| /* | |
| * Copyright © 2011 Intel Corporation | |
| * | |
| * Permission is hereby granted, free of charge, to any person obtaining a | |
| * copy of this software and associated documentation files (the "Software"), | |
| * to deal in the Software without restriction, including without limitation | |
| * the rights to use, copy, modify, merge, publish, distribute, sublicense, | |
| * and/or sell copies of the Software, and to permit persons to whom the | |
| * Software is furnished to do so, subject to the following conditions: | |
| * | |
| * The above copyright notice and this permission notice (including the next | |
| * paragraph) shall be included in all copies or substantial portions of the | |
| * Software. | |
| * | |
| * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR | |
| * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, | |
| * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL | |
| * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER | |
| * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, | |
| * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE | |
| * SOFTWARE. | |
| * | |
| * Authors: | |
| * Jesse Barnes <jbarnes@virtuousgeek.org> | |
| * | |
| * New plane/sprite handling. | |
| * | |
| * The older chips had a separate interface for programming plane related | |
| * registers; newer ones are much simpler and we can use the new DRM plane | |
| * support. | |
| */ | |
| #include <drm/drmP.h> | |
| #include <drm/drm_crtc.h> | |
| #include <drm/drm_fourcc.h> | |
| #include <drm/drm_rect.h> | |
| #include <drm/drm_plane_helper.h> | |
| #include "intel_drv.h" | |
| #include <drm/i915_drm.h> | |
| #include "i915_drv.h" | |
| static bool | |
| format_is_yuv(uint32_t format) | |
| { | |
| switch (format) { | |
| case DRM_FORMAT_YUYV: | |
| case DRM_FORMAT_UYVY: | |
| case DRM_FORMAT_VYUY: | |
| case DRM_FORMAT_YVYU: | |
| return true; | |
| default: | |
| return false; | |
| } | |
| } | |
| static int usecs_to_scanlines(const struct drm_display_mode *mode, int usecs) | |
| { | |
| /* paranoia */ | |
| if (!mode->crtc_htotal) | |
| return 1; | |
| return DIV_ROUND_UP(usecs * mode->crtc_clock, 1000 * mode->crtc_htotal); | |
| } | |
| /** | |
| * intel_pipe_update_start() - start update of a set of display registers | |
| * @crtc: the crtc of which the registers are going to be updated | |
| * @start_vbl_count: vblank counter return pointer used for error checking | |
| * | |
| * Mark the start of an update to pipe registers that should be updated | |
| * atomically regarding vblank. If the next vblank will happens within | |
| * the next 100 us, this function waits until the vblank passes. | |
| * | |
| * After a successful call to this function, interrupts will be disabled | |
| * until a subsequent call to intel_pipe_update_end(). That is done to | |
| * avoid random delays. The value written to @start_vbl_count should be | |
| * supplied to intel_pipe_update_end() for error checking. | |
| * | |
| * Return: true if the call was successful | |
| */ | |
| bool intel_pipe_update_start(struct intel_crtc *crtc, uint32_t *start_vbl_count) | |
| { | |
| struct drm_device *dev = crtc->base.dev; | |
| const struct drm_display_mode *mode = &crtc->config->base.adjusted_mode; | |
| enum pipe pipe = crtc->pipe; | |
| long timeout = msecs_to_jiffies_timeout(1); | |
| int scanline, min, max, vblank_start; | |
| wait_queue_head_t *wq = drm_crtc_vblank_waitqueue(&crtc->base); | |
| DEFINE_WAIT(wait); | |
| vblank_start = mode->crtc_vblank_start; | |
| if (mode->flags & DRM_MODE_FLAG_INTERLACE) | |
| vblank_start = DIV_ROUND_UP(vblank_start, 2); | |
| /* FIXME needs to be calibrated sensibly */ | |
| min = vblank_start - usecs_to_scanlines(mode, 100); | |
| max = vblank_start - 1; | |
| if (min <= 0 || max <= 0) | |
| return false; | |
| if (WARN_ON(drm_crtc_vblank_get(&crtc->base))) | |
| return false; | |
| local_irq_disable(); | |
| trace_i915_pipe_update_start(crtc, min, max); | |
| for (;;) { | |
| /* | |
| * prepare_to_wait() has a memory barrier, which guarantees | |
| * other CPUs can see the task state update by the time we | |
| * read the scanline. | |
| */ | |
| prepare_to_wait(wq, &wait, TASK_UNINTERRUPTIBLE); | |
| scanline = intel_get_crtc_scanline(crtc); | |
| if (scanline < min || scanline > max) | |
| break; | |
| if (timeout <= 0) { | |
| DRM_ERROR("Potential atomic update failure on pipe %c\n", | |
| pipe_name(crtc->pipe)); | |
| break; | |
| } | |
| local_irq_enable(); | |
| timeout = schedule_timeout(timeout); | |
| local_irq_disable(); | |
| } | |
| finish_wait(wq, &wait); | |
| drm_crtc_vblank_put(&crtc->base); | |
| *start_vbl_count = dev->driver->get_vblank_counter(dev, pipe); | |
| trace_i915_pipe_update_vblank_evaded(crtc, min, max, *start_vbl_count); | |
| return true; | |
| } | |
| /** | |
| * intel_pipe_update_end() - end update of a set of display registers | |
| * @crtc: the crtc of which the registers were updated | |
| * @start_vbl_count: start vblank counter (used for error checking) | |
| * | |
| * Mark the end of an update started with intel_pipe_update_start(). This | |
| * re-enables interrupts and verifies the update was actually completed | |
| * before a vblank using the value of @start_vbl_count. | |
