| /* | |
| * Blackfin On-Chip Real Time Clock Driver | |
| * Supports BF531/BF532/BF533/BF534/BF536/BF537 | |
| * | |
| * Copyright 2004-2007 Analog Devices Inc. | |
| * | |
| * Enter bugs at http://blackfin.uclinux.org/ | |
| * | |
| * Licensed under the GPL-2 or later. | |
| */ | |
| /* The biggest issue we deal with in this driver is that register writes are | |
| * synced to the RTC frequency of 1Hz. So if you write to a register and | |
| * attempt to write again before the first write has completed, the new write | |
| * is simply discarded. This can easily be troublesome if userspace disables | |
| * one event (say periodic) and then right after enables an event (say alarm). | |
| * Since all events are maintained in the same interrupt mask register, if | |
| * we wrote to it to disable the first event and then wrote to it again to | |
| * enable the second event, that second event would not be enabled as the | |
| * write would be discarded and things quickly fall apart. | |
| * | |
| * To keep this delay from significantly degrading performance (we, in theory, | |
| * would have to sleep for up to 1 second everytime we wanted to write a | |
| * register), we only check the write pending status before we start to issue | |
| * a new write. We bank on the idea that it doesnt matter when the sync | |
| * happens so long as we don't attempt another write before it does. The only | |
| * time userspace would take this penalty is when they try and do multiple | |
| * operations right after another ... but in this case, they need to take the | |
| * sync penalty, so we should be OK. | |
| * | |
| * Also note that the RTC_ISTAT register does not suffer this penalty; its | |
| * writes to clear status registers complete immediately. | |
| */ | |
| #include <linux/module.h> | |
| #include <linux/kernel.h> | |
| #include <linux/bcd.h> | |
| #include <linux/rtc.h> | |
| #include <linux/init.h> | |
| #include <linux/platform_device.h> | |
| #include <linux/seq_file.h> | |
| #include <linux/interrupt.h> | |
| #include <linux/spinlock.h> | |
| #include <linux/delay.h> | |
| #include <asm/blackfin.h> | |
| #define stamp(fmt, args...) pr_debug("%s:%i: " fmt "\n", __FUNCTION__, __LINE__, ## args) | |
| #define stampit() stamp("here i am") | |
| struct bfin_rtc { | |
| struct rtc_device *rtc_dev; | |
| struct rtc_time rtc_alarm; | |
| spinlock_t lock; | |
| }; | |
| /* Bit values for the ISTAT / ICTL registers */ | |
| #define RTC_ISTAT_WRITE_COMPLETE 0x8000 | |
| #define RTC_ISTAT_WRITE_PENDING 0x4000 | |
| #define RTC_ISTAT_ALARM_DAY 0x0040 | |
| #define RTC_ISTAT_24HR 0x0020 | |
| #define RTC_ISTAT_HOUR 0x0010 | |
| #define RTC_ISTAT_MIN 0x0008 | |
| #define RTC_ISTAT_SEC 0x0004 | |
| #define RTC_ISTAT_ALARM 0x0002 | |
| #define RTC_ISTAT_STOPWATCH 0x0001 | |
