| #include "headers.h" | |
| #include <linux/usb/ch9.h> | |
| static struct usb_device_id InterfaceUsbtable[] = { | |
| { USB_DEVICE(BCM_USB_VENDOR_ID_T3, BCM_USB_PRODUCT_ID_T3) }, | |
| { USB_DEVICE(BCM_USB_VENDOR_ID_T3, BCM_USB_PRODUCT_ID_T3B) }, | |
| { USB_DEVICE(BCM_USB_VENDOR_ID_T3, BCM_USB_PRODUCT_ID_T3L) }, | |
| { USB_DEVICE(BCM_USB_VENDOR_ID_T3, BCM_USB_PRODUCT_ID_SYM) }, | |
| { USB_DEVICE(BCM_USB_VENDOR_ID_ZTE, BCM_USB_PRODUCT_ID_226) }, | |
| { USB_DEVICE(BCM_USB_VENDOR_ID_FOXCONN, BCM_USB_PRODUCT_ID_1901) }, | |
| { USB_DEVICE(BCM_USB_VENDOR_ID_ZTE, BCM_USB_PRODUCT_ID_ZTE_TU25) }, | |
| { USB_DEVICE(BCM_USB_VENDOR_ID_ZTE, BCM_USB_PRODUCT_ID_ZTE_226) }, | |
| { USB_DEVICE(BCM_USB_VENDOR_ID_ZTE, BCM_USB_PRODUCT_ID_ZTE_326) }, | |
| { } | |
| }; | |
| MODULE_DEVICE_TABLE(usb, InterfaceUsbtable); | |
| static int debug = -1; | |
| module_param(debug, uint, 0600); | |
| MODULE_PARM_DESC(debug, "Debug level (0=none,...,16=all)"); | |
| static const u32 default_msg = | |
| NETIF_MSG_DRV | NETIF_MSG_PROBE | NETIF_MSG_LINK | |
| | NETIF_MSG_TIMER | NETIF_MSG_TX_ERR | NETIF_MSG_RX_ERR | |
| | NETIF_MSG_IFUP | NETIF_MSG_IFDOWN; | |
| static int InterfaceAdapterInit(struct bcm_interface_adapter *Adapter); | |
| static void InterfaceAdapterFree(struct bcm_interface_adapter *psIntfAdapter) | |
| { | |
| int i = 0; | |
| struct bcm_mini_adapter *ps_ad = psIntfAdapter->psAdapter; | |
| /* Wake up the wait_queue... */ | |
| if (ps_ad->LEDInfo.led_thread_running & | |
| BCM_LED_THREAD_RUNNING_ACTIVELY) { | |
| ps_ad->DriverState = DRIVER_HALT; | |
| wake_up(&ps_ad->LEDInfo.notify_led_event); | |
| } | |
| reset_card_proc(ps_ad); | |
| /* | |
| * worst case time taken by the RDM/WRM will be 5 sec. will check after | |
| * every 100 ms to accertain the device is not being accessed. After | |
| * this No RDM/WRM should be made. | |
| */ | |
| while (ps_ad->DeviceAccess) { | |
| BCM_DEBUG_PRINT(ps_ad, DBG_TYPE_INITEXIT, DRV_ENTRY, | |
| DBG_LVL_ALL, "Device is being accessed.\n"); | |
| msleep(100); | |
| } | |
| /* Free interrupt URB */ | |
| /* ps_ad->device_removed = TRUE; */ | |
| usb_free_urb(psIntfAdapter->psInterruptUrb); | |
| /* Free transmit URBs */ | |
| for (i = 0; i < MAXIMUM_USB_TCB; i++) { | |
| if (psIntfAdapter->asUsbTcb[i].urb != NULL) { | |
| usb_free_urb(psIntfAdapter->asUsbTcb[i].urb); | |
| psIntfAdapter->asUsbTcb[i].urb = NULL; | |
| } | |
| } | |
| /* Free receive URB and buffers */ | |
| for (i = 0; i < MAXIMUM_USB_RCB; i++) { | |
| if (psIntfAdapter->asUsbRcb[i].urb != NULL) { | |
| kfree(psIntfAdapter->asUsbRcb[i].urb->transfer_buffer); | |
| usb_free_urb(psIntfAdapter->asUsbRcb[i].urb); | |
| psIntfAdapter->asUsbRcb[i].urb = NULL; | |
| } | |
| } | |
| AdapterFree(ps_ad); | |
| } | |
| static void ConfigureEndPointTypesThroughEEPROM( | |
| struct bcm_mini_adapter *Adapter) | |
| { | |
| u32 ulReg; | |
| int bytes; | |
| struct bcm_interface_adapter *interfaceAdapter; | |
| /* Program EP2 MAX_PKT_SIZE */ | |
| ulReg = ntohl(EP2_MPS_REG); | |
