| /* | |
| * Copyright 2002-2005, Instant802 Networks, Inc. | |
| * Copyright 2005-2006, Devicescape Software, Inc. | |
| * Copyright 2006-2007 Jiri Benc <jbenc@suse.cz> | |
| * Copyright 2007 Johannes Berg <johannes@sipsolutions.net> | |
| * | |
| * This program is free software; you can redistribute it and/or modify | |
| * it under the terms of the GNU General Public License version 2 as | |
| * published by the Free Software Foundation. | |
| * | |
| * | |
| * Transmit and frame generation functions. | |
| */ | |
| #include <linux/kernel.h> | |
| #include <linux/slab.h> | |
| #include <linux/skbuff.h> | |
| #include <linux/etherdevice.h> | |
| #include <linux/bitmap.h> | |
| #include <linux/rcupdate.h> | |
| #include <net/net_namespace.h> | |
| #include <net/ieee80211_radiotap.h> | |
| #include <net/cfg80211.h> | |
| #include <net/mac80211.h> | |
| #include <asm/unaligned.h> | |
| #include "ieee80211_i.h" | |
| #include "ieee80211_led.h" | |
| #include "wep.h" | |
| #include "wpa.h" | |
| #include "wme.h" | |
| #include "ieee80211_rate.h" | |
| #define IEEE80211_TX_OK 0 | |
| #define IEEE80211_TX_AGAIN 1 | |
| #define IEEE80211_TX_FRAG_AGAIN 2 | |
| /* misc utils */ | |
| static inline void ieee80211_include_sequence(struct ieee80211_sub_if_data *sdata, | |
| struct ieee80211_hdr *hdr) | |
| { | |
| /* Set the sequence number for this frame. */ | |
| hdr->seq_ctrl = cpu_to_le16(sdata->sequence); | |
| /* Increase the sequence number. */ | |
| sdata->sequence = (sdata->sequence + 0x10) & IEEE80211_SCTL_SEQ; | |
| } | |
| #ifdef CONFIG_MAC80211_LOWTX_FRAME_DUMP | |
| static void ieee80211_dump_frame(const char *ifname, const char *title, | |
| const struct sk_buff *skb) | |
| { | |
| const struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data; | |
| u16 fc; | |
| int hdrlen; | |
| DECLARE_MAC_BUF(mac); | |
| printk(KERN_DEBUG "%s: %s (len=%d)", ifname, title, skb->len); | |
| if (skb->len < 4) { | |
| printk("\n"); | |
| return; | |
| } | |
| fc = le16_to_cpu(hdr->frame_control); | |
| hdrlen = ieee80211_get_hdrlen(fc); | |
| if (hdrlen > skb->len) | |
| hdrlen = skb->len; | |
| if (hdrlen >= 4) | |
| printk(" FC=0x%04x DUR=0x%04x", | |
| fc, le16_to_cpu(hdr->duration_id)); | |
| if (hdrlen >= 10) | |
| printk(" A1=%s", print_mac(mac, hdr->addr1)); | |
| if (hdrlen >= 16) | |
| printk(" A2=%s", print_mac(mac, hdr->addr2)); | |
| if (hdrlen >= 24) | |
| printk(" A3=%s", print_mac(mac, hdr->addr3)); | |
| if (hdrlen >= 30) | |
| printk(" A4=%s", print_mac(mac, hdr->addr4)); | |
| printk("\n"); | |
| } | |
| #else /* CONFIG_MAC80211_LOWTX_FRAME_DUMP */ | |
| static inline void ieee80211_dump_frame(const char *ifname, const char *title, | |
| struct sk_buff *skb) | |
| { | |
| } | |
| #endif /* CONFIG_MAC80211_LOWTX_FRAME_DUMP */ | |
| static u16 ieee80211_duration(struct ieee80211_txrx_data *tx, int group_addr, | |
| int next_frag_len) | |
| { | |
| int rate, mrate, erp, dur, i; | |
| struct ieee80211_rate *txrate = tx->u.tx.rate; | |
| struct ieee80211_local *local = tx->local; | |
| struct ieee80211_hw_mode *mode = tx->u.tx.mode; | |
| erp = txrate->flags & IEEE80211_RATE_ERP; | |
| /* | |
| * data and mgmt (except PS Poll): | |
| * - during CFP: 32768 | |
| * - during contention period: | |
| * if addr1 is group address: 0 | |
| * if more fragments = 0 and addr1 is individual address: time to | |
| * transmit one ACK plus SIFS | |
| * if more fragments = 1 and addr1 is individual address: time to | |
| * transmit next fragment plus 2 x ACK plus 3 x SIFS | |
| * | |
| * IEEE 802.11, 9.6: | |
| * - control response frame (CTS or ACK) shall be transmitted using the | |
| * same rate as the immediately previous frame in the frame exchange | |
| * sequence, if this rate belongs to the PHY mandatory rates, or else | |
| * at the highest possible rate belonging to the PHY rates in the | |
| * BSSBasicRateSet | |
| */ | |
| if ((tx->fc & IEEE80211_FCTL_FTYPE) == IEEE80211_FTYPE_CTL) { | |
| /* TODO: These control frames are not currently sent by | |
| * 80211.o, but should they be implemented, this function | |
| * needs to be updated to support duration field calculation. | |
| * | |
| * RTS: time needed to transmit pending data/mgmt frame plus | |
| * one CTS frame plus one ACK frame plus 3 x SIFS | |
| * CTS: duration of immediately previous RTS minus time | |
| * required to transmit CTS and its SIFS | |
| * ACK: 0 if immediately previous directed data/mgmt had | |
| * more=0, with more=1 duration in ACK frame is duration | |
| * from previous frame minus time needed to transmit ACK | |
| * and its SIFS | |
| * PS Poll: BIT(15) | BIT(14) | aid | |
| */ | |
| return 0; | |
| } | |
| /* data/mgmt */ | |
| if (0 /* FIX: data/mgmt during CFP */) | |
| return 32768; | |
| if (group_addr) /* Group address as the destination - no ACK */ | |
| return 0; | |
| /* Individual destination address: | |
| * IEEE 802.11, Ch. 9.6 (after IEEE 802.11g changes) | |
| * CTS and ACK frames shall be transmitted using the highest rate in | |
| * basic rate set that is less than or equal to the rate of the | |
| * immediately previous frame and that is using the same modulation | |
| * (CCK or OFDM). If no basic rate set matches with these requirements, | |
| * the highest mandatory rate of the PHY that is less than or equal to | |
| * the rate of the previous frame is used. | |
| * Mandatory rates for IEEE 802.11g PHY: 1, 2, 5.5, 11, 6, 12, 24 Mbps | |
| */ | |
| rate = -1; | |
| mrate = 10; /* use 1 Mbps if everything fails */ | |
| for (i = 0; i < mode->num_rates; i++) { | |
| struct ieee80211_rate *r = &mode->rates[i]; | |
| if (r->rate > txrate->rate) | |
| break; | |
| if (IEEE80211_RATE_MODULATION(txrate->flags) != | |
| IEEE80211_RATE_MODULATION(r->flags)) | |
| continue; | |
| if (r->flags & IEEE80211_RATE_BASIC) | |
| rate = r->rate; | |
| else if (r->flags & IEEE80211_RATE_MANDATORY) | |
| mrate = r->rate; | |
| } | |
| if (rate == -1) { | |
| /* No matching basic rate found; use highest suitable mandatory | |
| * PHY rate */ | |
| rate = mrate; | |
| } | |
| /* Time needed to transmit ACK | |
| * (10 bytes + 4-byte FCS = 112 bits) plus SIFS; rounded up | |
| * to closest integer */ | |
| dur = ieee80211_frame_duration(local, 10, rate, erp, | |
| tx->sdata->flags & IEEE80211_SDATA_SHORT_PREAMBLE); | |
| if (next_frag_len) { | |
| /* Frame is fragmented: duration increases with time needed to | |
| * transmit next fragment plus ACK and 2 x SIFS. */ | |
| dur *= 2; /* ACK + SIFS */ | |
| /* next fragment */ | |
| dur += ieee80211_frame_duration(local, next_frag_len, | |
| txrate->rate, erp, | |
| tx->sdata->flags & | |
| IEEE80211_SDATA_SHORT_PREAMBLE); | |
| } | |
| return dur; | |
| } | |
| static inline int __ieee80211_queue_stopped(const struct ieee80211_local *local, | |
| int queue) | |
| { | |
| return test_bit(IEEE80211_LINK_STATE_XOFF, &local->state[queue]); | |
| } | |
| static inline int __ieee80211_queue_pending(const struct ieee80211_local *local, | |
| int queue) | |
| { | |
| return test_bit(IEEE80211_LINK_STATE_PENDING, &local->state[queue]); | |
| } | |
| static int inline is_ieee80211_device(struct net_device *dev, | |
| struct net_device *master) | |
| { | |
| return (wdev_priv(dev->ieee80211_ptr) == | |
| wdev_priv(master->ieee80211_ptr)); | |
| } | |
| /* tx handlers */ | |
| static ieee80211_txrx_result | |
| ieee80211_tx_h_check_assoc(struct ieee80211_txrx_data *tx) | |
| { | |
| #ifdef CONFIG_MAC80211_VERBOSE_DEBUG | |
| struct sk_buff *skb = tx->skb; | |
| struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data; | |
| #endif /* CONFIG_MAC80211_VERBOSE_DEBUG */ | |
| u32 sta_flags; | |
| if (unlikely(tx->flags & IEEE80211_TXRXD_TX_INJECTED)) | |
