| /* | 
 | * Device Tree Source for Netstal Maschinen HCU4 | 
 | * based on the IBM Walnut | 
 | * | 
 | * Copyright 2008 | 
 | * Niklaus Giger <niklaus.giger@member.fsf.org> | 
 | * | 
 | * Copyright 2007 IBM Corp. | 
 | * Josh Boyer <jwboyer@linux.vnet.ibm.com> | 
 | * | 
 | * This file is licensed under the terms of the GNU General Public | 
 | * License version 2.  This program is licensed "as is" without | 
 | * any warranty of any kind, whether express or implied. | 
 | */ | 
 |  | 
 | /dts-v1/; | 
 |  | 
 | / { | 
 | 	#address-cells = <0x1>; | 
 | 	#size-cells = <0x1>; | 
 | 	model = "netstal,hcu4"; | 
 | 	compatible = "netstal,hcu4"; | 
 | 	dcr-parent = <0x1>; | 
 |  | 
 | 	aliases { | 
 | 		ethernet0 = "/plb/opb/ethernet@ef600800"; | 
 | 		serial0 = "/plb/opb/serial@ef600300"; | 
 | 	}; | 
 |  | 
 | 	cpus { | 
 | 		#address-cells = <0x1>; | 
 | 		#size-cells = <0x0>; | 
 |  | 
 | 		cpu@0 { | 
 | 			device_type = "cpu"; | 
 | 			model = "PowerPC,405GPr"; | 
 | 			reg = <0x0>; | 
 | 			clock-frequency = <0>;		/* Filled in by U-Boot */ | 
 | 			timebase-frequency = <0x0>;	/* Filled in by U-Boot */ | 
 | 			i-cache-line-size = <0x20>; | 
 | 			d-cache-line-size = <0x20>; | 
 | 			i-cache-size = <0x4000>; | 
 | 			d-cache-size = <0x4000>; | 
 | 			dcr-controller; | 
 | 			dcr-access-method = "native"; | 
 | 			linux,phandle = <0x1>; | 
 | 		}; | 
 | 	}; | 
 |  | 
 | 	memory { | 
 | 		device_type = "memory"; | 
 | 		reg = <0x0 0x0>;	/* Filled in by U-Boot */ | 
 | 	}; | 
 |  | 
 | 	UIC0: interrupt-controller { | 
 | 		compatible = "ibm,uic"; | 
 | 		interrupt-controller; | 
 | 		cell-index = <0x0>; | 
 | 		dcr-reg = <0xc0 0x9>; | 
 | 		#address-cells = <0x0>; | 
 | 		#size-cells = <0x0>; | 
 | 		#interrupt-cells = <0x2>; | 
 | 		linux,phandle = <0x2>; | 
 | 	}; | 
 |  | 
 | 	plb { | 
 | 		compatible = "ibm,plb3"; | 
 | 		#address-cells = <0x1>; | 
 | 		#size-cells = <0x1>; | 
 | 		ranges; | 
 | 		clock-frequency = <0x0>;	/* Filled in by U-Boot */ | 
 |  | 
 | 		SDRAM0: memory-controller { | 
 | 			compatible = "ibm,sdram-405gp"; | 
 | 			dcr-reg = <0x10 0x2>; | 
 | 		}; | 
 |  | 
 | 		MAL: mcmal { | 
 | 			compatible = "ibm,mcmal-405gp", "ibm,mcmal"; | 
 | 			dcr-reg = <0x180 0x62>; | 
 | 			num-tx-chans = <0x1>; | 
 | 			num-rx-chans = <0x1>; | 
 | 			interrupt-parent = <0x2>; | 
 | 			interrupts = <0xb 0x4 0xc 0x4 0xa 0x4 0xd 0x4 0xe 0x4>; | 
 | 			linux,phandle = <0x3>; | 
 | 		}; | 
 |  | 
 | 		POB0: opb { | 
 | 			compatible = "ibm,opb-405gp", "ibm,opb"; | 
 | 			#address-cells = <0x1>; | 
 | 			#size-cells = <0x1>; | 
 | 			ranges = <0xef600000 0xef600000 0xa00000>; | 
 | 			dcr-reg = <0xa0 0x5>; | 
 | 			clock-frequency = <0x0>;	/* Filled in by U-Boot */ | 
 |  | 
 | 			UART0: serial@ef600300 { | 
 | 				device_type = "serial"; | 
 | 				compatible = "ns16550"; | 
 | 				reg = <0xef600300 0x8>; | 
 | 				virtual-reg = <0xef600300>; | 
 | 				clock-frequency = <0x0>;/* Filled in by U-Boot */ | 
 | 				current-speed = <0>;	/* Filled in by U-Boot */ | 
 | 				interrupt-parent = <0x2>; | 
 | 				interrupts = <0x0 0x4>; | 
 | 			}; | 
 |  | 
 | 			IIC: i2c@ef600500 { | 
 | 				compatible = "ibm,iic-405gp", "ibm,iic"; | 
 | 				reg = <0xef600500 0x11>; | 
 | 				interrupt-parent = <0x2>; | 
 | 				interrupts = <0x2 0x4>; | 
 | 			}; | 
 |  | 
 | 			GPIO: gpio@ef600700 { | 
 | 				compatible = "ibm,gpio-405gp"; | 
 | 				reg = <0xef600700 0x20>; | 
 | 			}; | 
 |  | 
 | 			EMAC: ethernet@ef600800 { | 
 | 				device_type = "network"; | 
 | 				compatible = "ibm,emac-405gp", "ibm,emac"; | 
 | 				interrupt-parent = <0x2>; | 
 | 				interrupts = <0xf 0x4 0x9 0x4>; | 
 | 				local-mac-address = [00 00 00 00 00 00]; | 
 | 				reg = <0xef600800 0x70>; | 
 | 				mal-device = <0x3>; | 
 | 				mal-tx-channel = <0x0>; | 
 | 				mal-rx-channel = <0x0>; | 
 | 				cell-index = <0x0>; | 
 | 				max-frame-size = <0x5dc>; | 
 | 				rx-fifo-size = <0x1000>; | 
 | 				tx-fifo-size = <0x800>; | 
 | 				phy-mode = "rmii"; | 
 | 				phy-map = <0x1>; | 
 | 			}; | 
 | 		}; | 
 |  | 
 | 		EBC0: ebc { | 
 | 			compatible = "ibm,ebc-405gp", "ibm,ebc"; | 
 | 			dcr-reg = <0x12 0x2>; | 
 | 			#address-cells = <0x2>; | 
 | 			#size-cells = <0x1>; | 
 | 			clock-frequency = <0x0>;	/* Filled in by U-Boot */ | 
 |  | 
 | 			sram@0,0 { | 
 | 				reg = <0x0 0x0 0x80000>; | 
 | 			}; | 
 |  | 
 | 			flash@0,80000 { | 
 | 				compatible = "jedec-flash"; | 
 | 				bank-width = <0x1>; | 
 | 				reg = <0x0 0x80000 0x80000>; | 
 | 				#address-cells = <0x1>; | 
 | 				#size-cells = <0x1>; | 
 |  | 
 | 				partition@0 { | 
 | 					label = "OpenBIOS"; | 
 | 					reg = <0x0 0x80000>; | 
 | 					read-only; | 
 | 				}; | 
 | 			}; | 
 | 		}; | 
 | 	}; | 
 |  | 
 | 	chosen { | 
 | 		linux,stdout-path = "/plb/opb/serial@ef600300"; | 
 | 	}; | 
 | }; |