect the line out connector to a sound card or a

            
            	  set of speakers.


            	  To compile this driver as a module, choose M here: the

            
            	  module will be called radio-mr800.


            config USB_DSBR

            
            	tristate "D-Link/GemTek USB FM radio support"

            
            	depends on USB && VIDEO_V4L2

            
            	---help---

            
            	  Say Y here if you want to connect this type of radio to your

            
            	  computer's USB port. Note that the audio is not digital, and

            
            	  you must connect the line out connector to a sound card or a

            
            	  set of speakers.


            	  To compile this driver as a module, choose M here: the

            
            	  module will be called dsbr100.


            config RADIO_MAXIRADIO

            
            	tristate "Guillemot MAXI Radio FM 2000 radio"

            
            	depends on VIDEO_V4L2 && PCI

            
            	select RADIO_TEA575X

            
            	---help---

            
            	  Choose Y here if you have this radio card.  This card may also be

            
            	  found as Gemtek PCI FM.


            	  In order to control your radio card, you will need to use programs

            
            	  that are compatible with the Video For Linux API.  Information on

            
            	  this API and pointers to "v4l" programs may be found at

            
            	  <file:Documentation/media/media_uapi.rst>.


            	  To compile this driver as a module, choose M here: the

            
            	  module will be called radio-maxiradio.


            config RADIO_SHARK

            
            	tristate "Griffin radioSHARK USB radio receiver"

            
            	depends on USB

            
            	select RADIO_TEA575X

            
            	---help---

            
            	  Choose Y here if you have this radio receiver.


            	  There are 2 versions of this device, this driver is for version 1,

            
            	  which is white.


            	  In order to control your radio card, you will need to use programs

            
            	  that are compatible with the Video For Linux API.  Information on

            
            	  this API and pointers to "v4l" programs may be found at

            
            	  <file:Documentation/media/media_uapi.rst>.


            	  To compile this driver as a module, choose M here: the

            
            	  module will be called radio-shark.


            config RADIO_SHARK2

            
            	tristate "Griffin radioSHARK2 USB radio receiver"

            
            	depends on USB

            
            	---help---

            
            	  Choose Y here if you have this radio receiver.


            	  There are 2 versions of this device, this driver is for version 2,

            
            	  which is black.


            	  In order to control your radio card, you will need to use programs

            
            	  that are compatible with the Video For Linux API.  Information on

            
            	  this API and pointers to "v4l" programs may be found at

            
            	  <file:Documentation/media/media_uapi.rst>.


            	  To compile this driver as a module, choose M here: the

            
            	  module will be called radio-shark2.


            config USB_KEENE

            
            	tristate "Keene FM Transmitter USB support"

            
            	depends on USB && VIDEO_V4L2

            
            	---help---

            
            	  Say Y here if you want to connect this type of FM transmitter

            
            	  to your computer's USB port.


            	  To compile this driver as a module, choose M here: the

            
            	  module will be called radio-keene.


            config USB_RAREMONO

            
            	tristate "Thanko's Raremono AM/FM/SW radio support"

            
            	depends on USB && VIDEO_V4L2

            
            	---help---

            
            	  The 'Thanko's Raremono' device contains the Si4734 chip from Silicon Labs Inc.

            
            	  It is one of the very few or perhaps the only consumer USB radio device

            
            	  to receive the AM/FM/SW bands.


            	  Say Y here if you want to connect this type of AM/FM/SW receiver

            
            	  to your computer's USB port.


            	  To compile this driver as a module, choose M here: the

            
            	  module will be called radio-raremono.


            config USB_MA901

            
            	tristate "Masterkit MA901 USB FM radio support"

            
            	depends on USB && VIDEO_V4L2

            
            	---help---

            
            	  Say Y here if you want to connect this type of radio to your

            
            	  computer's USB port. Note that the audio is not digital, and

            
            	  you must connect the line out connector to a sound card or a

            
            	  set of speakers or headphones.


            	  To compile this driver as a module, choose M here: the

            
            	  module will be called radio-ma901.


            config RADIO_TEA5764

            
            	tristate "TEA5764 I2C FM radio support"

            
            	depends on I2C && VIDEO_V4L2

            
            	---help---

            
            	  Say Y here if you want to use the TEA5764 FM chip found in

            
            	  EZX phones. This FM chip is present in EZX phones from Motorola,

            
            	  connected to internal pxa I2C bus.


