| /* | |
| * | |
| * Procedures for interfacing to the RTAS on CHRP machines. | |
| * | |
| * Peter Bergner, IBM March 2001. | |
| * Copyright (C) 2001 IBM. | |
| * | |
| * This program is free software; you can redistribute it and/or | |
| * modify it under the terms of the GNU General Public License | |
| * as published by the Free Software Foundation; either version | |
| * 2 of the License, or (at your option) any later version. | |
| */ | |
| #include <stdarg.h> | |
| #include <linux/kernel.h> | |
| #include <linux/types.h> | |
| #include <linux/spinlock.h> | |
| #include <linux/module.h> | |
| #include <linux/init.h> | |
| #include <linux/capability.h> | |
| #include <linux/delay.h> | |
| #include <asm/prom.h> | |
| #include <asm/rtas.h> | |
| #include <asm/hvcall.h> | |
| #include <asm/semaphore.h> | |
| #include <asm/machdep.h> | |
| #include <asm/firmware.h> | |
| #include <asm/page.h> | |
| #include <asm/param.h> | |
| #include <asm/system.h> | |
| #include <asm/delay.h> | |
| #include <asm/uaccess.h> | |
| #include <asm/lmb.h> | |
| #include <asm/udbg.h> | |
| #include <asm/syscalls.h> | |
| struct rtas_t rtas = { | |
| .lock = SPIN_LOCK_UNLOCKED | |
| }; | |
| struct rtas_suspend_me_data { | |
| long waiting; | |
| struct rtas_args *args; | |
| }; | |
| EXPORT_SYMBOL(rtas); | |
| DEFINE_SPINLOCK(rtas_data_buf_lock); | |
| char rtas_data_buf[RTAS_DATA_BUF_SIZE] __cacheline_aligned; | |
| unsigned long rtas_rmo_buf; | |
| /* | |
| * If non-NULL, this gets called when the kernel terminates. | |
| * This is done like this so rtas_flash can be a module. | |
| */ | |
| void (*rtas_flash_term_hook)(int); | |
| EXPORT_SYMBOL(rtas_flash_term_hook); | |
| /* | |
| * call_rtas_display_status and call_rtas_display_status_delay | |
| * are designed only for very early low-level debugging, which | |
| * is why the token is hard-coded to 10. | |
| */ | |
| static void call_rtas_display_status(char c) | |
| { | |
| struct rtas_args *args = &rtas.args; | |
| unsigned long s; | |
| if (!rtas.base) | |
| return; | |
| spin_lock_irqsave(&rtas.lock, s); | |
| args->token = 10; | |
| args->nargs = 1; | |
| args->nret = 1; | |
| args->rets = (rtas_arg_t *)&(args->args[1]); | |
| args->args[0] = (unsigned char)c; | |
| enter_rtas(__pa(args)); | |
| spin_unlock_irqrestore(&rtas.lock, s); | |
| } | |
| static void call_rtas_display_status_delay(char c) | |
| { | |
| static int pending_newline = 0; /* did last write end with unprinted newline? */ | |
| static int width = 16; | |
| if (c == '\n') { | |
| while (width-- > 0) | |
| call_rtas_display_status(' '); | |
| width = 16; | |
| mdelay(500); | |
| pending_newline = 1; | |
| } else { | |
| if (pending_newline) { | |
| call_rtas_display_status('\r'); | |
| call_rtas_display_status('\n'); | |
| } | |
| pending_newline = 0; | |
| if (width--) { | |
| call_rtas_display_status(c); | |
| udelay(10000); | |
| } | |
| } | |
| } | |
| void __init udbg_init_rtas(void) | |
| { | |
| udbg_putc = call_rtas_display_status_delay; | |
| } | |
| void rtas_progress(char *s, unsigned short hex) | |
| { | |
| struct device_node *root; | |
