| /* | |
| * sbpcd.c CD-ROM device driver for the whole family of traditional, | |
| * non-ATAPI IDE-style Matsushita/Panasonic CR-5xx drives. | |
| * Works with SoundBlaster compatible cards and with "no-sound" | |
| * interface cards like Lasermate, Panasonic CI-101P, Teac, ... | |
| * Also for the Longshine LCS-7260 drive. | |
| * Also for the IBM "External ISA CD-Rom" drive. | |
| * Also for the CreativeLabs CD200 drive. | |
| * Also for the TEAC CD-55A drive. | |
| * Also for the ECS-AT "Vertos 100" drive. | |
| * Not for Sanyo drives (but for the H94A, sjcd is there...). | |
| * Not for any other Funai drives than the CD200 types (sometimes | |
| * labelled E2550UA or MK4015 or 2800F). | |
| */ | |
| #define VERSION "v4.63 Andrew J. Kroll <ag784@freenet.buffalo.edu> Wed Jul 26 04:24:10 EDT 2000" | |
| /* Copyright (C) 1993, 1994, 1995 Eberhard Moenkeberg <emoenke@gwdg.de> | |
| * | |
| * This program is free software; you can redistribute it and/or modify | |
| * it under the terms of the GNU General Public License as published by | |
| * the Free Software Foundation; either version 2, or (at your option) | |
| * any later version. | |
| * | |
| * You should have received a copy of the GNU General Public License | |
| * (for example /usr/src/linux/COPYING); if not, write to the Free | |
| * Software Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. | |
| * | |
| * If you change this software, you should mail a .diff file with some | |
| * description lines to emoenke@gwdg.de. I want to know about it. | |
| * | |
| * If you are the editor of a Linux CD, you should enable sbpcd.c within | |
| * your boot floppy kernel and send me one of your CDs for free. | |
| * | |
| * If you would like to port the driver to an other operating system (f.e. | |
| * FreeBSD or NetBSD) or use it as an information source, you shall not be | |
| * restricted by the GPL under the following conditions: | |
| * a) the source code of your work is freely available | |
| * b) my part of the work gets mentioned at all places where your | |
| * authorship gets mentioned | |
| * c) I receive a copy of your code together with a full installation | |
| * package of your operating system for free. | |
| * | |
| * | |
| * VERSION HISTORY | |
| * | |
| * 0.1 initial release, April/May 93, after mcd.c (Martin Harriss) | |
| * | |
| * 0.2 thek "repeat:"-loop in do_sbpcd_request did not check for | |
| * end-of-request_queue (resulting in kernel panic). | |
| * Flow control seems stable, but throughput is not better. | |
| * | |
| * 0.3 interrupt locking totally eliminated (maybe "inb" and "outb" | |
| * are still locking) - 0.2 made keyboard-type-ahead losses. | |
| * check_sbpcd_media_change added (to use by isofs/inode.c) | |
| * - but it detects almost nothing. | |
| * | |
| * 0.4 use MAJOR 25 definitely. | |
| * Almost total re-design to support double-speed drives and | |
| * "naked" (no sound) interface cards ("LaserMate" interface type). | |
| * Flow control should be exact now. | |
| * Don't occupy the SbPro IRQ line (not needed either); will | |
| * live together with Hannu Savolainen's sndkit now. | |
| * Speeded up data transfer to 150 kB/sec, with help from Kai | |
| * Makisara, the "provider" of the "mt" tape utility. | |
| * Give "SpinUp" command if necessary. | |
| * First steps to support up to 4 drives (but currently only one). | |
| * Implemented audio capabilities - workman should work, xcdplayer | |
| * gives some problems. | |
| * This version is still consuming too much CPU time, and | |
| * sleeping still has to be worked on. | |
| * During "long" implied seeks, it seems possible that a | |
| * ReadStatus command gets ignored. That gives the message | |
| * "ResponseStatus timed out" (happens about 6 times here during | |
| * a "ls -alR" of the YGGDRASIL LGX-Beta CD). Such a case is | |
| * handled without data error, but it should get done better. | |
| * | |
| * 0.5 Free CPU during waits (again with help from Kai Makisara). | |
| * Made it work together with the LILO/kernel setup standard. | |
| * Included auto-probing code, as suggested by YGGDRASIL. | |
| * Formal redesign to add DDI debugging. | |
| * There are still flaws in IOCTL (workman with double speed drive). | |
| * | |
| * 1.0 Added support for all drive IDs (0...3, no longer only 0) | |
| * and up to 4 drives on one controller. | |
| * Added "#define MANY_SESSION" for "old" multi session CDs. | |
| * | |
| * 1.1 Do SpinUp for new drives, too. | |
| * Revised for clean compile under "old" kernels (0.99pl9). | |
| * | |
| * 1.2 Found the "workman with double-speed drive" bug: use the driver's | |
| * audio_state, not what the drive is reporting with ReadSubQ. | |
| * | |
| * 1.3 Minor cleanups. | |
| * Refinements regarding Workman. | |
| * | |
| * 1.4 Read XA disks (PhotoCDs) with "old" drives, too (but only the first | |
| * session - no chance to fully access a "multi-session" CD). | |
| * This currently still is too slow (50 kB/sec) - but possibly | |
| * the old drives won't do it faster. | |
| * Implemented "door (un)lock" for new drives (still does not work | |
| * as wanted - no lock possible after an unlock). | |
| * Added some debugging printout for the UPC/EAN code - but my drives | |
| * return only zeroes. Is there no UPC/EAN code written? | |
| * | |
| * 1.5 Laborate with UPC/EAN code (not better yet). | |
| * Adapt to kernel 1.1.8 change (have to explicitly include | |
| * <linux/string.h> now). | |
| * | |
| * 1.6 Trying to read audio frames as data. Impossible with the current | |
| * drive firmware levels, as it seems. Awaiting any hint. ;-) | |
| * Changed "door unlock": repeat it until success. | |
| * Changed CDROMSTOP routine (stop somewhat "softer" so that Workman | |
| * won't get confused). | |
| * Added a third interface type: Sequoia S-1000, as used with the SPEA | |
| * Media FX sound card. This interface (usable for Sony and Mitsumi | |
| * drives, too) needs a special configuration setup and behaves like a | |
| * LaserMate type after that. Still experimental - I do not have such | |
| * an interface. | |
| * Use the "variable BLOCK_SIZE" feature (2048). But it does only work | |
| * if you give the mount option "block=2048". | |
| * The media_check routine is currently disabled; now that it gets | |
| * called as it should I fear it must get synchronized for not to | |
| * disturb the normal driver's activity. | |
| * | |
| * 2.0 Version number bumped - two reasons: | |
| * - reading audio tracks as data works now with CR-562 and CR-563. We | |
| * currently do it by an IOCTL (yet has to get standardized), one frame | |
| * at a time; that is pretty slow. But it works. | |
| * - we are maintaining now up to 4 interfaces (each up to 4 drives): | |
| * did it the easy way - a different MAJOR (25, 26, ...) and a different | |
| * copy of the driver (sbpcd.c, sbpcd2.c, sbpcd3.c, sbpcd4.c - only | |
| * distinguished by the value of SBPCD_ISSUE and the driver's name), | |
| * and a common sbpcd.h file. | |
| * Bettered the "ReadCapacity error" problem with old CR-52x drives (the | |
| * drives sometimes need a manual "eject/insert" before work): just | |
| * reset the drive and do again. Needs lots of resets here and sometimes | |
| * that does not cure, so this can't be the solution. | |
| * | |
| * 2.1 Found bug with multisession CDs (accessing frame 16). | |
| * "read audio" works now with address type CDROM_MSF, too. | |
| * Bigger audio frame buffer: allows reading max. 4 frames at time; this | |
| * gives a significant speedup, but reading more than one frame at once | |
| * gives missing chunks at each single frame boundary. | |
| * | |
| * 2.2 Kernel interface cleanups: timers, init, setup, media check. | |
| * | |
| * 2.3 Let "door lock" and "eject" live together. | |
| * Implemented "close tray" (done automatically during open). | |
| * | |
| * 2.4 Use different names for device registering. | |
| * | |
| * 2.5 Added "#if EJECT" code (default: enabled) to automatically eject | |
| * the tray during last call to "sbpcd_release". | |
| * Added "#if JUKEBOX" code (default: disabled) to automatically eject | |
| * the tray during call to "sbpcd_open" if no disk is in. | |
| * Turn on the CD volume of "compatible" sound cards, too; just define | |
| * SOUND_BASE (in sbpcd.h) accordingly (default: disabled). | |
| * | |
| * 2.6 Nothing new. | |
| * | |
| * 2.7 Added CDROMEJECT_SW ioctl to set the "EJECT" behavior on the fly: | |
| * 0 disables, 1 enables auto-ejecting. Useful to keep the tray in | |
| * during shutdown. | |
| * | |
| * 2.8 Added first support (still BETA, I need feedback or a drive) for | |
| * the Longshine LCS-7260 drives. They appear as double-speed drives | |
| * using the "old" command scheme, extended by tray control and door | |
| * lock functions. | |
| * Found (and fixed preliminary) a flaw with some multisession CDs: we | |
| * have to re-direct not only the accesses to frame 16 (the isofs | |
| * routines drive it up to max. 100), but also those to the continuation | |
| * (repetition) frames (as far as they exist - currently set fix as | |
| * 16..20). | |
| * Changed default of the "JUKEBOX" define. If you use this default, | |
| * your tray will eject if you try to mount without a disk in. Next | |
| * mount command will insert the tray - so, just fill in a disk. ;-) | |
| * | |
| * 2.9 Fulfilled the Longshine LCS-7260 support; with great help and | |
| * experiments by Serge Robyns. | |
| * First attempts to support the TEAC CD-55A drives; but still not | |
| * usable yet. | |
| * Implemented the CDROMMULTISESSION ioctl; this is an attempt to handle | |
| * multi session CDs more "transparent" (redirection handling has to be | |
| * done within the isofs routines, and only for the special purpose of | |
| * obtaining the "right" volume descriptor; accesses to the raw device | |
| * should not get redirected). | |
| * | |
| * 3.0 Just a "normal" increment, with some provisions to do it better. ;-) | |
| * Introduced "#define READ_AUDIO" to specify the maximum number of | |
| * audio frames to grab with one request. This defines a buffer size | |
| * within kernel space; a value of 0 will reserve no such space and | |
| * disable the CDROMREADAUDIO ioctl. A value of 75 enables the reading | |
| * of a whole second with one command, but will use a buffer of more | |
| * than 172 kB. | |
| * Started CD200 support. Drive detection should work, but nothing | |
| * more. | |
| * | |
| * 3.1 Working to support the CD200 and the Teac CD-55A drives. | |
| * AT-BUS style device numbering no longer used: use SCSI style now. | |
| * So, the first "found" device has MINOR 0, regardless of the | |
| * jumpered drive ID. This implies modifications to the /dev/sbpcd* | |
| * entries for some people, but will help the DAU (german TLA, english: | |
| * "newbie", maybe ;-) to install his "first" system from a CD. | |
| * | |
| * 3.2 Still testing with CD200 and CD-55A drives. | |
| * | |
| * 3.3 Working with CD200 support. | |
| * | |
| * 3.4 Auto-probing stops if an address of 0 is seen (to be entered with | |
| * the kernel command line). | |
| * Made the driver "loadable". If used as a module, "audio copy" is | |
| * disabled, and the internal read ahead data buffer has a reduced size | |
| * of 4 kB; so, throughput may be reduced a little bit with slow CPUs. | |
| * | |
| * 3.5 Provisions to handle weird photoCDs which have an interrupted | |
| * "formatting" immediately after the last frames of some files: simply | |
| * never "read ahead" with MultiSession CDs. By this, CPU usage may be | |
| * increased with those CDs, and there may be a loss in speed. | |
| * Re-structured the messaging system. | |
| * The "loadable" version no longer has a limited READ_AUDIO buffer | |
| * size. | |
| * Removed "MANY_SESSION" handling for "old" multi session CDs. | |
| * Added "private" IOCTLs CDROMRESET and CDROMVOLREAD. | |
| * Started again to support the TEAC CD-55A drives, now that I found | |
| * the money for "my own" drive. ;-) | |
| * The TEAC CD-55A support is fairly working now. | |
| * I have measured that the drive "delivers" at 600 kB/sec (even with | |
| * bigger requests than the drive's 64 kB buffer can satisfy), but | |
| * the "real" rate does not exceed 520 kB/sec at the moment. | |
| * Caused by the various changes to build in TEAC support, the timed | |
| * loops are de-optimized at the moment (less throughput with CR-52x | |
| * drives, and the TEAC will give speed only with SBP_BUFFER_FRAMES 64). | |
| * | |
| * 3.6 Fixed TEAC data read problems with SbPro interfaces. | |
| * Initial size of the READ_AUDIO buffer is 0. Can get set to any size | |
| * during runtime. | |
| * | |
| * 3.7 Introduced MAX_DRIVES for some poor interface cards (seen with TEAC | |
| * drives) which allow only one drive (ID 0); this avoids repetitive | |
| * detection under IDs 1..3. | |
| * Elongated cmd_out_T response waiting; necessary for photo CDs with | |
| * a lot of sessions. | |
| * Bettered the sbpcd_open() behavior with TEAC drives. | |
| * | |
| * 3.8 Elongated max_latency for CR-56x drives. | |
| * | |
| * 3.9 Finally fixed the long-known SoundScape/SPEA/Sequoia S-1000 interface | |
| * configuration bug. | |
| * Now Corey, Heiko, Ken, Leo, Vadim/Eric & Werner are invited to copy | |
| * the config_spea() routine into their drivers. ;-) | |
| * | |
| * 4.0 No "big step" - normal version increment. | |
| * Adapted the benefits from 1.3.33. | |
| * Fiddled with CDROMREADAUDIO flaws. | |
| * Avoid ReadCapacity command with CD200 drives (the MKE 1.01 version | |
| * seems not to support it). | |
| * Fulfilled "read audio" for CD200 drives, with help of Pete Heist | |
| * (heistp@rpi.edu). | |
| * | |
| * 4.1 Use loglevel KERN_INFO with printk(). | |
| * Added support for "Vertos 100" drive ("ECS-AT") - it is very similar | |
| * to the Longshine LCS-7260. Give feedback if you can - I never saw | |
| * such a drive, and I have no specs. | |
| * | |
| * 4.2 Support for Teac 16-bit interface cards. Can't get auto-detected, | |
| * so you have to jumper your card to 0x2C0. Still not 100% - come | |
| * in contact if you can give qualified feedback. | |
| * Use loglevel KERN_NOTICE with printk(). If you get annoyed by a | |
| * flood of unwanted messages and the accompanied delay, try to read | |
| * my documentation. Especially the Linux CDROM drivers have to do an | |
| * important job for the newcomers, so the "distributed" version has | |
| * to fit some special needs. Since generations, the flood of messages | |
| * is user-configurable (even at runtime), but to get aware of this, one | |
| * needs a special mental quality: the ability to read. | |
| * | |
| * 4.3 CD200F does not like to receive a command while the drive is | |
| * reading the ToC; still trying to solve it. | |
| * Removed some redundant verify_area calls (yes, Heiko Eissfeldt | |
| * is visiting all the Linux CDROM drivers ;-). | |
| * | |
| * 4.4 Adapted one idea from tiensivu@pilot.msu.edu's "stripping-down" | |
| * experiments: "KLOGD_PAUSE". | |
| * Inhibited "play audio" attempts with data CDs. Provisions for a | |
| * "data-safe" handling of "mixed" (data plus audio) Cds. | |
| * | |
| * 4.5 Meanwhile Gonzalo Tornaria <tornaria@cmat.edu.uy> (GTL) built a | |
| * special end_request routine: we seem to have to take care for not | |
| * to have two processes working at the request list. My understanding | |
| * was and is that ll_rw_blk should not call do_sbpcd_request as long | |
| * as there is still one call active (the first call will care for all | |
| * outstanding I/Os, and if a second call happens, that is a bug in | |
| * ll_rw_blk.c). | |
| * "Check media change" without touching any drive. | |
| * | |
| * 4.6 Use a semaphore to synchronize multi-activity; elaborated by Rob | |
| * Riggs <rriggs@tesser.com>. At the moment, we simply block "read" | |
| * against "ioctl" and vice versa. This could be refined further, but | |
| * I guess with almost no performance increase. | |
| * Experiments to speed up the CD-55A; again with help of Rob Riggs | |
| * (to be true, he gave both, idea & code. ;-) | |
| * | |
| * 4.61 Ported to Uniform CD-ROM driver by | |
| * Heiko Eissfeldt <heiko@colossus.escape.de> with additional | |
| * changes by Erik Andersen <andersee@debian.org> | |
| * | |
| * 4.62 Fix a bug where playing audio left the drive in an unusable state. | |
| * Heiko Eissfeldt <heiko@colossus.escape.de> | |
| * | |
| * November 1999 -- Make kernel-parameter implementation work with 2.3.x | |
| * Removed init_module & cleanup_module in favor of | |
| * module_init & module_exit. | |
| * Torben Mathiasen <tmm@image.dk> | |
| * | |
| * 4.63 Bug fixes for audio annoyances, new legacy CDROM maintainer. | |
| * Annoying things fixed: | |
| * TOC reread on automated disk changes | |
| * TOC reread on manual cd changes | |
| * Play IOCTL tries to play CD before it's actually ready... sometimes. | |
| * CD_AUDIO_COMPLETED state so workman (and other playes) can repeat play. | |
| * Andrew J. Kroll <ag784@freenet.buffalo.edu> Wed Jul 26 04:24:10 EDT 2000 | |
| * | |
| * 4.64 Fix module parameters - were being completely ignored. | |
| * Can also specify max_drives=N as a setup int to get rid of | |
| * "ghost" drives on crap hardware (aren't they all?) Paul Gortmaker | |
| * | |
| * TODO | |
| * implement "read all subchannel data" (96 bytes per frame) | |
| * remove alot of the virtual status bits and deal with hardware status | |
| * move the change of cd for audio to a better place | |
| * add debug levels to insmod parameters (trivial) | |
| * | |
| * special thanks to Kai Makisara (kai.makisara@vtt.fi) for his fine | |
| * elaborated speed-up experiments (and the fabulous results!), for | |
| * the "push" towards load-free wait loops, and for the extensive mail | |
| * thread which brought additional hints and bug fixes. | |
| * | |
| */ | |
| /* | |
| * Trying to merge requests breaks this driver horribly (as in it goes | |
| * boom and apparently has done so since 2.3.41). As it is a legacy | |
| * driver for a horribly slow double speed CD on a hideous interface | |
| * designed for polled operation, I won't lose any sleep in simply | |
| * disallowing merging. Paul G. 02/2001 | |
| * | |
| * Thu May 30 14:14:47 CEST 2002: | |
| * | |
| * I have presumably found the reson for the above - there was a bogous | |
| * end_request substitute, which was manipulating the request queues | |
| * incorrectly. If someone has access to the actual hardware, and it's | |
| * still operations - well please free to test it. | |
| * | |
| * Marcin Dalecki | |
| */ | |
| /* | |
| * Add bio/kdev_t changes for 2.5.x required to make it work again. | |
| * Still room for improvement in the request handling here if anyone | |
| * actually cares. Bring your own chainsaw. Paul G. 02/2002 | |
| */ | |
| #include <linux/module.h> | |
| #include <linux/errno.h> | |
| #include <linux/sched.h> | |
| #include <linux/mm.h> | |
| #include <linux/timer.h> | |
| #include <linux/fs.h> | |
| #include <linux/kernel.h> | |
| #include <linux/cdrom.h> | |
| #include <linux/ioport.h> | |
| #include <linux/major.h> | |
| #include <linux/string.h> | |
| #include <linux/vmalloc.h> | |
| #include <linux/init.h> | |
| #include <linux/interrupt.h> | |
| #include <asm/system.h> | |
| #include <asm/io.h> | |
| #include <asm/uaccess.h> | |
| #include <stdarg.h> | |
| #include "sbpcd.h" | |
| #define MAJOR_NR MATSUSHITA_CDROM_MAJOR | |
| #include <linux/blkdev.h> | |
| /*==========================================================================*/ | |
| #if SBPCD_DIS_IRQ | |
| # define SBPCD_CLI cli() | |
| # define SBPCD_STI sti() | |
| #else | |
| # define SBPCD_CLI | |
| # define SBPCD_STI | |
| #endif | |
| /*==========================================================================*/ | |
| /* | |
| * auto-probing address list | |
| * inspired by Adam J. Richter from Yggdrasil | |
| * | |
| * still not good enough - can cause a hang. | |
| * example: a NE 2000 ethernet card at 300 will cause a hang probing 310. | |
| * if that happens, reboot and use the LILO (kernel) command line. | |
| * The possibly conflicting ethernet card addresses get NOT probed | |
| * by default - to minimize the hang possibilities. | |
| * | |
| * The SB Pro addresses get "mirrored" at 0x6xx and some more locations - to | |
| * avoid a type error, the 0x2xx-addresses must get checked before 0x6xx. | |
| * | |
| * send mail to emoenke@gwdg.de if your interface card is not FULLY | |
| * represented here. | |
| */ | |
| static int sbpcd[] = | |
| { | |
| CDROM_PORT, SBPRO, /* probe with user's setup first */ | |
| #if DISTRIBUTION | |
| 0x230, 1, /* Soundblaster Pro and 16 (default) */ | |
| #if 0 | |
| 0x300, 0, /* CI-101P (default), WDH-7001C (default), | |
| Galaxy (default), Reveal (one default) */ | |
| 0x250, 1, /* OmniCD default, Soundblaster Pro and 16 */ | |
| 0x2C0, 3, /* Teac 16-bit cards */ | |
| 0x260, 1, /* OmniCD */ | |
| 0x320, 0, /* Lasermate, CI-101P, WDH-7001C, Galaxy, Reveal (other default), | |
| Longshine LCS-6853 (default) */ | |
| 0x338, 0, /* Reveal Sound Wave 32 card model #SC600 */ | |
| 0x340, 0, /* Mozart sound card (default), Lasermate, CI-101P */ | |
| 0x360, 0, /* Lasermate, CI-101P */ | |
| 0x270, 1, /* Soundblaster 16 */ | |
| 0x670, 0, /* "sound card #9" */ | |
| 0x690, 0, /* "sound card #9" */ | |
| 0x338, 2, /* SPEA Media FX, Ensonic SoundScape (default) */ | |
| 0x328, 2, /* SPEA Media FX */ | |
| 0x348, 2, /* SPEA Media FX */ | |
| 0x634, 0, /* some newer sound cards */ | |
| 0x638, 0, /* some newer sound cards */ | |
| 0x230, 1, /* some newer sound cards */ | |
| /* due to incomplete address decoding of the SbPro card, these must be last */ | |
| 0x630, 0, /* "sound card #9" (default) */ | |
| 0x650, 0, /* "sound card #9" */ | |
| #ifdef MODULE | |
| /* | |
| * some "hazardous" locations (no harm with the loadable version) | |
| * (will stop the bus if a NE2000 ethernet card resides at offset -0x10) | |
| */ | |
| 0x330, 0, /* Lasermate, CI-101P, WDH-7001C */ | |
| 0x350, 0, /* Lasermate, CI-101P */ | |
| 0x358, 2, /* SPEA Media FX */ | |
| 0x370, 0, /* Lasermate, CI-101P */ | |
| 0x290, 1, /* Soundblaster 16 */ | |
| 0x310, 0, /* Lasermate, CI-101P, WDH-7001C */ | |
| #endif /* MODULE */ | |
| #endif | |
| #endif /* DISTRIBUTION */ | |
| }; | |
| /* | |
| * Protects access to global structures etc. | |
| */ | |
| static __cacheline_aligned DEFINE_SPINLOCK(sbpcd_lock); | |
| static struct request_queue *sbpcd_queue; | |
| /* You can only set the first pair, from old MODULE_PARM code. */ | |
| static int sbpcd_set(const char *val, struct kernel_param *kp) | |
| { | |
| get_options((char *)val, 2, (int *)sbpcd); | |
| return 0; | |
| } | |
| module_param_call(sbpcd, sbpcd_set, NULL, NULL, 0); | |
| #define NUM_PROBE (sizeof(sbpcd) / sizeof(int)) | |
| /*==========================================================================*/ | |
| #define INLINE inline | |
| /*==========================================================================*/ | |
| /* | |
| * the forward references: | |
| */ | |
| static void sbp_sleep(u_int); | |
| static void mark_timeout_delay(u_long); | |
| static void mark_timeout_data(u_long); | |
| #if 0 | |
| static void mark_timeout_audio(u_long); | |
| #endif | |
| static void sbp_read_cmd(struct request *req); | |
| static int sbp_data(struct request *req); | |
| static int cmd_out(void); | |
| static int DiskInfo(void); | |
| /*==========================================================================*/ | |
| /* | |
| * pattern for printk selection: | |
| * | |
| * (1<<DBG_INF) necessary information | |
| * (1<<DBG_BSZ) BLOCK_SIZE trace | |
| * (1<<DBG_REA) "read" status trace | |
| * (1<<DBG_CHK) "media check" trace | |
