| /** | 
 |   * This file contains the major functions in WLAN | 
 |   * driver. It includes init, exit, open, close and main | 
 |   * thread etc.. | 
 |   */ | 
 |  | 
 | #include <linux/moduleparam.h> | 
 | #include <linux/delay.h> | 
 | #include <linux/etherdevice.h> | 
 | #include <linux/netdevice.h> | 
 | #include <linux/if_arp.h> | 
 | #include <linux/kthread.h> | 
 | #include <linux/kfifo.h> | 
 | #include <linux/stddef.h> | 
 | #include <linux/ieee80211.h> | 
 | #include <net/iw_handler.h> | 
 | #include <net/cfg80211.h> | 
 |  | 
 | #include "host.h" | 
 | #include "decl.h" | 
 | #include "dev.h" | 
 | #include "wext.h" | 
 | #include "cfg.h" | 
 | #include "debugfs.h" | 
 | #include "scan.h" | 
 | #include "assoc.h" | 
 | #include "cmd.h" | 
 |  | 
 | #define DRIVER_RELEASE_VERSION "323.p0" | 
 | const char lbs_driver_version[] = "COMM-USB8388-" DRIVER_RELEASE_VERSION | 
 | #ifdef  DEBUG | 
 |     "-dbg" | 
 | #endif | 
 |     ""; | 
 |  | 
 |  | 
 | /* Module parameters */ | 
 | unsigned int lbs_debug; | 
 | EXPORT_SYMBOL_GPL(lbs_debug); | 
 | module_param_named(libertas_debug, lbs_debug, int, 0644); | 
 |  | 
 |  | 
 | /* This global structure is used to send the confirm_sleep command as | 
 |  * fast as possible down to the firmware. */ | 
 | struct cmd_confirm_sleep confirm_sleep; | 
 |  | 
 |  | 
 | /** | 
 |  * the table to keep region code | 
 |  */ | 
 | u16 lbs_region_code_to_index[MRVDRV_MAX_REGION_CODE] = | 
 |     { 0x10, 0x20, 0x30, 0x31, 0x32, 0x40 }; | 
 |  | 
 | /** | 
 |  * FW rate table.  FW refers to rates by their index in this table, not by the | 
 |  * rate value itself.  Values of 0x00 are | 
 |  * reserved positions. | 
 |  */ | 
 | static u8 fw_data_rates[MAX_RATES] = | 
 |     { 0x02, 0x04, 0x0B, 0x16, 0x00, 0x0C, 0x12, | 
 |       0x18, 0x24, 0x30, 0x48, 0x60, 0x6C, 0x00 | 
 | }; | 
 |  | 
 | /** | 
 |  *  @brief use index to get the data rate | 
 |  * | 
 |  *  @param idx                The index of data rate | 
 |  *  @return 	   		data rate or 0 | 
 |  */ | 
 | u32 lbs_fw_index_to_data_rate(u8 idx) | 
 | { | 
 | 	if (idx >= sizeof(fw_data_rates)) | 
 | 		idx = 0; | 
 | 	return fw_data_rates[idx]; | 
 | } | 
 |  | 
 | /** | 
 |  *  @brief use rate to get the index | 
 |  * | 
 |  *  @param rate                 data rate | 
 |  *  @return 	   		index or 0 | 
 |  */ | 
 | u8 lbs_data_rate_to_fw_index(u32 rate) | 
 | { | 
 | 	u8 i; | 
 |  | 
 | 	if (!rate) | 
 | 		return 0; | 
 |  | 
 | 	for (i = 0; i < sizeof(fw_data_rates); i++) { | 
 | 		if (rate == fw_data_rates[i]) | 
 | 			return i; | 
 | 	} | 
 | 	return 0; | 
 | } | 
 |  | 
 |  | 
 | static int lbs_add_rtap(struct lbs_private *priv); | 
 | static void lbs_remove_rtap(struct lbs_private *priv); | 
 |  | 
 |  | 
 | /** | 
 |  * Get function for sysfs attribute rtap | 
 |  */ | 
 | static ssize_t lbs_rtap_get(struct device *dev, | 
 | 		struct device_attribute *attr, char * buf) | 
 | { | 
 | 	struct lbs_private *priv = to_net_dev(dev)->ml_priv; | 
 | 	return snprintf(buf, 5, "0x%X\n", priv->monitormode); | 
 | } | 
 |  | 
 | /** | 
 |  *  Set function for sysfs attribute rtap | 
 |  */ | 
 | static ssize_t lbs_rtap_set(struct device *dev, | 
 | 		struct device_attribute *attr, const char * buf, size_t count) | 
 | { | 
 | 	int monitor_mode; | 
 | 	struct lbs_private *priv = to_net_dev(dev)->ml_priv; | 
 |  | 
 | 	sscanf(buf, "%x", &monitor_mode); | 
 | 	if (monitor_mode) { | 
 | 		if (priv->monitormode == monitor_mode) | 
 | 			return strlen(buf); | 
 | 		if (!priv->monitormode) { | 
 | 			if (priv->infra_open || priv->mesh_open) | 
 | 				return -EBUSY; | 
 | 			if (priv->mode == IW_MODE_INFRA) | 
 | 				lbs_cmd_80211_deauthenticate(priv, | 
 | 							     priv->curbssparams.bssid, | 
 | 							     WLAN_REASON_DEAUTH_LEAVING); | 
 | 			else if (priv->mode == IW_MODE_ADHOC) | 
 | 				lbs_adhoc_stop(priv); | 
 | 			lbs_add_rtap(priv); | 
 | 		} | 
 | 		priv->monitormode = monitor_mode; | 
 | 	} else { | 
 | 		if (!priv->monitormode) | 
 | 			return strlen(buf); | 
 | 		priv->monitormode = 0; | 
 | 		lbs_remove_rtap(priv); | 
 |  | 
 | 		if (priv->currenttxskb) { | 
 | 			dev_kfree_skb_any(priv->currenttxskb); | 
 | 			priv->currenttxskb = NULL; | 
 | 		} | 
 |  | 
 | 		/* Wake queues, command thread, etc. */ | 
 | 		lbs_host_to_card_done(priv); | 
 | 	} | 
 |  | 
 | 	lbs_prepare_and_send_command(priv, | 
 | 			CMD_802_11_MONITOR_MODE, CMD_ACT_SET, | 
 | 			CMD_OPTION_WAITFORRSP, 0, &priv->monitormode); | 
 | 	return strlen(buf); | 
 | } | 
 |  | 
 | /** | 
 |  * lbs_rtap attribute to be exported per ethX interface | 
 |  * through sysfs (/sys/class/net/ethX/lbs_rtap) | 
 |  */ | 
 | static DEVICE_ATTR(lbs_rtap, 0644, lbs_rtap_get, lbs_rtap_set ); | 
 |  | 
 | /** | 
 |  *  @brief This function opens the ethX interface | 
 |  * | 
 |  *  @param dev     A pointer to net_device structure | 
 |  *  @return 	   0 or -EBUSY if monitor mode active | 
 |  */ | 
 | static int lbs_dev_open(struct net_device *dev) | 
 | { | 
 | 	struct lbs_private *priv = dev->ml_priv; | 
 | 	int ret = 0; | 
