| /* |
| * IBM TrackPoint PS/2 mouse driver |
| * |
| * Stephen Evanchik <evanchsa@gmail.com> |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License version 2 as published by |
| * the Free Software Foundation. |
| */ |
| |
| #ifndef _TRACKPOINT_H |
| #define _TRACKPOINT_H |
| |
| /* |
| * These constants are from the TrackPoint System |
| * Engineering documentation Version 4 from IBM Watson |
| * research: |
| * http://wwwcssrv.almaden.ibm.com/trackpoint/download.html |
| */ |
| |
| #define TP_COMMAND 0xE2 /* Commands start with this */ |
| |
| #define TP_READ_ID 0xE1 /* Sent for device identification */ |
| |
| /* |
| * Valid first byte responses to the "Read Secondary ID" (0xE1) command. |
| * 0x01 was the original IBM trackpoint, others implement very limited |
| * subset of trackpoint features. |
| */ |
| #define TP_VARIANT_IBM 0x01 |
| #define TP_VARIANT_ALPS 0x02 |
| #define TP_VARIANT_ELAN 0x03 |
| #define TP_VARIANT_NXP 0x04 |
| |
| /* |
| * Commands |
| */ |
| #define TP_RECALIB 0x51 /* Recalibrate */ |
| #define TP_POWER_DOWN 0x44 /* Can only be undone through HW reset */ |
| #define TP_EXT_DEV 0x21 /* Determines if external device is connected (RO) */ |
| #define TP_EXT_BTN 0x4B /* Read extended button status */ |
| #define TP_POR 0x7F /* Execute Power on Reset */ |
| #define TP_POR_RESULTS 0x25 /* Read Power on Self test results */ |
| #define TP_DISABLE_EXT 0x40 /* Disable external pointing device */ |
| #define TP_ENABLE_EXT 0x41 /* Enable external pointing device */ |
| |
| /* |
| * Mode manipulation |
| */ |
| #define TP_SET_SOFT_TRANS 0x4E /* Set mode */ |
| #define TP_CANCEL_SOFT_TRANS 0xB9 /* Cancel mode */ |
| #define TP_SET_HARD_TRANS 0x45 /* Mode can only be set */ |
| |
| |
| /* |
| * Register oriented commands/properties |
| */ |
| #define TP_WRITE_MEM 0x81 |
| #define TP_READ_MEM 0x80 /* Not used in this implementation */ |
| |
| /* |
| * RAM Locations for properties |
| */ |
| #define TP_SENS 0x4A /* Sensitivity */ |
| #define TP_MB 0x4C /* Read Middle Button Status (RO) */ |
| #define TP_INERTIA 0x4D /* Negative Inertia */ |
| #define TP_SPEED 0x60 /* Speed of TP Cursor */ |
| #define TP_REACH 0x57 /* Backup for Z-axis press */ |
| #define TP_DRAGHYS 0x58 /* Drag Hysteresis */ |
| /* (how hard it is to drag */ |
| /* with Z-axis pressed) */ |
| |
| #define TP_MINDRAG 0x59 /* Minimum amount of force needed */ |
| /* to trigger dragging */ |
| |
| #define TP_THRESH 0x5C /* Minimum value for a Z-axis press */ |
| #define TP_UP_THRESH 0x5A /* Used to generate a 'click' on Z-axis */ |
| #define TP_Z_TIME 0x5E /* How sharp of a press */ |
| #define TP_JENKS_CURV 0x5D /* Minimum curvature for double click */ |
| #define TP_DRIFT_TIME 0x5F /* How long a 'hands off' condition */ |