| * (1<<DBG_TIM) datarate timer test | |
| * (1<<DBG_INI) initialization trace | |
| * (1<<DBG_TOC) tell TocEntry values | |
| * (1<<DBG_IOC) ioctl trace | |
| * (1<<DBG_STA) "ResponseStatus" trace | |
| * (1<<DBG_ERR) "cc_ReadError" trace | |
| * (1<<DBG_CMD) "cmd_out" trace | |
| * (1<<DBG_WRN) give explanation before auto-probing | |
| * (1<<DBG_MUL) multi session code test | |
| * (1<<DBG_IDX) "drive_id != 0" test code | |
| * (1<<DBG_IOX) some special information | |
| * (1<<DBG_DID) drive ID test | |
| * (1<<DBG_RES) drive reset info | |
| * (1<<DBG_SPI) SpinUp test info | |
| * (1<<DBG_IOS) ioctl trace: "subchannel" | |
| * (1<<DBG_IO2) ioctl trace: general | |
| * (1<<DBG_UPC) show UPC info | |
| * (1<<DBG_XA1) XA mode debugging | |
| * (1<<DBG_LCK) door (un)lock info | |
| * (1<<DBG_SQ1) dump SubQ frame | |
| * (1<<DBG_AUD) "read audio" debugging | |
| * (1<<DBG_SEQ) Sequoia interface configuration trace | |
| * (1<<DBG_LCS) Longshine LCS-7260 debugging trace | |
| * (1<<DBG_CD2) MKE/Funai CD200 debugging trace | |
| * (1<<DBG_TEA) TEAC CD-55A debugging trace | |
| * (1<<DBG_ECS) ECS-AT (Vertos-100) debugging trace | |
| * (1<<DBG_000) unnecessary information | |
| */ | |
| #if DISTRIBUTION | |
| static int sbpcd_debug = (1<<DBG_INF); | |
| #else | |
| static int sbpcd_debug = 0 & ((1<<DBG_INF) | | |
| (1<<DBG_TOC) | | |
| (1<<DBG_MUL) | | |
| (1<<DBG_UPC)); | |
| #endif /* DISTRIBUTION */ | |
| static int sbpcd_ioaddr = CDROM_PORT; /* default I/O base address */ | |
| static int sbpro_type = SBPRO; | |
| static unsigned char f_16bit; | |
| static unsigned char do_16bit; | |
| static int CDo_command, CDo_reset; | |
| static int CDo_sel_i_d, CDo_enable; | |
| static int CDi_info, CDi_status, CDi_data; | |
| static struct cdrom_msf msf; | |
| static struct cdrom_ti ti; | |
| static struct cdrom_tochdr tochdr; | |
| static struct cdrom_tocentry tocentry; | |
| static struct cdrom_subchnl SC; | |
| static struct cdrom_volctrl volctrl; | |
| static struct cdrom_read_audio read_audio; | |
| static unsigned char msgnum; | |
| static char msgbuf[80]; | |
| static int max_drives = MAX_DRIVES; | |
| module_param(max_drives, int, 0); | |
| #ifndef MODULE | |
| static unsigned char setup_done; | |
| static const char *str_sb_l = "soundblaster"; | |
| static const char *str_sp_l = "spea"; | |
| static const char *str_ss_l = "soundscape"; | |
| static const char *str_t16_l = "teac16bit"; | |
| static const char *str_ss = "SoundScape"; | |
| #endif | |
| static const char *str_sb = "SoundBlaster"; | |
| static const char *str_lm = "LaserMate"; | |
| static const char *str_sp = "SPEA"; | |
| static const char *str_t16 = "Teac16bit"; | |
| static const char *type; | |
| static const char *major_name="sbpcd"; | |
| /*==========================================================================*/ | |
| #ifdef FUTURE | |
| static DECLARE_WAIT_QUEUE_HEAD(sbp_waitq); | |
| #endif /* FUTURE */ | |
| static int teac=SBP_TEAC_SPEED; | |
| static int buffers=SBP_BUFFER_FRAMES; | |
| static u_char family0[]="MATSHITA"; /* MKE CR-521, CR-522, CR-523 */ | |
| static u_char family1[]="CR-56"; /* MKE CR-562, CR-563 */ | |
| static u_char family2[]="CD200"; /* MKE CD200, Funai CD200F */ | |
| static u_char familyL[]="LCS-7260"; /* Longshine LCS-7260 */ | |
| static u_char familyT[]="CD-55"; /* TEAC CD-55A */ | |
| static u_char familyV[]="ECS-AT"; /* ECS Vertos 100 */ | |
| static u_int recursion; /* internal testing only */ | |
| static u_int fatal_err; /* internal testing only */ | |
| static u_int response_count; | |
| static u_int flags_cmd_out; | |
| static u_char cmd_type; | |
| static u_char drvcmd[10]; | |
| static u_char infobuf[20]; | |
| static u_char xa_head_buf[CD_XA_HEAD]; | |
| static u_char xa_tail_buf[CD_XA_TAIL]; | |
| #if OLD_BUSY | |
| static volatile u_char busy_data; | |
| static volatile u_char busy_audio; /* true semaphores would be safer */ | |
| #endif /* OLD_BUSY */ | |
| static DECLARE_MUTEX(ioctl_read_sem); | |
| static u_long timeout; | |
| static volatile u_char timed_out_delay; | |
| static volatile u_char timed_out_data; | |
| #if 0 | |
| static volatile u_char timed_out_audio; | |
| #endif | |
| static u_int datarate= 1000000; | |
| static u_int maxtim16=16000000; | |
| static u_int maxtim04= 4000000; | |
| static u_int maxtim02= 2000000; | |
| static u_int maxtim_8= 30000; | |
| #if LONG_TIMING | |
| static u_int maxtim_data= 9000; | |
| #else | |
| static u_int maxtim_data= 3000; | |
| #endif /* LONG_TIMING */ | |
| #if DISTRIBUTION | |
| static int n_retries=6; | |
| #else | |
| static int n_retries=6; | |
| #endif | |
| /*==========================================================================*/ | |
| static int ndrives; | |
| static u_char drv_pattern[NR_SBPCD]={speed_auto,speed_auto,speed_auto,speed_auto}; | |
| /*==========================================================================*/ | |
| /* | |
| * drive space begins here (needed separate for each unit) | |
| */ | |
| static struct sbpcd_drive { | |
| char drv_id; /* "jumpered" drive ID or -1 */ | |
| char drv_sel; /* drive select lines bits */ | |
| char drive_model[9]; | |
| u_char firmware_version[4]; | |
| char f_eject; /* auto-eject flag: 0 or 1 */ | |
| u_char *sbp_buf; /* Pointer to internal data buffer, | |
| space allocated during sbpcd_init() */ | |
| u_int sbp_bufsiz; /* size of sbp_buf (# of frames) */ | |
| int sbp_first_frame; /* First frame in buffer */ | |
| int sbp_last_frame; /* Last frame in buffer */ | |
| int sbp_read_frames; /* Number of frames being read to buffer */ | |
| int sbp_current; /* Frame being currently read */ | |
| u_char mode; /* read_mode: READ_M1, READ_M2, READ_SC, READ_AU */ | |
| u_char *aud_buf; /* Pointer to audio data buffer, | |
| space allocated during sbpcd_init() */ | |
| u_int sbp_audsiz; /* size of aud_buf (# of raw frames) */ | |
| u_int drv_type; | |
| u_char drv_options; | |
| int status_bits; | |
| u_char diskstate_flags; | |
| u_char sense_byte; | |
| u_char CD_changed; | |
| char open_count; | |
| u_char error_byte; | |
| u_char f_multisession; | |
| u_int lba_multi; | |
| int first_session; | |
| int last_session; | |
| int track_of_last_session; | |
| u_char audio_state; | |
| u_int pos_audio_start; | |
| u_int pos_audio_end; | |
| char vol_chan0; | |
| u_char vol_ctrl0; | |
| char vol_chan1; | |
| u_char vol_ctrl1; | |
| #if 000 /* no supported drive has it */ | |
| char vol_chan2; | |
| u_char vol_ctrl2; | |
| char vol_chan3; | |
| u_char vol_ctrl3; | |
| #endif /*000 */ | |
| u_char volume_control; /* TEAC on/off bits */ | |
| u_char SubQ_ctl_adr; | |
| u_char SubQ_trk; | |
| u_char SubQ_pnt_idx; | |
| u_int SubQ_run_tot; | |
| u_int SubQ_run_trk; | |
| u_char SubQ_whatisthis; | |
| u_char UPC_ctl_adr; | |
| u_char UPC_buf[7]; | |
| int frame_size; | |
| int CDsize_frm; | |
| u_char xa_byte; /* 0x20: XA capabilities */ | |
| u_char n_first_track; /* binary */ | |
| u_char n_last_track; /* binary (not bcd), 0x01...0x63 */ | |
| u_int size_msf; /* time of whole CD, position of LeadOut track */ | |
| u_int size_blk; | |
| u_char TocEnt_nixbyte; /* em */ | |
| u_char TocEnt_ctl_adr; | |
| u_char TocEnt_number; | |
| u_char TocEnt_format; /* em */ | |
| u_int TocEnt_address; | |
| #ifdef SAFE_MIXED | |
| char has_data; | |
| #endif /* SAFE_MIXED */ | |
| u_char ored_ctl_adr; /* to detect if CDROM contains data tracks */ | |
| struct { | |
| u_char nixbyte; /* em */ | |
| u_char ctl_adr; /* 0x4x: data, 0x0x: audio */ | |
| u_char number; | |
| u_char format; /* em */ /* 0x00: lba, 0x01: msf */ | |
| u_int address; | |
| } TocBuffer[MAX_TRACKS+1]; /* last entry faked */ | |
| int in_SpinUp; /* CR-52x test flag */ | |
| int n_bytes; /* TEAC awaited response count */ | |
| u_char error_state, b3, b4; /* TEAC command error state */ | |
| u_char f_drv_error; /* TEAC command error flag */ | |
| u_char speed_byte; | |
| int frmsiz; | |
| u_char f_XA; /* 1: XA */ | |
| u_char type_byte; /* 0, 1, 3 */ | |
| u_char mode_xb_6; | |
| u_char mode_yb_7; | |
| u_char mode_xb_8; | |
| u_char delay; | |
| struct cdrom_device_info *sbpcd_infop; | |
| struct gendisk *disk; | |
| } D_S[NR_SBPCD]; | |
| static struct sbpcd_drive *current_drive = D_S; | |
| /* | |
| * drive space ends here (needed separate for each unit) | |
| */ | |
| /*==========================================================================*/ | |
| #if 0 | |
| unsigned long cli_sti; /* for saving the processor flags */ | |
| #endif | |
| /*==========================================================================*/ | |
| static DEFINE_TIMER(delay_timer, mark_timeout_delay, 0, 0); | |
| static DEFINE_TIMER(data_timer, mark_timeout_data, 0, 0); | |
| #if 0 | |
| static DEFINE_TIMER(audio_timer, mark_timeout_audio, 0, 0); | |
| #endif | |
| /*==========================================================================*/ | |
| /* | |
| * DDI interface | |
| */ | |
| static void msg(int level, const char *fmt, ...) | |
| { | |
| #if DISTRIBUTION | |
| #define MSG_LEVEL KERN_NOTICE | |
| #else | |
| #define MSG_LEVEL KERN_INFO | |
| #endif /* DISTRIBUTION */ | |
| char buf[256]; | |
| va_list args; | |
| if (!(sbpcd_debug&(1<<level))) return; | |
| msgnum++; | |
| if (msgnum>99) msgnum=0; | |
| va_start(args, fmt); | |
| vsnprintf(buf, sizeof(buf), fmt, args); | |
| va_end(args); | |
| printk(MSG_LEVEL "%s-%d [%02d]: %s", major_name, current_drive - D_S, msgnum, buf); | |
| #if KLOGD_PAUSE | |
| sbp_sleep(KLOGD_PAUSE); /* else messages get lost */ | |
| #endif /* KLOGD_PAUSE */ | |
| return; | |
| } | |
| /*==========================================================================*/ | |
| /* | |
| * DDI interface: runtime trace bit pattern maintenance | |
| */ | |
| static int sbpcd_dbg_ioctl(unsigned long arg, int level) | |
| { | |
| switch(arg) | |
| { | |
| case 0: /* OFF */ | |
| sbpcd_debug = DBG_INF; | |
| break; | |
| default: | |
| if (arg>=128) sbpcd_debug &= ~(1<<(arg-128)); | |
| else sbpcd_debug |= (1<<arg); | |
| } | |
| return (arg); | |
| } | |
| /*==========================================================================*/ | |
| static void mark_timeout_delay(u_long i) | |
| { | |
| timed_out_delay=1; | |
| #if 0 | |
| msg(DBG_TIM,"delay timer expired.\n"); | |
| #endif | |
| } | |
| /*==========================================================================*/ | |
| static void mark_timeout_data(u_long i) | |
| { | |
| timed_out_data=1; | |
| #if 0 | |
| msg(DBG_TIM,"data timer expired.\n"); | |
| #endif | |
| } | |
| /*==========================================================================*/ | |
| #if 0 | |
| static void mark_timeout_audio(u_long i) | |
| { | |
| timed_out_audio=1; | |
| #if 0 | |
| msg(DBG_TIM,"audio timer expired.\n"); | |
| #endif | |
| } | |
| #endif | |
| /*==========================================================================*/ | |
| /* | |
| * Wait a little while (used for polling the drive). | |
| */ | |
| static void sbp_sleep(u_int time) | |
| { | |
| sti(); | |
| schedule_timeout_interruptible(time); | |
| sti(); | |
| } | |
| /*==========================================================================*/ | |
| #define RETURN_UP(rc) {up(&ioctl_read_sem); return(rc);} | |
| /*==========================================================================*/ | |
| /* | |
| * convert logical_block_address to m-s-f_number (3 bytes only) | |
| */ | |
| static INLINE void lba2msf(int lba, u_char *msf) | |
| { | |
| lba += CD_MSF_OFFSET; | |
| msf[0] = lba / (CD_SECS*CD_FRAMES); | |
| lba %= CD_SECS*CD_FRAMES; | |
| msf[1] = lba / CD_FRAMES; | |
| msf[2] = lba % CD_FRAMES; | |
| } | |
| /*==========================================================================*/ | |
| /*==========================================================================*/ | |
| /* | |
| * convert msf-bin to msf-bcd | |
| */ | |
| static INLINE void bin2bcdx(u_char *p) /* must work only up to 75 or 99 */ | |
| { | |
| *p=((*p/10)<<4)|(*p%10); | |
| } | |
| /*==========================================================================*/ | |
| static INLINE u_int blk2msf(u_int blk) | |
| { | |
| MSF msf; | |
| u_int mm; | |
| msf.c[3] = 0; | |
| msf.c[2] = (blk + CD_MSF_OFFSET) / (CD_SECS * CD_FRAMES); | |
| mm = (blk + CD_MSF_OFFSET) % (CD_SECS * CD_FRAMES); | |
| msf.c[1] = mm / CD_FRAMES; | |
| msf.c[0] = mm % CD_FRAMES; | |
| return (msf.n); | |
| } | |
| /*==========================================================================*/ | |
| static INLINE u_int make16(u_char rh, u_char rl) | |
| { | |
| return ((rh<<8)|rl); | |
| } | |
| /*==========================================================================*/ | |
| static INLINE u_int make32(u_int rh, u_int rl) | |
| { | |
| return ((rh<<16)|rl); | |
| } | |
| /*==========================================================================*/ | |
| static INLINE u_char swap_nibbles(u_char i) | |
| { | |
| return ((i<<4)|(i>>4)); | |
| } | |
| /*==========================================================================*/ | |
| static INLINE u_char byt2bcd(u_char i) | |
| { | |
| return (((i/10)<<4)+i%10); | |
| } | |
| /*==========================================================================*/ | |
| static INLINE u_char bcd2bin(u_char bcd) | |
| { | |
| return ((bcd>>4)*10+(bcd&0x0F)); | |
| } | |
| /*==========================================================================*/ | |
| static INLINE int msf2blk(int msfx) | |
| { | |
| MSF msf; | |
| int i; | |
| msf.n=msfx; | |
| i=(msf.c[2] * CD_SECS + msf.c[1]) * CD_FRAMES + msf.c[0] - CD_MSF_OFFSET; | |
| if (i<0) return (0); | |
| return (i); | |
| } | |
| /*==========================================================================*/ | |
| /* | |
| * convert m-s-f_number (3 bytes only) to logical_block_address | |
| */ | |
| static INLINE int msf2lba(u_char *msf) | |
| { | |
| int i; | |
| i=(msf[0] * CD_SECS + msf[1]) * CD_FRAMES + msf[2] - CD_MSF_OFFSET; | |
| if (i<0) return (0); | |
| return (i); | |
| } | |
| /*==========================================================================*/ | |
| /* evaluate cc_ReadError code */ | |
| static int sta2err(int sta) | |
| { | |
| if (famT_drive) | |
| { | |
| if (sta==0x00) return (0); | |
| if (sta==0x01) return (-604); /* CRC error */ | |
| if (sta==0x02) return (-602); /* drive not ready */ | |
| if (sta==0x03) return (-607); /* unknown media */ | |
| if (sta==0x04) return (-612); /* general failure */ | |
| if (sta==0x05) return (0); | |
| if (sta==0x06) return (-ERR_DISKCHANGE); /* disk change */ | |
| if (sta==0x0b) return (-612); /* general failure */ | |
| if (sta==0xff) return (-612); /* general failure */ | |
| return (0); | |
| } | |
| else | |
| { | |
| if (sta<=2) return (sta); | |
| if (sta==0x05) return (-604); /* CRC error */ | |
| if (sta==0x06) return (-606); /* seek error */ | |
| if (sta==0x0d) return (-606); /* seek error */ | |
| if (sta==0x0e) return (-603); /* unknown command */ | |
| if (sta==0x14) return (-603); /* unknown command */ | |
| if (sta==0x0c) return (-611); /* read fault */ | |
| if (sta==0x0f) return (-611); /* read fault */ | |
| if (sta==0x10) return (-611); /* read fault */ | |
| if (sta>=0x16) return (-612); /* general failure */ | |
| if (sta==0x11) return (-ERR_DISKCHANGE); /* disk change (LCS: removed) */ | |
| if (famL_drive) | |
| if (sta==0x12) return (-ERR_DISKCHANGE); /* disk change (inserted) */ | |
| return (-602); /* drive not ready */ | |
| } | |
| } | |
| /*==========================================================================*/ | |
| static INLINE void clr_cmdbuf(void) | |
| { | |
| int i; | |
| for (i=0;i<10;i++) drvcmd[i]=0; | |
| cmd_type=0; | |
| } | |
| /*==========================================================================*/ | |
| static void flush_status(void) | |
| { | |
| int i; | |
| sbp_sleep(15*HZ/10); | |
| for (i=maxtim_data;i!=0;i--) inb(CDi_status); | |
| } | |
| /*====================================================================*/ | |
| /* | |
| * CDi status loop for Teac CD-55A (Rob Riggs) | |
| * | |
| * This is needed because for some strange reason | |
| * the CD-55A can take a real long time to give a | |
| * status response. This seems to happen after we | |
| * issue a READ command where a long seek is involved. | |
| * | |
| * I tried to ensure that we get max throughput with | |
| * minimal busy waiting. We busy wait at first, then | |
| * "switch gears" and start sleeping. We sleep for | |
| * longer periods of time the longer we wait. | |
| * | |
| */ | |
| static int CDi_stat_loop_T(void) | |
| { | |
| int i, gear=1; | |
| u_long timeout_1, timeout_2, timeout_3, timeout_4; | |
| timeout_1 = jiffies + HZ / 50; /* sbp_sleep(0) for a short period */ | |
| timeout_2 = jiffies + HZ / 5; /* nap for no more than 200ms */ | |
| timeout_3 = jiffies + 5 * HZ; /* sleep for up to 5s */ | |
| timeout_4 = jiffies + 45 * HZ; /* long sleep for up to 45s. */ | |
| do | |
| { | |
| i = inb(CDi_status); | |
| if (!(i&s_not_data_ready)) return (i); | |
| if (!(i&s_not_result_ready)) return (i); | |
| switch(gear) | |
| { | |
| case 4: | |
| sbp_sleep(HZ); | |
| if (time_after(jiffies, timeout_4)) gear++; | |
| msg(DBG_TEA, "CDi_stat_loop_T: long sleep active.\n"); | |
| break; | |
| case 3: | |
| sbp_sleep(HZ/10); | |
| if (time_after(jiffies, timeout_3)) gear++; | |
| break; | |
| case 2: | |
| sbp_sleep(HZ/100); | |
| if (time_after(jiffies, timeout_2)) gear++; | |
| break; | |
| case 1: | |
| sbp_sleep(0); | |
| if (time_after(jiffies, timeout_1)) gear++; | |
| } | |
| } while (gear < 5); | |
| return -1; | |
| } | |
| /*==========================================================================*/ | |
| static int CDi_stat_loop(void) | |
| { | |
| int i,j; | |
| for(timeout = jiffies + 10*HZ, i=maxtim_data; time_before(jiffies, timeout); ) | |
| { | |
| for ( ;i!=0;i--) | |
| { | |
| j=inb(CDi_status); | |
| if (!(j&s_not_data_ready)) return (j); | |
| if (!(j&s_not_result_ready)) return (j); | |
| if (fam0L_drive) if (j&s_attention) return (j); | |
| } | |
| sbp_sleep(1); | |
| i = 1; | |
| } | |
| msg(DBG_LCS,"CDi_stat_loop failed in line %d\n", __LINE__); | |
| return (-1); | |
| } | |
| /*==========================================================================*/ | |
| #if 00000 | |
| /*==========================================================================*/ | |
| static int tst_DataReady(void) | |
| { | |
| int i; | |
| i=inb(CDi_status); | |
| if (i&s_not_data_ready) return (0); | |
| return (1); | |
| } | |
| /*==========================================================================*/ | |
| static int tst_ResultReady(void) | |
| { | |
| int i; | |
| i=inb(CDi_status); | |
| if (i&s_not_result_ready) return (0); | |
| return (1); | |
| } | |
| /*==========================================================================*/ | |
| static int tst_Attention(void) | |
| { | |
| int i; | |
| i=inb(CDi_status); | |
| if (i&s_attention) return (1); | |
| return (0); | |
| } | |
| /*==========================================================================*/ | |
| #endif | |
| /*==========================================================================*/ | |
| static int ResponseInfo(void) | |
| { | |
| int i,j,st=0; | |
| u_long timeout; | |
| for (i=0,timeout=jiffies+HZ;i<response_count;i++) | |
| { | |
| for (j=maxtim_data; ; ) | |
| { | |
| for ( ;j!=0;j-- ) | |
| { | |
| st=inb(CDi_status); | |
| if (!(st&s_not_result_ready)) break; | |
| } | |
| if ((j!=0)||time_after_eq(jiffies, timeout)) break; | |
| sbp_sleep(1); | |
| j = 1; | |
| } | |
| if (time_after_eq(jiffies, timeout)) break; | |
| infobuf[i]=inb(CDi_info); | |
| } | |
| #if 000 | |
| while (!(inb(CDi_status)&s_not_result_ready)) | |
| { | |
| infobuf[i++]=inb(CDi_info); | |
| } | |
| j=i-response_count; | |
| if (j>0) msg(DBG_INF,"ResponseInfo: got %d trailing bytes.\n",j); | |
| #endif /* 000 */ | |
| for (j=0;j<i;j++) | |
| sprintf(&msgbuf[j*3]," %02X",infobuf[j]); | |
| msgbuf[j*3]=0; | |
| msg(DBG_CMD,"ResponseInfo:%s (%d,%d)\n",msgbuf,response_count,i); | |
| j=response_count-i; | |
| if (j>0) return (-j); | |
| else return (i); | |
| } | |
| /*==========================================================================*/ | |
| static void EvaluateStatus(int st) | |
| { | |
| current_drive->status_bits=0; | |
| if (fam1_drive) current_drive->status_bits=st|p_success; | |
| else if (fam0_drive) | |
| { | |
| if (st&p_caddin_old) current_drive->status_bits |= p_door_closed|p_caddy_in; | |
| if (st&p_spinning) current_drive->status_bits |= p_spinning; | |
| if (st&p_check) current_drive->status_bits |= p_check; | |
| if (st&p_success_old) current_drive->status_bits |= p_success; | |
| if (st&p_busy_old) current_drive->status_bits |= p_busy_new; | |
| if (st&p_disk_ok) current_drive->status_bits |= p_disk_ok; | |
| } | |
| else if (famLV_drive) | |
| { | |
| current_drive->status_bits |= p_success; | |
| if (st&p_caddin_old) current_drive->status_bits |= p_disk_ok|p_caddy_in; | |
| if (st&p_spinning) current_drive->status_bits |= p_spinning; | |
| if (st&p_check) current_drive->status_bits |= p_check; | |
| if (st&p_busy_old) current_drive->status_bits |= p_busy_new; | |
| if (st&p_lcs_door_closed) current_drive->status_bits |= p_door_closed; | |
| if (st&p_lcs_door_locked) current_drive->status_bits |= p_door_locked; | |
| } | |
| else if (fam2_drive) | |
| { | |
| current_drive->status_bits |= p_success; | |
| if (st&p2_check) current_drive->status_bits |= p1_check; | |
| if (st&p2_door_closed) current_drive->status_bits |= p1_door_closed; | |
| if (st&p2_disk_in) current_drive->status_bits |= p1_disk_in; | |
| if (st&p2_busy1) current_drive->status_bits |= p1_busy; | |
| if (st&p2_busy2) current_drive->status_bits |= p1_busy; | |
| if (st&p2_spinning) current_drive->status_bits |= p1_spinning; | |
| if (st&p2_door_locked) current_drive->status_bits |= p1_door_locked; | |
| if (st&p2_disk_ok) current_drive->status_bits |= p1_disk_ok; | |
| } | |
| else if (famT_drive) | |
| { | |
| return; /* still needs to get coded */ | |
| current_drive->status_bits |= p_success; | |
| if (st&p2_check) current_drive->status_bits |= p1_check; | |
| if (st&p2_door_closed) current_drive->status_bits |= p1_door_closed; | |
| if (st&p2_disk_in) current_drive->status_bits |= p1_disk_in; | |
| if (st&p2_busy1) current_drive->status_bits |= p1_busy; | |
| if (st&p2_busy2) current_drive->status_bits |= p1_busy; | |
| if (st&p2_spinning) current_drive->status_bits |= p1_spinning; | |
| if (st&p2_door_locked) current_drive->status_bits |= p1_door_locked; | |
| if (st&p2_disk_ok) current_drive->status_bits |= p1_disk_ok; | |
| } | |
| return; | |
| } | |
| /*==========================================================================*/ | |
| static int cmd_out_T(void); | |
| static int get_state_T(void) | |
| { | |
| int i; | |
| clr_cmdbuf(); | |
| current_drive->n_bytes=1; | |
| drvcmd[0]=CMDT_STATUS; | |
| i=cmd_out_T(); | |
| if (i>=0) i=infobuf[0]; | |
| else | |
| { | |
| msg(DBG_TEA,"get_state_T error %d\n", i); | |
| return (i); | |
| } | |
| if (i>=0) | |
| /* 2: closed, disk in */ | |
| current_drive->status_bits=p1_door_closed|p1_disk_in|p1_spinning|p1_disk_ok; | |
| else if (current_drive->error_state==6) | |
| { | |
| /* 3: closed, disk in, changed ("06 xx xx") */ | |
| current_drive->status_bits=p1_door_closed|p1_disk_in; | |
| current_drive->CD_changed=0xFF; | |
| current_drive->diskstate_flags &= ~toc_bit; | |
| } | |
| else if ((current_drive->error_state!=2)||(current_drive->b3!=0x3A)||(current_drive->b4==0x00)) | |
| { | |
| /* 1: closed, no disk ("xx yy zz"or "02 3A 00") */ | |
| current_drive->status_bits=p1_door_closed; | |
| current_drive->open_count=0; | |
| } | |
| else if (current_drive->b4==0x01) | |
| { | |
| /* 0: open ("02 3A 01") */ | |
| current_drive->status_bits=0; | |
| current_drive->open_count=0; | |
| } | |
