| #include <linux/delay.h> | |
| #include <linux/pci.h> | |
| #include <linux/module.h> | |
| #include <linux/sched.h> | |
| #include <linux/slab.h> | |
| #include <linux/ioport.h> | |
| #include <linux/wait.h> | |
| #include "pci.h" | |
| /* | |
| * This interrupt-safe spinlock protects all accesses to PCI | |
| * configuration space. | |
| */ | |
| DEFINE_RAW_SPINLOCK(pci_lock); | |
| /* | |
| * Wrappers for all PCI configuration access functions. They just check | |
| * alignment, do locking and call the low-level functions pointed to | |
| * by pci_dev->ops. | |
| */ | |
| #define PCI_byte_BAD 0 | |
| #define PCI_word_BAD (pos & 1) | |
| #define PCI_dword_BAD (pos & 3) | |
| #define PCI_OP_READ(size,type,len) \ | |
| int pci_bus_read_config_##size \ | |
| (struct pci_bus *bus, unsigned int devfn, int pos, type *value) \ | |
| { \ | |
| int res; \ | |
| unsigned long flags; \ | |
| u32 data = 0; \ | |
| if (PCI_##size##_BAD) return PCIBIOS_BAD_REGISTER_NUMBER; \ | |
| raw_spin_lock_irqsave(&pci_lock, flags); \ | |
| res = bus->ops->read(bus, devfn, pos, len, &data); \ | |
| *value = (type)data; \ | |
| raw_spin_unlock_irqrestore(&pci_lock, flags); \ | |
| return res; \ | |
| } | |
| #define PCI_OP_WRITE(size,type,len) \ | |
| int pci_bus_write_config_##size \ | |
| (struct pci_bus *bus, unsigned int devfn, int pos, type value) \ | |
| { \ | |
| int res; \ | |
| unsigned long flags; \ | |
| if (PCI_##size##_BAD) return PCIBIOS_BAD_REGISTER_NUMBER; \ | |
| raw_spin_lock_irqsave(&pci_lock, flags); \ | |
| res = bus->ops->write(bus, devfn, pos, len, value); \ | |
| raw_spin_unlock_irqrestore(&pci_lock, flags); \ | |
| return res; \ | |
| } | |
| PCI_OP_READ(byte, u8, 1) | |
| PCI_OP_READ(word, u16, 2) | |
| PCI_OP_READ(dword, u32, 4) | |
| PCI_OP_WRITE(byte, u8, 1) | |
| PCI_OP_WRITE(word, u16, 2) | |
| PCI_OP_WRITE(dword, u32, 4) | |
| EXPORT_SYMBOL(pci_bus_read_config_byte); | |
| EXPORT_SYMBOL(pci_bus_read_config_word); | |
| EXPORT_SYMBOL(pci_bus_read_config_dword); | |
| EXPORT_SYMBOL(pci_bus_write_config_byte); | |
| EXPORT_SYMBOL(pci_bus_write_config_word); | |
| EXPORT_SYMBOL(pci_bus_write_config_dword); | |
| int pci_generic_config_read(struct pci_bus *bus, unsigned int devfn, | |
| int where, int size, u32 *val) | |
| { | |
| void __iomem *addr; | |
| addr = bus->ops->map_bus(bus, devfn, where); | |
| if (!addr) { | |
| *val = ~0; | |
| return PCIBIOS_DEVICE_NOT_FOUND; | |
| } | |
| if (size == 1) | |
| *val = readb(addr); | |
| else if (size == 2) | |
| *val = readw(addr); | |
| else | |
| *val = readl(addr); | |
| return PCIBIOS_SUCCESSFUL; | |
| } | |
| EXPORT_SYMBOL_GPL(pci_generic_config_read); | |
| int pci_generic_config_write(struct pci_bus *bus, unsigned int devfn, | |
| int where, int size, u32 val) | |
| { | |
| void __iomem *addr; | |
| addr = bus->ops->map_bus(bus, devfn, where); | |
| if (!addr) | |