| int width, *p; | |
| char *os; | |
| static int display_character, set_indicator; | |
| static int display_width, display_lines, *row_width, form_feed; | |
| static DEFINE_SPINLOCK(progress_lock); | |
| static int current_line; | |
| static int pending_newline = 0; /* did last write end with unprinted newline? */ | |
| if (!rtas.base) | |
| return; | |
| if (display_width == 0) { | |
| display_width = 0x10; | |
| if ((root = find_path_device("/rtas"))) { | |
| if ((p = (unsigned int *)get_property(root, | |
| "ibm,display-line-length", NULL))) | |
| display_width = *p; | |
| if ((p = (unsigned int *)get_property(root, | |
| "ibm,form-feed", NULL))) | |
| form_feed = *p; | |
| if ((p = (unsigned int *)get_property(root, | |
| "ibm,display-number-of-lines", NULL))) | |
| display_lines = *p; | |
| row_width = (unsigned int *)get_property(root, | |
| "ibm,display-truncation-length", NULL); | |
| } | |
| display_character = rtas_token("display-character"); | |
| set_indicator = rtas_token("set-indicator"); | |
| } | |
| if (display_character == RTAS_UNKNOWN_SERVICE) { | |
| /* use hex display if available */ | |
| if (set_indicator != RTAS_UNKNOWN_SERVICE) | |
| rtas_call(set_indicator, 3, 1, NULL, 6, 0, hex); | |
| return; | |
| } | |
| spin_lock(&progress_lock); | |
| /* | |
| * Last write ended with newline, but we didn't print it since | |
| * it would just clear the bottom line of output. Print it now | |
| * instead. | |
| * | |
| * If no newline is pending and form feed is supported, clear the | |
| * display with a form feed; otherwise, print a CR to start output | |
| * at the beginning of the line. | |
| */ | |
| if (pending_newline) { | |
| rtas_call(display_character, 1, 1, NULL, '\r'); | |
| rtas_call(display_character, 1, 1, NULL, '\n'); | |
| pending_newline = 0; | |
| } else { | |
| current_line = 0; | |
| if (form_feed) | |
| rtas_call(display_character, 1, 1, NULL, | |
| (char)form_feed); | |
| else | |
| rtas_call(display_character, 1, 1, NULL, '\r'); | |
| } | |
| if (row_width) | |
| width = row_width[current_line]; | |
| else | |
| width = display_width; | |
| os = s; | |
| while (*os) { | |
| if (*os == '\n' || *os == '\r') { | |
| /* If newline is the last character, save it | |
| * until next call to avoid bumping up the | |
| * display output. | |
| */ | |
| if (*os == '\n' && !os[1]) { | |
| pending_newline = 1; | |
| current_line++; | |
| if (current_line > display_lines-1) | |
| current_line = display_lines-1; | |
| spin_unlock(&progress_lock); | |
| return; | |
| } | |
| /* RTAS wants CR-LF, not just LF */ | |
| if (*os == '\n') { | |
| rtas_call(display_character, 1, 1, NULL, '\r'); | |
| rtas_call(display_character, 1, 1, NULL, '\n'); | |
| } else { | |
| /* CR might be used to re-draw a line, so we'll | |
| * leave it alone and not add LF. | |
| */ | |
| rtas_call(display_character, 1, 1, NULL, *os); | |
| } | |
| if (row_width) | |
| width = row_width[current_line]; | |
| else | |
| width = display_width; | |
| } else { | |
| width--; | |
| rtas_call(display_character, 1, 1, NULL, *os); | |
| } | |
| os++; | |