| else | |
| { | |
| /* 1: closed, no disk ("02 3A xx") */ | |
| current_drive->status_bits=p1_door_closed; | |
| current_drive->open_count=0; | |
| } | |
| return (current_drive->status_bits); | |
| } | |
| /*==========================================================================*/ | |
| static int ResponseStatus(void) | |
| { | |
| int i,j; | |
| u_long timeout; | |
| msg(DBG_STA,"doing ResponseStatus...\n"); | |
| if (famT_drive) return (get_state_T()); | |
| if (flags_cmd_out & f_respo3) timeout = jiffies; | |
| else if (flags_cmd_out & f_respo2) timeout = jiffies + 16*HZ; | |
| else timeout = jiffies + 4*HZ; | |
| j=maxtim_8; | |
| do | |
| { | |
| for ( ;j!=0;j--) | |
| { | |
| i=inb(CDi_status); | |
| if (!(i&s_not_result_ready)) break; | |
| } | |
| if ((j!=0)||time_after(jiffies, timeout)) break; | |
| sbp_sleep(1); | |
| j = 1; | |
| } | |
| while (1); | |
| if (j==0) | |
| { | |
| if ((flags_cmd_out & f_respo3) == 0) | |
| msg(DBG_STA,"ResponseStatus: timeout.\n"); | |
| current_drive->status_bits=0; | |
| return (-401); | |
| } | |
| i=inb(CDi_info); | |
| msg(DBG_STA,"ResponseStatus: response %02X.\n", i); | |
| EvaluateStatus(i); | |
| msg(DBG_STA,"status_bits=%02X, i=%02X\n",current_drive->status_bits,i); | |
| return (current_drive->status_bits); | |
| } | |
| /*==========================================================================*/ | |
| static void cc_ReadStatus(void) | |
| { | |
| int i; | |
| msg(DBG_STA,"giving cc_ReadStatus command\n"); | |
| if (famT_drive) return; | |
| SBPCD_CLI; | |
| if (fam0LV_drive) OUT(CDo_command,CMD0_STATUS); | |
| else if (fam1_drive) OUT(CDo_command,CMD1_STATUS); | |
| else if (fam2_drive) OUT(CDo_command,CMD2_STATUS); | |
| if (!fam0LV_drive) for (i=0;i<6;i++) OUT(CDo_command,0); | |
| SBPCD_STI; | |
| } | |
| /*==========================================================================*/ | |
| static int cc_ReadError(void) | |
| { | |
| int i; | |
| clr_cmdbuf(); | |
| msg(DBG_ERR,"giving cc_ReadError command.\n"); | |
| if (fam1_drive) | |
| { | |
| drvcmd[0]=CMD1_READ_ERR; | |
| response_count=8; | |
| flags_cmd_out=f_putcmd|f_ResponseStatus; | |
| } | |
| else if (fam0LV_drive) | |
| { | |
| drvcmd[0]=CMD0_READ_ERR; | |
| response_count=6; | |
| if (famLV_drive) | |
| flags_cmd_out=f_putcmd; | |
| else | |
| flags_cmd_out=f_putcmd|f_getsta|f_ResponseStatus; | |
| } | |
| else if (fam2_drive) | |
| { | |
| drvcmd[0]=CMD2_READ_ERR; | |
| response_count=6; | |
| flags_cmd_out=f_putcmd; | |
| } | |
| else if (famT_drive) | |
| { | |
| response_count=5; | |
| drvcmd[0]=CMDT_READ_ERR; | |
| } | |
| i=cmd_out(); | |
| current_drive->error_byte=0; | |
| msg(DBG_ERR,"cc_ReadError: cmd_out(CMDx_READ_ERR) returns %d (%02X)\n",i,i); | |
| if (i<0) return (i); | |
| if (fam0V_drive) i=1; | |
| else i=2; | |
| current_drive->error_byte=infobuf[i]; | |
| msg(DBG_ERR,"cc_ReadError: infobuf[%d] is %d (%02X)\n",i,current_drive->error_byte,current_drive->error_byte); | |
| i=sta2err(infobuf[i]); | |
| if (i==-ERR_DISKCHANGE) | |
| { | |
| current_drive->CD_changed=0xFF; | |
| current_drive->diskstate_flags &= ~toc_bit; | |
| } | |
| return (i); | |
| } | |
| /*==========================================================================*/ | |
| static int cc_DriveReset(void); | |
| static int cmd_out_T(void) | |
| { | |
| #undef CMDT_TRIES | |
| #define CMDT_TRIES 1000 | |
| #define TEST_FALSE_FF 1 | |
| int i, j, l=0, m, ntries; | |
| unsigned long flags; | |
| current_drive->error_state=0; | |
| current_drive->b3=0; | |
| current_drive->b4=0; | |
| current_drive->f_drv_error=0; | |
| for (i=0;i<10;i++) sprintf(&msgbuf[i*3]," %02X",drvcmd[i]); | |
| msgbuf[i*3]=0; | |
| msg(DBG_CMD,"cmd_out_T:%s\n",msgbuf); | |
| OUT(CDo_sel_i_d,0); | |
| OUT(CDo_enable,current_drive->drv_sel); | |
| i=inb(CDi_status); | |
| do_16bit=0; | |
| if ((f_16bit)&&(!(i&0x80))) | |
| { | |
| do_16bit=1; | |
| msg(DBG_TEA,"cmd_out_T: do_16bit set.\n"); | |
| } | |
| if (!(i&s_not_result_ready)) | |
| do | |
| { | |
| j=inb(CDi_info); | |
| i=inb(CDi_status); | |
| sbp_sleep(0); | |
| msg(DBG_TEA,"cmd_out_T: spurious !s_not_result_ready. (%02X)\n", j); | |
| } | |
| while (!(i&s_not_result_ready)); | |
| save_flags(flags); cli(); | |
| for (i=0;i<10;i++) OUT(CDo_command,drvcmd[i]); | |
| restore_flags(flags); | |
| for (ntries=CMDT_TRIES;ntries>0;ntries--) | |
| { | |
| if (drvcmd[0]==CMDT_READ_VER) sbp_sleep(HZ); /* fixme */ | |
| #if 01 | |
| OUT(CDo_sel_i_d,1); | |
| #endif /* 01 */ | |
| if (teac==2) | |
| { | |
| if ((i=CDi_stat_loop_T()) == -1) break; | |
| } | |
| else | |
| { | |
| #if 0 | |
| OUT(CDo_sel_i_d,1); | |
| #endif /* 0 */ | |
| i=inb(CDi_status); | |
| } | |
| if (!(i&s_not_data_ready)) /* f.e. CMDT_DISKINFO */ | |
| { | |
| OUT(CDo_sel_i_d,1); | |
| if (drvcmd[0]==CMDT_READ) return (0); /* handled elsewhere */ | |
| if (drvcmd[0]==CMDT_DISKINFO) | |
| { | |
| l=0; | |
| do | |
| { | |
| if (do_16bit) | |
| { | |
| i=inw(CDi_data); | |
| infobuf[l++]=i&0x0ff; | |
| infobuf[l++]=i>>8; | |
| #if TEST_FALSE_FF | |
| if ((l==2)&&(infobuf[0]==0x0ff)) | |
| { | |
| infobuf[0]=infobuf[1]; | |
| l=1; | |
| msg(DBG_TEA,"cmd_out_T: do_16bit: false first byte!\n"); | |
| } | |
| #endif /* TEST_FALSE_FF */ | |
| } | |
| else infobuf[l++]=inb(CDi_data); | |
| i=inb(CDi_status); | |
| } | |
| while (!(i&s_not_data_ready)); | |
| for (j=0;j<l;j++) sprintf(&msgbuf[j*3]," %02X",infobuf[j]); | |
| msgbuf[j*3]=0; | |
| msg(DBG_CMD,"cmd_out_T data response:%s\n", msgbuf); | |
| } | |
| else | |
| { | |
| msg(DBG_TEA,"cmd_out_T: data response with cmd_%02X!\n", | |
| drvcmd[0]); | |
| j=0; | |
| do | |
| { | |
| if (do_16bit) i=inw(CDi_data); | |
| else i=inb(CDi_data); | |
| j++; | |
| i=inb(CDi_status); | |
| } | |
| while (!(i&s_not_data_ready)); | |
| msg(DBG_TEA,"cmd_out_T: data response: discarded %d bytes/words.\n", j); | |
| fatal_err++; | |
| } | |
| } | |
| i=inb(CDi_status); | |
| if (!(i&s_not_result_ready)) | |
| { | |
| OUT(CDo_sel_i_d,0); | |
| if (drvcmd[0]==CMDT_DISKINFO) m=l; | |
| else m=0; | |
| do | |
| { | |
| infobuf[m++]=inb(CDi_info); | |
| i=inb(CDi_status); | |
| } | |
| while (!(i&s_not_result_ready)); | |
| for (j=0;j<m;j++) sprintf(&msgbuf[j*3]," %02X",infobuf[j]); | |
| msgbuf[j*3]=0; | |
| msg(DBG_CMD,"cmd_out_T info response:%s\n", msgbuf); | |
| if (drvcmd[0]==CMDT_DISKINFO) | |
| { | |
| infobuf[0]=infobuf[l]; | |
| if (infobuf[0]!=0x02) return (l); /* data length */ | |
| } | |
| else if (infobuf[0]!=0x02) return (m); /* info length */ | |
| do | |
| { | |
| ++recursion; | |
| if (recursion>1) msg(DBG_TEA,"cmd_out_T READ_ERR recursion (%02X): %d !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!\n", drvcmd[0], recursion); | |
| clr_cmdbuf(); | |
| drvcmd[0]=CMDT_READ_ERR; | |
| j=cmd_out_T(); /* !!! recursive here !!! */ | |
| --recursion; | |
| sbp_sleep(1); | |
| } | |
| while (j<0); | |
| current_drive->error_state=infobuf[2]; | |
| current_drive->b3=infobuf[3]; | |
| current_drive->b4=infobuf[4]; | |
| if (current_drive->f_drv_error) | |
| { | |
| current_drive->f_drv_error=0; | |
| cc_DriveReset(); | |
| current_drive->error_state=2; | |
| } | |
| return (-current_drive->error_state-400); | |
| } | |
| if (drvcmd[0]==CMDT_READ) return (0); /* handled elsewhere */ | |
| if ((teac==0)||(ntries<(CMDT_TRIES-5))) sbp_sleep(HZ/10); | |
| else sbp_sleep(HZ/100); | |
| if (ntries>(CMDT_TRIES-50)) continue; | |
| msg(DBG_TEA,"cmd_out_T: next CMDT_TRIES (%02X): %d.\n", drvcmd[0], ntries-1); | |
| } | |
| current_drive->f_drv_error=1; | |
| cc_DriveReset(); | |
| current_drive->error_state=2; | |
| return (-99); | |
| } | |
| /*==========================================================================*/ | |
| static int cmd_out(void) | |
| { | |
| int i=0; | |
| if (famT_drive) return(cmd_out_T()); | |
| if (flags_cmd_out&f_putcmd) | |
| { | |
| unsigned long flags; | |
| for (i=0;i<7;i++) | |
| sprintf(&msgbuf[i*3], " %02X", drvcmd[i]); | |
| msgbuf[i*3]=0; | |
| msg(DBG_CMD,"cmd_out:%s\n", msgbuf); | |
| save_flags(flags); cli(); | |
| for (i=0;i<7;i++) OUT(CDo_command,drvcmd[i]); | |
| restore_flags(flags); | |
| } | |
| if (response_count!=0) | |
| { | |
| if (cmd_type!=0) | |
| { | |
| if (sbpro_type==1) OUT(CDo_sel_i_d,1); | |
| msg(DBG_INF,"misleaded to try ResponseData.\n"); | |
| if (sbpro_type==1) OUT(CDo_sel_i_d,0); | |
| return (-22); | |
| } | |
| else i=ResponseInfo(); | |
| if (i<0) return (i); | |
| } | |
| if (current_drive->in_SpinUp) msg(DBG_SPI,"in_SpinUp: to CDi_stat_loop.\n"); | |
| if (flags_cmd_out&f_lopsta) | |
| { | |
| i=CDi_stat_loop(); | |
| if ((i<0)||!(i&s_attention)) return (-8); | |
| } | |
| if (!(flags_cmd_out&f_getsta)) goto LOC_229; | |
| LOC_228: | |
| if (current_drive->in_SpinUp) msg(DBG_SPI,"in_SpinUp: to cc_ReadStatus.\n"); | |
| cc_ReadStatus(); | |
| LOC_229: | |
| if (flags_cmd_out&f_ResponseStatus) | |
| { | |
| if (current_drive->in_SpinUp) msg(DBG_SPI,"in_SpinUp: to ResponseStatus.\n"); | |
| i=ResponseStatus(); | |
| /* builds status_bits, returns orig. status or p_busy_new */ | |
| if (i<0) return (i); | |
| if (flags_cmd_out&(f_bit1|f_wait_if_busy)) | |
| { | |
| if (!st_check) | |
| { | |
| if ((flags_cmd_out&f_bit1)&&(i&p_success)) goto LOC_232; | |
| if ((!(flags_cmd_out&f_wait_if_busy))||(!st_busy)) goto LOC_228; | |
| } | |
| } | |
| } | |
| LOC_232: | |
| if (!(flags_cmd_out&f_obey_p_check)) return (0); | |
| if (!st_check) return (0); | |
| if (current_drive->in_SpinUp) msg(DBG_SPI,"in_SpinUp: to cc_ReadError.\n"); | |
| i=cc_ReadError(); | |
| if (current_drive->in_SpinUp) msg(DBG_SPI,"in_SpinUp: to cmd_out OK.\n"); | |
| msg(DBG_000,"cmd_out: cc_ReadError=%d\n", i); | |
| return (i); | |
| } | |
| /*==========================================================================*/ | |
| static int cc_Seek(u_int pos, char f_blk_msf) | |
| { | |
| int i; | |
| clr_cmdbuf(); | |
| if (f_blk_msf>1) return (-3); | |
| if (fam0V_drive) | |
| { | |
| drvcmd[0]=CMD0_SEEK; | |
| if (f_blk_msf==1) pos=msf2blk(pos); | |
| drvcmd[2]=(pos>>16)&0x00FF; | |
| drvcmd[3]=(pos>>8)&0x00FF; | |
| drvcmd[4]=pos&0x00FF; | |
| if (fam0_drive) | |
| flags_cmd_out = f_putcmd | f_respo2 | f_lopsta | f_getsta | | |
| f_ResponseStatus | f_obey_p_check | f_bit1; | |
| else | |
| flags_cmd_out = f_putcmd; | |
| } | |
| else if (fam1L_drive) | |
| { | |
| drvcmd[0]=CMD1_SEEK; /* same as CMD1_ and CMDL_ */ | |
| if (f_blk_msf==0) pos=blk2msf(pos); | |
| drvcmd[1]=(pos>>16)&0x00FF; | |
| drvcmd[2]=(pos>>8)&0x00FF; | |
| drvcmd[3]=pos&0x00FF; | |
| if (famL_drive) | |
| flags_cmd_out=f_putcmd|f_respo2|f_lopsta|f_getsta|f_ResponseStatus|f_obey_p_check|f_bit1; | |
| else | |
| flags_cmd_out=f_putcmd|f_respo2|f_ResponseStatus|f_obey_p_check; | |
| } | |
| else if (fam2_drive) | |
| { | |
| drvcmd[0]=CMD2_SEEK; | |
| if (f_blk_msf==0) pos=blk2msf(pos); | |
| drvcmd[2]=(pos>>24)&0x00FF; | |
| drvcmd[3]=(pos>>16)&0x00FF; | |
| drvcmd[4]=(pos>>8)&0x00FF; | |
| drvcmd[5]=pos&0x00FF; | |
| flags_cmd_out=f_putcmd|f_ResponseStatus; | |
| } | |
| else if (famT_drive) | |
| { | |
| drvcmd[0]=CMDT_SEEK; | |
| if (f_blk_msf==1) pos=msf2blk(pos); | |
| drvcmd[2]=(pos>>24)&0x00FF; | |
| drvcmd[3]=(pos>>16)&0x00FF; | |
| drvcmd[4]=(pos>>8)&0x00FF; | |
| drvcmd[5]=pos&0x00FF; | |
| current_drive->n_bytes=1; | |
| } | |
| response_count=0; | |
| i=cmd_out(); | |
| return (i); | |
| } | |
| /*==========================================================================*/ | |
| static int cc_SpinUp(void) | |
| { | |
| int i; | |
| msg(DBG_SPI,"SpinUp.\n"); | |
| current_drive->in_SpinUp = 1; | |
| clr_cmdbuf(); | |
| if (fam0LV_drive) | |
| { | |
| drvcmd[0]=CMD0_SPINUP; | |
| if (fam0L_drive) | |
| flags_cmd_out=f_putcmd|f_respo2|f_lopsta|f_getsta| | |
| f_ResponseStatus|f_obey_p_check|f_bit1; | |
| else | |
| flags_cmd_out=f_putcmd; | |
| } | |
| else if (fam1_drive) | |
| { | |
| drvcmd[0]=CMD1_SPINUP; | |
| flags_cmd_out=f_putcmd|f_respo2|f_ResponseStatus|f_obey_p_check; | |
| } | |
| else if (fam2_drive) | |
| { | |
| drvcmd[0]=CMD2_TRAY_CTL; | |
| drvcmd[4]=0x01; /* "spinup" */ | |
| flags_cmd_out=f_putcmd|f_respo2|f_ResponseStatus|f_obey_p_check; | |
| } | |
| else if (famT_drive) | |
| { | |
| drvcmd[0]=CMDT_TRAY_CTL; | |
| drvcmd[4]=0x03; /* "insert", it hopefully spins the drive up */ | |
| } | |
| response_count=0; | |
| i=cmd_out(); | |
| current_drive->in_SpinUp = 0; | |
| return (i); | |
| } | |
| /*==========================================================================*/ | |
| static int cc_SpinDown(void) | |
| { | |
| int i; | |
| if (fam0_drive) return (0); | |
| clr_cmdbuf(); | |
| response_count=0; | |
| if (fam1_drive) | |
| { | |
| drvcmd[0]=CMD1_SPINDOWN; | |
| flags_cmd_out=f_putcmd|f_respo2|f_ResponseStatus|f_obey_p_check; | |
| } | |
| else if (fam2_drive) | |
| { | |
| drvcmd[0]=CMD2_TRAY_CTL; | |
| drvcmd[4]=0x02; /* "eject" */ | |
| flags_cmd_out=f_putcmd|f_ResponseStatus; | |
| } | |
| else if (famL_drive) | |
| { | |
| drvcmd[0]=CMDL_SPINDOWN; | |
| drvcmd[1]=1; | |
| flags_cmd_out=f_putcmd|f_respo2|f_lopsta|f_getsta|f_ResponseStatus|f_obey_p_check|f_bit1; | |
| } | |
| else if (famV_drive) | |
| { | |
| drvcmd[0]=CMDV_SPINDOWN; | |
| flags_cmd_out=f_putcmd; | |
| } | |
| else if (famT_drive) | |
| { | |
| drvcmd[0]=CMDT_TRAY_CTL; | |
| drvcmd[4]=0x02; /* "eject" */ | |
| } | |
| i=cmd_out(); | |
| return (i); | |
| } | |
| /*==========================================================================*/ | |
| static int cc_get_mode_T(void) | |
| { | |
| int i; | |
| clr_cmdbuf(); | |
| response_count=10; | |
| drvcmd[0]=CMDT_GETMODE; | |
| drvcmd[4]=response_count; | |
| i=cmd_out_T(); | |
| return (i); | |
| } | |
| /*==========================================================================*/ | |
| static int cc_set_mode_T(void) | |
| { | |
| int i; | |
| clr_cmdbuf(); | |
| response_count=1; | |
| drvcmd[0]=CMDT_SETMODE; | |
| drvcmd[1]=current_drive->speed_byte; | |
| drvcmd[2]=current_drive->frmsiz>>8; | |
| drvcmd[3]=current_drive->frmsiz&0x0FF; | |
| drvcmd[4]=current_drive->f_XA; /* 1: XA */ | |
| drvcmd[5]=current_drive->type_byte; /* 0, 1, 3 */ | |
| drvcmd[6]=current_drive->mode_xb_6; | |
| drvcmd[7]=current_drive->mode_yb_7|current_drive->volume_control; | |
| drvcmd[8]=current_drive->mode_xb_8; | |
| drvcmd[9]=current_drive->delay; | |
| i=cmd_out_T(); | |
| return (i); | |
| } | |
| /*==========================================================================*/ | |
| static int cc_prep_mode_T(void) | |
| { | |
| int i, j; | |
| i=cc_get_mode_T(); | |
| if (i<0) return (i); | |
| for (i=0;i<10;i++) | |
| sprintf(&msgbuf[i*3], " %02X", infobuf[i]); | |
| msgbuf[i*3]=0; | |
| msg(DBG_TEA,"CMDT_GETMODE:%s\n", msgbuf); | |
| current_drive->speed_byte=0x02; /* 0x02: auto quad, 0x82: quad, 0x81: double, 0x80: single */ | |
| current_drive->frmsiz=make16(infobuf[2],infobuf[3]); | |
| current_drive->f_XA=infobuf[4]; | |
| if (current_drive->f_XA==0) current_drive->type_byte=0; | |
| else current_drive->type_byte=1; | |
| current_drive->mode_xb_6=infobuf[6]; | |
| current_drive->mode_yb_7=1; | |
| current_drive->mode_xb_8=infobuf[8]; | |
| current_drive->delay=0; /* 0, 1, 2, 3 */ | |
| j=cc_set_mode_T(); | |
| i=cc_get_mode_T(); | |
| for (i=0;i<10;i++) | |
| sprintf(&msgbuf[i*3], " %02X", infobuf[i]); | |
| msgbuf[i*3]=0; | |
| msg(DBG_TEA,"CMDT_GETMODE:%s\n", msgbuf); | |
| return (j); | |
| } | |
| /*==========================================================================*/ | |
| static int cc_SetSpeed(u_char speed, u_char x1, u_char x2) | |
| { | |
| int i; | |
| if (fam0LV_drive) return (0); | |
| clr_cmdbuf(); | |
| response_count=0; | |
| if (fam1_drive) | |
| { | |
| drvcmd[0]=CMD1_SETMODE; | |
| drvcmd[1]=0x03; | |
| drvcmd[2]=speed; | |
| drvcmd[3]=x1; | |
| drvcmd[4]=x2; | |
| flags_cmd_out=f_putcmd|f_ResponseStatus|f_obey_p_check; | |
| } | |
| else if (fam2_drive) | |
| { | |
| drvcmd[0]=CMD2_SETSPEED; | |
| if (speed&speed_auto) | |
| { | |
| drvcmd[2]=0xFF; | |
| drvcmd[3]=0xFF; | |
| } | |
| else | |
| { | |
| drvcmd[2]=0; | |
| drvcmd[3]=150; | |
| } | |
| flags_cmd_out=f_putcmd|f_ResponseStatus|f_obey_p_check; | |
| } | |
| else if (famT_drive) | |
| { | |
| return (0); | |
| } | |
| i=cmd_out(); | |
| return (i); | |
| } | |
| /*==========================================================================*/ | |
| static int cc_SetVolume(void) | |
| { | |
| int i; | |
| u_char channel0,channel1,volume0,volume1; | |
| u_char control0,value0,control1,value1; | |
| current_drive->diskstate_flags &= ~volume_bit; | |
| clr_cmdbuf(); | |
| channel0=current_drive->vol_chan0; | |
| volume0=current_drive->vol_ctrl0; | |
| channel1=control1=current_drive->vol_chan1; | |
| volume1=value1=current_drive->vol_ctrl1; | |
| control0=value0=0; | |
| if (famV_drive) return (0); | |
| if (((current_drive->drv_options&audio_mono)!=0)&&(current_drive->drv_type>=drv_211)) | |
| { | |
| if ((volume0!=0)&&(volume1==0)) | |
| { | |
| volume1=volume0; | |
| channel1=channel0; | |
| } | |
| else if ((volume0==0)&&(volume1!=0)) | |
| { | |
| volume0=volume1; | |
| channel0=channel1; | |
| } | |
| } | |
| if (channel0>1) | |
| { | |
| channel0=0; | |
| volume0=0; | |
| } | |
| if (channel1>1) | |
| { | |
| channel1=1; | |
| volume1=0; | |
| } | |
| if (fam1_drive) | |
| { | |
| control0=channel0+1; | |
| control1=channel1+1; | |
| value0=(volume0>volume1)?volume0:volume1; | |
| value1=value0; | |
| if (volume0==0) control0=0; | |
| if (volume1==0) control1=0; | |
| drvcmd[0]=CMD1_SETMODE; | |
| drvcmd[1]=0x05; | |
| drvcmd[3]=control0; | |
| drvcmd[4]=value0; | |
| drvcmd[5]=control1; | |
| drvcmd[6]=value1; | |
| flags_cmd_out=f_putcmd|f_ResponseStatus|f_obey_p_check; | |
| } | |
| else if (fam2_drive) | |
| { | |
| control0=channel0+1; | |
| control1=channel1+1; | |
| value0=(volume0>volume1)?volume0:volume1; | |
| value1=value0; | |
| if (volume0==0) control0=0; | |
| if (volume1==0) control1=0; | |
| drvcmd[0]=CMD2_SETMODE; | |
| drvcmd[1]=0x0E; | |
| drvcmd[3]=control0; | |
| drvcmd[4]=value0; | |
| drvcmd[5]=control1; | |
| drvcmd[6]=value1; | |
| flags_cmd_out=f_putcmd|f_ResponseStatus; | |
| } | |
| else if (famL_drive) | |
| { | |
| if ((volume0==0)||(channel0!=0)) control0 |= 0x80; | |
| if ((volume1==0)||(channel1!=1)) control0 |= 0x40; | |
| if (volume0|volume1) value0=0x80; | |
| drvcmd[0]=CMDL_SETMODE; | |
| drvcmd[1]=0x03; | |
| drvcmd[4]=control0; | |
| drvcmd[5]=value0; | |
| flags_cmd_out=f_putcmd|f_lopsta|f_getsta|f_ResponseStatus|f_obey_p_check|f_bit1; | |
| } | |
| else if (fam0_drive) /* different firmware levels */ | |
| { | |
| if (current_drive->drv_type>=drv_300) | |
| { | |
| control0=volume0&0xFC; | |
| value0=volume1&0xFC; | |
| if ((volume0!=0)&&(volume0<4)) control0 |= 0x04; | |
| if ((volume1!=0)&&(volume1<4)) value0 |= 0x04; | |
| if (channel0!=0) control0 |= 0x01; | |
| if (channel1==1) value0 |= 0x01; | |
| } | |
| else | |
| { | |
| value0=(volume0>volume1)?volume0:volume1; | |
| if (current_drive->drv_type<drv_211) | |
| { | |
| if (channel0!=0) | |
| { | |
| i=channel1; | |
| channel1=channel0; | |
| channel0=i; | |
| i=volume1; | |
| volume1=volume0; | |
| volume0=i; | |
| } | |
| if (channel0==channel1) | |
| { | |
| if (channel0==0) | |
| { | |
| channel1=1; | |
| volume1=0; | |
| volume0=value0; | |
| } | |
| else | |
| { | |
| channel0=0; | |
| volume0=0; | |
| volume1=value0; | |
| } | |
| } | |
| } | |
| if ((volume0!=0)&&(volume1!=0)) | |
| { | |
| if (volume0==0xFF) volume1=0xFF; | |
| else if (volume1==0xFF) volume0=0xFF; | |
| } | |
| else if (current_drive->drv_type<drv_201) volume0=volume1=value0; | |
| if (current_drive->drv_type>=drv_201) | |
| { | |
| if (volume0==0) control0 |= 0x80; | |
| if (volume1==0) control0 |= 0x40; | |
| } | |
| if (current_drive->drv_type>=drv_211) | |
| { | |
| if (channel0!=0) control0 |= 0x20; | |
| if (channel1!=1) control0 |= 0x10; | |
| } | |
| } | |
| drvcmd[0]=CMD0_SETMODE; | |
| drvcmd[1]=0x83; | |
| drvcmd[4]=control0; | |
| drvcmd[5]=value0; | |
| flags_cmd_out=f_putcmd|f_getsta|f_ResponseStatus|f_obey_p_check; | |
| } | |
| else if (famT_drive) | |
| { | |
| current_drive->volume_control=0; | |
| if (!volume0) current_drive->volume_control|=0x10; | |
| if (!volume1) current_drive->volume_control|=0x20; | |
| i=cc_prep_mode_T(); | |
| if (i<0) return (i); | |
| } | |
| if (!famT_drive) | |
| { | |
| response_count=0; | |
| i=cmd_out(); | |
| if (i<0) return (i); | |
| } | |
| current_drive->diskstate_flags |= volume_bit; | |
| return (0); | |
| } | |
| /*==========================================================================*/ | |
| static int GetStatus(void) | |
| { | |
| int i; | |
| if (famT_drive) return (0); | |
| flags_cmd_out=f_getsta|f_ResponseStatus|f_obey_p_check; | |
| response_count=0; | |
| cmd_type=0; | |
| i=cmd_out(); | |
| return (i); | |
| } | |
| /*==========================================================================*/ | |
| static int cc_DriveReset(void) | |
| { | |
| int i; | |
| msg(DBG_RES,"cc_DriveReset called.\n"); | |
| clr_cmdbuf(); | |
| response_count=0; | |
| if (fam0LV_drive) OUT(CDo_reset,0x00); | |
| else if (fam1_drive) | |
| { | |
| drvcmd[0]=CMD1_RESET; | |
| flags_cmd_out=f_putcmd; | |
| i=cmd_out(); | |
| } | |
| else if (fam2_drive) | |
| { | |
| drvcmd[0]=CMD2_RESET; | |
| flags_cmd_out=f_putcmd; | |
| i=cmd_out(); | |
| OUT(CDo_reset,0x00); | |
| } | |
| else if (famT_drive) | |
| { | |
| OUT(CDo_sel_i_d,0); | |
| OUT(CDo_enable,current_drive->drv_sel); | |
| OUT(CDo_command,CMDT_RESET); | |
| for (i=1;i<10;i++) OUT(CDo_command,0); | |
| } | |
| if (fam0LV_drive) sbp_sleep(5*HZ); /* wait 5 seconds */ | |
| else sbp_sleep(1*HZ); /* wait a second */ | |
| #if 1 | |
| if (famT_drive) | |
| { | |
| msg(DBG_TEA, "================CMDT_RESET given=================.\n"); | |
| sbp_sleep(3*HZ); | |
| } | |
| #endif /* 1 */ | |
| flush_status(); | |
| i=GetStatus(); | |
| if (i<0) return i; | |
| if (!famT_drive) | |
| if (current_drive->error_byte!=aud_12) return -501; | |
| return (0); | |
| } | |
| /*==========================================================================*/ | |
| static int SetSpeed(void) | |
| { | |
| int i, speed; | |
| if (!(current_drive->drv_options&(speed_auto|speed_300|speed_150))) return (0); | |
| speed=speed_auto; | |
| if (!(current_drive->drv_options&speed_auto)) | |
| { | |
| speed |= speed_300; | |
| if (!(current_drive->drv_options&speed_300)) speed=0; | |
| } | |
| i=cc_SetSpeed(speed,0,0); | |
| return (i); | |
| } | |
| static void switch_drive(struct sbpcd_drive *); | |
| static int sbpcd_select_speed(struct cdrom_device_info *cdi, int speed) | |
| { | |
| struct sbpcd_drive *p = cdi->handle; | |
| if (p != current_drive) | |
| switch_drive(p); | |
| return cc_SetSpeed(speed == 2 ? speed_300 : speed_150, 0, 0); | |
| } | |
| /*==========================================================================*/ | |
| static int DriveReset(void) | |
| { | |
| int i; | |
| i=cc_DriveReset(); | |
| if (i<0) return (-22); | |
| do | |
| { | |
| i=GetStatus(); | |
| if ((i<0)&&(i!=-ERR_DISKCHANGE)) { | |
| return (-2); /* from sta2err */ | |
| } | |
| if (!st_caddy_in) break; | |
| sbp_sleep(1); | |
| } | |
| while (!st_diskok); | |
| #if 000 | |
| current_drive->CD_changed=1; | |
| #endif | |
| if ((st_door_closed) && (st_caddy_in)) | |
| { | |
| i=DiskInfo(); | |
| if (i<0) return (-23); | |
| } | |
| return (0); | |
| } | |
| static int sbpcd_reset(struct cdrom_device_info *cdi) | |
| { | |
| struct sbpcd_drive *p = cdi->handle; | |
| if (p != current_drive) | |
| switch_drive(p); | |
| return DriveReset(); | |
| } | |
| /*==========================================================================*/ | |
| static int cc_PlayAudio(int pos_audio_start,int pos_audio_end) | |
| { | |
| int i, j, n; | |
| if (current_drive->audio_state==audio_playing) return (-EINVAL); | |
