| /* Kernel link layout for various "sections" | |
| * | |
| * Copyright (C) 1999-2003 Matthew Wilcox <willy at parisc-linux.org> | |
| * Copyright (C) 2000-2003 Paul Bame <bame at parisc-linux.org> | |
| * Copyright (C) 2000 John Marvin <jsm at parisc-linux.org> | |
| * Copyright (C) 2000 Michael Ang <mang with subcarrier.org> | |
| * Copyright (C) 2002 Randolph Chung <tausq with parisc-linux.org> | |
| * Copyright (C) 2003 James Bottomley <jejb with parisc-linux.org> | |
| * | |
| * | |
| * This program is free software; you can redistribute it and/or modify | |
| * it under the terms of the GNU General Public License as published by | |
| * the Free Software Foundation; either version 2 of the License, or | |
| * (at your option) any later version. | |
| * | |
| * This program is distributed in the hope that it will be useful, | |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
| * GNU General Public License for more details. | |
| * | |
| * You should have received a copy of the GNU General Public License | |
| * along with this program; if not, write to the Free Software | |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA | |
| */ | |
| #include <linux/config.h> | |
| #include <asm-generic/vmlinux.lds.h> | |
| /* needed for the processor specific cache alignment size */ | |
| #include <asm/cache.h> | |
| #include <asm/page.h> | |
| /* ld script to make hppa Linux kernel */ | |
| #ifndef CONFIG_64BIT | |
| OUTPUT_FORMAT("elf32-hppa-linux") | |
| OUTPUT_ARCH(hppa) | |
| #else | |
| OUTPUT_FORMAT("elf64-hppa-linux") | |
| OUTPUT_ARCH(hppa:hppa2.0w) | |
| #endif | |
| ENTRY(_stext) | |
| #ifndef CONFIG_64BIT | |
| jiffies = jiffies_64 + 4; | |
| #else | |
| jiffies = jiffies_64; | |
| #endif | |
| SECTIONS | |
| { | |
| . = KERNEL_BINARY_TEXT_START; | |
| _text = .; /* Text and read-only data */ | |
| .text ALIGN(16) : { | |
| *(.text) | |
| SCHED_TEXT | |
| LOCK_TEXT | |
| *(.text.do_softirq) | |
| *(.text.sys_exit) | |
| *(.text.do_sigaltstack) | |
| *(.text.do_fork) | |
| *(.text.*) | |
| *(.fixup) | |
| *(.lock.text) /* out-of-line lock text */ | |
| *(.gnu.warning) | |
| } = 0 | |
| _etext = .; /* End of text section */ | |
| RODATA | |
| /* writeable */ | |
| . = ALIGN(4096); /* Make sure this is page aligned so | |
| that we can properly leave these | |
| as writable */ | |
| data_start = .; | |
| . = ALIGN(16); /* Exception table */ | |
| __start___ex_table = .; | |
| __ex_table : { *(__ex_table) } | |
| __stop___ex_table = .; | |
| __start___unwind = .; /* unwind info */ | |
| .PARISC.unwind : { *(.PARISC.unwind) } | |
| __stop___unwind = .; | |
| .data : { /* Data */ | |
| *(.data) | |
| *(.data.vm0.pmd) | |
| *(.data.vm0.pgd) | |
| *(.data.vm0.pte) | |
| CONSTRUCTORS | |
| } | |
| . = ALIGN(4096); | |
| /* nosave data is really only used for software suspend...it's here | |
| * just in case we ever implement it */ | |
| __nosave_begin = .; | |
| .data_nosave : { *(.data.nosave) } | |
| . = ALIGN(4096); | |
| __nosave_end = .; | |
| . = ALIGN(L1_CACHE_BYTES); | |
| .data.cacheline_aligned : { *(.data.cacheline_aligned) } | |
| /* PA-RISC locks requires 16-byte alignment */ | |
| . = ALIGN(16); | |
| .data.lock_aligned : { *(.data.lock_aligned) } | |
| /* rarely changed data like cpu maps */ | |
| . = ALIGN(16); | |
| .data.read_mostly : { *(.data.read_mostly) } | |
| _edata = .; /* End of data section */ | |
| . = ALIGN(16384); /* init_task */ | |
| .data.init_task : { *(.data.init_task) } | |
| /* The interrupt stack is currently partially coded, but not yet | |
| * implemented */ | |
| . = ALIGN(16384); | |
| init_istack : { *(init_istack) } | |
| #ifdef CONFIG_64BIT | |
| . = ALIGN(16); /* Linkage tables */ | |
| .opd : { *(.opd) } PROVIDE (__gp = .); | |
| .plt : { *(.plt) } | |
| .dlt : { *(.dlt) } | |
| #endif | |
| . = ALIGN(16384); | |
| __init_begin = .; | |
| .init.text : { | |
| _sinittext = .; | |
| *(.init.text) | |
| _einittext = .; | |
| } | |
| .init.data : { *(.init.data) } | |
| . = ALIGN(16); | |
| __setup_start = .; | |
| .init.setup : { *(.init.setup) } | |
| __setup_end = .; | |
| __initcall_start = .; | |
| .initcall.init : { | |
| *(.initcall1.init) | |
| *(.initcall2.init) | |
| *(.initcall3.init) | |
| *(.initcall4.init) | |
| *(.initcall5.init) | |
| *(.initcall6.init) | |
| *(.initcall7.init) | |
| } | |
| __initcall_end = .; | |
| __con_initcall_start = .; | |
| .con_initcall.init : { *(.con_initcall.init) } | |
| __con_initcall_end = .; | |
| SECURITY_INIT | |
| /* alternate instruction replacement. This is a mechanism x86 uses | |
| * to detect the CPU type and replace generic instruction sequences | |
| * with CPU specific ones. We don't currently do this in PA, but | |
| * it seems like a good idea... */ | |
| . = ALIGN(4); | |
| __alt_instructions = .; | |
| .altinstructions : { *(.altinstructions) } | |
| __alt_instructions_end = .; | |
| .altinstr_replacement : { *(.altinstr_replacement) } | |
| /* .exit.text is discard at runtime, not link time, to deal with references | |
| from .altinstructions and .eh_frame */ | |
| .exit.text : { *(.exit.text) } | |
| .exit.data : { *(.exit.data) } | |
| . = ALIGN(4096); | |
| __initramfs_start = .; | |
| .init.ramfs : { *(.init.ramfs) } | |
| __initramfs_end = .; | |
| . = ALIGN(32); | |
| __per_cpu_start = .; | |
| .data.percpu : { *(.data.percpu) } | |
| __per_cpu_end = .; | |
| . = ALIGN(4096); | |
| __init_end = .; | |
| /* freed after init ends here */ | |
| __bss_start = .; /* BSS */ | |
| .bss : { *(.bss) *(COMMON) } | |
| __bss_stop = .; | |
| _end = . ; | |
| /* Sections to be discarded */ | |
| /DISCARD/ : { | |
| *(.exitcall.exit) | |
| #ifdef CONFIG_64BIT | |
| /* temporary hack until binutils is fixed to not emit these | |
| for static binaries */ | |
| *(.interp) | |
| *(.dynsym) | |
| *(.dynstr) | |
| *(.dynamic) | |
| *(.hash) | |
| #endif | |
| } | |
| STABS_DEBUG | |
| .note 0 : { *(.note) } | |
| } |