| Kernel driver mlxreg-fan | |
| ======================== | |
| Provides FAN control for the next Mellanox systems: | |
| QMB700, equipped with 40x200GbE InfiniBand ports; | |
| MSN3700, equipped with 32x200GbE or 16x400GbE Ethernet ports; | |
| MSN3410, equipped with 6x400GbE plus 48x50GbE Ethernet ports; | |
| MSN3800, equipped with 64x1000GbE Ethernet ports; | |
| These are the Top of the Rack systems, equipped with Mellanox switch | |
| board with Mellanox Quantum or Spectrume-2 devices. | |
| FAN controller is implemented by the programmable device logic. | |
| The default registers offsets set within the programmable device is as | |
| following: | |
| - pwm1 0xe3 | |
| - fan1 (tacho1) 0xe4 | |
| - fan2 (tacho2) 0xe5 | |
| - fan3 (tacho3) 0xe6 | |
| - fan4 (tacho4) 0xe7 | |
| - fan5 (tacho5) 0xe8 | |
| - fan6 (tacho6) 0xe9 | |
| - fan7 (tacho7) 0xea | |
| - fan8 (tacho8) 0xeb | |
| - fan9 (tacho9) 0xec | |
| - fan10 (tacho10) 0xed | |
| - fan11 (tacho11) 0xee | |
| - fan12 (tacho12) 0xef | |
| This setup can be re-programmed with other registers. | |
| Author: Vadim Pasternak <vadimp@mellanox.com> | |
| Description | |
| ----------- | |
| The driver implements a simple interface for driving a fan connected to | |
| a PWM output and tachometer inputs. | |
| This driver obtains PWM and tachometers registers location according to | |
| the system configuration and creates FAN/PWM hwmon objects and a cooling | |
| device. PWM and tachometers are sensed through the on-board programmable | |
| device, which exports its register map. This device could be attached to | |
| any bus type, for which register mapping is supported. | |
| Single instance is created with one PWM control, up to 12 tachometers and | |
| one cooling device. It could be as many instances as programmable device | |
| supports. | |
| The driver exposes the fan to the user space through the hwmon's and | |
| thermal's sysfs interfaces. | |
| /sys files in hwmon subsystem | |
| ----------------------------- | |
| fan[1-12]_fault - RO files for tachometers TACH1-TACH12 fault indication | |
| fan[1-12]_input - RO files for tachometers TACH1-TACH12 input (in RPM) | |
| pwm1 - RW file for fan[1-12] target duty cycle (0..255) | |
| /sys files in thermal subsystem | |
| ------------------------------- | |
| cur_state - RW file for current cooling state of the cooling device | |
| (0..max_state) | |
| max_state - RO file for maximum cooling state of the cooling device |