| /* | |
| * | |
| * Generic Bluetooth USB driver | |
| * | |
| * Copyright (C) 2005-2008 Marcel Holtmann <marcel@holtmann.org> | |
| * | |
| * | |
| * This program is free software; you can redistribute it and/or modify | |
| * it under the terms of the GNU General Public License as published by | |
| * the Free Software Foundation; either version 2 of the License, or | |
| * (at your option) any later version. | |
| * | |
| * This program is distributed in the hope that it will be useful, | |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
| * GNU General Public License for more details. | |
| * | |
| * You should have received a copy of the GNU General Public License | |
| * along with this program; if not, write to the Free Software | |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA | |
| * | |
| */ | |
| #include <linux/kernel.h> | |
| #include <linux/module.h> | |
| #include <linux/init.h> | |
| #include <linux/slab.h> | |
| #include <linux/types.h> | |
| #include <linux/sched.h> | |
| #include <linux/errno.h> | |
| #include <linux/skbuff.h> | |
| #include <linux/usb.h> | |
| #include <net/bluetooth/bluetooth.h> | |
| #include <net/bluetooth/hci_core.h> | |
| #define VERSION "0.6" | |
| static int ignore_dga; | |
| static int ignore_csr; | |
| static int ignore_sniffer; | |
| static int disable_scofix; | |
| static int force_scofix; | |
| static int reset = 1; | |
| static struct usb_driver btusb_driver; | |
| #define BTUSB_IGNORE 0x01 | |
| #define BTUSB_DIGIANSWER 0x02 | |
| #define BTUSB_CSR 0x04 | |
| #define BTUSB_SNIFFER 0x08 | |
| #define BTUSB_BCM92035 0x10 | |
| #define BTUSB_BROKEN_ISOC 0x20 | |
| #define BTUSB_WRONG_SCO_MTU 0x40 | |
| static struct usb_device_id btusb_table[] = { | |
| /* Generic Bluetooth USB device */ | |
| { USB_DEVICE_INFO(0xe0, 0x01, 0x01) }, | |
| /* AVM BlueFRITZ! USB v2.0 */ | |
| { USB_DEVICE(0x057c, 0x3800) }, | |
| /* Bluetooth Ultraport Module from IBM */ | |
| { USB_DEVICE(0x04bf, 0x030a) }, | |
| /* ALPS Modules with non-standard id */ | |
| { USB_DEVICE(0x044e, 0x3001) }, | |
| { USB_DEVICE(0x044e, 0x3002) }, | |
| /* Ericsson with non-standard id */ | |
| { USB_DEVICE(0x0bdb, 0x1002) }, | |
| /* Canyon CN-BTU1 with HID interfaces */ | |
| { USB_DEVICE(0x0c10, 0x0000) }, | |
| { } /* Terminating entry */ | |
| }; | |
| MODULE_DEVICE_TABLE(usb, btusb_table); | |
| static struct usb_device_id blacklist_table[] = { | |
| /* CSR BlueCore devices */ | |
| { USB_DEVICE(0x0a12, 0x0001), .driver_info = BTUSB_CSR }, | |
| /* Broadcom BCM2033 without firmware */ | |
| { USB_DEVICE(0x0a5c, 0x2033), .driver_info = BTUSB_IGNORE }, | |
| /* Broadcom BCM2035 */ | |
| { USB_DEVICE(0x0a5c, 0x2035), .driver_info = BTUSB_WRONG_SCO_MTU }, | |
| { USB_DEVICE(0x0a5c, 0x200a), .driver_info = BTUSB_WRONG_SCO_MTU }, | |
| { USB_DEVICE(0x0a5c, 0x2009), .driver_info = BTUSB_BCM92035 }, | |
| /* Broadcom BCM2045 */ | |
| { USB_DEVICE(0x0a5c, 0x2039), .driver_info = BTUSB_WRONG_SCO_MTU }, | |
