| /* | |
| * Allwinner SoCs hstimer driver. | |
| * | |
| * Copyright (C) 2013 Maxime Ripard | |
| * | |
| * Maxime Ripard <maxime.ripard@free-electrons.com> | |
| * | |
| * This file is licensed under the terms of the GNU General Public | |
| * License version 2. This program is licensed "as is" without any | |
| * warranty of any kind, whether express or implied. | |
| */ | |
| #include <linux/clk.h> | |
| #include <linux/clockchips.h> | |
| #include <linux/delay.h> | |
| #include <linux/interrupt.h> | |
| #include <linux/irq.h> | |
| #include <linux/irqreturn.h> | |
| #include <linux/reset.h> | |
| #include <linux/sched_clock.h> | |
| #include <linux/of.h> | |
| #include <linux/of_address.h> | |
| #include <linux/of_irq.h> | |
| #define TIMER_IRQ_EN_REG 0x00 | |
| #define TIMER_IRQ_EN(val) BIT(val) | |
| #define TIMER_IRQ_ST_REG 0x04 | |
| #define TIMER_CTL_REG(val) (0x20 * (val) + 0x10) | |
| #define TIMER_CTL_ENABLE BIT(0) | |
| #define TIMER_CTL_RELOAD BIT(1) | |
| #define TIMER_CTL_CLK_PRES(val) (((val) & 0x7) << 4) | |
| #define TIMER_CTL_ONESHOT BIT(7) | |
| #define TIMER_INTVAL_LO_REG(val) (0x20 * (val) + 0x14) | |
| #define TIMER_INTVAL_HI_REG(val) (0x20 * (val) + 0x18) | |
| #define TIMER_CNTVAL_LO_REG(val) (0x20 * (val) + 0x1c) | |
| #define TIMER_CNTVAL_HI_REG(val) (0x20 * (val) + 0x20) | |
| #define TIMER_SYNC_TICKS 3 | |
| static void __iomem *timer_base; | |
| static u32 ticks_per_jiffy; | |
| /* | |
| * When we disable a timer, we need to wait at least for 2 cycles of | |
| * the timer source clock. We will use for that the clocksource timer | |
| * that is already setup and runs at the same frequency than the other | |
| * timers, and we never will be disabled. | |
| */ | |
| static void sun5i_clkevt_sync(void) | |
| { | |
| u32 old = readl(timer_base + TIMER_CNTVAL_LO_REG(1)); | |
| while ((old - readl(timer_base + TIMER_CNTVAL_LO_REG(1))) < TIMER_SYNC_TICKS) | |
| cpu_relax(); | |
| } | |
| static void sun5i_clkevt_time_stop(u8 timer) | |
| { | |
| u32 val = readl(timer_base + TIMER_CTL_REG(timer)); | |
| writel(val & ~TIMER_CTL_ENABLE, timer_base + TIMER_CTL_REG(timer)); | |
| sun5i_clkevt_sync(); | |
| } | |
| static void sun5i_clkevt_time_setup(u8 timer, u32 delay) | |
| { | |
| writel(delay, timer_base + TIMER_INTVAL_LO_REG(timer)); | |
| } | |
| static void sun5i_clkevt_time_start(u8 timer, bool periodic) | |
| { | |
| u32 val = readl(timer_base + TIMER_CTL_REG(timer)); | |
| if (periodic) | |
| val &= ~TIMER_CTL_ONESHOT; | |
| else | |
| val |= TIMER_CTL_ONESHOT; | |
| writel(val | TIMER_CTL_ENABLE | TIMER_CTL_RELOAD, | |
| timer_base + TIMER_CTL_REG(timer)); | |
| } | |
| static void sun5i_clkevt_mode(enum clock_event_mode mode, | |
| struct clock_event_device *clk) | |
| { | |
| switch (mode) { | |
| case CLOCK_EVT_MODE_PERIODIC: | |
| sun5i_clkevt_time_stop(0); | |
| sun5i_clkevt_time_setup(0, ticks_per_jiffy); | |
| sun5i_clkevt_time_start(0, true); | |
| break; | |
| case CLOCK_EVT_MODE_ONESHOT: | |
| sun5i_clkevt_time_stop(0); | |