| BeceemEEPROMBulkWrite(Adapter, (PUCHAR)&ulReg, 0x128, 4, TRUE); | |
| ulReg = ntohl(EP2_MPS); | |
| BeceemEEPROMBulkWrite(Adapter, (PUCHAR)&ulReg, 0x12C, 4, TRUE); | |
| ulReg = ntohl(EP2_CFG_REG); | |
| BeceemEEPROMBulkWrite(Adapter, (PUCHAR)&ulReg, 0x132, 4, TRUE); | |
| interfaceAdapter = | |
| (struct bcm_interface_adapter *)(Adapter->pvInterfaceAdapter); | |
| if (interfaceAdapter->bHighSpeedDevice) { | |
| ulReg = ntohl(EP2_CFG_INT); | |
| BeceemEEPROMBulkWrite(Adapter, (PUCHAR)&ulReg, 0x136, 4, TRUE); | |
| } else { | |
| /* USE BULK EP as TX in FS mode. */ | |
| ulReg = ntohl(EP2_CFG_BULK); | |
| BeceemEEPROMBulkWrite(Adapter, (PUCHAR)&ulReg, 0x136, 4, TRUE); | |
| } | |
| /* Program EP4 MAX_PKT_SIZE. */ | |
| ulReg = ntohl(EP4_MPS_REG); | |
| BeceemEEPROMBulkWrite(Adapter, (PUCHAR)&ulReg, 0x13C, 4, TRUE); | |
| ulReg = ntohl(EP4_MPS); | |
| BeceemEEPROMBulkWrite(Adapter, (PUCHAR)&ulReg, 0x140, 4, TRUE); | |
| /* Program TX EP as interrupt(Alternate Setting) */ | |
| bytes = rdmalt(Adapter, 0x0F0110F8, &ulReg, sizeof(u32)); | |
| if (bytes < 0) { | |
| BCM_DEBUG_PRINT(Adapter, DBG_TYPE_INITEXIT, DRV_ENTRY, | |
| DBG_LVL_ALL, "reading of Tx EP failed\n"); | |
| return; | |
| } | |
| ulReg |= 0x6; | |
| ulReg = ntohl(ulReg); | |
| BeceemEEPROMBulkWrite(Adapter, (PUCHAR)&ulReg, 0x1CC, 4, TRUE); | |
| ulReg = ntohl(EP4_CFG_REG); | |
| BeceemEEPROMBulkWrite(Adapter, (PUCHAR)&ulReg, 0x1C8, 4, TRUE); | |
| /* Program ISOCHRONOUS EP size to zero. */ | |
| ulReg = ntohl(ISO_MPS_REG); | |
| BeceemEEPROMBulkWrite(Adapter, (PUCHAR)&ulReg, 0x1D2, 4, TRUE); | |
| ulReg = ntohl(ISO_MPS); | |
| BeceemEEPROMBulkWrite(Adapter, (PUCHAR)&ulReg, 0x1D6, 4, TRUE); | |
| /* | |
| * Update EEPROM Version. | |
| * Read 4 bytes from 508 and modify 511 and 510. | |
| */ | |
| ReadBeceemEEPROM(Adapter, 0x1FC, &ulReg); | |
| ulReg &= 0x0101FFFF; | |
| BeceemEEPROMBulkWrite(Adapter, (PUCHAR)&ulReg, 0x1FC, 4, TRUE); | |
| /* | |
| * Update length field if required. | |
| * Also make the string NULL terminated. | |
| */ | |
| ReadBeceemEEPROM(Adapter, 0xA8, &ulReg); | |
| if ((ulReg&0x00FF0000)>>16 > 0x30) { | |
| ulReg = (ulReg&0xFF00FFFF)|(0x30<<16); | |
| BeceemEEPROMBulkWrite(Adapter, (PUCHAR)&ulReg, 0xA8, 4, TRUE); | |
| } | |
| ReadBeceemEEPROM(Adapter, 0x148, &ulReg); | |
| if ((ulReg&0x00FF0000)>>16 > 0x30) { | |
| ulReg = (ulReg&0xFF00FFFF)|(0x30<<16); | |
| BeceemEEPROMBulkWrite(Adapter, (PUCHAR)&ulReg, 0x148, 4, TRUE); | |
| } | |
| ulReg = 0; | |
| BeceemEEPROMBulkWrite(Adapter, (PUCHAR)&ulReg, 0x122, 4, TRUE); | |
| ulReg = 0; | |
| BeceemEEPROMBulkWrite(Adapter, (PUCHAR)&ulReg, 0x1C2, 4, TRUE); | |
| } | |
| static int usbbcm_device_probe(struct usb_interface *intf, | |
| const struct usb_device_id *id) | |
| { | |
| struct usb_device *udev = interface_to_usbdev(intf); | |
| int retval; | |
| struct bcm_mini_adapter *psAdapter; | |
| struct bcm_interface_adapter *psIntfAdapter; | |
| struct net_device *ndev; | |
| /* Reserve one extra queue for the bit-bucket */ | |