| { USB_DEVICE(0x0a5c, 0x2101), .driver_info = BTUSB_WRONG_SCO_MTU }, | |
| /* IBM/Lenovo ThinkPad with Broadcom chip */ | |
| { USB_DEVICE(0x0a5c, 0x201e), .driver_info = BTUSB_WRONG_SCO_MTU }, | |
| { USB_DEVICE(0x0a5c, 0x2110), .driver_info = BTUSB_WRONG_SCO_MTU }, | |
| /* HP laptop with Broadcom chip */ | |
| { USB_DEVICE(0x03f0, 0x171d), .driver_info = BTUSB_WRONG_SCO_MTU }, | |
| /* Dell laptop with Broadcom chip */ | |
| { USB_DEVICE(0x413c, 0x8126), .driver_info = BTUSB_WRONG_SCO_MTU }, | |
| /* Dell Wireless 370 and 410 devices */ | |
| { USB_DEVICE(0x413c, 0x8152), .driver_info = BTUSB_WRONG_SCO_MTU }, | |
| { USB_DEVICE(0x413c, 0x8156), .driver_info = BTUSB_WRONG_SCO_MTU }, | |
| /* Belkin F8T012 and F8T013 devices */ | |
| { USB_DEVICE(0x050d, 0x0012), .driver_info = BTUSB_WRONG_SCO_MTU }, | |
| { USB_DEVICE(0x050d, 0x0013), .driver_info = BTUSB_WRONG_SCO_MTU }, | |
| /* Asus WL-BTD202 device */ | |
| { USB_DEVICE(0x0b05, 0x1715), .driver_info = BTUSB_WRONG_SCO_MTU }, | |
| /* Kensington Bluetooth USB adapter */ | |
| { USB_DEVICE(0x047d, 0x105e), .driver_info = BTUSB_WRONG_SCO_MTU }, | |
| /* RTX Telecom based adapters with buggy SCO support */ | |
| { USB_DEVICE(0x0400, 0x0807), .driver_info = BTUSB_BROKEN_ISOC }, | |
| { USB_DEVICE(0x0400, 0x080a), .driver_info = BTUSB_BROKEN_ISOC }, | |
| /* CONWISE Technology based adapters with buggy SCO support */ | |
| { USB_DEVICE(0x0e5e, 0x6622), .driver_info = BTUSB_BROKEN_ISOC }, | |
| /* Digianswer devices */ | |
| { USB_DEVICE(0x08fd, 0x0001), .driver_info = BTUSB_DIGIANSWER }, | |
| { USB_DEVICE(0x08fd, 0x0002), .driver_info = BTUSB_IGNORE }, | |
| /* CSR BlueCore Bluetooth Sniffer */ | |
| { USB_DEVICE(0x0a12, 0x0002), .driver_info = BTUSB_SNIFFER }, | |
| /* Frontline ComProbe Bluetooth Sniffer */ | |
| { USB_DEVICE(0x16d3, 0x0002), .driver_info = BTUSB_SNIFFER }, | |
| { } /* Terminating entry */ | |
| }; | |
| #define BTUSB_MAX_ISOC_FRAMES 10 | |
| #define BTUSB_INTR_RUNNING 0 | |
| #define BTUSB_BULK_RUNNING 1 | |
| #define BTUSB_ISOC_RUNNING 2 | |
| #define BTUSB_SUSPENDING 3 | |
| struct btusb_data { | |
| struct hci_dev *hdev; | |
| struct usb_device *udev; | |
| struct usb_interface *intf; | |
| struct usb_interface *isoc; | |
| spinlock_t lock; | |
| unsigned long flags; | |
| struct work_struct work; | |
| struct work_struct waker; | |
| struct usb_anchor tx_anchor; | |
| struct usb_anchor intr_anchor; | |
| struct usb_anchor bulk_anchor; | |
| struct usb_anchor isoc_anchor; | |
| struct usb_anchor deferred; | |
| int tx_in_flight; | |
| spinlock_t txlock; | |
| struct usb_endpoint_descriptor *intr_ep; | |
| struct usb_endpoint_descriptor *bulk_tx_ep; | |
| struct usb_endpoint_descriptor *bulk_rx_ep; | |
| struct usb_endpoint_descriptor *isoc_tx_ep; | |
| struct usb_endpoint_descriptor *isoc_rx_ep; | |
| __u8 cmdreq_type; | |
| unsigned int sco_num; | |
| int isoc_altsetting; | |
| int suspend_count; | |
| int did_iso_resume:1; | |