| return PCIBIOS_DEVICE_NOT_FOUND; | |
| if (size == 1) | |
| writeb(val, addr); | |
| else if (size == 2) | |
| writew(val, addr); | |
| else | |
| writel(val, addr); | |
| return PCIBIOS_SUCCESSFUL; | |
| } | |
| EXPORT_SYMBOL_GPL(pci_generic_config_write); | |
| int pci_generic_config_read32(struct pci_bus *bus, unsigned int devfn, | |
| int where, int size, u32 *val) | |
| { | |
| void __iomem *addr; | |
| addr = bus->ops->map_bus(bus, devfn, where & ~0x3); | |
| if (!addr) { | |
| *val = ~0; | |
| return PCIBIOS_DEVICE_NOT_FOUND; | |
| } | |
| *val = readl(addr); | |
| if (size <= 2) | |
| *val = (*val >> (8 * (where & 3))) & ((1 << (size * 8)) - 1); | |
| return PCIBIOS_SUCCESSFUL; | |
| } | |
| EXPORT_SYMBOL_GPL(pci_generic_config_read32); | |
| int pci_generic_config_write32(struct pci_bus *bus, unsigned int devfn, | |
| int where, int size, u32 val) | |
| { | |
| void __iomem *addr; | |
| u32 mask, tmp; | |
| addr = bus->ops->map_bus(bus, devfn, where & ~0x3); | |
| if (!addr) | |
| return PCIBIOS_DEVICE_NOT_FOUND; | |
| if (size == 4) { | |
| writel(val, addr); | |
| return PCIBIOS_SUCCESSFUL; | |
| } else { | |
| mask = ~(((1 << (size * 8)) - 1) << ((where & 0x3) * 8)); | |
| } | |
| tmp = readl(addr) & mask; | |
| tmp |= val << ((where & 0x3) * 8); | |
| writel(tmp, addr); | |
| return PCIBIOS_SUCCESSFUL; | |
| } | |
| EXPORT_SYMBOL_GPL(pci_generic_config_write32); | |
| /** | |
| * pci_bus_set_ops - Set raw operations of pci bus | |
| * @bus: pci bus struct | |
| * @ops: new raw operations | |
| * | |
| * Return previous raw operations | |
| */ | |
| struct pci_ops *pci_bus_set_ops(struct pci_bus *bus, struct pci_ops *ops) | |
| { | |
| struct pci_ops *old_ops; | |
| unsigned long flags; | |
| raw_spin_lock_irqsave(&pci_lock, flags); | |
| old_ops = bus->ops; | |
| bus->ops = ops; | |
| raw_spin_unlock_irqrestore(&pci_lock, flags); | |
| return old_ops; | |
| } | |
| EXPORT_SYMBOL(pci_bus_set_ops); | |
| /** | |
| * pci_read_vpd - Read one entry from Vital Product Data | |
| * @dev: pci device struct | |
| * @pos: offset in vpd space | |
| * @count: number of bytes to read | |
| * @buf: pointer to where to store result | |
| * | |
| */ | |
| ssize_t pci_read_vpd(struct pci_dev *dev, loff_t pos, size_t count, void *buf) | |
| { | |
| if (!dev->vpd || !dev->vpd->ops) | |
| return -ENODEV; | |
| return dev->vpd->ops->read(dev, pos, count, buf); | |
| } | |
| EXPORT_SYMBOL(pci_read_vpd); | |
| /** | |
| * pci_write_vpd - Write entry to Vital Product Data | |
| * @dev: pci device struct | |
| * @pos: offset in vpd space | |
| * @count: number of bytes to write | |
| * @buf: buffer containing write data | |
| * | |
| */ | |
| ssize_t pci_write_vpd(struct pci_dev *dev, loff_t pos, size_t count, const void *buf) | |
| { | |
| if (!dev->vpd || !dev->vpd->ops) | |
| return -ENODEV; | |
| return dev->vpd->ops->write(dev, pos, count, buf); | |
| } | |