| ndev = alloc_etherdev_mq(sizeof(struct bcm_mini_adapter), | |
| NO_OF_QUEUES + 1); | |
| if (ndev == NULL) { | |
| dev_err(&udev->dev, DRV_NAME ": no memory for device\n"); | |
| return -ENOMEM; | |
| } | |
| SET_NETDEV_DEV(ndev, &intf->dev); | |
| psAdapter = netdev_priv(ndev); | |
| psAdapter->dev = ndev; | |
| psAdapter->msg_enable = netif_msg_init(debug, default_msg); | |
| /* Init default driver debug state */ | |
| psAdapter->stDebugState.debug_level = DBG_LVL_CURR; | |
| psAdapter->stDebugState.type = DBG_TYPE_INITEXIT; | |
| /* | |
| * Technically, one can start using BCM_DEBUG_PRINT after this point. | |
| * However, realize that by default the Type/Subtype bitmaps are all | |
| * zero now; so no prints will actually appear until the TestApp turns | |
| * on debug paths via the ioctl(); so practically speaking, in early | |
| * init, no logging happens. | |
| * | |
| * A solution (used below): we explicitly set the bitmaps to 1 for | |
| * Type=DBG_TYPE_INITEXIT and ALL subtype's of the same. Now all bcm | |
| * debug statements get logged, enabling debug during early init. | |
| * Further, we turn this OFF once init_module() completes. | |
| */ | |
| psAdapter->stDebugState.subtype[DBG_TYPE_INITEXIT] = 0xff; | |
| BCM_SHOW_DEBUG_BITMAP(psAdapter); | |
| retval = InitAdapter(psAdapter); | |
| if (retval) { | |
| dev_err(&udev->dev, DRV_NAME ": InitAdapter Failed\n"); | |
| AdapterFree(psAdapter); | |
| return retval; | |
| } | |
| /* Allocate interface adapter structure */ | |
| psIntfAdapter = kzalloc(sizeof(struct bcm_interface_adapter), | |
| GFP_KERNEL); | |
| if (psIntfAdapter == NULL) { | |
| AdapterFree(psAdapter); | |
| return -ENOMEM; | |
| } | |
| psAdapter->pvInterfaceAdapter = psIntfAdapter; | |
| psIntfAdapter->psAdapter = psAdapter; | |
| /* Store usb interface in Interface Adapter */ | |
| psIntfAdapter->interface = intf; | |
| usb_set_intfdata(intf, psIntfAdapter); | |
| BCM_DEBUG_PRINT(psAdapter, DBG_TYPE_INITEXIT, DRV_ENTRY, DBG_LVL_ALL, | |
| "psIntfAdapter 0x%p\n", psIntfAdapter); | |
| retval = InterfaceAdapterInit(psIntfAdapter); | |
| if (retval) { | |
| /* If the Firmware/Cfg File is not present | |
| * then return success, let the application | |
| * download the files. | |
| */ | |
| if (-ENOENT == retval) { | |
| BCM_DEBUG_PRINT(psAdapter, DBG_TYPE_INITEXIT, DRV_ENTRY, | |
| DBG_LVL_ALL, | |
| "File Not Found. Use app to download.\n"); | |
| return STATUS_SUCCESS; | |
| } | |
| BCM_DEBUG_PRINT(psAdapter, DBG_TYPE_INITEXIT, DRV_ENTRY, | |
| DBG_LVL_ALL, "InterfaceAdapterInit failed.\n"); | |
| usb_set_intfdata(intf, NULL); | |
| udev = interface_to_usbdev(intf); | |
| usb_put_dev(udev); | |
| InterfaceAdapterFree(psIntfAdapter); | |
| return retval; | |
| } | |
| if (psAdapter->chip_id > T3) { | |
| uint32_t uiNackZeroLengthInt = 4; | |
| retval = | |
| wrmalt(psAdapter, DISABLE_USB_ZERO_LEN_INT, | |
| &uiNackZeroLengthInt, | |
| sizeof(uiNackZeroLengthInt)); | |
| if (retval) | |