            	  To compile this driver as a module, choose M here: the

            
            	  module will be called radio-tea5764.


            config RADIO_TEA5764_XTAL

            
            	bool "TEA5764 crystal reference"

            
            	depends on RADIO_TEA5764=y

            
            	default y

            
            	help

            
            	  Say Y here if TEA5764 have a 32768 Hz crystal in circuit, say N

            
            	  here if TEA5764 reference frequency is connected in FREQIN.


            config RADIO_SAA7706H

            
            	tristate "SAA7706H Car Radio DSP"

            
            	depends on I2C && VIDEO_V4L2

            
            	---help---

            
            	  Say Y here if you want to use the SAA7706H Car radio Digital

            
            	  Signal Processor, found for instance on the Russellville development

            
            	  board. On the russellville the device is connected to internal

            
            	  timberdale I2C bus.


            	  To compile this driver as a module, choose M here: the

            
            	  module will be called SAA7706H.


            config RADIO_TEF6862

            
            	tristate "TEF6862 Car Radio Enhanced Selectivity Tuner"

            
            	depends on I2C && VIDEO_V4L2

            
            	---help---

            
            	  Say Y here if you want to use the TEF6862 Car Radio Enhanced

            
            	  Selectivity Tuner, found for instance on the Russellville development

            
            	  board. On the russellville the device is connected to internal

            
            	  timberdale I2C bus.


            	  To compile this driver as a module, choose M here: the

            
            	  module will be called TEF6862.


            config RADIO_TIMBERDALE

            
            	tristate "Enable the Timberdale radio driver"

            
            	depends on MFD_TIMBERDALE && VIDEO_V4L2

            
            	depends on I2C	# for RADIO_SAA7706H

            
            	select RADIO_TEF6862

            
            	select RADIO_SAA7706H

            
            	---help---

            
            	  This is a kind of umbrella driver for the Radio Tuner and DSP

            
            	  found behind the Timberdale FPGA on the Russellville board.

            
            	  Enabling this driver will automatically select the DSP and tuner.


            config RADIO_WL1273

            
            	tristate "Texas Instruments WL1273 I2C FM Radio"

            
            	depends on I2C && VIDEO_V4L2

            
            	select MFD_CORE

            
            	select MFD_WL1273_CORE

            
            	select FW_LOADER

            
            	---help---

            
            	  Choose Y here if you have this FM radio chip.


            	  In order to control your radio card, you will need to use programs

            
            	  that are compatible with the Video For Linux 2 API.  Information on

            
            	  this API and pointers to "v4l2" programs may be found at

            
            	  <file:Documentation/media/media_uapi.rst>.


            	  To compile this driver as a module, choose M here: the

            
            	  module will be called radio-wl1273.


            # TI's ST based wl128x FM radio

            
            source "drivers/media/radio/wl128x/Kconfig"


            #

            
            # ISA drivers configuration

            
            #


            menuconfig V4L_RADIO_ISA_DRIVERS

            
            	bool "ISA radio devices"

            
            	depends on ISA || COMPILE_TEST

            
            	default n

            
            	---help---

            
            	  Say Y here to enable support for these ISA drivers.


            if V4L_RADIO_ISA_DRIVERS


            config RADIO_ISA

            
            	depends on ISA || COMPILE_TEST

            
            	tristate


            config RADIO_CADET

            
            	tristate "ADS Cadet AM/FM Tuner"

            
            	depends on ISA || COMPILE_TEST

            
            	depends on VIDEO_V4L2

            
            	---help---

            
            	  Choose Y here if you have one of these AM/FM radio cards, and then

            
            	  fill in the port address below.


            	  To compile this driver as a module, choose M here: the

            
            	  module will be called radio-cadet.


            config RADIO_RTRACK

            
            	tristate "AIMSlab RadioTrack (aka RadioReveal) support"

            
            	depends on ISA || COMPILE_TEST

            
            	depends on VIDEO_V4L2

            
            	select RADIO_ISA

            
            	---help---

            
            	  Choose Y here if you have one of these FM radio cards, and then fill

            
            	  in the port address below.


            	  Note that newer AIMSlab RadioTrack cards have a different chipset

            
            	  and are not supported by this driver.  For these cards, use the

            
            	  RadioTrack II driver below.


            	  If you have a GemTeks combined (PnP) sound- and radio card you must

            
            	  use this driver as a module and setup the card with isapnptools.

            
            	  You must also pass the module a suitable io parameter, 0x248 has

            
            	  been reported to be used by these cards.


            	  More information is contained in the file

            
            	  <file:Documentation/media/v4l-drivers/radiotrack.rst>.