| EXPORT_SYMBOL(pci_write_vpd); | |
| /* | |
| * The following routines are to prevent the user from accessing PCI config | |
| * space when it's unsafe to do so. Some devices require this during BIST and | |
| * we're required to prevent it during D-state transitions. | |
| * | |
| * We have a bit per device to indicate it's blocked and a global wait queue | |
| * for callers to sleep on until devices are unblocked. | |
| */ | |
| static DECLARE_WAIT_QUEUE_HEAD(pci_cfg_wait); | |
| static noinline void pci_wait_cfg(struct pci_dev *dev) | |
| { | |
| DECLARE_WAITQUEUE(wait, current); | |
| __add_wait_queue(&pci_cfg_wait, &wait); | |
| do { | |
| set_current_state(TASK_UNINTERRUPTIBLE); | |
| raw_spin_unlock_irq(&pci_lock); | |
| schedule(); | |
| raw_spin_lock_irq(&pci_lock); | |
| } while (dev->block_cfg_access); | |
| __remove_wait_queue(&pci_cfg_wait, &wait); | |
| } | |
| /* Returns 0 on success, negative values indicate error. */ | |
| #define PCI_USER_READ_CONFIG(size,type) \ | |
| int pci_user_read_config_##size \ | |
| (struct pci_dev *dev, int pos, type *val) \ | |
| { \ | |
| int ret = PCIBIOS_SUCCESSFUL; \ | |
| u32 data = -1; \ | |
| if (PCI_##size##_BAD) \ | |
| return -EINVAL; \ | |
| raw_spin_lock_irq(&pci_lock); \ | |
| if (unlikely(dev->block_cfg_access)) \ | |
| pci_wait_cfg(dev); \ | |
| ret = dev->bus->ops->read(dev->bus, dev->devfn, \ | |
| pos, sizeof(type), &data); \ | |
| raw_spin_unlock_irq(&pci_lock); \ | |
| *val = (type)data; \ | |
| return pcibios_err_to_errno(ret); \ | |
| } \ | |
| EXPORT_SYMBOL_GPL(pci_user_read_config_##size); | |
| /* Returns 0 on success, negative values indicate error. */ | |
| #define PCI_USER_WRITE_CONFIG(size,type) \ | |
| int pci_user_write_config_##size \ | |
| (struct pci_dev *dev, int pos, type val) \ | |
| { \ | |
| int ret = PCIBIOS_SUCCESSFUL; \ | |
| if (PCI_##size##_BAD) \ | |
| return -EINVAL; \ | |
| raw_spin_lock_irq(&pci_lock); \ | |
| if (unlikely(dev->block_cfg_access)) \ | |
| pci_wait_cfg(dev); \ | |
| ret = dev->bus->ops->write(dev->bus, dev->devfn, \ | |
| pos, sizeof(type), val); \ | |
| raw_spin_unlock_irq(&pci_lock); \ | |
| return pcibios_err_to_errno(ret); \ | |
| } \ | |
| EXPORT_SYMBOL_GPL(pci_user_write_config_##size); | |
| PCI_USER_READ_CONFIG(byte, u8) | |
| PCI_USER_READ_CONFIG(word, u16) | |
| PCI_USER_READ_CONFIG(dword, u32) | |
| PCI_USER_WRITE_CONFIG(byte, u8) | |
| PCI_USER_WRITE_CONFIG(word, u16) | |
| PCI_USER_WRITE_CONFIG(dword, u32) | |
| /* VPD access through PCI 2.2+ VPD capability */ | |
| #define PCI_VPD_PCI22_SIZE (PCI_VPD_ADDR_MASK + 1) | |
| struct pci_vpd_pci22 { | |
| struct pci_vpd base; | |
| struct mutex lock; | |
| u16 flag; | |
| bool busy; | |
| u8 cap; | |
| }; | |
| /* | |
| * Wait for last operation to complete. | |
| * This code has to spin since there is no other notification from the PCI | |