| }; | |
| static int inc_tx(struct btusb_data *data) | |
| { | |
| unsigned long flags; | |
| int rv; | |
| spin_lock_irqsave(&data->txlock, flags); | |
| rv = test_bit(BTUSB_SUSPENDING, &data->flags); | |
| if (!rv) | |
| data->tx_in_flight++; | |
| spin_unlock_irqrestore(&data->txlock, flags); | |
| return rv; | |
| } | |
| static void btusb_intr_complete(struct urb *urb) | |
| { | |
| struct hci_dev *hdev = urb->context; | |
| struct btusb_data *data = hdev->driver_data; | |
| int err; | |
| BT_DBG("%s urb %p status %d count %d", hdev->name, | |
| urb, urb->status, urb->actual_length); | |
| if (!test_bit(HCI_RUNNING, &hdev->flags)) | |
| return; | |
| if (urb->status == 0) { | |
| hdev->stat.byte_rx += urb->actual_length; | |
| if (hci_recv_fragment(hdev, HCI_EVENT_PKT, | |
| urb->transfer_buffer, | |
| urb->actual_length) < 0) { | |
| BT_ERR("%s corrupted event packet", hdev->name); | |
| hdev->stat.err_rx++; | |
| } | |
| } | |
| if (!test_bit(BTUSB_INTR_RUNNING, &data->flags)) | |
| return; | |
| usb_mark_last_busy(data->udev); | |
| usb_anchor_urb(urb, &data->intr_anchor); | |
| err = usb_submit_urb(urb, GFP_ATOMIC); | |
| if (err < 0) { | |
| BT_ERR("%s urb %p failed to resubmit (%d)", | |
| hdev->name, urb, -err); | |
| usb_unanchor_urb(urb); | |
| } | |
| } | |
| static int btusb_submit_intr_urb(struct hci_dev *hdev, gfp_t mem_flags) | |
| { | |
| struct btusb_data *data = hdev->driver_data; | |
| struct urb *urb; | |
| unsigned char *buf; | |
| unsigned int pipe; | |
| int err, size; | |
| BT_DBG("%s", hdev->name); | |
| if (!data->intr_ep) | |
| return -ENODEV; | |
| urb = usb_alloc_urb(0, mem_flags); | |
| if (!urb) | |
| return -ENOMEM; | |
| size = le16_to_cpu(data->intr_ep->wMaxPacketSize); | |
| buf = kmalloc(size, mem_flags); | |
| if (!buf) { | |
| usb_free_urb(urb); | |
| return -ENOMEM; | |
| } | |
| pipe = usb_rcvintpipe(data->udev, data->intr_ep->bEndpointAddress); | |
| usb_fill_int_urb(urb, data->udev, pipe, buf, size, | |
| btusb_intr_complete, hdev, | |
| data->intr_ep->bInterval); | |
| urb->transfer_flags |= URB_FREE_BUFFER; | |
| usb_anchor_urb(urb, &data->intr_anchor); | |
| err = usb_submit_urb(urb, mem_flags); | |
| if (err < 0) { | |
| BT_ERR("%s urb %p submission failed (%d)", | |
| hdev->name, urb, -err); | |
| usb_unanchor_urb(urb); | |
| } | |
| usb_free_urb(urb); | |
| return err; | |
| } | |
| static void btusb_bulk_complete(struct urb *urb) | |
| { | |
| struct hci_dev *hdev = urb->context; | |
| struct btusb_data *data = hdev->driver_data; | |
| int err; | |
| BT_DBG("%s urb %p status %d count %d", hdev->name, | |
| urb, urb->status, urb->actual_length); | |
| if (!test_bit(HCI_RUNNING, &hdev->flags)) | |
| return; | |
| if (urb->status == 0) { | |
| hdev->stat.byte_rx += urb->actual_length; | |
| if (hci_recv_fragment(hdev, HCI_ACLDATA_PKT, | |
| urb->transfer_buffer, | |
| urb->actual_length) < 0) { | |
| BT_ERR("%s corrupted ACL packet", hdev->name); | |