            	  To compile this driver as a module, choose M here: the

            
            	  module will be called radio-aimslab.


            config RADIO_RTRACK_PORT

            
            	hex "RadioTrack i/o port (0x20f or 0x30f)"

            
            	depends on RADIO_RTRACK=y

            
            	default "30f"

            
            	help

            
            	  Enter either 0x30f or 0x20f here.  The card default is 0x30f, if you

            
            	  haven't changed the jumper setting on the card.


            config RADIO_RTRACK2

            
            	tristate "AIMSlab RadioTrack II support"

            
            	depends on ISA || COMPILE_TEST

            
            	depends on VIDEO_V4L2

            
            	select RADIO_ISA

            
            	---help---

            
            	  Choose Y here if you have this FM radio card, and then fill in the

            
            	  port address below.


            	  Note: this driver hasn't been tested since a long time due to lack

            
            	  of hardware. If you have this hardware, then please contact the

            
            	  linux-media mailinglist.


            	  To compile this driver as a module, choose M here: the

            
            	  module will be called radio-rtrack2.


            config RADIO_RTRACK2_PORT

            
            	hex "RadioTrack II i/o port (0x20c or 0x30c)"

            
            	depends on RADIO_RTRACK2=y

            
            	default "30c"

            
            	help

            
            	  Enter either 0x30c or 0x20c here.  The card default is 0x30c, if you

            
            	  haven't changed the jumper setting on the card.


            config RADIO_AZTECH

            
            	tristate "Aztech/Packard Bell Radio"

            
            	depends on ISA || COMPILE_TEST

            
            	depends on VIDEO_V4L2

            
            	select RADIO_ISA

            
            	---help---

            
            	  Choose Y here if you have one of these FM radio cards, and then fill

            
            	  in the port address below.


            	  To compile this driver as a module, choose M here: the

            
            	  module will be called radio-aztech.


            config RADIO_AZTECH_PORT

            
            	hex "Aztech/Packard Bell I/O port (0x350 or 0x358)"

            
            	depends on RADIO_AZTECH=y

            
            	default "350"

            
            	help

            
            	  Enter either 0x350 or 0x358 here.  The card default is 0x350, if you

            
            	  haven't changed the setting of jumper JP3 on the card.  Removing the

            
            	  jumper sets the card to 0x358.


            config RADIO_GEMTEK

            
            	tristate "GemTek Radio card (or compatible) support"

            
            	depends on ISA || COMPILE_TEST

            
            	depends on VIDEO_V4L2

            
            	select RADIO_ISA

            
            	---help---

            
            	  Choose Y here if you have this FM radio card, and then fill in the

            
            	  I/O port address and settings below. The following cards either have

            
            	  GemTek Radio tuner or are rebranded GemTek Radio cards:


            	  - Sound Vision 16 Gold with FM Radio

            
            	  - Typhoon Radio card (some models)

            
            	  - Hama Radio card


            	  To compile this driver as a module, choose M here: the

            
            	  module will be called radio-gemtek.


            config RADIO_GEMTEK_PORT

            
            	hex "Fixed I/O port (0x20c, 0x30c, 0x24c, 0x34c, 0x248 or 0x28c)"

            
            	depends on RADIO_GEMTEK=y

            
            	default "34c"

            
            	help

            
            	  Enter either 0x20c, 0x30c, 0x24c, 0x34c, 0x248 or 0x28c here. The

            
            	  card default is 0x34c, if you haven't changed the jumper setting

            
            	  on the card.


            	  On Sound Vision 16 Gold PnP with FM Radio (ESS1869+FM Gemtek), the I/O

            
            	  port is 0x20c, 0x248 or 0x28c.


            	  If automatic I/O port probing is enabled this port will be used only

            
            	  in case of automatic probing failure, ie. as a fallback.


            config RADIO_GEMTEK_PROBE

            
            	bool "Automatic I/O port probing"

            
            	depends on RADIO_GEMTEK=y

            
            	default y

            
            	help

            
            	  Say Y here to enable automatic probing for GemTek Radio card. The

            
            	  following ports will be probed: 0x20c, 0x30c, 0x24c, 0x34c, 0x248 and

            
            	  0x28c.


            config RADIO_MIROPCM20

            
            	tristate "miroSOUND PCM20 radio"

            
            	depends on ISA || COMPILE_TEST

            
            	depends on ISA_DMA_API && VIDEO_V4L2 && SND

            
            	select SND_ISA

            
            	select SND_MIRO

            
            	---help---

            
            	  Choose Y here if you have this FM radio card. You also need to enable

            
            	  the ALSA sound system. This choice automatically selects the ALSA

            
            	  sound card driver "Miro miroSOUND PCM1pro/PCM12/PCM20radio" as this

            
            	  is required for the radio-miropcm20.