| return TXRX_CONTINUE; | |
| if (unlikely(tx->local->sta_scanning != 0) && | |
| ((tx->fc & IEEE80211_FCTL_FTYPE) != IEEE80211_FTYPE_MGMT || | |
| (tx->fc & IEEE80211_FCTL_STYPE) != IEEE80211_STYPE_PROBE_REQ)) | |
| return TXRX_DROP; | |
| if (tx->flags & IEEE80211_TXRXD_TXPS_BUFFERED) | |
| return TXRX_CONTINUE; | |
| sta_flags = tx->sta ? tx->sta->flags : 0; | |
| if (likely(tx->flags & IEEE80211_TXRXD_TXUNICAST)) { | |
| if (unlikely(!(sta_flags & WLAN_STA_ASSOC) && | |
| tx->sdata->type != IEEE80211_IF_TYPE_IBSS && | |
| (tx->fc & IEEE80211_FCTL_FTYPE) == IEEE80211_FTYPE_DATA)) { | |
| #ifdef CONFIG_MAC80211_VERBOSE_DEBUG | |
| DECLARE_MAC_BUF(mac); | |
| printk(KERN_DEBUG "%s: dropped data frame to not " | |
| "associated station %s\n", | |
| tx->dev->name, print_mac(mac, hdr->addr1)); | |
| #endif /* CONFIG_MAC80211_VERBOSE_DEBUG */ | |
| I802_DEBUG_INC(tx->local->tx_handlers_drop_not_assoc); | |
| return TXRX_DROP; | |
| } | |
| } else { | |
| if (unlikely((tx->fc & IEEE80211_FCTL_FTYPE) == IEEE80211_FTYPE_DATA && | |
| tx->local->num_sta == 0 && | |
| tx->sdata->type != IEEE80211_IF_TYPE_IBSS)) { | |
| /* | |
| * No associated STAs - no need to send multicast | |
| * frames. | |
| */ | |
| return TXRX_DROP; | |
| } | |
| return TXRX_CONTINUE; | |
| } | |
| if (unlikely(/* !injected && */ tx->sdata->ieee802_1x && | |
| !(sta_flags & WLAN_STA_AUTHORIZED))) { | |
| #ifdef CONFIG_MAC80211_VERBOSE_DEBUG | |
| DECLARE_MAC_BUF(mac); | |
| printk(KERN_DEBUG "%s: dropped frame to %s" | |
| " (unauthorized port)\n", tx->dev->name, | |
| print_mac(mac, hdr->addr1)); | |
| #endif | |
| I802_DEBUG_INC(tx->local->tx_handlers_drop_unauth_port); | |
| return TXRX_DROP; | |
| } | |
| return TXRX_CONTINUE; | |
| } | |
| static ieee80211_txrx_result | |
| ieee80211_tx_h_sequence(struct ieee80211_txrx_data *tx) | |
| { | |
| struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)tx->skb->data; | |
| if (ieee80211_get_hdrlen(le16_to_cpu(hdr->frame_control)) >= 24) | |
| ieee80211_include_sequence(tx->sdata, hdr); | |
| return TXRX_CONTINUE; | |
| } | |
| /* This function is called whenever the AP is about to exceed the maximum limit | |
| * of buffered frames for power saving STAs. This situation should not really | |
| * happen often during normal operation, so dropping the oldest buffered packet | |
| * from each queue should be OK to make some room for new frames. */ | |
| static void purge_old_ps_buffers(struct ieee80211_local *local) | |
| { | |
| int total = 0, purged = 0; | |
| struct sk_buff *skb; | |
| struct ieee80211_sub_if_data *sdata; | |
| struct sta_info *sta; | |
| /* | |
| * virtual interfaces are protected by RCU | |
| */ | |
| rcu_read_lock(); | |
| list_for_each_entry_rcu(sdata, &local->interfaces, list) { | |
| struct ieee80211_if_ap *ap; | |
| if (sdata->dev == local->mdev || | |
| sdata->type != IEEE80211_IF_TYPE_AP) | |
| continue; | |
| ap = &sdata->u.ap; | |
| skb = skb_dequeue(&ap->ps_bc_buf); | |
| if (skb) { | |
| purged++; | |
| dev_kfree_skb(skb); | |
| } | |
| total += skb_queue_len(&ap->ps_bc_buf); | |
| } | |
| rcu_read_unlock(); | |
| read_lock_bh(&local->sta_lock); | |
| list_for_each_entry(sta, &local->sta_list, list) { | |
| skb = skb_dequeue(&sta->ps_tx_buf); | |
| if (skb) { | |
| purged++; | |
| dev_kfree_skb(skb); | |
| } | |
| total += skb_queue_len(&sta->ps_tx_buf); | |
| } | |
| read_unlock_bh(&local->sta_lock); | |
| local->total_ps_buffered = total; | |
| printk(KERN_DEBUG "%s: PS buffers full - purged %d frames\n", | |
| wiphy_name(local->hw.wiphy), purged); | |
| } | |
| static inline ieee80211_txrx_result | |
| ieee80211_tx_h_multicast_ps_buf(struct ieee80211_txrx_data *tx) | |
| { | |
| /* broadcast/multicast frame */ | |
| /* If any of the associated stations is in power save mode, | |
| * the frame is buffered to be sent after DTIM beacon frame */ | |
| if ((tx->local->hw.flags & IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING) && | |
| tx->sdata->type != IEEE80211_IF_TYPE_WDS && | |
| tx->sdata->bss && atomic_read(&tx->sdata->bss->num_sta_ps) && | |
| !(tx->fc & IEEE80211_FCTL_ORDER)) { | |
| if (tx->local->total_ps_buffered >= TOTAL_MAX_TX_BUFFER) | |
| purge_old_ps_buffers(tx->local); | |
| if (skb_queue_len(&tx->sdata->bss->ps_bc_buf) >= | |
| AP_MAX_BC_BUFFER) { | |
| if (net_ratelimit()) { | |
| printk(KERN_DEBUG "%s: BC TX buffer full - " | |
| "dropping the oldest frame\n", | |
| tx->dev->name); | |
| } | |
| dev_kfree_skb(skb_dequeue(&tx->sdata->bss->ps_bc_buf)); | |
| } else | |
| tx->local->total_ps_buffered++; | |
| skb_queue_tail(&tx->sdata->bss->ps_bc_buf, tx->skb); | |
| return TXRX_QUEUED; | |
| } | |
| return TXRX_CONTINUE; | |
| } | |
| static inline ieee80211_txrx_result | |
| ieee80211_tx_h_unicast_ps_buf(struct ieee80211_txrx_data *tx) | |
| { | |
| struct sta_info *sta = tx->sta; | |
| DECLARE_MAC_BUF(mac); | |
| if (unlikely(!sta || | |
| ((tx->fc & IEEE80211_FCTL_FTYPE) == IEEE80211_FTYPE_MGMT && | |
| (tx->fc & IEEE80211_FCTL_STYPE) == IEEE80211_STYPE_PROBE_RESP))) | |
| return TXRX_CONTINUE; | |
| if (unlikely((sta->flags & WLAN_STA_PS) && !sta->pspoll)) { | |
| struct ieee80211_tx_packet_data *pkt_data; | |
| #ifdef CONFIG_MAC80211_VERBOSE_PS_DEBUG | |
| printk(KERN_DEBUG "STA %s aid %d: PS buffer (entries " | |
| "before %d)\n", | |
| print_mac(mac, sta->addr), sta->aid, | |
| skb_queue_len(&sta->ps_tx_buf)); | |
| #endif /* CONFIG_MAC80211_VERBOSE_PS_DEBUG */ | |
| sta->flags |= WLAN_STA_TIM; | |
| if (tx->local->total_ps_buffered >= TOTAL_MAX_TX_BUFFER) | |
| purge_old_ps_buffers(tx->local); | |
| if (skb_queue_len(&sta->ps_tx_buf) >= STA_MAX_TX_BUFFER) { | |
| struct sk_buff *old = skb_dequeue(&sta->ps_tx_buf); | |
| if (net_ratelimit()) { | |
| printk(KERN_DEBUG "%s: STA %s TX " | |
| "buffer full - dropping oldest frame\n", | |
| tx->dev->name, print_mac(mac, sta->addr)); | |
| } | |
| dev_kfree_skb(old); | |
| } else | |
| tx->local->total_ps_buffered++; | |
| /* Queue frame to be sent after STA sends an PS Poll frame */ | |
| if (skb_queue_empty(&sta->ps_tx_buf)) { | |
| if (tx->local->ops->set_tim) | |
| tx->local->ops->set_tim(local_to_hw(tx->local), | |
| sta->aid, 1); | |
| if (tx->sdata->bss) | |
| bss_tim_set(tx->local, tx->sdata->bss, sta->aid); | |
| } | |
| pkt_data = (struct ieee80211_tx_packet_data *)tx->skb->cb; | |
| pkt_data->jiffies = jiffies; | |
| skb_queue_tail(&sta->ps_tx_buf, tx->skb); | |
| return TXRX_QUEUED; | |
| } | |
| #ifdef CONFIG_MAC80211_VERBOSE_PS_DEBUG | |
| else if (unlikely(sta->flags & WLAN_STA_PS)) { | |
| printk(KERN_DEBUG "%s: STA %s in PS mode, but pspoll " | |
| "set -> send frame\n", tx->dev->name, | |
| print_mac(mac, sta->addr)); | |
| } | |
| #endif /* CONFIG_MAC80211_VERBOSE_PS_DEBUG */ | |
| sta->pspoll = 0; | |
| return TXRX_CONTINUE; | |
| } | |
| static ieee80211_txrx_result | |
| ieee80211_tx_h_ps_buf(struct ieee80211_txrx_data *tx) | |
| { | |
| if (unlikely(tx->flags & IEEE80211_TXRXD_TXPS_BUFFERED)) | |
| return TXRX_CONTINUE; | |
| if (tx->flags & IEEE80211_TXRXD_TXUNICAST) | |
| return ieee80211_tx_h_unicast_ps_buf(tx); | |
| else | |
| return ieee80211_tx_h_multicast_ps_buf(tx); | |
| } | |
| static ieee80211_txrx_result | |
| ieee80211_tx_h_select_key(struct ieee80211_txrx_data *tx) | |
| { | |
| struct ieee80211_key *key; | |
| if (unlikely(tx->u.tx.control->flags & IEEE80211_TXCTL_DO_NOT_ENCRYPT)) | |
| tx->key = NULL; | |
| else if (tx->sta && (key = rcu_dereference(tx->sta->key))) | |
| tx->key = key; | |
| else if ((key = rcu_dereference(tx->sdata->default_key))) | |
| tx->key = key; | |
| else if (tx->sdata->drop_unencrypted && | |
