| /* | |
| * Copyright (C) 2000, 2001 Jeff Dike (jdike@karaya.com) | |
| * Licensed under the GPL | |
| */ | |
| #include "linux/kernel.h" | |
| #include "asm/errno.h" | |
| #include "linux/sched.h" | |
| #include "linux/mm.h" | |
| #include "linux/spinlock.h" | |
| #include "linux/config.h" | |
| #include "linux/init.h" | |
| #include "linux/ptrace.h" | |
| #include "asm/semaphore.h" | |
| #include "asm/pgtable.h" | |
| #include "asm/pgalloc.h" | |
| #include "asm/tlbflush.h" | |
| #include "asm/a.out.h" | |
| #include "asm/current.h" | |
| #include "asm/irq.h" | |
| #include "sysdep/sigcontext.h" | |
| #include "user_util.h" | |
| #include "kern_util.h" | |
| #include "kern.h" | |
| #include "chan_kern.h" | |
| #include "mconsole_kern.h" | |
| #include "mem.h" | |
| #include "mem_kern.h" | |
| #include "sysdep/sigcontext.h" | |
| #include "sysdep/ptrace.h" | |
| #include "os.h" | |
| #ifdef CONFIG_MODE_SKAS | |
| #include "skas.h" | |
| #endif | |
| #include "os.h" | |
| /* Note this is constrained to return 0, -EFAULT, -EACCESS, -ENOMEM by segv(). */ | |
| int handle_page_fault(unsigned long address, unsigned long ip, | |
| int is_write, int is_user, int *code_out) | |
| { | |
| struct mm_struct *mm = current->mm; | |
| struct vm_area_struct *vma; | |
| pgd_t *pgd; | |
| pud_t *pud; | |
| pmd_t *pmd; | |
| pte_t *pte; | |
| int err = -EFAULT; | |
| *code_out = SEGV_MAPERR; | |
| /* If the fault was during atomic operation, don't take the fault, just | |
| * fail. */ | |
| if (in_atomic()) | |
| goto out_nosemaphore; | |
| down_read(&mm->mmap_sem); | |
| vma = find_vma(mm, address); | |
| if(!vma) | |
| goto out; | |
| else if(vma->vm_start <= address) | |
| goto good_area; | |
| else if(!(vma->vm_flags & VM_GROWSDOWN)) | |
| goto out; | |
| else if(is_user && !ARCH_IS_STACKGROW(address)) | |
| goto out; | |
| else if(expand_stack(vma, address)) | |
| goto out; | |
| good_area: | |
| *code_out = SEGV_ACCERR; | |
| if(is_write && !(vma->vm_flags & VM_WRITE)) | |
| goto out; | |
| /* Don't require VM_READ|VM_EXEC for write faults! */ | |
| if(!is_write && !(vma->vm_flags & (VM_READ | VM_EXEC))) | |
| goto out; | |
| do { | |
| survive: | |
| switch (handle_mm_fault(mm, vma, address, is_write)){ | |
| case VM_FAULT_MINOR: | |
| current->min_flt++; | |
| break; | |
| case VM_FAULT_MAJOR: | |
| current->maj_flt++; | |
| break; | |
| case VM_FAULT_SIGBUS: | |
| err = -EACCES; | |
| goto out; | |
| case VM_FAULT_OOM: | |
| err = -ENOMEM; | |
| goto out_of_memory; | |
| default: | |
| BUG(); | |
| } | |
| pgd = pgd_offset(mm, address); | |
| pud = pud_offset(pgd, address); | |
| pmd = pmd_offset(pud, address); | |
| pte = pte_offset_kernel(pmd, address); | |
| } while(!pte_present(*pte)); | |
| err = 0; | |
| /* The below warning was added in place of | |
| * pte_mkyoung(); if (is_write) pte_mkdirty(); | |
| * If it's triggered, we'd see normally a hang here (a clean pte is | |
| * marked read-only to emulate the dirty bit). | |
| * However, the generic code can mark a PTE writable but clean on a | |
| * concurrent read fault, triggering this harmlessly. So comment it out. | |
| */ | |
| #if 0 | |
| WARN_ON(!pte_young(*pte) || (is_write && !pte_dirty(*pte))); | |
| #endif | |
| flush_tlb_page(vma, address); | |
| out: | |
| up_read(&mm->mmap_sem); | |
| out_nosemaphore: | |
| return(err); | |
| /* | |
| * We ran out of memory, or some other thing happened to us that made | |
| * us unable to handle the page fault gracefully. | |
| */ | |
| out_of_memory: | |
| if (current->pid == 1) { | |
| up_read(&mm->mmap_sem); | |
| yield(); | |