            	  To compile this driver as a module, choose M here: the

            
            	  module will be called radio-miropcm20.


            config RADIO_SF16FMI

            
            	tristate "SF16-FMI/SF16-FMP/SF16-FMD Radio"

            
            	depends on ISA || COMPILE_TEST

            
            	depends on VIDEO_V4L2

            
            	---help---

            
            	  Choose Y here if you have one of these FM radio cards.


            	  To compile this driver as a module, choose M here: the

            
            	  module will be called radio-sf16fmi.


            config RADIO_SF16FMR2

            
            	tristate "SF16-FMR2/SF16-FMD2 Radio"

            
            	depends on ISA || COMPILE_TEST

            
            	depends on VIDEO_V4L2

            
            	select RADIO_TEA575X

            
            	---help---

            
            	  Choose Y here if you have one of these FM radio cards.


            	  To compile this driver as a module, choose M here: the

            
            	  module will be called radio-sf16fmr2.


            config RADIO_TERRATEC

            
            	tristate "TerraTec ActiveRadio ISA Standalone"

            
            	depends on ISA || COMPILE_TEST

            
            	depends on VIDEO_V4L2

            
            	select RADIO_ISA

            
            	---help---

            
            	  Choose Y here if you have this FM radio card.


            	  Note: this driver hasn't been tested since a long time due to lack

            
            	  of hardware. If you have this hardware, then please contact the

            
            	  linux-media mailinglist.


            	  To compile this driver as a module, choose M here: the

            
            	  module will be called radio-terratec.


            config RADIO_TRUST

            
            	tristate "Trust FM radio card"

            
            	depends on ISA || COMPILE_TEST

            
            	depends on VIDEO_V4L2

            
            	select RADIO_ISA

            
            	help

            
            	  This is a driver for the Trust FM radio cards. Say Y if you have

            
            	  such a card and want to use it under Linux.


            	  Note: this driver hasn't been tested since a long time due to lack

            
            	  of hardware. If you have this hardware, then please contact the

            
            	  linux-media mailinglist.


            	  To compile this driver as a module, choose M here: the

            
            	  module will be called radio-trust.


            config RADIO_TRUST_PORT

            
            	hex "Trust i/o port (usually 0x350 or 0x358)"

            
            	depends on RADIO_TRUST=y

            
            	default "350"

            
            	help

            
            	  Enter the I/O port of your Trust FM radio card. If unsure, try the

            
            	  values "0x350" or "0x358".


            config RADIO_TYPHOON

            
            	tristate "Typhoon Radio (a.k.a. EcoRadio)"

            
            	depends on ISA || COMPILE_TEST

            
            	depends on VIDEO_V4L2

            
            	select RADIO_ISA

            
            	---help---

            
            	  Choose Y here if you have one of these FM radio cards, and then fill

            
            	  in the port address and the frequency used for muting below.


            	  Note: this driver hasn't been tested since a long time due to lack

            
            	  of hardware. If you have this hardware, then please contact the

            
            	  linux-media mailinglist.


            	  To compile this driver as a module, choose M here: the

            
            	  module will be called radio-typhoon.


            config RADIO_TYPHOON_PORT

            
            	hex "Typhoon I/O port (0x316 or 0x336)"

            
            	depends on RADIO_TYPHOON=y

            
            	default "316"

            
            	help

            
            	  Enter the I/O port of your Typhoon or EcoRadio radio card.


            config RADIO_TYPHOON_MUTEFREQ

            
            	int "Typhoon frequency set when muting the device (kHz)"

            
            	depends on RADIO_TYPHOON=y

            
            	default "87500"

            
            	help

            
            	  Enter the frequency used for muting the radio. The device is never

            
            	  completely silent. If the volume is just turned down, you can still

            
            	  hear silent voices and music. For that reason, the frequency of the

            
            	  radio device is set to the frequency you can enter here whenever

            
            	  the device is muted. There should be no local radio station at that

            
            	  frequency.


            config RADIO_ZOLTRIX

            
            	tristate "Zoltrix Radio"

            
            	depends on ISA || COMPILE_TEST

            
            	depends on VIDEO_V4L2

            
            	select RADIO_ISA

            
            	---help---

            
            	  Choose Y here if you have one of these FM radio cards, and then fill

            
            	  in the port address below.


