| /* | 
 |  * Copyright 2013-2015 Emilio López | 
 |  * | 
 |  * Emilio López <emilio@elopez.com.ar> | 
 |  * | 
 |  * This program is free software; you can redistribute it and/or modify | 
 |  * it under the terms of the GNU General Public License as published by | 
 |  * the Free Software Foundation; either version 2 of the License, or | 
 |  * (at your option) any later version. | 
 |  * | 
 |  * This program is distributed in the hope that it will be useful, | 
 |  * but WITHOUT ANY WARRANTY; without even the implied warranty of | 
 |  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the | 
 |  * GNU General Public License for more details. | 
 |  */ | 
 |  | 
 | #include <linux/clk.h> | 
 | #include <linux/clk-provider.h> | 
 | #include <linux/of.h> | 
 | #include <linux/of_address.h> | 
 | #include <linux/reset-controller.h> | 
 | #include <linux/slab.h> | 
 | #include <linux/spinlock.h> | 
 |  | 
 |  | 
 | /** | 
 |  * sunxi_usb_reset... - reset bits in usb clk registers handling | 
 |  */ | 
 |  | 
 | struct usb_reset_data { | 
 | 	void __iomem			*reg; | 
 | 	spinlock_t			*lock; | 
 | 	struct clk			*clk; | 
 | 	struct reset_controller_dev	rcdev; | 
 | }; | 
 |  | 
 | static int sunxi_usb_reset_assert(struct reset_controller_dev *rcdev, | 
 | 			      unsigned long id) | 
 | { | 
 | 	struct usb_reset_data *data = container_of(rcdev, | 
 | 						   struct usb_reset_data, | 
 | 						   rcdev); | 
 | 	unsigned long flags; | 
 | 	u32 reg; | 
 |  | 
 | 	clk_prepare_enable(data->clk); | 
 | 	spin_lock_irqsave(data->lock, flags); | 
 |  | 
 | 	reg = readl(data->reg); | 
 | 	writel(reg & ~BIT(id), data->reg); | 
 |  | 
 | 	spin_unlock_irqrestore(data->lock, flags); | 
 | 	clk_disable_unprepare(data->clk); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int sunxi_usb_reset_deassert(struct reset_controller_dev *rcdev, | 
 | 				unsigned long id) | 
 | { | 
 | 	struct usb_reset_data *data = container_of(rcdev, | 
 | 						     struct usb_reset_data, | 
 | 						     rcdev); | 
 | 	unsigned long flags; | 
 | 	u32 reg; | 
 |  | 
 | 	clk_prepare_enable(data->clk); | 
 | 	spin_lock_irqsave(data->lock, flags); | 
 |  | 
 | 	reg = readl(data->reg); | 
 | 	writel(reg | BIT(id), data->reg); | 
 |  | 
 | 	spin_unlock_irqrestore(data->lock, flags); | 
 | 	clk_disable_unprepare(data->clk); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static struct reset_control_ops sunxi_usb_reset_ops = { | 
 | 	.assert		= sunxi_usb_reset_assert, | 
 | 	.deassert	= sunxi_usb_reset_deassert, | 
 | }; | 
 |  | 
 | /** | 
 |  * sunxi_usb_clk_setup() - Setup function for usb gate clocks | 
 |  */ | 
 |  | 
 | #define SUNXI_USB_MAX_SIZE 32 | 
 |  | 
 | struct usb_clk_data { | 
 | 	u32 clk_mask; | 
 | 	u32 reset_mask; | 