| hdev->stat.err_rx++; | |
| } | |
| } | |
| if (!test_bit(BTUSB_BULK_RUNNING, &data->flags)) | |
| return; | |
| usb_anchor_urb(urb, &data->bulk_anchor); | |
| usb_mark_last_busy(data->udev); | |
| err = usb_submit_urb(urb, GFP_ATOMIC); | |
| if (err < 0) { | |
| BT_ERR("%s urb %p failed to resubmit (%d)", | |
| hdev->name, urb, -err); | |
| usb_unanchor_urb(urb); | |
| } | |
| } | |
| static int btusb_submit_bulk_urb(struct hci_dev *hdev, gfp_t mem_flags) | |
| { | |
| struct btusb_data *data = hdev->driver_data; | |
| struct urb *urb; | |
| unsigned char *buf; | |
| unsigned int pipe; | |
| int err, size = HCI_MAX_FRAME_SIZE; | |
| BT_DBG("%s", hdev->name); | |
| if (!data->bulk_rx_ep) | |
| return -ENODEV; | |
| urb = usb_alloc_urb(0, mem_flags); | |
| if (!urb) | |
| return -ENOMEM; | |
| buf = kmalloc(size, mem_flags); | |
| if (!buf) { | |
| usb_free_urb(urb); | |
| return -ENOMEM; | |
| } | |
| pipe = usb_rcvbulkpipe(data->udev, data->bulk_rx_ep->bEndpointAddress); | |
| usb_fill_bulk_urb(urb, data->udev, pipe, | |
| buf, size, btusb_bulk_complete, hdev); | |
| urb->transfer_flags |= URB_FREE_BUFFER; | |
| usb_mark_last_busy(data->udev); | |
| usb_anchor_urb(urb, &data->bulk_anchor); | |
| err = usb_submit_urb(urb, mem_flags); | |
| if (err < 0) { | |
| BT_ERR("%s urb %p submission failed (%d)", | |
| hdev->name, urb, -err); | |
| usb_unanchor_urb(urb); | |
| } | |
| usb_free_urb(urb); | |
| return err; | |
| } | |
| static void btusb_isoc_complete(struct urb *urb) | |
| { | |
| struct hci_dev *hdev = urb->context; | |
| struct btusb_data *data = hdev->driver_data; | |
| int i, err; | |
| BT_DBG("%s urb %p status %d count %d", hdev->name, | |
| urb, urb->status, urb->actual_length); | |
| if (!test_bit(HCI_RUNNING, &hdev->flags)) | |
| return; | |
| if (urb->status == 0) { | |
| for (i = 0; i < urb->number_of_packets; i++) { | |
| unsigned int offset = urb->iso_frame_desc[i].offset; | |
| unsigned int length = urb->iso_frame_desc[i].actual_length; | |
| if (urb->iso_frame_desc[i].status) | |
| continue; | |
| hdev->stat.byte_rx += length; | |
| if (hci_recv_fragment(hdev, HCI_SCODATA_PKT, | |
| urb->transfer_buffer + offset, | |
| length) < 0) { | |
| BT_ERR("%s corrupted SCO packet", hdev->name); | |
| hdev->stat.err_rx++; | |
| } | |
| } | |
| } | |
| if (!test_bit(BTUSB_ISOC_RUNNING, &data->flags)) | |
| return; | |
| usb_anchor_urb(urb, &data->isoc_anchor); | |
| err = usb_submit_urb(urb, GFP_ATOMIC); | |
| if (err < 0) { | |
| BT_ERR("%s urb %p failed to resubmit (%d)", | |
| hdev->name, urb, -err); | |
| usb_unanchor_urb(urb); | |
| } | |
| } | |
| static void inline __fill_isoc_descriptor(struct urb *urb, int len, int mtu) | |
| { | |
| int i, offset = 0; | |
| BT_DBG("len %d mtu %d", len, mtu); | |
| for (i = 0; i < BTUSB_MAX_ISOC_FRAMES && len >= mtu; | |
| i++, offset += mtu, len -= mtu) { | |
| urb->iso_frame_desc[i].offset = offset; | |
| urb->iso_frame_desc[i].length = mtu; | |