| clr_cmdbuf(); | |
| response_count=0; | |
| if (famLV_drive) | |
| { | |
| drvcmd[0]=CMDL_PLAY; | |
| i=msf2blk(pos_audio_start); | |
| n=msf2blk(pos_audio_end)+1-i; | |
| drvcmd[1]=(i>>16)&0x00FF; | |
| drvcmd[2]=(i>>8)&0x00FF; | |
| drvcmd[3]=i&0x00FF; | |
| drvcmd[4]=(n>>16)&0x00FF; | |
| drvcmd[5]=(n>>8)&0x00FF; | |
| drvcmd[6]=n&0x00FF; | |
| if (famL_drive) | |
| flags_cmd_out = f_putcmd | f_respo2 | f_lopsta | f_getsta | | |
| f_ResponseStatus | f_obey_p_check | f_wait_if_busy; | |
| else | |
| flags_cmd_out = f_putcmd; | |
| } | |
| else | |
| { | |
| j=1; | |
| if (fam1_drive) | |
| { | |
| drvcmd[0]=CMD1_PLAY_MSF; | |
| flags_cmd_out = f_putcmd | f_respo2 | f_ResponseStatus | | |
| f_obey_p_check | f_wait_if_busy; | |
| } | |
| else if (fam2_drive) | |
| { | |
| drvcmd[0]=CMD2_PLAY_MSF; | |
| flags_cmd_out = f_putcmd | f_ResponseStatus | f_obey_p_check; | |
| } | |
| else if (famT_drive) | |
| { | |
| drvcmd[0]=CMDT_PLAY_MSF; | |
| j=3; | |
| response_count=1; | |
| } | |
| else if (fam0_drive) | |
| { | |
| drvcmd[0]=CMD0_PLAY_MSF; | |
| flags_cmd_out = f_putcmd | f_respo2 | f_lopsta | f_getsta | | |
| f_ResponseStatus | f_obey_p_check | f_wait_if_busy; | |
| } | |
| drvcmd[j]=(pos_audio_start>>16)&0x00FF; | |
| drvcmd[j+1]=(pos_audio_start>>8)&0x00FF; | |
| drvcmd[j+2]=pos_audio_start&0x00FF; | |
| drvcmd[j+3]=(pos_audio_end>>16)&0x00FF; | |
| drvcmd[j+4]=(pos_audio_end>>8)&0x00FF; | |
| drvcmd[j+5]=pos_audio_end&0x00FF; | |
| } | |
| i=cmd_out(); | |
| return (i); | |
| } | |
| /*==========================================================================*/ | |
| static int cc_Pause_Resume(int pau_res) | |
| { | |
| int i; | |
| clr_cmdbuf(); | |
| response_count=0; | |
| if (fam1_drive) | |
| { | |
| drvcmd[0]=CMD1_PAU_RES; | |
| if (pau_res!=1) drvcmd[1]=0x80; | |
| flags_cmd_out=f_putcmd|f_respo2|f_ResponseStatus|f_obey_p_check; | |
| } | |
| else if (fam2_drive) | |
| { | |
| drvcmd[0]=CMD2_PAU_RES; | |
| if (pau_res!=1) drvcmd[2]=0x01; | |
| flags_cmd_out=f_putcmd|f_ResponseStatus; | |
| } | |
| else if (fam0LV_drive) | |
| { | |
| drvcmd[0]=CMD0_PAU_RES; | |
| if (pau_res!=1) drvcmd[1]=0x80; | |
| if (famL_drive) | |
| flags_cmd_out=f_putcmd|f_respo2|f_lopsta|f_getsta|f_ResponseStatus| | |
| f_obey_p_check|f_bit1; | |
| else if (famV_drive) | |
| flags_cmd_out=f_putcmd; | |
| else | |
| flags_cmd_out=f_putcmd|f_respo2|f_lopsta|f_getsta|f_ResponseStatus| | |
| f_obey_p_check; | |
| } | |
| else if (famT_drive) | |
| { | |
| if (pau_res==3) return (cc_PlayAudio(current_drive->pos_audio_start,current_drive->pos_audio_end)); | |
| else if (pau_res==1) drvcmd[0]=CMDT_PAUSE; | |
| else return (-56); | |
| } | |
| i=cmd_out(); | |
| return (i); | |
| } | |
| /*==========================================================================*/ | |
| static int cc_LockDoor(char lock) | |
| { | |
| int i; | |
| if (fam0_drive) return (0); | |
| msg(DBG_LCK,"cc_LockDoor: %d (drive %d)\n", lock, current_drive - D_S); | |
| msg(DBG_LCS,"p_door_locked bit %d before\n", st_door_locked); | |
| clr_cmdbuf(); | |
| response_count=0; | |
| if (fam1_drive) | |
| { | |
| drvcmd[0]=CMD1_LOCK_CTL; | |
| if (lock==1) drvcmd[1]=0x01; | |
| flags_cmd_out=f_putcmd|f_ResponseStatus|f_obey_p_check; | |
| } | |
| else if (fam2_drive) | |
| { | |
| drvcmd[0]=CMD2_LOCK_CTL; | |
| if (lock==1) drvcmd[4]=0x01; | |
| flags_cmd_out=f_putcmd|f_ResponseStatus; | |
| } | |
| else if (famLV_drive) | |
| { | |
| drvcmd[0]=CMDL_LOCK_CTL; | |
| if (lock==1) drvcmd[1]=0x01; | |
| if (famL_drive) | |
| flags_cmd_out=f_putcmd|f_respo2|f_lopsta|f_getsta|f_ResponseStatus|f_obey_p_check|f_bit1; | |
| else | |
| flags_cmd_out=f_putcmd; | |
| } | |
| else if (famT_drive) | |
| { | |
| drvcmd[0]=CMDT_LOCK_CTL; | |
| if (lock==1) drvcmd[4]=0x01; | |
| } | |
| i=cmd_out(); | |
| msg(DBG_LCS,"p_door_locked bit %d after\n", st_door_locked); | |
| return (i); | |
| } | |
| /*==========================================================================*/ | |
| /*==========================================================================*/ | |
| static int UnLockDoor(void) | |
| { | |
| int i,j; | |
| j=20; | |
| do | |
| { | |
| i=cc_LockDoor(0); | |
| --j; | |
| sbp_sleep(1); | |
| } | |
| while ((i<0)&&(j)); | |
| if (i<0) | |
| { | |
| cc_DriveReset(); | |
| return -84; | |
| } | |
| return (0); | |
| } | |
| /*==========================================================================*/ | |
| static int LockDoor(void) | |
| { | |
| int i,j; | |
| j=20; | |
| do | |
| { | |
| i=cc_LockDoor(1); | |
| --j; | |
| sbp_sleep(1); | |
| } | |
| while ((i<0)&&(j)); | |
| if (j==0) | |
| { | |
| cc_DriveReset(); | |
| j=20; | |
| do | |
| { | |
| i=cc_LockDoor(1); | |
| --j; | |
| sbp_sleep(1); | |
| } | |
| while ((i<0)&&(j)); | |
| } | |
| return (i); | |
| } | |
| static int sbpcd_lock_door(struct cdrom_device_info *cdi, int lock) | |
| { | |
| return lock ? LockDoor() : UnLockDoor(); | |
| } | |
| /*==========================================================================*/ | |
| static int cc_CloseTray(void) | |
| { | |
| int i; | |
| if (fam0_drive) return (0); | |
| msg(DBG_LCK,"cc_CloseTray (drive %d)\n", current_drive - D_S); | |
| msg(DBG_LCS,"p_door_closed bit %d before\n", st_door_closed); | |
| clr_cmdbuf(); | |
| response_count=0; | |
| if (fam1_drive) | |
| { | |
| drvcmd[0]=CMD1_TRAY_CTL; | |
| flags_cmd_out=f_putcmd|f_respo2|f_ResponseStatus|f_obey_p_check; | |
| } | |
| else if (fam2_drive) | |
| { | |
| drvcmd[0]=CMD2_TRAY_CTL; | |
| drvcmd[1]=0x01; | |
| drvcmd[4]=0x03; /* "insert" */ | |
| flags_cmd_out=f_putcmd|f_ResponseStatus; | |
| } | |
| else if (famLV_drive) | |
| { | |
| drvcmd[0]=CMDL_TRAY_CTL; | |
| if (famLV_drive) | |
| flags_cmd_out=f_putcmd|f_respo2|f_lopsta|f_getsta| | |
| f_ResponseStatus|f_obey_p_check|f_bit1; | |
| else | |
| flags_cmd_out=f_putcmd; | |
| } | |
| else if (famT_drive) | |
| { | |
| drvcmd[0]=CMDT_TRAY_CTL; | |
| drvcmd[4]=0x03; /* "insert" */ | |
| } | |
| i=cmd_out(); | |
| msg(DBG_LCS,"p_door_closed bit %d after\n", st_door_closed); | |
| i=cc_ReadError(); | |
| flags_cmd_out |= f_respo2; | |
| cc_ReadStatus(); /* command: give 1-byte status */ | |
| i=ResponseStatus(); | |
| if (famT_drive&&(i<0)) | |
| { | |
| cc_DriveReset(); | |
| i=ResponseStatus(); | |
| #if 0 | |
| sbp_sleep(HZ); | |
| #endif /* 0 */ | |
| i=ResponseStatus(); | |
| } | |
| if (i<0) | |
| { | |
| msg(DBG_INF,"sbpcd cc_CloseTray: ResponseStatus timed out (%d).\n",i); | |
| } | |
| if (!(famT_drive)) | |
| { | |
| if (!st_spinning) | |
| { | |
| cc_SpinUp(); | |
| if (st_check) i=cc_ReadError(); | |
| flags_cmd_out |= f_respo2; | |
| cc_ReadStatus(); | |
| i=ResponseStatus(); | |
| } else { | |
| } | |
| } | |
| i=DiskInfo(); | |
| return (i); | |
| } | |
| static int sbpcd_tray_move(struct cdrom_device_info *cdi, int position) | |
| { | |
| int retval=0; | |
| switch_drive(cdi->handle); | |
| /* DUH! --AJK */ | |
| if(current_drive->CD_changed != 0xFF) { | |
| current_drive->CD_changed=0xFF; | |
| current_drive->diskstate_flags &= ~cd_size_bit; | |
| } | |
| if (position == 1) { | |
| cc_SpinDown(); | |
| } else { | |
| retval=cc_CloseTray(); | |
| } | |
| return retval; | |
| } | |
| /*==========================================================================*/ | |
| static int cc_ReadSubQ(void) | |
| { | |
| int i,j; | |
| current_drive->diskstate_flags &= ~subq_bit; | |
| for (j=255;j>0;j--) | |
| { | |
| clr_cmdbuf(); | |
| if (fam1_drive) | |
| { | |
| drvcmd[0]=CMD1_READSUBQ; | |
| flags_cmd_out=f_putcmd|f_ResponseStatus|f_obey_p_check; | |
| response_count=11; | |
| } | |
| else if (fam2_drive) | |
| { | |
| drvcmd[0]=CMD2_READSUBQ; | |
| drvcmd[1]=0x02; | |
| drvcmd[3]=0x01; | |
| flags_cmd_out=f_putcmd; | |
| response_count=10; | |
| } | |
| else if (fam0LV_drive) | |
| { | |
| drvcmd[0]=CMD0_READSUBQ; | |
| drvcmd[1]=0x02; | |
| if (famLV_drive) | |
| flags_cmd_out=f_putcmd; | |
| else | |
| flags_cmd_out=f_putcmd|f_getsta|f_ResponseStatus|f_obey_p_check; | |
| response_count=13; | |
| } | |
| else if (famT_drive) | |
| { | |
| response_count=12; | |
| drvcmd[0]=CMDT_READSUBQ; | |
| drvcmd[1]=0x02; | |
| drvcmd[2]=0x40; | |
| drvcmd[3]=0x01; | |
| drvcmd[8]=response_count; | |
| } | |
| i=cmd_out(); | |
| if (i<0) return (i); | |
| for (i=0;i<response_count;i++) | |
| { | |
| sprintf(&msgbuf[i*3], " %02X", infobuf[i]); | |
| msgbuf[i*3]=0; | |
| msg(DBG_SQ1,"cc_ReadSubQ:%s\n", msgbuf); | |
| } | |
| if (famT_drive) break; | |
| if (infobuf[0]!=0) break; | |
| if ((!st_spinning) || (j==1)) | |
| { | |
| current_drive->SubQ_ctl_adr=current_drive->SubQ_trk=current_drive->SubQ_pnt_idx=current_drive->SubQ_whatisthis=0; | |
| current_drive->SubQ_run_tot=current_drive->SubQ_run_trk=0; | |
| return (0); | |
| } | |
| } | |
| if (famT_drive) current_drive->SubQ_ctl_adr=infobuf[1]; | |
| else current_drive->SubQ_ctl_adr=swap_nibbles(infobuf[1]); | |
| current_drive->SubQ_trk=byt2bcd(infobuf[2]); | |
| current_drive->SubQ_pnt_idx=byt2bcd(infobuf[3]); | |
| if (fam0LV_drive) i=5; | |
| else if (fam12_drive) i=4; | |
| else if (famT_drive) i=8; | |
| current_drive->SubQ_run_tot=make32(make16(0,infobuf[i]),make16(infobuf[i+1],infobuf[i+2])); /* msf-bin */ | |
| i=7; | |
| if (fam0LV_drive) i=9; | |
| else if (fam12_drive) i=7; | |
| else if (famT_drive) i=4; | |
| current_drive->SubQ_run_trk=make32(make16(0,infobuf[i]),make16(infobuf[i+1],infobuf[i+2])); /* msf-bin */ | |
| current_drive->SubQ_whatisthis=infobuf[i+3]; | |
| current_drive->diskstate_flags |= subq_bit; | |
| return (0); | |
| } | |
| /*==========================================================================*/ | |
| static int cc_ModeSense(void) | |
| { | |
| int i; | |
| if (fam2_drive) return (0); | |
| if (famV_drive) return (0); | |
| current_drive->diskstate_flags &= ~frame_size_bit; | |
| clr_cmdbuf(); | |
| if (fam1_drive) | |
| { | |
| response_count=5; | |
| drvcmd[0]=CMD1_GETMODE; | |
| flags_cmd_out=f_putcmd|f_ResponseStatus|f_obey_p_check; | |
| } | |
| else if (fam0L_drive) | |
| { | |
| response_count=2; | |
| drvcmd[0]=CMD0_GETMODE; | |
| if (famL_drive) flags_cmd_out=f_putcmd; | |
| else flags_cmd_out=f_putcmd|f_getsta|f_ResponseStatus|f_obey_p_check; | |
| } | |
| else if (famT_drive) | |
| { | |
| response_count=10; | |
| drvcmd[0]=CMDT_GETMODE; | |
| drvcmd[4]=response_count; | |
| } | |
| i=cmd_out(); | |
| if (i<0) return (i); | |
| i=0; | |
| current_drive->sense_byte=0; | |
| if (fam1_drive) current_drive->sense_byte=infobuf[i++]; | |
| else if (famT_drive) | |
| { | |
| if (infobuf[4]==0x01) current_drive->xa_byte=0x20; | |
| else current_drive->xa_byte=0; | |
| i=2; | |
| } | |
| current_drive->frame_size=make16(infobuf[i],infobuf[i+1]); | |
| for (i=0;i<response_count;i++) | |
| sprintf(&msgbuf[i*3], " %02X", infobuf[i]); | |
| msgbuf[i*3]=0; | |
| msg(DBG_XA1,"cc_ModeSense:%s\n", msgbuf); | |
| current_drive->diskstate_flags |= frame_size_bit; | |
| return (0); | |
| } | |
| /*==========================================================================*/ | |
| /*==========================================================================*/ | |
| static int cc_ModeSelect(int framesize) | |
| { | |
| int i; | |
| if (fam2_drive) return (0); | |
| if (famV_drive) return (0); | |
| current_drive->diskstate_flags &= ~frame_size_bit; | |
| clr_cmdbuf(); | |
| current_drive->frame_size=framesize; | |
| if (framesize==CD_FRAMESIZE_RAW) current_drive->sense_byte=0x82; | |
| else current_drive->sense_byte=0x00; | |
| msg(DBG_XA1,"cc_ModeSelect: %02X %04X\n", | |
| current_drive->sense_byte, current_drive->frame_size); | |
| if (fam1_drive) | |
| { | |
| drvcmd[0]=CMD1_SETMODE; | |
| drvcmd[1]=0x00; | |
| drvcmd[2]=current_drive->sense_byte; | |
| drvcmd[3]=(current_drive->frame_size>>8)&0xFF; | |
| drvcmd[4]=current_drive->frame_size&0xFF; | |
| flags_cmd_out=f_putcmd|f_ResponseStatus|f_obey_p_check; | |
| } | |
| else if (fam0L_drive) | |
| { | |
| drvcmd[0]=CMD0_SETMODE; | |
| drvcmd[1]=0x00; | |
| drvcmd[2]=(current_drive->frame_size>>8)&0xFF; | |
| drvcmd[3]=current_drive->frame_size&0xFF; | |
| drvcmd[4]=0x00; | |
| if(famL_drive) | |
| flags_cmd_out=f_putcmd|f_lopsta|f_getsta|f_ResponseStatus|f_obey_p_check; | |
| else | |
| flags_cmd_out=f_putcmd|f_getsta|f_ResponseStatus|f_obey_p_check; | |
| } | |
| else if (famT_drive) | |
| { | |
| return (-1); | |
| } | |
| response_count=0; | |
| i=cmd_out(); | |
| if (i<0) return (i); | |
| current_drive->diskstate_flags |= frame_size_bit; | |
| return (0); | |
| } | |
| /*==========================================================================*/ | |
| static int cc_GetVolume(void) | |
| { | |
| int i; | |
| u_char switches; | |
| u_char chan0=0; | |
| u_char vol0=0; | |
| u_char chan1=1; | |
| u_char vol1=0; | |
| if (famV_drive) return (0); | |
| current_drive->diskstate_flags &= ~volume_bit; | |
| clr_cmdbuf(); | |
| if (fam1_drive) | |
| { | |
| drvcmd[0]=CMD1_GETMODE; | |
| drvcmd[1]=0x05; | |
| response_count=5; | |
| flags_cmd_out=f_putcmd|f_ResponseStatus|f_obey_p_check; | |
| } | |
| else if (fam2_drive) | |
| { | |
| drvcmd[0]=CMD2_GETMODE; | |
| drvcmd[1]=0x0E; | |
| response_count=5; | |
| flags_cmd_out=f_putcmd; | |
| } | |
| else if (fam0L_drive) | |
| { | |
| drvcmd[0]=CMD0_GETMODE; | |
| drvcmd[1]=0x03; | |
| response_count=2; | |
| if(famL_drive) | |
| flags_cmd_out=f_putcmd; | |
| else | |
| flags_cmd_out=f_putcmd|f_getsta|f_ResponseStatus|f_obey_p_check; | |
| } | |
| else if (famT_drive) | |
| { | |
| i=cc_get_mode_T(); | |
| if (i<0) return (i); | |
| } | |
| if (!famT_drive) | |
| { | |
| i=cmd_out(); | |
| if (i<0) return (i); | |
| } | |
| if (fam1_drive) | |
| { | |
| chan0=infobuf[1]&0x0F; | |
| vol0=infobuf[2]; | |
| chan1=infobuf[3]&0x0F; | |
| vol1=infobuf[4]; | |
| if (chan0==0) | |
| { | |
| chan0=1; | |
| vol0=0; | |
| } | |
| if (chan1==0) | |
| { | |
| chan1=2; | |
| vol1=0; | |
| } | |
| chan0 >>= 1; | |
| chan1 >>= 1; | |
| } | |
| else if (fam2_drive) | |
| { | |
| chan0=infobuf[1]; | |
| vol0=infobuf[2]; | |
| chan1=infobuf[3]; | |
| vol1=infobuf[4]; | |
| } | |
| else if (famL_drive) | |
| { | |
| chan0=0; | |
| chan1=1; | |
| vol0=vol1=infobuf[1]; | |
| switches=infobuf[0]; | |
| if ((switches&0x80)!=0) chan0=1; | |
| if ((switches&0x40)!=0) chan1=0; | |
| } | |
| else if (fam0_drive) /* different firmware levels */ | |
| { | |
| chan0=0; | |
| chan1=1; | |
| vol0=vol1=infobuf[1]; | |
| if (current_drive->drv_type>=drv_201) | |
| { | |
| if (current_drive->drv_type<drv_300) | |
| { | |
| switches=infobuf[0]; | |
| if ((switches&0x80)!=0) vol0=0; | |
| if ((switches&0x40)!=0) vol1=0; | |
| if (current_drive->drv_type>=drv_211) | |
| { | |
| if ((switches&0x20)!=0) chan0=1; | |
| if ((switches&0x10)!=0) chan1=0; | |
| } | |
| } | |
| else | |
| { | |
| vol0=infobuf[0]; | |
| if ((vol0&0x01)!=0) chan0=1; | |
| if ((vol1&0x01)==0) chan1=0; | |
| vol0 &= 0xFC; | |
| vol1 &= 0xFC; | |
| if (vol0!=0) vol0 += 3; | |
| if (vol1!=0) vol1 += 3; | |
| } | |
| } | |
| } | |
| else if (famT_drive) | |
| { | |
| current_drive->volume_control=infobuf[7]; | |
| chan0=0; | |
| chan1=1; | |
| if (current_drive->volume_control&0x10) vol0=0; | |
| else vol0=0xff; | |
| if (current_drive->volume_control&0x20) vol1=0; | |
| else vol1=0xff; | |
| } | |
| current_drive->vol_chan0=chan0; | |
| current_drive->vol_ctrl0=vol0; | |
| current_drive->vol_chan1=chan1; | |
| current_drive->vol_ctrl1=vol1; | |
| #if 000 | |
| current_drive->vol_chan2=2; | |
| current_drive->vol_ctrl2=0xFF; | |
| current_drive->vol_chan3=3; | |
| current_drive->vol_ctrl3=0xFF; | |
| #endif /* 000 */ | |
| current_drive->diskstate_flags |= volume_bit; | |
| return (0); | |
| } | |
| /*==========================================================================*/ | |
| static int cc_ReadCapacity(void) | |
| { | |
| int i, j; | |
| if (fam2_drive) return (0); /* some firmware lacks this command */ | |
| if (famLV_drive) return (0); /* some firmware lacks this command */ | |
| if (famT_drive) return (0); /* done with cc_ReadTocDescr() */ | |
| current_drive->diskstate_flags &= ~cd_size_bit; | |
| for (j=3;j>0;j--) | |
| { | |
| clr_cmdbuf(); | |
| if (fam1_drive) | |
| { | |
| drvcmd[0]=CMD1_CAPACITY; | |
| response_count=5; | |
| flags_cmd_out=f_putcmd|f_ResponseStatus|f_obey_p_check; | |
| } | |
| #if 00 | |
| else if (fam2_drive) | |
| { | |
| drvcmd[0]=CMD2_CAPACITY; | |
| response_count=8; | |
| flags_cmd_out=f_putcmd; | |
| } | |
| #endif | |
| else if (fam0_drive) | |
| { | |
| drvcmd[0]=CMD0_CAPACITY; | |
| response_count=5; | |
| flags_cmd_out=f_putcmd|f_getsta|f_ResponseStatus|f_obey_p_check; | |
| } | |
| i=cmd_out(); | |
| if (i>=0) break; | |
| msg(DBG_000,"cc_ReadCapacity: cmd_out: err %d\n", i); | |
| cc_ReadError(); | |
| } | |
| if (j==0) return (i); | |
| if (fam1_drive) current_drive->CDsize_frm=msf2blk(make32(make16(0,infobuf[0]),make16(infobuf[1],infobuf[2])))+CD_MSF_OFFSET; | |
| else if (fam0_drive) current_drive->CDsize_frm=make32(make16(0,infobuf[0]),make16(infobuf[1],infobuf[2])); | |
| #if 00 | |
| else if (fam2_drive) current_drive->CDsize_frm=make32(make16(infobuf[0],infobuf[1]),make16(infobuf[2],infobuf[3])); | |
| #endif | |
| current_drive->diskstate_flags |= cd_size_bit; | |
| msg(DBG_000,"cc_ReadCapacity: %d frames.\n", current_drive->CDsize_frm); | |
| return (0); | |
| } | |
| /*==========================================================================*/ | |
| static int cc_ReadTocDescr(void) | |
| { | |
| int i; | |
| current_drive->diskstate_flags &= ~toc_bit; | |
| clr_cmdbuf(); | |
| if (fam1_drive) | |
| { | |
| drvcmd[0]=CMD1_DISKINFO; | |
| response_count=6; | |
| flags_cmd_out=f_putcmd|f_ResponseStatus|f_obey_p_check; | |
| } | |
| else if (fam0LV_drive) | |
| { | |
| drvcmd[0]=CMD0_DISKINFO; | |
| response_count=6; | |
| if(famLV_drive) | |
| flags_cmd_out=f_putcmd; | |
| else | |
| flags_cmd_out=f_putcmd|f_getsta|f_ResponseStatus|f_obey_p_check; | |
| } | |
| else if (fam2_drive) | |
| { | |
| /* possibly longer timeout periods necessary */ | |
| current_drive->f_multisession=0; | |
| drvcmd[0]=CMD2_DISKINFO; | |
| drvcmd[1]=0x02; | |
| drvcmd[2]=0xAB; | |
| drvcmd[3]=0xFF; /* session */ | |
| response_count=8; | |
| flags_cmd_out=f_putcmd; | |
| } | |
| else if (famT_drive) | |
| { | |
| current_drive->f_multisession=0; | |
| response_count=12; | |
| drvcmd[0]=CMDT_DISKINFO; | |
| drvcmd[1]=0x02; | |
| drvcmd[6]=CDROM_LEADOUT; | |
| drvcmd[8]=response_count; | |
| drvcmd[9]=0x00; | |
| } | |
| i=cmd_out(); | |
| if (i<0) return (i); | |
| if ((famT_drive)&&(i<response_count)) return (-100-i); | |
| if ((fam1_drive)||(fam2_drive)||(fam0LV_drive)) | |
| current_drive->xa_byte=infobuf[0]; | |
| if (fam2_drive) | |
| { | |
| current_drive->first_session=infobuf[1]; | |
| current_drive->last_session=infobuf[2]; | |
| current_drive->n_first_track=infobuf[3]; | |
| current_drive->n_last_track=infobuf[4]; | |
| if (current_drive->first_session!=current_drive->last_session) | |
| { | |
| current_drive->f_multisession=1; | |
| current_drive->lba_multi=msf2blk(make32(make16(0,infobuf[5]),make16(infobuf[6],infobuf[7]))); | |
| } | |
| #if 0 | |
| if (current_drive->first_session!=current_drive->last_session) | |
| { | |
| if (current_drive->last_session<=20) | |
| zwanzig=current_drive->last_session+1; | |
| else zwanzig=20; | |
| for (count=current_drive->first_session;count<zwanzig;count++) | |
| { | |
| drvcmd[0]=CMD2_DISKINFO; | |
| drvcmd[1]=0x02; | |
| drvcmd[2]=0xAB; | |
| drvcmd[3]=count; | |
| response_count=8; | |
| flags_cmd_out=f_putcmd; | |
| i=cmd_out(); | |
| if (i<0) return (i); | |
| current_drive->msf_multi_n[count]=make32(make16(0,infobuf[5]),make16(infobuf[6],infobuf[7])); | |
| } | |
| current_drive->diskstate_flags |= multisession_bit; | |
| } | |
| #endif | |
| drvcmd[0]=CMD2_DISKINFO; | |
| drvcmd[1]=0x02; | |
| drvcmd[2]=0xAA; | |
| drvcmd[3]=0xFF; | |
| response_count=5; | |
| flags_cmd_out=f_putcmd; | |
| i=cmd_out(); | |
| if (i<0) return (i); | |
| current_drive->size_msf=make32(make16(0,infobuf[2]),make16(infobuf[3],infobuf[4])); | |
| current_drive->size_blk=msf2blk(current_drive->size_msf); | |
| current_drive->CDsize_frm=current_drive->size_blk+1; | |
| } | |
| else if (famT_drive) | |
| { | |
| current_drive->size_msf=make32(make16(infobuf[8],infobuf[9]),make16(infobuf[10],infobuf[11])); | |
| current_drive->size_blk=msf2blk(current_drive->size_msf); | |
| current_drive->CDsize_frm=current_drive->size_blk+1; | |
| current_drive->n_first_track=infobuf[2]; | |
| current_drive->n_last_track=infobuf[3]; | |
| } | |
| else | |
| { | |
| current_drive->n_first_track=infobuf[1]; | |
| current_drive->n_last_track=infobuf[2]; | |
| current_drive->size_msf=make32(make16(0,infobuf[3]),make16(infobuf[4],infobuf[5])); | |
| current_drive->size_blk=msf2blk(current_drive->size_msf); | |
| if (famLV_drive) current_drive->CDsize_frm=current_drive->size_blk+1; | |
| } | |
| current_drive->diskstate_flags |= toc_bit; | |
| msg(DBG_TOC,"TocDesc: xa %02X firstt %02X lastt %02X size %08X firstses %02X lastsess %02X\n", | |
| current_drive->xa_byte, | |
| current_drive->n_first_track, | |
| current_drive->n_last_track, | |
| current_drive->size_msf, | |
| current_drive->first_session, | |
| current_drive->last_session); | |
| return (0); | |
| } | |
| /*==========================================================================*/ | |
| static int cc_ReadTocEntry(int num) | |
| { | |
| int i; | |
| clr_cmdbuf(); | |
| if (fam1_drive) | |
| { | |
| drvcmd[0]=CMD1_READTOC; | |
| drvcmd[2]=num; | |
| response_count=8; | |
| flags_cmd_out=f_putcmd|f_ResponseStatus|f_obey_p_check; | |
| } | |
| else if (fam2_drive) | |
| { | |
| /* possibly longer timeout periods necessary */ | |
| drvcmd[0]=CMD2_DISKINFO; | |
| drvcmd[1]=0x02; | |
| drvcmd[2]=num; | |
| response_count=5; | |
| flags_cmd_out=f_putcmd; | |
| } | |
| else if (fam0LV_drive) | |
| { | |
| drvcmd[0]=CMD0_READTOC; | |
| drvcmd[1]=0x02; | |
| drvcmd[2]=num; | |
| response_count=8; | |
| if (famLV_drive) | |
| flags_cmd_out=f_putcmd; | |
| else | |
| flags_cmd_out=f_putcmd|f_getsta|f_ResponseStatus|f_obey_p_check; | |
| } | |
| else if (famT_drive) | |
| { | |
| response_count=12; | |
| drvcmd[0]=CMDT_DISKINFO; | |
| drvcmd[1]=0x02; | |
| drvcmd[6]=num; | |
| drvcmd[8]=response_count; | |
| drvcmd[9]=0x00; | |
| } | |
| i=cmd_out(); | |
| if (i<0) return (i); | |
| if ((famT_drive)&&(i<response_count)) return (-100-i); | |
| if ((fam1_drive)||(fam0LV_drive)) | |
| { | |
| current_drive->TocEnt_nixbyte=infobuf[0]; | |
| i=1; | |
| } | |
| else if (fam2_drive) i=0; | |
| else if (famT_drive) i=5; | |
| current_drive->TocEnt_ctl_adr=swap_nibbles(infobuf[i++]); | |
| if ((fam1_drive)||(fam0L_drive)) | |
| { | |
| current_drive->TocEnt_number=infobuf[i++]; | |
| current_drive->TocEnt_format=infobuf[i]; | |
| } | |
| else | |
| { | |
| current_drive->TocEnt_number=num; | |
| current_drive->TocEnt_format=0; | |
| } | |
| if (fam1_drive) i=4; | |
| else if (fam0LV_drive) i=5; | |
| else if (fam2_drive) i=2; | |
| else if (famT_drive) i=9; | |
| current_drive->TocEnt_address=make32(make16(0,infobuf[i]), | |
| make16(infobuf[i+1],infobuf[i+2])); | |
| for (i=0;i<response_count;i++) | |
| sprintf(&msgbuf[i*3], " %02X", infobuf[i]); | |
| msgbuf[i*3]=0; | |
| msg(DBG_ECS,"TocEntry:%s\n", msgbuf); | |
| msg(DBG_TOC,"TocEntry: %02X %02X %02X %02X %08X\n", | |
| current_drive->TocEnt_nixbyte, current_drive->TocEnt_ctl_adr, | |
| current_drive->TocEnt_number, current_drive->TocEnt_format, | |
| current_drive->TocEnt_address); | |
| return (0); | |
| } | |
| /*==========================================================================*/ | |
| static int cc_ReadPacket(void) | |
| { | |
| int i; | |
| clr_cmdbuf(); | |
| drvcmd[0]=CMD0_PACKET; | |
| drvcmd[1]=response_count; | |
| if(famL_drive) flags_cmd_out=f_putcmd; | |
| else if (fam01_drive) | |