| /* Shift values for RTC_STAT register */ | |
| #define DAY_BITS_OFF 17 | |
| #define HOUR_BITS_OFF 12 | |
| #define MIN_BITS_OFF 6 | |
| #define SEC_BITS_OFF 0 | |
| /* Some helper functions to convert between the common RTC notion of time | |
| * and the internal Blackfin notion that is stored in 32bits. | |
| */ | |
| static inline u32 rtc_time_to_bfin(unsigned long now) | |
| { | |
| u32 sec = (now % 60); | |
| u32 min = (now % (60 * 60)) / 60; | |
| u32 hour = (now % (60 * 60 * 24)) / (60 * 60); | |
| u32 days = (now / (60 * 60 * 24)); | |
| return (sec << SEC_BITS_OFF) + | |
| (min << MIN_BITS_OFF) + | |
| (hour << HOUR_BITS_OFF) + | |
| (days << DAY_BITS_OFF); | |
| } | |
| static inline unsigned long rtc_bfin_to_time(u32 rtc_bfin) | |
| { | |
| return (((rtc_bfin >> SEC_BITS_OFF) & 0x003F)) + | |
| (((rtc_bfin >> MIN_BITS_OFF) & 0x003F) * 60) + | |
| (((rtc_bfin >> HOUR_BITS_OFF) & 0x001F) * 60 * 60) + | |
| (((rtc_bfin >> DAY_BITS_OFF) & 0x7FFF) * 60 * 60 * 24); | |
| } | |
| static inline void rtc_bfin_to_tm(u32 rtc_bfin, struct rtc_time *tm) | |
| { | |
| rtc_time_to_tm(rtc_bfin_to_time(rtc_bfin), tm); | |
| } | |
| /* Wait for the previous write to a RTC register to complete. | |
| * Unfortunately, we can't sleep here as that introduces a race condition when | |
| * turning on interrupt events. Consider this: | |
| * - process sets alarm | |
| * - process enables alarm | |
| * - process sleeps while waiting for rtc write to sync | |
| * - interrupt fires while process is sleeping | |
| * - interrupt acks the event by writing to ISTAT | |
| * - interrupt sets the WRITE PENDING bit | |
| * - interrupt handler finishes | |
| * - process wakes up, sees WRITE PENDING bit set, goes to sleep | |
| * - interrupt fires while process is sleeping | |
| * If anyone can point out the obvious solution here, i'm listening :). This | |
| * shouldn't be an issue on an SMP or preempt system as this function should | |
| * only be called with the rtc lock held. | |
| */ | |
| static void rtc_bfin_sync_pending(void) | |
| { | |
| stampit(); | |
| while (!(bfin_read_RTC_ISTAT() & RTC_ISTAT_WRITE_COMPLETE)) { | |
| if (!(bfin_read_RTC_ISTAT() & RTC_ISTAT_WRITE_PENDING)) | |
| break; | |
| } | |
| bfin_write_RTC_ISTAT(RTC_ISTAT_WRITE_COMPLETE); | |
| } | |
| static void rtc_bfin_reset(struct bfin_rtc *rtc) | |
| { | |
| /* Initialize the RTC. Enable pre-scaler to scale RTC clock | |
| * to 1Hz and clear interrupt/status registers. */ | |
| spin_lock_irq(&rtc->lock); | |
| rtc_bfin_sync_pending(); | |
| bfin_write_RTC_PREN(0x1); | |
| bfin_write_RTC_ICTL(0); | |
| bfin_write_RTC_SWCNT(0); | |
| bfin_write_RTC_ALARM(0); | |
| bfin_write_RTC_ISTAT(0xFFFF); | |
| spin_unlock_irq(&rtc->lock); | |
| } | |
| static irqreturn_t bfin_rtc_interrupt(int irq, void *dev_id) | |
| { | |
