| # | |
| # Makefile for the Linux kernel device drivers. | |
| # | |
| # 15 Sep 2000, Christoph Hellwig <hch@infradead.org> | |
| # Rewritten to use lists instead of if-statements. | |
| # | |
| # GPIO must come after pinctrl as gpios may need to mux pins etc | |
| obj-y += pinctrl/ | |
| obj-y += gpio/ | |
| obj-$(CONFIG_PCI) += pci/ | |
| obj-$(CONFIG_PARISC) += parisc/ | |
| obj-$(CONFIG_RAPIDIO) += rapidio/ | |
| obj-y += video/ | |
| obj-y += idle/ | |
| obj-$(CONFIG_ACPI) += acpi/ | |
| obj-$(CONFIG_SFI) += sfi/ | |
| # PnP must come after ACPI since it will eventually need to check if acpi | |
| # was used and do nothing if so | |
| obj-$(CONFIG_PNP) += pnp/ | |
| obj-$(CONFIG_ARM_AMBA) += amba/ | |
| # Many drivers will want to use DMA so this has to be made available | |
| # really early. | |
| obj-$(CONFIG_DMA_ENGINE) += dma/ | |
| obj-$(CONFIG_VIRTIO) += virtio/ | |
| obj-$(CONFIG_XEN) += xen/ | |
| # regulators early, since some subsystems rely on them to initialize | |
| obj-$(CONFIG_REGULATOR) += regulator/ | |
| # tty/ comes before char/ so that the VT console is the boot-time | |
| # default. | |
| obj-y += tty/ | |
| obj-y += char/ | |
| # gpu/ comes after char for AGP vs DRM startup | |
| obj-y += gpu/ | |
| obj-$(CONFIG_CONNECTOR) += connector/ | |
| # i810fb and intelfb depend on char/agp/ | |
| obj-$(CONFIG_FB_I810) += video/i810/ | |
| obj-$(CONFIG_FB_INTEL) += video/intelfb/ | |
| obj-$(CONFIG_PARPORT) += parport/ | |
| obj-y += base/ block/ misc/ mfd/ nfc/ | |
| obj-$(CONFIG_NUBUS) += nubus/ | |
| obj-y += macintosh/ | |
| obj-$(CONFIG_IDE) += ide/ | |
| obj-$(CONFIG_SCSI) += scsi/ | |
| obj-$(CONFIG_ATA) += ata/ | |
| obj-$(CONFIG_TARGET_CORE) += target/ | |
| obj-$(CONFIG_MTD) += mtd/ | |
| obj-$(CONFIG_SPI) += spi/ | |
| obj-y += hsi/ | |
| obj-y += net/ | |
| obj-$(CONFIG_ATM) += atm/ | |
| obj-$(CONFIG_FUSION) += message/ | |
| obj-y += firewire/ | |
| obj-$(CONFIG_UIO) += uio/ | |
| obj-y += cdrom/ | |
| obj-y += auxdisplay/ | |
| obj-$(CONFIG_PCCARD) += pcmcia/ | |
| obj-$(CONFIG_DIO) += dio/ | |
| obj-$(CONFIG_SBUS) += sbus/ | |
| obj-$(CONFIG_ZORRO) += zorro/ | |
| obj-$(CONFIG_MAC) += macintosh/ | |
| obj-$(CONFIG_ATA_OVER_ETH) += block/aoe/ | |
| obj-$(CONFIG_PARIDE) += block/paride/ | |
| obj-$(CONFIG_TC) += tc/ | |
| obj-$(CONFIG_UWB) += uwb/ | |
| obj-$(CONFIG_USB_OTG_UTILS) += usb/ | |
| obj-$(CONFIG_USB) += usb/ | |
| obj-$(CONFIG_PCI) += usb/ | |
| obj-$(CONFIG_USB_GADGET) += usb/ | |
| obj-$(CONFIG_SERIO) += input/serio/ | |
| obj-$(CONFIG_GAMEPORT) += input/gameport/ | |
| obj-$(CONFIG_INPUT) += input/ | |
| obj-$(CONFIG_I2O) += message/ | |
| obj-$(CONFIG_RTC_LIB) += rtc/ | |
| obj-y += i2c/ media/ | |
| obj-$(CONFIG_PPS) += pps/ | |
| obj-$(CONFIG_PTP_1588_CLOCK) += ptp/ | |
| obj-$(CONFIG_W1) += w1/ | |
| obj-$(CONFIG_POWER_SUPPLY) += power/ | |
| obj-$(CONFIG_HWMON) += hwmon/ | |
| obj-$(CONFIG_THERMAL) += thermal/ | |
| obj-$(CONFIG_WATCHDOG) += watchdog/ | |
| obj-$(CONFIG_MD) += md/ | |
| obj-$(CONFIG_BT) += bluetooth/ | |
| obj-$(CONFIG_ACCESSIBILITY) += accessibility/ | |
| obj-$(CONFIG_ISDN) += isdn/ | |
| obj-$(CONFIG_EDAC) += edac/ | |
| obj-$(CONFIG_MCA) += mca/ | |
| obj-$(CONFIG_EISA) += eisa/ | |
| obj-y += lguest/ | |
| obj-$(CONFIG_CPU_FREQ) += cpufreq/ | |
| obj-$(CONFIG_CPU_IDLE) += cpuidle/ | |
| obj-y += mmc/ | |
| obj-$(CONFIG_MEMSTICK) += memstick/ | |
| obj-y += leds/ | |
| obj-$(CONFIG_INFINIBAND) += infiniband/ | |
| obj-$(CONFIG_SGI_SN) += sn/ | |
| obj-y += firmware/ | |
| obj-$(CONFIG_CRYPTO) += crypto/ | |
| obj-$(CONFIG_SUPERH) += sh/ | |
| obj-$(CONFIG_ARCH_SHMOBILE) += sh/ | |
| ifndef CONFIG_ARCH_USES_GETTIMEOFFSET | |
| obj-y += clocksource/ | |
| endif | |
| obj-$(CONFIG_DCA) += dca/ | |
| obj-$(CONFIG_HID) += hid/ | |
| obj-$(CONFIG_PPC_PS3) += ps3/ | |
| obj-$(CONFIG_OF) += of/ | |
| obj-$(CONFIG_SSB) += ssb/ | |
| obj-$(CONFIG_BCMA) += bcma/ | |
| obj-$(CONFIG_VHOST_NET) += vhost/ | |
| obj-$(CONFIG_VLYNQ) += vlynq/ | |
| obj-$(CONFIG_STAGING) += staging/ | |
| obj-y += platform/ | |
| obj-y += ieee802154/ | |
| #common clk code | |
| obj-y += clk/ | |
| obj-$(CONFIG_HWSPINLOCK) += hwspinlock/ | |
| obj-$(CONFIG_NFC) += nfc/ | |
| obj-$(CONFIG_IOMMU_SUPPORT) += iommu/ | |
| obj-$(CONFIG_REMOTEPROC) += remoteproc/ | |
| obj-$(CONFIG_RPMSG) += rpmsg/ | |
| # Virtualization drivers | |
| obj-$(CONFIG_VIRT_DRIVERS) += virt/ | |
| obj-$(CONFIG_HYPERV) += hv/ | |
| obj-$(CONFIG_PM_DEVFREQ) += devfreq/ |