| !(tx->sdata->eapol && ieee80211_is_eapol(tx->skb))) { | |
| I802_DEBUG_INC(tx->local->tx_handlers_drop_unencrypted); | |
| return TXRX_DROP; | |
| } else { | |
| tx->key = NULL; | |
| tx->u.tx.control->flags |= IEEE80211_TXCTL_DO_NOT_ENCRYPT; | |
| } | |
| if (tx->key) { | |
| tx->key->tx_rx_count++; | |
| /* TODO: add threshold stuff again */ | |
| } | |
| return TXRX_CONTINUE; | |
| } | |
| static ieee80211_txrx_result | |
| ieee80211_tx_h_fragment(struct ieee80211_txrx_data *tx) | |
| { | |
| struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) tx->skb->data; | |
| size_t hdrlen, per_fragm, num_fragm, payload_len, left; | |
| struct sk_buff **frags, *first, *frag; | |
| int i; | |
| u16 seq; | |
| u8 *pos; | |
| int frag_threshold = tx->local->fragmentation_threshold; | |
| if (!(tx->flags & IEEE80211_TXRXD_FRAGMENTED)) | |
| return TXRX_CONTINUE; | |
| first = tx->skb; | |
| hdrlen = ieee80211_get_hdrlen(tx->fc); | |
| payload_len = first->len - hdrlen; | |
| per_fragm = frag_threshold - hdrlen - FCS_LEN; | |
| num_fragm = DIV_ROUND_UP(payload_len, per_fragm); | |
| frags = kzalloc(num_fragm * sizeof(struct sk_buff *), GFP_ATOMIC); | |
| if (!frags) | |
| goto fail; | |
| hdr->frame_control |= cpu_to_le16(IEEE80211_FCTL_MOREFRAGS); | |
| seq = le16_to_cpu(hdr->seq_ctrl) & IEEE80211_SCTL_SEQ; | |
| pos = first->data + hdrlen + per_fragm; | |
| left = payload_len - per_fragm; | |
| for (i = 0; i < num_fragm - 1; i++) { | |
| struct ieee80211_hdr *fhdr; | |
| size_t copylen; | |
| if (left <= 0) | |
| goto fail; | |
| /* reserve enough extra head and tail room for possible | |
| * encryption */ | |
| frag = frags[i] = | |
| dev_alloc_skb(tx->local->tx_headroom + | |
| frag_threshold + | |
| IEEE80211_ENCRYPT_HEADROOM + | |
| IEEE80211_ENCRYPT_TAILROOM); | |
| if (!frag) | |
| goto fail; | |
| /* Make sure that all fragments use the same priority so | |
| * that they end up using the same TX queue */ | |
| frag->priority = first->priority; | |
| skb_reserve(frag, tx->local->tx_headroom + | |
| IEEE80211_ENCRYPT_HEADROOM); | |
| fhdr = (struct ieee80211_hdr *) skb_put(frag, hdrlen); | |
| memcpy(fhdr, first->data, hdrlen); | |
| if (i == num_fragm - 2) | |
| fhdr->frame_control &= cpu_to_le16(~IEEE80211_FCTL_MOREFRAGS); | |
| fhdr->seq_ctrl = cpu_to_le16(seq | ((i + 1) & IEEE80211_SCTL_FRAG)); | |
| copylen = left > per_fragm ? per_fragm : left; | |
| memcpy(skb_put(frag, copylen), pos, copylen); | |
| pos += copylen; | |
| left -= copylen; | |
| } | |
| skb_trim(first, hdrlen + per_fragm); | |
| tx->u.tx.num_extra_frag = num_fragm - 1; | |
| tx->u.tx.extra_frag = frags; | |
| return TXRX_CONTINUE; | |
| fail: | |
| printk(KERN_DEBUG "%s: failed to fragment frame\n", tx->dev->name); | |
| if (frags) { | |
| for (i = 0; i < num_fragm - 1; i++) | |
| if (frags[i]) | |
| dev_kfree_skb(frags[i]); | |
| kfree(frags); | |
| } | |
| I802_DEBUG_INC(tx->local->tx_handlers_drop_fragment); | |
| return TXRX_DROP; | |
| } | |
| static ieee80211_txrx_result | |
| ieee80211_tx_h_encrypt(struct ieee80211_txrx_data *tx) | |
| { | |
| if (!tx->key) | |
| return TXRX_CONTINUE; | |
| switch (tx->key->conf.alg) { | |
| case ALG_WEP: | |
| return ieee80211_crypto_wep_encrypt(tx); | |
| case ALG_TKIP: | |
| return ieee80211_crypto_tkip_encrypt(tx); | |
| case ALG_CCMP: | |
| return ieee80211_crypto_ccmp_encrypt(tx); | |
| } | |
| /* not reached */ | |
| WARN_ON(1); | |
| return TXRX_DROP; | |
| } | |
| static ieee80211_txrx_result | |
| ieee80211_tx_h_rate_ctrl(struct ieee80211_txrx_data *tx) | |
| { | |
| struct rate_control_extra extra; | |
| if (likely(!tx->u.tx.rate)) { | |
| memset(&extra, 0, sizeof(extra)); | |
| extra.mode = tx->u.tx.mode; | |
| extra.ethertype = tx->ethertype; | |
| tx->u.tx.rate = rate_control_get_rate(tx->local, tx->dev, | |
| tx->skb, &extra); | |
| if (unlikely(extra.probe != NULL)) { | |
| tx->u.tx.control->flags |= | |
| IEEE80211_TXCTL_RATE_CTRL_PROBE; | |
| tx->flags |= IEEE80211_TXRXD_TXPROBE_LAST_FRAG; | |
| tx->u.tx.control->alt_retry_rate = tx->u.tx.rate->val; | |
| tx->u.tx.rate = extra.probe; | |
| } else | |
| tx->u.tx.control->alt_retry_rate = -1; | |
| if (!tx->u.tx.rate) | |
| return TXRX_DROP; | |
| } else | |
| tx->u.tx.control->alt_retry_rate = -1; | |
| if (tx->u.tx.mode->mode == MODE_IEEE80211G && | |
| (tx->sdata->flags & IEEE80211_SDATA_USE_PROTECTION) && | |
| (tx->flags & IEEE80211_TXRXD_FRAGMENTED) && extra.nonerp) { | |
| tx->u.tx.last_frag_rate = tx->u.tx.rate; | |
| if (extra.probe) | |
| tx->flags &= ~IEEE80211_TXRXD_TXPROBE_LAST_FRAG; | |
| else | |
| tx->flags |= IEEE80211_TXRXD_TXPROBE_LAST_FRAG; | |
| tx->u.tx.rate = extra.nonerp; | |
| tx->u.tx.control->rate = extra.nonerp; | |
| tx->u.tx.control->flags &= ~IEEE80211_TXCTL_RATE_CTRL_PROBE; | |
| } else { | |
| tx->u.tx.last_frag_rate = tx->u.tx.rate; | |
| tx->u.tx.control->rate = tx->u.tx.rate; | |
| } | |
| tx->u.tx.control->tx_rate = tx->u.tx.rate->val; | |
| return TXRX_CONTINUE; | |
| } | |
| static ieee80211_txrx_result | |
| ieee80211_tx_h_misc(struct ieee80211_txrx_data *tx) | |
| { | |
| struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) tx->skb->data; | |
| u16 fc = le16_to_cpu(hdr->frame_control); | |
| u16 dur; | |
| struct ieee80211_tx_control *control = tx->u.tx.control; | |
| struct ieee80211_hw_mode *mode = tx->u.tx.mode; | |
| if (!control->retry_limit) { | |
| if (!is_multicast_ether_addr(hdr->addr1)) { | |
| if (tx->skb->len + FCS_LEN > tx->local->rts_threshold | |
| && tx->local->rts_threshold < | |
| IEEE80211_MAX_RTS_THRESHOLD) { | |
| control->flags |= | |
| IEEE80211_TXCTL_USE_RTS_CTS; | |
| control->flags |= | |
| IEEE80211_TXCTL_LONG_RETRY_LIMIT; | |
| control->retry_limit = | |
| tx->local->long_retry_limit; | |
| } else { | |
| control->retry_limit = | |
| tx->local->short_retry_limit; | |
| } | |
| } else { | |
| control->retry_limit = 1; | |
| } | |
| } | |
| if (tx->flags & IEEE80211_TXRXD_FRAGMENTED) { | |
| /* Do not use multiple retry rates when sending fragmented | |
| * frames. | |
| * TODO: The last fragment could still use multiple retry | |
| * rates. */ | |
| control->alt_retry_rate = -1; | |
| } | |
| /* Use CTS protection for unicast frames sent using extended rates if | |
| * there are associated non-ERP stations and RTS/CTS is not configured | |
| * for the frame. */ | |
| if (mode->mode == MODE_IEEE80211G && | |
| (tx->u.tx.rate->flags & IEEE80211_RATE_ERP) && | |
| (tx->flags & IEEE80211_TXRXD_TXUNICAST) && | |
| (tx->sdata->flags & IEEE80211_SDATA_USE_PROTECTION) && | |
| !(control->flags & IEEE80211_TXCTL_USE_RTS_CTS)) | |
| control->flags |= IEEE80211_TXCTL_USE_CTS_PROTECT; | |
| /* Transmit data frames using short preambles if the driver supports | |
| * short preambles at the selected rate and short preambles are | |
| * available on the network at the current point in time. */ | |
| if (((fc & IEEE80211_FCTL_FTYPE) == IEEE80211_FTYPE_DATA) && | |
| (tx->u.tx.rate->flags & IEEE80211_RATE_PREAMBLE2) && | |
| (tx->sdata->flags & IEEE80211_SDATA_SHORT_PREAMBLE) && | |
| (!tx->sta || (tx->sta->flags & WLAN_STA_SHORT_PREAMBLE))) { | |
| tx->u.tx.control->tx_rate = tx->u.tx.rate->val2; | |
| } | |
| /* Setup duration field for the first fragment of the frame. Duration | |
| * for remaining fragments will be updated when they are being sent | |
| * to low-level driver in ieee80211_tx(). */ | |
| dur = ieee80211_duration(tx, is_multicast_ether_addr(hdr->addr1), | |
| (tx->flags & IEEE80211_TXRXD_FRAGMENTED) ? | |
| tx->u.tx.extra_frag[0]->len : 0); | |
| hdr->duration_id = cpu_to_le16(dur); | |
| if ((control->flags & IEEE80211_TXCTL_USE_RTS_CTS) || | |
| (control->flags & IEEE80211_TXCTL_USE_CTS_PROTECT)) { | |