| flags_cmd_out=f_putcmd|f_getsta|f_ResponseStatus|f_obey_p_check; | |
| else if (fam2_drive) return (-1); /* not implemented yet */ | |
| else if (famT_drive) | |
| { | |
| return (-1); | |
| } | |
| i=cmd_out(); | |
| return (i); | |
| } | |
| /*==========================================================================*/ | |
| static int convert_UPC(u_char *p) | |
| { | |
| int i; | |
| p++; | |
| if (fam0L_drive) p[13]=0; | |
| for (i=0;i<7;i++) | |
| { | |
| if (fam1_drive) current_drive->UPC_buf[i]=swap_nibbles(*p++); | |
| else if (fam0L_drive) | |
| { | |
| current_drive->UPC_buf[i]=((*p++)<<4)&0xFF; | |
| current_drive->UPC_buf[i] |= *p++; | |
| } | |
| else if (famT_drive) | |
| { | |
| return (-1); | |
| } | |
| else /* CD200 */ | |
| { | |
| return (-1); | |
| } | |
| } | |
| current_drive->UPC_buf[6] &= 0xF0; | |
| return (0); | |
| } | |
| /*==========================================================================*/ | |
| static int cc_ReadUPC(void) | |
| { | |
| int i; | |
| #if TEST_UPC | |
| int block, checksum; | |
| #endif /* TEST_UPC */ | |
| if (fam2_drive) return (0); /* not implemented yet */ | |
| if (famT_drive) return (0); /* not implemented yet */ | |
| if (famV_drive) return (0); /* not implemented yet */ | |
| #if 1 | |
| if (fam0_drive) return (0); /* but it should work */ | |
| #endif | |
| current_drive->diskstate_flags &= ~upc_bit; | |
| #if TEST_UPC | |
| for (block=CD_MSF_OFFSET+1;block<CD_MSF_OFFSET+200;block++) | |
| { | |
| #endif /* TEST_UPC */ | |
| clr_cmdbuf(); | |
| if (fam1_drive) | |
| { | |
| drvcmd[0]=CMD1_READ_UPC; | |
| #if TEST_UPC | |
| drvcmd[1]=(block>>16)&0xFF; | |
| drvcmd[2]=(block>>8)&0xFF; | |
| drvcmd[3]=block&0xFF; | |
| #endif /* TEST_UPC */ | |
| response_count=8; | |
| flags_cmd_out=f_putcmd|f_ResponseStatus|f_obey_p_check; | |
| } | |
| else if (fam0L_drive) | |
| { | |
| drvcmd[0]=CMD0_READ_UPC; | |
| #if TEST_UPC | |
| drvcmd[2]=(block>>16)&0xFF; | |
| drvcmd[3]=(block>>8)&0xFF; | |
| drvcmd[4]=block&0xFF; | |
| #endif /* TEST_UPC */ | |
| response_count=0; | |
| flags_cmd_out=f_putcmd|f_lopsta|f_getsta|f_ResponseStatus|f_obey_p_check|f_bit1; | |
| } | |
| else if (fam2_drive) | |
| { | |
| return (-1); | |
| } | |
| else if (famT_drive) | |
| { | |
| return (-1); | |
| } | |
| i=cmd_out(); | |
| if (i<0) | |
| { | |
| msg(DBG_000,"cc_ReadUPC cmd_out: err %d\n", i); | |
| return (i); | |
| } | |
| if (fam0L_drive) | |
| { | |
| response_count=16; | |
| if (famL_drive) flags_cmd_out=f_putcmd; | |
| i=cc_ReadPacket(); | |
| if (i<0) | |
| { | |
| msg(DBG_000,"cc_ReadUPC ReadPacket: err %d\n", i); | |
| return (i); | |
| } | |
| } | |
| #if TEST_UPC | |
| checksum=0; | |
| #endif /* TEST_UPC */ | |
| for (i=0;i<(fam1_drive?8:16);i++) | |
| { | |
| #if TEST_UPC | |
| checksum |= infobuf[i]; | |
| #endif /* TEST_UPC */ | |
| sprintf(&msgbuf[i*3], " %02X", infobuf[i]); | |
| } | |
| msgbuf[i*3]=0; | |
| msg(DBG_UPC,"UPC info:%s\n", msgbuf); | |
| #if TEST_UPC | |
| if ((checksum&0x7F)!=0) break; | |
| } | |
| #endif /* TEST_UPC */ | |
| current_drive->UPC_ctl_adr=0; | |
| if (fam1_drive) i=0; | |
| else i=2; | |
| if ((infobuf[i]&0x80)!=0) | |
| { | |
| convert_UPC(&infobuf[i]); | |
| current_drive->UPC_ctl_adr = (current_drive->TocEnt_ctl_adr & 0xF0) | 0x02; | |
| } | |
| for (i=0;i<7;i++) | |
| sprintf(&msgbuf[i*3], " %02X", current_drive->UPC_buf[i]); | |
| sprintf(&msgbuf[i*3], " (%02X)", current_drive->UPC_ctl_adr); | |
| msgbuf[i*3+5]=0; | |
| msg(DBG_UPC,"UPC code:%s\n", msgbuf); | |
| current_drive->diskstate_flags |= upc_bit; | |
| return (0); | |
| } | |
| static int sbpcd_get_mcn(struct cdrom_device_info *cdi, struct cdrom_mcn *mcn) | |
| { | |
| int i; | |
| unsigned char *mcnp = mcn->medium_catalog_number; | |
| unsigned char *resp; | |
| current_drive->diskstate_flags &= ~upc_bit; | |
| clr_cmdbuf(); | |
| if (fam1_drive) | |
| { | |
| drvcmd[0]=CMD1_READ_UPC; | |
| response_count=8; | |
| flags_cmd_out=f_putcmd|f_ResponseStatus|f_obey_p_check; | |
| } | |
| else if (fam0L_drive) | |
| { | |
| drvcmd[0]=CMD0_READ_UPC; | |
| response_count=0; | |
| flags_cmd_out=f_putcmd|f_lopsta|f_getsta|f_ResponseStatus|f_obey_p_check|f_bit1; | |
| } | |
| else if (fam2_drive) | |
| { | |
| return (-1); | |
| } | |
| else if (famT_drive) | |
| { | |
| return (-1); | |
| } | |
| i=cmd_out(); | |
| if (i<0) | |
| { | |
| msg(DBG_000,"cc_ReadUPC cmd_out: err %d\n", i); | |
| return (i); | |
| } | |
| if (fam0L_drive) | |
| { | |
| response_count=16; | |
| if (famL_drive) flags_cmd_out=f_putcmd; | |
| i=cc_ReadPacket(); | |
| if (i<0) | |
| { | |
| msg(DBG_000,"cc_ReadUPC ReadPacket: err %d\n", i); | |
| return (i); | |
| } | |
| } | |
| current_drive->UPC_ctl_adr=0; | |
| if (fam1_drive) i=0; | |
| else i=2; | |
| resp = infobuf + i; | |
| if (*resp++ == 0x80) { | |
| /* packed bcd to single ASCII digits */ | |
| *mcnp++ = (*resp >> 4) + '0'; | |
| *mcnp++ = (*resp++ & 0x0f) + '0'; | |
| *mcnp++ = (*resp >> 4) + '0'; | |
| *mcnp++ = (*resp++ & 0x0f) + '0'; | |
| *mcnp++ = (*resp >> 4) + '0'; | |
| *mcnp++ = (*resp++ & 0x0f) + '0'; | |
| *mcnp++ = (*resp >> 4) + '0'; | |
| *mcnp++ = (*resp++ & 0x0f) + '0'; | |
| *mcnp++ = (*resp >> 4) + '0'; | |
| *mcnp++ = (*resp++ & 0x0f) + '0'; | |
| *mcnp++ = (*resp >> 4) + '0'; | |
| *mcnp++ = (*resp++ & 0x0f) + '0'; | |
| *mcnp++ = (*resp >> 4) + '0'; | |
| } | |
| *mcnp = '\0'; | |
| current_drive->diskstate_flags |= upc_bit; | |
| return (0); | |
| } | |
| /*==========================================================================*/ | |
| static int cc_CheckMultiSession(void) | |
| { | |
| int i; | |
| if (fam2_drive) return (0); | |
| current_drive->f_multisession=0; | |
| current_drive->lba_multi=0; | |
| if (fam0_drive) return (0); | |
| clr_cmdbuf(); | |
| if (fam1_drive) | |
| { | |
| drvcmd[0]=CMD1_MULTISESS; | |
| response_count=6; | |
| flags_cmd_out=f_putcmd|f_ResponseStatus|f_obey_p_check; | |
| i=cmd_out(); | |
| if (i<0) return (i); | |
| if ((infobuf[0]&0x80)!=0) | |
| { | |
| current_drive->f_multisession=1; | |
| current_drive->lba_multi=msf2blk(make32(make16(0,infobuf[1]), | |
| make16(infobuf[2],infobuf[3]))); | |
| } | |
| } | |
| else if (famLV_drive) | |
| { | |
| drvcmd[0]=CMDL_MULTISESS; | |
| drvcmd[1]=3; | |
| drvcmd[2]=1; | |
| response_count=8; | |
| flags_cmd_out=f_putcmd; | |
| i=cmd_out(); | |
| if (i<0) return (i); | |
| current_drive->lba_multi=msf2blk(make32(make16(0,infobuf[5]), | |
| make16(infobuf[6],infobuf[7]))); | |
| } | |
| else if (famT_drive) | |
| { | |
| response_count=12; | |
| drvcmd[0]=CMDT_DISKINFO; | |
| drvcmd[1]=0x02; | |
| drvcmd[6]=0; | |
| drvcmd[8]=response_count; | |
| drvcmd[9]=0x40; | |
| i=cmd_out(); | |
| if (i<0) return (i); | |
| if (i<response_count) return (-100-i); | |
| current_drive->first_session=infobuf[2]; | |
| current_drive->last_session=infobuf[3]; | |
| current_drive->track_of_last_session=infobuf[6]; | |
| if (current_drive->first_session!=current_drive->last_session) | |
| { | |
| current_drive->f_multisession=1; | |
| current_drive->lba_multi=msf2blk(make32(make16(0,infobuf[9]),make16(infobuf[10],infobuf[11]))); | |
| } | |
| } | |
| for (i=0;i<response_count;i++) | |
| sprintf(&msgbuf[i*3], " %02X", infobuf[i]); | |
| msgbuf[i*3]=0; | |
| msg(DBG_MUL,"MultiSession Info:%s (%d)\n", msgbuf, current_drive->lba_multi); | |
| if (current_drive->lba_multi>200) | |
| { | |
| current_drive->f_multisession=1; | |
| msg(DBG_MUL,"MultiSession base: %06X\n", current_drive->lba_multi); | |
| } | |
| return (0); | |
| } | |
| /*==========================================================================*/ | |
| #ifdef FUTURE | |
| static int cc_SubChanInfo(int frame, int count, u_char *buffer) | |
| /* "frame" is a RED BOOK (msf-bin) address */ | |
| { | |
| int i; | |
| if (fam0LV_drive) return (-ENOSYS); /* drive firmware lacks it */ | |
| if (famT_drive) | |
| { | |
| return (-1); | |
| } | |
| #if 0 | |
| if (current_drive->audio_state!=audio_playing) return (-ENODATA); | |
| #endif | |
| clr_cmdbuf(); | |
| drvcmd[0]=CMD1_SUBCHANINF; | |
| drvcmd[1]=(frame>>16)&0xFF; | |
| drvcmd[2]=(frame>>8)&0xFF; | |
| drvcmd[3]=frame&0xFF; | |
| drvcmd[5]=(count>>8)&0xFF; | |
| drvcmd[6]=count&0xFF; | |
| flags_cmd_out=f_putcmd|f_respo2|f_ResponseStatus|f_obey_p_check; | |
| cmd_type=READ_SC; | |
| current_drive->frame_size=CD_FRAMESIZE_SUB; | |
| i=cmd_out(); /* which buffer to use? */ | |
| return (i); | |
| } | |
| #endif /* FUTURE */ | |
| /*==========================================================================*/ | |
| static void __init check_datarate(void) | |
| { | |
| int i=0; | |
| msg(DBG_IOX,"check_datarate entered.\n"); | |
| datarate=0; | |
| #if TEST_STI | |
| for (i=0;i<=1000;i++) printk("."); | |
| #endif | |
| /* set a timer to make (timed_out_delay!=0) after 1.1 seconds */ | |
| #if 1 | |
| del_timer(&delay_timer); | |
| #endif | |
| delay_timer.expires=jiffies+11*HZ/10; | |
| timed_out_delay=0; | |
| add_timer(&delay_timer); | |
| #if 0 | |
| msg(DBG_TIM,"delay timer started (11*HZ/10).\n"); | |
| #endif | |
| do | |
| { | |
| i=inb(CDi_status); | |
| datarate++; | |
| #if 1 | |
| if (datarate>0x6FFFFFFF) break; | |
| #endif | |
| } | |
| while (!timed_out_delay); | |
| del_timer(&delay_timer); | |
| #if 0 | |
| msg(DBG_TIM,"datarate: %04X\n", datarate); | |
| #endif | |
| if (datarate<65536) datarate=65536; | |
| maxtim16=datarate*16; | |
| maxtim04=datarate*4; | |
| maxtim02=datarate*2; | |
| maxtim_8=datarate/32; | |
| #if LONG_TIMING | |
| maxtim_data=datarate/100; | |
| #else | |
| maxtim_data=datarate/300; | |
| #endif /* LONG_TIMING */ | |
| #if 0 | |
| msg(DBG_TIM,"maxtim_8 %d, maxtim_data %d.\n", maxtim_8, maxtim_data); | |
| #endif | |
| } | |
| /*==========================================================================*/ | |
| #if 0 | |
| static int c2_ReadError(int fam) | |
| { | |
| int i; | |
| clr_cmdbuf(); | |
| response_count=9; | |
| clr_respo_buf(9); | |
| if (fam==1) | |
| { | |
| drvcmd[0]=CMD0_READ_ERR; /* same as CMD1_ and CMDL_ */ | |
| i=do_cmd(f_putcmd|f_lopsta|f_getsta|f_ResponseStatus); | |
| } | |
| else if (fam==2) | |
| { | |
| drvcmd[0]=CMD2_READ_ERR; | |
| i=do_cmd(f_putcmd); | |
| } | |
| else return (-1); | |
| return (i); | |
| } | |
| #endif | |
| /*==========================================================================*/ | |
| static void __init ask_mail(void) | |
| { | |
| int i; | |
| msg(DBG_INF, "please mail the following lines to emoenke@gwdg.de\n"); | |
| msg(DBG_INF, "(don't mail if you are not using the actual kernel):\n"); | |
| msg(DBG_INF, "%s\n", VERSION); | |
| msg(DBG_INF, "address %03X, type %s, drive %s (ID %d)\n", | |
| CDo_command, type, current_drive->drive_model, current_drive->drv_id); | |
| for (i=0;i<12;i++) | |
| sprintf(&msgbuf[i*3], " %02X", infobuf[i]); | |
| msgbuf[i*3]=0; | |
| msg(DBG_INF,"infobuf =%s\n", msgbuf); | |
| for (i=0;i<12;i++) | |
| sprintf(&msgbuf[i*3], " %c ", infobuf[i]); | |
| msgbuf[i*3]=0; | |
| msg(DBG_INF,"infobuf =%s\n", msgbuf); | |
| } | |
| /*==========================================================================*/ | |
| static int __init check_version(void) | |
| { | |
| int i, j, l; | |
| int teac_possible=0; | |
| msg(DBG_INI,"check_version: id=%d, d=%d.\n", current_drive->drv_id, current_drive - D_S); | |
| current_drive->drv_type=0; | |
| /* check for CR-52x, CR-56x, LCS-7260 and ECS-AT */ | |
| /* clear any pending error state */ | |
| clr_cmdbuf(); | |
| drvcmd[0]=CMD0_READ_ERR; /* same as CMD1_ and CMDL_ */ | |
| response_count=9; | |
| flags_cmd_out=f_putcmd; | |
| i=cmd_out(); | |
| if (i<0) msg(DBG_INI,"CMD0_READ_ERR returns %d (ok anyway).\n",i); | |
| /* read drive version */ | |
| clr_cmdbuf(); | |
| for (i=0;i<12;i++) infobuf[i]=0; | |
| drvcmd[0]=CMD0_READ_VER; /* same as CMD1_ and CMDL_ */ | |
| response_count=12; /* fam1: only 11 */ | |
| flags_cmd_out=f_putcmd; | |
| i=cmd_out(); | |
| if (i<-1) msg(DBG_INI,"CMD0_READ_VER returns %d\n",i); | |
| if (i==-11) teac_possible++; | |
| j=0; | |
| for (i=0;i<12;i++) j+=infobuf[i]; | |
| if (j) | |
| { | |
| for (i=0;i<12;i++) | |
| sprintf(&msgbuf[i*3], " %02X", infobuf[i]); | |
| msgbuf[i*3]=0; | |
| msg(DBG_ECS,"infobuf =%s\n", msgbuf); | |
| for (i=0;i<12;i++) | |
| sprintf(&msgbuf[i*3], " %c ", infobuf[i]); | |
| msgbuf[i*3]=0; | |
| msg(DBG_ECS,"infobuf =%s\n", msgbuf); | |
| } | |
| for (i=0;i<4;i++) if (infobuf[i]!=family1[i]) break; | |
| if (i==4) | |
| { | |
| current_drive->drive_model[0]='C'; | |
| current_drive->drive_model[1]='R'; | |
| current_drive->drive_model[2]='-'; | |
| current_drive->drive_model[3]='5'; | |
| current_drive->drive_model[4]=infobuf[i++]; | |
| current_drive->drive_model[5]=infobuf[i++]; | |
| current_drive->drive_model[6]=0; | |
| current_drive->drv_type=drv_fam1; | |
| } | |
| if (!current_drive->drv_type) | |
| { | |
| for (i=0;i<8;i++) if (infobuf[i]!=family0[i]) break; | |
| if (i==8) | |
| { | |
| current_drive->drive_model[0]='C'; | |
| current_drive->drive_model[1]='R'; | |
| current_drive->drive_model[2]='-'; | |
| current_drive->drive_model[3]='5'; | |
| current_drive->drive_model[4]='2'; | |
| current_drive->drive_model[5]='x'; | |
| current_drive->drive_model[6]=0; | |
| current_drive->drv_type=drv_fam0; | |
| } | |
| } | |
| if (!current_drive->drv_type) | |
| { | |
| for (i=0;i<8;i++) if (infobuf[i]!=familyL[i]) break; | |
| if (i==8) | |
| { | |
| for (j=0;j<8;j++) | |
| current_drive->drive_model[j]=infobuf[j]; | |
| current_drive->drive_model[8]=0; | |
| current_drive->drv_type=drv_famL; | |
| } | |
| } | |
| if (!current_drive->drv_type) | |
| { | |
| for (i=0;i<6;i++) if (infobuf[i]!=familyV[i]) break; | |
| if (i==6) | |
| { | |
| for (j=0;j<6;j++) | |
| current_drive->drive_model[j]=infobuf[j]; | |
| current_drive->drive_model[6]=0; | |
| current_drive->drv_type=drv_famV; | |
| i+=2; /* 2 blanks before version */ | |
| } | |
| } | |
| if (!current_drive->drv_type) | |
| { | |
| /* check for CD200 */ | |
| clr_cmdbuf(); | |
| drvcmd[0]=CMD2_READ_ERR; | |
| response_count=9; | |
| flags_cmd_out=f_putcmd; | |
| i=cmd_out(); | |
| if (i<0) msg(DBG_INI,"CMD2_READERR returns %d (ok anyway).\n",i); | |
| if (i<0) msg(DBG_000,"CMD2_READERR returns %d (ok anyway).\n",i); | |
| /* read drive version */ | |
| clr_cmdbuf(); | |
| for (i=0;i<12;i++) infobuf[i]=0; | |
| if (sbpro_type==1) OUT(CDo_sel_i_d,0); | |
| #if 0 | |
| OUT(CDo_reset,0); | |
| sbp_sleep(6*HZ); | |
| OUT(CDo_enable,current_drive->drv_sel); | |
| #endif | |
| drvcmd[0]=CMD2_READ_VER; | |
| response_count=12; | |
| flags_cmd_out=f_putcmd; | |
| i=cmd_out(); | |
| if (i<0) msg(DBG_INI,"CMD2_READ_VER returns %d\n",i); | |
| if (i==-7) teac_possible++; | |
| j=0; | |
| for (i=0;i<12;i++) j+=infobuf[i]; | |
| if (j) | |
| { | |
| for (i=0;i<12;i++) | |
| sprintf(&msgbuf[i*3], " %02X", infobuf[i]); | |
| msgbuf[i*3]=0; | |
| msg(DBG_IDX,"infobuf =%s\n", msgbuf); | |
| for (i=0;i<12;i++) | |
| sprintf(&msgbuf[i*3], " %c ", infobuf[i]); | |
| msgbuf[i*3]=0; | |
| msg(DBG_IDX,"infobuf =%s\n", msgbuf); | |
| } | |
| if (i>=0) | |
| { | |
| for (i=0;i<5;i++) if (infobuf[i]!=family2[i]) break; | |
| if (i==5) | |
| { | |
| current_drive->drive_model[0]='C'; | |
| current_drive->drive_model[1]='D'; | |
| current_drive->drive_model[2]='2'; | |
| current_drive->drive_model[3]='0'; | |
| current_drive->drive_model[4]='0'; | |
| current_drive->drive_model[5]=infobuf[i++]; | |
| current_drive->drive_model[6]=infobuf[i++]; | |
| current_drive->drive_model[7]=0; | |
| current_drive->drv_type=drv_fam2; | |
| } | |
| } | |
| } | |
| if (!current_drive->drv_type) | |
| { | |
| /* check for TEAC CD-55A */ | |
| msg(DBG_TEA,"teac_possible: %d\n",teac_possible); | |
| for (j=1;j<=((current_drive->drv_id==0)?3:1);j++) | |
| { | |
| for (l=1;l<=((current_drive->drv_id==0)?10:1);l++) | |
| { | |
| msg(DBG_TEA,"TEAC reset #%d-%d.\n", j, l); | |
| if (sbpro_type==1) OUT(CDo_reset,0); | |
| else | |
| { | |
| OUT(CDo_enable,current_drive->drv_sel); | |
| OUT(CDo_sel_i_d,0); | |
| OUT(CDo_command,CMDT_RESET); | |
| for (i=0;i<9;i++) OUT(CDo_command,0); | |
| } | |
| sbp_sleep(5*HZ/10); | |
| OUT(CDo_enable,current_drive->drv_sel); | |
| OUT(CDo_sel_i_d,0); | |
| i=inb(CDi_status); | |
| msg(DBG_TEA,"TEAC CDi_status: %02X.\n",i); | |
| #if 0 | |
| if (i&s_not_result_ready) continue; /* drive not present or ready */ | |
| #endif | |
| i=inb(CDi_info); | |
| msg(DBG_TEA,"TEAC CDi_info: %02X.\n",i); | |
| if (i==0x55) break; /* drive found */ | |
| } | |
| if (i==0x55) break; /* drive found */ | |
| } | |
| if (i==0x55) /* drive found */ | |
| { | |
| msg(DBG_TEA,"TEAC drive found.\n"); | |
| clr_cmdbuf(); | |
| flags_cmd_out=f_putcmd; | |
| response_count=12; | |
| drvcmd[0]=CMDT_READ_VER; | |
| drvcmd[4]=response_count; | |
| for (i=0;i<12;i++) infobuf[i]=0; | |
| i=cmd_out_T(); | |
| if (i!=0) msg(DBG_TEA,"cmd_out_T(CMDT_READ_VER) returns %d.\n",i); | |
| for (i=1;i<6;i++) if (infobuf[i]!=familyT[i-1]) break; | |
| if (i==6) | |
| { | |
| current_drive->drive_model[0]='C'; | |
| current_drive->drive_model[1]='D'; | |
| current_drive->drive_model[2]='-'; | |
| current_drive->drive_model[3]='5'; | |
| current_drive->drive_model[4]='5'; | |
| current_drive->drive_model[5]=0; | |
| current_drive->drv_type=drv_famT; | |
| } | |
| } | |
| } | |
| if (!current_drive->drv_type) | |
| { | |
| msg(DBG_TEA,"no drive found at address %03X under ID %d.\n",CDo_command,current_drive->drv_id); | |
| return (-522); | |
| } | |
| for (j=0;j<4;j++) current_drive->firmware_version[j]=infobuf[i+j]; | |
| if (famL_drive) | |
| { | |
| u_char lcs_firm_e1[]="A E1"; | |
| u_char lcs_firm_f4[]="A4F4"; | |
| for (j=0;j<4;j++) | |
| if (current_drive->firmware_version[j]!=lcs_firm_e1[j]) break; | |
| if (j==4) current_drive->drv_type=drv_e1; | |
| for (j=0;j<4;j++) | |
| if (current_drive->firmware_version[j]!=lcs_firm_f4[j]) break; | |
| if (j==4) current_drive->drv_type=drv_f4; | |
| if (current_drive->drv_type==drv_famL) ask_mail(); | |
| } | |
| else if (famT_drive) | |
| { | |
| j=infobuf[4]; /* one-byte version??? - here: 0x15 */ | |
| if (j=='5') | |
| { | |
| current_drive->firmware_version[0]=infobuf[7]; | |
| current_drive->firmware_version[1]=infobuf[8]; | |
| current_drive->firmware_version[2]=infobuf[10]; | |
| current_drive->firmware_version[3]=infobuf[11]; | |
| } | |
| else | |
| { | |
| if (j!=0x15) ask_mail(); | |
| current_drive->firmware_version[0]='0'; | |
| current_drive->firmware_version[1]='.'; | |
| current_drive->firmware_version[2]='0'+(j>>4); | |
| current_drive->firmware_version[3]='0'+(j&0x0f); | |
| } | |
| } | |
| else /* CR-52x, CR-56x, CD200, ECS-AT */ | |
| { | |
| j = (current_drive->firmware_version[0] & 0x0F) * 100 + | |
| (current_drive->firmware_version[2] & 0x0F) *10 + | |
| (current_drive->firmware_version[3] & 0x0F); | |
| if (fam0_drive) | |
| { | |
| if (j<200) current_drive->drv_type=drv_199; | |
| else if (j<201) current_drive->drv_type=drv_200; | |
| else if (j<210) current_drive->drv_type=drv_201; | |
| else if (j<211) current_drive->drv_type=drv_210; | |
| else if (j<300) current_drive->drv_type=drv_211; | |
| else if (j>=300) current_drive->drv_type=drv_300; | |
| } | |
| else if (fam1_drive) | |
| { | |
| if (j<100) current_drive->drv_type=drv_099; | |
| else | |
| { | |
| current_drive->drv_type=drv_100; | |
| if ((j!=500)&&(j!=102)) ask_mail(); | |
| } | |
| } | |
| else if (fam2_drive) | |
| { | |
| if (current_drive->drive_model[5]=='F') | |
| { | |
| if ((j!=1)&&(j!=35)&&(j!=200)&&(j!=210)) | |
| ask_mail(); /* unknown version at time */ | |
| } | |
| else | |
| { | |
| msg(DBG_INF,"this CD200 drive is not fully supported yet - only audio will work.\n"); | |
| if ((j!=101)&&(j!=35)) | |
| ask_mail(); /* unknown version at time */ | |
| } | |
| } | |
| else if (famV_drive) | |
| { | |
| if ((j==100)||(j==150)) current_drive->drv_type=drv_at; | |
| ask_mail(); /* hopefully we get some feedback by this */ | |
| } | |
| } | |
| msg(DBG_LCS,"drive type %02X\n",current_drive->drv_type); | |
| msg(DBG_INI,"check_version done.\n"); | |
| return (0); | |
| } | |
| /*==========================================================================*/ | |
| static void switch_drive(struct sbpcd_drive *p) | |
| { | |
| current_drive = p; | |
| OUT(CDo_enable,current_drive->drv_sel); | |
| msg(DBG_DID,"drive %d (ID=%d) activated.\n", | |
| current_drive - D_S, current_drive->drv_id); | |
| return; | |
| } | |
| /*==========================================================================*/ | |
| #ifdef PATH_CHECK | |
| /* | |
| * probe for the presence of an interface card | |
| */ | |
| static int __init check_card(int port) | |
| { | |
| #undef N_RESPO | |
| #define N_RESPO 20 | |
| int i, j, k; | |
| u_char response[N_RESPO]; | |
| u_char save_port0; | |
| u_char save_port3; | |
| msg(DBG_INI,"check_card entered.\n"); | |
| save_port0=inb(port+0); | |
| save_port3=inb(port+3); | |
| for (j=0;j<NR_SBPCD;j++) | |
| { | |
| OUT(port+3,j) ; /* enable drive #j */ | |
| OUT(port+0,CMD0_PATH_CHECK); | |
| for (i=10;i>0;i--) OUT(port+0,0); | |
| for (k=0;k<N_RESPO;k++) response[k]=0; | |
| for (k=0;k<N_RESPO;k++) | |
| { | |
| for (i=10000;i>0;i--) | |
| { | |
| if (inb(port+1)&s_not_result_ready) continue; | |
| response[k]=inb(port+0); | |
| break; | |
| } | |
| } | |
| for (i=0;i<N_RESPO;i++) | |
| sprintf(&msgbuf[i*3], " %02X", response[i]); | |
| msgbuf[i*3]=0; | |
| msg(DBG_TEA,"path check 00 (%d): %s\n", j, msgbuf); | |
| OUT(port+0,CMD0_PATH_CHECK); | |
| for (i=10;i>0;i--) OUT(port+0,0); | |
| for (k=0;k<N_RESPO;k++) response[k]=0xFF; | |
| for (k=0;k<N_RESPO;k++) | |
| { | |
| for (i=10000;i>0;i--) | |
| { | |
| if (inb(port+1)&s_not_result_ready) continue; | |
| response[k]=inb(port+0); | |
| break; | |
| } | |
| } | |
| for (i=0;i<N_RESPO;i++) | |
| sprintf(&msgbuf[i*3], " %02X", response[i]); | |
| msgbuf[i*3]=0; | |
| msg(DBG_TEA,"path check 00 (%d): %s\n", j, msgbuf); | |
| if (response[0]==0xAA) | |
| if (response[1]==0x55) | |
| return (0); | |
| } | |
| for (j=0;j<NR_SBPCD;j++) | |
| { | |
| OUT(port+3,j) ; /* enable drive #j */ | |
| OUT(port+0,CMD2_READ_VER); | |
| for (i=10;i>0;i--) OUT(port+0,0); | |
| for (k=0;k<N_RESPO;k++) response[k]=0; | |
| for (k=0;k<N_RESPO;k++) | |
| { | |
| for (i=1000000;i>0;i--) | |
| { | |
| if (inb(port+1)&s_not_result_ready) continue; | |
| response[k]=inb(port+0); | |
| break; | |
| } | |
| } | |
| for (i=0;i<N_RESPO;i++) | |
| sprintf(&msgbuf[i*3], " %02X", response[i]); | |
| msgbuf[i*3]=0; | |
| msg(DBG_TEA,"path check 12 (%d): %s\n", j, msgbuf); | |
| OUT(port+0,CMD2_READ_VER); | |
| for (i=10;i>0;i--) OUT(port+0,0); | |
| for (k=0;k<N_RESPO;k++) response[k]=0xFF; | |
| for (k=0;k<N_RESPO;k++) | |
| { | |
| for (i=1000000;i>0;i--) | |
| { | |
| if (inb(port+1)&s_not_result_ready) continue; | |
| response[k]=inb(port+0); | |
| break; | |
| } | |
| } | |
| for (i=0;i<N_RESPO;i++) | |
| sprintf(&msgbuf[i*3], " %02X", response[i]); | |
| msgbuf[i*3]=0; | |
| msg(DBG_TEA,"path check 12 (%d): %s\n", j, msgbuf); | |
| if (response[0]==0xAA) | |
| if (response[1]==0x55) | |
| return (0); | |
| } | |
| OUT(port+0,save_port0); | |
| OUT(port+3,save_port3); | |
| return (0); /* in any case - no real "function" at time */ | |
| } | |
| #endif /* PATH_CHECK */ | |
| /*==========================================================================*/ | |
| /*==========================================================================*/ | |
| /* | |
| * probe for the presence of drives on the selected controller | |
| */ | |
| static int __init check_drives(void) | |
| { | |
| int i, j; | |
| msg(DBG_INI,"check_drives entered.\n"); | |
| ndrives=0; | |
| for (j=0;j<max_drives;j++) | |
| { | |
| struct sbpcd_drive *p = D_S + ndrives; | |
| p->drv_id=j; | |
| if (sbpro_type==1) p->drv_sel=(j&0x01)<<1|(j&0x02)>>1; | |
| else p->drv_sel=j; | |