            	  Note: this driver hasn't been tested since a long time due to lack

            
            	  of hardware. If you have this hardware, then please contact the

            
            	  linux-media mailinglist.


            	  To compile this driver as a module, choose M here: the

            
            	  module will be called radio-zoltrix.


            config RADIO_ZOLTRIX_PORT

            
            	hex "ZOLTRIX I/O port (0x20c or 0x30c)"

            
            	depends on RADIO_ZOLTRIX=y

            
            	default "20c"

            
            	help

            
            	  Enter the I/O port of your Zoltrix radio card.


            endif # V4L_RADIO_ISA_DRIVERS


            endif # RADIO_ADAPTERS
	#
	# Multimedia Video device configuration
	#

	menuconfig RADIO_ADAPTERS
	bool "Radio Adapters"
	depends on VIDEO_V4L2
	depends on MEDIA_RADIO_SUPPORT
	default y
	---help---
	Say Y here to enable selecting AM/FM radio adapters.

	if RADIO_ADAPTERS && VIDEO_V4L2

	config RADIO_TEA575X
	tristate

	source "drivers/media/radio/si470x/Kconfig"

	config RADIO_SI4713
	tristate "Silicon Labs Si4713 FM Radio with RDS Transmitter support"
	depends on VIDEO_V4L2

	source "drivers/media/radio/si4713/Kconfig"

	config RADIO_SI476X
	tristate "Silicon Laboratories Si476x I2C FM Radio"
	depends on I2C && VIDEO_V4L2
	depends on MFD_SI476X_CORE
	depends on SND_SOC
	select SND_SOC_SI476X
	---help---
	Choose Y here if you have this FM radio chip.

	In order to control your radio card, you will need to use programs
	that are compatible with the Video For Linux 2 API. Information on
	this API and pointers to "v4l2" programs may be found at
	<file:Documentation/media/media_uapi.rst>.

	To compile this driver as a module, choose M here: the
	module will be called radio-si476x.

	config USB_MR800
	tristate "AverMedia MR 800 USB FM radio support"
	depends on USB && VIDEO_V4L2
	---help---
	Say Y here if you want to connect this type of radio to your
	computer's USB port. Note that the audio is not digital, and
	you must connect the line out connector to a sound card or a
	set of speakers.

	To compile this driver as a module, choose M here: the
	module will be called radio-mr800.

	config USB_DSBR
	tristate "D-Link/GemTek USB FM radio support"
	depends on USB && VIDEO_V4L2
	---help---
	Say Y here if you want to connect this type of radio to your
	computer's USB port. Note that the audio is not digital, and
	you must connect the line out connector to a sound card or a
	set of speakers.

	To compile this driver as a module, choose M here: the
	module will be called dsbr100.

	config RADIO_MAXIRADIO
	tristate "Guillemot MAXI Radio FM 2000 radio"
	depends on VIDEO_V4L2 && PCI
	select RADIO_TEA575X
	---help---
	Choose Y here if you have this radio card. This card may also be
	found as Gemtek PCI FM.

	In order to control your radio card, you will need to use programs
	that are compatible with the Video For Linux API. Information on
	this API and pointers to "v4l" programs may be found at
	<file:Documentation/media/media_uapi.rst>.

	To compile this driver as a module, choose M here: the
	module will be called radio-maxiradio.

	config RADIO_SHARK
	tristate "Griffin radioSHARK USB radio receiver"
	depends on USB
	select RADIO_TEA575X
	---help---
	Choose Y here if you have this radio receiver.

	There are 2 versions of this device, this driver is for version 1,
	which is white.

	In order to control your radio card, you will need to use programs
	that are compatible with the Video For Linux API. Information on
	this API and pointers to "v4l" programs may be found at
	<file:Documentation/media/media_uapi.rst>.

	To compile this driver as a module, choose M here: the
	module will be called radio-shark.

	config RADIO_SHARK2
	tristate "Griffin radioSHARK2 USB radio receiver"
	depends on USB
	---help---
	Choose Y here if you have this radio receiver.

	There are 2 versions of this device, this driver is for version 2,
	which is black.

	In order to control your radio card, you will need to use programs
	that are compatible with the Video For Linux API. Information on
	this API and pointers to "v4l" programs may be found at
	<file:Documentation/media/media_uapi.rst>.

	To compile this driver as a module, choose M here: the
	module will be called radio-shark2.

	config USB_KEENE
	tristate "Keene FM Transmitter USB support"
	depends on USB && VIDEO_V4L2
	---help---
	Say Y here if you want to connect this type of FM transmitter
	to your computer's USB port.