| return retval; | |
| } | |
| /* Check whether the USB-Device Supports remote Wake-Up */ | |
| if (USB_CONFIG_ATT_WAKEUP & udev->actconfig->desc.bmAttributes) { | |
| /* If Suspend then only support dynamic suspend */ | |
| if (psAdapter->bDoSuspend) { | |
| #ifdef CONFIG_PM | |
| pm_runtime_set_autosuspend_delay(&udev->dev, 0); | |
| intf->needs_remote_wakeup = 1; | |
| usb_enable_autosuspend(udev); | |
| device_init_wakeup(&intf->dev, 1); | |
| INIT_WORK(&psIntfAdapter->usbSuspendWork, | |
| putUsbSuspend); | |
| BCM_DEBUG_PRINT(psAdapter, DBG_TYPE_INITEXIT, DRV_ENTRY, | |
| DBG_LVL_ALL, | |
| "Enabling USB Auto-Suspend\n"); | |
| #endif | |
| } else { | |
| intf->needs_remote_wakeup = 0; | |
| usb_disable_autosuspend(udev); | |
| } | |
| } | |
| psAdapter->stDebugState.subtype[DBG_TYPE_INITEXIT] = 0x0; | |
| return retval; | |
| } | |
| static void usbbcm_disconnect(struct usb_interface *intf) | |
| { | |
| struct bcm_interface_adapter *psIntfAdapter = usb_get_intfdata(intf); | |
| struct bcm_mini_adapter *psAdapter; | |
| struct usb_device *udev = interface_to_usbdev(intf); | |
| if (psIntfAdapter == NULL) | |
| return; | |
| psAdapter = psIntfAdapter->psAdapter; | |
| netif_device_detach(psAdapter->dev); | |
| if (psAdapter->bDoSuspend) | |
| intf->needs_remote_wakeup = 0; | |
| psAdapter->device_removed = TRUE; | |
| usb_set_intfdata(intf, NULL); | |
| InterfaceAdapterFree(psIntfAdapter); | |
| usb_put_dev(udev); | |
| } | |
| static int AllocUsbCb(struct bcm_interface_adapter *psIntfAdapter) | |
| { | |
| int i = 0; | |
| for (i = 0; i < MAXIMUM_USB_TCB; i++) { | |
| psIntfAdapter->asUsbTcb[i].urb = usb_alloc_urb(0, GFP_KERNEL); | |
| if (psIntfAdapter->asUsbTcb[i].urb == NULL) { | |
| BCM_DEBUG_PRINT(psIntfAdapter->psAdapter, | |
| DBG_TYPE_PRINTK, 0, 0, | |
| "Can't allocate Tx urb for index %d\n", | |
| i); | |
| return -ENOMEM; | |
| } | |
| } | |
| for (i = 0; i < MAXIMUM_USB_RCB; i++) { | |
| psIntfAdapter->asUsbRcb[i].urb = usb_alloc_urb(0, GFP_KERNEL); | |
| if (psIntfAdapter->asUsbRcb[i].urb == NULL) { | |
| BCM_DEBUG_PRINT(psIntfAdapter->psAdapter, | |
| DBG_TYPE_PRINTK, 0, 0, | |
| "Can't allocate Rx urb for index %d\n", | |
| i); | |
| return -ENOMEM; | |
| } | |
| psIntfAdapter->asUsbRcb[i].urb->transfer_buffer = | |
| kmalloc(MAX_DATA_BUFFER_SIZE, GFP_KERNEL); | |
| if (psIntfAdapter->asUsbRcb[i].urb->transfer_buffer == NULL) { | |
| BCM_DEBUG_PRINT(psIntfAdapter->psAdapter, | |
| DBG_TYPE_PRINTK, 0, 0, | |
| "Can't allocate Rx buffer for index %d\n", | |
| i); | |
| return -ENOMEM; | |
| } | |
| psIntfAdapter->asUsbRcb[i].urb->transfer_buffer_length = | |
| MAX_DATA_BUFFER_SIZE; | |
| } | |
| return 0; | |
| } | |
| static int device_run(struct bcm_interface_adapter *psIntfAdapter) | |
| { | |
| int value = 0; | |
| UINT status = STATUS_SUCCESS; | |
| struct bcm_mini_adapter *psAd = psIntfAdapter->psAdapter; | |
| status = InitCardAndDownloadFirmware(psAd); | |
| if (status != STATUS_SUCCESS) { | |
