| config QCOM_GDSC | |
| bool | |
| select PM_GENERIC_DOMAINS if PM | |
| config QCOM_RPMCC | |
| bool | |
| config COMMON_CLK_QCOM | |
| tristate "Support for Qualcomm's clock controllers" | |
| depends on OF | |
| depends on ARCH_QCOM || COMPILE_TEST | |
| select REGMAP_MMIO | |
| select RESET_CONTROLLER | |
| config QCOM_A53PLL | |
| tristate "MSM8916 A53 PLL" | |
| depends on COMMON_CLK_QCOM | |
| default ARCH_QCOM | |
| help | |
| Support for the A53 PLL on MSM8916 devices. It provides | |
| the CPU with frequencies above 1GHz. | |
| Say Y if you want to support higher CPU frequencies on MSM8916 | |
| devices. | |
| config QCOM_CLK_APCS_MSM8916 | |
| tristate "MSM8916 APCS Clock Controller" | |
| depends on COMMON_CLK_QCOM | |
| depends on QCOM_APCS_IPC || COMPILE_TEST | |
| default ARCH_QCOM | |
| help | |
| Support for the APCS Clock Controller on msm8916 devices. The | |
| APCS is managing the mux and divider which feeds the CPUs. | |
| Say Y if you want to support CPU frequency scaling on devices | |
| such as msm8916. | |
| config QCOM_CLK_RPM | |
| tristate "RPM based Clock Controller" | |
| depends on COMMON_CLK_QCOM && MFD_QCOM_RPM | |
| select QCOM_RPMCC | |
| help | |
| The RPM (Resource Power Manager) is a dedicated hardware engine for | |
| managing the shared SoC resources in order to keep the lowest power | |
| profile. It communicates with other hardware subsystems via shared | |
| memory and accepts clock requests, aggregates the requests and turns | |
| the clocks on/off or scales them on demand. | |
| Say Y if you want to support the clocks exposed by the RPM on | |
| platforms such as apq8064, msm8660, msm8960 etc. | |
| config QCOM_CLK_SMD_RPM | |
| tristate "RPM over SMD based Clock Controller" | |
| depends on COMMON_CLK_QCOM && QCOM_SMD_RPM | |
| select QCOM_RPMCC | |
| help | |
| The RPM (Resource Power Manager) is a dedicated hardware engine for | |
| managing the shared SoC resources in order to keep the lowest power | |
| profile. It communicates with other hardware subsystems via shared | |
| memory and accepts clock requests, aggregates the requests and turns | |
| the clocks on/off or scales them on demand. | |
| Say Y if you want to support the clocks exposed by the RPM on | |
| platforms such as apq8016, apq8084, msm8974 etc. | |
| config QCOM_CLK_RPMH | |
| tristate "RPMh Clock Driver" | |
| depends on COMMON_CLK_QCOM && QCOM_RPMH | |
| help | |
| RPMh manages shared resources on some Qualcomm Technologies, Inc. | |
| SoCs. It accepts requests from other hardware subsystems via RSC. | |
| Say Y if you want to support the clocks exposed by RPMh on | |
| platforms such as SDM845. | |
| config APQ_GCC_8084 | |
| tristate "APQ8084 Global Clock Controller" | |
| select QCOM_GDSC | |
| depends on COMMON_CLK_QCOM | |
| help | |
| Support for the global clock controller on apq8084 devices. | |
| Say Y if you want to use peripheral devices such as UART, SPI, | |
| i2c, USB, SD/eMMC, SATA, PCIe, etc. | |
| config APQ_MMCC_8084 | |
| tristate "APQ8084 Multimedia Clock Controller" | |
| select APQ_GCC_8084 | |
| select QCOM_GDSC | |
| depends on COMMON_CLK_QCOM | |
| help | |
| Support for the multimedia clock controller on apq8084 devices. | |
| Say Y if you want to support multimedia devices such as display, | |
| graphics, video encode/decode, camera, etc. | |