 |  | 
 | 	lbs_deb_enter(LBS_DEB_NET); | 
 |  | 
 | 	spin_lock_irq(&priv->driver_lock); | 
 |  | 
 | 	if (priv->monitormode) { | 
 | 		ret = -EBUSY; | 
 | 		goto out; | 
 | 	} | 
 |  | 
 | 	priv->infra_open = 1; | 
 |  | 
 | 	if (priv->connect_status == LBS_CONNECTED) | 
 | 		netif_carrier_on(dev); | 
 | 	else | 
 | 		netif_carrier_off(dev); | 
 |  | 
 | 	if (!priv->tx_pending_len) | 
 | 		netif_wake_queue(dev); | 
 |  out: | 
 |  | 
 | 	spin_unlock_irq(&priv->driver_lock); | 
 | 	lbs_deb_leave_args(LBS_DEB_NET, "ret %d", ret); | 
 | 	return ret; | 
 | } | 
 |  | 
 | /** | 
 |  *  @brief This function closes the ethX interface | 
 |  * | 
 |  *  @param dev     A pointer to net_device structure | 
 |  *  @return 	   0 | 
 |  */ | 
 | static int lbs_eth_stop(struct net_device *dev) | 
 | { | 
 | 	struct lbs_private *priv = dev->ml_priv; | 
 |  | 
 | 	lbs_deb_enter(LBS_DEB_NET); | 
 |  | 
 | 	spin_lock_irq(&priv->driver_lock); | 
 | 	priv->infra_open = 0; | 
 | 	netif_stop_queue(dev); | 
 | 	spin_unlock_irq(&priv->driver_lock); | 
 |  | 
 | 	schedule_work(&priv->mcast_work); | 
 |  | 
 | 	lbs_deb_leave(LBS_DEB_NET); | 
 | 	return 0; | 
 | } | 
 |  | 
 | static void lbs_tx_timeout(struct net_device *dev) | 
 | { | 
 | 	struct lbs_private *priv = dev->ml_priv; | 
 |  | 
 | 	lbs_deb_enter(LBS_DEB_TX); | 
 |  | 
 | 	lbs_pr_err("tx watch dog timeout\n"); | 
 |  | 
 | 	dev->trans_start = jiffies; | 
 |  | 
 | 	if (priv->currenttxskb) | 
 | 		lbs_send_tx_feedback(priv, 0); | 
 |  | 
 | 	/* XX: Shouldn't we also call into the hw-specific driver | 
 | 	   to kick it somehow? */ | 
 | 	lbs_host_to_card_done(priv); | 
 |  | 
 | 	/* More often than not, this actually happens because the | 
 | 	   firmware has crapped itself -- rather than just a very | 
 | 	   busy medium. So send a harmless command, and if/when | 
 | 	   _that_ times out, we'll kick it in the head. */ | 
 | 	lbs_prepare_and_send_command(priv, CMD_802_11_RSSI, 0, | 
 | 				     0, 0, NULL); | 
 |  | 
 | 	lbs_deb_leave(LBS_DEB_TX); | 
 | } | 
 |  | 
 | void lbs_host_to_card_done(struct lbs_private *priv) | 
 | { | 
 | 	unsigned long flags; | 
 |  | 
 | 	lbs_deb_enter(LBS_DEB_THREAD); | 
 |  | 
 | 	spin_lock_irqsave(&priv->driver_lock, flags); | 
 |  | 
 | 	priv->dnld_sent = DNLD_RES_RECEIVED; | 
 |  | 
 | 	/* Wake main thread if commands are pending */ | 
 | 	if (!priv->cur_cmd || priv->tx_pending_len > 0) { | 
 | 		if (!priv->wakeup_dev_required) | 
 | 			wake_up_interruptible(&priv->waitq); | 
 | 	} | 
 |  | 
 | 	spin_unlock_irqrestore(&priv->driver_lock, flags); | 
 | 	lbs_deb_leave(LBS_DEB_THREAD); | 
 | } | 
 | EXPORT_SYMBOL_GPL(lbs_host_to_card_done); | 
 |  | 
 | int lbs_set_mac_address(struct net_device *dev, void *addr) | 
 | { | 
 | 	int ret = 0; | 
 | 	struct lbs_private *priv = dev->ml_priv; | 
 | 	struct sockaddr *phwaddr = addr; | 
 | 	struct cmd_ds_802_11_mac_address cmd; | 
 |  | 
 | 	lbs_deb_enter(LBS_DEB_NET); | 
 |  | 
 | 	/* In case it was called from the mesh device */ | 
 | 	dev = priv->dev; | 
 |  | 
 | 	cmd.hdr.size = cpu_to_le16(sizeof(cmd)); | 
 | 	cmd.action = cpu_to_le16(CMD_ACT_SET); | 
 | 	memcpy(cmd.macadd, phwaddr->sa_data, ETH_ALEN); | 
 |  | 
 | 	ret = lbs_cmd_with_response(priv, CMD_802_11_MAC_ADDRESS, &cmd); | 
 | 	if (ret) { | 
 | 		lbs_deb_net("set MAC address failed\n"); | 
 | 		goto done; | 
 | 	} | 
 |  | 
 | 	memcpy(priv->current_addr, phwaddr->sa_data, ETH_ALEN); | 
 | 	memcpy(dev->dev_addr, phwaddr->sa_data, ETH_ALEN); | 
 | 	if (priv->mesh_dev) | 
 | 		memcpy(priv->mesh_dev->dev_addr, phwaddr->sa_data, ETH_ALEN); | 
 |  | 
 | done: | 
 | 	lbs_deb_leave_args(LBS_DEB_NET, "ret %d", ret); | 
 | 	return ret; | 
 | } | 
 |  | 
 |  | 
 | static inline int mac_in_list(unsigned char *list, int list_len, | 
 | 			      unsigned char *mac) | 
 | { | 
 | 	while (list_len) { | 
 | 		if (!memcmp(list, mac, ETH_ALEN)) | 
 | 			return 1; | 
 | 		list += ETH_ALEN; | 
 | 		list_len--; | 
 | 	} | 
 | 	return 0; | 
 | } | 
 |  | 
 |  | 
 | static int lbs_add_mcast_addrs(struct cmd_ds_mac_multicast_adr *cmd, | 
 | 			       struct net_device *dev, int nr_addrs) | 
 | { | 
 | 	int i = nr_addrs; | 
 | 	struct dev_mc_list *mc_list; | 
 |  | 
 | 	if ((dev->flags & (IFF_UP|IFF_MULTICAST)) != (IFF_UP|IFF_MULTICAST)) | 
 | 		return nr_addrs; | 
 |  | 
 | 	netif_addr_lock_bh(dev); | 
 | 	for (mc_list = dev->mc_list; mc_list; mc_list = mc_list->next) { | 
 | 		if (mac_in_list(cmd->maclist, nr_addrs, mc_list->dmi_addr)) { | 
 | 			lbs_deb_net("mcast address %s:%pM skipped\n", dev->name, | 
 | 				    mc_list->dmi_addr); | 
 | 			continue; | 
 | 		} | 
 |  | 
 | 		if (i == MRVDRV_MAX_MULTICAST_LIST_SIZE) | 
 | 			break; | 
 | 		memcpy(&cmd->maclist[6*i], mc_list->dmi_addr, ETH_ALEN); | 
 | 		lbs_deb_net("mcast address %s:%pM added to filter\n", dev->name, | 
 | 			    mc_list->dmi_addr); | 
 | 		i++; | 
 | 	} | 
 | 	netif_addr_unlock_bh(dev); | 
 | 	if (mc_list) | 
 | 		return -EOVERFLOW; | 
 |  | 
 | 	return i; | 
 | } | 
 |  | 
 | static void lbs_set_mcast_worker(struct work_struct *work) | 
 | { | 