| struct ieee80211_rate *rate; | |
| /* Do not use multiple retry rates when using RTS/CTS */ | |
| control->alt_retry_rate = -1; | |
| /* Use min(data rate, max base rate) as CTS/RTS rate */ | |
| rate = tx->u.tx.rate; | |
| while (rate > mode->rates && | |
| !(rate->flags & IEEE80211_RATE_BASIC)) | |
| rate--; | |
| control->rts_cts_rate = rate->val; | |
| control->rts_rate = rate; | |
| } | |
| if (tx->sta) { | |
| tx->sta->tx_packets++; | |
| tx->sta->tx_fragments++; | |
| tx->sta->tx_bytes += tx->skb->len; | |
| if (tx->u.tx.extra_frag) { | |
| int i; | |
| tx->sta->tx_fragments += tx->u.tx.num_extra_frag; | |
| for (i = 0; i < tx->u.tx.num_extra_frag; i++) { | |
| tx->sta->tx_bytes += | |
| tx->u.tx.extra_frag[i]->len; | |
| } | |
| } | |
| } | |
| /* | |
| * Tell hardware to not encrypt when we had sw crypto. | |
| * Because we use the same flag to internally indicate that | |
| * no (software) encryption should be done, we have to set it | |
| * after all crypto handlers. | |
| */ | |
| if (tx->key && !(tx->key->flags & KEY_FLAG_UPLOADED_TO_HARDWARE)) | |
| tx->u.tx.control->flags |= IEEE80211_TXCTL_DO_NOT_ENCRYPT; | |
| return TXRX_CONTINUE; | |
| } | |
| static ieee80211_txrx_result | |
| ieee80211_tx_h_load_stats(struct ieee80211_txrx_data *tx) | |
| { | |
| struct ieee80211_local *local = tx->local; | |
| struct ieee80211_hw_mode *mode = tx->u.tx.mode; | |
| struct sk_buff *skb = tx->skb; | |
| struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data; | |
| u32 load = 0, hdrtime; | |
| /* TODO: this could be part of tx_status handling, so that the number | |
| * of retries would be known; TX rate should in that case be stored | |
| * somewhere with the packet */ | |
| /* Estimate total channel use caused by this frame */ | |
| /* 1 bit at 1 Mbit/s takes 1 usec; in channel_use values, | |
| * 1 usec = 1/8 * (1080 / 10) = 13.5 */ | |
| if (mode->mode == MODE_IEEE80211A || | |
| (mode->mode == MODE_IEEE80211G && | |
| tx->u.tx.rate->flags & IEEE80211_RATE_ERP)) | |
| hdrtime = CHAN_UTIL_HDR_SHORT; | |
| else | |
| hdrtime = CHAN_UTIL_HDR_LONG; | |
| load = hdrtime; | |
| if (!is_multicast_ether_addr(hdr->addr1)) | |
| load += hdrtime; | |
| if (tx->u.tx.control->flags & IEEE80211_TXCTL_USE_RTS_CTS) | |
| load += 2 * hdrtime; | |
| else if (tx->u.tx.control->flags & IEEE80211_TXCTL_USE_CTS_PROTECT) | |
| load += hdrtime; | |
| load += skb->len * tx->u.tx.rate->rate_inv; | |
| if (tx->u.tx.extra_frag) { | |
| int i; | |
| for (i = 0; i < tx->u.tx.num_extra_frag; i++) { | |
| load += 2 * hdrtime; | |
| load += tx->u.tx.extra_frag[i]->len * | |
| tx->u.tx.rate->rate; | |
| } | |
| } | |
| /* Divide channel_use by 8 to avoid wrapping around the counter */ | |
| load >>= CHAN_UTIL_SHIFT; | |
| local->channel_use_raw += load; | |
| if (tx->sta) | |
| tx->sta->channel_use_raw += load; | |
| tx->sdata->channel_use_raw += load; | |
| return TXRX_CONTINUE; | |
| } | |
| /* TODO: implement register/unregister functions for adding TX/RX handlers | |
| * into ordered list */ | |
| ieee80211_tx_handler ieee80211_tx_handlers[] = | |
| { | |
| ieee80211_tx_h_check_assoc, | |
| ieee80211_tx_h_sequence, | |
| ieee80211_tx_h_ps_buf, | |
| ieee80211_tx_h_select_key, | |
| ieee80211_tx_h_michael_mic_add, | |
| ieee80211_tx_h_fragment, | |
| ieee80211_tx_h_encrypt, | |
| ieee80211_tx_h_rate_ctrl, | |
| ieee80211_tx_h_misc, | |
| ieee80211_tx_h_load_stats, | |
| NULL | |
| }; | |
| /* actual transmit path */ | |
| /* | |
| * deal with packet injection down monitor interface | |
| * with Radiotap Header -- only called for monitor mode interface | |
| */ | |
| static ieee80211_txrx_result | |
| __ieee80211_parse_tx_radiotap(struct ieee80211_txrx_data *tx, | |
| struct sk_buff *skb) | |
| { | |
| /* | |
| * this is the moment to interpret and discard the radiotap header that | |
| * must be at the start of the packet injected in Monitor mode | |
| * | |
| * Need to take some care with endian-ness since radiotap | |
| * args are little-endian | |
| */ | |
| struct ieee80211_radiotap_iterator iterator; | |
| struct ieee80211_radiotap_header *rthdr = | |
| (struct ieee80211_radiotap_header *) skb->data; | |
| struct ieee80211_hw_mode *mode = tx->local->hw.conf.mode; | |
| int ret = ieee80211_radiotap_iterator_init(&iterator, rthdr, skb->len); | |
| struct ieee80211_tx_control *control = tx->u.tx.control; | |
| control->flags |= IEEE80211_TXCTL_DO_NOT_ENCRYPT; | |
| tx->flags |= IEEE80211_TXRXD_TX_INJECTED; | |
| tx->flags &= ~IEEE80211_TXRXD_FRAGMENTED; | |
| /* | |
| * for every radiotap entry that is present | |
| * (ieee80211_radiotap_iterator_next returns -ENOENT when no more | |
| * entries present, or -EINVAL on error) | |
| */ | |
| while (!ret) { | |
| int i, target_rate; | |
| ret = ieee80211_radiotap_iterator_next(&iterator); | |
| if (ret) | |
| continue; | |
| /* see if this argument is something we can use */ | |
| switch (iterator.this_arg_index) { | |
| /* | |
| * You must take care when dereferencing iterator.this_arg | |
| * for multibyte types... the pointer is not aligned. Use | |
| * get_unaligned((type *)iterator.this_arg) to dereference | |
| * iterator.this_arg for type "type" safely on all arches. | |
| */ | |
| case IEEE80211_RADIOTAP_RATE: | |
| /* | |
| * radiotap rate u8 is in 500kbps units eg, 0x02=1Mbps | |
| * ieee80211 rate int is in 100kbps units eg, 0x0a=1Mbps | |
| */ | |
| target_rate = (*iterator.this_arg) * 5; | |
| for (i = 0; i < mode->num_rates; i++) { | |
| struct ieee80211_rate *r = &mode->rates[i]; | |
| if (r->rate == target_rate) { | |
| tx->u.tx.rate = r; | |
| break; | |
| } | |
| } | |
| break; | |
| case IEEE80211_RADIOTAP_ANTENNA: | |
| /* | |
| * radiotap uses 0 for 1st ant, mac80211 is 1 for | |
| * 1st ant | |
| */ | |
| control->antenna_sel_tx = (*iterator.this_arg) + 1; | |
| break; | |
| case IEEE80211_RADIOTAP_DBM_TX_POWER: | |
| control->power_level = *iterator.this_arg; | |
| break; | |
| case IEEE80211_RADIOTAP_FLAGS: | |
| if (*iterator.this_arg & IEEE80211_RADIOTAP_F_FCS) { | |
| /* | |
| * this indicates that the skb we have been | |
| * handed has the 32-bit FCS CRC at the end... | |
| * we should react to that by snipping it off | |
| * because it will be recomputed and added | |
| * on transmission | |
| */ | |
| if (skb->len < (iterator.max_length + FCS_LEN)) | |
| return TXRX_DROP; | |
| skb_trim(skb, skb->len - FCS_LEN); | |
| } | |
| if (*iterator.this_arg & IEEE80211_RADIOTAP_F_WEP) | |
| control->flags &= | |
| ~IEEE80211_TXCTL_DO_NOT_ENCRYPT; | |
| if (*iterator.this_arg & IEEE80211_RADIOTAP_F_FRAG) | |
| tx->flags |= IEEE80211_TXRXD_FRAGMENTED; | |
| break; | |
| /* | |
| * Please update the file | |
| * Documentation/networking/mac80211-injection.txt | |
| * when parsing new fields here. | |
| */ | |
| default: | |
| break; | |
| } | |
| } | |
| if (ret != -ENOENT) /* ie, if we didn't simply run out of fields */ | |
| return TXRX_DROP; | |
| /* | |
| * remove the radiotap header | |
| * iterator->max_length was sanity-checked against | |
| * skb->len by iterator init | |
| */ | |
| skb_pull(skb, iterator.max_length); | |
| return TXRX_CONTINUE; | |
| } | |
| /* | |
| * initialises @tx | |
| */ | |
| static ieee80211_txrx_result | |
| __ieee80211_tx_prepare(struct ieee80211_txrx_data *tx, | |
| struct sk_buff *skb, | |
| struct net_device *dev, | |
| struct ieee80211_tx_control *control) | |
| { | |
| struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr); | |
| struct ieee80211_hdr *hdr; | |
| struct ieee80211_sub_if_data *sdata; | |
| ieee80211_txrx_result res = TXRX_CONTINUE; | |
| int hdrlen; | |
| memset(tx, 0, sizeof(*tx)); | |
| tx->skb = skb; | |
| tx->dev = dev; /* use original interface */ | |