| * hardware. Since the VPD is often implemented by serial attachment to an | |
| * EEPROM, it may take many milliseconds to complete. | |
| * | |
| * Returns 0 on success, negative values indicate error. | |
| */ | |
| static int pci_vpd_pci22_wait(struct pci_dev *dev) | |
| { | |
| struct pci_vpd_pci22 *vpd = | |
| container_of(dev->vpd, struct pci_vpd_pci22, base); | |
| unsigned long timeout = jiffies + HZ/20 + 2; | |
| u16 status; | |
| int ret; | |
| if (!vpd->busy) | |
| return 0; | |
| for (;;) { | |
| ret = pci_user_read_config_word(dev, vpd->cap + PCI_VPD_ADDR, | |
| &status); | |
| if (ret < 0) | |
| return ret; | |
| if ((status & PCI_VPD_ADDR_F) == vpd->flag) { | |
| vpd->busy = false; | |
| return 0; | |
| } | |
| if (time_after(jiffies, timeout)) { | |
| dev_printk(KERN_DEBUG, &dev->dev, "vpd r/w failed. This is likely a firmware bug on this device. Contact the card vendor for a firmware update\n"); | |
| return -ETIMEDOUT; | |
| } | |
| if (fatal_signal_pending(current)) | |
| return -EINTR; | |
| if (!cond_resched()) | |
| udelay(10); | |
| } | |
| } | |
| static ssize_t pci_vpd_pci22_read(struct pci_dev *dev, loff_t pos, size_t count, | |
| void *arg) | |
| { | |
| struct pci_vpd_pci22 *vpd = | |
| container_of(dev->vpd, struct pci_vpd_pci22, base); | |
| int ret; | |
| loff_t end = pos + count; | |
| u8 *buf = arg; | |
| if (pos < 0 || pos > vpd->base.len || end > vpd->base.len) | |
| return -EINVAL; | |
| if (mutex_lock_killable(&vpd->lock)) | |
| return -EINTR; | |
| ret = pci_vpd_pci22_wait(dev); | |
| if (ret < 0) | |
| goto out; | |
| while (pos < end) { | |
| u32 val; | |
| unsigned int i, skip; | |
| ret = pci_user_write_config_word(dev, vpd->cap + PCI_VPD_ADDR, | |
| pos & ~3); | |
| if (ret < 0) | |
| break; | |
| vpd->busy = true; | |
| vpd->flag = PCI_VPD_ADDR_F; | |
| ret = pci_vpd_pci22_wait(dev); | |
| if (ret < 0) | |
| break; | |
| ret = pci_user_read_config_dword(dev, vpd->cap + PCI_VPD_DATA, &val); | |
| if (ret < 0) | |
| break; | |
| skip = pos & 3; | |
| for (i = 0; i < sizeof(u32); i++) { | |
| if (i >= skip) { | |
| *buf++ = val; | |
| if (++pos == end) | |
| break; | |
| } | |
| val >>= 8; | |
| } | |
| } | |
| out: | |
| mutex_unlock(&vpd->lock); | |
| return ret ? ret : count; | |
| } | |
| static ssize_t pci_vpd_pci22_write(struct pci_dev *dev, loff_t pos, size_t count, | |
| const void *arg) | |
| { | |
| struct pci_vpd_pci22 *vpd = | |
| container_of(dev->vpd, struct pci_vpd_pci22, base); | |
| const u8 *buf = arg; | |
| loff_t end = pos + count; | |
| int ret = 0; | |
| if (pos < 0 || (pos & 3) || (count & 3) || end > vpd->base.len) | |
| return -EINVAL; | |
| if (mutex_lock_killable(&vpd->lock)) | |
| return -EINTR; | |
| ret = pci_vpd_pci22_wait(dev); | |
| if (ret < 0) | |
| goto out; | |
| while (pos < end) { | |
| u32 val; | |
| val = *buf++; | |
| val |= *buf++ << 8; | |
| val |= *buf++ << 16; | |
| val |= *buf++ << 24; | |
