| // SPDX-License-Identifier: GPL-2.0+ |
| // |
| // Security related flags and so on. |
| // |
| // Copyright 2018, Michael Ellerman, IBM Corporation. |
| |
| #include <linux/kernel.h> |
| #include <linux/device.h> |
| #include <linux/seq_buf.h> |
| |
| #include <asm/asm-prototypes.h> |
| #include <asm/code-patching.h> |
| #include <asm/debugfs.h> |
| #include <asm/security_features.h> |
| #include <asm/setup.h> |
| |
| |
| unsigned long powerpc_security_features __read_mostly = SEC_FTR_DEFAULT; |
| |
| enum count_cache_flush_type { |
| COUNT_CACHE_FLUSH_NONE = 0x1, |
| COUNT_CACHE_FLUSH_SW = 0x2, |
| COUNT_CACHE_FLUSH_HW = 0x4, |
| }; |
| static enum count_cache_flush_type count_cache_flush_type; |
| |
| bool barrier_nospec_enabled; |
| static bool no_nospec; |
| |
| static void enable_barrier_nospec(bool enable) |
| { |
| barrier_nospec_enabled = enable; |
| do_barrier_nospec_fixups(enable); |
| } |
| |
| void setup_barrier_nospec(void) |
| { |
| bool enable; |
| |
| /* |
| * It would make sense to check SEC_FTR_SPEC_BAR_ORI31 below as well. |
| * But there's a good reason not to. The two flags we check below are |
| * both are enabled by default in the kernel, so if the hcall is not |
| * functional they will be enabled. |
| * On a system where the host firmware has been updated (so the ori |
| * functions as a barrier), but on which the hypervisor (KVM/Qemu) has |
| * not been updated, we would like to enable the barrier. Dropping the |
| * check for SEC_FTR_SPEC_BAR_ORI31 achieves that. The only downside is |
| * we potentially enable the barrier on systems where the host firmware |
| * is not updated, but that's harmless as it's a no-op. |
| */ |
| enable = security_ftr_enabled(SEC_FTR_FAVOUR_SECURITY) && |
| security_ftr_enabled(SEC_FTR_BNDS_CHK_SPEC_BAR); |
| |
| if (!no_nospec) |
| enable_barrier_nospec(enable); |
| } |
| |
| static int __init handle_nospectre_v1(char *p) |
| { |
| no_nospec = true; |
| |
| return 0; |
| } |
| early_param("nospectre_v1", handle_nospectre_v1); |
| |
| #ifdef CONFIG_DEBUG_FS |
| static int barrier_nospec_set(void *data, u64 val) |
| { |
| switch (val) { |
| case 0: |
| case 1: |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| if (!!val == !!barrier_nospec_enabled) |
| return 0; |
| |
| enable_barrier_nospec(!!val); |
| |
| return 0; |
| } |
| |
| static int barrier_nospec_get(void *data, u64 *val) |
| { |
| *val = barrier_nospec_enabled ? 1 : 0; |
| return 0; |
| } |
| |
| DEFINE_SIMPLE_ATTRIBUTE(fops_barrier_nospec, |
| barrier_nospec_get, barrier_nospec_set, "%llu\n"); |
| |
| static __init int barrier_nospec_debugfs_init(void) |
| { |
| debugfs_create_file("barrier_nospec", 0600, powerpc_debugfs_root, NULL, |
| &fops_barrier_nospec); |
| return 0; |
| } |
| device_initcall(barrier_nospec_debugfs_init); |
| #endif /* CONFIG_DEBUG_FS */ |
| |
| #ifdef CONFIG_PPC_BOOK3S_64 |
| ssize_t cpu_show_meltdown(struct device *dev, struct device_attribute *attr, char *buf) |
| { |
| bool thread_priv; |
| |
| thread_priv = security_ftr_enabled(SEC_FTR_L1D_THREAD_PRIV); |
| |
| if (rfi_flush || thread_priv) { |
| struct seq_buf s; |
| seq_buf_init(&s, buf, PAGE_SIZE - 1); |
| |
| seq_buf_printf(&s, "Mitigation: "); |
| |
| if (rfi_flush) |
| seq_buf_printf(&s, "RFI Flush"); |
| |
| if (rfi_flush && thread_priv) |
| seq_buf_printf(&s, ", "); |
| |
| if (thread_priv) |
| seq_buf_printf(&s, "L1D private per thread"); |
| |
| seq_buf_printf(&s, "\n"); |
| |
| return s.len; |
| } |
| |
| if (!security_ftr_enabled(SEC_FTR_L1D_FLUSH_HV) && |
| !security_ftr_enabled(SEC_FTR_L1D_FLUSH_PR)) |
| return sprintf(buf, "Not affected\n"); |
| |
| return sprintf(buf, "Vulnerable\n"); |
| } |
| #endif |
| |
| ssize_t cpu_show_spectre_v1(struct device *dev, struct device_attribute *attr, char *buf) |