| pr_err(DRV_NAME "InitCardAndDownloadFirmware failed.\n"); | |
| return status; | |
| } | |
| if (psAd->fw_download_done) { | |
| if (StartInterruptUrb(psIntfAdapter)) { | |
| BCM_DEBUG_PRINT(psAd, DBG_TYPE_INITEXIT, DRV_ENTRY, | |
| DBG_LVL_ALL, | |
| "Cannot send interrupt in URB\n"); | |
| } | |
| /* | |
| * now register the cntrl interface. after downloading the f/w | |
| * waiting for 5 sec to get the mailbox interrupt. | |
| */ | |
| psAd->waiting_to_fw_download_done = false; | |
| value = wait_event_timeout(psAd->ioctl_fw_dnld_wait_queue, | |
| psAd->waiting_to_fw_download_done, | |
| 5 * HZ); | |
| if (value == 0) | |
| pr_err(DRV_NAME ": Timeout waiting for mailbox interrupt.\n"); | |
| if (register_control_device_interface(psAd) < 0) { | |
| pr_err(DRV_NAME ": Register Control Device failed.\n"); | |
| return -EIO; | |
| } | |
| } | |
| return 0; | |
| } | |
| static int select_alternate_setting_for_highspeed_modem( | |
| struct bcm_interface_adapter *psIntfAdapter, | |
| struct usb_endpoint_descriptor **endpoint, | |
| const struct usb_host_interface *iface_desc, | |
| int *usedIntOutForBulkTransfer) | |
| { | |
| int retval = 0; | |
| struct bcm_mini_adapter *psAd = psIntfAdapter->psAdapter; | |
| /* selecting alternate setting one as a default setting | |
| * for High Speed modem. */ | |
| if (psIntfAdapter->bHighSpeedDevice) | |
| retval = usb_set_interface(psIntfAdapter->udev, | |
| DEFAULT_SETTING_0, | |
| ALTERNATE_SETTING_1); | |
| BCM_DEBUG_PRINT(psAd, DBG_TYPE_INITEXIT, DRV_ENTRY, DBG_LVL_ALL, | |
| "BCM16 is applicable on this dongle\n"); | |
| if (retval || !psIntfAdapter->bHighSpeedDevice) { | |
| *usedIntOutForBulkTransfer = EP2; | |
| *endpoint = &iface_desc->endpoint[EP2].desc; | |
| BCM_DEBUG_PRINT(psAd, DBG_TYPE_INITEXIT, DRV_ENTRY, DBG_LVL_ALL, | |
| "Interface altsetting failed or modem is configured to Full Speed, hence will work on default setting 0\n"); | |
| /* | |
| * If Modem is high speed device EP2 should be | |
| * INT OUT End point | |
| * | |
| * If Mode is FS then EP2 should be bulk end | |
| * point | |
| */ | |
| if ((psIntfAdapter->bHighSpeedDevice && | |
| !usb_endpoint_is_int_out(*endpoint)) || | |
| (!psIntfAdapter->bHighSpeedDevice && | |
| !usb_endpoint_is_bulk_out(*endpoint))) { | |
| BCM_DEBUG_PRINT(psAd, DBG_TYPE_INITEXIT, DRV_ENTRY, | |
| DBG_LVL_ALL, | |
| "Configuring the EEPROM\n"); | |
| /* change the EP2, EP4 to INT OUT end point */ | |
| ConfigureEndPointTypesThroughEEPROM( | |
| psAd); | |
| /* | |
| * It resets the device and if any thing | |
| * gets changed in USB descriptor it | |
| * will show fail and re-enumerate the | |
| * device | |
| */ | |
| retval = usb_reset_device(psIntfAdapter->udev); | |
| if (retval) { | |
| BCM_DEBUG_PRINT(psAd, DBG_TYPE_INITEXIT, | |
| DRV_ENTRY, DBG_LVL_ALL, | |
| "reset failed. Re-enumerating the device.\n"); | |
| return retval; | |
| } | |
| } | |
| if (!psIntfAdapter->bHighSpeedDevice && | |
| usb_endpoint_is_bulk_out(*endpoint)) { | |
| /* | |
| * Once BULK is selected in FS mode. | |