| */ | |
| void intel_pipe_update_end(struct intel_crtc *crtc, u32 start_vbl_count) | |
| { | |
| struct drm_device *dev = crtc->base.dev; | |
| enum pipe pipe = crtc->pipe; | |
| u32 end_vbl_count = dev->driver->get_vblank_counter(dev, pipe); | |
| trace_i915_pipe_update_end(crtc, end_vbl_count); | |
| local_irq_enable(); | |
| if (start_vbl_count != end_vbl_count) | |
| DRM_ERROR("Atomic update failure on pipe %c (start=%u end=%u)\n", | |
| pipe_name(pipe), start_vbl_count, end_vbl_count); | |
| } | |
| static void intel_update_primary_plane(struct intel_crtc *crtc) | |
| { | |
| struct drm_i915_private *dev_priv = crtc->base.dev->dev_private; | |
| int reg = DSPCNTR(crtc->plane); | |
| if (crtc->primary_enabled) | |
| I915_WRITE(reg, I915_READ(reg) | DISPLAY_PLANE_ENABLE); | |
| else | |
| I915_WRITE(reg, I915_READ(reg) & ~DISPLAY_PLANE_ENABLE); | |
| } | |
| static void | |
| skl_update_plane(struct drm_plane *drm_plane, struct drm_crtc *crtc, | |
| struct drm_framebuffer *fb, | |
| int crtc_x, int crtc_y, | |
| unsigned int crtc_w, unsigned int crtc_h, | |
| uint32_t x, uint32_t y, | |
| uint32_t src_w, uint32_t src_h) | |
| { | |
| struct drm_device *dev = drm_plane->dev; | |
| struct drm_i915_private *dev_priv = dev->dev_private; | |
| struct intel_plane *intel_plane = to_intel_plane(drm_plane); | |
| struct drm_i915_gem_object *obj = intel_fb_obj(fb); | |
| const int pipe = intel_plane->pipe; | |
| const int plane = intel_plane->plane + 1; | |
| u32 plane_ctl, stride_div; | |
| int pixel_size = drm_format_plane_cpp(fb->pixel_format, 0); | |
| const struct drm_intel_sprite_colorkey *key = &intel_plane->ckey; | |
| unsigned long surf_addr; | |
| plane_ctl = PLANE_CTL_ENABLE | | |
| PLANE_CTL_PIPE_CSC_ENABLE; | |
| switch (fb->pixel_format) { | |
| case DRM_FORMAT_RGB565: | |
| plane_ctl |= PLANE_CTL_FORMAT_RGB_565; | |
| break; | |
| case DRM_FORMAT_XBGR8888: | |
| plane_ctl |= PLANE_CTL_FORMAT_XRGB_8888 | PLANE_CTL_ORDER_RGBX; | |
| break; | |
| case DRM_FORMAT_XRGB8888: | |
| plane_ctl |= PLANE_CTL_FORMAT_XRGB_8888; | |
| break; | |
| /* | |
| * XXX: For ARBG/ABGR formats we default to expecting scanout buffers | |
| * to be already pre-multiplied. We need to add a knob (or a different | |
| * DRM_FORMAT) for user-space to configure that. | |
| */ | |
| case DRM_FORMAT_ABGR8888: | |
| plane_ctl |= PLANE_CTL_FORMAT_XRGB_8888 | | |
| PLANE_CTL_ORDER_RGBX | | |
| PLANE_CTL_ALPHA_SW_PREMULTIPLY; | |
| break; | |
| case DRM_FORMAT_ARGB8888: | |
| plane_ctl |= PLANE_CTL_FORMAT_XRGB_8888 | | |
| PLANE_CTL_ALPHA_SW_PREMULTIPLY; | |
| break; | |
| case DRM_FORMAT_YUYV: | |
| plane_ctl |= PLANE_CTL_FORMAT_YUV422 | PLANE_CTL_YUV422_YUYV; | |
| break; | |
| case DRM_FORMAT_YVYU: | |
| plane_ctl |= PLANE_CTL_FORMAT_YUV422 | PLANE_CTL_YUV422_YVYU; | |
| break; | |
| case DRM_FORMAT_UYVY: | |
| plane_ctl |= PLANE_CTL_FORMAT_YUV422 | PLANE_CTL_YUV422_UYVY; | |
| break; | |
| case DRM_FORMAT_VYUY: | |
| plane_ctl |= PLANE_CTL_FORMAT_YUV422 | PLANE_CTL_YUV422_VYUY; | |
| break; | |
| default: | |
| BUG(); | |
| } | |
| switch (fb->modifier[0]) { | |
| case DRM_FORMAT_MOD_NONE: | |
| break; | |
| case I915_FORMAT_MOD_X_TILED: | |
| plane_ctl |= PLANE_CTL_TILED_X; | |
| break; | |
| case I915_FORMAT_MOD_Y_TILED: | |
| plane_ctl |= PLANE_CTL_TILED_Y; | |
| break; | |
| case I915_FORMAT_MOD_Yf_TILED: | |
| plane_ctl |= PLANE_CTL_TILED_YF; | |
| break; | |
| default: | |
| MISSING_CASE(fb->modifier[0]); | |
| } | |
| if (drm_plane->state->rotation == BIT(DRM_ROTATE_180)) | |
| plane_ctl |= PLANE_CTL_ROTATE_180; | |
| intel_update_sprite_watermarks(drm_plane, crtc, src_w, src_h, | |
| pixel_size, true, | |
| src_w != crtc_w || src_h != crtc_h); | |
| stride_div = intel_fb_stride_alignment(dev, fb->modifier[0], | |
| fb->pixel_format); | |
| /* Sizes are 0 based */ | |
| src_w--; | |
| src_h--; | |
| crtc_w--; | |
| crtc_h--; | |
| if (key->flags) { | |
| I915_WRITE(PLANE_KEYVAL(pipe, plane), key->min_value); | |
| I915_WRITE(PLANE_KEYMAX(pipe, plane), key->max_value); | |
| I915_WRITE(PLANE_KEYMSK(pipe, plane), key->channel_mask); | |
| } | |
| if (key->flags & I915_SET_COLORKEY_DESTINATION) | |
| plane_ctl |= PLANE_CTL_KEY_ENABLE_DESTINATION; | |
| else if (key->flags & I915_SET_COLORKEY_SOURCE) | |
| plane_ctl |= PLANE_CTL_KEY_ENABLE_SOURCE; | |
| surf_addr = intel_plane_obj_offset(intel_plane, obj); | |
| I915_WRITE(PLANE_OFFSET(pipe, plane), (y << 16) | x); | |
| I915_WRITE(PLANE_STRIDE(pipe, plane), fb->pitches[0] / stride_div); | |
| I915_WRITE(PLANE_POS(pipe, plane), (crtc_y << 16) | crtc_x); | |
| I915_WRITE(PLANE_SIZE(pipe, plane), (crtc_h << 16) | crtc_w); | |
| I915_WRITE(PLANE_CTL(pipe, plane), plane_ctl); | |
| I915_WRITE(PLANE_SURF(pipe, plane), surf_addr); | |
| POSTING_READ(PLANE_SURF(pipe, plane)); | |
| } | |
| static void | |
| skl_disable_plane(struct drm_plane *drm_plane, struct drm_crtc *crtc) | |
| { | |
| struct drm_device *dev = drm_plane->dev; | |
| struct drm_i915_private *dev_priv = dev->dev_private; | |
| struct intel_plane *intel_plane = to_intel_plane(drm_plane); | |
| const int pipe = intel_plane->pipe; | |
| const int plane = intel_plane->plane + 1; | |
| I915_WRITE(PLANE_CTL(pipe, plane), 0); | |