| { |
| struct seq_buf s; |
| |
| seq_buf_init(&s, buf, PAGE_SIZE - 1); |
| |
| if (security_ftr_enabled(SEC_FTR_BNDS_CHK_SPEC_BAR)) { |
| if (barrier_nospec_enabled) |
| seq_buf_printf(&s, "Mitigation: __user pointer sanitization"); |
| else |
| seq_buf_printf(&s, "Vulnerable"); |
| |
| if (security_ftr_enabled(SEC_FTR_SPEC_BAR_ORI31)) |
| seq_buf_printf(&s, ", ori31 speculation barrier enabled"); |
| |
| seq_buf_printf(&s, "\n"); |
| } else |
| seq_buf_printf(&s, "Not affected\n"); |
| |
| return s.len; |
| } |
| |
| ssize_t cpu_show_spectre_v2(struct device *dev, struct device_attribute *attr, char *buf) |
| { |
| struct seq_buf s; |
| bool bcs, ccd; |
| |
| seq_buf_init(&s, buf, PAGE_SIZE - 1); |
| |
| bcs = security_ftr_enabled(SEC_FTR_BCCTRL_SERIALISED); |
| ccd = security_ftr_enabled(SEC_FTR_COUNT_CACHE_DISABLED); |
| |
| if (bcs || ccd || count_cache_flush_type != COUNT_CACHE_FLUSH_NONE) { |
| bool comma = false; |
| seq_buf_printf(&s, "Mitigation: "); |
| |
| if (bcs) { |
| seq_buf_printf(&s, "Indirect branch serialisation (kernel only)"); |
| comma = true; |
| } |
| |
| if (ccd) { |
| if (comma) |
| seq_buf_printf(&s, ", "); |
| seq_buf_printf(&s, "Indirect branch cache disabled"); |
| comma = true; |
| } |
| |
| if (comma) |
| seq_buf_printf(&s, ", "); |
| |
| seq_buf_printf(&s, "Software count cache flush"); |
| |
| if (count_cache_flush_type == COUNT_CACHE_FLUSH_HW) |
| seq_buf_printf(&s, "(hardware accelerated)"); |
| } else |
| seq_buf_printf(&s, "Vulnerable"); |
| |
| seq_buf_printf(&s, "\n"); |
| |
| return s.len; |
| } |
| |
| #ifdef CONFIG_PPC_BOOK3S_64 |
| /* |
| * Store-forwarding barrier support. |
| */ |
| |
| static enum stf_barrier_type stf_enabled_flush_types; |
| static bool no_stf_barrier; |
| bool stf_barrier; |
| |
| static int __init handle_no_stf_barrier(char *p) |
| { |
| pr_info("stf-barrier: disabled on command line."); |
| no_stf_barrier = true; |
| return 0; |
| } |
| |
| early_param("no_stf_barrier", handle_no_stf_barrier); |
| |
| /* This is the generic flag used by other architectures */ |
| static int __init handle_ssbd(char *p) |
| { |
| if (!p || strncmp(p, "auto", 5) == 0 || strncmp(p, "on", 2) == 0 ) { |
| /* Until firmware tells us, we have the barrier with auto */ |
| return 0; |
| } else if (strncmp(p, "off", 3) == 0) { |
| handle_no_stf_barrier(NULL); |
| return 0; |
| } else |
| return 1; |
| |
| return 0; |
| } |
| early_param("spec_store_bypass_disable", handle_ssbd); |
| |
| /* This is the generic flag used by other architectures */ |
| static int __init handle_no_ssbd(char *p) |
| { |
| handle_no_stf_barrier(NULL); |
| return 0; |
| } |
| early_param("nospec_store_bypass_disable", handle_no_ssbd); |
| |
| static void stf_barrier_enable(bool enable) |
| { |
| if (enable) |
| do_stf_barrier_fixups(stf_enabled_flush_types); |
| else |
| do_stf_barrier_fixups(STF_BARRIER_NONE); |
| |
| stf_barrier = enable; |
| } |
| |
| void setup_stf_barrier(void) |
| { |
| enum stf_barrier_type type; |
| bool enable, hv; |
| |
| hv = cpu_has_feature(CPU_FTR_HVMODE); |
| |
| /* Default to fallback in case fw-features are not available */ |
| if (cpu_has_feature(CPU_FTR_ARCH_300)) |
| type = STF_BARRIER_EIEIO; |
| else if (cpu_has_feature(CPU_FTR_ARCH_207S)) |
| type = STF_BARRIER_SYNC_ORI; |
| else if (cpu_has_feature(CPU_FTR_ARCH_206)) |
| type = STF_BARRIER_FALLBACK; |
| else |
| type = STF_BARRIER_NONE; |
| |
| enable = security_ftr_enabled(SEC_FTR_FAVOUR_SECURITY) && |
| (security_ftr_enabled(SEC_FTR_L1D_FLUSH_PR) || |
| (security_ftr_enabled(SEC_FTR_L1D_FLUSH_HV) && hv)); |
| |
| if (type == STF_BARRIER_FALLBACK) { |
| pr_info("stf-barrier: fallback barrier available\n"); |
| } else if (type == STF_BARRIER_SYNC_ORI) { |