| sun5i_clkevt_time_start(0, false); | |
| break; | |
| case CLOCK_EVT_MODE_UNUSED: | |
| case CLOCK_EVT_MODE_SHUTDOWN: | |
| default: | |
| sun5i_clkevt_time_stop(0); | |
| break; | |
| } | |
| } | |
| static int sun5i_clkevt_next_event(unsigned long evt, | |
| struct clock_event_device *unused) | |
| { | |
| sun5i_clkevt_time_stop(0); | |
| sun5i_clkevt_time_setup(0, evt - TIMER_SYNC_TICKS); | |
| sun5i_clkevt_time_start(0, false); | |
| return 0; | |
| } | |
| static struct clock_event_device sun5i_clockevent = { | |
| .name = "sun5i_tick", | |
| .rating = 340, | |
| .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT, | |
| .set_mode = sun5i_clkevt_mode, | |
| .set_next_event = sun5i_clkevt_next_event, | |
| }; | |
| static irqreturn_t sun5i_timer_interrupt(int irq, void *dev_id) | |
| { | |
| struct clock_event_device *evt = (struct clock_event_device *)dev_id; | |
| writel(0x1, timer_base + TIMER_IRQ_ST_REG); | |
| evt->event_handler(evt); | |
| return IRQ_HANDLED; | |
| } | |
| static struct irqaction sun5i_timer_irq = { | |
| .name = "sun5i_timer0", | |
| .flags = IRQF_TIMER | IRQF_IRQPOLL, | |
| .handler = sun5i_timer_interrupt, | |
| .dev_id = &sun5i_clockevent, | |
| }; | |
| static u64 sun5i_timer_sched_read(void) | |
| { | |
| return ~readl(timer_base + TIMER_CNTVAL_LO_REG(1)); | |
| } | |
| static void __init sun5i_timer_init(struct device_node *node) | |
| { | |
| struct reset_control *rstc; | |
| unsigned long rate; | |
| struct clk *clk; | |
| int ret, irq; | |
| u32 val; | |
| timer_base = of_iomap(node, 0); | |
| if (!timer_base) | |
| panic("Can't map registers"); | |
| irq = irq_of_parse_and_map(node, 0); | |
| if (irq <= 0) | |
| panic("Can't parse IRQ"); | |
| clk = of_clk_get(node, 0); | |
| if (IS_ERR(clk)) | |
| panic("Can't get timer clock"); | |
| clk_prepare_enable(clk); | |
| rate = clk_get_rate(clk); | |
| rstc = of_reset_control_get(node, NULL); | |
| if (!IS_ERR(rstc)) | |
| reset_control_deassert(rstc); | |
| writel(~0, timer_base + TIMER_INTVAL_LO_REG(1)); | |
| writel(TIMER_CTL_ENABLE | TIMER_CTL_RELOAD, | |
| timer_base + TIMER_CTL_REG(1)); | |
| sched_clock_register(sun5i_timer_sched_read, 32, rate); | |
| clocksource_mmio_init(timer_base + TIMER_CNTVAL_LO_REG(1), node->name, | |
| rate, 340, 32, clocksource_mmio_readl_down); | |
| ticks_per_jiffy = DIV_ROUND_UP(rate, HZ); | |
| ret = setup_irq(irq, &sun5i_timer_irq); | |
| if (ret) | |
| pr_warn("failed to setup irq %d\n", irq); | |
| /* Enable timer0 interrupt */ | |
| val = readl(timer_base + TIMER_IRQ_EN_REG); | |
| writel(val | TIMER_IRQ_EN(0), timer_base + TIMER_IRQ_EN_REG); | |
| sun5i_clockevent.cpumask = cpu_possible_mask; | |
| sun5i_clockevent.irq = irq; | |
| clockevents_config_and_register(&sun5i_clockevent, rate, | |
| TIMER_SYNC_TICKS, 0xffffffff); | |
| } | |
| CLOCKSOURCE_OF_DECLARE(sun5i_a13, "allwinner,sun5i-a13-hstimer", | |
| sun5i_timer_init); | |
| CLOCKSOURCE_OF_DECLARE(sun7i_a20, "allwinner,sun7i-a20-hstimer", | |
| sun5i_timer_init); |