| /* Activate double buffered register update */ | |
| I915_WRITE(PLANE_SURF(pipe, plane), 0); | |
| POSTING_READ(PLANE_SURF(pipe, plane)); | |
| intel_update_sprite_watermarks(drm_plane, crtc, 0, 0, 0, false, false); | |
| } | |
| static void | |
| chv_update_csc(struct intel_plane *intel_plane, uint32_t format) | |
| { | |
| struct drm_i915_private *dev_priv = intel_plane->base.dev->dev_private; | |
| int plane = intel_plane->plane; | |
| /* Seems RGB data bypasses the CSC always */ | |
| if (!format_is_yuv(format)) | |
| return; | |
| /* | |
| * BT.601 limited range YCbCr -> full range RGB | |
| * | |
| * |r| | 6537 4769 0| |cr | | |
| * |g| = |-3330 4769 -1605| x |y-64| | |
| * |b| | 0 4769 8263| |cb | | |
| * | |
| * Cb and Cr apparently come in as signed already, so no | |
| * need for any offset. For Y we need to remove the offset. | |
| */ | |
| I915_WRITE(SPCSCYGOFF(plane), SPCSC_OOFF(0) | SPCSC_IOFF(-64)); | |
| I915_WRITE(SPCSCCBOFF(plane), SPCSC_OOFF(0) | SPCSC_IOFF(0)); | |
| I915_WRITE(SPCSCCROFF(plane), SPCSC_OOFF(0) | SPCSC_IOFF(0)); | |
| I915_WRITE(SPCSCC01(plane), SPCSC_C1(4769) | SPCSC_C0(6537)); | |
| I915_WRITE(SPCSCC23(plane), SPCSC_C1(-3330) | SPCSC_C0(0)); | |
| I915_WRITE(SPCSCC45(plane), SPCSC_C1(-1605) | SPCSC_C0(4769)); | |
| I915_WRITE(SPCSCC67(plane), SPCSC_C1(4769) | SPCSC_C0(0)); | |
| I915_WRITE(SPCSCC8(plane), SPCSC_C0(8263)); | |
| I915_WRITE(SPCSCYGICLAMP(plane), SPCSC_IMAX(940) | SPCSC_IMIN(64)); | |
| I915_WRITE(SPCSCCBICLAMP(plane), SPCSC_IMAX(448) | SPCSC_IMIN(-448)); | |
| I915_WRITE(SPCSCCRICLAMP(plane), SPCSC_IMAX(448) | SPCSC_IMIN(-448)); | |
| I915_WRITE(SPCSCYGOCLAMP(plane), SPCSC_OMAX(1023) | SPCSC_OMIN(0)); | |
| I915_WRITE(SPCSCCBOCLAMP(plane), SPCSC_OMAX(1023) | SPCSC_OMIN(0)); | |
| I915_WRITE(SPCSCCROCLAMP(plane), SPCSC_OMAX(1023) | SPCSC_OMIN(0)); | |
| } | |
| static void | |
| vlv_update_plane(struct drm_plane *dplane, struct drm_crtc *crtc, | |
| struct drm_framebuffer *fb, | |
| int crtc_x, int crtc_y, | |
| unsigned int crtc_w, unsigned int crtc_h, | |
| uint32_t x, uint32_t y, | |
| uint32_t src_w, uint32_t src_h) | |
| { | |
| struct drm_device *dev = dplane->dev; | |
| struct drm_i915_private *dev_priv = dev->dev_private; | |
| struct intel_plane *intel_plane = to_intel_plane(dplane); | |
| struct intel_crtc *intel_crtc = to_intel_crtc(crtc); | |
| struct drm_i915_gem_object *obj = intel_fb_obj(fb); | |
| int pipe = intel_plane->pipe; | |
| int plane = intel_plane->plane; | |
| u32 sprctl; | |
| unsigned long sprsurf_offset, linear_offset; | |
| int pixel_size = drm_format_plane_cpp(fb->pixel_format, 0); | |
| const struct drm_intel_sprite_colorkey *key = &intel_plane->ckey; | |
| sprctl = SP_ENABLE; | |
| switch (fb->pixel_format) { | |
| case DRM_FORMAT_YUYV: | |
| sprctl |= SP_FORMAT_YUV422 | SP_YUV_ORDER_YUYV; | |
| break; | |
| case DRM_FORMAT_YVYU: | |
| sprctl |= SP_FORMAT_YUV422 | SP_YUV_ORDER_YVYU; | |
| break; | |
| case DRM_FORMAT_UYVY: | |
| sprctl |= SP_FORMAT_YUV422 | SP_YUV_ORDER_UYVY; | |
| break; | |
| case DRM_FORMAT_VYUY: | |
| sprctl |= SP_FORMAT_YUV422 | SP_YUV_ORDER_VYUY; | |
| break; | |
| case DRM_FORMAT_RGB565: | |
| sprctl |= SP_FORMAT_BGR565; | |
| break; | |
| case DRM_FORMAT_XRGB8888: | |
| sprctl |= SP_FORMAT_BGRX8888; | |
| break; | |
| case DRM_FORMAT_ARGB8888: | |
| sprctl |= SP_FORMAT_BGRA8888; | |
| break; | |
| case DRM_FORMAT_XBGR2101010: | |
| sprctl |= SP_FORMAT_RGBX1010102; | |
| break; | |
| case DRM_FORMAT_ABGR2101010: | |
| sprctl |= SP_FORMAT_RGBA1010102; | |
| break; | |
| case DRM_FORMAT_XBGR8888: | |
| sprctl |= SP_FORMAT_RGBX8888; | |
| break; | |
| case DRM_FORMAT_ABGR8888: | |
| sprctl |= SP_FORMAT_RGBA8888; | |
| break; | |
| default: | |
| /* | |
| * If we get here one of the upper layers failed to filter | |
| * out the unsupported plane formats | |
| */ | |
| BUG(); | |
| break; | |
| } | |
| /* | |
| * Enable gamma to match primary/cursor plane behaviour. | |
| * FIXME should be user controllable via propertiesa. | |
| */ | |
| sprctl |= SP_GAMMA_ENABLE; | |
| if (obj->tiling_mode != I915_TILING_NONE) | |
| sprctl |= SP_TILED; | |
| intel_update_sprite_watermarks(dplane, crtc, src_w, src_h, | |
| pixel_size, true, | |
| src_w != crtc_w || src_h != crtc_h); | |
| /* Sizes are 0 based */ | |
| src_w--; | |
| src_h--; | |
| crtc_w--; | |
| crtc_h--; | |
| linear_offset = y * fb->pitches[0] + x * pixel_size; | |
| sprsurf_offset = intel_gen4_compute_page_offset(&x, &y, | |
| obj->tiling_mode, | |
| pixel_size, | |
| fb->pitches[0]); | |
| linear_offset -= sprsurf_offset; | |
| if (dplane->state->rotation == BIT(DRM_ROTATE_180)) { | |
| sprctl |= SP_ROTATE_180; | |
| x += src_w; | |
| y += src_h; | |
| linear_offset += src_h * fb->pitches[0] + src_w * pixel_size; | |
| } | |
| intel_update_primary_plane(intel_crtc); | |
| if (key->flags) { | |
| I915_WRITE(SPKEYMINVAL(pipe, plane), key->min_value); | |
| I915_WRITE(SPKEYMAXVAL(pipe, plane), key->max_value); | |
| I915_WRITE(SPKEYMSK(pipe, plane), key->channel_mask); | |
| } | |
| if (key->flags & I915_SET_COLORKEY_SOURCE) | |
| sprctl |= SP_SOURCE_KEY; | |
| if (IS_CHERRYVIEW(dev) && pipe == PIPE_B) | |
| chv_update_csc(intel_plane, fb->pixel_format); | |