| switch_drive(p); | |
| msg(DBG_INI,"check_drives: drive %d (ID=%d) activated.\n",ndrives,j); | |
| msg(DBG_000,"check_drives: drive %d (ID=%d) activated.\n",ndrives,j); | |
| i=check_version(); | |
| if (i<0) msg(DBG_INI,"check_version returns %d.\n",i); | |
| else | |
| { | |
| current_drive->drv_options=drv_pattern[j]; | |
| if (fam0L_drive) current_drive->drv_options&=~(speed_auto|speed_300|speed_150); | |
| msg(DBG_INF, "Drive %d (ID=%d): %.9s (%.4s) at 0x%03X (type %d)\n", | |
| current_drive - D_S, | |
| current_drive->drv_id, | |
| current_drive->drive_model, | |
| current_drive->firmware_version, | |
| CDo_command, | |
| sbpro_type); | |
| ndrives++; | |
| } | |
| } | |
| for (j=ndrives;j<NR_SBPCD;j++) D_S[j].drv_id=-1; | |
| if (ndrives==0) return (-1); | |
| return (0); | |
| } | |
| /*==========================================================================*/ | |
| #ifdef FUTURE | |
| /* | |
| * obtain if requested service disturbs current audio state | |
| */ | |
| static int obey_audio_state(u_char audio_state, u_char func,u_char subfunc) | |
| { | |
| switch (audio_state) /* audio status from controller */ | |
| { | |
| case aud_11: /* "audio play in progress" */ | |
| case audx11: | |
| switch (func) /* DOS command code */ | |
| { | |
| case cmd_07: /* input flush */ | |
| case cmd_0d: /* open device */ | |
| case cmd_0e: /* close device */ | |
| case cmd_0c: /* ioctl output */ | |
| return (1); | |
| case cmd_03: /* ioctl input */ | |
| switch (subfunc) | |
| /* DOS ioctl input subfunction */ | |
| { | |
| case cxi_00: | |
| case cxi_06: | |
| case cxi_09: | |
| return (1); | |
| default: | |
| return (ERROR15); | |
| } | |
| return (1); | |
| default: | |
| return (ERROR15); | |
| } | |
| return (1); | |
| case aud_12: /* "audio play paused" */ | |
| case audx12: | |
| return (1); | |
| default: | |
| return (2); | |
| } | |
| } | |
| /*==========================================================================*/ | |
| /* allowed is only | |
| * ioctl_o, flush_input, open_device, close_device, | |
| * tell_address, tell_volume, tell_capabiliti, | |
| * tell_framesize, tell_CD_changed, tell_audio_posi | |
| */ | |
| static int check_allowed1(u_char func1, u_char func2) | |
| { | |
| #if 000 | |
| if (func1==ioctl_o) return (0); | |
| if (func1==read_long) return (-1); | |
| if (func1==read_long_prefetch) return (-1); | |
| if (func1==seek) return (-1); | |
| if (func1==audio_play) return (-1); | |
| if (func1==audio_pause) return (-1); | |
| if (func1==audio_resume) return (-1); | |
| if (func1!=ioctl_i) return (0); | |
| if (func2==tell_SubQ_run_tot) return (-1); | |
| if (func2==tell_cdsize) return (-1); | |
| if (func2==tell_TocDescrip) return (-1); | |
| if (func2==tell_TocEntry) return (-1); | |
| if (func2==tell_subQ_info) return (-1); | |
| if (fam1_drive) if (func2==tell_SubChanInfo) return (-1); | |
| if (func2==tell_UPC) return (-1); | |
| #else | |
| return (0); | |
| #endif | |
| } | |
| /*==========================================================================*/ | |
| static int check_allowed2(u_char func1, u_char func2) | |
| { | |
| #if 000 | |
| if (func1==read_long) return (-1); | |
| if (func1==read_long_prefetch) return (-1); | |
| if (func1==seek) return (-1); | |
| if (func1==audio_play) return (-1); | |
| if (func1!=ioctl_o) return (0); | |
| if (fam1_drive) | |
| { | |
| if (func2==EjectDisk) return (-1); | |
| if (func2==CloseTray) return (-1); | |
| } | |
| #else | |
| return (0); | |
| #endif | |
| } | |
| /*==========================================================================*/ | |
| static int check_allowed3(u_char func1, u_char func2) | |
| { | |
| #if 000 | |
| if (func1==ioctl_i) | |
| { | |
| if (func2==tell_address) return (0); | |
| if (func2==tell_capabiliti) return (0); | |
| if (func2==tell_CD_changed) return (0); | |
| if (fam0L_drive) if (func2==tell_SubChanInfo) return (0); | |
| return (-1); | |
| } | |
| if (func1==ioctl_o) | |
| { | |
| if (func2==DriveReset) return (0); | |
| if (fam0L_drive) | |
| { | |
| if (func2==EjectDisk) return (0); | |
| if (func2==LockDoor) return (0); | |
| if (func2==CloseTray) return (0); | |
| } | |
| return (-1); | |
| } | |
| if (func1==flush_input) return (-1); | |
| if (func1==read_long) return (-1); | |
| if (func1==read_long_prefetch) return (-1); | |
| if (func1==seek) return (-1); | |
| if (func1==audio_play) return (-1); | |
| if (func1==audio_pause) return (-1); | |
| if (func1==audio_resume) return (-1); | |
| #else | |
| return (0); | |
| #endif | |
| } | |
| /*==========================================================================*/ | |
| static int seek_pos_audio_end(void) | |
| { | |
| int i; | |
| i=msf2blk(current_drive->pos_audio_end)-1; | |
| if (i<0) return (-1); | |
| i=cc_Seek(i,0); | |
| return (i); | |
| } | |
| #endif /* FUTURE */ | |
| /*==========================================================================*/ | |
| static int ReadToC(void) | |
| { | |
| int i, j; | |
| current_drive->diskstate_flags &= ~toc_bit; | |
| current_drive->ored_ctl_adr=0; | |
| /* special handling of CD-I HE */ | |
| if ((current_drive->n_first_track == 2 && current_drive->n_last_track == 2) || | |
| current_drive->xa_byte == 0x10) | |
| { | |
| current_drive->TocBuffer[1].nixbyte=0; | |
| current_drive->TocBuffer[1].ctl_adr=0x40; | |
| current_drive->TocBuffer[1].number=1; | |
| current_drive->TocBuffer[1].format=0; | |
| current_drive->TocBuffer[1].address=blk2msf(0); | |
| current_drive->ored_ctl_adr |= 0x40; | |
| current_drive->n_first_track = 1; | |
| current_drive->n_last_track = 1; | |
| current_drive->xa_byte = 0x10; | |
| j = 2; | |
| } else | |
| for (j=current_drive->n_first_track;j<=current_drive->n_last_track;j++) | |
| { | |
| i=cc_ReadTocEntry(j); | |
| if (i<0) | |
| { | |
| msg(DBG_INF,"cc_ReadTocEntry(%d) returns %d.\n",j,i); | |
| return (i); | |
| } | |
| current_drive->TocBuffer[j].nixbyte=current_drive->TocEnt_nixbyte; | |
| current_drive->TocBuffer[j].ctl_adr=current_drive->TocEnt_ctl_adr; | |
| current_drive->TocBuffer[j].number=current_drive->TocEnt_number; | |
| current_drive->TocBuffer[j].format=current_drive->TocEnt_format; | |
| current_drive->TocBuffer[j].address=current_drive->TocEnt_address; | |
| current_drive->ored_ctl_adr |= current_drive->TocEnt_ctl_adr; | |
| } | |
| /* fake entry for LeadOut Track */ | |
| current_drive->TocBuffer[j].nixbyte=0; | |
| current_drive->TocBuffer[j].ctl_adr=0; | |
| current_drive->TocBuffer[j].number=CDROM_LEADOUT; | |
| current_drive->TocBuffer[j].format=0; | |
| current_drive->TocBuffer[j].address=current_drive->size_msf; | |
| current_drive->diskstate_flags |= toc_bit; | |
| return (0); | |
| } | |
| /*==========================================================================*/ | |
| static int DiskInfo(void) | |
| { | |
| int i, j; | |
| current_drive->mode=READ_M1; | |
| #undef LOOP_COUNT | |
| #define LOOP_COUNT 10 /* needed for some "old" drives */ | |
| msg(DBG_000,"DiskInfo entered.\n"); | |
| for (j=1;j<LOOP_COUNT;j++) | |
| { | |
| #if 0 | |
| i=SetSpeed(); | |
| if (i<0) | |
| { | |
| msg(DBG_INF,"DiskInfo: SetSpeed returns %d\n", i); | |
| continue; | |
| } | |
| i=cc_ModeSense(); | |
| if (i<0) | |
| { | |
| msg(DBG_INF,"DiskInfo: cc_ModeSense returns %d\n", i); | |
| continue; | |
| } | |
| #endif | |
| i=cc_ReadCapacity(); | |
| if (i>=0) break; | |
| msg(DBG_INF,"DiskInfo: ReadCapacity #%d returns %d\n", j, i); | |
| #if 0 | |
| i=cc_DriveReset(); | |
| #endif | |
| if (!fam0_drive && j == 2) break; | |
| } | |
| if (j==LOOP_COUNT) return (-33); /* give up */ | |
| i=cc_ReadTocDescr(); | |
| if (i<0) | |
| { | |
| msg(DBG_INF,"DiskInfo: ReadTocDescr returns %d\n", i); | |
| return (i); | |
| } | |
| i=ReadToC(); | |
| if (i<0) | |
| { | |
| msg(DBG_INF,"DiskInfo: ReadToC returns %d\n", i); | |
| return (i); | |
| } | |
| i=cc_CheckMultiSession(); | |
| if (i<0) | |
| { | |
| msg(DBG_INF,"DiskInfo: cc_CheckMultiSession returns %d\n", i); | |
| return (i); | |
| } | |
| if (current_drive->f_multisession) current_drive->sbp_bufsiz=1; /* possibly a weird PhotoCD */ | |
| else current_drive->sbp_bufsiz=buffers; | |
| i=cc_ReadTocEntry(current_drive->n_first_track); | |
| if (i<0) | |
| { | |
| msg(DBG_INF,"DiskInfo: cc_ReadTocEntry(1) returns %d\n", i); | |
| return (i); | |
| } | |
| i=cc_ReadUPC(); | |
| if (i<0) msg(DBG_INF,"DiskInfo: cc_ReadUPC returns %d\n", i); | |
| if ((fam0L_drive) && (current_drive->xa_byte==0x20 || current_drive->xa_byte == 0x10)) | |
| { | |
| /* XA disk with old drive */ | |
| cc_ModeSelect(CD_FRAMESIZE_RAW1); | |
| cc_ModeSense(); | |
| } | |
| if (famT_drive) cc_prep_mode_T(); | |
| msg(DBG_000,"DiskInfo done.\n"); | |
| return (0); | |
| } | |
| static int sbpcd_drive_status(struct cdrom_device_info *cdi, int slot_nr) | |
| { | |
| struct sbpcd_drive *p = cdi->handle; | |
| int st; | |
| if (CDSL_CURRENT != slot_nr) { | |
| /* we have no changer support */ | |
| return -EINVAL; | |
| } | |
| cc_ReadStatus(); | |
| st=ResponseStatus(); | |
| if (st<0) | |
| { | |
| msg(DBG_INF,"sbpcd_drive_status: timeout.\n"); | |
| return (0); | |
| } | |
| msg(DBG_000,"Drive Status: door_locked =%d.\n", st_door_locked); | |
| msg(DBG_000,"Drive Status: door_closed =%d.\n", st_door_closed); | |
| msg(DBG_000,"Drive Status: caddy_in =%d.\n", st_caddy_in); | |
| msg(DBG_000,"Drive Status: disk_ok =%d.\n", st_diskok); | |
| msg(DBG_000,"Drive Status: spinning =%d.\n", st_spinning); | |
| msg(DBG_000,"Drive Status: busy =%d.\n", st_busy); | |
| #if 0 | |
| if (!(p->status_bits & p_door_closed)) return CDS_TRAY_OPEN; | |
| if (p->status_bits & p_disk_ok) return CDS_DISC_OK; | |
| if (p->status_bits & p_disk_in) return CDS_DRIVE_NOT_READY; | |
| return CDS_NO_DISC; | |
| #else | |
| if (p->status_bits & p_spinning) return CDS_DISC_OK; | |
| /* return CDS_TRAY_OPEN; */ | |
| return CDS_NO_DISC; | |
| #endif | |
| } | |
| /*==========================================================================*/ | |
| #ifdef FUTURE | |
| /* | |
| * called always if driver gets entered | |
| * returns 0 or ERROR2 or ERROR15 | |
| */ | |
| static int prepare(u_char func, u_char subfunc) | |
| { | |
| int i; | |
| if (fam0L_drive) | |
| { | |
| i=inb(CDi_status); | |
| if (i&s_attention) GetStatus(); | |
| } | |
| else if (fam1_drive) GetStatus(); | |
| else if (fam2_drive) GetStatus(); | |
| else if (famT_drive) GetStatus(); | |
| if (current_drive->CD_changed==0xFF) | |
| { | |
| current_drive->diskstate_flags=0; | |
| current_drive->audio_state=0; | |
| if (!st_diskok) | |
| { | |
| i=check_allowed1(func,subfunc); | |
| if (i<0) return (-2); | |
| } | |
| else | |
| { | |
| i=check_allowed3(func,subfunc); | |
| if (i<0) | |
| { | |
| current_drive->CD_changed=1; | |
| return (-15); | |
| } | |
| } | |
| } | |
| else | |
| { | |
| if (!st_diskok) | |
| { | |
| current_drive->diskstate_flags=0; | |
| current_drive->audio_state=0; | |
| i=check_allowed1(func,subfunc); | |
| if (i<0) return (-2); | |
| } | |
| else | |
| { | |
| if (st_busy) | |
| { | |
| if (current_drive->audio_state!=audio_pausing) | |
| { | |
| i=check_allowed2(func,subfunc); | |
| if (i<0) return (-2); | |
| } | |
| } | |
| else | |
| { | |
| if (current_drive->audio_state==audio_playing) seek_pos_audio_end(); | |
| current_drive->audio_state=0; | |
| } | |
| if (!frame_size_valid) | |
| { | |
| i=DiskInfo(); | |
| if (i<0) | |
| { | |
| current_drive->diskstate_flags=0; | |
| current_drive->audio_state=0; | |
| i=check_allowed1(func,subfunc); | |
| if (i<0) return (-2); | |
| } | |
| } | |
| } | |
| } | |
| return (0); | |
| } | |
| #endif /* FUTURE */ | |
| /*==========================================================================*/ | |
| /*==========================================================================*/ | |
| /* | |
| * Check the results of the "get status" command. | |
| */ | |
| static int sbp_status(void) | |
| { | |
| int st; | |
| st=ResponseStatus(); | |
| if (st<0) | |
| { | |
| msg(DBG_INF,"sbp_status: timeout.\n"); | |
| return (0); | |
| } | |
| if (!st_spinning) msg(DBG_SPI,"motor got off - ignoring.\n"); | |
| if (st_check) | |
| { | |
| msg(DBG_INF,"st_check detected - retrying.\n"); | |
| return (0); | |
| } | |
| if (!st_door_closed) | |
| { | |
| msg(DBG_INF,"door is open - retrying.\n"); | |
| return (0); | |
| } | |
| if (!st_caddy_in) | |
| { | |
| msg(DBG_INF,"disk removed - retrying.\n"); | |
| return (0); | |
| } | |
| if (!st_diskok) | |
| { | |
| msg(DBG_INF,"!st_diskok detected - retrying.\n"); | |
| return (0); | |
| } | |
| if (st_busy) | |
| { | |
| msg(DBG_INF,"st_busy detected - retrying.\n"); | |
| return (0); | |
| } | |
| return (1); | |
| } | |
| /*==========================================================================*/ | |
| static int sbpcd_get_last_session(struct cdrom_device_info *cdi, struct cdrom_multisession *ms_infp) | |
| { | |
| struct sbpcd_drive *p = cdi->handle; | |
| ms_infp->addr_format = CDROM_LBA; | |
| ms_infp->addr.lba = p->lba_multi; | |
| if (p->f_multisession) | |
| ms_infp->xa_flag=1; /* valid redirection address */ | |
| else | |
| ms_infp->xa_flag=0; /* invalid redirection address */ | |
| return 0; | |
| } | |
| static int sbpcd_audio_ioctl(struct cdrom_device_info *cdi, u_int cmd, | |
| void * arg) | |
| { | |
| struct sbpcd_drive *p = cdi->handle; | |
| int i, st, j; | |
| msg(DBG_IO2,"ioctl(%s, 0x%08lX, 0x%08p)\n", cdi->name, cmd, arg); | |
| if (p->drv_id==-1) { | |
| msg(DBG_INF, "ioctl: bad device: %s\n", cdi->name); | |
| return (-ENXIO); /* no such drive */ | |
| } | |
| down(&ioctl_read_sem); | |
| if (p != current_drive) | |
| switch_drive(p); | |
| msg(DBG_IO2,"ioctl: device %s, request %04X\n",cdi->name,cmd); | |
| switch (cmd) /* Sun-compatible */ | |
| { | |
| case CDROMPAUSE: /* Pause the drive */ | |
| msg(DBG_IOC,"ioctl: CDROMPAUSE entered.\n"); | |
| /* pause the drive unit when it is currently in PLAY mode, */ | |
| /* or reset the starting and ending locations when in PAUSED mode. */ | |
| /* If applicable, at the next stopping point it reaches */ | |
| /* the drive will discontinue playing. */ | |
| switch (current_drive->audio_state) | |
| { | |
| case audio_playing: | |
| if (famL_drive) i=cc_ReadSubQ(); | |
| else i=cc_Pause_Resume(1); | |
| if (i<0) RETURN_UP(-EIO); | |
| if (famL_drive) i=cc_Pause_Resume(1); | |
| else i=cc_ReadSubQ(); | |
| if (i<0) RETURN_UP(-EIO); | |
| current_drive->pos_audio_start=current_drive->SubQ_run_tot; | |
| current_drive->audio_state=audio_pausing; | |
| RETURN_UP(0); | |
| case audio_pausing: | |
| i=cc_Seek(current_drive->pos_audio_start,1); | |
| if (i<0) RETURN_UP(-EIO); | |
| RETURN_UP(0); | |
| default: | |
| RETURN_UP(-EINVAL); | |
| } | |
| case CDROMRESUME: /* resume paused audio play */ | |
| msg(DBG_IOC,"ioctl: CDROMRESUME entered.\n"); | |
| /* resume playing audio tracks when a previous PLAY AUDIO call has */ | |
| /* been paused with a PAUSE command. */ | |
| /* It will resume playing from the location saved in SubQ_run_tot. */ | |
| if (current_drive->audio_state!=audio_pausing) RETURN_UP(-EINVAL); | |
| if (famL_drive) | |
| i=cc_PlayAudio(current_drive->pos_audio_start, | |
| current_drive->pos_audio_end); | |
| else i=cc_Pause_Resume(3); | |
| if (i<0) RETURN_UP(-EIO); | |
| current_drive->audio_state=audio_playing; | |
| RETURN_UP(0); | |
| case CDROMPLAYMSF: | |
| msg(DBG_IOC,"ioctl: CDROMPLAYMSF entered.\n"); | |
| #ifdef SAFE_MIXED | |
| if (current_drive->has_data>1) RETURN_UP(-EBUSY); | |
| #endif /* SAFE_MIXED */ | |
| if (current_drive->audio_state==audio_playing) | |
| { | |
| i=cc_Pause_Resume(1); | |
| if (i<0) RETURN_UP(-EIO); | |
| i=cc_ReadSubQ(); | |
| if (i<0) RETURN_UP(-EIO); | |
| current_drive->pos_audio_start=current_drive->SubQ_run_tot; | |
| i=cc_Seek(current_drive->pos_audio_start,1); | |
| } | |
| memcpy(&msf, (void *) arg, sizeof(struct cdrom_msf)); | |
| /* values come as msf-bin */ | |
| current_drive->pos_audio_start = (msf.cdmsf_min0<<16) | | |
| (msf.cdmsf_sec0<<8) | | |
| msf.cdmsf_frame0; | |
| current_drive->pos_audio_end = (msf.cdmsf_min1<<16) | | |
| (msf.cdmsf_sec1<<8) | | |
| msf.cdmsf_frame1; | |
| msg(DBG_IOX,"ioctl: CDROMPLAYMSF %08X %08X\n", | |
| current_drive->pos_audio_start,current_drive->pos_audio_end); | |
| i=cc_PlayAudio(current_drive->pos_audio_start,current_drive->pos_audio_end); | |
| if (i<0) | |
| { | |
| msg(DBG_INF,"ioctl: cc_PlayAudio returns %d\n",i); | |
| DriveReset(); | |
| current_drive->audio_state=0; | |
| RETURN_UP(-EIO); | |
| } | |
| current_drive->audio_state=audio_playing; | |
| RETURN_UP(0); | |
| case CDROMPLAYTRKIND: /* Play a track. This currently ignores index. */ | |
| msg(DBG_IOC,"ioctl: CDROMPLAYTRKIND entered.\n"); | |
| #ifdef SAFE_MIXED | |
| if (current_drive->has_data>1) RETURN_UP(-EBUSY); | |
| #endif /* SAFE_MIXED */ | |
| if (current_drive->audio_state==audio_playing) | |
| { | |
| msg(DBG_IOX,"CDROMPLAYTRKIND: already audio_playing.\n"); | |
| #if 1 | |
| RETURN_UP(0); /* just let us play on */ | |
| #else | |
| RETURN_UP(-EINVAL); /* play on, but say "error" */ | |
| #endif | |
| } | |
| memcpy(&ti,(void *) arg,sizeof(struct cdrom_ti)); | |
| msg(DBG_IOX,"ioctl: trk0: %d, ind0: %d, trk1:%d, ind1:%d\n", | |
| ti.cdti_trk0,ti.cdti_ind0,ti.cdti_trk1,ti.cdti_ind1); | |
| if (ti.cdti_trk0<current_drive->n_first_track) RETURN_UP(-EINVAL); | |
| if (ti.cdti_trk0>current_drive->n_last_track) RETURN_UP(-EINVAL); | |
| if (ti.cdti_trk1<ti.cdti_trk0) ti.cdti_trk1=ti.cdti_trk0; | |
| if (ti.cdti_trk1>current_drive->n_last_track) ti.cdti_trk1=current_drive->n_last_track; | |
| current_drive->pos_audio_start=current_drive->TocBuffer[ti.cdti_trk0].address; | |
| current_drive->pos_audio_end=current_drive->TocBuffer[ti.cdti_trk1+1].address; | |
| i=cc_PlayAudio(current_drive->pos_audio_start,current_drive->pos_audio_end); | |
| if (i<0) | |
| { | |
| msg(DBG_INF,"ioctl: cc_PlayAudio returns %d\n",i); | |
| DriveReset(); | |
| current_drive->audio_state=0; | |
| RETURN_UP(-EIO); | |
| } | |
| current_drive->audio_state=audio_playing; | |
| RETURN_UP(0); | |
| case CDROMREADTOCHDR: /* Read the table of contents header */ | |
| msg(DBG_IOC,"ioctl: CDROMREADTOCHDR entered.\n"); | |
| tochdr.cdth_trk0=current_drive->n_first_track; | |
| tochdr.cdth_trk1=current_drive->n_last_track; | |
| memcpy((void *) arg, &tochdr, sizeof(struct cdrom_tochdr)); | |
| RETURN_UP(0); | |
| case CDROMREADTOCENTRY: /* Read an entry in the table of contents */ | |
| msg(DBG_IOC,"ioctl: CDROMREADTOCENTRY entered.\n"); | |
| memcpy(&tocentry, (void *) arg, sizeof(struct cdrom_tocentry)); | |
| i=tocentry.cdte_track; | |
| if (i==CDROM_LEADOUT) i=current_drive->n_last_track+1; | |
| else if (i<current_drive->n_first_track||i>current_drive->n_last_track) | |
| RETURN_UP(-EINVAL); | |
| tocentry.cdte_adr=current_drive->TocBuffer[i].ctl_adr&0x0F; | |
| tocentry.cdte_ctrl=(current_drive->TocBuffer[i].ctl_adr>>4)&0x0F; | |
| tocentry.cdte_datamode=current_drive->TocBuffer[i].format; | |
| if (tocentry.cdte_format==CDROM_MSF) /* MSF-bin required */ | |
| { | |
| tocentry.cdte_addr.msf.minute=(current_drive->TocBuffer[i].address>>16)&0x00FF; | |
| tocentry.cdte_addr.msf.second=(current_drive->TocBuffer[i].address>>8)&0x00FF; | |
| tocentry.cdte_addr.msf.frame=current_drive->TocBuffer[i].address&0x00FF; | |
| } | |
| else if (tocentry.cdte_format==CDROM_LBA) /* blk required */ | |
| tocentry.cdte_addr.lba=msf2blk(current_drive->TocBuffer[i].address); | |
| else RETURN_UP(-EINVAL); | |
| memcpy((void *) arg, &tocentry, sizeof(struct cdrom_tocentry)); | |
| RETURN_UP(0); | |
| case CDROMSTOP: /* Spin down the drive */ | |
| msg(DBG_IOC,"ioctl: CDROMSTOP entered.\n"); | |
| #ifdef SAFE_MIXED | |
| if (current_drive->has_data>1) RETURN_UP(-EBUSY); | |
| #endif /* SAFE_MIXED */ | |
| i=cc_Pause_Resume(1); | |
| current_drive->audio_state=0; | |
| #if 0 | |
| cc_DriveReset(); | |
| #endif | |
| RETURN_UP(i); | |
| case CDROMSTART: /* Spin up the drive */ | |
| msg(DBG_IOC,"ioctl: CDROMSTART entered.\n"); | |
| cc_SpinUp(); | |
| current_drive->audio_state=0; | |
| RETURN_UP(0); | |
| case CDROMVOLCTRL: /* Volume control */ | |
| msg(DBG_IOC,"ioctl: CDROMVOLCTRL entered.\n"); | |
| memcpy(&volctrl,(char *) arg,sizeof(volctrl)); | |
| current_drive->vol_chan0=0; | |
| current_drive->vol_ctrl0=volctrl.channel0; | |
| current_drive->vol_chan1=1; | |
| current_drive->vol_ctrl1=volctrl.channel1; | |
| i=cc_SetVolume(); | |
| RETURN_UP(0); | |
| case CDROMVOLREAD: /* read Volume settings from drive */ | |
| msg(DBG_IOC,"ioctl: CDROMVOLREAD entered.\n"); | |
| st=cc_GetVolume(); | |
| if (st<0) RETURN_UP(st); | |
| volctrl.channel0=current_drive->vol_ctrl0; | |
| volctrl.channel1=current_drive->vol_ctrl1; | |
| volctrl.channel2=0; | |
| volctrl.channel2=0; | |
| memcpy((void *)arg,&volctrl,sizeof(volctrl)); | |
| RETURN_UP(0); | |
| case CDROMSUBCHNL: /* Get subchannel info */ | |
| msg(DBG_IOS,"ioctl: CDROMSUBCHNL entered.\n"); | |
| /* Bogus, I can do better than this! --AJK | |
| if ((st_spinning)||(!subq_valid)) { | |
| i=cc_ReadSubQ(); | |
| if (i<0) RETURN_UP(-EIO); | |
| } | |
| */ | |
| i=cc_ReadSubQ(); | |
| if (i<0) { | |
| j=cc_ReadError(); /* clear out error status from drive */ | |
| current_drive->audio_state=CDROM_AUDIO_NO_STATUS; | |
| /* get and set the disk state here, | |
| probably not the right place, but who cares! | |
| It makes it work properly! --AJK */ | |
| if (current_drive->CD_changed==0xFF) { | |
| msg(DBG_000,"Disk changed detect\n"); | |
| current_drive->diskstate_flags &= ~cd_size_bit; | |
| } | |
| RETURN_UP(-EIO); | |
| } | |
| if (current_drive->CD_changed==0xFF) { | |
| /* reread the TOC because the disk has changed! --AJK */ | |
| msg(DBG_000,"Disk changed STILL detected, rereading TOC!\n"); | |
| i=DiskInfo(); | |
| if(i==0) { | |
| current_drive->CD_changed=0x00; /* cd has changed, procede, */ | |
| RETURN_UP(-EIO); /* and get TOC, etc on next try! --AJK */ | |
| } else { | |
| RETURN_UP(-EIO); /* we weren't ready yet! --AJK */ | |
| } | |
| } | |
| memcpy(&SC, (void *) arg, sizeof(struct cdrom_subchnl)); | |
| /* | |
| This virtual crap is very bogus! | |
| It doesn't detect when the cd is done playing audio! | |
| Lets do this right with proper hardware register reading! | |
| */ | |
| cc_ReadStatus(); | |
| i=ResponseStatus(); | |
| msg(DBG_000,"Drive Status: door_locked =%d.\n", st_door_locked); | |
| msg(DBG_000,"Drive Status: door_closed =%d.\n", st_door_closed); | |
| msg(DBG_000,"Drive Status: caddy_in =%d.\n", st_caddy_in); | |
| msg(DBG_000,"Drive Status: disk_ok =%d.\n", st_diskok); | |
| msg(DBG_000,"Drive Status: spinning =%d.\n", st_spinning); | |
| msg(DBG_000,"Drive Status: busy =%d.\n", st_busy); | |
| /* st_busy indicates if it's _ACTUALLY_ playing audio */ | |
| switch (current_drive->audio_state) | |
| { | |
| case audio_playing: | |
| if(st_busy==0) { | |
| /* CD has stopped playing audio --AJK */ | |
| current_drive->audio_state=audio_completed; | |
| SC.cdsc_audiostatus=CDROM_AUDIO_COMPLETED; | |
| } else { | |
| SC.cdsc_audiostatus=CDROM_AUDIO_PLAY; | |
| } | |
| break; | |
| case audio_pausing: | |
| SC.cdsc_audiostatus=CDROM_AUDIO_PAUSED; | |
| break; | |
| case audio_completed: | |
| SC.cdsc_audiostatus=CDROM_AUDIO_COMPLETED; | |
| break; | |
| default: | |
| SC.cdsc_audiostatus=CDROM_AUDIO_NO_STATUS; | |
| break; | |
| } | |
| SC.cdsc_adr=current_drive->SubQ_ctl_adr; | |
| SC.cdsc_ctrl=current_drive->SubQ_ctl_adr>>4; | |
| SC.cdsc_trk=bcd2bin(current_drive->SubQ_trk); | |
| SC.cdsc_ind=bcd2bin(current_drive->SubQ_pnt_idx); | |
| if (SC.cdsc_format==CDROM_LBA) | |
| { | |
| SC.cdsc_absaddr.lba=msf2blk(current_drive->SubQ_run_tot); | |
| SC.cdsc_reladdr.lba=msf2blk(current_drive->SubQ_run_trk); | |
| } | |
| else /* not only if (SC.cdsc_format==CDROM_MSF) */ | |
| { | |
| SC.cdsc_absaddr.msf.minute=(current_drive->SubQ_run_tot>>16)&0x00FF; | |