 | 	struct lbs_private *priv = container_of(work, struct lbs_private, mcast_work); | 
 | 	struct cmd_ds_mac_multicast_adr mcast_cmd; | 
 | 	int dev_flags; | 
 | 	int nr_addrs; | 
 | 	int old_mac_control = priv->mac_control; | 
 |  | 
 | 	lbs_deb_enter(LBS_DEB_NET); | 
 |  | 
 | 	dev_flags = priv->dev->flags; | 
 | 	if (priv->mesh_dev) | 
 | 		dev_flags |= priv->mesh_dev->flags; | 
 |  | 
 | 	if (dev_flags & IFF_PROMISC) { | 
 | 		priv->mac_control |= CMD_ACT_MAC_PROMISCUOUS_ENABLE; | 
 | 		priv->mac_control &= ~(CMD_ACT_MAC_ALL_MULTICAST_ENABLE | | 
 | 				       CMD_ACT_MAC_MULTICAST_ENABLE); | 
 | 		goto out_set_mac_control; | 
 | 	} else if (dev_flags & IFF_ALLMULTI) { | 
 | 	do_allmulti: | 
 | 		priv->mac_control |= CMD_ACT_MAC_ALL_MULTICAST_ENABLE; | 
 | 		priv->mac_control &= ~(CMD_ACT_MAC_PROMISCUOUS_ENABLE | | 
 | 				       CMD_ACT_MAC_MULTICAST_ENABLE); | 
 | 		goto out_set_mac_control; | 
 | 	} | 
 |  | 
 | 	/* Once for priv->dev, again for priv->mesh_dev if it exists */ | 
 | 	nr_addrs = lbs_add_mcast_addrs(&mcast_cmd, priv->dev, 0); | 
 | 	if (nr_addrs >= 0 && priv->mesh_dev) | 
 | 		nr_addrs = lbs_add_mcast_addrs(&mcast_cmd, priv->mesh_dev, nr_addrs); | 
 | 	if (nr_addrs < 0) | 
 | 		goto do_allmulti; | 
 |  | 
 | 	if (nr_addrs) { | 
 | 		int size = offsetof(struct cmd_ds_mac_multicast_adr, | 
 | 				    maclist[6*nr_addrs]); | 
 |  | 
 | 		mcast_cmd.action = cpu_to_le16(CMD_ACT_SET); | 
 | 		mcast_cmd.hdr.size = cpu_to_le16(size); | 
 | 		mcast_cmd.nr_of_adrs = cpu_to_le16(nr_addrs); | 
 |  | 
 | 		lbs_cmd_async(priv, CMD_MAC_MULTICAST_ADR, &mcast_cmd.hdr, size); | 
 |  | 
 | 		priv->mac_control |= CMD_ACT_MAC_MULTICAST_ENABLE; | 
 | 	} else | 
 | 		priv->mac_control &= ~CMD_ACT_MAC_MULTICAST_ENABLE; | 
 |  | 
 | 	priv->mac_control &= ~(CMD_ACT_MAC_PROMISCUOUS_ENABLE | | 
 | 			       CMD_ACT_MAC_ALL_MULTICAST_ENABLE); | 
 |  out_set_mac_control: | 
 | 	if (priv->mac_control != old_mac_control) | 
 | 		lbs_set_mac_control(priv); | 
 |  | 
 | 	lbs_deb_leave(LBS_DEB_NET); | 
 | } | 
 |  | 
 | void lbs_set_multicast_list(struct net_device *dev) | 
 | { | 
 | 	struct lbs_private *priv = dev->ml_priv; | 
 |  | 
 | 	schedule_work(&priv->mcast_work); | 
 | } | 
 |  | 
 | /** | 
 |  *  @brief This function handles the major jobs in the LBS driver. | 
 |  *  It handles all events generated by firmware, RX data received | 
 |  *  from firmware and TX data sent from kernel. | 
 |  * | 
 |  *  @param data    A pointer to lbs_thread structure | 
 |  *  @return 	   0 | 
 |  */ | 
 | static int lbs_thread(void *data) | 
 | { | 
 | 	struct net_device *dev = data; | 
 | 	struct lbs_private *priv = dev->ml_priv; | 
 | 	wait_queue_t wait; | 
 |  | 
 | 	lbs_deb_enter(LBS_DEB_THREAD); | 
 |  | 
 | 	init_waitqueue_entry(&wait, current); | 
 |  | 
 | 	for (;;) { | 
 | 		int shouldsleep; | 
 | 		u8 resp_idx; | 
 |  | 
 | 		lbs_deb_thread("1: currenttxskb %p, dnld_sent %d\n", | 
 | 				priv->currenttxskb, priv->dnld_sent); | 
 |  | 
 | 		add_wait_queue(&priv->waitq, &wait); | 
 | 		set_current_state(TASK_INTERRUPTIBLE); | 
 | 		spin_lock_irq(&priv->driver_lock); | 
 |  | 
 | 		if (kthread_should_stop()) | 
 | 			shouldsleep = 0;	/* Bye */ | 
 | 		else if (priv->surpriseremoved) | 
 | 			shouldsleep = 1;	/* We need to wait until we're _told_ to die */ | 
 | 		else if (priv->psstate == PS_STATE_SLEEP) | 
 | 			shouldsleep = 1;	/* Sleep mode. Nothing we can do till it wakes */ | 
 | 		else if (priv->cmd_timed_out) | 
 | 			shouldsleep = 0;	/* Command timed out. Recover */ | 
 | 		else if (!priv->fw_ready) | 
 | 			shouldsleep = 1;	/* Firmware not ready. We're waiting for it */ | 
 | 		else if (priv->dnld_sent) | 
 | 			shouldsleep = 1;	/* Something is en route to the device already */ | 
 | 		else if (priv->tx_pending_len > 0) | 
 | 			shouldsleep = 0;	/* We've a packet to send */ | 
 | 		else if (priv->resp_len[priv->resp_idx]) | 
 | 			shouldsleep = 0;	/* We have a command response */ | 
 | 		else if (priv->cur_cmd) | 
 | 			shouldsleep = 1;	/* Can't send a command; one already running */ | 
 | 		else if (!list_empty(&priv->cmdpendingq) && | 
 | 					!(priv->wakeup_dev_required)) | 
 | 			shouldsleep = 0;	/* We have a command to send */ | 
 | 		else if (__kfifo_len(priv->event_fifo)) | 
 | 			shouldsleep = 0;	/* We have an event to process */ | 
 | 		else | 
 | 			shouldsleep = 1;	/* No command */ | 
 |  | 
 | 		if (shouldsleep) { | 
 | 			lbs_deb_thread("sleeping, connect_status %d, " | 
 | 				"psmode %d, psstate %d\n", | 
 | 				priv->connect_status, | 
 | 				priv->psmode, priv->psstate); | 
 | 			spin_unlock_irq(&priv->driver_lock); | 
 | 			schedule(); | 
 | 		} else | 
 | 			spin_unlock_irq(&priv->driver_lock); | 
 |  | 
 | 		lbs_deb_thread("2: currenttxskb %p, dnld_send %d\n", | 
 | 			       priv->currenttxskb, priv->dnld_sent); | 
 |  | 
 | 		set_current_state(TASK_RUNNING); | 
 | 		remove_wait_queue(&priv->waitq, &wait); | 
 |  | 
 | 		lbs_deb_thread("3: currenttxskb %p, dnld_sent %d\n", | 
 | 			       priv->currenttxskb, priv->dnld_sent); | 
 |  | 
 | 		if (kthread_should_stop()) { | 