| I915_WRITE(SPSTRIDE(pipe, plane), fb->pitches[0]); | |
| I915_WRITE(SPPOS(pipe, plane), (crtc_y << 16) | crtc_x); | |
| if (obj->tiling_mode != I915_TILING_NONE) | |
| I915_WRITE(SPTILEOFF(pipe, plane), (y << 16) | x); | |
| else | |
| I915_WRITE(SPLINOFF(pipe, plane), linear_offset); | |
| I915_WRITE(SPCONSTALPHA(pipe, plane), 0); | |
| I915_WRITE(SPSIZE(pipe, plane), (crtc_h << 16) | crtc_w); | |
| I915_WRITE(SPCNTR(pipe, plane), sprctl); | |
| I915_WRITE(SPSURF(pipe, plane), i915_gem_obj_ggtt_offset(obj) + | |
| sprsurf_offset); | |
| intel_flush_primary_plane(dev_priv, intel_crtc->plane); | |
| } | |
| static void | |
| vlv_disable_plane(struct drm_plane *dplane, struct drm_crtc *crtc) | |
| { | |
| struct drm_device *dev = dplane->dev; | |
| struct drm_i915_private *dev_priv = dev->dev_private; | |
| struct intel_plane *intel_plane = to_intel_plane(dplane); | |
| struct intel_crtc *intel_crtc = to_intel_crtc(crtc); | |
| int pipe = intel_plane->pipe; | |
| int plane = intel_plane->plane; | |
| intel_update_primary_plane(intel_crtc); | |
| I915_WRITE(SPCNTR(pipe, plane), 0); | |
| /* Activate double buffered register update */ | |
| I915_WRITE(SPSURF(pipe, plane), 0); | |
| intel_flush_primary_plane(dev_priv, intel_crtc->plane); | |
| intel_update_sprite_watermarks(dplane, crtc, 0, 0, 0, false, false); | |
| } | |
| static void | |
| ivb_update_plane(struct drm_plane *plane, struct drm_crtc *crtc, | |
| struct drm_framebuffer *fb, | |
| int crtc_x, int crtc_y, | |
| unsigned int crtc_w, unsigned int crtc_h, | |
| uint32_t x, uint32_t y, | |
| uint32_t src_w, uint32_t src_h) | |
| { | |
| struct drm_device *dev = plane->dev; | |
| struct drm_i915_private *dev_priv = dev->dev_private; | |
| struct intel_plane *intel_plane = to_intel_plane(plane); | |
| struct intel_crtc *intel_crtc = to_intel_crtc(crtc); | |
| struct drm_i915_gem_object *obj = intel_fb_obj(fb); | |
| enum pipe pipe = intel_plane->pipe; | |
| u32 sprctl, sprscale = 0; | |
| unsigned long sprsurf_offset, linear_offset; | |
| int pixel_size = drm_format_plane_cpp(fb->pixel_format, 0); | |
| const struct drm_intel_sprite_colorkey *key = &intel_plane->ckey; | |
| sprctl = SPRITE_ENABLE; | |
| switch (fb->pixel_format) { | |
| case DRM_FORMAT_XBGR8888: | |
| sprctl |= SPRITE_FORMAT_RGBX888 | SPRITE_RGB_ORDER_RGBX; | |
| break; | |
| case DRM_FORMAT_XRGB8888: | |
| sprctl |= SPRITE_FORMAT_RGBX888; | |
| break; | |
| case DRM_FORMAT_YUYV: | |
| sprctl |= SPRITE_FORMAT_YUV422 | SPRITE_YUV_ORDER_YUYV; | |
| break; | |
| case DRM_FORMAT_YVYU: | |
| sprctl |= SPRITE_FORMAT_YUV422 | SPRITE_YUV_ORDER_YVYU; | |
| break; | |
| case DRM_FORMAT_UYVY: | |
| sprctl |= SPRITE_FORMAT_YUV422 | SPRITE_YUV_ORDER_UYVY; | |
| break; | |
| case DRM_FORMAT_VYUY: | |
| sprctl |= SPRITE_FORMAT_YUV422 | SPRITE_YUV_ORDER_VYUY; | |
| break; | |
| default: | |
| BUG(); | |
| } | |
| /* | |
| * Enable gamma to match primary/cursor plane behaviour. | |
| * FIXME should be user controllable via propertiesa. | |
| */ | |
| sprctl |= SPRITE_GAMMA_ENABLE; | |
| if (obj->tiling_mode != I915_TILING_NONE) | |
| sprctl |= SPRITE_TILED; | |
| if (IS_HASWELL(dev) || IS_BROADWELL(dev)) | |
| sprctl &= ~SPRITE_TRICKLE_FEED_DISABLE; | |
| else | |
| sprctl |= SPRITE_TRICKLE_FEED_DISABLE; | |
| if (IS_HASWELL(dev) || IS_BROADWELL(dev)) | |
| sprctl |= SPRITE_PIPE_CSC_ENABLE; | |
| intel_update_sprite_watermarks(plane, crtc, src_w, src_h, pixel_size, | |
| true, | |
| src_w != crtc_w || src_h != crtc_h); | |
| /* Sizes are 0 based */ | |
| src_w--; | |
| src_h--; | |
| crtc_w--; | |
| crtc_h--; | |
| if (crtc_w != src_w || crtc_h != src_h) | |
| sprscale = SPRITE_SCALE_ENABLE | (src_w << 16) | src_h; | |
| linear_offset = y * fb->pitches[0] + x * pixel_size; | |
| sprsurf_offset = | |
| intel_gen4_compute_page_offset(&x, &y, obj->tiling_mode, | |
| pixel_size, fb->pitches[0]); | |
| linear_offset -= sprsurf_offset; | |
| if (plane->state->rotation == BIT(DRM_ROTATE_180)) { | |
| sprctl |= SPRITE_ROTATE_180; | |
| /* HSW and BDW does this automagically in hardware */ | |
| if (!IS_HASWELL(dev) && !IS_BROADWELL(dev)) { | |
| x += src_w; | |
| y += src_h; | |
| linear_offset += src_h * fb->pitches[0] + | |
| src_w * pixel_size; | |
| } | |
| } | |
| intel_update_primary_plane(intel_crtc); | |
| if (key->flags) { | |
| I915_WRITE(SPRKEYVAL(pipe), key->min_value); | |
| I915_WRITE(SPRKEYMAX(pipe), key->max_value); | |
| I915_WRITE(SPRKEYMSK(pipe), key->channel_mask); | |
| } | |
| if (key->flags & I915_SET_COLORKEY_DESTINATION) | |
| sprctl |= SPRITE_DEST_KEY; | |
| else if (key->flags & I915_SET_COLORKEY_SOURCE) | |
| sprctl |= SPRITE_SOURCE_KEY; | |
| I915_WRITE(SPRSTRIDE(pipe), fb->pitches[0]); | |
| I915_WRITE(SPRPOS(pipe), (crtc_y << 16) | crtc_x); | |
| /* HSW consolidates SPRTILEOFF and SPRLINOFF into a single SPROFFSET | |
| * register */ | |
| if (IS_HASWELL(dev) || IS_BROADWELL(dev)) | |
| I915_WRITE(SPROFFSET(pipe), (y << 16) | x); | |
| else if (obj->tiling_mode != I915_TILING_NONE) | |
| I915_WRITE(SPRTILEOFF(pipe), (y << 16) | x); | |
| else | |
| I915_WRITE(SPRLINOFF(pipe), linear_offset); | |
| I915_WRITE(SPRSIZE(pipe), (crtc_h << 16) | crtc_w); | |
| if (intel_plane->can_scale) | |
| I915_WRITE(SPRSCALE(pipe), sprscale); | |