| ret = pci_user_write_config_dword(dev, vpd->cap + PCI_VPD_DATA, val); | |
| if (ret < 0) | |
| break; | |
| ret = pci_user_write_config_word(dev, vpd->cap + PCI_VPD_ADDR, | |
| pos | PCI_VPD_ADDR_F); | |
| if (ret < 0) | |
| break; | |
| vpd->busy = true; | |
| vpd->flag = 0; | |
| ret = pci_vpd_pci22_wait(dev); | |
| if (ret < 0) | |
| break; | |
| pos += sizeof(u32); | |
| } | |
| out: | |
| mutex_unlock(&vpd->lock); | |
| return ret ? ret : count; | |
| } | |
| static void pci_vpd_pci22_release(struct pci_dev *dev) | |
| { | |
| kfree(container_of(dev->vpd, struct pci_vpd_pci22, base)); | |
| } | |
| static const struct pci_vpd_ops pci_vpd_pci22_ops = { | |
| .read = pci_vpd_pci22_read, | |
| .write = pci_vpd_pci22_write, | |
| .release = pci_vpd_pci22_release, | |
| }; | |
| int pci_vpd_pci22_init(struct pci_dev *dev) | |
| { | |
| struct pci_vpd_pci22 *vpd; | |
| u8 cap; | |
| cap = pci_find_capability(dev, PCI_CAP_ID_VPD); | |
| if (!cap) | |
| return -ENODEV; | |
| vpd = kzalloc(sizeof(*vpd), GFP_ATOMIC); | |
| if (!vpd) | |
| return -ENOMEM; | |
| vpd->base.len = PCI_VPD_PCI22_SIZE; | |
| vpd->base.ops = &pci_vpd_pci22_ops; | |
| mutex_init(&vpd->lock); | |
| vpd->cap = cap; | |
| vpd->busy = false; | |
| dev->vpd = &vpd->base; | |
| return 0; | |
| } | |
| /** | |
| * pci_cfg_access_lock - Lock PCI config reads/writes | |
| * @dev: pci device struct | |
| * | |
| * When access is locked, any userspace reads or writes to config | |
| * space and concurrent lock requests will sleep until access is | |
| * allowed via pci_cfg_access_unlocked again. | |
| */ | |
| void pci_cfg_access_lock(struct pci_dev *dev) | |
| { | |
| might_sleep(); | |
| raw_spin_lock_irq(&pci_lock); | |
| if (dev->block_cfg_access) | |
| pci_wait_cfg(dev); | |
| dev->block_cfg_access = 1; | |
| raw_spin_unlock_irq(&pci_lock); | |
| } | |
| EXPORT_SYMBOL_GPL(pci_cfg_access_lock); | |
| /** | |
| * pci_cfg_access_trylock - try to lock PCI config reads/writes | |
| * @dev: pci device struct | |
| * | |
| * Same as pci_cfg_access_lock, but will return 0 if access is | |
| * already locked, 1 otherwise. This function can be used from | |
| * atomic contexts. | |
| */ | |
| bool pci_cfg_access_trylock(struct pci_dev *dev) | |
| { | |
| unsigned long flags; | |
| bool locked = true; | |
| raw_spin_lock_irqsave(&pci_lock, flags); | |
| if (dev->block_cfg_access) | |
| locked = false; | |
| else | |
| dev->block_cfg_access = 1; | |
| raw_spin_unlock_irqrestore(&pci_lock, flags); | |
| return locked; | |
| } | |
| EXPORT_SYMBOL_GPL(pci_cfg_access_trylock); | |
| /** | |
| * pci_cfg_access_unlock - Unlock PCI config reads/writes | |
| * @dev: pci device struct | |
| * | |
| * This function allows PCI config accesses to resume. | |
| */ | |
| void pci_cfg_access_unlock(struct pci_dev *dev) | |
| { | |
| unsigned long flags; | |
| raw_spin_lock_irqsave(&pci_lock, flags); | |