| } | |
| if (len && i < BTUSB_MAX_ISOC_FRAMES) { | |
| urb->iso_frame_desc[i].offset = offset; | |
| urb->iso_frame_desc[i].length = len; | |
| i++; | |
| } | |
| urb->number_of_packets = i; | |
| } | |
| static int btusb_submit_isoc_urb(struct hci_dev *hdev, gfp_t mem_flags) | |
| { | |
| struct btusb_data *data = hdev->driver_data; | |
| struct urb *urb; | |
| unsigned char *buf; | |
| unsigned int pipe; | |
| int err, size; | |
| BT_DBG("%s", hdev->name); | |
| if (!data->isoc_rx_ep) | |
| return -ENODEV; | |
| urb = usb_alloc_urb(BTUSB_MAX_ISOC_FRAMES, mem_flags); | |
| if (!urb) | |
| return -ENOMEM; | |
| size = le16_to_cpu(data->isoc_rx_ep->wMaxPacketSize) * | |
| BTUSB_MAX_ISOC_FRAMES; | |
| buf = kmalloc(size, mem_flags); | |
| if (!buf) { | |
| usb_free_urb(urb); | |
| return -ENOMEM; | |
| } | |
| pipe = usb_rcvisocpipe(data->udev, data->isoc_rx_ep->bEndpointAddress); | |
| urb->dev = data->udev; | |
| urb->pipe = pipe; | |
| urb->context = hdev; | |
| urb->complete = btusb_isoc_complete; | |
| urb->interval = data->isoc_rx_ep->bInterval; | |
| urb->transfer_flags = URB_FREE_BUFFER | URB_ISO_ASAP; | |
| urb->transfer_buffer = buf; | |
| urb->transfer_buffer_length = size; | |
| __fill_isoc_descriptor(urb, size, | |
| le16_to_cpu(data->isoc_rx_ep->wMaxPacketSize)); | |
| usb_anchor_urb(urb, &data->isoc_anchor); | |
| err = usb_submit_urb(urb, mem_flags); | |
| if (err < 0) { | |
| BT_ERR("%s urb %p submission failed (%d)", | |
| hdev->name, urb, -err); | |
| usb_unanchor_urb(urb); | |
| } | |
| usb_free_urb(urb); | |
| return err; | |
| } | |
| static void btusb_tx_complete(struct urb *urb) | |
| { | |
| struct sk_buff *skb = urb->context; | |
| struct hci_dev *hdev = (struct hci_dev *) skb->dev; | |
| struct btusb_data *data = hdev->driver_data; | |
| BT_DBG("%s urb %p status %d count %d", hdev->name, | |
| urb, urb->status, urb->actual_length); | |
| if (!test_bit(HCI_RUNNING, &hdev->flags)) | |
| goto done; | |
| if (!urb->status) | |
| hdev->stat.byte_tx += urb->transfer_buffer_length; | |
| else | |
| hdev->stat.err_tx++; | |
| done: | |
| spin_lock(&data->txlock); | |
| data->tx_in_flight--; | |
| spin_unlock(&data->txlock); | |
| kfree(urb->setup_packet); | |
| kfree_skb(skb); | |
| } | |
| static void btusb_isoc_tx_complete(struct urb *urb) | |
| { | |
| struct sk_buff *skb = urb->context; | |
| struct hci_dev *hdev = (struct hci_dev *) skb->dev; | |
| BT_DBG("%s urb %p status %d count %d", hdev->name, | |
| urb, urb->status, urb->actual_length); | |
| if (!test_bit(HCI_RUNNING, &hdev->flags)) | |
| goto done; | |
| if (!urb->status) | |
| hdev->stat.byte_tx += urb->transfer_buffer_length; | |
| else | |
| hdev->stat.err_tx++; | |
| done: | |
| kfree(urb->setup_packet); | |
| kfree_skb(skb); | |
| } | |
| static int btusb_open(struct hci_dev *hdev) | |
| { | |
| struct btusb_data *data = hdev->driver_data; | |
| int err; | |
| BT_DBG("%s", hdev->name); | |
| err = usb_autopm_get_interface(data->intf); | |