| * Revert it back to INT. | |
| * Else USB_IF will fail. | |
| */ | |
| UINT _uiData = ntohl(EP2_CFG_INT); | |
| BCM_DEBUG_PRINT(psAd, DBG_TYPE_INITEXIT, DRV_ENTRY, | |
| DBG_LVL_ALL, | |
| "Reverting Bulk to INT as it is in Full Speed mode.\n"); | |
| BeceemEEPROMBulkWrite(psAd, (PUCHAR) & _uiData, 0x136, | |
| 4, TRUE); | |
| } | |
| } else { | |
| *usedIntOutForBulkTransfer = EP4; | |
| *endpoint = &iface_desc->endpoint[EP4].desc; | |
| BCM_DEBUG_PRINT(psAd, DBG_TYPE_INITEXIT, DRV_ENTRY, DBG_LVL_ALL, | |
| "Choosing AltSetting as a default setting.\n"); | |
| if (!usb_endpoint_is_int_out(*endpoint)) { | |
| BCM_DEBUG_PRINT(psAd, DBG_TYPE_INITEXIT, DRV_ENTRY, | |
| DBG_LVL_ALL, | |
| "Dongle does not have BCM16 Fix.\n"); | |
| /* | |
| * change the EP2, EP4 to INT OUT end point and use EP4 | |
| * in altsetting | |
| */ | |
| ConfigureEndPointTypesThroughEEPROM(psAd); | |
| /* | |
| * It resets the device and if any thing | |
| * gets changed in USB descriptor it | |
| * will show fail and re-enumerate the | |
| * device | |
| */ | |
| retval = usb_reset_device(psIntfAdapter->udev); | |
| if (retval) { | |
| BCM_DEBUG_PRINT(psAd, DBG_TYPE_INITEXIT, | |
| DRV_ENTRY, DBG_LVL_ALL, | |
| "reset failed. Re-enumerating the device.\n"); | |
| return retval; | |
| } | |
| } | |
| } | |
| return 0; | |
| } | |
| static int InterfaceAdapterInit(struct bcm_interface_adapter *psIntfAdapter) | |
| { | |
| struct usb_host_interface *iface_desc; | |
| struct usb_endpoint_descriptor *endpoint; | |
| size_t buffer_size; | |
| unsigned long value; | |
| int retval = 0; | |
| int usedIntOutForBulkTransfer = 0; | |
| bool bBcm16 = false; | |
| UINT uiData = 0; | |
| int bytes; | |
| struct bcm_mini_adapter *psAd = psIntfAdapter->psAdapter; | |
| /* Store the usb dev into interface adapter */ | |
| psIntfAdapter->udev = | |
| usb_get_dev(interface_to_usbdev(psIntfAdapter->interface)); | |
| psIntfAdapter->bHighSpeedDevice = | |
| (psIntfAdapter->udev->speed == USB_SPEED_HIGH); | |
| psAd->interface_rdm = BcmRDM; | |
| psAd->interface_wrm = BcmWRM; | |
| bytes = rdmalt(psAd, CHIP_ID_REG, (u32 *) &(psAd->chip_id), | |
| sizeof(u32)); | |
| if (bytes < 0) { | |
| retval = bytes; | |
| BCM_DEBUG_PRINT(psAd, DBG_TYPE_PRINTK, 0, 0, | |
| "CHIP ID Read Failed\n"); | |
| return retval; | |
| } | |
| if (0xbece3200 == (psAd->chip_id & ~(0xF0))) | |
| psAd->chip_id &= ~0xF0; | |
| dev_info(&psIntfAdapter->udev->dev, "RDM Chip ID 0x%lx\n", | |
| psAd->chip_id); | |
| iface_desc = psIntfAdapter->interface->cur_altsetting; | |
| if (psAd->chip_id == T3B) { | |
| /* T3B device will have EEPROM, check if EEPROM is proper and | |
| * BCM16 can be done or not. */ | |
| BeceemEEPROMBulkRead(psAd, &uiData, 0x0, 4); | |
| if (uiData == BECM) | |
| bBcm16 = TRUE; | |
| dev_info(&psIntfAdapter->udev->dev, | |
| "number of alternate setting %d\n", | |
| psIntfAdapter->interface->num_altsetting); | |
| if (bBcm16 == TRUE) { | |
| retval = select_alternate_setting_for_highspeed_modem( | |