| /* if we overwrite the screen length */ | |
| if (width <= 0) | |
| while ((*os != 0) && (*os != '\n') && (*os != '\r')) | |
| os++; | |
| } | |
| spin_unlock(&progress_lock); | |
| } | |
| EXPORT_SYMBOL(rtas_progress); /* needed by rtas_flash module */ | |
| int rtas_token(const char *service) | |
| { | |
| int *tokp; | |
| if (rtas.dev == NULL) | |
| return RTAS_UNKNOWN_SERVICE; | |
| tokp = (int *) get_property(rtas.dev, service, NULL); | |
| return tokp ? *tokp : RTAS_UNKNOWN_SERVICE; | |
| } | |
| #ifdef CONFIG_RTAS_ERROR_LOGGING | |
| /* | |
| * Return the firmware-specified size of the error log buffer | |
| * for all rtas calls that require an error buffer argument. | |
| * This includes 'check-exception' and 'rtas-last-error'. | |
| */ | |
| int rtas_get_error_log_max(void) | |
| { | |
| static int rtas_error_log_max; | |
| if (rtas_error_log_max) | |
| return rtas_error_log_max; | |
| rtas_error_log_max = rtas_token ("rtas-error-log-max"); | |
| if ((rtas_error_log_max == RTAS_UNKNOWN_SERVICE) || | |
| (rtas_error_log_max > RTAS_ERROR_LOG_MAX)) { | |
| printk (KERN_WARNING "RTAS: bad log buffer size %d\n", | |
| rtas_error_log_max); | |
| rtas_error_log_max = RTAS_ERROR_LOG_MAX; | |
| } | |
| return rtas_error_log_max; | |
| } | |
| EXPORT_SYMBOL(rtas_get_error_log_max); | |
| char rtas_err_buf[RTAS_ERROR_LOG_MAX]; | |
| int rtas_last_error_token; | |
| /** Return a copy of the detailed error text associated with the | |
| * most recent failed call to rtas. Because the error text | |
| * might go stale if there are any other intervening rtas calls, | |
| * this routine must be called atomically with whatever produced | |
| * the error (i.e. with rtas.lock still held from the previous call). | |
| */ | |
| static char *__fetch_rtas_last_error(char *altbuf) | |
| { | |
| struct rtas_args err_args, save_args; | |
| u32 bufsz; | |
| char *buf = NULL; | |
| if (rtas_last_error_token == -1) | |
| return NULL; | |
| bufsz = rtas_get_error_log_max(); | |
| err_args.token = rtas_last_error_token; | |
| err_args.nargs = 2; | |
| err_args.nret = 1; | |
| err_args.args[0] = (rtas_arg_t)__pa(rtas_err_buf); | |
| err_args.args[1] = bufsz; | |
| err_args.args[2] = 0; | |
| save_args = rtas.args; | |
| rtas.args = err_args; | |
| enter_rtas(__pa(&rtas.args)); | |
| err_args = rtas.args; | |
| rtas.args = save_args; | |
| /* Log the error in the unlikely case that there was one. */ | |
| if (unlikely(err_args.args[2] == 0)) { | |
| if (altbuf) { | |
| buf = altbuf; | |
| } else { | |
| buf = rtas_err_buf; | |
| if (mem_init_done) | |
| buf = kmalloc(RTAS_ERROR_LOG_MAX, GFP_ATOMIC); | |
| } | |
| if (buf) | |
| memcpy(buf, rtas_err_buf, RTAS_ERROR_LOG_MAX); | |
| } | |
| return buf; | |
| } | |
| #define get_errorlog_buffer() kmalloc(RTAS_ERROR_LOG_MAX, GFP_KERNEL) | |
| #else /* CONFIG_RTAS_ERROR_LOGGING */ | |
| #define __fetch_rtas_last_error(x) NULL | |
| #define get_errorlog_buffer() NULL | |
| #endif | |
| int rtas_call(int token, int nargs, int nret, int *outputs, ...) | |
| { | |
| va_list list; | |
| int i; | |
| unsigned long s; | |
| struct rtas_args *rtas_args; | |