| config IPQ_GCC_4019 | |
| tristate "IPQ4019 Global Clock Controller" | |
| depends on COMMON_CLK_QCOM | |
| help | |
| Support for the global clock controller on ipq4019 devices. | |
| Say Y if you want to use peripheral devices such as UART, SPI, | |
| i2c, USB, SD/eMMC, etc. | |
| config IPQ_GCC_806X | |
| tristate "IPQ806x Global Clock Controller" | |
| depends on COMMON_CLK_QCOM | |
| help | |
| Support for the global clock controller on ipq806x devices. | |
| Say Y if you want to use peripheral devices such as UART, SPI, | |
| i2c, USB, SD/eMMC, etc. | |
| config IPQ_LCC_806X | |
| tristate "IPQ806x LPASS Clock Controller" | |
| select IPQ_GCC_806X | |
| depends on COMMON_CLK_QCOM | |
| help | |
| Support for the LPASS clock controller on ipq806x devices. | |
| Say Y if you want to use audio devices such as i2s, pcm, | |
| S/PDIF, etc. | |
| config IPQ_GCC_8074 | |
| tristate "IPQ8074 Global Clock Controller" | |
| depends on COMMON_CLK_QCOM | |
| help | |
| Support for global clock controller on ipq8074 devices. | |
| Say Y if you want to use peripheral devices such as UART, SPI, | |
| i2c, USB, SD/eMMC, etc. Select this for the root clock | |
| of ipq8074. | |
| config MSM_GCC_8660 | |
| tristate "MSM8660 Global Clock Controller" | |
| depends on COMMON_CLK_QCOM | |
| help | |
| Support for the global clock controller on msm8660 devices. | |
| Say Y if you want to use peripheral devices such as UART, SPI, | |
| i2c, USB, SD/eMMC, etc. | |
| config MSM_GCC_8916 | |
| tristate "MSM8916 Global Clock Controller" | |
| select QCOM_GDSC | |
| depends on COMMON_CLK_QCOM | |
| help | |
| Support for the global clock controller on msm8916 devices. | |
| Say Y if you want to use devices such as UART, SPI i2c, USB, | |
| SD/eMMC, display, graphics, camera etc. | |
| config MSM_GCC_8960 | |
| tristate "APQ8064/MSM8960 Global Clock Controller" | |
| depends on COMMON_CLK_QCOM | |
| help | |
| Support for the global clock controller on apq8064/msm8960 devices. | |
| Say Y if you want to use peripheral devices such as UART, SPI, | |
| i2c, USB, SD/eMMC, SATA, PCIe, etc. | |
| config MSM_LCC_8960 | |
| tristate "APQ8064/MSM8960 LPASS Clock Controller" | |
| select MSM_GCC_8960 | |
| depends on COMMON_CLK_QCOM | |
| help | |
| Support for the LPASS clock controller on apq8064/msm8960 devices. | |
| Say Y if you want to use audio devices such as i2s, pcm, | |
| SLIMBus, etc. | |
| config MDM_GCC_9615 | |
| tristate "MDM9615 Global Clock Controller" | |
| depends on COMMON_CLK_QCOM | |
| help | |
| Support for the global clock controller on mdm9615 devices. | |
| Say Y if you want to use peripheral devices such as UART, SPI, | |
| i2c, USB, SD/eMMC, etc. | |
| config MDM_LCC_9615 | |
| tristate "MDM9615 LPASS Clock Controller" | |
| select MDM_GCC_9615 | |
| depends on COMMON_CLK_QCOM | |
| help | |
| Support for the LPASS clock controller on mdm9615 devices. | |
| Say Y if you want to use audio devices such as i2s, pcm, | |
| SLIMBus, etc. | |
| config MSM_MMCC_8960 | |
| tristate "MSM8960 Multimedia Clock Controller" | |
| select MSM_GCC_8960 | |
| depends on COMMON_CLK_QCOM | |
| help | |
| Support for the multimedia clock controller on msm8960 devices. | |
| Say Y if you want to support multimedia devices such as display, | |
| graphics, video encode/decode, camera, etc. | |
