| /* | 
 |  *	Watchdog driver for the SA11x0/PXA2xx | 
 |  * | 
 |  *	(c) Copyright 2000 Oleg Drokin <green@crimea.edu> | 
 |  *	    Based on SoftDog driver by Alan Cox <alan@lxorguk.ukuu.org.uk> | 
 |  * | 
 |  *	This program is free software; you can redistribute it and/or | 
 |  *	modify it under the terms of the GNU General Public License | 
 |  *	as published by the Free Software Foundation; either version | 
 |  *	2 of the License, or (at your option) any later version. | 
 |  * | 
 |  *	Neither Oleg Drokin nor iXcelerator.com admit liability nor provide | 
 |  *	warranty for any of this software. This material is provided | 
 |  *	"AS-IS" and at no charge. | 
 |  * | 
 |  *	(c) Copyright 2000           Oleg Drokin <green@crimea.edu> | 
 |  * | 
 |  *	27/11/2000 Initial release | 
 |  */ | 
 | #include <linux/module.h> | 
 | #include <linux/moduleparam.h> | 
 | #include <linux/types.h> | 
 | #include <linux/kernel.h> | 
 | #include <linux/fs.h> | 
 | #include <linux/miscdevice.h> | 
 | #include <linux/watchdog.h> | 
 | #include <linux/init.h> | 
 | #include <linux/bitops.h> | 
 | #include <linux/uaccess.h> | 
 | #include <linux/timex.h> | 
 |  | 
 | #ifdef CONFIG_ARCH_PXA | 
 | #include <mach/regs-ost.h> | 
 | #endif | 
 |  | 
 | #include <mach/reset.h> | 
 | #include <mach/hardware.h> | 
 |  | 
 | static unsigned long oscr_freq; | 
 | static unsigned long sa1100wdt_users; | 
 | static unsigned int pre_margin; | 
 | static int boot_status; | 
 |  | 
 | /* | 
 |  *	Allow only one person to hold it open | 
 |  */ | 
 | static int sa1100dog_open(struct inode *inode, struct file *file) | 
 | { | 
 | 	if (test_and_set_bit(1, &sa1100wdt_users)) | 
 | 		return -EBUSY; | 
 |  | 
 | 	/* Activate SA1100 Watchdog timer */ | 
 | 	OSMR3 = OSCR + pre_margin; | 
 | 	OSSR = OSSR_M3; | 
 | 	OWER = OWER_WME; | 
 | 	OIER |= OIER_E3; | 
 | 	return nonseekable_open(inode, file); | 
 | } | 
 |  | 
 | /* | 
 |  * The watchdog cannot be disabled. | 
 |  * | 
 |  * Previous comments suggested that turning off the interrupt by | 
 |  * clearing OIER[E3] would prevent the watchdog timing out but this | 
 |  * does not appear to be true (at least on the PXA255). | 
 |  */ | 
 | static int sa1100dog_release(struct inode *inode, struct file *file) | 
 | { | 
 | 	printk(KERN_CRIT "WATCHDOG: Device closed - timer will not stop\n"); | 
 | 	clear_bit(1, &sa1100wdt_users); | 
 | 	return 0; | 
 | } | 
 |  | 
 | static ssize_t sa1100dog_write(struct file *file, const char __user *data, | 
 | 						size_t len, loff_t *ppos) | 
 | { | 
 | 	if (len) | 
 | 		/* Refresh OSMR3 timer. */ | 
 | 		OSMR3 = OSCR + pre_margin; | 
 | 	return len; | 
 | } | 
 |  | 
 | static const struct watchdog_info ident = { | 
 | 	.options	= WDIOF_CARDRESET | WDIOF_SETTIMEOUT | 
 | 				| WDIOF_KEEPALIVEPING, | 
 | 	.identity	= "SA1100/PXA255 Watchdog", | 
 | 	.firmware_version	= 1, | 