	To compile this driver as a module, choose M here: the
	module will be called radio-keene.

	config USB_RAREMONO
	tristate "Thanko's Raremono AM/FM/SW radio support"
	depends on USB && VIDEO_V4L2
	---help---
	The 'Thanko's Raremono' device contains the Si4734 chip from Silicon Labs Inc.
	It is one of the very few or perhaps the only consumer USB radio device
	to receive the AM/FM/SW bands.

	Say Y here if you want to connect this type of AM/FM/SW receiver
	to your computer's USB port.

	To compile this driver as a module, choose M here: the
	module will be called radio-raremono.

	config USB_MA901
	tristate "Masterkit MA901 USB FM radio support"
	depends on USB && VIDEO_V4L2
	---help---
	Say Y here if you want to connect this type of radio to your
	computer's USB port. Note that the audio is not digital, and
	you must connect the line out connector to a sound card or a
	set of speakers or headphones.

	To compile this driver as a module, choose M here: the
	module will be called radio-ma901.

	config RADIO_TEA5764
	tristate "TEA5764 I2C FM radio support"
	depends on I2C && VIDEO_V4L2
	---help---
	Say Y here if you want to use the TEA5764 FM chip found in
	EZX phones. This FM chip is present in EZX phones from Motorola,
	connected to internal pxa I2C bus.

	To compile this driver as a module, choose M here: the
	module will be called radio-tea5764.

	config RADIO_TEA5764_XTAL
	bool "TEA5764 crystal reference"
	depends on RADIO_TEA5764=y
	default y
	help
	Say Y here if TEA5764 have a 32768 Hz crystal in circuit, say N
	here if TEA5764 reference frequency is connected in FREQIN.

	config RADIO_SAA7706H
	tristate "SAA7706H Car Radio DSP"
	depends on I2C && VIDEO_V4L2
	---help---
	Say Y here if you want to use the SAA7706H Car radio Digital
	Signal Processor, found for instance on the Russellville development
	board. On the russellville the device is connected to internal
	timberdale I2C bus.

	To compile this driver as a module, choose M here: the
	module will be called SAA7706H.

	config RADIO_TEF6862
	tristate "TEF6862 Car Radio Enhanced Selectivity Tuner"
	depends on I2C && VIDEO_V4L2
	---help---
	Say Y here if you want to use the TEF6862 Car Radio Enhanced
	Selectivity Tuner, found for instance on the Russellville development
	board. On the russellville the device is connected to internal
	timberdale I2C bus.

	To compile this driver as a module, choose M here: the
	module will be called TEF6862.

	config RADIO_TIMBERDALE
	tristate "Enable the Timberdale radio driver"
	depends on MFD_TIMBERDALE && VIDEO_V4L2
	depends on I2C # for RADIO_SAA7706H
	select RADIO_TEF6862
	select RADIO_SAA7706H
	---help---
	This is a kind of umbrella driver for the Radio Tuner and DSP
	found behind the Timberdale FPGA on the Russellville board.
	Enabling this driver will automatically select the DSP and tuner.

	config RADIO_WL1273
	tristate "Texas Instruments WL1273 I2C FM Radio"
	depends on I2C && VIDEO_V4L2
	select MFD_CORE
	select MFD_WL1273_CORE
	select FW_LOADER
	---help---
	Choose Y here if you have this FM radio chip.

	In order to control your radio card, you will need to use programs
	that are compatible with the Video For Linux 2 API. Information on
	this API and pointers to "v4l2" programs may be found at
	<file:Documentation/media/media_uapi.rst>.

	To compile this driver as a module, choose M here: the
	module will be called radio-wl1273.

	# TI's ST based wl128x FM radio
	source "drivers/media/radio/wl128x/Kconfig"

	#
	# ISA drivers configuration
	#

	menuconfig V4L_RADIO_ISA_DRIVERS
	bool "ISA radio devices"
	depends on ISA \|\| COMPILE_TEST
	default n
	---help---
	Say Y here to enable support for these ISA drivers.

	if V4L_RADIO_ISA_DRIVERS

	config RADIO_ISA
	depends on ISA \|\| COMPILE_TEST
	tristate

	config RADIO_CADET
	tristate "ADS Cadet AM/FM Tuner"
	depends on ISA \|\| COMPILE_TEST
	depends on VIDEO_V4L2
	---help---
	Choose Y here if you have one of these AM/FM radio cards, and then
	fill in the port address below.