| psIntfAdapter, &endpoint, iface_desc, | |
| &usedIntOutForBulkTransfer); | |
| if (retval) | |
| return retval; | |
| } | |
| } | |
| iface_desc = psIntfAdapter->interface->cur_altsetting; | |
| for (value = 0; value < iface_desc->desc.bNumEndpoints; ++value) { | |
| endpoint = &iface_desc->endpoint[value].desc; | |
| if (!psIntfAdapter->sBulkIn.bulk_in_endpointAddr && | |
| usb_endpoint_is_bulk_in(endpoint)) { | |
| buffer_size = le16_to_cpu(endpoint->wMaxPacketSize); | |
| psIntfAdapter->sBulkIn.bulk_in_size = buffer_size; | |
| psIntfAdapter->sBulkIn.bulk_in_endpointAddr = | |
| endpoint->bEndpointAddress; | |
| psIntfAdapter->sBulkIn.bulk_in_pipe = usb_rcvbulkpipe( | |
| psIntfAdapter->udev, | |
| psIntfAdapter->sBulkIn.bulk_in_endpointAddr); | |
| } | |
| if (!psIntfAdapter->sBulkOut.bulk_out_endpointAddr && | |
| usb_endpoint_is_bulk_out(endpoint)) { | |
| psIntfAdapter->sBulkOut.bulk_out_endpointAddr = | |
| endpoint->bEndpointAddress; | |
| psIntfAdapter->sBulkOut.bulk_out_pipe = usb_sndbulkpipe( | |
| psIntfAdapter->udev, | |
| psIntfAdapter->sBulkOut.bulk_out_endpointAddr); | |
| } | |
| if (!psIntfAdapter->sIntrIn.int_in_endpointAddr && | |
| usb_endpoint_is_int_in(endpoint)) { | |
| buffer_size = le16_to_cpu(endpoint->wMaxPacketSize); | |
| psIntfAdapter->sIntrIn.int_in_size = buffer_size; | |
| psIntfAdapter->sIntrIn.int_in_endpointAddr = | |
| endpoint->bEndpointAddress; | |
| psIntfAdapter->sIntrIn.int_in_interval = | |
| endpoint->bInterval; | |
| psIntfAdapter->sIntrIn.int_in_buffer = | |
| kmalloc(buffer_size, GFP_KERNEL); | |
| if (!psIntfAdapter->sIntrIn.int_in_buffer) | |
| return -EINVAL; | |
| } | |
| if (!psIntfAdapter->sIntrOut.int_out_endpointAddr && | |
| usb_endpoint_is_int_out(endpoint)) { | |
| if (!psIntfAdapter->sBulkOut.bulk_out_endpointAddr && | |
| (psAd->chip_id == T3B) && | |
| (value == usedIntOutForBulkTransfer)) { | |
| /* | |
| * use first intout end point as a bulk out end | |
| * point | |
| */ | |
| buffer_size = | |
| le16_to_cpu(endpoint->wMaxPacketSize); | |
| psIntfAdapter->sBulkOut.bulk_out_size = | |
| buffer_size; | |
| psIntfAdapter->sBulkOut.bulk_out_endpointAddr = | |
| endpoint->bEndpointAddress; | |
| psIntfAdapter->sBulkOut.bulk_out_pipe = | |
| usb_sndintpipe(psIntfAdapter->udev, | |
| psIntfAdapter->sBulkOut | |
| .bulk_out_endpointAddr); | |
| psIntfAdapter->sBulkOut.int_out_interval = | |
| endpoint->bInterval; | |
| } else if (value == EP6) { | |
| buffer_size = | |
| le16_to_cpu(endpoint->wMaxPacketSize); | |
| psIntfAdapter->sIntrOut.int_out_size = | |
| buffer_size; | |
| psIntfAdapter->sIntrOut.int_out_endpointAddr = | |
| endpoint->bEndpointAddress; | |
| psIntfAdapter->sIntrOut.int_out_interval = | |
| endpoint->bInterval; | |
| psIntfAdapter->sIntrOut.int_out_buffer = | |
| kmalloc(buffer_size, GFP_KERNEL); | |
| if (!psIntfAdapter->sIntrOut.int_out_buffer) | |
| return -EINVAL; | |
| } | |
| } | |
| } | |
| usb_set_intfdata(psIntfAdapter->interface, psIntfAdapter); | |