| pr_info("stf-barrier: hwsync barrier available\n"); |
| } else if (type == STF_BARRIER_EIEIO) { |
| pr_info("stf-barrier: eieio barrier available\n"); |
| } |
| |
| stf_enabled_flush_types = type; |
| |
| if (!no_stf_barrier) |
| stf_barrier_enable(enable); |
| } |
| |
| ssize_t cpu_show_spec_store_bypass(struct device *dev, struct device_attribute *attr, char *buf) |
| { |
| if (stf_barrier && stf_enabled_flush_types != STF_BARRIER_NONE) { |
| const char *type; |
| switch (stf_enabled_flush_types) { |
| case STF_BARRIER_EIEIO: |
| type = "eieio"; |
| break; |
| case STF_BARRIER_SYNC_ORI: |
| type = "hwsync"; |
| break; |
| case STF_BARRIER_FALLBACK: |
| type = "fallback"; |
| break; |
| default: |
| type = "unknown"; |
| } |
| return sprintf(buf, "Mitigation: Kernel entry/exit barrier (%s)\n", type); |
| } |
| |
| if (!security_ftr_enabled(SEC_FTR_L1D_FLUSH_HV) && |
| !security_ftr_enabled(SEC_FTR_L1D_FLUSH_PR)) |
| return sprintf(buf, "Not affected\n"); |
| |
| return sprintf(buf, "Vulnerable\n"); |
| } |
| |
| #ifdef CONFIG_DEBUG_FS |
| static int stf_barrier_set(void *data, u64 val) |
| { |
| bool enable; |
| |
| if (val == 1) |
| enable = true; |
| else if (val == 0) |
| enable = false; |
| else |
| return -EINVAL; |
| |
| /* Only do anything if we're changing state */ |
| if (enable != stf_barrier) |
| stf_barrier_enable(enable); |
| |
| return 0; |
| } |
| |
| static int stf_barrier_get(void *data, u64 *val) |
| { |
| *val = stf_barrier ? 1 : 0; |
| return 0; |
| } |
| |
| DEFINE_SIMPLE_ATTRIBUTE(fops_stf_barrier, stf_barrier_get, stf_barrier_set, "%llu\n"); |
| |
| static __init int stf_barrier_debugfs_init(void) |
| { |
| debugfs_create_file("stf_barrier", 0600, powerpc_debugfs_root, NULL, &fops_stf_barrier); |
| return 0; |
| } |
| device_initcall(stf_barrier_debugfs_init); |
| #endif /* CONFIG_DEBUG_FS */ |
| |
| static void toggle_count_cache_flush(bool enable) |
| { |
| if (!enable || !security_ftr_enabled(SEC_FTR_FLUSH_COUNT_CACHE)) { |
| patch_instruction_site(&patch__call_flush_count_cache, PPC_INST_NOP); |
| count_cache_flush_type = COUNT_CACHE_FLUSH_NONE; |
| pr_info("count-cache-flush: software flush disabled.\n"); |
| return; |
| } |
| |
| patch_branch_site(&patch__call_flush_count_cache, |
| (u64)&flush_count_cache, BRANCH_SET_LINK); |
| |
| if (!security_ftr_enabled(SEC_FTR_BCCTR_FLUSH_ASSIST)) { |
| count_cache_flush_type = COUNT_CACHE_FLUSH_SW; |
| pr_info("count-cache-flush: full software flush sequence enabled.\n"); |
| return; |
| } |
| |
| patch_instruction_site(&patch__flush_count_cache_return, PPC_INST_BLR); |
| count_cache_flush_type = COUNT_CACHE_FLUSH_HW; |
| pr_info("count-cache-flush: hardware assisted flush sequence enabled\n"); |
| } |
| |
| void setup_count_cache_flush(void) |
| { |
| toggle_count_cache_flush(true); |
| } |
| |
| #ifdef CONFIG_DEBUG_FS |
| static int count_cache_flush_set(void *data, u64 val) |
| { |
| bool enable; |
| |
| if (val == 1) |
| enable = true; |
| else if (val == 0) |
| enable = false; |
| else |
| return -EINVAL; |
| |
| toggle_count_cache_flush(enable); |
| |
| return 0; |
| } |
| |
| static int count_cache_flush_get(void *data, u64 *val) |
| { |
| if (count_cache_flush_type == COUNT_CACHE_FLUSH_NONE) |
| *val = 0; |
| else |
| *val = 1; |
| |
| return 0; |
| } |
| |
| DEFINE_SIMPLE_ATTRIBUTE(fops_count_cache_flush, count_cache_flush_get, |
| count_cache_flush_set, "%llu\n"); |
| |
| static __init int count_cache_flush_debugfs_init(void) |
| { |
| debugfs_create_file("count_cache_flush", 0600, powerpc_debugfs_root, |
| NULL, &fops_count_cache_flush); |
| return 0; |
| } |
| device_initcall(count_cache_flush_debugfs_init); |
| #endif /* CONFIG_DEBUG_FS */ |
| #endif /* CONFIG_PPC_BOOK3S_64 */ |