	To compile this driver as a module, choose M here: the
	module will be called radio-cadet.

	config RADIO_RTRACK
	tristate "AIMSlab RadioTrack (aka RadioReveal) support"
	depends on ISA \|\| COMPILE_TEST
	depends on VIDEO_V4L2
	select RADIO_ISA
	---help---
	Choose Y here if you have one of these FM radio cards, and then fill
	in the port address below.

	Note that newer AIMSlab RadioTrack cards have a different chipset
	and are not supported by this driver. For these cards, use the
	RadioTrack II driver below.

	If you have a GemTeks combined (PnP) sound- and radio card you must
	use this driver as a module and setup the card with isapnptools.
	You must also pass the module a suitable io parameter, 0x248 has
	been reported to be used by these cards.

	More information is contained in the file
	<file:Documentation/media/v4l-drivers/radiotrack.rst>.

	To compile this driver as a module, choose M here: the
	module will be called radio-aimslab.

	config RADIO_RTRACK_PORT
	hex "RadioTrack i/o port (0x20f or 0x30f)"
	depends on RADIO_RTRACK=y
	default "30f"
	help
	Enter either 0x30f or 0x20f here. The card default is 0x30f, if you
	haven't changed the jumper setting on the card.

	config RADIO_RTRACK2
	tristate "AIMSlab RadioTrack II support"
	depends on ISA \|\| COMPILE_TEST
	depends on VIDEO_V4L2
	select RADIO_ISA
	---help---
	Choose Y here if you have this FM radio card, and then fill in the
	port address below.

	Note: this driver hasn't been tested since a long time due to lack
	of hardware. If you have this hardware, then please contact the
	linux-media mailinglist.

	To compile this driver as a module, choose M here: the
	module will be called radio-rtrack2.

	config RADIO_RTRACK2_PORT
	hex "RadioTrack II i/o port (0x20c or 0x30c)"
	depends on RADIO_RTRACK2=y
	default "30c"
	help
	Enter either 0x30c or 0x20c here. The card default is 0x30c, if you
	haven't changed the jumper setting on the card.

	config RADIO_AZTECH
	tristate "Aztech/Packard Bell Radio"
	depends on ISA \|\| COMPILE_TEST
	depends on VIDEO_V4L2
	select RADIO_ISA
	---help---
	Choose Y here if you have one of these FM radio cards, and then fill
	in the port address below.

	To compile this driver as a module, choose M here: the
	module will be called radio-aztech.

	config RADIO_AZTECH_PORT
	hex "Aztech/Packard Bell I/O port (0x350 or 0x358)"
	depends on RADIO_AZTECH=y
	default "350"
	help
	Enter either 0x350 or 0x358 here. The card default is 0x350, if you
	haven't changed the setting of jumper JP3 on the card. Removing the
	jumper sets the card to 0x358.

	config RADIO_GEMTEK
	tristate "GemTek Radio card (or compatible) support"
	depends on ISA \|\| COMPILE_TEST
	depends on VIDEO_V4L2
	select RADIO_ISA
	---help---
	Choose Y here if you have this FM radio card, and then fill in the
	I/O port address and settings below. The following cards either have
	GemTek Radio tuner or are rebranded GemTek Radio cards:

	- Sound Vision 16 Gold with FM Radio
	- Typhoon Radio card (some models)
	- Hama Radio card

	To compile this driver as a module, choose M here: the
	module will be called radio-gemtek.

	config RADIO_GEMTEK_PORT
	hex "Fixed I/O port (0x20c, 0x30c, 0x24c, 0x34c, 0x248 or 0x28c)"
	depends on RADIO_GEMTEK=y
	default "34c"
	help
	Enter either 0x20c, 0x30c, 0x24c, 0x34c, 0x248 or 0x28c here. The
	card default is 0x34c, if you haven't changed the jumper setting
	on the card.

	On Sound Vision 16 Gold PnP with FM Radio (ESS1869+FM Gemtek), the I/O
	port is 0x20c, 0x248 or 0x28c.

	If automatic I/O port probing is enabled this port will be used only
	in case of automatic probing failure, ie. as a fallback.

	config RADIO_GEMTEK_PROBE
	bool "Automatic I/O port probing"
	depends on RADIO_GEMTEK=y
	default y
	help
	Say Y here to enable automatic probing for GemTek Radio card. The
	following ports will be probed: 0x20c, 0x30c, 0x24c, 0x34c, 0x248 and
	0x28c.

	config RADIO_MIROPCM20
	tristate "miroSOUND PCM20 radio"
	depends on ISA \|\| COMPILE_TEST
	depends on ISA_DMA_API && VIDEO_V4L2 && SND
	select SND_ISA
	select SND_MIRO
	---help---
	Choose Y here if you have this FM radio card. You also need to enable
	the ALSA sound system. This choice automatically selects the ALSA
	sound card driver "Miro miroSOUND PCM1pro/PCM12/PCM20radio" as this
	is required for the radio-miropcm20.