| if (err < 0) | |
| return err; | |
| data->intf->needs_remote_wakeup = 1; | |
| if (test_and_set_bit(HCI_RUNNING, &hdev->flags)) | |
| goto done; | |
| if (test_and_set_bit(BTUSB_INTR_RUNNING, &data->flags)) | |
| goto done; | |
| err = btusb_submit_intr_urb(hdev, GFP_KERNEL); | |
| if (err < 0) | |
| goto failed; | |
| err = btusb_submit_bulk_urb(hdev, GFP_KERNEL); | |
| if (err < 0) { | |
| usb_kill_anchored_urbs(&data->intr_anchor); | |
| goto failed; | |
| } | |
| set_bit(BTUSB_BULK_RUNNING, &data->flags); | |
| btusb_submit_bulk_urb(hdev, GFP_KERNEL); | |
| done: | |
| usb_autopm_put_interface(data->intf); | |
| return 0; | |
| failed: | |
| clear_bit(BTUSB_INTR_RUNNING, &data->flags); | |
| clear_bit(HCI_RUNNING, &hdev->flags); | |
| usb_autopm_put_interface(data->intf); | |
| return err; | |
| } | |
| static void btusb_stop_traffic(struct btusb_data *data) | |
| { | |
| usb_kill_anchored_urbs(&data->intr_anchor); | |
| usb_kill_anchored_urbs(&data->bulk_anchor); | |
| usb_kill_anchored_urbs(&data->isoc_anchor); | |
| } | |
| static int btusb_close(struct hci_dev *hdev) | |
| { | |
| struct btusb_data *data = hdev->driver_data; | |
| int err; | |
| BT_DBG("%s", hdev->name); | |
| if (!test_and_clear_bit(HCI_RUNNING, &hdev->flags)) | |
| return 0; | |
| cancel_work_sync(&data->work); | |
| cancel_work_sync(&data->waker); | |
| clear_bit(BTUSB_ISOC_RUNNING, &data->flags); | |
| clear_bit(BTUSB_BULK_RUNNING, &data->flags); | |
| clear_bit(BTUSB_INTR_RUNNING, &data->flags); | |
| btusb_stop_traffic(data); | |
| err = usb_autopm_get_interface(data->intf); | |
| if (err < 0) | |
| goto failed; | |
| data->intf->needs_remote_wakeup = 0; | |
| usb_autopm_put_interface(data->intf); | |
| failed: | |
| usb_scuttle_anchored_urbs(&data->deferred); | |
| return 0; | |
| } | |
| static int btusb_flush(struct hci_dev *hdev) | |
| { | |
| struct btusb_data *data = hdev->driver_data; | |
| BT_DBG("%s", hdev->name); | |
| usb_kill_anchored_urbs(&data->tx_anchor); | |
| return 0; | |
| } | |
| static int btusb_send_frame(struct sk_buff *skb) | |
| { | |
| struct hci_dev *hdev = (struct hci_dev *) skb->dev; | |
| struct btusb_data *data = hdev->driver_data; | |
| struct usb_ctrlrequest *dr; | |
| struct urb *urb; | |
| unsigned int pipe; | |
| int err; | |
| BT_DBG("%s", hdev->name); | |
| if (!test_bit(HCI_RUNNING, &hdev->flags)) | |
| return -EBUSY; | |
| switch (bt_cb(skb)->pkt_type) { | |
| case HCI_COMMAND_PKT: | |
| urb = usb_alloc_urb(0, GFP_ATOMIC); | |
| if (!urb) | |
| return -ENOMEM; | |
| dr = kmalloc(sizeof(*dr), GFP_ATOMIC); | |
| if (!dr) { | |
| usb_free_urb(urb); | |
| return -ENOMEM; | |
| } | |
| dr->bRequestType = data->cmdreq_type; | |
| dr->bRequest = 0; | |
| dr->wIndex = 0; | |
| dr->wValue = 0; | |
| dr->wLength = __cpu_to_le16(skb->len); | |
| pipe = usb_sndctrlpipe(data->udev, 0x00); | |
| usb_fill_control_urb(urb, data->udev, pipe, (void *) dr, | |
| skb->data, skb->len, btusb_tx_complete, skb); | |