| I915_WRITE(SPRCTL(pipe), sprctl); | |
| I915_WRITE(SPRSURF(pipe), | |
| i915_gem_obj_ggtt_offset(obj) + sprsurf_offset); | |
| intel_flush_primary_plane(dev_priv, intel_crtc->plane); | |
| } | |
| static void | |
| ivb_disable_plane(struct drm_plane *plane, struct drm_crtc *crtc) | |
| { | |
| struct drm_device *dev = plane->dev; | |
| struct drm_i915_private *dev_priv = dev->dev_private; | |
| struct intel_plane *intel_plane = to_intel_plane(plane); | |
| struct intel_crtc *intel_crtc = to_intel_crtc(crtc); | |
| int pipe = intel_plane->pipe; | |
| intel_update_primary_plane(intel_crtc); | |
| I915_WRITE(SPRCTL(pipe), I915_READ(SPRCTL(pipe)) & ~SPRITE_ENABLE); | |
| /* Can't leave the scaler enabled... */ | |
| if (intel_plane->can_scale) | |
| I915_WRITE(SPRSCALE(pipe), 0); | |
| /* Activate double buffered register update */ | |
| I915_WRITE(SPRSURF(pipe), 0); | |
| intel_flush_primary_plane(dev_priv, intel_crtc->plane); | |
| } | |
| static void | |
| ilk_update_plane(struct drm_plane *plane, struct drm_crtc *crtc, | |
| struct drm_framebuffer *fb, | |
| int crtc_x, int crtc_y, | |
| unsigned int crtc_w, unsigned int crtc_h, | |
| uint32_t x, uint32_t y, | |
| uint32_t src_w, uint32_t src_h) | |
| { | |
| struct drm_device *dev = plane->dev; | |
| struct drm_i915_private *dev_priv = dev->dev_private; | |
| struct intel_plane *intel_plane = to_intel_plane(plane); | |
| struct intel_crtc *intel_crtc = to_intel_crtc(crtc); | |
| struct drm_i915_gem_object *obj = intel_fb_obj(fb); | |
| int pipe = intel_plane->pipe; | |
| unsigned long dvssurf_offset, linear_offset; | |
| u32 dvscntr, dvsscale; | |
| int pixel_size = drm_format_plane_cpp(fb->pixel_format, 0); | |
| const struct drm_intel_sprite_colorkey *key = &intel_plane->ckey; | |
| dvscntr = DVS_ENABLE; | |
| switch (fb->pixel_format) { | |
| case DRM_FORMAT_XBGR8888: | |
| dvscntr |= DVS_FORMAT_RGBX888 | DVS_RGB_ORDER_XBGR; | |
| break; | |
| case DRM_FORMAT_XRGB8888: | |
| dvscntr |= DVS_FORMAT_RGBX888; | |
| break; | |
| case DRM_FORMAT_YUYV: | |
| dvscntr |= DVS_FORMAT_YUV422 | DVS_YUV_ORDER_YUYV; | |
| break; | |
| case DRM_FORMAT_YVYU: | |
| dvscntr |= DVS_FORMAT_YUV422 | DVS_YUV_ORDER_YVYU; | |
| break; | |
| case DRM_FORMAT_UYVY: | |
| dvscntr |= DVS_FORMAT_YUV422 | DVS_YUV_ORDER_UYVY; | |
| break; | |
| case DRM_FORMAT_VYUY: | |
| dvscntr |= DVS_FORMAT_YUV422 | DVS_YUV_ORDER_VYUY; | |
| break; | |
| default: | |
| BUG(); | |
| } | |
| /* | |
| * Enable gamma to match primary/cursor plane behaviour. | |
| * FIXME should be user controllable via propertiesa. | |
| */ | |
| dvscntr |= DVS_GAMMA_ENABLE; | |
| if (obj->tiling_mode != I915_TILING_NONE) | |
| dvscntr |= DVS_TILED; | |
| if (IS_GEN6(dev)) | |
| dvscntr |= DVS_TRICKLE_FEED_DISABLE; /* must disable */ | |
| intel_update_sprite_watermarks(plane, crtc, src_w, src_h, | |
| pixel_size, true, | |
| src_w != crtc_w || src_h != crtc_h); | |
| /* Sizes are 0 based */ | |
| src_w--; | |
| src_h--; | |
| crtc_w--; | |
| crtc_h--; | |
| dvsscale = 0; | |
| if (crtc_w != src_w || crtc_h != src_h) | |
| dvsscale = DVS_SCALE_ENABLE | (src_w << 16) | src_h; | |
| linear_offset = y * fb->pitches[0] + x * pixel_size; | |
| dvssurf_offset = | |
| intel_gen4_compute_page_offset(&x, &y, obj->tiling_mode, | |
| pixel_size, fb->pitches[0]); | |
| linear_offset -= dvssurf_offset; | |
| if (plane->state->rotation == BIT(DRM_ROTATE_180)) { | |
| dvscntr |= DVS_ROTATE_180; | |
| x += src_w; | |
| y += src_h; | |
| linear_offset += src_h * fb->pitches[0] + src_w * pixel_size; | |
| } | |
| intel_update_primary_plane(intel_crtc); | |
| if (key->flags) { | |
| I915_WRITE(DVSKEYVAL(pipe), key->min_value); | |
| I915_WRITE(DVSKEYMAX(pipe), key->max_value); | |
| I915_WRITE(DVSKEYMSK(pipe), key->channel_mask); | |
| } | |
| if (key->flags & I915_SET_COLORKEY_DESTINATION) | |
| dvscntr |= DVS_DEST_KEY; | |
| else if (key->flags & I915_SET_COLORKEY_SOURCE) | |
| dvscntr |= DVS_SOURCE_KEY; | |
| I915_WRITE(DVSSTRIDE(pipe), fb->pitches[0]); | |
| I915_WRITE(DVSPOS(pipe), (crtc_y << 16) | crtc_x); | |
| if (obj->tiling_mode != I915_TILING_NONE) | |
| I915_WRITE(DVSTILEOFF(pipe), (y << 16) | x); | |
| else | |
| I915_WRITE(DVSLINOFF(pipe), linear_offset); | |
| I915_WRITE(DVSSIZE(pipe), (crtc_h << 16) | crtc_w); | |
| I915_WRITE(DVSSCALE(pipe), dvsscale); | |
| I915_WRITE(DVSCNTR(pipe), dvscntr); | |
| I915_WRITE(DVSSURF(pipe), | |
| i915_gem_obj_ggtt_offset(obj) + dvssurf_offset); | |
| intel_flush_primary_plane(dev_priv, intel_crtc->plane); | |
| } | |
| static void | |
| ilk_disable_plane(struct drm_plane *plane, struct drm_crtc *crtc) | |
| { | |
| struct drm_device *dev = plane->dev; | |
| struct drm_i915_private *dev_priv = dev->dev_private; | |
| struct intel_plane *intel_plane = to_intel_plane(plane); | |
| struct intel_crtc *intel_crtc = to_intel_crtc(crtc); | |
| int pipe = intel_plane->pipe; | |
| intel_update_primary_plane(intel_crtc); | |
| I915_WRITE(DVSCNTR(pipe), 0); | |
| /* Disable the scaler */ | |
| I915_WRITE(DVSSCALE(pipe), 0); | |
| /* Flush double buffered register updates */ | |
| I915_WRITE(DVSSURF(pipe), 0); | |
| intel_flush_primary_plane(dev_priv, intel_crtc->plane); | |
| } | |
| /** | |
| * intel_post_enable_primary - Perform operations after enabling primary plane | |