 | 			lbs_deb_thread("break from main thread\n"); | 
 | 			break; | 
 | 		} | 
 |  | 
 | 		if (priv->surpriseremoved) { | 
 | 			lbs_deb_thread("adapter removed; waiting to die...\n"); | 
 | 			continue; | 
 | 		} | 
 |  | 
 | 		lbs_deb_thread("4: currenttxskb %p, dnld_sent %d\n", | 
 | 		       priv->currenttxskb, priv->dnld_sent); | 
 |  | 
 | 		/* Process any pending command response */ | 
 | 		spin_lock_irq(&priv->driver_lock); | 
 | 		resp_idx = priv->resp_idx; | 
 | 		if (priv->resp_len[resp_idx]) { | 
 | 			spin_unlock_irq(&priv->driver_lock); | 
 | 			lbs_process_command_response(priv, | 
 | 				priv->resp_buf[resp_idx], | 
 | 				priv->resp_len[resp_idx]); | 
 | 			spin_lock_irq(&priv->driver_lock); | 
 | 			priv->resp_len[resp_idx] = 0; | 
 | 		} | 
 | 		spin_unlock_irq(&priv->driver_lock); | 
 |  | 
 | 		/* Process hardware events, e.g. card removed, link lost */ | 
 | 		spin_lock_irq(&priv->driver_lock); | 
 | 		while (__kfifo_len(priv->event_fifo)) { | 
 | 			u32 event; | 
 | 			__kfifo_get(priv->event_fifo, (unsigned char *) &event, | 
 | 				sizeof(event)); | 
 | 			spin_unlock_irq(&priv->driver_lock); | 
 | 			lbs_process_event(priv, event); | 
 | 			spin_lock_irq(&priv->driver_lock); | 
 | 		} | 
 | 		spin_unlock_irq(&priv->driver_lock); | 
 |  | 
 | 		if (priv->wakeup_dev_required) { | 
 | 			lbs_deb_thread("Waking up device...\n"); | 
 | 			/* Wake up device */ | 
 | 			if (priv->exit_deep_sleep(priv)) | 
 | 				lbs_deb_thread("Wakeup device failed\n"); | 
 | 			continue; | 
 | 		} | 
 |  | 
 | 		/* command timeout stuff */ | 
 | 		if (priv->cmd_timed_out && priv->cur_cmd) { | 
 | 			struct cmd_ctrl_node *cmdnode = priv->cur_cmd; | 
 |  | 
 | 			if (++priv->nr_retries > 3) { | 
 | 				lbs_pr_info("Excessive timeouts submitting " | 
 | 					"command 0x%04x\n", | 
 | 					le16_to_cpu(cmdnode->cmdbuf->command)); | 
 | 				lbs_complete_command(priv, cmdnode, -ETIMEDOUT); | 
 | 				priv->nr_retries = 0; | 
 | 				if (priv->reset_card) | 
 | 					priv->reset_card(priv); | 
 | 			} else { | 
 | 				priv->cur_cmd = NULL; | 
 | 				priv->dnld_sent = DNLD_RES_RECEIVED; | 
 | 				lbs_pr_info("requeueing command 0x%04x due " | 
 | 					"to timeout (#%d)\n", | 
 | 					le16_to_cpu(cmdnode->cmdbuf->command), | 
 | 					priv->nr_retries); | 
 |  | 
 | 				/* Stick it back at the _top_ of the pending queue | 
 | 				   for immediate resubmission */ | 
 | 				list_add(&cmdnode->list, &priv->cmdpendingq); | 
 | 			} | 
 | 		} | 
 | 		priv->cmd_timed_out = 0; | 
 |  | 
 |  | 
 |  | 
 | 		if (!priv->fw_ready) | 
 | 			continue; | 
 |  | 
 | 		/* Check if we need to confirm Sleep Request received previously */ | 
 | 		if (priv->psstate == PS_STATE_PRE_SLEEP && | 
 | 		    !priv->dnld_sent && !priv->cur_cmd) { | 
 | 			if (priv->connect_status == LBS_CONNECTED) { | 
 | 				lbs_deb_thread("pre-sleep, currenttxskb %p, " | 
 | 					"dnld_sent %d, cur_cmd %p\n", | 
 | 					priv->currenttxskb, priv->dnld_sent, | 
 | 					priv->cur_cmd); | 
 |  | 
 | 				lbs_ps_confirm_sleep(priv); | 
 | 			} else { | 
 | 				/* workaround for firmware sending | 
 | 				 * deauth/linkloss event immediately | 
 | 				 * after sleep request; remove this | 
 | 				 * after firmware fixes it | 
 | 				 */ | 
 | 				priv->psstate = PS_STATE_AWAKE; | 
 | 				lbs_pr_alert("ignore PS_SleepConfirm in " | 
 | 					"non-connected state\n"); | 
 | 			} | 
 | 		} | 
 |  | 
 | 		/* The PS state is changed during processing of Sleep Request | 
 | 		 * event above | 
 | 		 */ | 
 | 		if ((priv->psstate == PS_STATE_SLEEP) || | 
 | 		    (priv->psstate == PS_STATE_PRE_SLEEP)) | 
 | 			continue; | 
 |  | 
 | 		if (priv->is_deep_sleep) | 
 | 			continue; | 
 |  | 
 | 		/* Execute the next command */ | 
 | 		if (!priv->dnld_sent && !priv->cur_cmd) | 
 | 			lbs_execute_next_command(priv); | 
 |  | 
 | 		/* Wake-up command waiters which can't sleep in | 
 | 		 * lbs_prepare_and_send_command | 
 | 		 */ | 
 | 		if (!list_empty(&priv->cmdpendingq)) | 
 | 			wake_up_all(&priv->cmd_pending); | 
 |  | 
 | 		spin_lock_irq(&priv->driver_lock); | 
 | 		if (!priv->dnld_sent && priv->tx_pending_len > 0) { | 
 | 			int ret = priv->hw_host_to_card(priv, MVMS_DAT, | 
 | 							priv->tx_pending_buf, | 
 | 							priv->tx_pending_len); | 
 | 			if (ret) { | 
 | 				lbs_deb_tx("host_to_card failed %d\n", ret); | 
 | 				priv->dnld_sent = DNLD_RES_RECEIVED; | 
 | 			} | 
 | 			priv->tx_pending_len = 0; | 
 | 			if (!priv->currenttxskb) { | 
 | 				/* We can wake the queues immediately if we aren't | 
 | 				   waiting for TX feedback */ | 
 | 				if (priv->connect_status == LBS_CONNECTED) | 
 | 					netif_wake_queue(priv->dev); | 
 | 				if (priv->mesh_dev && | 
 | 				    priv->mesh_connect_status == LBS_CONNECTED) | 
 | 					netif_wake_queue(priv->mesh_dev); | 
 | 			} | 
 | 		} | 
 | 		spin_unlock_irq(&priv->driver_lock); | 
 | 	} | 
 |  | 
 | 	del_timer(&priv->command_timer); | 
 | 	del_timer(&priv->auto_deepsleep_timer); | 
 | 	wake_up_all(&priv->cmd_pending); | 
 |  | 
