| /* | 
 |  * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ | 
 |  * | 
 |  * This program is free software; you can redistribute it and/or modify | 
 |  * it under the terms of the GNU General Public License version 2 as | 
 |  * published by the Free Software Foundation. | 
 |  */ | 
 | /dts-v1/; | 
 |  | 
 | /include/ "am33xx.dtsi" | 
 |  | 
 | / { | 
 | 	model = "TI AM335x EVM"; | 
 | 	compatible = "ti,am335x-evm", "ti,am33xx"; | 
 |  | 
 | 	cpus { | 
 | 		cpu@0 { | 
 | 			cpu0-supply = <&vdd1_reg>; | 
 | 		}; | 
 | 	}; | 
 |  | 
 | 	memory { | 
 | 		device_type = "memory"; | 
 | 		reg = <0x80000000 0x10000000>; /* 256 MB */ | 
 | 	}; | 
 |  | 
 | 	am33xx_pinmux: pinmux@44e10800 { | 
 | 		pinctrl-names = "default"; | 
 | 		pinctrl-0 = <&matrix_keypad_s0 &volume_keys_s0>; | 
 |  | 
 | 		matrix_keypad_s0: matrix_keypad_s0 { | 
 | 			pinctrl-single,pins = < | 
 | 				0x54 0x7	/* gpmc_a5.gpio1_21, OUTPUT | MODE7 */ | 
 | 				0x58 0x7	/* gpmc_a6.gpio1_22, OUTPUT | MODE7 */ | 
 | 				0x64 0x27	/* gpmc_a9.gpio1_25, INPUT | MODE7 */ | 
 | 				0x68 0x27	/* gpmc_a10.gpio1_26, INPUT | MODE7 */ | 
 | 				0x6c 0x27	/* gpmc_a11.gpio1_27, INPUT | MODE7 */ | 
 | 			>; | 
 | 		}; | 
 |  | 
 | 		volume_keys_s0: volume_keys_s0 { | 
 | 			pinctrl-single,pins = < | 
 | 				0x150 0x27	/* spi0_sclk.gpio0_2, INPUT | MODE7 */ | 
 | 				0x154 0x27	/* spi0_d0.gpio0_3, INPUT | MODE7 */ | 
 | 			>; | 
 | 		}; | 
 | 	}; | 
 |  | 
 | 	ocp { | 
 | 		uart1: serial@44e09000 { | 
 | 			status = "okay"; | 
 | 		}; | 
 |  | 
 | 		i2c1: i2c@44e0b000 { | 
 | 			status = "okay"; | 
 | 			clock-frequency = <400000>; | 
 |  | 
 | 			tps: tps@2d { | 
 | 				reg = <0x2d>; | 
 | 			}; | 
 | 		}; | 
 |  | 
 | 		i2c2: i2c@4802a000 { | 
 | 			status = "okay"; | 
 | 			clock-frequency = <100000>; | 
 |  | 
 | 			lis331dlh: lis331dlh@18 { | 
 | 				compatible = "st,lis331dlh", "st,lis3lv02d"; | 
 | 				reg = <0x18>; | 
 | 				Vdd-supply = <&lis3_reg>; | 
 | 				Vdd_IO-supply = <&lis3_reg>; | 
 |  | 
 | 				st,click-single-x; | 
 | 				st,click-single-y; | 
 | 				st,click-single-z; | 
 | 				st,click-thresh-x = <10>; | 
 | 				st,click-thresh-y = <10>; | 
 | 				st,click-thresh-z = <10>; | 
 | 				st,irq1-click; | 
 | 				st,irq2-click; | 
 | 				st,wakeup-x-lo; | 
 | 				st,wakeup-x-hi; | 
 | 				st,wakeup-y-lo; | 
 | 				st,wakeup-y-hi; | 
 | 				st,wakeup-z-lo; | 
 | 				st,wakeup-z-hi; | 
 | 				st,min-limit-x = <120>; | 
 | 				st,min-limit-y = <120>; | 
 | 				st,min-limit-z = <140>; | 
 | 				st,max-limit-x = <550>; | 
 | 				st,max-limit-y = <550>; | 
 | 				st,max-limit-z = <750>; | 
 | 			}; | 
 |  | 
 | 			tsl2550: tsl2550@39 { | 
 | 				compatible = "taos,tsl2550"; | 
 | 				reg = <0x39>; | 
 | 			}; | 
 |  | 
 | 			tmp275: tmp275@48 { | 
 | 				compatible = "ti,tmp275"; | 
 | 				reg = <0x48>; | 
 | 			}; | 
 | 		}; | 
 | 	}; | 
 |  | 
 | 	vbat: fixedregulator@0 { | 
 | 		compatible = "regulator-fixed"; | 
 | 		regulator-name = "vbat"; | 
 | 		regulator-min-microvolt = <5000000>; | 
 | 		regulator-max-microvolt = <5000000>; | 
 | 		regulator-boot-on; | 
 | 	}; | 
 |  | 
 | 	lis3_reg: fixedregulator@1 { | 
 | 		compatible = "regulator-fixed"; | 