| /* This indicates a problem in the caller, but we don't need | |
| * to kill them, unlike a double-block above. */ | |
| WARN_ON(!dev->block_cfg_access); | |
| dev->block_cfg_access = 0; | |
| wake_up_all(&pci_cfg_wait); | |
| raw_spin_unlock_irqrestore(&pci_lock, flags); | |
| } | |
| EXPORT_SYMBOL_GPL(pci_cfg_access_unlock); | |
| static inline int pcie_cap_version(const struct pci_dev *dev) | |
| { | |
| return pcie_caps_reg(dev) & PCI_EXP_FLAGS_VERS; | |
| } | |
| bool pcie_cap_has_lnkctl(const struct pci_dev *dev) | |
| { | |
| int type = pci_pcie_type(dev); | |
| return type == PCI_EXP_TYPE_ENDPOINT || | |
| type == PCI_EXP_TYPE_LEG_END || | |
| type == PCI_EXP_TYPE_ROOT_PORT || | |
| type == PCI_EXP_TYPE_UPSTREAM || | |
| type == PCI_EXP_TYPE_DOWNSTREAM || | |
| type == PCI_EXP_TYPE_PCI_BRIDGE || | |
| type == PCI_EXP_TYPE_PCIE_BRIDGE; | |
| } | |
| static inline bool pcie_cap_has_sltctl(const struct pci_dev *dev) | |
| { | |
| int type = pci_pcie_type(dev); | |
| return (type == PCI_EXP_TYPE_ROOT_PORT || | |
| type == PCI_EXP_TYPE_DOWNSTREAM) && | |
| pcie_caps_reg(dev) & PCI_EXP_FLAGS_SLOT; | |
| } | |
| static inline bool pcie_cap_has_rtctl(const struct pci_dev *dev) | |
| { | |
| int type = pci_pcie_type(dev); | |
| return type == PCI_EXP_TYPE_ROOT_PORT || | |
| type == PCI_EXP_TYPE_RC_EC; | |
| } | |
| static bool pcie_capability_reg_implemented(struct pci_dev *dev, int pos) | |
| { | |
| if (!pci_is_pcie(dev)) | |
| return false; | |
| switch (pos) { | |
| case PCI_EXP_FLAGS: | |
| return true; | |
| case PCI_EXP_DEVCAP: | |
| case PCI_EXP_DEVCTL: | |
| case PCI_EXP_DEVSTA: | |
| return true; | |
| case PCI_EXP_LNKCAP: | |
| case PCI_EXP_LNKCTL: | |
| case PCI_EXP_LNKSTA: | |
| return pcie_cap_has_lnkctl(dev); | |
| case PCI_EXP_SLTCAP: | |
| case PCI_EXP_SLTCTL: | |
| case PCI_EXP_SLTSTA: | |
| return pcie_cap_has_sltctl(dev); | |
| case PCI_EXP_RTCTL: | |
| case PCI_EXP_RTCAP: | |
| case PCI_EXP_RTSTA: | |
| return pcie_cap_has_rtctl(dev); | |
| case PCI_EXP_DEVCAP2: | |
| case PCI_EXP_DEVCTL2: | |
| case PCI_EXP_LNKCAP2: | |
| case PCI_EXP_LNKCTL2: | |
| case PCI_EXP_LNKSTA2: | |
| return pcie_cap_version(dev) > 1; | |
| default: | |
| return false; | |
| } | |
| } | |
| /* | |
| * Note that these accessor functions are only for the "PCI Express | |
| * Capability" (see PCIe spec r3.0, sec 7.8). They do not apply to the | |
| * other "PCI Express Extended Capabilities" (AER, VC, ACS, MFVC, etc.) | |
| */ | |
| int pcie_capability_read_word(struct pci_dev *dev, int pos, u16 *val) | |
| { | |
| int ret; | |
| *val = 0; | |
| if (pos & 1) | |
| return -EINVAL; | |
| if (pcie_capability_reg_implemented(dev, pos)) { | |
| ret = pci_read_config_word(dev, pci_pcie_cap(dev) + pos, val); | |
| /* | |
| * Reset *val to 0 if pci_read_config_word() fails, it may | |
| * have been written as 0xFFFF if hardware error happens | |