| tx->local = local; | |
| tx->sdata = IEEE80211_DEV_TO_SUB_IF(dev); | |
| tx->u.tx.control = control; | |
| /* | |
| * Set this flag (used below to indicate "automatic fragmentation"), | |
| * it will be cleared/left by radiotap as desired. | |
| */ | |
| tx->flags |= IEEE80211_TXRXD_FRAGMENTED; | |
| /* process and remove the injection radiotap header */ | |
| sdata = IEEE80211_DEV_TO_SUB_IF(dev); | |
| if (unlikely(sdata->type == IEEE80211_IF_TYPE_MNTR)) { | |
| if (__ieee80211_parse_tx_radiotap(tx, skb) == TXRX_DROP) | |
| return TXRX_DROP; | |
| /* | |
| * __ieee80211_parse_tx_radiotap has now removed | |
| * the radiotap header that was present and pre-filled | |
| * 'tx' with tx control information. | |
| */ | |
| } | |
| hdr = (struct ieee80211_hdr *) skb->data; | |
| tx->sta = sta_info_get(local, hdr->addr1); | |
| tx->fc = le16_to_cpu(hdr->frame_control); | |
| if (is_multicast_ether_addr(hdr->addr1)) { | |
| tx->flags &= ~IEEE80211_TXRXD_TXUNICAST; | |
| control->flags |= IEEE80211_TXCTL_NO_ACK; | |
| } else { | |
| tx->flags |= IEEE80211_TXRXD_TXUNICAST; | |
| control->flags &= ~IEEE80211_TXCTL_NO_ACK; | |
| } | |
| if (tx->flags & IEEE80211_TXRXD_FRAGMENTED) { | |
| if ((tx->flags & IEEE80211_TXRXD_TXUNICAST) && | |
| skb->len + FCS_LEN > local->fragmentation_threshold && | |
| !local->ops->set_frag_threshold) | |
| tx->flags |= IEEE80211_TXRXD_FRAGMENTED; | |
| else | |
| tx->flags &= ~IEEE80211_TXRXD_FRAGMENTED; | |
| } | |
| if (!tx->sta) | |
| control->flags |= IEEE80211_TXCTL_CLEAR_DST_MASK; | |
| else if (tx->sta->clear_dst_mask) { | |
| control->flags |= IEEE80211_TXCTL_CLEAR_DST_MASK; | |
| tx->sta->clear_dst_mask = 0; | |
| } | |
| hdrlen = ieee80211_get_hdrlen(tx->fc); | |
| if (skb->len > hdrlen + sizeof(rfc1042_header) + 2) { | |
| u8 *pos = &skb->data[hdrlen + sizeof(rfc1042_header)]; | |
| tx->ethertype = (pos[0] << 8) | pos[1]; | |
| } | |
| control->flags |= IEEE80211_TXCTL_FIRST_FRAGMENT; | |
| return res; | |
| } | |
| /* Device in tx->dev has a reference added; use dev_put(tx->dev) when | |
| * finished with it. | |
| * | |
| * NB: @tx is uninitialised when passed in here | |
| */ | |
| static int ieee80211_tx_prepare(struct ieee80211_txrx_data *tx, | |
| struct sk_buff *skb, | |
| struct net_device *mdev, | |
| struct ieee80211_tx_control *control) | |
| { | |
| struct ieee80211_tx_packet_data *pkt_data; | |
| struct net_device *dev; | |
| pkt_data = (struct ieee80211_tx_packet_data *)skb->cb; | |
| dev = dev_get_by_index(&init_net, pkt_data->ifindex); | |
| if (unlikely(dev && !is_ieee80211_device(dev, mdev))) { | |
| dev_put(dev); | |
| dev = NULL; | |
| } | |
| if (unlikely(!dev)) | |
| return -ENODEV; | |
| /* initialises tx with control */ | |
| __ieee80211_tx_prepare(tx, skb, dev, control); | |
| return 0; | |
| } | |
| static int __ieee80211_tx(struct ieee80211_local *local, struct sk_buff *skb, | |
| struct ieee80211_txrx_data *tx) | |
| { | |
| struct ieee80211_tx_control *control = tx->u.tx.control; | |
| int ret, i; | |
| if (!ieee80211_qdisc_installed(local->mdev) && | |
| __ieee80211_queue_stopped(local, 0)) { | |
| netif_stop_queue(local->mdev); | |
| return IEEE80211_TX_AGAIN; | |
| } | |
| if (skb) { | |
| ieee80211_dump_frame(wiphy_name(local->hw.wiphy), | |
| "TX to low-level driver", skb); | |
| ret = local->ops->tx(local_to_hw(local), skb, control); | |
| if (ret) | |
| return IEEE80211_TX_AGAIN; | |
| local->mdev->trans_start = jiffies; | |
| ieee80211_led_tx(local, 1); | |
| } | |
| if (tx->u.tx.extra_frag) { | |
| control->flags &= ~(IEEE80211_TXCTL_USE_RTS_CTS | | |
| IEEE80211_TXCTL_USE_CTS_PROTECT | | |
| IEEE80211_TXCTL_CLEAR_DST_MASK | | |
| IEEE80211_TXCTL_FIRST_FRAGMENT); | |
| for (i = 0; i < tx->u.tx.num_extra_frag; i++) { | |
| if (!tx->u.tx.extra_frag[i]) | |
| continue; | |
| if (__ieee80211_queue_stopped(local, control->queue)) | |
| return IEEE80211_TX_FRAG_AGAIN; | |
| if (i == tx->u.tx.num_extra_frag) { | |
| control->tx_rate = tx->u.tx.last_frag_hwrate; | |
| control->rate = tx->u.tx.last_frag_rate; | |
| if (tx->flags & IEEE80211_TXRXD_TXPROBE_LAST_FRAG) | |
| control->flags |= | |
| IEEE80211_TXCTL_RATE_CTRL_PROBE; | |
| else | |
| control->flags &= | |
| ~IEEE80211_TXCTL_RATE_CTRL_PROBE; | |
| } | |
| ieee80211_dump_frame(wiphy_name(local->hw.wiphy), | |
| "TX to low-level driver", | |
| tx->u.tx.extra_frag[i]); | |
| ret = local->ops->tx(local_to_hw(local), | |
| tx->u.tx.extra_frag[i], | |
| control); | |
| if (ret) | |
| return IEEE80211_TX_FRAG_AGAIN; | |
| local->mdev->trans_start = jiffies; | |
| ieee80211_led_tx(local, 1); | |
| tx->u.tx.extra_frag[i] = NULL; | |
| } | |
| kfree(tx->u.tx.extra_frag); | |
| tx->u.tx.extra_frag = NULL; | |
| } | |
| return IEEE80211_TX_OK; | |
| } | |
| static int ieee80211_tx(struct net_device *dev, struct sk_buff *skb, | |
| struct ieee80211_tx_control *control) | |
| { | |
| struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr); | |
| struct sta_info *sta; | |
| ieee80211_tx_handler *handler; | |
| struct ieee80211_txrx_data tx; | |
| ieee80211_txrx_result res = TXRX_DROP, res_prepare; | |
| int ret, i; | |
| WARN_ON(__ieee80211_queue_pending(local, control->queue)); | |
| if (unlikely(skb->len < 10)) { | |
| dev_kfree_skb(skb); | |
| return 0; | |
| } | |
| /* initialises tx */ | |
| res_prepare = __ieee80211_tx_prepare(&tx, skb, dev, control); | |
| if (res_prepare == TXRX_DROP) { | |
| dev_kfree_skb(skb); | |
| return 0; | |
| } | |
| /* | |
| * key references are protected using RCU and this requires that | |
| * we are in a read-site RCU section during receive processing | |
| */ | |
| rcu_read_lock(); | |
| sta = tx.sta; | |
| tx.u.tx.mode = local->hw.conf.mode; | |
| for (handler = local->tx_handlers; *handler != NULL; | |
| handler++) { | |
| res = (*handler)(&tx); | |
| if (res != TXRX_CONTINUE) | |
| break; | |
| } | |
| skb = tx.skb; /* handlers are allowed to change skb */ | |
| if (sta) | |
| sta_info_put(sta); | |
| if (unlikely(res == TXRX_DROP)) { | |
| I802_DEBUG_INC(local->tx_handlers_drop); | |
| goto drop; | |
| } | |
| if (unlikely(res == TXRX_QUEUED)) { | |
| I802_DEBUG_INC(local->tx_handlers_queued); | |
| rcu_read_unlock(); | |
| return 0; | |
| } | |
| if (tx.u.tx.extra_frag) { | |
| for (i = 0; i < tx.u.tx.num_extra_frag; i++) { | |
| int next_len, dur; | |
| struct ieee80211_hdr *hdr = | |
| (struct ieee80211_hdr *) | |
| tx.u.tx.extra_frag[i]->data; | |
| if (i + 1 < tx.u.tx.num_extra_frag) { | |
| next_len = tx.u.tx.extra_frag[i + 1]->len; | |
| } else { | |
| next_len = 0; | |
| tx.u.tx.rate = tx.u.tx.last_frag_rate; | |
| tx.u.tx.last_frag_hwrate = tx.u.tx.rate->val; | |
| } | |
| dur = ieee80211_duration(&tx, 0, next_len); | |
| hdr->duration_id = cpu_to_le16(dur); | |
| } | |
| } | |
| retry: | |
| ret = __ieee80211_tx(local, skb, &tx); | |
| if (ret) { | |
| struct ieee80211_tx_stored_packet *store = | |
| &local->pending_packet[control->queue]; | |
| if (ret == IEEE80211_TX_FRAG_AGAIN) | |
| skb = NULL; | |
| set_bit(IEEE80211_LINK_STATE_PENDING, | |
| &local->state[control->queue]); | |
| smp_mb(); | |
| /* When the driver gets out of buffers during sending of | |
| * fragments and calls ieee80211_stop_queue, there is | |
| * a small window between IEEE80211_LINK_STATE_XOFF and | |
| * IEEE80211_LINK_STATE_PENDING flags are set. If a buffer | |
| * gets available in that window (i.e. driver calls | |
| * ieee80211_wake_queue), we would end up with ieee80211_tx | |
| * called with IEEE80211_LINK_STATE_PENDING. Prevent this by | |
| * continuing transmitting here when that situation is | |
| * possible to have happened. */ | |
| if (!__ieee80211_queue_stopped(local, control->queue)) { | |