| char *buff_copy = NULL; | |
| int ret; | |
| if (token == RTAS_UNKNOWN_SERVICE) | |
| return -1; | |
| /* Gotta do something different here, use global lock for now... */ | |
| spin_lock_irqsave(&rtas.lock, s); | |
| rtas_args = &rtas.args; | |
| rtas_args->token = token; | |
| rtas_args->nargs = nargs; | |
| rtas_args->nret = nret; | |
| rtas_args->rets = (rtas_arg_t *)&(rtas_args->args[nargs]); | |
| va_start(list, outputs); | |
| for (i = 0; i < nargs; ++i) | |
| rtas_args->args[i] = va_arg(list, rtas_arg_t); | |
| va_end(list); | |
| for (i = 0; i < nret; ++i) | |
| rtas_args->rets[i] = 0; | |
| enter_rtas(__pa(rtas_args)); | |
| /* A -1 return code indicates that the last command couldn't | |
| be completed due to a hardware error. */ | |
| if (rtas_args->rets[0] == -1) | |
| buff_copy = __fetch_rtas_last_error(NULL); | |
| if (nret > 1 && outputs != NULL) | |
| for (i = 0; i < nret-1; ++i) | |
| outputs[i] = rtas_args->rets[i+1]; | |
| ret = (nret > 0)? rtas_args->rets[0]: 0; | |
| /* Gotta do something different here, use global lock for now... */ | |
| spin_unlock_irqrestore(&rtas.lock, s); | |
| if (buff_copy) { | |
| log_error(buff_copy, ERR_TYPE_RTAS_LOG, 0); | |
| if (mem_init_done) | |
| kfree(buff_copy); | |
| } | |
| return ret; | |
| } | |
| /* Given an RTAS status code of 990n compute the hinted delay of 10^n | |
| * (last digit) milliseconds. For now we bound at n=5 (100 sec). | |
| */ | |
| unsigned int rtas_extended_busy_delay_time(int status) | |
| { | |
| int order = status - 9900; | |
| unsigned long ms; | |
| if (order < 0) | |
| order = 0; /* RTC depends on this for -2 clock busy */ | |
| else if (order > 5) | |
| order = 5; /* bound */ | |
| /* Use microseconds for reasonable accuracy */ | |
| for (ms = 1; order > 0; order--) | |
| ms *= 10; | |
| return ms; | |
| } | |
| int rtas_error_rc(int rtas_rc) | |
| { | |
| int rc; | |
| switch (rtas_rc) { | |
| case -1: /* Hardware Error */ | |
| rc = -EIO; | |
| break; | |
| case -3: /* Bad indicator/domain/etc */ | |
| rc = -EINVAL; | |
| break; | |
| case -9000: /* Isolation error */ | |
| rc = -EFAULT; | |
| break; | |
| case -9001: /* Outstanding TCE/PTE */ | |
| rc = -EEXIST; | |
| break; | |
| case -9002: /* No usable slot */ | |
| rc = -ENODEV; | |
| break; | |
| default: | |
| printk(KERN_ERR "%s: unexpected RTAS error %d\n", | |
| __FUNCTION__, rtas_rc); | |
| rc = -ERANGE; | |
| break; | |
| } | |
| return rc; | |
| } | |
| int rtas_get_power_level(int powerdomain, int *level) | |
| { | |
| int token = rtas_token("get-power-level"); | |
| int rc; | |
| if (token == RTAS_UNKNOWN_SERVICE) | |
| return -ENOENT; | |
| while ((rc = rtas_call(token, 1, 2, level, powerdomain)) == RTAS_BUSY) | |
| udelay(1); | |
| if (rc < 0) | |
| return rtas_error_rc(rc); | |
| return rc; | |
| } | |
| int rtas_set_power_level(int powerdomain, int level, int *setlevel) | |
| { | |
| int token = rtas_token("set-power-level"); | |
| unsigned int wait_time; | |
| int rc; | |
| if (token == RTAS_UNKNOWN_SERVICE) | |
| return -ENOENT; | |
| while (1) { | |
