| // SPDX-License-Identifier: GPL-2.0-only |
| /* |
| * intel_soc_dts_thermal.c |
| * Copyright (c) 2014, Intel Corporation. |
| */ |
| |
| #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt |
| |
| #include <linux/acpi.h> |
| #include <linux/module.h> |
| #include <linux/interrupt.h> |
| #include <asm/cpu_device_id.h> |
| #include <asm/intel-family.h> |
| #include "intel_soc_dts_iosf.h" |
| |
| #define CRITICAL_OFFSET_FROM_TJ_MAX 5000 |
| |
| static int crit_offset = CRITICAL_OFFSET_FROM_TJ_MAX; |
| module_param(crit_offset, int, 0644); |
| MODULE_PARM_DESC(crit_offset, |
| "Critical Temperature offset from tj max in millidegree Celsius."); |
| |
| /* IRQ 86 is a fixed APIC interrupt for BYT DTS Aux threshold notifications */ |
| #define BYT_SOC_DTS_APIC_IRQ 86 |
| |
| static int soc_dts_thres_gsi; |
| static int soc_dts_thres_irq; |
| static struct intel_soc_dts_sensors *soc_dts; |
| |
| static irqreturn_t soc_irq_thread_fn(int irq, void *dev_data) |
| { |
| pr_debug("proc_thermal_interrupt\n"); |
| intel_soc_dts_iosf_interrupt_handler(soc_dts); |
| |
| return IRQ_HANDLED; |
| } |
| |
| static const struct x86_cpu_id soc_thermal_ids[] = { |
| { X86_VENDOR_INTEL, 6, INTEL_FAM6_ATOM_SILVERMONT, 0, |
| BYT_SOC_DTS_APIC_IRQ}, |
| {} |
| }; |
| MODULE_DEVICE_TABLE(x86cpu, soc_thermal_ids); |
| |
| static int __init intel_soc_thermal_init(void) |
| { |
| int err = 0; |
| const struct x86_cpu_id *match_cpu; |
| |
| match_cpu = x86_match_cpu(soc_thermal_ids); |
| if (!match_cpu) |
| return -ENODEV; |
| |
| /* Create a zone with 2 trips with marked as read only */ |
| soc_dts = intel_soc_dts_iosf_init(INTEL_SOC_DTS_INTERRUPT_APIC, 2, 1); |
| if (IS_ERR(soc_dts)) { |
| err = PTR_ERR(soc_dts); |
| return err; |
| } |
| |
| soc_dts_thres_gsi = (int)match_cpu->driver_data; |
| if (soc_dts_thres_gsi) { |
| /* |
| * Note the flags here MUST match the firmware defaults, rather |
| * then the request_irq flags, otherwise we get an EBUSY error. |
| */ |
| soc_dts_thres_irq = acpi_register_gsi(NULL, soc_dts_thres_gsi, |
| ACPI_LEVEL_SENSITIVE, |
| ACPI_ACTIVE_LOW); |
| if (soc_dts_thres_irq < 0) { |
| pr_warn("intel_soc_dts: Could not get IRQ for GSI %d, err %d\n", |
| soc_dts_thres_gsi, soc_dts_thres_irq); |
| soc_dts_thres_irq = 0; |
| } |
| } |
| |
| if (soc_dts_thres_irq) { |
| err = request_threaded_irq(soc_dts_thres_irq, NULL, |
| soc_irq_thread_fn, |
| IRQF_TRIGGER_RISING | IRQF_ONESHOT, |
| "soc_dts", soc_dts); |
| if (err) { |
| /* |
| * Do not just error out because the user space thermal |
| * daemon such as DPTF may use polling instead of being |
| * interrupt driven. |
| */ |
| pr_warn("request_threaded_irq ret %d\n", err); |
| } |
| } |
| |
| err = intel_soc_dts_iosf_add_read_only_critical_trip(soc_dts, |
| crit_offset); |
| if (err) |
| goto error_trips; |
| |
| return 0; |
| |
| error_trips: |
| if (soc_dts_thres_irq) { |
| free_irq(soc_dts_thres_irq, soc_dts); |
| acpi_unregister_gsi(soc_dts_thres_gsi); |
| } |
| intel_soc_dts_iosf_exit(soc_dts); |
| |
| return err; |
| } |
| |
| static void __exit intel_soc_thermal_exit(void) |
| { |
| if (soc_dts_thres_irq) { |
| free_irq(soc_dts_thres_irq, soc_dts); |
| acpi_unregister_gsi(soc_dts_thres_gsi); |
| } |
| intel_soc_dts_iosf_exit(soc_dts); |
| } |
| |
| module_init(intel_soc_thermal_init) |
| module_exit(intel_soc_thermal_exit) |
| |
| MODULE_DESCRIPTION("Intel SoC DTS Thermal Driver"); |
| MODULE_AUTHOR("Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>"); |
| MODULE_LICENSE("GPL v2"); |