 | 	lbs_deb_leave(LBS_DEB_THREAD); | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int lbs_suspend_callback(struct lbs_private *priv, unsigned long dummy, | 
 | 				struct cmd_header *cmd) | 
 | { | 
 | 	lbs_deb_enter(LBS_DEB_FW); | 
 |  | 
 | 	netif_device_detach(priv->dev); | 
 | 	if (priv->mesh_dev) | 
 | 		netif_device_detach(priv->mesh_dev); | 
 |  | 
 | 	priv->fw_ready = 0; | 
 | 	lbs_deb_leave(LBS_DEB_FW); | 
 | 	return 0; | 
 | } | 
 |  | 
 | int lbs_suspend(struct lbs_private *priv) | 
 | { | 
 | 	struct cmd_header cmd; | 
 | 	int ret; | 
 |  | 
 | 	lbs_deb_enter(LBS_DEB_FW); | 
 |  | 
 | 	if (priv->wol_criteria == 0xffffffff) { | 
 | 		lbs_pr_info("Suspend attempt without configuring wake params!\n"); | 
 | 		return -EINVAL; | 
 | 	} | 
 |  | 
 | 	memset(&cmd, 0, sizeof(cmd)); | 
 |  | 
 | 	ret = __lbs_cmd(priv, CMD_802_11_HOST_SLEEP_ACTIVATE, &cmd, | 
 | 			sizeof(cmd), lbs_suspend_callback, 0); | 
 | 	if (ret) | 
 | 		lbs_pr_info("HOST_SLEEP_ACTIVATE failed: %d\n", ret); | 
 |  | 
 | 	lbs_deb_leave_args(LBS_DEB_FW, "ret %d", ret); | 
 | 	return ret; | 
 | } | 
 | EXPORT_SYMBOL_GPL(lbs_suspend); | 
 |  | 
 | void lbs_resume(struct lbs_private *priv) | 
 | { | 
 | 	lbs_deb_enter(LBS_DEB_FW); | 
 |  | 
 | 	priv->fw_ready = 1; | 
 |  | 
 | 	/* Firmware doesn't seem to give us RX packets any more | 
 | 	   until we send it some command. Might as well update */ | 
 | 	lbs_prepare_and_send_command(priv, CMD_802_11_RSSI, 0, | 
 | 				     0, 0, NULL); | 
 |  | 
 | 	netif_device_attach(priv->dev); | 
 | 	if (priv->mesh_dev) | 
 | 		netif_device_attach(priv->mesh_dev); | 
 |  | 
 | 	lbs_deb_leave(LBS_DEB_FW); | 
 | } | 
 | EXPORT_SYMBOL_GPL(lbs_resume); | 
 |  | 
 | /** | 
 |  * @brief This function gets the HW spec from the firmware and sets | 
 |  *        some basic parameters. | 
 |  * | 
 |  *  @param priv    A pointer to struct lbs_private structure | 
 |  *  @return 	   0 or -1 | 
 |  */ | 
 | static int lbs_setup_firmware(struct lbs_private *priv) | 
 | { | 
 | 	int ret = -1; | 
 | 	s16 curlevel = 0, minlevel = 0, maxlevel = 0; | 
 |  | 
 | 	lbs_deb_enter(LBS_DEB_FW); | 
 |  | 
 | 	/* Read MAC address from firmware */ | 
 | 	memset(priv->current_addr, 0xff, ETH_ALEN); | 
 | 	ret = lbs_update_hw_spec(priv); | 
 | 	if (ret) | 
 | 		goto done; | 
 |  | 
 | 	/* Read power levels if available */ | 
 | 	ret = lbs_get_tx_power(priv, &curlevel, &minlevel, &maxlevel); | 
 | 	if (ret == 0) { | 
 | 		priv->txpower_cur = curlevel; | 
 | 		priv->txpower_min = minlevel; | 
 | 		priv->txpower_max = maxlevel; | 
 | 	} | 
 |  | 
 | 	lbs_set_mac_control(priv); | 
 | done: | 
 | 	lbs_deb_leave_args(LBS_DEB_FW, "ret %d", ret); | 
 | 	return ret; | 
 | } | 
 |  | 
 | /** | 
 |  *  This function handles the timeout of command sending. | 
 |  *  It will re-send the same command again. | 
 |  */ | 
 | static void command_timer_fn(unsigned long data) | 
 | { | 
 | 	struct lbs_private *priv = (struct lbs_private *)data; | 
 | 	unsigned long flags; | 
 |  | 
 | 	lbs_deb_enter(LBS_DEB_CMD); | 
 | 	spin_lock_irqsave(&priv->driver_lock, flags); | 
 |  | 
 | 	if (!priv->cur_cmd) | 
 | 		goto out; | 
 |  | 
 | 	lbs_pr_info("command 0x%04x timed out\n", | 
 | 		le16_to_cpu(priv->cur_cmd->cmdbuf->command)); | 
 |  | 
 | 	priv->cmd_timed_out = 1; | 
 | 	wake_up_interruptible(&priv->waitq); | 
 | out: | 
 | 	spin_unlock_irqrestore(&priv->driver_lock, flags); | 
 | 	lbs_deb_leave(LBS_DEB_CMD); | 
 | } | 
 |  | 
 | /** | 
 |  *  This function put the device back to deep sleep mode when timer expires | 
 |  *  and no activity (command, event, data etc.) is detected. | 
 |  */ | 
 | static void auto_deepsleep_timer_fn(unsigned long data) | 
 | { | 
 | 	struct lbs_private *priv = (struct lbs_private *)data; | 
 | 	int ret; | 
 |  | 
 | 	lbs_deb_enter(LBS_DEB_CMD); | 
 |  | 
 | 	if (priv->is_activity_detected) { | 
 | 		priv->is_activity_detected = 0; | 
 | 	} else { | 
 | 		if (priv->is_auto_deep_sleep_enabled && | 
 | 				(!priv->wakeup_dev_required) && | 
 | 				(priv->connect_status != LBS_CONNECTED)) { | 
 | 			lbs_deb_main("Entering auto deep sleep mode...\n"); | 
 | 			ret = lbs_prepare_and_send_command(priv, | 
 | 					CMD_802_11_DEEP_SLEEP, 0, | 
 | 					0, 0, NULL); | 
 | 			if (ret) | 
 | 				lbs_pr_err("Enter Deep Sleep command failed\n"); | 
 | 		} | 
 | 	} | 
 | 	mod_timer(&priv->auto_deepsleep_timer , jiffies + | 
 | 				(priv->auto_deep_sleep_timeout * HZ)/1000); | 
 | 	lbs_deb_leave(LBS_DEB_CMD); | 
 | } | 
 |  | 
 | int lbs_enter_auto_deep_sleep(struct lbs_private *priv) | 
 | { | 
 | 	lbs_deb_enter(LBS_DEB_SDIO); | 
 |  | 
 | 	priv->is_auto_deep_sleep_enabled = 1; | 
 | 	if (priv->is_deep_sleep) | 
 | 		priv->wakeup_dev_required = 1; | 
 | 	mod_timer(&priv->auto_deepsleep_timer , | 
 | 			jiffies + (priv->auto_deep_sleep_timeout * HZ)/1000); | 
 |  | 
 | 	lbs_deb_leave(LBS_DEB_SDIO); | 
 | 	return 0; | 
 | } | 
 |  | 
 | int lbs_exit_auto_deep_sleep(struct lbs_private *priv) | 
 | { | 
 | 	lbs_deb_enter(LBS_DEB_SDIO); | 
 |  | 
 | 	priv->is_auto_deep_sleep_enabled = 0; | 
 | 	priv->auto_deep_sleep_timeout = 0; | 