| * @crtc: the CRTC whose primary plane was just enabled | |
| * | |
| * Performs potentially sleeping operations that must be done after the primary | |
| * plane is enabled, such as updating FBC and IPS. Note that this may be | |
| * called due to an explicit primary plane update, or due to an implicit | |
| * re-enable that is caused when a sprite plane is updated to no longer | |
| * completely hide the primary plane. | |
| */ | |
| void | |
| intel_post_enable_primary(struct drm_crtc *crtc) | |
| { | |
| struct drm_device *dev = crtc->dev; | |
| struct intel_crtc *intel_crtc = to_intel_crtc(crtc); | |
| /* | |
| * BDW signals flip done immediately if the plane | |
| * is disabled, even if the plane enable is already | |
| * armed to occur at the next vblank :( | |
| */ | |
| if (IS_BROADWELL(dev)) | |
| intel_wait_for_vblank(dev, intel_crtc->pipe); | |
| /* | |
| * FIXME IPS should be fine as long as one plane is | |
| * enabled, but in practice it seems to have problems | |
| * when going from primary only to sprite only and vice | |
| * versa. | |
| */ | |
| hsw_enable_ips(intel_crtc); | |
| mutex_lock(&dev->struct_mutex); | |
| intel_fbc_update(dev); | |
| mutex_unlock(&dev->struct_mutex); | |
| } | |
| /** | |
| * intel_pre_disable_primary - Perform operations before disabling primary plane | |
| * @crtc: the CRTC whose primary plane is to be disabled | |
| * | |
| * Performs potentially sleeping operations that must be done before the | |
| * primary plane is enabled, such as updating FBC and IPS. Note that this may | |
| * be called due to an explicit primary plane update, or due to an implicit | |
| * disable that is caused when a sprite plane completely hides the primary | |
| * plane. | |
| */ | |
| void | |
| intel_pre_disable_primary(struct drm_crtc *crtc) | |
| { | |
| struct drm_device *dev = crtc->dev; | |
| struct drm_i915_private *dev_priv = dev->dev_private; | |
| struct intel_crtc *intel_crtc = to_intel_crtc(crtc); | |
| mutex_lock(&dev->struct_mutex); | |
| if (dev_priv->fbc.crtc == intel_crtc) | |
| intel_fbc_disable(dev); | |
| mutex_unlock(&dev->struct_mutex); | |
| /* | |
| * FIXME IPS should be fine as long as one plane is | |
| * enabled, but in practice it seems to have problems | |
| * when going from primary only to sprite only and vice | |
| * versa. | |
| */ | |
| hsw_disable_ips(intel_crtc); | |
| } | |
| static bool colorkey_enabled(struct intel_plane *intel_plane) | |
| { | |
| return intel_plane->ckey.flags != I915_SET_COLORKEY_NONE; | |
| } | |
| static int | |
| intel_check_sprite_plane(struct drm_plane *plane, | |
| struct intel_plane_state *state) | |
| { | |
| struct intel_crtc *intel_crtc = to_intel_crtc(state->base.crtc); | |
| struct intel_plane *intel_plane = to_intel_plane(plane); | |
| struct drm_framebuffer *fb = state->base.fb; | |
| int crtc_x, crtc_y; | |
| unsigned int crtc_w, crtc_h; | |
| uint32_t src_x, src_y, src_w, src_h; | |
| struct drm_rect *src = &state->src; | |
| struct drm_rect *dst = &state->dst; | |
| const struct drm_rect *clip = &state->clip; | |
| int hscale, vscale; | |
| int max_scale, min_scale; | |
| int pixel_size; | |
| intel_crtc = intel_crtc ? intel_crtc : to_intel_crtc(plane->crtc); | |
| if (!fb) { | |
| state->visible = false; | |
| goto finish; | |
| } | |
| /* Don't modify another pipe's plane */ | |
| if (intel_plane->pipe != intel_crtc->pipe) { | |
| DRM_DEBUG_KMS("Wrong plane <-> crtc mapping\n"); | |
| return -EINVAL; | |
| } | |
| /* FIXME check all gen limits */ | |
| if (fb->width < 3 || fb->height < 3 || fb->pitches[0] > 16384) { | |
| DRM_DEBUG_KMS("Unsuitable framebuffer for plane\n"); | |
| return -EINVAL; | |
| } | |
| /* | |
| * FIXME the following code does a bunch of fuzzy adjustments to the | |
| * coordinates and sizes. We probably need some way to decide whether | |
| * more strict checking should be done instead. | |
| */ | |
| max_scale = intel_plane->max_downscale << 16; | |
| min_scale = intel_plane->can_scale ? 1 : (1 << 16); | |
| drm_rect_rotate(src, fb->width << 16, fb->height << 16, | |
| state->base.rotation); | |
| hscale = drm_rect_calc_hscale_relaxed(src, dst, min_scale, max_scale); | |
| BUG_ON(hscale < 0); | |
| vscale = drm_rect_calc_vscale_relaxed(src, dst, min_scale, max_scale); | |
| BUG_ON(vscale < 0); | |
| state->visible = drm_rect_clip_scaled(src, dst, clip, hscale, vscale); | |
| crtc_x = dst->x1; | |
| crtc_y = dst->y1; | |
| crtc_w = drm_rect_width(dst); | |
| crtc_h = drm_rect_height(dst); | |
| if (state->visible) { | |
| /* check again in case clipping clamped the results */ | |
| hscale = drm_rect_calc_hscale(src, dst, min_scale, max_scale); | |
| if (hscale < 0) { | |
| DRM_DEBUG_KMS("Horizontal scaling factor out of limits\n"); | |
| drm_rect_debug_print(src, true); | |
| drm_rect_debug_print(dst, false); | |
| return hscale; | |
| } | |
| vscale = drm_rect_calc_vscale(src, dst, min_scale, max_scale); | |
| if (vscale < 0) { | |
| DRM_DEBUG_KMS("Vertical scaling factor out of limits\n"); | |
| drm_rect_debug_print(src, true); | |
| drm_rect_debug_print(dst, false); | |
| return vscale; | |
| } | |
| /* Make the source viewport size an exact multiple of the scaling factors. */ | |