| rc = rtas_call(token, 2, 2, setlevel, powerdomain, level); | |
| if (rc == RTAS_BUSY) | |
| udelay(1); | |
| else if (rtas_is_extended_busy(rc)) { | |
| wait_time = rtas_extended_busy_delay_time(rc); | |
| udelay(wait_time * 1000); | |
| } else | |
| break; | |
| } | |
| if (rc < 0) | |
| return rtas_error_rc(rc); | |
| return rc; | |
| } | |
| int rtas_get_sensor(int sensor, int index, int *state) | |
| { | |
| int token = rtas_token("get-sensor-state"); | |
| unsigned int wait_time; | |
| int rc; | |
| if (token == RTAS_UNKNOWN_SERVICE) | |
| return -ENOENT; | |
| while (1) { | |
| rc = rtas_call(token, 2, 2, state, sensor, index); | |
| if (rc == RTAS_BUSY) | |
| udelay(1); | |
| else if (rtas_is_extended_busy(rc)) { | |
| wait_time = rtas_extended_busy_delay_time(rc); | |
| udelay(wait_time * 1000); | |
| } else | |
| break; | |
| } | |
| if (rc < 0) | |
| return rtas_error_rc(rc); | |
| return rc; | |
| } | |
| int rtas_set_indicator(int indicator, int index, int new_value) | |
| { | |
| int token = rtas_token("set-indicator"); | |
| unsigned int wait_time; | |
| int rc; | |
| if (token == RTAS_UNKNOWN_SERVICE) | |
| return -ENOENT; | |
| while (1) { | |
| rc = rtas_call(token, 3, 1, NULL, indicator, index, new_value); | |
| if (rc == RTAS_BUSY) | |
| udelay(1); | |
| else if (rtas_is_extended_busy(rc)) { | |
| wait_time = rtas_extended_busy_delay_time(rc); | |
| udelay(wait_time * 1000); | |
| } | |
| else | |
| break; | |
| } | |
| if (rc < 0) | |
| return rtas_error_rc(rc); | |
| return rc; | |
| } | |
| void rtas_restart(char *cmd) | |
| { | |
| if (rtas_flash_term_hook) | |
| rtas_flash_term_hook(SYS_RESTART); | |
| printk("RTAS system-reboot returned %d\n", | |
| rtas_call(rtas_token("system-reboot"), 0, 1, NULL)); | |
| for (;;); | |
| } | |
| void rtas_power_off(void) | |
| { | |
| if (rtas_flash_term_hook) | |
| rtas_flash_term_hook(SYS_POWER_OFF); | |
| /* allow power on only with power button press */ | |
| printk("RTAS power-off returned %d\n", | |
| rtas_call(rtas_token("power-off"), 2, 1, NULL, -1, -1)); | |
| for (;;); | |
| } | |
| void rtas_halt(void) | |
| { | |
| if (rtas_flash_term_hook) | |
| rtas_flash_term_hook(SYS_HALT); | |
| /* allow power on only with power button press */ | |
| printk("RTAS power-off returned %d\n", | |
| rtas_call(rtas_token("power-off"), 2, 1, NULL, -1, -1)); | |
| for (;;); | |
| } | |
| /* Must be in the RMO region, so we place it here */ | |
| static char rtas_os_term_buf[2048]; | |
| void rtas_os_term(char *str) | |
| { | |
| int status; | |
| if (RTAS_UNKNOWN_SERVICE == rtas_token("ibm,os-term")) | |
| return; | |
| snprintf(rtas_os_term_buf, 2048, "OS panic: %s", str); | |
| do { | |
| status = rtas_call(rtas_token("ibm,os-term"), 1, 1, NULL, | |
| __pa(rtas_os_term_buf)); | |
| if (status == RTAS_BUSY) | |
| udelay(1); | |
| else if (status != 0) | |
| printk(KERN_EMERG "ibm,os-term call failed %d\n", | |
| status); | |
| } while (status == RTAS_BUSY); | |
| } | |
| static int ibm_suspend_me_token = RTAS_UNKNOWN_SERVICE; | |
| #ifdef CONFIG_PPC_PSERIES | |
| static void rtas_percpu_suspend_me(void *info) | |
| { | |