 | }; | 
 |  | 
 | static long sa1100dog_ioctl(struct file *file, unsigned int cmd, | 
 | 							unsigned long arg) | 
 | { | 
 | 	int ret = -ENOTTY; | 
 | 	int time; | 
 | 	void __user *argp = (void __user *)arg; | 
 | 	int __user *p = argp; | 
 |  | 
 | 	switch (cmd) { | 
 | 	case WDIOC_GETSUPPORT: | 
 | 		ret = copy_to_user(argp, &ident, | 
 | 				   sizeof(ident)) ? -EFAULT : 0; | 
 | 		break; | 
 |  | 
 | 	case WDIOC_GETSTATUS: | 
 | 		ret = put_user(0, p); | 
 | 		break; | 
 |  | 
 | 	case WDIOC_GETBOOTSTATUS: | 
 | 		ret = put_user(boot_status, p); | 
 | 		break; | 
 |  | 
 | 	case WDIOC_KEEPALIVE: | 
 | 		OSMR3 = OSCR + pre_margin; | 
 | 		ret = 0; | 
 | 		break; | 
 |  | 
 | 	case WDIOC_SETTIMEOUT: | 
 | 		ret = get_user(time, p); | 
 | 		if (ret) | 
 | 			break; | 
 |  | 
 | 		if (time <= 0 || (oscr_freq * (long long)time >= 0xffffffff)) { | 
 | 			ret = -EINVAL; | 
 | 			break; | 
 | 		} | 
 |  | 
 | 		pre_margin = oscr_freq * time; | 
 | 		OSMR3 = OSCR + pre_margin; | 
 | 		/*fall through*/ | 
 |  | 
 | 	case WDIOC_GETTIMEOUT: | 
 | 		ret = put_user(pre_margin / oscr_freq, p); | 
 | 		break; | 
 | 	} | 
 | 	return ret; | 
 | } | 
 |  | 
 | static const struct file_operations sa1100dog_fops = { | 
 | 	.owner		= THIS_MODULE, | 
 | 	.llseek		= no_llseek, | 
 | 	.write		= sa1100dog_write, | 
 | 	.unlocked_ioctl	= sa1100dog_ioctl, | 
 | 	.open		= sa1100dog_open, | 
 | 	.release	= sa1100dog_release, | 
 | }; | 
 |  | 
 | static struct miscdevice sa1100dog_miscdev = { | 
 | 	.minor		= WATCHDOG_MINOR, | 
 | 	.name		= "watchdog", | 
 | 	.fops		= &sa1100dog_fops, | 
 | }; | 
 |  | 
 | static int margin __initdata = 60;		/* (secs) Default is 1 minute */ | 
 |  | 
 | static int __init sa1100dog_init(void) | 
 | { | 
 | 	int ret; | 
 |  | 
 | 	oscr_freq = get_clock_tick_rate(); | 
 |  | 
 | 	/* | 
 | 	 * Read the reset status, and save it for later.  If | 
 | 	 * we suspend, RCSR will be cleared, and the watchdog | 
 | 	 * reset reason will be lost. | 
 | 	 */ | 
 | 	boot_status = (reset_status & RESET_STATUS_WATCHDOG) ? | 
 | 				WDIOF_CARDRESET : 0; | 
 | 	pre_margin = oscr_freq * margin; | 
 |  | 
 | 	ret = misc_register(&sa1100dog_miscdev); | 
 | 	if (ret == 0) | 
 | 		printk(KERN_INFO | 
 | 			"SA1100/PXA2xx Watchdog Timer: timer margin %d sec\n", | 
 | 						margin); | 
 | 	return ret; | 
 | } | 
 |  | 
 | static void __exit sa1100dog_exit(void) | 
 | { | 
 | 	misc_deregister(&sa1100dog_miscdev); | 
 | } | 
 |  | 
 | module_init(sa1100dog_init); | 
 | module_exit(sa1100dog_exit); | 
 |  | 
 | MODULE_AUTHOR("Oleg Drokin <green@crimea.edu>"); | 
 | MODULE_DESCRIPTION("SA1100/PXA2xx Watchdog"); | 
 |  | 
 | module_param(margin, int, 0); | 
 | MODULE_PARM_DESC(margin, "Watchdog margin in seconds (default 60s)"); | 
 |  | 
 | MODULE_LICENSE("GPL"); | 
 | MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR); |