| SC.cdsc_absaddr.msf.second=(current_drive->SubQ_run_tot>>8)&0x00FF; | |
| SC.cdsc_absaddr.msf.frame=current_drive->SubQ_run_tot&0x00FF; | |
| SC.cdsc_reladdr.msf.minute=(current_drive->SubQ_run_trk>>16)&0x00FF; | |
| SC.cdsc_reladdr.msf.second=(current_drive->SubQ_run_trk>>8)&0x00FF; | |
| SC.cdsc_reladdr.msf.frame=current_drive->SubQ_run_trk&0x00FF; | |
| } | |
| memcpy((void *) arg, &SC, sizeof(struct cdrom_subchnl)); | |
| msg(DBG_IOS,"CDROMSUBCHNL: %1X %02X %08X %08X %02X %02X %06X %06X\n", | |
| SC.cdsc_format,SC.cdsc_audiostatus, | |
| SC.cdsc_adr,SC.cdsc_ctrl, | |
| SC.cdsc_trk,SC.cdsc_ind, | |
| SC.cdsc_absaddr,SC.cdsc_reladdr); | |
| RETURN_UP(0); | |
| default: | |
| msg(DBG_IOC,"ioctl: unknown function request %04X\n", cmd); | |
| RETURN_UP(-EINVAL); | |
| } /* end switch(cmd) */ | |
| } | |
| /*==========================================================================*/ | |
| /* | |
| * Take care of the different block sizes between cdrom and Linux. | |
| */ | |
| static void sbp_transfer(struct request *req) | |
| { | |
| long offs; | |
| while ( (req->nr_sectors > 0) && | |
| (req->sector/4 >= current_drive->sbp_first_frame) && | |
| (req->sector/4 <= current_drive->sbp_last_frame) ) | |
| { | |
| offs = (req->sector - current_drive->sbp_first_frame * 4) * 512; | |
| memcpy(req->buffer, current_drive->sbp_buf + offs, 512); | |
| req->nr_sectors--; | |
| req->sector++; | |
| req->buffer += 512; | |
| } | |
| } | |
| /*==========================================================================*/ | |
| /* | |
| * special end_request for sbpcd to solve CURRENT==NULL bug. (GTL) | |
| * GTL = Gonzalo Tornaria <tornaria@cmat.edu.uy> | |
| * | |
| * This is a kludge so we don't need to modify end_request. | |
| * We put the req we take out after INIT_REQUEST in the requests list, | |
| * so that end_request will discard it. | |
| * | |
| * The bug could be present in other block devices, perhaps we | |
| * should modify INIT_REQUEST and end_request instead, and | |
| * change every block device.. | |
| * | |
| * Could be a race here?? Could e.g. a timer interrupt schedule() us? | |
| * If so, we should copy end_request here, and do it right.. (or | |
| * modify end_request and the block devices). | |
| * | |
| * In any case, the race here would be much small than it was, and | |
| * I couldn't reproduce.. | |
| * | |
| * The race could be: suppose CURRENT==NULL. We put our req in the list, | |
| * and we are scheduled. Other process takes over, and gets into | |
| * do_sbpcd_request. It sees CURRENT!=NULL (it is == to our req), so | |
| * proceeds. It ends, so CURRENT is now NULL.. Now we awake somewhere in | |
| * end_request, but now CURRENT==NULL... oops! | |
| * | |
| */ | |
| #undef DEBUG_GTL | |
| /*==========================================================================*/ | |
| /* | |
| * I/O request routine, called from Linux kernel. | |
| */ | |
| static void do_sbpcd_request(request_queue_t * q) | |
| { | |
| u_int block; | |
| u_int nsect; | |
| int status_tries, data_tries; | |
| struct request *req; | |
| struct sbpcd_drive *p; | |
| #ifdef DEBUG_GTL | |
| static int xx_nr=0; | |
| int xnr; | |
| #endif | |
| request_loop: | |
| #ifdef DEBUG_GTL | |
| xnr=++xx_nr; | |
| req = elv_next_request(q); | |
| if (!req) | |
| { | |
| printk( "do_sbpcd_request[%di](NULL), Pid:%d, Time:%li\n", | |
| xnr, current->pid, jiffies); | |
| printk( "do_sbpcd_request[%do](NULL) end 0 (null), Time:%li\n", | |
| xnr, jiffies); | |
| return; | |
| } | |
| printk(" do_sbpcd_request[%di](%p:%ld+%ld), Pid:%d, Time:%li\n", | |
| xnr, req, req->sector, req->nr_sectors, current->pid, jiffies); | |
| #endif | |
| req = elv_next_request(q); /* take out our request so no other */ | |
| if (!req) | |
| return; | |
| if (req -> sector == -1) | |
| end_request(req, 0); | |
| spin_unlock_irq(q->queue_lock); | |
| down(&ioctl_read_sem); | |
| if (rq_data_dir(elv_next_request(q)) != READ) | |
| { | |
| msg(DBG_INF, "bad cmd %d\n", req->cmd[0]); | |
| goto err_done; | |
| } | |
| p = req->rq_disk->private_data; | |
| #if OLD_BUSY | |
| while (busy_audio) sbp_sleep(HZ); /* wait a bit */ | |
| busy_data=1; | |
| #endif /* OLD_BUSY */ | |
| if (p->audio_state==audio_playing) goto err_done; | |
| if (p != current_drive) | |
| switch_drive(p); | |
| block = req->sector; /* always numbered as 512-byte-pieces */ | |
| nsect = req->nr_sectors; /* always counted as 512-byte-pieces */ | |
| msg(DBG_BSZ,"read sector %d (%d sectors)\n", block, nsect); | |
| #if 0 | |
| msg(DBG_MUL,"read LBA %d\n", block/4); | |
| #endif | |
| sbp_transfer(req); | |
| /* if we satisfied the request from the buffer, we're done. */ | |
| if (req->nr_sectors == 0) | |
| { | |
| #ifdef DEBUG_GTL | |
| printk(" do_sbpcd_request[%do](%p:%ld+%ld) end 2, Time:%li\n", | |
| xnr, req, req->sector, req->nr_sectors, jiffies); | |
| #endif | |
| up(&ioctl_read_sem); | |
| spin_lock_irq(q->queue_lock); | |
| end_request(req, 1); | |
| goto request_loop; | |
| } | |
| #ifdef FUTURE | |
| i=prepare(0,0); /* at moment not really a hassle check, but ... */ | |
| if (i!=0) | |
| msg(DBG_INF,"\"prepare\" tells error %d -- ignored\n", i); | |
| #endif /* FUTURE */ | |
| if (!st_spinning) cc_SpinUp(); | |
| for (data_tries=n_retries; data_tries > 0; data_tries--) | |
| { | |
| for (status_tries=3; status_tries > 0; status_tries--) | |
| { | |
| flags_cmd_out |= f_respo3; | |
| cc_ReadStatus(); | |
| if (sbp_status() != 0) break; | |
| if (st_check) cc_ReadError(); | |
| sbp_sleep(1); /* wait a bit, try again */ | |
| } | |
| if (status_tries == 0) | |
| { | |
| msg(DBG_INF,"sbp_status: failed after 3 tries in line %d\n", __LINE__); | |
| break; | |
| } | |
| sbp_read_cmd(req); | |
| sbp_sleep(0); | |
| if (sbp_data(req) != 0) | |
| { | |
| #ifdef SAFE_MIXED | |
| current_drive->has_data=2; /* is really a data disk */ | |
| #endif /* SAFE_MIXED */ | |
| #ifdef DEBUG_GTL | |
| printk(" do_sbpcd_request[%do](%p:%ld+%ld) end 3, Time:%li\n", | |
| xnr, req, req->sector, req->nr_sectors, jiffies); | |
| #endif | |
| up(&ioctl_read_sem); | |
| spin_lock_irq(q->queue_lock); | |
| end_request(req, 1); | |
| goto request_loop; | |
| } | |
| } | |
| err_done: | |
| #if OLD_BUSY | |
| busy_data=0; | |
| #endif /* OLD_BUSY */ | |
| #ifdef DEBUG_GTL | |
| printk(" do_sbpcd_request[%do](%p:%ld+%ld) end 4 (error), Time:%li\n", | |
| xnr, req, req->sector, req->nr_sectors, jiffies); | |
| #endif | |
| up(&ioctl_read_sem); | |
| sbp_sleep(0); /* wait a bit, try again */ | |
| spin_lock_irq(q->queue_lock); | |
| end_request(req, 0); | |
| goto request_loop; | |
| } | |
| /*==========================================================================*/ | |
| /* | |
| * build and send the READ command. | |
| */ | |
| static void sbp_read_cmd(struct request *req) | |
| { | |
| #undef OLD | |
| int i; | |
| int block; | |
| current_drive->sbp_first_frame=current_drive->sbp_last_frame=-1; /* purge buffer */ | |
| current_drive->sbp_current = 0; | |
| block=req->sector/4; | |
| if (block+current_drive->sbp_bufsiz <= current_drive->CDsize_frm) | |
| current_drive->sbp_read_frames = current_drive->sbp_bufsiz; | |
| else | |
| { | |
| current_drive->sbp_read_frames=current_drive->CDsize_frm-block; | |
| /* avoid reading past end of data */ | |
| if (current_drive->sbp_read_frames < 1) | |
| { | |
| msg(DBG_INF,"requested frame %d, CD size %d ???\n", | |
| block, current_drive->CDsize_frm); | |
| current_drive->sbp_read_frames=1; | |
| } | |
| } | |
| flags_cmd_out = f_putcmd | f_respo2 | f_ResponseStatus | f_obey_p_check; | |
| clr_cmdbuf(); | |
| if (famV_drive) | |
| { | |
| drvcmd[0]=CMDV_READ; | |
| lba2msf(block,&drvcmd[1]); /* msf-bcd format required */ | |
| bin2bcdx(&drvcmd[1]); | |
| bin2bcdx(&drvcmd[2]); | |
| bin2bcdx(&drvcmd[3]); | |
| drvcmd[4]=current_drive->sbp_read_frames>>8; | |
| drvcmd[5]=current_drive->sbp_read_frames&0xff; | |
| drvcmd[6]=0x02; /* flag "msf-bcd" */ | |
| } | |
| else if (fam0L_drive) | |
| { | |
| flags_cmd_out |= f_lopsta | f_getsta | f_bit1; | |
| if (current_drive->xa_byte==0x20) | |
| { | |
| cmd_type=READ_M2; | |
| drvcmd[0]=CMD0_READ_XA; /* "read XA frames", old drives */ | |
| drvcmd[1]=(block>>16)&0x0ff; | |
| drvcmd[2]=(block>>8)&0x0ff; | |
| drvcmd[3]=block&0x0ff; | |
| drvcmd[4]=(current_drive->sbp_read_frames>>8)&0x0ff; | |
| drvcmd[5]=current_drive->sbp_read_frames&0x0ff; | |
| } | |
| else | |
| { | |
| drvcmd[0]=CMD0_READ; /* "read frames", old drives */ | |
| if (current_drive->drv_type>=drv_201) | |
| { | |
| lba2msf(block,&drvcmd[1]); /* msf-bcd format required */ | |
| bin2bcdx(&drvcmd[1]); | |
| bin2bcdx(&drvcmd[2]); | |
| bin2bcdx(&drvcmd[3]); | |
| } | |
| else | |
| { | |
| drvcmd[1]=(block>>16)&0x0ff; | |
| drvcmd[2]=(block>>8)&0x0ff; | |
| drvcmd[3]=block&0x0ff; | |
| } | |
| drvcmd[4]=(current_drive->sbp_read_frames>>8)&0x0ff; | |
| drvcmd[5]=current_drive->sbp_read_frames&0x0ff; | |
| drvcmd[6]=(current_drive->drv_type<drv_201)?0:2; /* flag "lba or msf-bcd format" */ | |
| } | |
| } | |
| else if (fam1_drive) | |
| { | |
| drvcmd[0]=CMD1_READ; | |
| lba2msf(block,&drvcmd[1]); /* msf-bin format required */ | |
| drvcmd[5]=(current_drive->sbp_read_frames>>8)&0x0ff; | |
| drvcmd[6]=current_drive->sbp_read_frames&0x0ff; | |
| } | |
| else if (fam2_drive) | |
| { | |
| drvcmd[0]=CMD2_READ; | |
| lba2msf(block,&drvcmd[1]); /* msf-bin format required */ | |
| drvcmd[4]=(current_drive->sbp_read_frames>>8)&0x0ff; | |
| drvcmd[5]=current_drive->sbp_read_frames&0x0ff; | |
| drvcmd[6]=0x02; | |
| } | |
| else if (famT_drive) | |
| { | |
| drvcmd[0]=CMDT_READ; | |
| drvcmd[2]=(block>>24)&0x0ff; | |
| drvcmd[3]=(block>>16)&0x0ff; | |
| drvcmd[4]=(block>>8)&0x0ff; | |
| drvcmd[5]=block&0x0ff; | |
| drvcmd[7]=(current_drive->sbp_read_frames>>8)&0x0ff; | |
| drvcmd[8]=current_drive->sbp_read_frames&0x0ff; | |
| } | |
| flags_cmd_out=f_putcmd; | |
| response_count=0; | |
| i=cmd_out(); | |
| if (i<0) msg(DBG_INF,"error giving READ command: %0d\n", i); | |
| return; | |
| } | |
| /*==========================================================================*/ | |
| /* | |
| * Check the completion of the read-data command. On success, read | |
| * the current_drive->sbp_bufsiz * 2048 bytes of data from the disk into buffer. | |
| */ | |
| static int sbp_data(struct request *req) | |
| { | |
| int i=0, j=0, l, frame; | |
| u_int try=0; | |
| u_long timeout; | |
| u_char *p; | |
| u_int data_tries = 0; | |
| u_int data_waits = 0; | |
| u_int data_retrying = 0; | |
| int error_flag; | |
| int xa_count; | |
| int max_latency; | |
| int success; | |
| int wait; | |
| int duration; | |
| error_flag=0; | |
| success=0; | |
| #if LONG_TIMING | |
| max_latency=9*HZ; | |
| #else | |
| if (current_drive->f_multisession) max_latency=15*HZ; | |
| else max_latency=5*HZ; | |
| #endif | |
| duration=jiffies; | |
| for (frame=0;frame<current_drive->sbp_read_frames&&!error_flag; frame++) | |
| { | |
| SBPCD_CLI; | |
| del_timer(&data_timer); | |
| data_timer.expires=jiffies+max_latency; | |
| timed_out_data=0; | |
| add_timer(&data_timer); | |
| while (!timed_out_data) | |
| { | |
| if (current_drive->f_multisession) try=maxtim_data*4; | |
| else try=maxtim_data; | |
| msg(DBG_000,"sbp_data: CDi_status loop: try=%d.\n",try); | |
| for ( ; try!=0;try--) | |
| { | |
| j=inb(CDi_status); | |
| if (!(j&s_not_data_ready)) break; | |
| if (!(j&s_not_result_ready)) break; | |
| if (fam0LV_drive) if (j&s_attention) break; | |
| } | |
| if (!(j&s_not_data_ready)) goto data_ready; | |
| if (try==0) | |
| { | |
| if (data_retrying == 0) data_waits++; | |
| data_retrying = 1; | |
| msg(DBG_000,"sbp_data: CDi_status loop: sleeping.\n"); | |
| sbp_sleep(1); | |
| try = 1; | |
| } | |
| } | |
| msg(DBG_INF,"sbp_data: CDi_status loop expired.\n"); | |
| data_ready: | |
| del_timer(&data_timer); | |
| if (timed_out_data) | |
| { | |
| msg(DBG_INF,"sbp_data: CDi_status timeout (timed_out_data) (%02X).\n", j); | |
| error_flag++; | |
| } | |
| if (try==0) | |
| { | |
| msg(DBG_INF,"sbp_data: CDi_status timeout (try=0) (%02X).\n", j); | |
| error_flag++; | |
| } | |
| if (!(j&s_not_result_ready)) | |
| { | |
| msg(DBG_INF, "sbp_data: RESULT_READY where DATA_READY awaited (%02X).\n", j); | |
| response_count=20; | |
| j=ResponseInfo(); | |
| j=inb(CDi_status); | |
| } | |
| if (j&s_not_data_ready) | |
| { | |
| if ((current_drive->ored_ctl_adr&0x40)==0) | |
| msg(DBG_INF, "CD contains no data tracks.\n"); | |
| else msg(DBG_INF, "sbp_data: DATA_READY timeout (%02X).\n", j); | |
| error_flag++; | |
| } | |
| SBPCD_STI; | |
| if (error_flag) break; | |
| msg(DBG_000, "sbp_data: beginning to read.\n"); | |
| p = current_drive->sbp_buf + frame * CD_FRAMESIZE; | |
| if (sbpro_type==1) OUT(CDo_sel_i_d,1); | |
| if (cmd_type==READ_M2) { | |
| if (do_16bit) insw(CDi_data, xa_head_buf, CD_XA_HEAD>>1); | |
| else insb(CDi_data, xa_head_buf, CD_XA_HEAD); | |
| } | |
| if (do_16bit) insw(CDi_data, p, CD_FRAMESIZE>>1); | |
| else insb(CDi_data, p, CD_FRAMESIZE); | |
| if (cmd_type==READ_M2) { | |
| if (do_16bit) insw(CDi_data, xa_tail_buf, CD_XA_TAIL>>1); | |
| else insb(CDi_data, xa_tail_buf, CD_XA_TAIL); | |
| } | |
| current_drive->sbp_current++; | |
| if (sbpro_type==1) OUT(CDo_sel_i_d,0); | |
| if (cmd_type==READ_M2) | |
| { | |
| for (xa_count=0;xa_count<CD_XA_HEAD;xa_count++) | |
| sprintf(&msgbuf[xa_count*3], " %02X", xa_head_buf[xa_count]); | |
| msgbuf[xa_count*3]=0; | |
| msg(DBG_XA1,"xa head:%s\n", msgbuf); | |
| } | |
| data_retrying = 0; | |
| data_tries++; | |
| if (data_tries >= 1000) | |
| { | |
| msg(DBG_INF,"sbp_data() statistics: %d waits in %d frames.\n", data_waits, data_tries); | |
| data_waits = data_tries = 0; | |
| } | |
| } | |
| duration=jiffies-duration; | |
| msg(DBG_TEA,"time to read %d frames: %d jiffies .\n",frame,duration); | |
| if (famT_drive) | |
| { | |
| wait=8; | |
| do | |
| { | |
| if (teac==2) | |
| { | |
| if ((i=CDi_stat_loop_T()) == -1) break; | |
| } | |
| else | |
| { | |
| sbp_sleep(1); | |
| OUT(CDo_sel_i_d,0); | |
| i=inb(CDi_status); | |
| } | |
| if (!(i&s_not_data_ready)) | |
| { | |
| OUT(CDo_sel_i_d,1); | |
| j=0; | |
| do | |
| { | |
| if (do_16bit) i=inw(CDi_data); | |
| else i=inb(CDi_data); | |
| j++; | |
| i=inb(CDi_status); | |
| } | |
| while (!(i&s_not_data_ready)); | |
| msg(DBG_TEA, "==========too much data (%d bytes/words)==============.\n", j); | |
| } | |
| if (!(i&s_not_result_ready)) | |
| { | |
| OUT(CDo_sel_i_d,0); | |
| l=0; | |
| do | |
| { | |
| infobuf[l++]=inb(CDi_info); | |
| i=inb(CDi_status); | |
| } | |
| while (!(i&s_not_result_ready)); | |
| if (infobuf[0]==0x00) success=1; | |
| #if 1 | |
| for (j=0;j<l;j++) sprintf(&msgbuf[j*3], " %02X", infobuf[j]); | |
| msgbuf[j*3]=0; | |
| msg(DBG_TEA,"sbp_data info response:%s\n", msgbuf); | |
| #endif | |
| if (infobuf[0]==0x02) | |
| { | |
| error_flag++; | |
| do | |
| { | |
| ++recursion; | |
| if (recursion>1) msg(DBG_TEA,"cmd_out_T READ_ERR recursion (sbp_data): %d !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!\n",recursion); | |
| else msg(DBG_TEA,"sbp_data: CMDT_READ_ERR necessary.\n"); | |
| clr_cmdbuf(); | |
| drvcmd[0]=CMDT_READ_ERR; | |
| j=cmd_out_T(); /* !!! recursive here !!! */ | |
| --recursion; | |
| sbp_sleep(1); | |
| } | |
| while (j<0); | |
| current_drive->error_state=infobuf[2]; | |
| current_drive->b3=infobuf[3]; | |
| current_drive->b4=infobuf[4]; | |
| } | |
| break; | |
| } | |
| else | |
| { | |
| #if 0 | |
| msg(DBG_TEA, "============= waiting for result=================.\n"); | |
| sbp_sleep(1); | |
| #endif | |
| } | |
| } | |
| while (wait--); | |
| } | |
| if (error_flag) /* must have been spurious D_RDY or (ATTN&&!D_RDY) */ | |
| { | |
| msg(DBG_TEA, "================error flag: %d=================.\n", error_flag); | |
| msg(DBG_INF,"sbp_data: read aborted by drive.\n"); | |
| #if 1 | |
| i=cc_DriveReset(); /* ugly fix to prevent a hang */ | |
| #else | |
| i=cc_ReadError(); | |
| #endif | |
| return (0); | |
| } | |
| if (fam0LV_drive) | |
| { | |
| SBPCD_CLI; | |
| i=maxtim_data; | |
| for (timeout=jiffies+HZ; time_before(jiffies, timeout); timeout--) | |
| { | |
| for ( ;i!=0;i--) | |
| { | |
| j=inb(CDi_status); | |
| if (!(j&s_not_data_ready)) break; | |
| if (!(j&s_not_result_ready)) break; | |
| if (j&s_attention) break; | |
| } | |
| if (i != 0 || time_after_eq(jiffies, timeout)) break; | |
| sbp_sleep(0); | |
| i = 1; | |
| } | |
| if (i==0) msg(DBG_INF,"status timeout after READ.\n"); | |
| if (!(j&s_attention)) | |
| { | |
| msg(DBG_INF,"sbp_data: timeout waiting DRV_ATTN - retrying.\n"); | |
| i=cc_DriveReset(); /* ugly fix to prevent a hang */ | |
| SBPCD_STI; | |
| return (0); | |
| } | |
| SBPCD_STI; | |
| } | |
| #if 0 | |
| if (!success) | |
| #endif | |
| do | |
| { | |
| if (fam0LV_drive) cc_ReadStatus(); | |
| #if 1 | |
| if (famT_drive) msg(DBG_TEA, "================before ResponseStatus=================.\n", i); | |
| #endif | |
| i=ResponseStatus(); /* builds status_bits, returns orig. status (old) or faked p_success (new) */ | |
| #if 1 | |
| if (famT_drive) msg(DBG_TEA, "================ResponseStatus: %d=================.\n", i); | |
| #endif | |
| if (i<0) | |
| { | |
| msg(DBG_INF,"bad cc_ReadStatus after read: %02X\n", current_drive->status_bits); | |
| return (0); | |
| } | |
| } | |
| while ((fam0LV_drive)&&(!st_check)&&(!(i&p_success))); | |
| if (st_check) | |
| { | |
| i=cc_ReadError(); | |
| msg(DBG_INF,"cc_ReadError was necessary after read: %d\n",i); | |
| return (0); | |
| } | |
| if (fatal_err) | |
| { | |
| fatal_err=0; | |
| current_drive->sbp_first_frame=current_drive->sbp_last_frame=-1; /* purge buffer */ | |
| current_drive->sbp_current = 0; | |
| msg(DBG_INF,"sbp_data: fatal_err - retrying.\n"); | |
| return (0); | |
| } | |
| current_drive->sbp_first_frame = req -> sector / 4; | |
| current_drive->sbp_last_frame = current_drive->sbp_first_frame + current_drive->sbp_read_frames - 1; | |
| sbp_transfer(req); | |
| return (1); | |
| } | |
| /*==========================================================================*/ | |
| static int sbpcd_block_open(struct inode *inode, struct file *file) | |
| { | |
| struct sbpcd_drive *p = inode->i_bdev->bd_disk->private_data; | |
| return cdrom_open(p->sbpcd_infop, inode, file); | |
| } | |
| static int sbpcd_block_release(struct inode *inode, struct file *file) | |
| { | |
| struct sbpcd_drive *p = inode->i_bdev->bd_disk->private_data; | |
| return cdrom_release(p->sbpcd_infop, file); | |
| } | |
| static int sbpcd_block_ioctl(struct inode *inode, struct file *file, | |
| unsigned cmd, unsigned long arg) | |
| { | |
| struct sbpcd_drive *p = inode->i_bdev->bd_disk->private_data; | |
| struct cdrom_device_info *cdi = p->sbpcd_infop; | |
| int ret, i; | |
| ret = cdrom_ioctl(file, p->sbpcd_infop, inode, cmd, arg); | |
| if (ret != -ENOSYS) | |
| return ret; | |
| msg(DBG_IO2,"ioctl(%s, 0x%08lX, 0x%08lX)\n", cdi->name, cmd, arg); | |
| if (p->drv_id==-1) { | |
| msg(DBG_INF, "ioctl: bad device: %s\n", cdi->name); | |
| return (-ENXIO); /* no such drive */ | |
| } | |
| down(&ioctl_read_sem); | |
| if (p != current_drive) | |
| switch_drive(p); | |
| msg(DBG_IO2,"ioctl: device %s, request %04X\n",cdi->name,cmd); | |
| switch (cmd) /* Sun-compatible */ | |
| { | |
| case DDIOCSDBG: /* DDI Debug */ | |
| if (!capable(CAP_SYS_ADMIN)) RETURN_UP(-EPERM); | |
| i=sbpcd_dbg_ioctl(arg,1); | |
| RETURN_UP(i); | |
| case CDROMRESET: /* hard reset the drive */ | |
| msg(DBG_IOC,"ioctl: CDROMRESET entered.\n"); | |
| i=DriveReset(); | |
| current_drive->audio_state=0; | |
| RETURN_UP(i); | |
| case CDROMREADMODE1: | |
| msg(DBG_IOC,"ioctl: CDROMREADMODE1 requested.\n"); | |
| #ifdef SAFE_MIXED | |
| if (current_drive->has_data>1) RETURN_UP(-EBUSY); | |
| #endif /* SAFE_MIXED */ | |
| cc_ModeSelect(CD_FRAMESIZE); | |
| cc_ModeSense(); | |
| current_drive->mode=READ_M1; | |
| RETURN_UP(0); | |
| case CDROMREADMODE2: /* not usable at the moment */ | |
| msg(DBG_IOC,"ioctl: CDROMREADMODE2 requested.\n"); | |
| #ifdef SAFE_MIXED | |
| if (current_drive->has_data>1) RETURN_UP(-EBUSY); | |
| #endif /* SAFE_MIXED */ | |
| cc_ModeSelect(CD_FRAMESIZE_RAW1); | |
| cc_ModeSense(); | |
| current_drive->mode=READ_M2; | |
| RETURN_UP(0); | |
| case CDROMAUDIOBUFSIZ: /* configure the audio buffer size */ | |
| msg(DBG_IOC,"ioctl: CDROMAUDIOBUFSIZ entered.\n"); | |
| if (current_drive->sbp_audsiz>0) | |
| vfree(current_drive->aud_buf); | |
| current_drive->aud_buf=NULL; | |
| current_drive->sbp_audsiz=arg; | |
| if (current_drive->sbp_audsiz>16) | |
| { | |
| current_drive->sbp_audsiz = 0; | |
| RETURN_UP(current_drive->sbp_audsiz); | |
| } | |
| if (current_drive->sbp_audsiz>0) | |
| { | |
| current_drive->aud_buf=(u_char *) vmalloc(current_drive->sbp_audsiz*CD_FRAMESIZE_RAW); | |
| if (current_drive->aud_buf==NULL) | |
| { | |
| msg(DBG_INF,"audio buffer (%d frames) not available.\n",current_drive->sbp_audsiz); | |
| current_drive->sbp_audsiz=0; | |
| } | |
| else msg(DBG_INF,"audio buffer size: %d frames.\n",current_drive->sbp_audsiz); | |
| } | |
| RETURN_UP(current_drive->sbp_audsiz); | |
| case CDROMREADAUDIO: | |
| { /* start of CDROMREADAUDIO */ | |
| int i=0, j=0, frame, block=0; | |
| u_int try=0; | |
| u_long timeout; | |
| u_char *p; | |
| u_int data_tries = 0; | |
| u_int data_waits = 0; | |
| u_int data_retrying = 0; | |
| int status_tries; | |
| int error_flag; | |
| msg(DBG_IOC,"ioctl: CDROMREADAUDIO entered.\n"); | |
| if (fam0_drive) RETURN_UP(-EINVAL); | |
| if (famL_drive) RETURN_UP(-EINVAL); | |
| if (famV_drive) RETURN_UP(-EINVAL); | |
| if (famT_drive) RETURN_UP(-EINVAL); | |
| #ifdef SAFE_MIXED | |
| if (current_drive->has_data>1) RETURN_UP(-EBUSY); | |
| #endif /* SAFE_MIXED */ | |
| if (current_drive->aud_buf==NULL) RETURN_UP(-EINVAL); | |
| if (copy_from_user(&read_audio, (void __user *)arg, | |
| sizeof(struct cdrom_read_audio))) | |
| RETURN_UP(-EFAULT); | |
| if (read_audio.nframes < 0 || read_audio.nframes>current_drive->sbp_audsiz) RETURN_UP(-EINVAL); | |
| if (!access_ok(VERIFY_WRITE, read_audio.buf, | |
| read_audio.nframes*CD_FRAMESIZE_RAW)) | |
| RETURN_UP(-EFAULT); | |
| if (read_audio.addr_format==CDROM_MSF) /* MSF-bin specification of where to start */ | |
| block=msf2lba(&read_audio.addr.msf.minute); | |
| else if (read_audio.addr_format==CDROM_LBA) /* lba specification of where to start */ | |
| block=read_audio.addr.lba; | |
| else RETURN_UP(-EINVAL); | |
| #if 000 | |
| i=cc_SetSpeed(speed_150,0,0); | |
| if (i) msg(DBG_AUD,"read_audio: SetSpeed error %d\n", i); | |
| #endif | |
| msg(DBG_AUD,"read_audio: lba: %d, msf: %06X\n", | |
| block, blk2msf(block)); | |
| msg(DBG_AUD,"read_audio: before cc_ReadStatus.\n"); | |
| #if OLD_BUSY | |
| while (busy_data) sbp_sleep(HZ/10); /* wait a bit */ | |
| busy_audio=1; | |
| #endif /* OLD_BUSY */ | |
| error_flag=0; | |
| for (data_tries=5; data_tries>0; data_tries--) | |
| { | |
| msg(DBG_AUD,"data_tries=%d ...\n", data_tries); | |
| current_drive->mode=READ_AU; | |
| cc_ModeSelect(CD_FRAMESIZE_RAW); | |
| cc_ModeSense(); | |
| for (status_tries=3; status_tries > 0; status_tries--) | |
| { | |
| flags_cmd_out |= f_respo3; | |
| cc_ReadStatus(); | |
| if (sbp_status() != 0) break; | |
| if (st_check) cc_ReadError(); | |
| sbp_sleep(1); /* wait a bit, try again */ | |
| } | |
| if (status_tries == 0) | |
| { | |
| msg(DBG_AUD,"read_audio: sbp_status: failed after 3 tries in line %d.\n", __LINE__); | |
| continue; | |
| } | |
| msg(DBG_AUD,"read_audio: sbp_status: ok.\n"); | |
| flags_cmd_out = f_putcmd | f_respo2 | f_ResponseStatus | f_obey_p_check; | |
| if (fam0L_drive) | |
| { | |
| flags_cmd_out |= f_lopsta | f_getsta | f_bit1; | |
| cmd_type=READ_M2; | |
| drvcmd[0]=CMD0_READ_XA; /* "read XA frames", old drives */ | |
| drvcmd[1]=(block>>16)&0x000000ff; | |