| hdev->stat.cmd_tx++; | |
| break; | |
| case HCI_ACLDATA_PKT: | |
| if (!data->bulk_tx_ep || hdev->conn_hash.acl_num < 1) | |
| return -ENODEV; | |
| urb = usb_alloc_urb(0, GFP_ATOMIC); | |
| if (!urb) | |
| return -ENOMEM; | |
| pipe = usb_sndbulkpipe(data->udev, | |
| data->bulk_tx_ep->bEndpointAddress); | |
| usb_fill_bulk_urb(urb, data->udev, pipe, | |
| skb->data, skb->len, btusb_tx_complete, skb); | |
| hdev->stat.acl_tx++; | |
| break; | |
| case HCI_SCODATA_PKT: | |
| if (!data->isoc_tx_ep || hdev->conn_hash.sco_num < 1) | |
| return -ENODEV; | |
| urb = usb_alloc_urb(BTUSB_MAX_ISOC_FRAMES, GFP_ATOMIC); | |
| if (!urb) | |
| return -ENOMEM; | |
| pipe = usb_sndisocpipe(data->udev, | |
| data->isoc_tx_ep->bEndpointAddress); | |
| urb->dev = data->udev; | |
| urb->pipe = pipe; | |
| urb->context = skb; | |
| urb->complete = btusb_isoc_tx_complete; | |
| urb->interval = data->isoc_tx_ep->bInterval; | |
| urb->transfer_flags = URB_ISO_ASAP; | |
| urb->transfer_buffer = skb->data; | |
| urb->transfer_buffer_length = skb->len; | |
| __fill_isoc_descriptor(urb, skb->len, | |
| le16_to_cpu(data->isoc_tx_ep->wMaxPacketSize)); | |
| hdev->stat.sco_tx++; | |
| goto skip_waking; | |
| default: | |
| return -EILSEQ; | |
| } | |
| err = inc_tx(data); | |
| if (err) { | |
| usb_anchor_urb(urb, &data->deferred); | |
| schedule_work(&data->waker); | |
| err = 0; | |
| goto done; | |
| } | |
| skip_waking: | |
| usb_anchor_urb(urb, &data->tx_anchor); | |
| err = usb_submit_urb(urb, GFP_ATOMIC); | |
| if (err < 0) { | |
| BT_ERR("%s urb %p submission failed", hdev->name, urb); | |
| kfree(urb->setup_packet); | |
| usb_unanchor_urb(urb); | |
| } else { | |
| usb_mark_last_busy(data->udev); | |
| } | |
| usb_free_urb(urb); | |
| done: | |
| return err; | |
| } | |
| static void btusb_destruct(struct hci_dev *hdev) | |
| { | |
| struct btusb_data *data = hdev->driver_data; | |
| BT_DBG("%s", hdev->name); | |
| kfree(data); | |
| } | |
| static void btusb_notify(struct hci_dev *hdev, unsigned int evt) | |
| { | |
| struct btusb_data *data = hdev->driver_data; | |
| BT_DBG("%s evt %d", hdev->name, evt); | |
| if (hdev->conn_hash.sco_num != data->sco_num) { | |
| data->sco_num = hdev->conn_hash.sco_num; | |
| schedule_work(&data->work); | |
| } | |
| } | |
| static int inline __set_isoc_interface(struct hci_dev *hdev, int altsetting) | |
| { | |
| struct btusb_data *data = hdev->driver_data; | |
| struct usb_interface *intf = data->isoc; | |
| struct usb_endpoint_descriptor *ep_desc; | |
| int i, err; | |
| if (!data->isoc) | |
| return -ENODEV; | |
| err = usb_set_interface(data->udev, 1, altsetting); | |
| if (err < 0) { | |
| BT_ERR("%s setting interface failed (%d)", hdev->name, -err); | |
| return err; | |
| } | |
| data->isoc_altsetting = altsetting; | |
| data->isoc_tx_ep = NULL; | |
| data->isoc_rx_ep = NULL; | |
| for (i = 0; i < intf->cur_altsetting->desc.bNumEndpoints; i++) { | |