 | 	del_timer(&priv->auto_deepsleep_timer); | 
 |  | 
 | 	lbs_deb_leave(LBS_DEB_SDIO); | 
 | 	return 0; | 
 | } | 
 |  | 
 | static void lbs_sync_channel_worker(struct work_struct *work) | 
 | { | 
 | 	struct lbs_private *priv = container_of(work, struct lbs_private, | 
 | 		sync_channel); | 
 |  | 
 | 	lbs_deb_enter(LBS_DEB_MAIN); | 
 | 	if (lbs_update_channel(priv)) | 
 | 		lbs_pr_info("Channel synchronization failed."); | 
 | 	lbs_deb_leave(LBS_DEB_MAIN); | 
 | } | 
 |  | 
 |  | 
 | static int lbs_init_adapter(struct lbs_private *priv) | 
 | { | 
 | 	size_t bufsize; | 
 | 	int i, ret = 0; | 
 |  | 
 | 	lbs_deb_enter(LBS_DEB_MAIN); | 
 |  | 
 | 	/* Allocate buffer to store the BSSID list */ | 
 | 	bufsize = MAX_NETWORK_COUNT * sizeof(struct bss_descriptor); | 
 | 	priv->networks = kzalloc(bufsize, GFP_KERNEL); | 
 | 	if (!priv->networks) { | 
 | 		lbs_pr_err("Out of memory allocating beacons\n"); | 
 | 		ret = -1; | 
 | 		goto out; | 
 | 	} | 
 |  | 
 | 	/* Initialize scan result lists */ | 
 | 	INIT_LIST_HEAD(&priv->network_free_list); | 
 | 	INIT_LIST_HEAD(&priv->network_list); | 
 | 	for (i = 0; i < MAX_NETWORK_COUNT; i++) { | 
 | 		list_add_tail(&priv->networks[i].list, | 
 | 			      &priv->network_free_list); | 
 | 	} | 
 |  | 
 | 	memset(priv->current_addr, 0xff, ETH_ALEN); | 
 |  | 
 | 	priv->connect_status = LBS_DISCONNECTED; | 
 | 	priv->mesh_connect_status = LBS_DISCONNECTED; | 
 | 	priv->secinfo.auth_mode = IW_AUTH_ALG_OPEN_SYSTEM; | 
 | 	priv->mode = IW_MODE_INFRA; | 
 | 	priv->channel = DEFAULT_AD_HOC_CHANNEL; | 
 | 	priv->mac_control = CMD_ACT_MAC_RX_ON | CMD_ACT_MAC_TX_ON; | 
 | 	priv->radio_on = 1; | 
 | 	priv->enablehwauto = 1; | 
 | 	priv->capability = WLAN_CAPABILITY_SHORT_PREAMBLE; | 
 | 	priv->psmode = LBS802_11POWERMODECAM; | 
 | 	priv->psstate = PS_STATE_FULL_POWER; | 
 | 	priv->is_deep_sleep = 0; | 
 | 	priv->is_auto_deep_sleep_enabled = 0; | 
 | 	priv->wakeup_dev_required = 0; | 
 | 	init_waitqueue_head(&priv->ds_awake_q); | 
 |  | 
 | 	mutex_init(&priv->lock); | 
 |  | 
 | 	setup_timer(&priv->command_timer, command_timer_fn, | 
 | 		(unsigned long)priv); | 
 | 	setup_timer(&priv->auto_deepsleep_timer, auto_deepsleep_timer_fn, | 
 | 			(unsigned long)priv); | 
 |  | 
 | 	INIT_LIST_HEAD(&priv->cmdfreeq); | 
 | 	INIT_LIST_HEAD(&priv->cmdpendingq); | 
 |  | 
 | 	spin_lock_init(&priv->driver_lock); | 
 | 	init_waitqueue_head(&priv->cmd_pending); | 
 |  | 
 | 	/* Allocate the command buffers */ | 
 | 	if (lbs_allocate_cmd_buffer(priv)) { | 
 | 		lbs_pr_err("Out of memory allocating command buffers\n"); | 
 | 		ret = -ENOMEM; | 
 | 		goto out; | 
 | 	} | 
 | 	priv->resp_idx = 0; | 
 | 	priv->resp_len[0] = priv->resp_len[1] = 0; | 
 |  | 
 | 	/* Create the event FIFO */ | 
 | 	priv->event_fifo = kfifo_alloc(sizeof(u32) * 16, GFP_KERNEL, NULL); | 
 | 	if (IS_ERR(priv->event_fifo)) { | 
 | 		lbs_pr_err("Out of memory allocating event FIFO buffer\n"); | 
 | 		ret = -ENOMEM; | 
 | 		goto out; | 
 | 	} | 
 |  | 
 | out: | 
 | 	lbs_deb_leave_args(LBS_DEB_MAIN, "ret %d", ret); | 
 |  | 
 | 	return ret; | 
 | } | 
 |  | 
 | static void lbs_free_adapter(struct lbs_private *priv) | 
 | { | 
 | 	lbs_deb_enter(LBS_DEB_MAIN); | 
 |  | 
 | 	lbs_free_cmd_buffer(priv); | 
 | 	if (priv->event_fifo) | 
 | 		kfifo_free(priv->event_fifo); | 
 | 	del_timer(&priv->command_timer); | 
 | 	del_timer(&priv->auto_deepsleep_timer); | 
 | 	kfree(priv->networks); | 
 | 	priv->networks = NULL; | 
 |  | 
 | 	lbs_deb_leave(LBS_DEB_MAIN); | 
 | } | 
 |  | 
 | static const struct net_device_ops lbs_netdev_ops = { | 
 | 	.ndo_open 		= lbs_dev_open, | 
 | 	.ndo_stop		= lbs_eth_stop, | 
 | 	.ndo_start_xmit		= lbs_hard_start_xmit, | 
 | 	.ndo_set_mac_address	= lbs_set_mac_address, | 
 | 	.ndo_tx_timeout 	= lbs_tx_timeout, | 
 | 	.ndo_set_multicast_list = lbs_set_multicast_list, | 
 | 	.ndo_change_mtu		= eth_change_mtu, | 
 | 	.ndo_validate_addr	= eth_validate_addr, | 
 | }; | 
 |  | 
 | /** | 
 |  * @brief This function adds the card. it will probe the | 
 |  * card, allocate the lbs_priv and initialize the device. | 
 |  * | 
 |  *  @param card    A pointer to card | 
 |  *  @return 	   A pointer to struct lbs_private structure | 
 |  */ | 
 | struct lbs_private *lbs_add_card(void *card, struct device *dmdev) | 
 | { | 
 | 	struct net_device *dev; | 
 | 	struct wireless_dev *wdev; | 
 | 	struct lbs_private *priv = NULL; | 
 |  | 
 | 	lbs_deb_enter(LBS_DEB_MAIN); | 
 |  | 
 | 	/* Allocate an Ethernet device and register it */ | 
 | 	wdev = lbs_cfg_alloc(dmdev); | 
 | 	if (IS_ERR(wdev)) { | 
 | 		lbs_pr_err("cfg80211 init failed\n"); | 
 | 		goto done; | 
 | 	} | 
 | 	/* TODO? */ | 
 | 	wdev->iftype = NL80211_IFTYPE_STATION; | 
 | 	priv = wdev_priv(wdev); | 
 | 	priv->wdev = wdev; | 
 |  | 
 | 	if (lbs_init_adapter(priv)) { | 
 | 		lbs_pr_err("failed to initialize adapter structure.\n"); | 
 | 		goto err_wdev; | 
 | 	} | 
 |  | 
 | 	//TODO? dev = alloc_netdev_mq(0, "wlan%d", ether_setup, IWM_TX_QUEUES); | 
 | 	dev = alloc_netdev(0, "wlan%d", ether_setup); | 
 | 	if (!dev) { | 