| int i; | |
| long rc; | |
| long flags; | |
| struct rtas_suspend_me_data *data = | |
| (struct rtas_suspend_me_data *)info; | |
| /* | |
| * We use "waiting" to indicate our state. As long | |
| * as it is >0, we are still trying to all join up. | |
| * If it goes to 0, we have successfully joined up and | |
| * one thread got H_Continue. If any error happens, | |
| * we set it to <0. | |
| */ | |
| local_irq_save(flags); | |
| do { | |
| rc = plpar_hcall_norets(H_JOIN); | |
| smp_rmb(); | |
| } while (rc == H_Success && data->waiting > 0); | |
| if (rc == H_Success) | |
| goto out; | |
| if (rc == H_Continue) { | |
| data->waiting = 0; | |
| data->args->args[data->args->nargs] = | |
| rtas_call(ibm_suspend_me_token, 0, 1, NULL); | |
| for_each_possible_cpu(i) | |
| plpar_hcall_norets(H_PROD,i); | |
| } else { | |
| data->waiting = -EBUSY; | |
| printk(KERN_ERR "Error on H_Join hypervisor call\n"); | |
| } | |
| out: | |
| local_irq_restore(flags); | |
| return; | |
| } | |
| static int rtas_ibm_suspend_me(struct rtas_args *args) | |
| { | |
| int i; | |
| struct rtas_suspend_me_data data; | |
| data.waiting = 1; | |
| data.args = args; | |
| /* Call function on all CPUs. One of us will make the | |
| * rtas call | |
| */ | |
| if (on_each_cpu(rtas_percpu_suspend_me, &data, 1, 0)) | |
| data.waiting = -EINVAL; | |
| if (data.waiting != 0) | |
| printk(KERN_ERR "Error doing global join\n"); | |
| /* Prod each CPU. This won't hurt, and will wake | |
| * anyone we successfully put to sleep with H_Join | |
| */ | |
| for_each_possible_cpu(i) | |
| plpar_hcall_norets(H_PROD, i); | |
| return data.waiting; | |
| } | |
| #else /* CONFIG_PPC_PSERIES */ | |
| static int rtas_ibm_suspend_me(struct rtas_args *args) | |
| { | |
| return -ENOSYS; | |
| } | |
| #endif | |
| asmlinkage int ppc_rtas(struct rtas_args __user *uargs) | |
| { | |
| struct rtas_args args; | |
| unsigned long flags; | |
| char *buff_copy, *errbuf = NULL; | |
| int nargs; | |
| int rc; | |
| if (!capable(CAP_SYS_ADMIN)) | |
| return -EPERM; | |
| if (copy_from_user(&args, uargs, 3 * sizeof(u32)) != 0) | |
| return -EFAULT; | |
| nargs = args.nargs; | |
| if (nargs > ARRAY_SIZE(args.args) | |
| || args.nret > ARRAY_SIZE(args.args) | |
| || nargs + args.nret > ARRAY_SIZE(args.args)) | |
| return -EINVAL; | |
| /* Copy in args. */ | |
| if (copy_from_user(args.args, uargs->args, | |
| nargs * sizeof(rtas_arg_t)) != 0) | |
| return -EFAULT; | |
| if (args.token == RTAS_UNKNOWN_SERVICE) | |
| return -EINVAL; | |
| /* Need to handle ibm,suspend_me call specially */ | |
| if (args.token == ibm_suspend_me_token) { | |
| rc = rtas_ibm_suspend_me(&args); | |
| if (rc) | |
| return rc; | |
| goto copy_return; | |
| } | |
| buff_copy = get_errorlog_buffer(); | |
| spin_lock_irqsave(&rtas.lock, flags); | |
| rtas.args = args; | |
| enter_rtas(__pa(&rtas.args)); | |
| args = rtas.args; | |
| args.rets = &args.args[nargs]; | |
| /* A -1 return code indicates that the last command couldn't | |
| be completed due to a hardware error. */ | |
| if (args.rets[0] == -1) | |
| errbuf = __fetch_rtas_last_error(buff_copy); | |
