| /* | |
| * linux/arch/cris/traps.c | |
| * | |
| * Here we handle the break vectors not used by the system call | |
| * mechanism, as well as some general stack/register dumping | |
| * things. | |
| * | |
| * Copyright (C) 2000-2007 Axis Communications AB | |
| * | |
| * Authors: Bjorn Wesen | |
| * Hans-Peter Nilsson | |
| * | |
| */ | |
| #include <linux/init.h> | |
| #include <linux/module.h> | |
| #include <asm/pgtable.h> | |
| #include <asm/uaccess.h> | |
| #include <arch/system.h> | |
| extern void arch_enable_nmi(void); | |
| extern void stop_watchdog(void); | |
| extern void reset_watchdog(void); | |
| extern void show_registers(struct pt_regs *regs); | |
| #ifdef CONFIG_DEBUG_BUGVERBOSE | |
| extern void handle_BUG(struct pt_regs *regs); | |
| #else | |
| #define handle_BUG(regs) | |
| #endif | |
| static int kstack_depth_to_print = 24; | |
| void (*nmi_handler)(struct pt_regs *); | |
| void | |
| show_trace(unsigned long *stack) | |
| { | |
| unsigned long addr, module_start, module_end; | |
| extern char _stext, _etext; | |
| int i; | |
| printk("\nCall Trace: "); | |
| i = 1; | |
| module_start = VMALLOC_START; | |
| module_end = VMALLOC_END; | |
| while (((long)stack & (THREAD_SIZE-1)) != 0) { | |
| if (__get_user(addr, stack)) { | |
| /* This message matches "failing address" marked | |
| s390 in ksymoops, so lines containing it will | |
| not be filtered out by ksymoops. */ | |
| printk("Failing address 0x%lx\n", (unsigned long)stack); | |
| break; | |
| } | |
| stack++; | |
| /* | |
| * If the address is either in the text segment of the | |
| * kernel, or in the region which contains vmalloc'ed | |
| * memory, it *may* be the address of a calling | |
| * routine; if so, print it so that someone tracing | |
| * down the cause of the crash will be able to figure | |
| * out the call path that was taken. | |
| */ | |
| if (((addr >= (unsigned long)&_stext) && | |
| (addr <= (unsigned long)&_etext)) || | |
| ((addr >= module_start) && (addr <= module_end))) { | |
| if (i && ((i % 8) == 0)) | |
| printk("\n "); | |
| printk("[<%08lx>] ", addr); | |
| i++; | |
| } | |
| } | |
| } | |
| /* | |
| * These constants are for searching for possible module text | |
| * segments. MODULE_RANGE is a guess of how much space is likely | |
| * to be vmalloced. | |
| */ | |
| #define MODULE_RANGE (8*1024*1024) | |
| /* | |
| * The output (format, strings and order) is adjusted to be usable with | |
| * ksymoops-2.4.1 with some necessary CRIS-specific patches. Please don't | |
| * change it unless you're serious about adjusting ksymoops and syncing | |
| * with the ksymoops maintainer. | |
| */ | |
| void | |
| show_stack(struct task_struct *task, unsigned long *sp) | |
| { | |
| unsigned long *stack, addr; | |
| int i; | |
| /* | |
| * debugging aid: "show_stack(NULL);" prints a | |
| * back trace. | |
| */ | |
| if (sp == NULL) { | |
| if (task) | |
| sp = (unsigned long*)task->thread.ksp; | |
| else | |
| sp = (unsigned long*)rdsp(); | |
| } | |
| stack = sp; | |
| printk("\nStack from %08lx:\n ", (unsigned long)stack); | |
| for (i = 0; i < kstack_depth_to_print; i++) { | |
| if (((long)stack & (THREAD_SIZE-1)) == 0) | |
| break; | |
| if (i && ((i % 8) == 0)) | |
| printk("\n "); | |
| if (__get_user(addr, stack)) { | |
| /* This message matches "failing address" marked | |
| s390 in ksymoops, so lines containing it will | |
| not be filtered out by ksymoops. */ | |
| printk("Failing address 0x%lx\n", (unsigned long)stack); | |
| break; | |
| } | |
| stack++; | |
| printk("%08lx ", addr); | |
| } | |
| show_trace(sp); | |
| } | |
| #if 0 | |
| /* displays a short stack trace */ | |
| int | |
| show_stack(void) | |
| { | |
| unsigned long *sp = (unsigned long *)rdusp(); | |
| int i; | |
| printk("Stack dump [0x%08lx]:\n", (unsigned long)sp); | |
| for (i = 0; i < 16; i++) | |
| printk("sp + %d: 0x%08lx\n", i*4, sp[i]); | |
| return 0; | |
| } | |
| #endif | |
| void | |
| set_nmi_handler(void (*handler)(struct pt_regs *)) | |
| { | |
| nmi_handler = handler; | |
| arch_enable_nmi(); | |
| } | |
| #ifdef CONFIG_DEBUG_NMI_OOPS | |
| void | |
| oops_nmi_handler(struct pt_regs *regs) | |
| { | |
| stop_watchdog(); | |
| oops_in_progress = 1; | |
| printk("NMI!\n"); | |
| show_registers(regs); | |
| oops_in_progress = 0; | |
| } | |
| static int __init | |
| oops_nmi_register(void) | |
| { | |
| set_nmi_handler(oops_nmi_handler); | |
| return 0; | |
| } | |
| __initcall(oops_nmi_register); | |
| #endif | |
| /* | |
| * This gets called from entry.S when the watchdog has bitten. Show something | |
| * similar to an Oops dump, and if the kernel is configured to be a nice | |
| * doggy, then halt instead of reboot. | |
| */ | |
| void | |
| watchdog_bite_hook(struct pt_regs *regs) | |
| { | |
| #ifdef CONFIG_ETRAX_WATCHDOG_NICE_DOGGY | |
| local_irq_disable(); | |
| stop_watchdog(); | |
| show_registers(regs); | |
| while (1) | |
| ; /* Do nothing. */ | |
| #else | |
| show_registers(regs); | |
| #endif | |
| } | |
| /* This is normally the Oops function. */ | |
| void | |
| die_if_kernel(const char *str, struct pt_regs *regs, long err) | |
| { | |
| if (user_mode(regs)) | |
| return; | |
| #ifdef CONFIG_ETRAX_WATCHDOG_NICE_DOGGY | |
| /* | |
| * This printout might take too long and could trigger | |
| * the watchdog normally. If NICE_DOGGY is set, simply | |
| * stop the watchdog during the printout. | |
| */ | |
| stop_watchdog(); | |
| #endif | |
| handle_BUG(regs); | |
| printk("%s: %04lx\n", str, err & 0xffff); | |
| show_registers(regs); | |
| oops_in_progress = 0; | |
| #ifdef CONFIG_ETRAX_WATCHDOG_NICE_DOGGY | |
| reset_watchdog(); | |
| #endif | |
| do_exit(SIGSEGV); | |
| } | |
| void __init | |
| trap_init(void) | |
| { | |
| /* Nothing needs to be done */ | |
| } |