 | 		dev_err(dmdev, "no memory for network device instance\n"); | 
 | 		goto err_adapter; | 
 | 	} | 
 |  | 
 | 	dev->ieee80211_ptr = wdev; | 
 | 	dev->ml_priv = priv; | 
 | 	SET_NETDEV_DEV(dev, dmdev); | 
 | 	wdev->netdev = dev; | 
 | 	priv->dev = dev; | 
 |  | 
 |  	dev->netdev_ops = &lbs_netdev_ops; | 
 | 	dev->watchdog_timeo = 5 * HZ; | 
 | 	dev->ethtool_ops = &lbs_ethtool_ops; | 
 | #ifdef	WIRELESS_EXT | 
 | 	dev->wireless_handlers = &lbs_handler_def; | 
 | #endif | 
 | 	dev->flags |= IFF_BROADCAST | IFF_MULTICAST; | 
 |  | 
 |  | 
 | 	// TODO: kzalloc + iwm_init_default_profile(iwm, iwm->umac_profile); ?? | 
 |  | 
 |  | 
 | 	priv->card = card; | 
 | 	priv->infra_open = 0; | 
 |  | 
 |  | 
 | 	priv->rtap_net_dev = NULL; | 
 | 	strcpy(dev->name, "wlan%d"); | 
 |  | 
 | 	lbs_deb_thread("Starting main thread...\n"); | 
 | 	init_waitqueue_head(&priv->waitq); | 
 | 	priv->main_thread = kthread_run(lbs_thread, dev, "lbs_main"); | 
 | 	if (IS_ERR(priv->main_thread)) { | 
 | 		lbs_deb_thread("Error creating main thread.\n"); | 
 | 		goto err_ndev; | 
 | 	} | 
 |  | 
 | 	priv->work_thread = create_singlethread_workqueue("lbs_worker"); | 
 | 	INIT_DELAYED_WORK(&priv->assoc_work, lbs_association_worker); | 
 | 	INIT_DELAYED_WORK(&priv->scan_work, lbs_scan_worker); | 
 | 	INIT_WORK(&priv->mcast_work, lbs_set_mcast_worker); | 
 | 	INIT_WORK(&priv->sync_channel, lbs_sync_channel_worker); | 
 |  | 
 | 	priv->mesh_open = 0; | 
 | 	sprintf(priv->mesh_ssid, "mesh"); | 
 | 	priv->mesh_ssid_len = 4; | 
 |  | 
 | 	priv->wol_criteria = 0xffffffff; | 
 | 	priv->wol_gpio = 0xff; | 
 |  | 
 | 	goto done; | 
 |  | 
 |  err_ndev: | 
 | 	free_netdev(dev); | 
 |  | 
 |  err_adapter: | 
 | 	lbs_free_adapter(priv); | 
 |  | 
 |  err_wdev: | 
 | 	lbs_cfg_free(priv); | 
 |  | 
 | 	priv = NULL; | 
 |  | 
 | done: | 
 | 	lbs_deb_leave_args(LBS_DEB_MAIN, "priv %p", priv); | 
 | 	return priv; | 
 | } | 
 | EXPORT_SYMBOL_GPL(lbs_add_card); | 
 |  | 
 |  | 
 | void lbs_remove_card(struct lbs_private *priv) | 
 | { | 
 | 	struct net_device *dev = priv->dev; | 
 |  | 
 | 	lbs_deb_enter(LBS_DEB_MAIN); | 
 |  | 
 | 	lbs_remove_mesh(priv); | 
 | 	lbs_remove_rtap(priv); | 
 |  | 
 | 	dev = priv->dev; | 
 |  | 
 | 	cancel_delayed_work_sync(&priv->scan_work); | 
 | 	cancel_delayed_work_sync(&priv->assoc_work); | 
 | 	cancel_work_sync(&priv->mcast_work); | 
 |  | 
 | 	/* worker thread destruction blocks on the in-flight command which | 
 | 	 * should have been cleared already in lbs_stop_card(). | 
 | 	 */ | 
 | 	lbs_deb_main("destroying worker thread\n"); | 
 | 	destroy_workqueue(priv->work_thread); | 
 | 	lbs_deb_main("done destroying worker thread\n"); | 
 |  | 
 | 	if (priv->psmode == LBS802_11POWERMODEMAX_PSP) { | 
 | 		priv->psmode = LBS802_11POWERMODECAM; | 
 | 		lbs_ps_wakeup(priv, CMD_OPTION_WAITFORRSP); | 
 | 	} | 
 |  | 
 | 	lbs_send_disconnect_notification(priv); | 
 |  | 
 | 	if (priv->is_deep_sleep) { | 
 | 		priv->is_deep_sleep = 0; | 
 | 		wake_up_interruptible(&priv->ds_awake_q); | 
 | 	} | 
 |  | 
 | 	/* Stop the thread servicing the interrupts */ | 
 | 	priv->surpriseremoved = 1; | 
 | 	kthread_stop(priv->main_thread); | 
 |  | 
 | 	lbs_free_adapter(priv); | 
 | 	lbs_cfg_free(priv); | 
 |  | 
 | 	priv->dev = NULL; | 
 | 	free_netdev(dev); | 
 |  | 
 | 	lbs_deb_leave(LBS_DEB_MAIN); | 
 | } | 
 | EXPORT_SYMBOL_GPL(lbs_remove_card); | 
 |  | 
 |  | 
 | int lbs_start_card(struct lbs_private *priv) | 
 | { | 
 | 	struct net_device *dev = priv->dev; | 
 | 	int ret = -1; | 
 |  | 
 | 	lbs_deb_enter(LBS_DEB_MAIN); | 
 |  | 
 | 	/* poke the firmware */ | 
 | 	ret = lbs_setup_firmware(priv); | 
 | 	if (ret) | 
 | 		goto done; | 
 |  | 
 | 	if (lbs_cfg_register(priv)) { | 
 | 		lbs_pr_err("cannot register device\n"); | 
 | 		goto done; | 
 | 	} | 
 |  | 
 | 	lbs_update_channel(priv); | 
 |  | 
 | 	/* | 
 | 	 * While rtap isn't related to mesh, only mesh-enabled | 
 | 	 * firmware implements the rtap functionality via | 
 | 	 * CMD_802_11_MONITOR_MODE. | 
 | 	 */ | 
 | 	if (lbs_init_mesh(priv)) { | 
 | 		if (device_create_file(&dev->dev, &dev_attr_lbs_rtap)) | 
 | 			lbs_pr_err("cannot register lbs_rtap attribute\n"); | 
 | 	} | 
 |  | 
 | 	lbs_debugfs_init_one(priv, dev); | 
 |  | 
 | 	lbs_pr_info("%s: Marvell WLAN 802.11 adapter\n", dev->name); | 
 |  | 
 | 	ret = 0; | 
 |  | 
 | done: | 
 | 	lbs_deb_leave_args(LBS_DEB_MAIN, "ret %d", ret); | 
 | 	return ret; | 
 | } | 
 | EXPORT_SYMBOL_GPL(lbs_start_card); | 
 |  | 
 |  | 
 | void lbs_stop_card(struct lbs_private *priv) | 
 | { | 
 | 	struct net_device *dev; | 
 | 	struct cmd_ctrl_node *cmdnode; | 
 | 	unsigned long flags; | 
 |  | 
 | 	lbs_deb_enter(LBS_DEB_MAIN); | 
 |  | 
 | 	if (!priv) | 
 | 		goto out; | 
 | 	dev = priv->dev; | 
 |  | 
 | 	netif_stop_queue(dev); | 
 | 	netif_carrier_off(dev); | 
 |  | 
 | 	lbs_debugfs_remove_one(priv); | 
 | 	if (lbs_deinit_mesh(priv)) | 
 | 		device_remove_file(&dev->dev, &dev_attr_lbs_rtap); | 
 |  | 
 | 	/* Delete the timeout of the currently processing command */ | 
 | 	del_timer_sync(&priv->command_timer); | 