 | 	bool reset_needs_clk; | 
 | }; | 
 |  | 
 | static void __init sunxi_usb_clk_setup(struct device_node *node, | 
 | 				       const struct usb_clk_data *data, | 
 | 				       spinlock_t *lock) | 
 | { | 
 | 	struct clk_onecell_data *clk_data; | 
 | 	struct usb_reset_data *reset_data; | 
 | 	const char *clk_parent; | 
 | 	const char *clk_name; | 
 | 	void __iomem *reg; | 
 | 	int qty; | 
 | 	int i = 0; | 
 | 	int j = 0; | 
 |  | 
 | 	reg = of_io_request_and_map(node, 0, of_node_full_name(node)); | 
 | 	if (IS_ERR(reg)) | 
 | 		return; | 
 |  | 
 | 	clk_parent = of_clk_get_parent_name(node, 0); | 
 | 	if (!clk_parent) | 
 | 		return; | 
 |  | 
 | 	/* Worst-case size approximation and memory allocation */ | 
 | 	qty = find_last_bit((unsigned long *)&data->clk_mask, | 
 | 			    SUNXI_USB_MAX_SIZE); | 
 |  | 
 | 	clk_data = kmalloc(sizeof(struct clk_onecell_data), GFP_KERNEL); | 
 | 	if (!clk_data) | 
 | 		return; | 
 |  | 
 | 	clk_data->clks = kzalloc((qty+1) * sizeof(struct clk *), GFP_KERNEL); | 
 | 	if (!clk_data->clks) { | 
 | 		kfree(clk_data); | 
 | 		return; | 
 | 	} | 
 |  | 
 | 	for_each_set_bit(i, (unsigned long *)&data->clk_mask, | 
 | 			 SUNXI_USB_MAX_SIZE) { | 
 | 		of_property_read_string_index(node, "clock-output-names", | 
 | 					      j, &clk_name); | 
 | 		clk_data->clks[i] = clk_register_gate(NULL, clk_name, | 
 | 						      clk_parent, 0, | 
 | 						      reg, i, 0, lock); | 
 | 		WARN_ON(IS_ERR(clk_data->clks[i])); | 
 |  | 
 | 		j++; | 
 | 	} | 
 |  | 
 | 	/* Adjust to the real max */ | 
 | 	clk_data->clk_num = i; | 
 |  | 
 | 	of_clk_add_provider(node, of_clk_src_onecell_get, clk_data); | 
 |  | 
 | 	/* Register a reset controller for usb with reset bits */ | 
 | 	if (data->reset_mask == 0) | 
 | 		return; | 
 |  | 
 | 	reset_data = kzalloc(sizeof(*reset_data), GFP_KERNEL); | 
 | 	if (!reset_data) | 
 | 		return; | 
 |  | 
 | 	if (data->reset_needs_clk) { | 
 | 		reset_data->clk = of_clk_get(node, 0); | 
 | 		if (IS_ERR(reset_data->clk)) { | 
 | 			pr_err("Could not get clock for reset controls\n"); | 
 | 			kfree(reset_data); | 
 | 			return; | 
 | 		} | 
 | 	} | 
 |  | 
 | 	reset_data->reg = reg; | 
 | 	reset_data->lock = lock; | 
 | 	reset_data->rcdev.nr_resets = __fls(data->reset_mask) + 1; | 
 | 	reset_data->rcdev.ops = &sunxi_usb_reset_ops; | 
 | 	reset_data->rcdev.of_node = node; | 
 | 	reset_controller_register(&reset_data->rcdev); | 
 | } | 
 |  | 
 | static const struct usb_clk_data sun4i_a10_usb_clk_data __initconst = { | 
 | 	.clk_mask = BIT(8) | BIT(7) | BIT(6), | 
 | 	.reset_mask = BIT(2) | BIT(1) | BIT(0), | 
 | }; | 
 |  | 
 | static DEFINE_SPINLOCK(sun4i_a10_usb_lock); | 
 |  | 
 | static void __init sun4i_a10_usb_setup(struct device_node *node) | 