| drm_rect_adjust_size(src, | |
| drm_rect_width(dst) * hscale - drm_rect_width(src), | |
| drm_rect_height(dst) * vscale - drm_rect_height(src)); | |
| drm_rect_rotate_inv(src, fb->width << 16, fb->height << 16, | |
| state->base.rotation); | |
| /* sanity check to make sure the src viewport wasn't enlarged */ | |
| WARN_ON(src->x1 < (int) state->base.src_x || | |
| src->y1 < (int) state->base.src_y || | |
| src->x2 > (int) state->base.src_x + state->base.src_w || | |
| src->y2 > (int) state->base.src_y + state->base.src_h); | |
| /* | |
| * Hardware doesn't handle subpixel coordinates. | |
| * Adjust to (macro)pixel boundary, but be careful not to | |
| * increase the source viewport size, because that could | |
| * push the downscaling factor out of bounds. | |
| */ | |
| src_x = src->x1 >> 16; | |
| src_w = drm_rect_width(src) >> 16; | |
| src_y = src->y1 >> 16; | |
| src_h = drm_rect_height(src) >> 16; | |
| if (format_is_yuv(fb->pixel_format)) { | |
| src_x &= ~1; | |
| src_w &= ~1; | |
| /* | |
| * Must keep src and dst the | |
| * same if we can't scale. | |
| */ | |
| if (!intel_plane->can_scale) | |
| crtc_w &= ~1; | |
| if (crtc_w == 0) | |
| state->visible = false; | |
| } | |
| } | |
| /* Check size restrictions when scaling */ | |
| if (state->visible && (src_w != crtc_w || src_h != crtc_h)) { | |
| unsigned int width_bytes; | |
| WARN_ON(!intel_plane->can_scale); | |
| /* FIXME interlacing min height is 6 */ | |
| if (crtc_w < 3 || crtc_h < 3) | |
| state->visible = false; | |
| if (src_w < 3 || src_h < 3) | |
| state->visible = false; | |
| pixel_size = drm_format_plane_cpp(fb->pixel_format, 0); | |
| width_bytes = ((src_x * pixel_size) & 63) + | |
| src_w * pixel_size; | |
| if (src_w > 2048 || src_h > 2048 || | |
| width_bytes > 4096 || fb->pitches[0] > 4096) { | |
| DRM_DEBUG_KMS("Source dimensions exceed hardware limits\n"); | |
| return -EINVAL; | |
| } | |
| } | |
| if (state->visible) { | |
| src->x1 = src_x; | |
| src->x2 = src_x + src_w; | |
| src->y1 = src_y; | |
| src->y2 = src_y + src_h; | |
| } | |
| dst->x1 = crtc_x; | |
| dst->x2 = crtc_x + crtc_w; | |
| dst->y1 = crtc_y; | |
| dst->y2 = crtc_y + crtc_h; | |
| finish: | |
| /* | |
| * If the sprite is completely covering the primary plane, | |
| * we can disable the primary and save power. | |
| */ | |
| state->hides_primary = fb != NULL && drm_rect_equals(dst, clip) && | |
| !colorkey_enabled(intel_plane); | |
| WARN_ON(state->hides_primary && !state->visible && intel_crtc->active); | |
| if (intel_crtc->active) { | |
| if (intel_crtc->primary_enabled == state->hides_primary) | |
| intel_crtc->atomic.wait_for_flips = true; | |
| if (intel_crtc->primary_enabled && state->hides_primary) | |
| intel_crtc->atomic.pre_disable_primary = true; | |
| intel_crtc->atomic.fb_bits |= | |
| INTEL_FRONTBUFFER_SPRITE(intel_crtc->pipe); | |
| if (!intel_crtc->primary_enabled && !state->hides_primary) | |
| intel_crtc->atomic.post_enable_primary = true; | |
| if (intel_wm_need_update(plane, &state->base)) | |
| intel_crtc->atomic.update_wm = true; | |
| if (!state->visible) { | |
| /* | |
| * Avoid underruns when disabling the sprite. | |
| * FIXME remove once watermark updates are done properly. | |
| */ | |
| intel_crtc->atomic.wait_vblank = true; | |
| intel_crtc->atomic.update_sprite_watermarks |= | |
| (1 << drm_plane_index(plane)); | |
| } | |
| } | |
| return 0; | |
| } | |
| static void | |
| intel_commit_sprite_plane(struct drm_plane *plane, | |
| struct intel_plane_state *state) | |
| { | |
| struct drm_crtc *crtc = state->base.crtc; | |
| struct intel_crtc *intel_crtc; | |
| struct intel_plane *intel_plane = to_intel_plane(plane); | |
| struct drm_framebuffer *fb = state->base.fb; | |
| int crtc_x, crtc_y; | |
| unsigned int crtc_w, crtc_h; | |
| uint32_t src_x, src_y, src_w, src_h; | |
| crtc = crtc ? crtc : plane->crtc; | |
| intel_crtc = to_intel_crtc(crtc); | |
| plane->fb = fb; | |
| if (intel_crtc->active) { | |
| intel_crtc->primary_enabled = !state->hides_primary; | |
| if (state->visible) { | |
| crtc_x = state->dst.x1; | |
| crtc_y = state->dst.y1; | |
| crtc_w = drm_rect_width(&state->dst); | |
| crtc_h = drm_rect_height(&state->dst); | |
| src_x = state->src.x1; | |
| src_y = state->src.y1; | |
| src_w = drm_rect_width(&state->src); | |
| src_h = drm_rect_height(&state->src); | |
| intel_plane->update_plane(plane, crtc, fb, | |
| crtc_x, crtc_y, crtc_w, crtc_h, | |
| src_x, src_y, src_w, src_h); | |
| } else { | |
| intel_plane->disable_plane(plane, crtc); | |
| } | |
| } | |
| } | |
| int intel_sprite_set_colorkey(struct drm_device *dev, void *data, | |
| struct drm_file *file_priv) | |
| { | |
| struct drm_intel_sprite_colorkey *set = data; | |
| struct drm_plane *plane; | |
| struct intel_plane *intel_plane; | |
| int ret = 0; | |
| /* Make sure we don't try to enable both src & dest simultaneously */ | |
| if ((set->flags & (I915_SET_COLORKEY_DESTINATION | I915_SET_COLORKEY_SOURCE)) == (I915_SET_COLORKEY_DESTINATION | I915_SET_COLORKEY_SOURCE)) | |
| return -EINVAL; | |
| if (IS_VALLEYVIEW(dev) && | |
| set->flags & I915_SET_COLORKEY_DESTINATION) | |
| return -EINVAL; | |
| drm_modeset_lock_all(dev); | |
| plane = drm_plane_find(dev, set->plane_id); | |