| psAd->bcm_file_download = InterfaceFileDownload; | |
| psAd->bcm_file_readback_from_chip = InterfaceFileReadbackFromChip; | |
| psAd->interface_transmit = InterfaceTransmitPacket; | |
| retval = CreateInterruptUrb(psIntfAdapter); | |
| if (retval) { | |
| BCM_DEBUG_PRINT(psAd, DBG_TYPE_PRINTK, 0, 0, | |
| "Cannot create interrupt urb\n"); | |
| return retval; | |
| } | |
| retval = AllocUsbCb(psIntfAdapter); | |
| if (retval) | |
| return retval; | |
| return device_run(psIntfAdapter); | |
| } | |
| static int InterfaceSuspend(struct usb_interface *intf, pm_message_t message) | |
| { | |
| struct bcm_interface_adapter *psIntfAdapter = usb_get_intfdata(intf); | |
| psIntfAdapter->bSuspended = TRUE; | |
| if (psIntfAdapter->bPreparingForBusSuspend) { | |
| psIntfAdapter->bPreparingForBusSuspend = false; | |
| if (psIntfAdapter->psAdapter->LinkStatus == LINKUP_DONE) { | |
| psIntfAdapter->psAdapter->IdleMode = TRUE; | |
| BCM_DEBUG_PRINT(psIntfAdapter->psAdapter, | |
| DBG_TYPE_INITEXIT, DRV_ENTRY, | |
| DBG_LVL_ALL, | |
| "Host Entered in PMU Idle Mode.\n"); | |
| } else { | |
| psIntfAdapter->psAdapter->bShutStatus = TRUE; | |
| BCM_DEBUG_PRINT(psIntfAdapter->psAdapter, | |
| DBG_TYPE_INITEXIT, DRV_ENTRY, | |
| DBG_LVL_ALL, | |
| "Host Entered in PMU Shutdown Mode.\n"); | |
| } | |
| } | |
| psIntfAdapter->psAdapter->bPreparingForLowPowerMode = false; | |
| /* Signaling the control pkt path */ | |
| wake_up(&psIntfAdapter->psAdapter->lowpower_mode_wait_queue); | |
| return 0; | |
| } | |
| static int InterfaceResume(struct usb_interface *intf) | |
| { | |
| struct bcm_interface_adapter *psIntfAdapter = usb_get_intfdata(intf); | |
| mdelay(100); | |
| psIntfAdapter->bSuspended = false; | |
| StartInterruptUrb(psIntfAdapter); | |
| InterfaceRx(psIntfAdapter); | |
| return 0; | |
| } | |
| static struct usb_driver usbbcm_driver = { | |
| .name = "usbbcm", | |
| .probe = usbbcm_device_probe, | |
| .disconnect = usbbcm_disconnect, | |
| .suspend = InterfaceSuspend, | |
| .resume = InterfaceResume, | |
| .id_table = InterfaceUsbtable, | |
| .supports_autosuspend = 1, | |
| }; | |
| struct class *bcm_class; | |
| static __init int bcm_init(void) | |
| { | |
| int retval; | |
| pr_info("%s: %s, %s\n", DRV_NAME, DRV_DESCRIPTION, DRV_VERSION); | |
| pr_info("%s\n", DRV_COPYRIGHT); | |
| bcm_class = class_create(THIS_MODULE, DRV_NAME); | |
| if (IS_ERR(bcm_class)) { | |
| pr_err(DRV_NAME ": could not create class\n"); | |
| return PTR_ERR(bcm_class); | |
| } | |
| retval = usb_register(&usbbcm_driver); | |
| if (retval < 0) { | |
| pr_err(DRV_NAME ": could not register usb driver\n"); | |
| class_destroy(bcm_class); | |
| return retval; | |
| } | |
| return 0; | |
| } | |
| static __exit void bcm_exit(void) | |
| { | |
| usb_deregister(&usbbcm_driver); | |
| class_destroy(bcm_class); | |
| } | |
| module_init(bcm_init); | |
| module_exit(bcm_exit); | |
| MODULE_DESCRIPTION(DRV_DESCRIPTION); | |
| MODULE_VERSION(DRV_VERSION); | |
| MODULE_LICENSE("GPL"); |