| config MSM_GCC_8974 | |
| tristate "MSM8974 Global Clock Controller" | |
| select QCOM_GDSC | |
| depends on COMMON_CLK_QCOM | |
| help | |
| Support for the global clock controller on msm8974 devices. | |
| Say Y if you want to use peripheral devices such as UART, SPI, | |
| i2c, USB, SD/eMMC, SATA, PCIe, etc. | |
| config MSM_MMCC_8974 | |
| tristate "MSM8974 Multimedia Clock Controller" | |
| select MSM_GCC_8974 | |
| select QCOM_GDSC | |
| depends on COMMON_CLK_QCOM | |
| help | |
| Support for the multimedia clock controller on msm8974 devices. | |
| Say Y if you want to support multimedia devices such as display, | |
| graphics, video encode/decode, camera, etc. | |
| config MSM_GCC_8994 | |
| tristate "MSM8994 Global Clock Controller" | |
| depends on COMMON_CLK_QCOM | |
| help | |
| Support for the global clock controller on msm8994 devices. | |
| Say Y if you want to use peripheral devices such as UART, SPI, | |
| i2c, USB, UFS, SD/eMMC, PCIe, etc. | |
| config MSM_GCC_8996 | |
| tristate "MSM8996 Global Clock Controller" | |
| select QCOM_GDSC | |
| depends on COMMON_CLK_QCOM | |
| help | |
| Support for the global clock controller on msm8996 devices. | |
| Say Y if you want to use peripheral devices such as UART, SPI, | |
| i2c, USB, UFS, SD/eMMC, PCIe, etc. | |
| config MSM_MMCC_8996 | |
| tristate "MSM8996 Multimedia Clock Controller" | |
| select MSM_GCC_8996 | |
| select QCOM_GDSC | |
| depends on COMMON_CLK_QCOM | |
| help | |
| Support for the multimedia clock controller on msm8996 devices. | |
| Say Y if you want to support multimedia devices such as display, | |
| graphics, video encode/decode, camera, etc. | |
| config MSM_GCC_8998 | |
| tristate "MSM8998 Global Clock Controller" | |
| depends on COMMON_CLK_QCOM | |
| help | |
| Support for the global clock controller on msm8998 devices. | |
| Say Y if you want to use peripheral devices such as UART, SPI, | |
| i2c, USB, UFS, SD/eMMC, PCIe, etc. | |
| config SDM_GCC_845 | |
| tristate "SDM845 Global Clock Controller" | |
| select QCOM_GDSC | |
| depends on COMMON_CLK_QCOM | |
| help | |
| Support for the global clock controller on SDM845 devices. | |
| Say Y if you want to use peripheral devices such as UART, SPI, | |
| i2C, USB, UFS, SDDC, PCIe, etc. | |
| config SDM_VIDEOCC_845 | |
| tristate "SDM845 Video Clock Controller" | |
| depends on COMMON_CLK_QCOM | |
| select SDM_GCC_845 | |
| select QCOM_GDSC | |
| help | |
| Support for the video clock controller on SDM845 devices. | |
| Say Y if you want to support video devices and functionality such as | |
| video encode and decode. | |
| config SDM_DISPCC_845 | |
| tristate "SDM845 Display Clock Controller" | |
| select SDM_GCC_845 | |
| depends on COMMON_CLK_QCOM | |
| help | |
| Support for the display clock controller on Qualcomm Technologies, Inc | |
| SDM845 devices. | |
| Say Y if you want to support display devices and functionality such as | |
| splash screen. | |
| config SPMI_PMIC_CLKDIV | |
| tristate "SPMI PMIC clkdiv Support" | |
| depends on (COMMON_CLK_QCOM && SPMI) || COMPILE_TEST | |
| help | |
| This driver supports the clkdiv functionality on the Qualcomm | |
| Technologies, Inc. SPMI PMIC. It configures the frequency of | |
| clkdiv outputs of the PMIC. These clocks are typically wired | |
| through alternate functions on GPIO pins. |