| clear_bit(IEEE80211_LINK_STATE_PENDING, | |
| &local->state[control->queue]); | |
| goto retry; | |
| } | |
| memcpy(&store->control, control, | |
| sizeof(struct ieee80211_tx_control)); | |
| store->skb = skb; | |
| store->extra_frag = tx.u.tx.extra_frag; | |
| store->num_extra_frag = tx.u.tx.num_extra_frag; | |
| store->last_frag_hwrate = tx.u.tx.last_frag_hwrate; | |
| store->last_frag_rate = tx.u.tx.last_frag_rate; | |
| store->last_frag_rate_ctrl_probe = | |
| !!(tx.flags & IEEE80211_TXRXD_TXPROBE_LAST_FRAG); | |
| } | |
| rcu_read_unlock(); | |
| return 0; | |
| drop: | |
| if (skb) | |
| dev_kfree_skb(skb); | |
| for (i = 0; i < tx.u.tx.num_extra_frag; i++) | |
| if (tx.u.tx.extra_frag[i]) | |
| dev_kfree_skb(tx.u.tx.extra_frag[i]); | |
| kfree(tx.u.tx.extra_frag); | |
| rcu_read_unlock(); | |
| return 0; | |
| } | |
| /* device xmit handlers */ | |
| int ieee80211_master_start_xmit(struct sk_buff *skb, | |
| struct net_device *dev) | |
| { | |
| struct ieee80211_tx_control control; | |
| struct ieee80211_tx_packet_data *pkt_data; | |
| struct net_device *odev = NULL; | |
| struct ieee80211_sub_if_data *osdata; | |
| int headroom; | |
| int ret; | |
| /* | |
| * copy control out of the skb so other people can use skb->cb | |
| */ | |
| pkt_data = (struct ieee80211_tx_packet_data *)skb->cb; | |
| memset(&control, 0, sizeof(struct ieee80211_tx_control)); | |
| if (pkt_data->ifindex) | |
| odev = dev_get_by_index(&init_net, pkt_data->ifindex); | |
| if (unlikely(odev && !is_ieee80211_device(odev, dev))) { | |
| dev_put(odev); | |
| odev = NULL; | |
| } | |
| if (unlikely(!odev)) { | |
| #ifdef CONFIG_MAC80211_VERBOSE_DEBUG | |
| printk(KERN_DEBUG "%s: Discarded packet with nonexistent " | |
| "originating device\n", dev->name); | |
| #endif | |
| dev_kfree_skb(skb); | |
| return 0; | |
| } | |
| osdata = IEEE80211_DEV_TO_SUB_IF(odev); | |
| headroom = osdata->local->tx_headroom + IEEE80211_ENCRYPT_HEADROOM; | |
| if (skb_headroom(skb) < headroom) { | |
| if (pskb_expand_head(skb, headroom, 0, GFP_ATOMIC)) { | |
| dev_kfree_skb(skb); | |
| dev_put(odev); | |
| return 0; | |
| } | |
| } | |
| control.ifindex = odev->ifindex; | |
| control.type = osdata->type; | |
| if (pkt_data->flags & IEEE80211_TXPD_REQ_TX_STATUS) | |
| control.flags |= IEEE80211_TXCTL_REQ_TX_STATUS; | |
| if (pkt_data->flags & IEEE80211_TXPD_DO_NOT_ENCRYPT) | |
| control.flags |= IEEE80211_TXCTL_DO_NOT_ENCRYPT; | |
| if (pkt_data->flags & IEEE80211_TXPD_REQUEUE) | |
| control.flags |= IEEE80211_TXCTL_REQUEUE; | |
| control.queue = pkt_data->queue; | |
| ret = ieee80211_tx(odev, skb, &control); | |
| dev_put(odev); | |
| return ret; | |
| } | |
| int ieee80211_monitor_start_xmit(struct sk_buff *skb, | |
| struct net_device *dev) | |
| { | |
| struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr); | |
| struct ieee80211_tx_packet_data *pkt_data; | |
| struct ieee80211_radiotap_header *prthdr = | |
| (struct ieee80211_radiotap_header *)skb->data; | |
| u16 len_rthdr; | |
| /* check for not even having the fixed radiotap header part */ | |
| if (unlikely(skb->len < sizeof(struct ieee80211_radiotap_header))) | |
| goto fail; /* too short to be possibly valid */ | |
| /* is it a header version we can trust to find length from? */ | |
| if (unlikely(prthdr->it_version)) | |
| goto fail; /* only version 0 is supported */ | |
| /* then there must be a radiotap header with a length we can use */ | |
| len_rthdr = ieee80211_get_radiotap_len(skb->data); | |
| /* does the skb contain enough to deliver on the alleged length? */ | |
| if (unlikely(skb->len < len_rthdr)) | |
| goto fail; /* skb too short for claimed rt header extent */ | |
| skb->dev = local->mdev; | |
| pkt_data = (struct ieee80211_tx_packet_data *)skb->cb; | |
| memset(pkt_data, 0, sizeof(*pkt_data)); | |
| /* needed because we set skb device to master */ | |
| pkt_data->ifindex = dev->ifindex; | |
| pkt_data->flags |= IEEE80211_TXPD_DO_NOT_ENCRYPT; | |
| /* | |
| * fix up the pointers accounting for the radiotap | |
| * header still being in there. We are being given | |
| * a precooked IEEE80211 header so no need for | |
| * normal processing | |
| */ | |
| skb_set_mac_header(skb, len_rthdr); | |
| /* | |
| * these are just fixed to the end of the rt area since we | |
| * don't have any better information and at this point, nobody cares | |
| */ | |
| skb_set_network_header(skb, len_rthdr); | |
| skb_set_transport_header(skb, len_rthdr); | |
| /* pass the radiotap header up to the next stage intact */ | |
| dev_queue_xmit(skb); | |
| return NETDEV_TX_OK; | |
| fail: | |
| dev_kfree_skb(skb); | |
| return NETDEV_TX_OK; /* meaning, we dealt with the skb */ | |
| } | |
| /** | |
| * ieee80211_subif_start_xmit - netif start_xmit function for Ethernet-type | |
| * subinterfaces (wlan#, WDS, and VLAN interfaces) | |
| * @skb: packet to be sent | |
| * @dev: incoming interface | |
| * | |
| * Returns: 0 on success (and frees skb in this case) or 1 on failure (skb will | |
| * not be freed, and caller is responsible for either retrying later or freeing | |
| * skb). | |
| * | |
| * This function takes in an Ethernet header and encapsulates it with suitable | |
| * IEEE 802.11 header based on which interface the packet is coming in. The | |
| * encapsulated packet will then be passed to master interface, wlan#.11, for | |
| * transmission (through low-level driver). | |
| */ | |
| int ieee80211_subif_start_xmit(struct sk_buff *skb, | |
| struct net_device *dev) | |
| { | |
| struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr); | |
| struct ieee80211_tx_packet_data *pkt_data; | |
| struct ieee80211_sub_if_data *sdata; | |
| int ret = 1, head_need; | |
| u16 ethertype, hdrlen, fc; | |
| struct ieee80211_hdr hdr; | |
| const u8 *encaps_data; | |
| int encaps_len, skip_header_bytes; | |
| int nh_pos, h_pos; | |
| struct sta_info *sta; | |
| sdata = IEEE80211_DEV_TO_SUB_IF(dev); | |
| if (unlikely(skb->len < ETH_HLEN)) { | |
| printk(KERN_DEBUG "%s: short skb (len=%d)\n", | |
| dev->name, skb->len); | |
| ret = 0; | |
| goto fail; | |
| } | |
| nh_pos = skb_network_header(skb) - skb->data; | |
| h_pos = skb_transport_header(skb) - skb->data; | |
| /* convert Ethernet header to proper 802.11 header (based on | |
| * operation mode) */ | |
| ethertype = (skb->data[12] << 8) | skb->data[13]; | |
| /* TODO: handling for 802.1x authorized/unauthorized port */ | |
| fc = IEEE80211_FTYPE_DATA | IEEE80211_STYPE_DATA; | |
| switch (sdata->type) { | |
| case IEEE80211_IF_TYPE_AP: | |
| case IEEE80211_IF_TYPE_VLAN: | |
| fc |= IEEE80211_FCTL_FROMDS; | |
| /* DA BSSID SA */ | |
| memcpy(hdr.addr1, skb->data, ETH_ALEN); | |
| memcpy(hdr.addr2, dev->dev_addr, ETH_ALEN); | |
| memcpy(hdr.addr3, skb->data + ETH_ALEN, ETH_ALEN); | |
| hdrlen = 24; | |
| break; | |
| case IEEE80211_IF_TYPE_WDS: | |
| fc |= IEEE80211_FCTL_FROMDS | IEEE80211_FCTL_TODS; | |
| /* RA TA DA SA */ | |
| memcpy(hdr.addr1, sdata->u.wds.remote_addr, ETH_ALEN); | |
| memcpy(hdr.addr2, dev->dev_addr, ETH_ALEN); | |
| memcpy(hdr.addr3, skb->data, ETH_ALEN); | |
| memcpy(hdr.addr4, skb->data + ETH_ALEN, ETH_ALEN); | |
| hdrlen = 30; | |
| break; | |
| case IEEE80211_IF_TYPE_STA: | |
| fc |= IEEE80211_FCTL_TODS; | |
| /* BSSID SA DA */ | |
| memcpy(hdr.addr1, sdata->u.sta.bssid, ETH_ALEN); | |
| memcpy(hdr.addr2, skb->data + ETH_ALEN, ETH_ALEN); | |
| memcpy(hdr.addr3, skb->data, ETH_ALEN); | |
| hdrlen = 24; | |
| break; | |
| case IEEE80211_IF_TYPE_IBSS: | |
| /* DA SA BSSID */ | |
| memcpy(hdr.addr1, skb->data, ETH_ALEN); | |
| memcpy(hdr.addr2, skb->data + ETH_ALEN, ETH_ALEN); | |
| memcpy(hdr.addr3, sdata->u.sta.bssid, ETH_ALEN); | |