	To compile this driver as a module, choose M here: the
	module will be called radio-miropcm20.

	config RADIO_SF16FMI
	tristate "SF16-FMI/SF16-FMP/SF16-FMD Radio"
	depends on ISA \|\| COMPILE_TEST
	depends on VIDEO_V4L2
	---help---
	Choose Y here if you have one of these FM radio cards.

	To compile this driver as a module, choose M here: the
	module will be called radio-sf16fmi.

	config RADIO_SF16FMR2
	tristate "SF16-FMR2/SF16-FMD2 Radio"
	depends on ISA \|\| COMPILE_TEST
	depends on VIDEO_V4L2
	select RADIO_TEA575X
	---help---
	Choose Y here if you have one of these FM radio cards.

	To compile this driver as a module, choose M here: the
	module will be called radio-sf16fmr2.

	config RADIO_TERRATEC
	tristate "TerraTec ActiveRadio ISA Standalone"
	depends on ISA \|\| COMPILE_TEST
	depends on VIDEO_V4L2
	select RADIO_ISA
	---help---
	Choose Y here if you have this FM radio card.

	Note: this driver hasn't been tested since a long time due to lack
	of hardware. If you have this hardware, then please contact the
	linux-media mailinglist.

	To compile this driver as a module, choose M here: the
	module will be called radio-terratec.

	config RADIO_TRUST
	tristate "Trust FM radio card"
	depends on ISA \|\| COMPILE_TEST
	depends on VIDEO_V4L2
	select RADIO_ISA
	help
	This is a driver for the Trust FM radio cards. Say Y if you have
	such a card and want to use it under Linux.

	Note: this driver hasn't been tested since a long time due to lack
	of hardware. If you have this hardware, then please contact the
	linux-media mailinglist.

	To compile this driver as a module, choose M here: the
	module will be called radio-trust.

	config RADIO_TRUST_PORT
	hex "Trust i/o port (usually 0x350 or 0x358)"
	depends on RADIO_TRUST=y
	default "350"
	help
	Enter the I/O port of your Trust FM radio card. If unsure, try the
	values "0x350" or "0x358".

	config RADIO_TYPHOON
	tristate "Typhoon Radio (a.k.a. EcoRadio)"
	depends on ISA \|\| COMPILE_TEST
	depends on VIDEO_V4L2
	select RADIO_ISA
	---help---
	Choose Y here if you have one of these FM radio cards, and then fill
	in the port address and the frequency used for muting below.

	Note: this driver hasn't been tested since a long time due to lack
	of hardware. If you have this hardware, then please contact the
	linux-media mailinglist.

	To compile this driver as a module, choose M here: the
	module will be called radio-typhoon.

	config RADIO_TYPHOON_PORT
	hex "Typhoon I/O port (0x316 or 0x336)"
	depends on RADIO_TYPHOON=y
	default "316"
	help
	Enter the I/O port of your Typhoon or EcoRadio radio card.

	config RADIO_TYPHOON_MUTEFREQ
	int "Typhoon frequency set when muting the device (kHz)"
	depends on RADIO_TYPHOON=y
	default "87500"
	help
	Enter the frequency used for muting the radio. The device is never
	completely silent. If the volume is just turned down, you can still
	hear silent voices and music. For that reason, the frequency of the
	radio device is set to the frequency you can enter here whenever
	the device is muted. There should be no local radio station at that
	frequency.

	config RADIO_ZOLTRIX
	tristate "Zoltrix Radio"
	depends on ISA \|\| COMPILE_TEST
	depends on VIDEO_V4L2
	select RADIO_ISA
	---help---
	Choose Y here if you have one of these FM radio cards, and then fill
	in the port address below.

	Note: this driver hasn't been tested since a long time due to lack
	of hardware. If you have this hardware, then please contact the
	linux-media mailinglist.

	To compile this driver as a module, choose M here: the
	module will be called radio-zoltrix.

	config RADIO_ZOLTRIX_PORT
	hex "ZOLTRIX I/O port (0x20c or 0x30c)"
	depends on RADIO_ZOLTRIX=y
	default "20c"
	help
	Enter the I/O port of your Zoltrix radio card.

	endif # V4L_RADIO_ISA_DRIVERS

	endif # RADIO_ADAPTERS