| struct platform_device *pdev = to_platform_device(dev_id); | |
| struct bfin_rtc *rtc = platform_get_drvdata(pdev); | |
| unsigned long events = 0; | |
| u16 rtc_istat; | |
| stampit(); | |
| spin_lock_irq(&rtc->lock); | |
| rtc_istat = bfin_read_RTC_ISTAT(); | |
| if (rtc_istat & (RTC_ISTAT_ALARM | RTC_ISTAT_ALARM_DAY)) { | |
| bfin_write_RTC_ISTAT(RTC_ISTAT_ALARM | RTC_ISTAT_ALARM_DAY); | |
| events |= RTC_AF | RTC_IRQF; | |
| } | |
| if (rtc_istat & RTC_ISTAT_STOPWATCH) { | |
| bfin_write_RTC_ISTAT(RTC_ISTAT_STOPWATCH); | |
| events |= RTC_PF | RTC_IRQF; | |
| bfin_write_RTC_SWCNT(rtc->rtc_dev->irq_freq); | |
| } | |
| if (rtc_istat & RTC_ISTAT_SEC) { | |
| bfin_write_RTC_ISTAT(RTC_ISTAT_SEC); | |
| events |= RTC_UF | RTC_IRQF; | |
| } | |
| rtc_update_irq(rtc->rtc_dev, 1, events); | |
| spin_unlock_irq(&rtc->lock); | |
| return IRQ_HANDLED; | |
| } | |
| static int bfin_rtc_open(struct device *dev) | |
| { | |
| struct bfin_rtc *rtc = dev_get_drvdata(dev); | |
| int ret; | |
| stampit(); | |
| ret = request_irq(IRQ_RTC, bfin_rtc_interrupt, IRQF_DISABLED, "rtc-bfin", dev); | |
| if (unlikely(ret)) { | |
| dev_err(dev, "request RTC IRQ failed with %d\n", ret); | |
| return ret; | |
| } | |
| rtc_bfin_reset(rtc); | |
| return ret; | |
| } | |
| static void bfin_rtc_release(struct device *dev) | |
| { | |
| struct bfin_rtc *rtc = dev_get_drvdata(dev); | |
| stampit(); | |
| rtc_bfin_reset(rtc); | |
| free_irq(IRQ_RTC, dev); | |
| } | |
| static int bfin_rtc_ioctl(struct device *dev, unsigned int cmd, unsigned long arg) | |
| { | |
| struct bfin_rtc *rtc = dev_get_drvdata(dev); | |
| stampit(); | |
| switch (cmd) { | |
| case RTC_PIE_ON: | |
| stampit(); | |
| spin_lock_irq(&rtc->lock); | |
| rtc_bfin_sync_pending(); | |
| bfin_write_RTC_ISTAT(RTC_ISTAT_STOPWATCH); | |
| bfin_write_RTC_SWCNT(rtc->rtc_dev->irq_freq); | |
| bfin_write_RTC_ICTL(bfin_read_RTC_ICTL() | RTC_ISTAT_STOPWATCH); | |
| spin_unlock_irq(&rtc->lock); | |
| return 0; | |
| case RTC_PIE_OFF: | |
| stampit(); | |
| spin_lock_irq(&rtc->lock); | |
| rtc_bfin_sync_pending(); | |
| bfin_write_RTC_SWCNT(0); | |
| bfin_write_RTC_ICTL(bfin_read_RTC_ICTL() & ~RTC_ISTAT_STOPWATCH); | |
| spin_unlock_irq(&rtc->lock); | |
| return 0; | |
| case RTC_UIE_ON: | |
| stampit(); | |
| spin_lock_irq(&rtc->lock); | |
| rtc_bfin_sync_pending(); | |
| bfin_write_RTC_ISTAT(RTC_ISTAT_SEC); | |
| bfin_write_RTC_ICTL(bfin_read_RTC_ICTL() | RTC_ISTAT_SEC); | |
| spin_unlock_irq(&rtc->lock); | |
| return 0; | |
| case RTC_UIE_OFF: | |
| stampit(); | |
| spin_lock_irq(&rtc->lock); | |
| rtc_bfin_sync_pending(); | |
| bfin_write_RTC_ICTL(bfin_read_RTC_ICTL() & ~RTC_ISTAT_SEC); | |
| spin_unlock_irq(&rtc->lock); | |
| return 0; | |
| case RTC_AIE_ON: { | |
| unsigned long rtc_alarm; | |
| u16 which_alarm; | |
| int ret = 0; | |