| * during pci_read_config_word(). | |
| */ | |
| if (ret) | |
| *val = 0; | |
| return ret; | |
| } | |
| /* | |
| * For Functions that do not implement the Slot Capabilities, | |
| * Slot Status, and Slot Control registers, these spaces must | |
| * be hardwired to 0b, with the exception of the Presence Detect | |
| * State bit in the Slot Status register of Downstream Ports, | |
| * which must be hardwired to 1b. (PCIe Base Spec 3.0, sec 7.8) | |
| */ | |
| if (pci_is_pcie(dev) && pos == PCI_EXP_SLTSTA && | |
| pci_pcie_type(dev) == PCI_EXP_TYPE_DOWNSTREAM) { | |
| *val = PCI_EXP_SLTSTA_PDS; | |
| } | |
| return 0; | |
| } | |
| EXPORT_SYMBOL(pcie_capability_read_word); | |
| int pcie_capability_read_dword(struct pci_dev *dev, int pos, u32 *val) | |
| { | |
| int ret; | |
| *val = 0; | |
| if (pos & 3) | |
| return -EINVAL; | |
| if (pcie_capability_reg_implemented(dev, pos)) { | |
| ret = pci_read_config_dword(dev, pci_pcie_cap(dev) + pos, val); | |
| /* | |
| * Reset *val to 0 if pci_read_config_dword() fails, it may | |
| * have been written as 0xFFFFFFFF if hardware error happens | |
| * during pci_read_config_dword(). | |
| */ | |
| if (ret) | |
| *val = 0; | |
| return ret; | |
| } | |
| if (pci_is_pcie(dev) && pos == PCI_EXP_SLTCTL && | |
| pci_pcie_type(dev) == PCI_EXP_TYPE_DOWNSTREAM) { | |
| *val = PCI_EXP_SLTSTA_PDS; | |
| } | |
| return 0; | |
| } | |
| EXPORT_SYMBOL(pcie_capability_read_dword); | |
| int pcie_capability_write_word(struct pci_dev *dev, int pos, u16 val) | |
| { | |
| if (pos & 1) | |
| return -EINVAL; | |
| if (!pcie_capability_reg_implemented(dev, pos)) | |
| return 0; | |
| return pci_write_config_word(dev, pci_pcie_cap(dev) + pos, val); | |
| } | |
| EXPORT_SYMBOL(pcie_capability_write_word); | |
| int pcie_capability_write_dword(struct pci_dev *dev, int pos, u32 val) | |
| { | |
| if (pos & 3) | |
| return -EINVAL; | |
| if (!pcie_capability_reg_implemented(dev, pos)) | |
| return 0; | |
| return pci_write_config_dword(dev, pci_pcie_cap(dev) + pos, val); | |
| } | |
| EXPORT_SYMBOL(pcie_capability_write_dword); | |
| int pcie_capability_clear_and_set_word(struct pci_dev *dev, int pos, | |
| u16 clear, u16 set) | |
| { | |
| int ret; | |
| u16 val; | |
| ret = pcie_capability_read_word(dev, pos, &val); | |
| if (!ret) { | |
| val &= ~clear; | |
| val |= set; | |
| ret = pcie_capability_write_word(dev, pos, val); | |
| } | |
| return ret; | |
| } | |
| EXPORT_SYMBOL(pcie_capability_clear_and_set_word); | |
| int pcie_capability_clear_and_set_dword(struct pci_dev *dev, int pos, | |
| u32 clear, u32 set) | |
| { | |
| int ret; | |
| u32 val; | |
| ret = pcie_capability_read_dword(dev, pos, &val); | |
| if (!ret) { | |
| val &= ~clear; | |
| val |= set; | |
| ret = pcie_capability_write_dword(dev, pos, val); | |
| } | |
| return ret; | |
| } | |
| EXPORT_SYMBOL(pcie_capability_clear_and_set_dword); |