| hdrlen = 24; | |
| break; | |
| default: | |
| ret = 0; | |
| goto fail; | |
| } | |
| /* receiver is QoS enabled, use a QoS type frame */ | |
| sta = sta_info_get(local, hdr.addr1); | |
| if (sta) { | |
| if (sta->flags & WLAN_STA_WME) { | |
| fc |= IEEE80211_STYPE_QOS_DATA; | |
| hdrlen += 2; | |
| } | |
| sta_info_put(sta); | |
| } | |
| hdr.frame_control = cpu_to_le16(fc); | |
| hdr.duration_id = 0; | |
| hdr.seq_ctrl = 0; | |
| skip_header_bytes = ETH_HLEN; | |
| if (ethertype == ETH_P_AARP || ethertype == ETH_P_IPX) { | |
| encaps_data = bridge_tunnel_header; | |
| encaps_len = sizeof(bridge_tunnel_header); | |
| skip_header_bytes -= 2; | |
| } else if (ethertype >= 0x600) { | |
| encaps_data = rfc1042_header; | |
| encaps_len = sizeof(rfc1042_header); | |
| skip_header_bytes -= 2; | |
| } else { | |
| encaps_data = NULL; | |
| encaps_len = 0; | |
| } | |
| skb_pull(skb, skip_header_bytes); | |
| nh_pos -= skip_header_bytes; | |
| h_pos -= skip_header_bytes; | |
| /* TODO: implement support for fragments so that there is no need to | |
| * reallocate and copy payload; it might be enough to support one | |
| * extra fragment that would be copied in the beginning of the frame | |
| * data.. anyway, it would be nice to include this into skb structure | |
| * somehow | |
| * | |
| * There are few options for this: | |
| * use skb->cb as an extra space for 802.11 header | |
| * allocate new buffer if not enough headroom | |
| * make sure that there is enough headroom in every skb by increasing | |
| * build in headroom in __dev_alloc_skb() (linux/skbuff.h) and | |
| * alloc_skb() (net/core/skbuff.c) | |
| */ | |
| head_need = hdrlen + encaps_len + local->tx_headroom; | |
| head_need -= skb_headroom(skb); | |
| /* We are going to modify skb data, so make a copy of it if happens to | |
| * be cloned. This could happen, e.g., with Linux bridge code passing | |
| * us broadcast frames. */ | |
| if (head_need > 0 || skb_cloned(skb)) { | |
| #if 0 | |
| printk(KERN_DEBUG "%s: need to reallocate buffer for %d bytes " | |
| "of headroom\n", dev->name, head_need); | |
| #endif | |
| if (skb_cloned(skb)) | |
| I802_DEBUG_INC(local->tx_expand_skb_head_cloned); | |
| else | |
| I802_DEBUG_INC(local->tx_expand_skb_head); | |
| /* Since we have to reallocate the buffer, make sure that there | |
| * is enough room for possible WEP IV/ICV and TKIP (8 bytes | |
| * before payload and 12 after). */ | |
| if (pskb_expand_head(skb, (head_need > 0 ? head_need + 8 : 8), | |
| 12, GFP_ATOMIC)) { | |
| printk(KERN_DEBUG "%s: failed to reallocate TX buffer" | |
| "\n", dev->name); | |
| goto fail; | |
| } | |
| } | |
| if (encaps_data) { | |
| memcpy(skb_push(skb, encaps_len), encaps_data, encaps_len); | |
| nh_pos += encaps_len; | |
| h_pos += encaps_len; | |
| } | |
| if (fc & IEEE80211_STYPE_QOS_DATA) { | |
| __le16 *qos_control; | |
| qos_control = (__le16*) skb_push(skb, 2); | |
| memcpy(skb_push(skb, hdrlen - 2), &hdr, hdrlen - 2); | |
| /* | |
| * Maybe we could actually set some fields here, for now just | |
| * initialise to zero to indicate no special operation. | |
| */ | |
| *qos_control = 0; | |
| } else | |
| memcpy(skb_push(skb, hdrlen), &hdr, hdrlen); | |
| nh_pos += hdrlen; | |
| h_pos += hdrlen; | |
| pkt_data = (struct ieee80211_tx_packet_data *)skb->cb; | |
| memset(pkt_data, 0, sizeof(struct ieee80211_tx_packet_data)); | |
| pkt_data->ifindex = dev->ifindex; | |
| skb->dev = local->mdev; | |
| dev->stats.tx_packets++; | |
| dev->stats.tx_bytes += skb->len; | |
| /* Update skb pointers to various headers since this modified frame | |
| * is going to go through Linux networking code that may potentially | |
| * need things like pointer to IP header. */ | |
| skb_set_mac_header(skb, 0); | |
| skb_set_network_header(skb, nh_pos); | |
| skb_set_transport_header(skb, h_pos); | |
| dev->trans_start = jiffies; | |
| dev_queue_xmit(skb); | |
| return 0; | |
| fail: | |
| if (!ret) | |
| dev_kfree_skb(skb); | |
| return ret; | |
| } | |
| /* | |
| * This is the transmit routine for the 802.11 type interfaces | |
| * called by upper layers of the linux networking | |
| * stack when it has a frame to transmit | |
| */ | |
| int ieee80211_mgmt_start_xmit(struct sk_buff *skb, struct net_device *dev) | |
| { | |
| struct ieee80211_sub_if_data *sdata; | |
| struct ieee80211_tx_packet_data *pkt_data; | |
| struct ieee80211_hdr *hdr; | |
| u16 fc; | |
| sdata = IEEE80211_DEV_TO_SUB_IF(dev); | |
| if (skb->len < 10) { | |
| dev_kfree_skb(skb); | |
| return 0; | |
| } | |
| if (skb_headroom(skb) < sdata->local->tx_headroom) { | |
| if (pskb_expand_head(skb, sdata->local->tx_headroom, | |
| 0, GFP_ATOMIC)) { | |
| dev_kfree_skb(skb); | |
| return 0; | |
| } | |
| } | |
| hdr = (struct ieee80211_hdr *) skb->data; | |
| fc = le16_to_cpu(hdr->frame_control); | |
| pkt_data = (struct ieee80211_tx_packet_data *) skb->cb; | |
| memset(pkt_data, 0, sizeof(struct ieee80211_tx_packet_data)); | |
| pkt_data->ifindex = sdata->dev->ifindex; | |
| skb->priority = 20; /* use hardcoded priority for mgmt TX queue */ | |
| skb->dev = sdata->local->mdev; | |
| /* | |
| * We're using the protocol field of the the frame control header | |
| * to request TX callback for hostapd. BIT(1) is checked. | |
| */ | |
| if ((fc & BIT(1)) == BIT(1)) { | |
| pkt_data->flags |= IEEE80211_TXPD_REQ_TX_STATUS; | |
| fc &= ~BIT(1); | |
| hdr->frame_control = cpu_to_le16(fc); | |
| } | |
| if (!(fc & IEEE80211_FCTL_PROTECTED)) | |
| pkt_data->flags |= IEEE80211_TXPD_DO_NOT_ENCRYPT; | |
| dev->stats.tx_packets++; | |
| dev->stats.tx_bytes += skb->len; | |
| dev_queue_xmit(skb); | |
| return 0; | |
| } | |
| /* helper functions for pending packets for when queues are stopped */ | |
| void ieee80211_clear_tx_pending(struct ieee80211_local *local) | |
| { | |
| int i, j; | |
| struct ieee80211_tx_stored_packet *store; | |
| for (i = 0; i < local->hw.queues; i++) { | |
| if (!__ieee80211_queue_pending(local, i)) | |
| continue; | |
| store = &local->pending_packet[i]; | |
| kfree_skb(store->skb); | |
| for (j = 0; j < store->num_extra_frag; j++) | |
| kfree_skb(store->extra_frag[j]); | |
| kfree(store->extra_frag); | |
| clear_bit(IEEE80211_LINK_STATE_PENDING, &local->state[i]); | |
| } | |
| } | |
| void ieee80211_tx_pending(unsigned long data) | |
| { | |
| struct ieee80211_local *local = (struct ieee80211_local *)data; | |
| struct net_device *dev = local->mdev; | |
| struct ieee80211_tx_stored_packet *store; | |
| struct ieee80211_txrx_data tx; | |
| int i, ret, reschedule = 0; | |
| netif_tx_lock_bh(dev); | |
| for (i = 0; i < local->hw.queues; i++) { | |
| if (__ieee80211_queue_stopped(local, i)) | |
| continue; | |
| if (!__ieee80211_queue_pending(local, i)) { | |
| reschedule = 1; | |
| continue; | |
| } | |
| store = &local->pending_packet[i]; | |
| tx.u.tx.control = &store->control; | |
| tx.u.tx.extra_frag = store->extra_frag; | |
| tx.u.tx.num_extra_frag = store->num_extra_frag; | |
| tx.u.tx.last_frag_hwrate = store->last_frag_hwrate; | |
| tx.u.tx.last_frag_rate = store->last_frag_rate; | |
| tx.flags = 0; | |
| if (store->last_frag_rate_ctrl_probe) | |
| tx.flags |= IEEE80211_TXRXD_TXPROBE_LAST_FRAG; | |
| ret = __ieee80211_tx(local, store->skb, &tx); | |
| if (ret) { | |
| if (ret == IEEE80211_TX_FRAG_AGAIN) | |
| store->skb = NULL; | |
| } else { | |
| clear_bit(IEEE80211_LINK_STATE_PENDING, | |
| &local->state[i]); | |
| reschedule = 1; | |
| } | |
| } | |
| netif_tx_unlock_bh(dev); | |
| if (reschedule) { | |
| if (!ieee80211_qdisc_installed(dev)) { | |
| if (!__ieee80211_queue_stopped(local, 0)) | |
| netif_wake_queue(dev); | |
| } else | |
| netif_schedule(dev); | |
| } | |