| down_read(&mm->mmap_sem); | |
| goto survive; | |
| } | |
| goto out; | |
| } | |
| void segv_handler(int sig, union uml_pt_regs *regs) | |
| { | |
| struct faultinfo * fi = UPT_FAULTINFO(regs); | |
| if(UPT_IS_USER(regs) && !SEGV_IS_FIXABLE(fi)){ | |
| bad_segv(*fi, UPT_IP(regs)); | |
| return; | |
| } | |
| segv(*fi, UPT_IP(regs), UPT_IS_USER(regs), regs); | |
| } | |
| struct kern_handlers handlinfo_kern = { | |
| .relay_signal = relay_signal, | |
| .winch = winch, | |
| .bus_handler = relay_signal, | |
| .page_fault = segv_handler, | |
| .sigio_handler = sigio_handler, | |
| .timer_handler = timer_handler | |
| }; | |
| /* | |
| * We give a *copy* of the faultinfo in the regs to segv. | |
| * This must be done, since nesting SEGVs could overwrite | |
| * the info in the regs. A pointer to the info then would | |
| * give us bad data! | |
| */ | |
| unsigned long segv(struct faultinfo fi, unsigned long ip, int is_user, void *sc) | |
| { | |
| struct siginfo si; | |
| void *catcher; | |
| int err; | |
| int is_write = FAULT_WRITE(fi); | |
| unsigned long address = FAULT_ADDRESS(fi); | |
| if(!is_user && (address >= start_vm) && (address < end_vm)){ | |
| flush_tlb_kernel_vm(); | |
| return(0); | |
| } | |
| else if(current->mm == NULL) | |
| panic("Segfault with no mm"); | |
| if (SEGV_IS_FIXABLE(&fi) || SEGV_MAYBE_FIXABLE(&fi)) | |
| err = handle_page_fault(address, ip, is_write, is_user, &si.si_code); | |
| else { | |
| err = -EFAULT; | |
| /* A thread accessed NULL, we get a fault, but CR2 is invalid. | |
| * This code is used in __do_copy_from_user() of TT mode. */ | |
| address = 0; | |
| } | |
| catcher = current->thread.fault_catcher; | |
| if(!err) | |
| return(0); | |
| else if(catcher != NULL){ | |
| current->thread.fault_addr = (void *) address; | |
| do_longjmp(catcher, 1); | |
| } | |
| else if(current->thread.fault_addr != NULL) | |
| panic("fault_addr set but no fault catcher"); | |
| else if(!is_user && arch_fixup(ip, sc)) | |
| return(0); | |
| if(!is_user) | |
| panic("Kernel mode fault at addr 0x%lx, ip 0x%lx", | |
| address, ip); | |
| if (err == -EACCES) { | |
| si.si_signo = SIGBUS; | |
| si.si_errno = 0; | |
| si.si_code = BUS_ADRERR; | |
| si.si_addr = (void *)address; | |
| current->thread.arch.faultinfo = fi; | |
| force_sig_info(SIGBUS, &si, current); | |
| } else if (err == -ENOMEM) { | |
| printk("VM: killing process %s\n", current->comm); | |
| do_exit(SIGKILL); | |
| } else { | |
| BUG_ON(err != -EFAULT); | |
| si.si_signo = SIGSEGV; | |
| si.si_addr = (void *) address; | |
| current->thread.arch.faultinfo = fi; | |
| force_sig_info(SIGSEGV, &si, current); | |
| } | |
| return(0); | |
| } | |
| void bad_segv(struct faultinfo fi, unsigned long ip) | |
| { | |
| struct siginfo si; | |
| si.si_signo = SIGSEGV; | |
| si.si_code = SEGV_ACCERR; | |
| si.si_addr = (void *) FAULT_ADDRESS(fi); | |
| current->thread.arch.faultinfo = fi; | |
| force_sig_info(SIGSEGV, &si, current); | |
| } | |
| void relay_signal(int sig, union uml_pt_regs *regs) | |
| { | |
| if(arch_handle_signal(sig, regs)) return; | |
| if(!UPT_IS_USER(regs)) | |
| panic("Kernel mode signal %d", sig); | |
| current->thread.arch.faultinfo = *UPT_FAULTINFO(regs); | |
| force_sig(sig, current); | |
| } | |
| void bus_handler(int sig, union uml_pt_regs *regs) | |
| { | |
| if(current->thread.fault_catcher != NULL) | |
| do_longjmp(current->thread.fault_catcher, 1); | |
| else relay_signal(sig, regs); | |
| } | |
| void winch(int sig, union uml_pt_regs *regs) | |
| { | |
| do_IRQ(WINCH_IRQ, regs); | |
| } | |
| void trap_init(void) | |
| { | |
| } |