 | 	del_timer_sync(&priv->auto_deepsleep_timer); | 
 |  | 
 | 	/* Flush pending command nodes */ | 
 | 	spin_lock_irqsave(&priv->driver_lock, flags); | 
 | 	lbs_deb_main("clearing pending commands\n"); | 
 | 	list_for_each_entry(cmdnode, &priv->cmdpendingq, list) { | 
 | 		cmdnode->result = -ENOENT; | 
 | 		cmdnode->cmdwaitqwoken = 1; | 
 | 		wake_up_interruptible(&cmdnode->cmdwait_q); | 
 | 	} | 
 |  | 
 | 	/* Flush the command the card is currently processing */ | 
 | 	if (priv->cur_cmd) { | 
 | 		lbs_deb_main("clearing current command\n"); | 
 | 		priv->cur_cmd->result = -ENOENT; | 
 | 		priv->cur_cmd->cmdwaitqwoken = 1; | 
 | 		wake_up_interruptible(&priv->cur_cmd->cmdwait_q); | 
 | 	} | 
 | 	lbs_deb_main("done clearing commands\n"); | 
 | 	spin_unlock_irqrestore(&priv->driver_lock, flags); | 
 |  | 
 | 	unregister_netdev(dev); | 
 |  | 
 | out: | 
 | 	lbs_deb_leave(LBS_DEB_MAIN); | 
 | } | 
 | EXPORT_SYMBOL_GPL(lbs_stop_card); | 
 |  | 
 |  | 
 | void lbs_queue_event(struct lbs_private *priv, u32 event) | 
 | { | 
 | 	unsigned long flags; | 
 |  | 
 | 	lbs_deb_enter(LBS_DEB_THREAD); | 
 | 	spin_lock_irqsave(&priv->driver_lock, flags); | 
 |  | 
 | 	if (priv->psstate == PS_STATE_SLEEP) | 
 | 		priv->psstate = PS_STATE_AWAKE; | 
 |  | 
 | 	__kfifo_put(priv->event_fifo, (unsigned char *) &event, sizeof(u32)); | 
 |  | 
 | 	wake_up_interruptible(&priv->waitq); | 
 |  | 
 | 	spin_unlock_irqrestore(&priv->driver_lock, flags); | 
 | 	lbs_deb_leave(LBS_DEB_THREAD); | 
 | } | 
 | EXPORT_SYMBOL_GPL(lbs_queue_event); | 
 |  | 
 | void lbs_notify_command_response(struct lbs_private *priv, u8 resp_idx) | 
 | { | 
 | 	lbs_deb_enter(LBS_DEB_THREAD); | 
 |  | 
 | 	if (priv->psstate == PS_STATE_SLEEP) | 
 | 		priv->psstate = PS_STATE_AWAKE; | 
 |  | 
 | 	/* Swap buffers by flipping the response index */ | 
 | 	BUG_ON(resp_idx > 1); | 
 | 	priv->resp_idx = resp_idx; | 
 |  | 
 | 	wake_up_interruptible(&priv->waitq); | 
 |  | 
 | 	lbs_deb_leave(LBS_DEB_THREAD); | 
 | } | 
 | EXPORT_SYMBOL_GPL(lbs_notify_command_response); | 
 |  | 
 | static int __init lbs_init_module(void) | 
 | { | 
 | 	lbs_deb_enter(LBS_DEB_MAIN); | 
 | 	memset(&confirm_sleep, 0, sizeof(confirm_sleep)); | 
 | 	confirm_sleep.hdr.command = cpu_to_le16(CMD_802_11_PS_MODE); | 
 | 	confirm_sleep.hdr.size = cpu_to_le16(sizeof(confirm_sleep)); | 
 | 	confirm_sleep.action = cpu_to_le16(CMD_SUBCMD_SLEEP_CONFIRMED); | 
 | 	lbs_debugfs_init(); | 
 | 	lbs_deb_leave(LBS_DEB_MAIN); | 
 | 	return 0; | 
 | } | 
 |  | 
 | static void __exit lbs_exit_module(void) | 
 | { | 
 | 	lbs_deb_enter(LBS_DEB_MAIN); | 
 | 	lbs_debugfs_remove(); | 
 | 	lbs_deb_leave(LBS_DEB_MAIN); | 
 | } | 
 |  | 
 | /* | 
 |  * rtap interface support fuctions | 
 |  */ | 
 |  | 
 | static int lbs_rtap_open(struct net_device *dev) | 
 | { | 
 | 	/* Yes, _stop_ the queue. Because we don't support injection */ | 
 | 	lbs_deb_enter(LBS_DEB_MAIN); | 
 | 	netif_carrier_off(dev); | 
 | 	netif_stop_queue(dev); | 
 | 	lbs_deb_leave(LBS_DEB_LEAVE); | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int lbs_rtap_stop(struct net_device *dev) | 
 | { | 
 | 	lbs_deb_enter(LBS_DEB_MAIN); | 
 | 	lbs_deb_leave(LBS_DEB_MAIN); | 
 | 	return 0; | 
 | } | 
 |  | 
 | static netdev_tx_t lbs_rtap_hard_start_xmit(struct sk_buff *skb, | 
 | 					    struct net_device *dev) | 
 | { | 
 | 	netif_stop_queue(dev); | 
 | 	return NETDEV_TX_BUSY; | 
 | } | 
 |  | 
 | static void lbs_remove_rtap(struct lbs_private *priv) | 
 | { | 
 | 	lbs_deb_enter(LBS_DEB_MAIN); | 
 | 	if (priv->rtap_net_dev == NULL) | 
 | 		goto out; | 
 | 	unregister_netdev(priv->rtap_net_dev); | 
 | 	free_netdev(priv->rtap_net_dev); | 
 | 	priv->rtap_net_dev = NULL; | 
 | out: | 
 | 	lbs_deb_leave(LBS_DEB_MAIN); | 
 | } | 
 |  | 
 | static const struct net_device_ops rtap_netdev_ops = { | 
 | 	.ndo_open = lbs_rtap_open, | 
 | 	.ndo_stop = lbs_rtap_stop, | 
 | 	.ndo_start_xmit = lbs_rtap_hard_start_xmit, | 
 | }; | 
 |  | 
 | static int lbs_add_rtap(struct lbs_private *priv) | 
 | { | 
 | 	int ret = 0; | 
 | 	struct net_device *rtap_dev; | 
 |  | 
 | 	lbs_deb_enter(LBS_DEB_MAIN); | 
 | 	if (priv->rtap_net_dev) { | 
 | 		ret = -EPERM; | 
 | 		goto out; | 
 | 	} | 
 |  | 
 | 	rtap_dev = alloc_netdev(0, "rtap%d", ether_setup); | 
 | 	if (rtap_dev == NULL) { | 
 | 		ret = -ENOMEM; | 
 | 		goto out; | 
 | 	} | 
 |  | 
 | 	memcpy(rtap_dev->dev_addr, priv->current_addr, ETH_ALEN); | 
 | 	rtap_dev->type = ARPHRD_IEEE80211_RADIOTAP; | 
 | 	rtap_dev->netdev_ops = &rtap_netdev_ops; | 
 | 	rtap_dev->ml_priv = priv; | 
 | 	SET_NETDEV_DEV(rtap_dev, priv->dev->dev.parent); | 
 |  | 
 | 	ret = register_netdev(rtap_dev); | 
 | 	if (ret) { | 
 | 		free_netdev(rtap_dev); | 
 | 		goto out; | 
 | 	} | 
 | 	priv->rtap_net_dev = rtap_dev; | 
 |  | 
 | out: | 
 | 	lbs_deb_leave_args(LBS_DEB_MAIN, "ret %d", ret); | 
 | 	return ret; | 
 | } | 
 |  | 
 | module_init(lbs_init_module); | 
 | module_exit(lbs_exit_module); | 
 |  | 
 | MODULE_DESCRIPTION("Libertas WLAN Driver Library"); | 
 | MODULE_AUTHOR("Marvell International Ltd."); | 
 | MODULE_LICENSE("GPL"); |