| if (!plane || plane->type != DRM_PLANE_TYPE_OVERLAY) { | |
| ret = -ENOENT; | |
| goto out_unlock; | |
| } | |
| intel_plane = to_intel_plane(plane); | |
| intel_plane->ckey = *set; | |
| /* | |
| * The only way this could fail would be due to | |
| * the current plane state being unsupportable already, | |
| * and we dont't consider that an error for the | |
| * colorkey ioctl. So just ignore any error. | |
| */ | |
| intel_plane_restore(plane); | |
| out_unlock: | |
| drm_modeset_unlock_all(dev); | |
| return ret; | |
| } | |
| int intel_plane_restore(struct drm_plane *plane) | |
| { | |
| if (!plane->crtc || !plane->state->fb) | |
| return 0; | |
| return plane->funcs->update_plane(plane, plane->crtc, plane->state->fb, | |
| plane->state->crtc_x, plane->state->crtc_y, | |
| plane->state->crtc_w, plane->state->crtc_h, | |
| plane->state->src_x, plane->state->src_y, | |
| plane->state->src_w, plane->state->src_h); | |
| } | |
| static uint32_t ilk_plane_formats[] = { | |
| DRM_FORMAT_XRGB8888, | |
| DRM_FORMAT_YUYV, | |
| DRM_FORMAT_YVYU, | |
| DRM_FORMAT_UYVY, | |
| DRM_FORMAT_VYUY, | |
| }; | |
| static uint32_t snb_plane_formats[] = { | |
| DRM_FORMAT_XBGR8888, | |
| DRM_FORMAT_XRGB8888, | |
| DRM_FORMAT_YUYV, | |
| DRM_FORMAT_YVYU, | |
| DRM_FORMAT_UYVY, | |
| DRM_FORMAT_VYUY, | |
| }; | |
| static uint32_t vlv_plane_formats[] = { | |
| DRM_FORMAT_RGB565, | |
| DRM_FORMAT_ABGR8888, | |
| DRM_FORMAT_ARGB8888, | |
| DRM_FORMAT_XBGR8888, | |
| DRM_FORMAT_XRGB8888, | |
| DRM_FORMAT_XBGR2101010, | |
| DRM_FORMAT_ABGR2101010, | |
| DRM_FORMAT_YUYV, | |
| DRM_FORMAT_YVYU, | |
| DRM_FORMAT_UYVY, | |
| DRM_FORMAT_VYUY, | |
| }; | |
| static uint32_t skl_plane_formats[] = { | |
| DRM_FORMAT_RGB565, | |
| DRM_FORMAT_ABGR8888, | |
| DRM_FORMAT_ARGB8888, | |
| DRM_FORMAT_XBGR8888, | |
| DRM_FORMAT_XRGB8888, | |
| DRM_FORMAT_YUYV, | |
| DRM_FORMAT_YVYU, | |
| DRM_FORMAT_UYVY, | |
| DRM_FORMAT_VYUY, | |
| }; | |
| int | |
| intel_plane_init(struct drm_device *dev, enum pipe pipe, int plane) | |
| { | |
| struct intel_plane *intel_plane; | |
| struct intel_plane_state *state; | |
| unsigned long possible_crtcs; | |
| const uint32_t *plane_formats; | |
| int num_plane_formats; | |
| int ret; | |
| if (INTEL_INFO(dev)->gen < 5) | |
| return -ENODEV; | |
| intel_plane = kzalloc(sizeof(*intel_plane), GFP_KERNEL); | |
| if (!intel_plane) | |
| return -ENOMEM; | |
| state = intel_create_plane_state(&intel_plane->base); | |
| if (!state) { | |
| kfree(intel_plane); | |
| return -ENOMEM; | |
| } | |
| intel_plane->base.state = &state->base; | |
| switch (INTEL_INFO(dev)->gen) { | |
| case 5: | |
| case 6: | |
| intel_plane->can_scale = true; | |
| intel_plane->max_downscale = 16; | |
| intel_plane->update_plane = ilk_update_plane; | |
| intel_plane->disable_plane = ilk_disable_plane; | |
| if (IS_GEN6(dev)) { | |
| plane_formats = snb_plane_formats; | |
| num_plane_formats = ARRAY_SIZE(snb_plane_formats); | |
| } else { | |
| plane_formats = ilk_plane_formats; | |
| num_plane_formats = ARRAY_SIZE(ilk_plane_formats); | |
| } | |
| break; | |
| case 7: | |
| case 8: | |
| if (IS_IVYBRIDGE(dev)) { | |
| intel_plane->can_scale = true; | |
| intel_plane->max_downscale = 2; | |
| } else { | |
| intel_plane->can_scale = false; | |
| intel_plane->max_downscale = 1; | |
| } | |
| if (IS_VALLEYVIEW(dev)) { | |
| intel_plane->update_plane = vlv_update_plane; | |
| intel_plane->disable_plane = vlv_disable_plane; | |
| plane_formats = vlv_plane_formats; | |
| num_plane_formats = ARRAY_SIZE(vlv_plane_formats); | |
| } else { | |
| intel_plane->update_plane = ivb_update_plane; | |
| intel_plane->disable_plane = ivb_disable_plane; | |
| plane_formats = snb_plane_formats; | |
| num_plane_formats = ARRAY_SIZE(snb_plane_formats); | |
| } | |
| break; | |
| case 9: | |
| /* | |
| * FIXME: Skylake planes can be scaled (with some restrictions), | |
| * but this is for another time. | |
| */ | |
| intel_plane->can_scale = false; | |
| intel_plane->max_downscale = 1; | |
| intel_plane->update_plane = skl_update_plane; | |
| intel_plane->disable_plane = skl_disable_plane; | |
| plane_formats = skl_plane_formats; | |
| num_plane_formats = ARRAY_SIZE(skl_plane_formats); | |
| break; | |
| default: | |
| kfree(intel_plane); | |
| return -ENODEV; | |
| } | |
| intel_plane->pipe = pipe; | |
| intel_plane->plane = plane; | |
| intel_plane->check_plane = intel_check_sprite_plane; | |
| intel_plane->commit_plane = intel_commit_sprite_plane; | |
| possible_crtcs = (1 << pipe); | |
| ret = drm_universal_plane_init(dev, &intel_plane->base, possible_crtcs, | |
| &intel_plane_funcs, | |
| plane_formats, num_plane_formats, | |
| DRM_PLANE_TYPE_OVERLAY); | |
| if (ret) { | |
| kfree(intel_plane); | |
| goto out; | |
| } | |
| if (!dev->mode_config.rotation_property) | |
| dev->mode_config.rotation_property = | |
| drm_mode_create_rotation_property(dev, | |
| BIT(DRM_ROTATE_0) | | |
| BIT(DRM_ROTATE_180)); | |
| if (dev->mode_config.rotation_property) | |
| drm_object_attach_property(&intel_plane->base.base, | |
| dev->mode_config.rotation_property, | |
| state->base.rotation); | |
| drm_plane_helper_add(&intel_plane->base, &intel_plane_helper_funcs); | |
| out: | |
| return ret; | |
| } |