| } | |
| /* functions for drivers to get certain frames */ | |
| static void ieee80211_beacon_add_tim(struct ieee80211_local *local, | |
| struct ieee80211_if_ap *bss, | |
| struct sk_buff *skb) | |
| { | |
| u8 *pos, *tim; | |
| int aid0 = 0; | |
| int i, have_bits = 0, n1, n2; | |
| /* Generate bitmap for TIM only if there are any STAs in power save | |
| * mode. */ | |
| read_lock_bh(&local->sta_lock); | |
| if (atomic_read(&bss->num_sta_ps) > 0) | |
| /* in the hope that this is faster than | |
| * checking byte-for-byte */ | |
| have_bits = !bitmap_empty((unsigned long*)bss->tim, | |
| IEEE80211_MAX_AID+1); | |
| if (bss->dtim_count == 0) | |
| bss->dtim_count = bss->dtim_period - 1; | |
| else | |
| bss->dtim_count--; | |
| tim = pos = (u8 *) skb_put(skb, 6); | |
| *pos++ = WLAN_EID_TIM; | |
| *pos++ = 4; | |
| *pos++ = bss->dtim_count; | |
| *pos++ = bss->dtim_period; | |
| if (bss->dtim_count == 0 && !skb_queue_empty(&bss->ps_bc_buf)) | |
| aid0 = 1; | |
| if (have_bits) { | |
| /* Find largest even number N1 so that bits numbered 1 through | |
| * (N1 x 8) - 1 in the bitmap are 0 and number N2 so that bits | |
| * (N2 + 1) x 8 through 2007 are 0. */ | |
| n1 = 0; | |
| for (i = 0; i < IEEE80211_MAX_TIM_LEN; i++) { | |
| if (bss->tim[i]) { | |
| n1 = i & 0xfe; | |
| break; | |
| } | |
| } | |
| n2 = n1; | |
| for (i = IEEE80211_MAX_TIM_LEN - 1; i >= n1; i--) { | |
| if (bss->tim[i]) { | |
| n2 = i; | |
| break; | |
| } | |
| } | |
| /* Bitmap control */ | |
| *pos++ = n1 | aid0; | |
| /* Part Virt Bitmap */ | |
| memcpy(pos, bss->tim + n1, n2 - n1 + 1); | |
| tim[1] = n2 - n1 + 4; | |
| skb_put(skb, n2 - n1); | |
| } else { | |
| *pos++ = aid0; /* Bitmap control */ | |
| *pos++ = 0; /* Part Virt Bitmap */ | |
| } | |
| read_unlock_bh(&local->sta_lock); | |
| } | |
| struct sk_buff *ieee80211_beacon_get(struct ieee80211_hw *hw, int if_id, | |
| struct ieee80211_tx_control *control) | |
| { | |
| struct ieee80211_local *local = hw_to_local(hw); | |
| struct sk_buff *skb; | |
| struct net_device *bdev; | |
| struct ieee80211_sub_if_data *sdata = NULL; | |
| struct ieee80211_if_ap *ap = NULL; | |
| struct ieee80211_rate *rate; | |
| struct rate_control_extra extra; | |
| u8 *b_head, *b_tail; | |
| int bh_len, bt_len; | |
| bdev = dev_get_by_index(&init_net, if_id); | |
| if (bdev) { | |
| sdata = IEEE80211_DEV_TO_SUB_IF(bdev); | |
| ap = &sdata->u.ap; | |
| dev_put(bdev); | |
| } | |
| if (!ap || sdata->type != IEEE80211_IF_TYPE_AP || | |
| !ap->beacon_head) { | |
| #ifdef CONFIG_MAC80211_VERBOSE_DEBUG | |
| if (net_ratelimit()) | |
| printk(KERN_DEBUG "no beacon data avail for idx=%d " | |
| "(%s)\n", if_id, bdev ? bdev->name : "N/A"); | |
| #endif /* CONFIG_MAC80211_VERBOSE_DEBUG */ | |
| return NULL; | |
| } | |
| /* Assume we are generating the normal beacon locally */ | |
| b_head = ap->beacon_head; | |
| b_tail = ap->beacon_tail; | |
| bh_len = ap->beacon_head_len; | |
| bt_len = ap->beacon_tail_len; | |
| skb = dev_alloc_skb(local->tx_headroom + | |
| bh_len + bt_len + 256 /* maximum TIM len */); | |
| if (!skb) | |
| return NULL; | |
| skb_reserve(skb, local->tx_headroom); | |
| memcpy(skb_put(skb, bh_len), b_head, bh_len); | |
| ieee80211_include_sequence(sdata, (struct ieee80211_hdr *)skb->data); | |
| ieee80211_beacon_add_tim(local, ap, skb); | |
| if (b_tail) { | |
| memcpy(skb_put(skb, bt_len), b_tail, bt_len); | |
| } | |
| if (control) { | |
| memset(&extra, 0, sizeof(extra)); | |
| extra.mode = local->oper_hw_mode; | |
| rate = rate_control_get_rate(local, local->mdev, skb, &extra); | |
| if (!rate) { | |
| if (net_ratelimit()) { | |
| printk(KERN_DEBUG "%s: ieee80211_beacon_get: no rate " | |
| "found\n", wiphy_name(local->hw.wiphy)); | |
| } | |
| dev_kfree_skb(skb); | |
| return NULL; | |
| } | |
| control->tx_rate = | |
| ((sdata->flags & IEEE80211_SDATA_SHORT_PREAMBLE) && | |
| (rate->flags & IEEE80211_RATE_PREAMBLE2)) ? | |
| rate->val2 : rate->val; | |
| control->antenna_sel_tx = local->hw.conf.antenna_sel_tx; | |
| control->power_level = local->hw.conf.power_level; | |
| control->flags |= IEEE80211_TXCTL_NO_ACK; | |
| control->retry_limit = 1; | |
| control->flags |= IEEE80211_TXCTL_CLEAR_DST_MASK; | |
| } | |
| ap->num_beacons++; | |
| return skb; | |
| } | |
| EXPORT_SYMBOL(ieee80211_beacon_get); | |
| void ieee80211_rts_get(struct ieee80211_hw *hw, int if_id, | |
| const void *frame, size_t frame_len, | |
| const struct ieee80211_tx_control *frame_txctl, | |
| struct ieee80211_rts *rts) | |
| { | |
| const struct ieee80211_hdr *hdr = frame; | |
| u16 fctl; | |
| fctl = IEEE80211_FTYPE_CTL | IEEE80211_STYPE_RTS; | |
| rts->frame_control = cpu_to_le16(fctl); | |
| rts->duration = ieee80211_rts_duration(hw, if_id, frame_len, frame_txctl); | |
| memcpy(rts->ra, hdr->addr1, sizeof(rts->ra)); | |
| memcpy(rts->ta, hdr->addr2, sizeof(rts->ta)); | |
| } | |
| EXPORT_SYMBOL(ieee80211_rts_get); | |
| void ieee80211_ctstoself_get(struct ieee80211_hw *hw, int if_id, | |
| const void *frame, size_t frame_len, | |
| const struct ieee80211_tx_control *frame_txctl, | |
| struct ieee80211_cts *cts) | |
| { | |
| const struct ieee80211_hdr *hdr = frame; | |
| u16 fctl; | |
| fctl = IEEE80211_FTYPE_CTL | IEEE80211_STYPE_CTS; | |
| cts->frame_control = cpu_to_le16(fctl); | |
| cts->duration = ieee80211_ctstoself_duration(hw, if_id, frame_len, frame_txctl); | |
| memcpy(cts->ra, hdr->addr1, sizeof(cts->ra)); | |
| } | |
| EXPORT_SYMBOL(ieee80211_ctstoself_get); | |
| struct sk_buff * | |
| ieee80211_get_buffered_bc(struct ieee80211_hw *hw, int if_id, | |
| struct ieee80211_tx_control *control) | |
| { | |
| struct ieee80211_local *local = hw_to_local(hw); | |
| struct sk_buff *skb; | |
| struct sta_info *sta; | |
| ieee80211_tx_handler *handler; | |
| struct ieee80211_txrx_data tx; | |
| ieee80211_txrx_result res = TXRX_DROP; | |
| struct net_device *bdev; | |
| struct ieee80211_sub_if_data *sdata; | |
| struct ieee80211_if_ap *bss = NULL; | |
| bdev = dev_get_by_index(&init_net, if_id); | |
| if (bdev) { | |
| sdata = IEEE80211_DEV_TO_SUB_IF(bdev); | |
| bss = &sdata->u.ap; | |
| dev_put(bdev); | |
| } | |
| if (!bss || sdata->type != IEEE80211_IF_TYPE_AP || !bss->beacon_head) | |
| return NULL; | |
| if (bss->dtim_count != 0) | |
| return NULL; /* send buffered bc/mc only after DTIM beacon */ | |
| memset(control, 0, sizeof(*control)); | |
| while (1) { | |
| skb = skb_dequeue(&bss->ps_bc_buf); | |
| if (!skb) | |
| return NULL; | |
| local->total_ps_buffered--; | |
| if (!skb_queue_empty(&bss->ps_bc_buf) && skb->len >= 2) { | |
| struct ieee80211_hdr *hdr = | |
| (struct ieee80211_hdr *) skb->data; | |
| /* more buffered multicast/broadcast frames ==> set | |
| * MoreData flag in IEEE 802.11 header to inform PS | |
| * STAs */ | |
| hdr->frame_control |= | |
| cpu_to_le16(IEEE80211_FCTL_MOREDATA); | |
| } | |
| if (!ieee80211_tx_prepare(&tx, skb, local->mdev, control)) | |
| break; | |
| dev_kfree_skb_any(skb); | |
| } | |
| sta = tx.sta; | |
| tx.flags |= IEEE80211_TXRXD_TXPS_BUFFERED; | |
| tx.u.tx.mode = local->hw.conf.mode; | |
| for (handler = local->tx_handlers; *handler != NULL; handler++) { | |
| res = (*handler)(&tx); | |
| if (res == TXRX_DROP || res == TXRX_QUEUED) | |
| break; | |
| } | |
| dev_put(tx.dev); | |
| skb = tx.skb; /* handlers are allowed to change skb */ | |
| if (res == TXRX_DROP) { | |
| I802_DEBUG_INC(local->tx_handlers_drop); | |
| dev_kfree_skb(skb); | |
| skb = NULL; | |
| } else if (res == TXRX_QUEUED) { | |
| I802_DEBUG_INC(local->tx_handlers_queued); | |
| skb = NULL; | |
| } | |
| if (sta) | |
| sta_info_put(sta); | |
| return skb; | |
| } | |
| EXPORT_SYMBOL(ieee80211_get_buffered_bc); |