 | 		regulator-name = "lis3_reg"; | 
 | 		regulator-boot-on; | 
 | 	}; | 
 |  | 
 | 	matrix_keypad: matrix_keypad@0 { | 
 | 		compatible = "gpio-matrix-keypad"; | 
 | 		debounce-delay-ms = <5>; | 
 | 		col-scan-delay-us = <2>; | 
 |  | 
 | 		row-gpios = <&gpio2 25 0	/* Bank1, pin25 */ | 
 | 			     &gpio2 26 0	/* Bank1, pin26 */ | 
 | 			     &gpio2 27 0>;	/* Bank1, pin27 */ | 
 |  | 
 | 		col-gpios = <&gpio2 21 0	/* Bank1, pin21 */ | 
 | 			     &gpio2 22 0>;	/* Bank1, pin22 */ | 
 |  | 
 | 		linux,keymap = <0x0000008b	/* MENU */ | 
 | 				0x0100009e	/* BACK */ | 
 | 				0x02000069	/* LEFT */ | 
 | 				0x0001006a	/* RIGHT */ | 
 | 				0x0101001c	/* ENTER */ | 
 | 				0x0201006c>;	/* DOWN */ | 
 | 	}; | 
 |  | 
 | 	gpio_keys: volume_keys@0 { | 
 | 		compatible = "gpio-keys"; | 
 | 		#address-cells = <1>; | 
 | 		#size-cells = <0>; | 
 | 		autorepeat; | 
 |  | 
 | 		switch@9 { | 
 | 			label = "volume-up"; | 
 | 			linux,code = <115>; | 
 | 			gpios = <&gpio1 2 1>; | 
 | 			gpio-key,wakeup; | 
 | 		}; | 
 |  | 
 | 		switch@10 { | 
 | 			label = "volume-down"; | 
 | 			linux,code = <114>; | 
 | 			gpios = <&gpio1 3 1>; | 
 | 			gpio-key,wakeup; | 
 | 		}; | 
 | 	}; | 
 | }; | 
 |  | 
 | /include/ "tps65910.dtsi" | 
 |  | 
 | &tps { | 
 | 	vcc1-supply = <&vbat>; | 
 | 	vcc2-supply = <&vbat>; | 
 | 	vcc3-supply = <&vbat>; | 
 | 	vcc4-supply = <&vbat>; | 
 | 	vcc5-supply = <&vbat>; | 
 | 	vcc6-supply = <&vbat>; | 
 | 	vcc7-supply = <&vbat>; | 
 | 	vccio-supply = <&vbat>; | 
 |  | 
 | 	regulators { | 
 | 		vrtc_reg: regulator@0 { | 
 | 			regulator-always-on; | 
 | 		}; | 
 |  | 
 | 		vio_reg: regulator@1 { | 
 | 			regulator-always-on; | 
 | 		}; | 
 |  | 
 | 		vdd1_reg: regulator@2 { | 
 | 			/* VDD_MPU voltage limits 0.95V - 1.26V with +/-4% tolerance */ | 
 | 			regulator-name = "vdd_mpu"; | 
 | 			regulator-min-microvolt = <912500>; | 
 | 			regulator-max-microvolt = <1312500>; | 
 | 			regulator-boot-on; | 
 | 			regulator-always-on; | 
 | 		}; | 
 |  | 
 | 		vdd2_reg: regulator@3 { | 
 | 			/* VDD_CORE voltage limits 0.95V - 1.1V with +/-4% tolerance */ | 
 | 			regulator-name = "vdd_core"; | 
 | 			regulator-min-microvolt = <912500>; | 
 | 			regulator-max-microvolt = <1150000>; | 
 | 			regulator-boot-on; | 
 | 			regulator-always-on; | 
 | 		}; | 
 |  | 
 | 		vdd3_reg: regulator@4 { | 
 | 			regulator-always-on; | 
 | 		}; | 
 |  | 
 | 		vdig1_reg: regulator@5 { | 
 | 			regulator-always-on; | 
 | 		}; | 
 |  | 
 | 		vdig2_reg: regulator@6 { | 
 | 			regulator-always-on; | 
 | 		}; | 
 |  | 
 | 		vpll_reg: regulator@7 { | 
 | 			regulator-always-on; | 
 | 		}; | 
 |  | 
 | 		vdac_reg: regulator@8 { | 
 | 			regulator-always-on; | 
 | 		}; | 
 |  | 
 | 		vaux1_reg: regulator@9 { | 
 | 			regulator-always-on; | 
 | 		}; | 
 |  | 
 | 		vaux2_reg: regulator@10 { | 
 | 			regulator-always-on; | 
 | 		}; | 
 |  | 
 | 		vaux33_reg: regulator@11 { | 
 | 			regulator-always-on; | 
 | 		}; | 
 |  | 
 | 		vmmc_reg: regulator@12 { | 
 | 			regulator-always-on; | 
 | 		}; | 
 | 	}; | 
 | }; | 
 |  | 
 | &cpsw_emac0 { | 
 | 	phy_id = <&davinci_mdio>, <0>; | 
 | }; | 
 |  | 
 | &cpsw_emac1 { | 
 | 	phy_id = <&davinci_mdio>, <1>; | 
 | }; |