| spin_unlock_irqrestore(&rtas.lock, flags); | |
| if (buff_copy) { | |
| if (errbuf) | |
| log_error(errbuf, ERR_TYPE_RTAS_LOG, 0); | |
| kfree(buff_copy); | |
| } | |
| copy_return: | |
| /* Copy out args. */ | |
| if (copy_to_user(uargs->args + nargs, | |
| args.args + nargs, | |
| args.nret * sizeof(rtas_arg_t)) != 0) | |
| return -EFAULT; | |
| return 0; | |
| } | |
| /* This version can't take the spinlock, because it never returns */ | |
| struct rtas_args rtas_stop_self_args = { | |
| /* The token is initialized for real in setup_system() */ | |
| .token = RTAS_UNKNOWN_SERVICE, | |
| .nargs = 0, | |
| .nret = 1, | |
| .rets = &rtas_stop_self_args.args[0], | |
| }; | |
| void rtas_stop_self(void) | |
| { | |
| struct rtas_args *rtas_args = &rtas_stop_self_args; | |
| local_irq_disable(); | |
| BUG_ON(rtas_args->token == RTAS_UNKNOWN_SERVICE); | |
| printk("cpu %u (hwid %u) Ready to die...\n", | |
| smp_processor_id(), hard_smp_processor_id()); | |
| enter_rtas(__pa(rtas_args)); | |
| panic("Alas, I survived.\n"); | |
| } | |
| /* | |
| * Call early during boot, before mem init or bootmem, to retrieve the RTAS | |
| * informations from the device-tree and allocate the RMO buffer for userland | |
| * accesses. | |
| */ | |
| void __init rtas_initialize(void) | |
| { | |
| unsigned long rtas_region = RTAS_INSTANTIATE_MAX; | |
| /* Get RTAS dev node and fill up our "rtas" structure with infos | |
| * about it. | |
| */ | |
| rtas.dev = of_find_node_by_name(NULL, "rtas"); | |
| if (rtas.dev) { | |
| u32 *basep, *entryp; | |
| u32 *sizep; | |
| basep = (u32 *)get_property(rtas.dev, "linux,rtas-base", NULL); | |
| sizep = (u32 *)get_property(rtas.dev, "rtas-size", NULL); | |
| if (basep != NULL && sizep != NULL) { | |
| rtas.base = *basep; | |
| rtas.size = *sizep; | |
| entryp = (u32 *)get_property(rtas.dev, "linux,rtas-entry", NULL); | |
| if (entryp == NULL) /* Ugh */ | |
| rtas.entry = rtas.base; | |
| else | |
| rtas.entry = *entryp; | |
| } else | |
| rtas.dev = NULL; | |
| } | |
| if (!rtas.dev) | |
| return; | |
| /* If RTAS was found, allocate the RMO buffer for it and look for | |
| * the stop-self token if any | |
| */ | |
| #ifdef CONFIG_PPC64 | |
| if (machine_is(pseries) && firmware_has_feature(FW_FEATURE_LPAR)) { | |
| rtas_region = min(lmb.rmo_size, RTAS_INSTANTIATE_MAX); | |
| ibm_suspend_me_token = rtas_token("ibm,suspend-me"); | |
| } | |
| #endif | |
| rtas_rmo_buf = lmb_alloc_base(RTAS_RMOBUF_MAX, PAGE_SIZE, rtas_region); | |
| #ifdef CONFIG_HOTPLUG_CPU | |
| rtas_stop_self_args.token = rtas_token("stop-self"); | |
| #endif /* CONFIG_HOTPLUG_CPU */ | |
| #ifdef CONFIG_RTAS_ERROR_LOGGING | |
| rtas_last_error_token = rtas_token("rtas-last-error"); | |
| #endif | |
| } | |
| EXPORT_SYMBOL(rtas_token); | |
| EXPORT_SYMBOL(rtas_call); | |
| EXPORT_SYMBOL(rtas_data_buf); | |
| EXPORT_SYMBOL(rtas_data_buf_lock); | |
| EXPORT_SYMBOL(rtas_extended_busy_delay_time); | |
| EXPORT_SYMBOL(rtas_get_sensor); | |
| EXPORT_SYMBOL(rtas_get_power_level); | |
| EXPORT_SYMBOL(rtas_set_power_level); | |
| EXPORT_SYMBOL(rtas_set_indicator); |