| /* | 
 |  * Copyright IBM Corporation, 2015 | 
 |  * Author Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> | 
 |  * | 
 |  * This program is free software; you can redistribute it and/or modify it | 
 |  * under the terms of version 2 of the GNU Lesser General Public License | 
 |  * as published by the Free Software Foundation. | 
 |  * | 
 |  * This program is distributed in the hope that it would be useful, but | 
 |  * WITHOUT ANY WARRANTY; without even the implied warranty of | 
 |  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. | 
 |  * | 
 |  */ | 
 |  | 
 | #include <linux/mm.h> | 
 | #include <asm/machdep.h> | 
 | #include <asm/mmu.h> | 
 |  | 
 | int __hash_page_4K(unsigned long ea, unsigned long access, unsigned long vsid, | 
 | 		   pte_t *ptep, unsigned long trap, unsigned long flags, | 
 | 		   int ssize, int subpg_prot) | 
 | { | 
 | 	real_pte_t rpte; | 
 | 	unsigned long hpte_group; | 
 | 	unsigned long rflags, pa; | 
 | 	unsigned long old_pte, new_pte; | 
 | 	unsigned long vpn, hash, slot; | 
 | 	unsigned long shift = mmu_psize_defs[MMU_PAGE_4K].shift; | 
 |  | 
 | 	/* | 
 | 	 * atomically mark the linux large page PTE busy and dirty | 
 | 	 */ | 
 | 	do { | 
 | 		pte_t pte = READ_ONCE(*ptep); | 
 |  | 
 | 		old_pte = pte_val(pte); | 
 | 		/* If PTE busy, retry the access */ | 
 | 		if (unlikely(old_pte & H_PAGE_BUSY)) | 
 | 			return 0; | 
 | 		/* If PTE permissions don't match, take page fault */ | 
 | 		if (unlikely(!check_pte_access(access, old_pte))) | 
 | 			return 1; | 
 | 		/* | 
 | 		 * Try to lock the PTE, add ACCESSED and DIRTY if it was | 
 | 		 * a write access. Since this is 4K insert of 64K page size | 
 | 		 * also add H_PAGE_COMBO | 
 | 		 */ | 
 | 		new_pte = old_pte | H_PAGE_BUSY | _PAGE_ACCESSED; | 
 | 		if (access & _PAGE_WRITE) | 
 | 			new_pte |= _PAGE_DIRTY; | 
 | 	} while (!pte_xchg(ptep, __pte(old_pte), __pte(new_pte))); | 
 |  | 
 | 	/* | 
 | 	 * PP bits. _PAGE_USER is already PP bit 0x2, so we only | 
 | 	 * need to add in 0x1 if it's a read-only user page | 
 | 	 */ | 
 | 	rflags = htab_convert_pte_flags(new_pte); | 
 | 	rpte = __real_pte(__pte(old_pte), ptep); | 
 |  | 
 | 	if (cpu_has_feature(CPU_FTR_NOEXECUTE) && | 
 | 	    !cpu_has_feature(CPU_FTR_COHERENT_ICACHE)) | 
 | 		rflags = hash_page_do_lazy_icache(rflags, __pte(old_pte), trap); | 
 |  | 
 | 	vpn  = hpt_vpn(ea, vsid, ssize); | 
 | 	if (unlikely(old_pte & H_PAGE_HASHPTE)) { | 
 | 		/* | 
 | 		 * There MIGHT be an HPTE for this pte | 
 | 		 */ | 
 | 		unsigned long gslot = pte_get_hash_gslot(vpn, shift, ssize, | 
 | 							 rpte, 0); | 
 |  | 
 | 		if (mmu_hash_ops.hpte_updatepp(gslot, rflags, vpn, MMU_PAGE_4K, | 
 | 					       MMU_PAGE_4K, ssize, flags) == -1) | 
 | 			old_pte &= ~_PAGE_HPTEFLAGS; | 
 | 	} | 
 |  | 
 | 	if (likely(!(old_pte & H_PAGE_HASHPTE))) { | 
 |  | 
 | 		pa = pte_pfn(__pte(old_pte)) << PAGE_SHIFT; | 
 | 		hash = hpt_hash(vpn, shift, ssize); | 
 |  | 
 | repeat: | 
 | 		hpte_group = ((hash & htab_hash_mask) * HPTES_PER_GROUP) & ~0x7UL; | 
 |  | 
 | 		/* Insert into the hash table, primary slot */ | 
 | 		slot = mmu_hash_ops.hpte_insert(hpte_group, vpn, pa, rflags, 0, | 
 | 						MMU_PAGE_4K, MMU_PAGE_4K, ssize); | 
 | 		/* | 
 | 		 * Primary is full, try the secondary | 
 | 		 */ | 
 | 		if (unlikely(slot == -1)) { | 
 | 			hpte_group = ((~hash & htab_hash_mask) * HPTES_PER_GROUP) & ~0x7UL; | 
 | 			slot = mmu_hash_ops.hpte_insert(hpte_group, vpn, pa, | 
 | 							rflags, | 
 | 							HPTE_V_SECONDARY, | 
 | 							MMU_PAGE_4K, | 
 | 							MMU_PAGE_4K, ssize); | 
 | 			if (slot == -1) { | 
 | 				if (mftb() & 0x1) | 
 | 					hpte_group = ((hash & htab_hash_mask) * | 
 | 						      HPTES_PER_GROUP) & ~0x7UL; | 
 | 				mmu_hash_ops.hpte_remove(hpte_group); | 
 | 				/* | 
 | 				 * FIXME!! Should be try the group from which we removed ? | 
 | 				 */ | 
 | 				goto repeat; | 
 | 			} | 
 | 		} | 
 | 		/* | 
 | 		 * Hypervisor failure. Restore old pte and return -1 | 
 | 		 * similar to __hash_page_* | 
 | 		 */ | 
 | 		if (unlikely(slot == -2)) { | 
 | 			*ptep = __pte(old_pte); | 
 | 			hash_failure_debug(ea, access, vsid, trap, ssize, | 
 | 					   MMU_PAGE_4K, MMU_PAGE_4K, old_pte); | 
 | 			return -1; | 
 | 		} | 
 | 		new_pte = (new_pte & ~_PAGE_HPTEFLAGS) | H_PAGE_HASHPTE; | 
 | 		new_pte |= pte_set_hidx(ptep, rpte, 0, slot); | 
 | 	} | 
 | 	*ptep = __pte(new_pte & ~H_PAGE_BUSY); | 
 | 	return 0; | 
 | } |