| stampit(); | |
| spin_lock_irq(&rtc->lock); | |
| rtc_bfin_sync_pending(); | |
| if (rtc->rtc_alarm.tm_yday == -1) { | |
| struct rtc_time now; | |
| rtc_bfin_to_tm(bfin_read_RTC_STAT(), &now); | |
| now.tm_sec = rtc->rtc_alarm.tm_sec; | |
| now.tm_min = rtc->rtc_alarm.tm_min; | |
| now.tm_hour = rtc->rtc_alarm.tm_hour; | |
| ret = rtc_tm_to_time(&now, &rtc_alarm); | |
| which_alarm = RTC_ISTAT_ALARM; | |
| } else { | |
| ret = rtc_tm_to_time(&rtc->rtc_alarm, &rtc_alarm); | |
| which_alarm = RTC_ISTAT_ALARM_DAY; | |
| } | |
| if (ret == 0) { | |
| bfin_write_RTC_ISTAT(which_alarm); | |
| bfin_write_RTC_ALARM(rtc_time_to_bfin(rtc_alarm)); | |
| bfin_write_RTC_ICTL(bfin_read_RTC_ICTL() | which_alarm); | |
| } | |
| spin_unlock_irq(&rtc->lock); | |
| return ret; | |
| } | |
| case RTC_AIE_OFF: | |
| stampit(); | |
| spin_lock_irq(&rtc->lock); | |
| rtc_bfin_sync_pending(); | |
| bfin_write_RTC_ICTL(bfin_read_RTC_ICTL() & ~(RTC_ISTAT_ALARM | RTC_ISTAT_ALARM_DAY)); | |
| spin_unlock_irq(&rtc->lock); | |
| return 0; | |
| } | |
| return -ENOIOCTLCMD; | |
| } | |
| static int bfin_rtc_read_time(struct device *dev, struct rtc_time *tm) | |
| { | |
| struct bfin_rtc *rtc = dev_get_drvdata(dev); | |
| stampit(); | |
| spin_lock_irq(&rtc->lock); | |
| rtc_bfin_sync_pending(); | |
| rtc_bfin_to_tm(bfin_read_RTC_STAT(), tm); | |
| spin_unlock_irq(&rtc->lock); | |
| return 0; | |
| } | |
| static int bfin_rtc_set_time(struct device *dev, struct rtc_time *tm) | |
| { | |
| struct bfin_rtc *rtc = dev_get_drvdata(dev); | |
| int ret; | |
| unsigned long now; | |
| stampit(); | |
| spin_lock_irq(&rtc->lock); | |
| ret = rtc_tm_to_time(tm, &now); | |
| if (ret == 0) { | |
| rtc_bfin_sync_pending(); | |
| bfin_write_RTC_STAT(rtc_time_to_bfin(now)); | |
| } | |
| spin_unlock_irq(&rtc->lock); | |
| return ret; | |
| } | |
| static int bfin_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alrm) | |
| { | |
| struct bfin_rtc *rtc = dev_get_drvdata(dev); | |
| stampit(); | |
| memcpy(&alrm->time, &rtc->rtc_alarm, sizeof(struct rtc_time)); | |
| alrm->pending = !!(bfin_read_RTC_ICTL() & (RTC_ISTAT_ALARM | RTC_ISTAT_ALARM_DAY)); | |
| return 0; | |
| } | |
| static int bfin_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alrm) | |
| { | |
| struct bfin_rtc *rtc = dev_get_drvdata(dev); | |
| stampit(); | |
| memcpy(&rtc->rtc_alarm, &alrm->time, sizeof(struct rtc_time)); | |
| return 0; | |
| } | |
| static int bfin_rtc_proc(struct device *dev, struct seq_file *seq) | |
| { | |
| #define yesno(x) (x ? "yes" : "no") | |
| u16 ictl = bfin_read_RTC_ICTL(); | |
| stampit(); | |
| seq_printf(seq, "alarm_IRQ\t: %s\n", yesno(ictl & RTC_ISTAT_ALARM)); | |
| seq_printf(seq, "wkalarm_IRQ\t: %s\n", yesno(ictl & RTC_ISTAT_ALARM_DAY)); | |
| seq_printf(seq, "seconds_IRQ\t: %s\n", yesno(ictl & RTC_ISTAT_SEC)); | |