| /* must last (x*107ms) for drift */ |
| /* correction to occur */ |
| |
| /* |
| * Toggling Flag bits |
| */ |
| #define TP_TOGGLE 0x47 /* Toggle command */ |
| |
| #define TP_TOGGLE_MB 0x23 /* Disable/Enable Middle Button */ |
| #define TP_MASK_MB 0x01 |
| #define TP_TOGGLE_EXT_DEV 0x23 /* Disable external device */ |
| #define TP_MASK_EXT_DEV 0x02 |
| #define TP_TOGGLE_DRIFT 0x23 /* Drift Correction */ |
| #define TP_MASK_DRIFT 0x80 |
| #define TP_TOGGLE_BURST 0x28 /* Burst Mode */ |
| #define TP_MASK_BURST 0x80 |
| #define TP_TOGGLE_PTSON 0x2C /* Press to Select */ |
| #define TP_MASK_PTSON 0x01 |
| #define TP_TOGGLE_HARD_TRANS 0x2C /* Alternate method to set Hard Transparency */ |
| #define TP_MASK_HARD_TRANS 0x80 |
| #define TP_TOGGLE_TWOHAND 0x2D /* Two handed */ |
| #define TP_MASK_TWOHAND 0x01 |
| #define TP_TOGGLE_STICKY_TWO 0x2D /* Sticky two handed */ |
| #define TP_MASK_STICKY_TWO 0x04 |
| #define TP_TOGGLE_SKIPBACK 0x2D /* Suppress movement after drag release */ |
| #define TP_MASK_SKIPBACK 0x08 |
| #define TP_TOGGLE_SOURCE_TAG 0x20 /* Bit 3 of the first packet will be set to |
| to the origin of the packet (external or TP) */ |
| #define TP_MASK_SOURCE_TAG 0x80 |
| #define TP_TOGGLE_EXT_TAG 0x22 /* Bit 3 of the first packet coming from the |
| external device will be forced to 1 */ |
| #define TP_MASK_EXT_TAG 0x04 |
| |
| |
| /* Power on Self Test Results */ |
| #define TP_POR_SUCCESS 0x3B |
| |
| /* |
| * Default power on values |
| */ |
| #define TP_DEF_SENS 0x80 |
| #define TP_DEF_INERTIA 0x06 |
| #define TP_DEF_SPEED 0x61 |
| #define TP_DEF_REACH 0x0A |
| |
| #define TP_DEF_DRAGHYS 0xFF |
| #define TP_DEF_MINDRAG 0x14 |
| |
| #define TP_DEF_THRESH 0x08 |
| #define TP_DEF_UP_THRESH 0xFF |
| #define TP_DEF_Z_TIME 0x26 |
| #define TP_DEF_JENKS_CURV 0x87 |
| #define TP_DEF_DRIFT_TIME 0x05 |
| |
| /* Toggles */ |
| #define TP_DEF_MB 0x00 |
| #define TP_DEF_PTSON 0x00 |
| #define TP_DEF_SKIPBACK 0x00 |
| #define TP_DEF_EXT_DEV 0x00 /* 0 means enabled */ |
| #define TP_DEF_TWOHAND 0x00 |
| #define TP_DEF_SOURCE_TAG 0x00 |
| |
| #define MAKE_PS2_CMD(params, results, cmd) ((params<<12) | (results<<8) | (cmd)) |
| |
| struct trackpoint_data { |
| u8 variant_id; |
| u8 firmware_id; |
| |
| u8 sensitivity, speed, inertia, reach; |
| u8 draghys, mindrag; |
| u8 thresh, upthresh; |
| u8 ztime, jenks; |
| u8 drift_time; |
| |
| /* toggles */ |
| bool press_to_select; |
| bool skipback; |
| bool ext_dev; |
| }; |
| |
| #ifdef CONFIG_MOUSE_PS2_TRACKPOINT |
| int trackpoint_detect(struct psmouse *psmouse, bool set_properties); |
| #else |
| inline int trackpoint_detect(struct psmouse *psmouse, bool set_properties) |
| { |
| return -ENOSYS; |
| } |
| #endif /* CONFIG_MOUSE_PS2_TRACKPOINT */ |
| |
| #endif /* _TRACKPOINT_H */ |