 | { | 
 | 	sunxi_usb_clk_setup(node, &sun4i_a10_usb_clk_data, &sun4i_a10_usb_lock); | 
 | } | 
 | CLK_OF_DECLARE(sun4i_a10_usb, "allwinner,sun4i-a10-usb-clk", sun4i_a10_usb_setup); | 
 |  | 
 | static const struct usb_clk_data sun5i_a13_usb_clk_data __initconst = { | 
 | 	.clk_mask = BIT(8) | BIT(6), | 
 | 	.reset_mask = BIT(1) | BIT(0), | 
 | }; | 
 |  | 
 | static void __init sun5i_a13_usb_setup(struct device_node *node) | 
 | { | 
 | 	sunxi_usb_clk_setup(node, &sun5i_a13_usb_clk_data, &sun4i_a10_usb_lock); | 
 | } | 
 | CLK_OF_DECLARE(sun5i_a13_usb, "allwinner,sun5i-a13-usb-clk", sun5i_a13_usb_setup); | 
 |  | 
 | static const struct usb_clk_data sun6i_a31_usb_clk_data __initconst = { | 
 | 	.clk_mask = BIT(18) | BIT(17) | BIT(16) | BIT(10) | BIT(9) | BIT(8), | 
 | 	.reset_mask = BIT(2) | BIT(1) | BIT(0), | 
 | }; | 
 |  | 
 | static void __init sun6i_a31_usb_setup(struct device_node *node) | 
 | { | 
 | 	sunxi_usb_clk_setup(node, &sun6i_a31_usb_clk_data, &sun4i_a10_usb_lock); | 
 | } | 
 | CLK_OF_DECLARE(sun6i_a31_usb, "allwinner,sun6i-a31-usb-clk", sun6i_a31_usb_setup); | 
 |  | 
 | static const struct usb_clk_data sun8i_a23_usb_clk_data __initconst = { | 
 | 	.clk_mask = BIT(16) | BIT(11) | BIT(10) | BIT(9) | BIT(8), | 
 | 	.reset_mask = BIT(2) | BIT(1) | BIT(0), | 
 | }; | 
 |  | 
 | static void __init sun8i_a23_usb_setup(struct device_node *node) | 
 | { | 
 | 	sunxi_usb_clk_setup(node, &sun8i_a23_usb_clk_data, &sun4i_a10_usb_lock); | 
 | } | 
 | CLK_OF_DECLARE(sun8i_a23_usb, "allwinner,sun8i-a23-usb-clk", sun8i_a23_usb_setup); | 
 |  | 
 | static const struct usb_clk_data sun9i_a80_usb_mod_data __initconst = { | 
 | 	.clk_mask = BIT(6) | BIT(5) | BIT(4) | BIT(3) | BIT(2) | BIT(1), | 
 | 	.reset_mask = BIT(19) | BIT(18) | BIT(17), | 
 | 	.reset_needs_clk = 1, | 
 | }; | 
 |  | 
 | static DEFINE_SPINLOCK(a80_usb_mod_lock); | 
 |  | 
 | static void __init sun9i_a80_usb_mod_setup(struct device_node *node) | 
 | { | 
 | 	sunxi_usb_clk_setup(node, &sun9i_a80_usb_mod_data, &a80_usb_mod_lock); | 
 | } | 
 | CLK_OF_DECLARE(sun9i_a80_usb_mod, "allwinner,sun9i-a80-usb-mod-clk", sun9i_a80_usb_mod_setup); | 
 |  | 
 | static const struct usb_clk_data sun9i_a80_usb_phy_data __initconst = { | 
 | 	.clk_mask = BIT(10) | BIT(5) | BIT(4) | BIT(3) | BIT(2) | BIT(1), | 
 | 	.reset_mask = BIT(21) | BIT(20) | BIT(19) | BIT(18) | BIT(17), | 
 | 	.reset_needs_clk = 1, | 
 | }; | 
 |  | 
 | static DEFINE_SPINLOCK(a80_usb_phy_lock); | 
 |  | 
 | static void __init sun9i_a80_usb_phy_setup(struct device_node *node) | 
 | { | 
 | 	sunxi_usb_clk_setup(node, &sun9i_a80_usb_phy_data, &a80_usb_phy_lock); | 
 | } | 
 | CLK_OF_DECLARE(sun9i_a80_usb_phy, "allwinner,sun9i-a80-usb-phy-clk", sun9i_a80_usb_phy_setup); |