| seq_printf(seq, "periodic_IRQ\t: %s\n", yesno(ictl & RTC_ISTAT_STOPWATCH)); | |
| #ifdef DEBUG | |
| seq_printf(seq, "RTC_STAT\t: 0x%08X\n", bfin_read_RTC_STAT()); | |
| seq_printf(seq, "RTC_ICTL\t: 0x%04X\n", bfin_read_RTC_ICTL()); | |
| seq_printf(seq, "RTC_ISTAT\t: 0x%04X\n", bfin_read_RTC_ISTAT()); | |
| seq_printf(seq, "RTC_SWCNT\t: 0x%04X\n", bfin_read_RTC_SWCNT()); | |
| seq_printf(seq, "RTC_ALARM\t: 0x%08X\n", bfin_read_RTC_ALARM()); | |
| seq_printf(seq, "RTC_PREN\t: 0x%04X\n", bfin_read_RTC_PREN()); | |
| #endif | |
| return 0; | |
| } | |
| static int bfin_irq_set_freq(struct device *dev, int freq) | |
| { | |
| struct bfin_rtc *rtc = dev_get_drvdata(dev); | |
| stampit(); | |
| rtc->rtc_dev->irq_freq = freq; | |
| return 0; | |
| } | |
| static struct rtc_class_ops bfin_rtc_ops = { | |
| .open = bfin_rtc_open, | |
| .release = bfin_rtc_release, | |
| .ioctl = bfin_rtc_ioctl, | |
| .read_time = bfin_rtc_read_time, | |
| .set_time = bfin_rtc_set_time, | |
| .read_alarm = bfin_rtc_read_alarm, | |
| .set_alarm = bfin_rtc_set_alarm, | |
| .proc = bfin_rtc_proc, | |
| .irq_set_freq = bfin_irq_set_freq, | |
| }; | |
| static int __devinit bfin_rtc_probe(struct platform_device *pdev) | |
| { | |
| struct bfin_rtc *rtc; | |
| int ret = 0; | |
| stampit(); | |
| rtc = kzalloc(sizeof(*rtc), GFP_KERNEL); | |
| if (unlikely(!rtc)) | |
| return -ENOMEM; | |
| spin_lock_init(&rtc->lock); | |
| rtc->rtc_dev = rtc_device_register(pdev->name, &pdev->dev, &bfin_rtc_ops, THIS_MODULE); | |
| if (unlikely(IS_ERR(rtc))) { | |
| ret = PTR_ERR(rtc->rtc_dev); | |
| goto err; | |
| } | |
| rtc->rtc_dev->irq_freq = 0; | |
| rtc->rtc_dev->max_user_freq = (2 << 16); /* stopwatch is an unsigned 16 bit reg */ | |
| platform_set_drvdata(pdev, rtc); | |
| return 0; | |
| err: | |
| kfree(rtc); | |
| return ret; | |
| } | |
| static int __devexit bfin_rtc_remove(struct platform_device *pdev) | |
| { | |
| struct bfin_rtc *rtc = platform_get_drvdata(pdev); | |
| rtc_device_unregister(rtc->rtc_dev); | |
| platform_set_drvdata(pdev, NULL); | |
| kfree(rtc); | |
| return 0; | |
| } | |
| static struct platform_driver bfin_rtc_driver = { | |
| .driver = { | |
| .name = "rtc-bfin", | |
| .owner = THIS_MODULE, | |
| }, | |
| .probe = bfin_rtc_probe, | |
| .remove = __devexit_p(bfin_rtc_remove), | |
| }; | |
| static int __init bfin_rtc_init(void) | |
| { | |
| stampit(); | |
| return platform_driver_register(&bfin_rtc_driver); | |
| } | |
| static void __exit bfin_rtc_exit(void) | |
| { | |
| platform_driver_unregister(&bfin_rtc_driver); | |
| } | |
| module_init(bfin_rtc_init); | |
| module_exit(bfin_rtc_exit); | |
| MODULE_DESCRIPTION("Blackfin On-Chip Real Time Clock Driver"); | |
| MODULE_AUTHOR("Mike Frysinger <vapier@gentoo.org>"); | |
| MODULE_LICENSE("GPL"); |