| drvcmd[2]=(block>>8)&0x000000ff; | |
| drvcmd[3]=block&0x000000ff; | |
| drvcmd[4]=0; | |
| drvcmd[5]=read_audio.nframes; /* # of frames */ | |
| drvcmd[6]=0; | |
| } | |
| else if (fam1_drive) | |
| { | |
| drvcmd[0]=CMD1_READ; /* "read frames", new drives */ | |
| lba2msf(block,&drvcmd[1]); /* msf-bin format required */ | |
| drvcmd[4]=0; | |
| drvcmd[5]=0; | |
| drvcmd[6]=read_audio.nframes; /* # of frames */ | |
| } | |
| else if (fam2_drive) | |
| { | |
| drvcmd[0]=CMD2_READ_XA2; | |
| lba2msf(block,&drvcmd[1]); /* msf-bin format required */ | |
| drvcmd[4]=0; | |
| drvcmd[5]=read_audio.nframes; /* # of frames */ | |
| drvcmd[6]=0x11; /* raw mode */ | |
| } | |
| else if (famT_drive) /* CD-55A: not tested yet */ | |
| { | |
| } | |
| msg(DBG_AUD,"read_audio: before giving \"read\" command.\n"); | |
| flags_cmd_out=f_putcmd; | |
| response_count=0; | |
| i=cmd_out(); | |
| if (i<0) msg(DBG_INF,"error giving READ AUDIO command: %0d\n", i); | |
| sbp_sleep(0); | |
| msg(DBG_AUD,"read_audio: after giving \"read\" command.\n"); | |
| for (frame=1;frame<2 && !error_flag; frame++) | |
| { | |
| try=maxtim_data; | |
| for (timeout=jiffies+9*HZ; ; ) | |
| { | |
| for ( ; try!=0;try--) | |
| { | |
| j=inb(CDi_status); | |
| if (!(j&s_not_data_ready)) break; | |
| if (!(j&s_not_result_ready)) break; | |
| if (fam0L_drive) if (j&s_attention) break; | |
| } | |
| if (try != 0 || time_after_eq(jiffies, timeout)) break; | |
| if (data_retrying == 0) data_waits++; | |
| data_retrying = 1; | |
| sbp_sleep(1); | |
| try = 1; | |
| } | |
| if (try==0) | |
| { | |
| msg(DBG_INF,"read_audio: sbp_data: CDi_status timeout.\n"); | |
| error_flag++; | |
| break; | |
| } | |
| msg(DBG_AUD,"read_audio: sbp_data: CDi_status ok.\n"); | |
| if (j&s_not_data_ready) | |
| { | |
| msg(DBG_INF, "read_audio: sbp_data: DATA_READY timeout.\n"); | |
| error_flag++; | |
| break; | |
| } | |
| msg(DBG_AUD,"read_audio: before reading data.\n"); | |
| error_flag=0; | |
| p = current_drive->aud_buf; | |
| if (sbpro_type==1) OUT(CDo_sel_i_d,1); | |
| if (do_16bit) | |
| { | |
| u_short *p2 = (u_short *) p; | |
| for (; (u_char *) p2 < current_drive->aud_buf + read_audio.nframes*CD_FRAMESIZE_RAW;) | |
| { | |
| if ((inb_p(CDi_status)&s_not_data_ready)) continue; | |
| /* get one sample */ | |
| *p2++ = inw_p(CDi_data); | |
| *p2++ = inw_p(CDi_data); | |
| } | |
| } else { | |
| for (; p < current_drive->aud_buf + read_audio.nframes*CD_FRAMESIZE_RAW;) | |
| { | |
| if ((inb_p(CDi_status)&s_not_data_ready)) continue; | |
| /* get one sample */ | |
| *p++ = inb_p(CDi_data); | |
| *p++ = inb_p(CDi_data); | |
| *p++ = inb_p(CDi_data); | |
| *p++ = inb_p(CDi_data); | |
| } | |
| } | |
| if (sbpro_type==1) OUT(CDo_sel_i_d,0); | |
| data_retrying = 0; | |
| } | |
| msg(DBG_AUD,"read_audio: after reading data.\n"); | |
| if (error_flag) /* must have been spurious D_RDY or (ATTN&&!D_RDY) */ | |
| { | |
| msg(DBG_AUD,"read_audio: read aborted by drive\n"); | |
| #if 0000 | |
| i=cc_DriveReset(); /* ugly fix to prevent a hang */ | |
| #else | |
| i=cc_ReadError(); | |
| #endif | |
| continue; | |
| } | |
| if (fam0L_drive) | |
| { | |
| i=maxtim_data; | |
| for (timeout=jiffies+9*HZ; time_before(jiffies, timeout); timeout--) | |
| { | |
| for ( ;i!=0;i--) | |
| { | |
| j=inb(CDi_status); | |
| if (!(j&s_not_data_ready)) break; | |
| if (!(j&s_not_result_ready)) break; | |
| if (j&s_attention) break; | |
| } | |
| if (i != 0 || time_after_eq(jiffies, timeout)) break; | |
| sbp_sleep(0); | |
| i = 1; | |
| } | |
| if (i==0) msg(DBG_AUD,"read_audio: STATUS TIMEOUT AFTER READ"); | |
| if (!(j&s_attention)) | |
| { | |
| msg(DBG_AUD,"read_audio: sbp_data: timeout waiting DRV_ATTN - retrying\n"); | |
| i=cc_DriveReset(); /* ugly fix to prevent a hang */ | |
| continue; | |
| } | |
| } | |
| do | |
| { | |
| if (fam0L_drive) cc_ReadStatus(); | |
| i=ResponseStatus(); /* builds status_bits, returns orig. status (old) or faked p_success (new) */ | |
| if (i<0) { msg(DBG_AUD, | |
| "read_audio: cc_ReadStatus error after read: %02X\n", | |
| current_drive->status_bits); | |
| continue; /* FIXME */ | |
| } | |
| } | |
| while ((fam0L_drive)&&(!st_check)&&(!(i&p_success))); | |
| if (st_check) | |
| { | |
| i=cc_ReadError(); | |
| msg(DBG_AUD,"read_audio: cc_ReadError was necessary after read: %02X\n",i); | |
| continue; | |
| } | |
| if (copy_to_user(read_audio.buf, | |
| current_drive->aud_buf, | |
| read_audio.nframes * CD_FRAMESIZE_RAW)) | |
| RETURN_UP(-EFAULT); | |
| msg(DBG_AUD,"read_audio: copy_to_user done.\n"); | |
| break; | |
| } | |
| cc_ModeSelect(CD_FRAMESIZE); | |
| cc_ModeSense(); | |
| current_drive->mode=READ_M1; | |
| #if OLD_BUSY | |
| busy_audio=0; | |
| #endif /* OLD_BUSY */ | |
| if (data_tries == 0) | |
| { | |
| msg(DBG_AUD,"read_audio: failed after 5 tries in line %d.\n", __LINE__); | |
| RETURN_UP(-EIO); | |
| } | |
| msg(DBG_AUD,"read_audio: successful return.\n"); | |
| RETURN_UP(0); | |
| } /* end of CDROMREADAUDIO */ | |
| default: | |
| msg(DBG_IOC,"ioctl: unknown function request %04X\n", cmd); | |
| RETURN_UP(-EINVAL); | |
| } /* end switch(cmd) */ | |
| } | |
| static int sbpcd_block_media_changed(struct gendisk *disk) | |
| { | |
| struct sbpcd_drive *p = disk->private_data; | |
| return cdrom_media_changed(p->sbpcd_infop); | |
| } | |
| static struct block_device_operations sbpcd_bdops = | |
| { | |
| .owner = THIS_MODULE, | |
| .open = sbpcd_block_open, | |
| .release = sbpcd_block_release, | |
| .ioctl = sbpcd_block_ioctl, | |
| .media_changed = sbpcd_block_media_changed, | |
| }; | |
| /*==========================================================================*/ | |
| /* | |
| * Open the device special file. Check that a disk is in. Read TOC. | |
| */ | |
| static int sbpcd_open(struct cdrom_device_info *cdi, int purpose) | |
| { | |
| struct sbpcd_drive *p = cdi->handle; | |
| down(&ioctl_read_sem); | |
| switch_drive(p); | |
| /* | |
| * try to keep an "open" counter here and lock the door if 0->1. | |
| */ | |
| msg(DBG_LCK,"open_count: %d -> %d\n", | |
| current_drive->open_count,current_drive->open_count+1); | |
| if (++current_drive->open_count<=1) | |
| { | |
| int i; | |
| i=LockDoor(); | |
| current_drive->open_count=1; | |
| if (famT_drive) msg(DBG_TEA,"sbpcd_open: before i=DiskInfo();.\n"); | |
| i=DiskInfo(); | |
| if (famT_drive) msg(DBG_TEA,"sbpcd_open: after i=DiskInfo();.\n"); | |
| if ((current_drive->ored_ctl_adr&0x40)==0) | |
| { | |
| msg(DBG_INF,"CD contains no data tracks.\n"); | |
| #ifdef SAFE_MIXED | |
| current_drive->has_data=0; | |
| #endif /* SAFE_MIXED */ | |
| } | |
| #ifdef SAFE_MIXED | |
| else if (current_drive->has_data<1) current_drive->has_data=1; | |
| #endif /* SAFE_MIXED */ | |
| } | |
| if (!st_spinning) cc_SpinUp(); | |
| RETURN_UP(0); | |
| } | |
| /*==========================================================================*/ | |
| /* | |
| * On close, we flush all sbp blocks from the buffer cache. | |
| */ | |
| static void sbpcd_release(struct cdrom_device_info * cdi) | |
| { | |
| struct sbpcd_drive *p = cdi->handle; | |
| if (p->drv_id==-1) { | |
| msg(DBG_INF, "release: bad device: %s\n", cdi->name); | |
| return; | |
| } | |
| down(&ioctl_read_sem); | |
| switch_drive(p); | |
| /* | |
| * try to keep an "open" counter here and unlock the door if 1->0. | |
| */ | |
| msg(DBG_LCK,"open_count: %d -> %d\n", | |
| p->open_count,p->open_count-1); | |
| if (p->open_count>-2) /* CDROMEJECT may have been done */ | |
| { | |
| if (--p->open_count<=0) | |
| { | |
| p->sbp_first_frame=p->sbp_last_frame=-1; | |
| if (p->audio_state!=audio_playing) | |
| if (p->f_eject) cc_SpinDown(); | |
| p->diskstate_flags &= ~cd_size_bit; | |
| p->open_count=0; | |
| #ifdef SAFE_MIXED | |
| p->has_data=0; | |
| #endif /* SAFE_MIXED */ | |
| } | |
| } | |
| up(&ioctl_read_sem); | |
| return ; | |
| } | |
| /*==========================================================================*/ | |
| /* | |
| * | |
| */ | |
| static int sbpcd_media_changed( struct cdrom_device_info *cdi, int disc_nr); | |
| static struct cdrom_device_ops sbpcd_dops = { | |
| .open = sbpcd_open, | |
| .release = sbpcd_release, | |
| .drive_status = sbpcd_drive_status, | |
| .media_changed = sbpcd_media_changed, | |
| .tray_move = sbpcd_tray_move, | |
| .lock_door = sbpcd_lock_door, | |
| .select_speed = sbpcd_select_speed, | |
| .get_last_session = sbpcd_get_last_session, | |
| .get_mcn = sbpcd_get_mcn, | |
| .reset = sbpcd_reset, | |
| .audio_ioctl = sbpcd_audio_ioctl, | |
| .capability = CDC_CLOSE_TRAY | CDC_OPEN_TRAY | CDC_LOCK | | |
| CDC_MULTI_SESSION | CDC_MEDIA_CHANGED | | |
| CDC_MCN | CDC_PLAY_AUDIO, | |
| .n_minors = 1, | |
| }; | |
| /*==========================================================================*/ | |
| /* | |
| * accept "kernel command line" parameters | |
| * (suggested by Peter MacDonald with SLS 1.03) | |
| * | |
| * This is only implemented for the first controller. Should be enough to | |
| * allow installing with a "strange" distribution kernel. | |
| * | |
| * use: tell LILO: | |
| * sbpcd=0x230,SoundBlaster | |
| * or | |
| * sbpcd=0x300,LaserMate | |
| * or | |
| * sbpcd=0x338,SoundScape | |
| * or | |
| * sbpcd=0x2C0,Teac16bit | |
| * | |
| * (upper/lower case sensitive here - but all-lowercase is ok!!!). | |
| * | |
| * the address value has to be the CDROM PORT ADDRESS - | |
| * not the soundcard base address. | |
| * For the SPEA/SoundScape setup, DO NOT specify the "configuration port" | |
| * address, but the address which is really used for the CDROM (usually 8 | |
| * bytes above). | |
| * | |
| */ | |
| int sbpcd_setup(char *s) | |
| { | |
| #ifndef MODULE | |
| int p[4]; | |
| (void)get_options(s, ARRAY_SIZE(p), p); | |
| setup_done++; | |
| msg(DBG_INI,"sbpcd_setup called with %04X,%s\n",p[1], s); | |
| sbpro_type=0; /* default: "LaserMate" */ | |
| if (p[0]>1) sbpro_type=p[2]; | |
| else if (!strcmp(s,str_sb)) sbpro_type=1; | |
| else if (!strcmp(s,str_sb_l)) sbpro_type=1; | |
| else if (!strcmp(s,str_sp)) sbpro_type=2; | |
| else if (!strcmp(s,str_sp_l)) sbpro_type=2; | |
| else if (!strcmp(s,str_ss)) sbpro_type=2; | |
| else if (!strcmp(s,str_ss_l)) sbpro_type=2; | |
| else if (!strcmp(s,str_t16)) sbpro_type=3; | |
| else if (!strcmp(s,str_t16_l)) sbpro_type=3; | |
| if (p[0]>0) sbpcd_ioaddr=p[1]; | |
| if (p[0]>2) max_drives=p[3]; | |
| #else | |
| sbpcd_ioaddr = sbpcd[0]; | |
| sbpro_type = sbpcd[1]; | |
| #endif | |
| CDo_command=sbpcd_ioaddr; | |
| CDi_info=sbpcd_ioaddr; | |
| CDi_status=sbpcd_ioaddr+1; | |
| CDo_sel_i_d=sbpcd_ioaddr+1; | |
| CDo_reset=sbpcd_ioaddr+2; | |
| CDo_enable=sbpcd_ioaddr+3; | |
| f_16bit=0; | |
| if ((sbpro_type==1)||(sbpro_type==3)) | |
| { | |
| CDi_data=sbpcd_ioaddr; | |
| if (sbpro_type==3) | |
| { | |
| f_16bit=1; | |
| sbpro_type=1; | |
| } | |
| } | |
| else CDi_data=sbpcd_ioaddr+2; | |
| return 1; | |
| } | |
| __setup("sbpcd=", sbpcd_setup); | |
| /*==========================================================================*/ | |
| /* | |
| * Sequoia S-1000 CD-ROM Interface Configuration | |
| * as used within SPEA Media FX, Ensonic SoundScape and some Reveal cards | |
| * The soundcard has to get jumpered for the interface type "Panasonic" | |
| * (not Sony or Mitsumi) and to get soft-configured for | |
| * -> configuration port address | |
| * -> CDROM port offset (num_ports): has to be 8 here. Possibly this | |
| * offset value determines the interface type (none, Panasonic, | |
| * Mitsumi, Sony). | |
| * The interface uses a configuration port (0x320, 0x330, 0x340, 0x350) | |
| * some bytes below the real CDROM address. | |
| * | |
| * For the Panasonic style (LaserMate) interface and the configuration | |
| * port 0x330, we have to use an offset of 8; so, the real CDROM port | |
| * address is 0x338. | |
| */ | |
| static int __init config_spea(void) | |
| { | |
| /* | |
| * base address offset between configuration port and CDROM port, | |
| * this probably defines the interface type | |
| * 2 (type=??): 0x00 | |
| * 8 (type=LaserMate):0x10 | |
| * 16 (type=??):0x20 | |
| * 32 (type=??):0x30 | |
| */ | |
| int n_ports=0x10; | |
| int irq_number=0; /* off:0x00, 2/9:0x01, 7:0x03, 12:0x05, 15:0x07 */ | |
| int dma_channel=0; /* off: 0x00, 0:0x08, 1:0x18, 3:0x38, 5:0x58, 6:0x68 */ | |
| int dack_polarity=0; /* L:0x00, H:0x80 */ | |
| int drq_polarity=0x40; /* L:0x00, H:0x40 */ | |
| int i; | |
| #define SPEA_REG_1 sbpcd_ioaddr-0x08+4 | |
| #define SPEA_REG_2 sbpcd_ioaddr-0x08+5 | |
| OUT(SPEA_REG_1,0xFF); | |
| i=inb(SPEA_REG_1); | |
| if (i!=0x0F) | |
| { | |
| msg(DBG_SEQ,"no SPEA interface at %04X present.\n", sbpcd_ioaddr); | |
| return (-1); /* no interface found */ | |
| } | |
| OUT(SPEA_REG_1,0x04); | |
| OUT(SPEA_REG_2,0xC0); | |
| OUT(SPEA_REG_1,0x05); | |
| OUT(SPEA_REG_2,0x10|drq_polarity|dack_polarity); | |
| #if 1 | |
| #define SPEA_PATTERN 0x80 | |
| #else | |
| #define SPEA_PATTERN 0x00 | |
| #endif | |
| OUT(SPEA_REG_1,0x06); | |
| OUT(SPEA_REG_2,dma_channel|irq_number|SPEA_PATTERN); | |
| OUT(SPEA_REG_2,dma_channel|irq_number|SPEA_PATTERN); | |
| OUT(SPEA_REG_1,0x09); | |
| i=(inb(SPEA_REG_2)&0xCF)|n_ports; | |
| OUT(SPEA_REG_2,i); | |
| sbpro_type = 0; /* acts like a LaserMate interface now */ | |
| msg(DBG_SEQ,"found SoundScape interface at %04X.\n", sbpcd_ioaddr); | |
| return (0); | |
| } | |
| /*==========================================================================*/ | |
| /* | |
| * Test for presence of drive and initialize it. | |
| * Called once at boot or load time. | |
| */ | |
| /* FIXME: cleanups after failed allocations are too ugly for words */ | |
| #ifdef MODULE | |
| int __init __sbpcd_init(void) | |
| #else | |
| int __init sbpcd_init(void) | |
| #endif | |
| { | |
| int i=0, j=0; | |
| int addr[2]={1, CDROM_PORT}; | |
| int port_index; | |
| sti(); | |
| msg(DBG_INF,"sbpcd.c %s\n", VERSION); | |
| #ifndef MODULE | |
| #if DISTRIBUTION | |
| if (!setup_done) | |
| { | |
| msg(DBG_INF,"Looking for Matsushita/Panasonic, CreativeLabs, Longshine, TEAC CD-ROM drives\n"); | |
| msg(DBG_INF,"= = = = = = = = = = W A R N I N G = = = = = = = = = =\n"); | |
| msg(DBG_INF,"Auto-Probing can cause a hang (f.e. touching an NE2000 card).\n"); | |
| msg(DBG_INF,"If that happens, you have to reboot and use the\n"); | |
| msg(DBG_INF,"LILO (kernel) command line feature like:\n"); | |
| msg(DBG_INF," LILO boot: ... sbpcd=0x230,SoundBlaster\n"); | |
| msg(DBG_INF,"or like:\n"); | |
| msg(DBG_INF," LILO boot: ... sbpcd=0x300,LaserMate\n"); | |
| msg(DBG_INF,"or like:\n"); | |
| msg(DBG_INF," LILO boot: ... sbpcd=0x338,SoundScape\n"); | |
| msg(DBG_INF,"with your REAL address.\n"); | |
| msg(DBG_INF,"= = = = = = = = = = END of WARNING = = = = = == = = =\n"); | |
| } | |
| #endif /* DISTRIBUTION */ | |
| sbpcd[0]=sbpcd_ioaddr; /* possibly changed by kernel command line */ | |
| sbpcd[1]=sbpro_type; /* possibly changed by kernel command line */ | |
| #endif /* MODULE */ | |
| for (port_index=0;port_index<NUM_PROBE;port_index+=2) | |
| { | |
| addr[1]=sbpcd[port_index]; | |
| if (addr[1]==0) break; | |
| if (check_region(addr[1],4)) | |
| { | |
| msg(DBG_INF,"check_region: %03X is not free.\n",addr[1]); | |
| continue; | |
| } | |
| if (sbpcd[port_index+1]==2) type=str_sp; | |
| else if (sbpcd[port_index+1]==1) type=str_sb; | |
| else if (sbpcd[port_index+1]==3) type=str_t16; | |
| else type=str_lm; | |
| sbpcd_setup((char *)type); | |
| #if DISTRIBUTION | |
| msg(DBG_INF,"Scanning 0x%X (%s)...\n", CDo_command, type); | |
| #endif /* DISTRIBUTION */ | |
| if (sbpcd[port_index+1]==2) | |
| { | |
| i=config_spea(); | |
| if (i<0) continue; | |
| } | |
| #ifdef PATH_CHECK | |
| if (check_card(addr[1])) continue; | |
| #endif /* PATH_CHECK */ | |
| i=check_drives(); | |
| msg(DBG_INI,"check_drives done.\n"); | |
| if (i>=0) break; /* drive found */ | |
| } /* end of cycling through the set of possible I/O port addresses */ | |
| if (ndrives==0) | |
| { | |
| msg(DBG_INF, "No drive found.\n"); | |
| #ifdef MODULE | |
| return -EIO; | |
| #else | |
| goto init_done; | |
| #endif /* MODULE */ | |
| } | |
| if (port_index>0) | |
| { | |
| msg(DBG_INF, "You should read Documentation/cdrom/sbpcd\n"); | |
| msg(DBG_INF, "and then configure sbpcd.h for your hardware.\n"); | |
| } | |
| check_datarate(); | |
| msg(DBG_INI,"check_datarate done.\n"); | |
| for (j=0;j<NR_SBPCD;j++) | |
| { | |
| struct sbpcd_drive *p = D_S + j; | |
| if (p->drv_id==-1) | |
| continue; | |
| switch_drive(p); | |
| #if 1 | |
| if (!famL_drive) cc_DriveReset(); | |
| #endif | |
| if (!st_spinning) cc_SpinUp(); | |
| p->sbp_first_frame = -1; /* First frame in buffer */ | |
| p->sbp_last_frame = -1; /* Last frame in buffer */ | |
| p->sbp_read_frames = 0; /* Number of frames being read to buffer */ | |
| p->sbp_current = 0; /* Frame being currently read */ | |
| p->CD_changed=1; | |
| p->frame_size=CD_FRAMESIZE; | |
| p->f_eject=0; | |
| #if EJECT | |
| if (!fam0_drive) p->f_eject=1; | |
| #endif /* EJECT */ | |
| cc_ReadStatus(); | |
| i=ResponseStatus(); /* returns orig. status or p_busy_new */ | |
| if (famT_drive) i=ResponseStatus(); /* returns orig. status or p_busy_new */ | |
| if (i<0) | |
| { | |
| if (i!=-402) | |
| msg(DBG_INF,"init: ResponseStatus returns %d.\n",i); | |
| } | |
| else | |
| { | |
| if (st_check) | |
| { | |
| i=cc_ReadError(); | |
| msg(DBG_INI,"init: cc_ReadError returns %d\n",i); | |
| } | |
| } | |
| msg(DBG_INI,"init: first GetStatus: %d\n",i); | |
| msg(DBG_LCS,"init: first GetStatus: error_byte=%d\n", | |
| p->error_byte); | |
| if (p->error_byte==aud_12) | |
| { | |
| timeout=jiffies+2*HZ; | |
| do | |
| { | |
| i=GetStatus(); | |
| msg(DBG_INI,"init: second GetStatus: %02X\n",i); | |
| msg(DBG_LCS, | |
| "init: second GetStatus: error_byte=%d\n", | |
| p->error_byte); | |
| if (i<0) break; | |
| if (!st_caddy_in) break; | |
| } | |
| while ((!st_diskok)||time_after(jiffies, timeout)); | |
| } | |
| i=SetSpeed(); | |
| if (i>=0) p->CD_changed=1; | |
| } | |
| if (!request_region(CDo_command,4,major_name)) | |
| { | |
| printk(KERN_WARNING "sbpcd: Unable to request region 0x%x\n", CDo_command); | |
| return -EIO; | |
| } | |
| /* | |
| * Turn on the CD audio channels. | |
| * The addresses are obtained from SOUND_BASE (see sbpcd.h). | |
| */ | |
| #if SOUND_BASE | |
| OUT(MIXER_addr,MIXER_CD_Volume); /* select SB Pro mixer register */ | |
| OUT(MIXER_data,0xCC); /* one nibble per channel, max. value: 0xFF */ | |
| #endif /* SOUND_BASE */ | |
| if (register_blkdev(MAJOR_NR, major_name)) { | |
| #ifdef MODULE | |
| return -EIO; | |
| #else | |
| goto init_done; | |
| #endif /* MODULE */ | |
| } | |
| /* | |
| * init error handling is broken beyond belief in this driver... | |
| */ | |
| sbpcd_queue = blk_init_queue(do_sbpcd_request, &sbpcd_lock); | |
| if (!sbpcd_queue) { | |
| release_region(CDo_command,4); | |
| unregister_blkdev(MAJOR_NR, major_name); | |
| return -ENOMEM; | |
| } | |
| for (j=0;j<NR_SBPCD;j++) | |
| { | |
| struct cdrom_device_info * sbpcd_infop; | |
| struct gendisk *disk; | |
| struct sbpcd_drive *p = D_S + j; | |
| if (p->drv_id==-1) continue; | |
| switch_drive(p); | |
| #ifdef SAFE_MIXED | |
| p->has_data=0; | |
| #endif /* SAFE_MIXED */ | |
| /* | |
| * allocate memory for the frame buffers | |
| */ | |
| p->aud_buf=NULL; | |
| p->sbp_audsiz=0; | |
| p->sbp_bufsiz=buffers; | |
| if (p->drv_type&drv_fam1) | |
| if (READ_AUDIO>0) | |
| p->sbp_audsiz = READ_AUDIO; | |
| p->sbp_buf=(u_char *) vmalloc(buffers*CD_FRAMESIZE); | |
| if (!p->sbp_buf) { | |
| msg(DBG_INF,"data buffer (%d frames) not available.\n", | |
| buffers); | |
| if ((unregister_blkdev(MAJOR_NR, major_name) == -EINVAL)) | |
| { | |
| printk("Can't unregister %s\n", major_name); | |
| } | |
| release_region(CDo_command,4); | |
| blk_cleanup_queue(sbpcd_queue); | |
| return -EIO; | |
| } | |
| #ifdef MODULE | |
| msg(DBG_INF,"data buffer size: %d frames.\n",buffers); | |
| #endif /* MODULE */ | |
| if (p->sbp_audsiz>0) | |
| { | |
| p->aud_buf=(u_char *) vmalloc(p->sbp_audsiz*CD_FRAMESIZE_RAW); | |
| if (p->aud_buf==NULL) msg(DBG_INF,"audio buffer (%d frames) not available.\n",p->sbp_audsiz); | |
| else msg(DBG_INF,"audio buffer size: %d frames.\n",p->sbp_audsiz); | |
| } | |
| sbpcd_infop = vmalloc(sizeof (struct cdrom_device_info)); | |
| if (sbpcd_infop == NULL) | |
| { | |
| release_region(CDo_command,4); | |
| blk_cleanup_queue(sbpcd_queue); | |
| return -ENOMEM; | |
| } | |
| memset(sbpcd_infop, 0, sizeof(struct cdrom_device_info)); | |
| sbpcd_infop->ops = &sbpcd_dops; | |
| sbpcd_infop->speed = 2; | |
| sbpcd_infop->capacity = 1; | |
| sprintf(sbpcd_infop->name, "sbpcd%d", j); | |
| sbpcd_infop->handle = p; | |
| p->sbpcd_infop = sbpcd_infop; | |
| disk = alloc_disk(1); | |
| disk->major = MAJOR_NR; | |
| disk->first_minor = j; | |
| disk->fops = &sbpcd_bdops; | |
| strcpy(disk->disk_name, sbpcd_infop->name); | |
| disk->flags = GENHD_FL_CD; | |
| p->disk = disk; | |
| if (register_cdrom(sbpcd_infop)) | |
| { | |
| printk(" sbpcd: Unable to register with Uniform CD-ROm driver\n"); | |
| } | |
| disk->private_data = p; | |
| disk->queue = sbpcd_queue; | |
| add_disk(disk); | |
| } | |
| blk_queue_hardsect_size(sbpcd_queue, CD_FRAMESIZE); | |
| #ifndef MODULE | |
| init_done: | |
| #endif | |
| return 0; | |
| } | |
| /*==========================================================================*/ | |
| #ifdef MODULE | |
| static void sbpcd_exit(void) | |
| { | |
| int j; | |
| if ((unregister_blkdev(MAJOR_NR, major_name) == -EINVAL)) | |
| { | |
| msg(DBG_INF, "What's that: can't unregister %s.\n", major_name); | |
| return; | |
| } | |
| release_region(CDo_command,4); | |
| blk_cleanup_queue(sbpcd_queue); | |
| for (j=0;j<NR_SBPCD;j++) | |
| { | |
| if (D_S[j].drv_id==-1) continue; | |
| del_gendisk(D_S[j].disk); | |
| put_disk(D_S[j].disk); | |
| vfree(D_S[j].sbp_buf); | |
| if (D_S[j].sbp_audsiz>0) | |
| vfree(D_S[j].aud_buf); | |
| if ((unregister_cdrom(D_S[j].sbpcd_infop) == -EINVAL)) | |
| { | |
| msg(DBG_INF, "What's that: can't unregister info %s.\n", major_name); | |
| return; | |
| } | |
| vfree(D_S[j].sbpcd_infop); | |
| } | |
| msg(DBG_INF, "%s module released.\n", major_name); | |
| } | |
| module_init(__sbpcd_init) /*HACK!*/; | |
| module_exit(sbpcd_exit); | |
| #endif /* MODULE */ | |
| static int sbpcd_media_changed(struct cdrom_device_info *cdi, int disc_nr) | |
| { | |
| struct sbpcd_drive *p = cdi->handle; | |
| msg(DBG_CHK,"media_check (%s) called\n", cdi->name); | |
| if (p->CD_changed==0xFF) | |
| { | |
| p->CD_changed=0; | |
| msg(DBG_CHK,"medium changed (drive %s)\n", cdi->name); | |
| current_drive->diskstate_flags &= ~toc_bit; | |
| /* we *don't* need invalidate here, it's done by caller */ | |
| current_drive->diskstate_flags &= ~cd_size_bit; | |
| #ifdef SAFE_MIXED | |
| current_drive->has_data=0; | |
| #endif /* SAFE_MIXED */ | |
| return (1); | |
| } | |
| else | |
| return (0); | |
| } | |
| MODULE_LICENSE("GPL"); | |
| /* FIXME: Old modules.conf claims MATSUSHITA_CDROM2_MAJOR and CDROM3, but | |
| AFAICT this doesn't support those majors, so why? --RR 30 Jul 2003 */ | |
| MODULE_ALIAS_BLOCKDEV_MAJOR(MATSUSHITA_CDROM_MAJOR); | |
| /*==========================================================================*/ | |
| /* | |
| * Overrides for Emacs so that we follow Linus's tabbing style. | |
| * Emacs will notice this stuff at the end of the file and automatically | |
| * adjust the settings for this buffer only. This must remain at the end | |
| * of the file. | |
| * --------------------------------------------------------------------------- | |
| * Local variables: | |
| * c-indent-level: 8 | |
| * c-brace-imaginary-offset: 0 | |
| * c-brace-offset: -8 | |
| * c-argdecl-indent: 8 | |
| * c-label-offset: -8 | |
| * c-continued-statement-offset: 8 | |
| * c-continued-brace-offset: 0 | |
| * End: | |
| */ | |