| ep_desc = &intf->cur_altsetting->endpoint[i].desc; | |
| if (!data->isoc_tx_ep && usb_endpoint_is_isoc_out(ep_desc)) { | |
| data->isoc_tx_ep = ep_desc; | |
| continue; | |
| } | |
| if (!data->isoc_rx_ep && usb_endpoint_is_isoc_in(ep_desc)) { | |
| data->isoc_rx_ep = ep_desc; | |
| continue; | |
| } | |
| } | |
| if (!data->isoc_tx_ep || !data->isoc_rx_ep) { | |
| BT_ERR("%s invalid SCO descriptors", hdev->name); | |
| return -ENODEV; | |
| } | |
| return 0; | |
| } | |
| static void btusb_work(struct work_struct *work) | |
| { | |
| struct btusb_data *data = container_of(work, struct btusb_data, work); | |
| struct hci_dev *hdev = data->hdev; | |
| int err; | |
| if (hdev->conn_hash.sco_num > 0) { | |
| if (!data->did_iso_resume) { | |
| err = usb_autopm_get_interface(data->isoc); | |
| if (err < 0) { | |
| clear_bit(BTUSB_ISOC_RUNNING, &data->flags); | |
| usb_kill_anchored_urbs(&data->isoc_anchor); | |
| return; | |
| } | |
| data->did_iso_resume = 1; | |
| } | |
| if (data->isoc_altsetting != 2) { | |
| clear_bit(BTUSB_ISOC_RUNNING, &data->flags); | |
| usb_kill_anchored_urbs(&data->isoc_anchor); | |
| if (__set_isoc_interface(hdev, 2) < 0) | |
| return; | |
| } | |
| if (!test_and_set_bit(BTUSB_ISOC_RUNNING, &data->flags)) { | |
| if (btusb_submit_isoc_urb(hdev, GFP_KERNEL) < 0) | |
| clear_bit(BTUSB_ISOC_RUNNING, &data->flags); | |
| else | |
| btusb_submit_isoc_urb(hdev, GFP_KERNEL); | |
| } | |
| } else { | |
| clear_bit(BTUSB_ISOC_RUNNING, &data->flags); | |
| usb_kill_anchored_urbs(&data->isoc_anchor); | |
| __set_isoc_interface(hdev, 0); | |
| if (data->did_iso_resume) { | |
| data->did_iso_resume = 0; | |
| usb_autopm_put_interface(data->isoc); | |
| } | |
| } | |
| } | |
| static void btusb_waker(struct work_struct *work) | |
| { | |
| struct btusb_data *data = container_of(work, struct btusb_data, waker); | |
| int err; | |
| err = usb_autopm_get_interface(data->intf); | |
| if (err < 0) | |
| return; | |
| usb_autopm_put_interface(data->intf); | |
| } | |
| static int btusb_probe(struct usb_interface *intf, | |
| const struct usb_device_id *id) | |
| { | |
| struct usb_endpoint_descriptor *ep_desc; | |
| struct btusb_data *data; | |
| struct hci_dev *hdev; | |
| int i, err; | |
| BT_DBG("intf %p id %p", intf, id); | |
| /* interface numbers are hardcoded in the spec */ | |
| if (intf->cur_altsetting->desc.bInterfaceNumber != 0) | |
| return -ENODEV; | |
| if (!id->driver_info) { | |
| const struct usb_device_id *match; | |
| match = usb_match_id(intf, blacklist_table); | |
| if (match) | |
| id = match; | |
| } | |
| if (id->driver_info == BTUSB_IGNORE) | |
| return -ENODEV; | |
| if (ignore_dga && id->driver_info & BTUSB_DIGIANSWER) | |
| return -ENODEV; | |
| if (ignore_csr && id->driver_info & BTUSB_CSR) | |
| return -ENODEV; | |
| if (ignore_sniffer && id->driver_info & BTUSB_SNIFFER) | |
| return -ENODEV; | |
| data = kzalloc(sizeof(*data), GFP_KERNEL); | |
| if (!data) | |
| return -ENOMEM; | |
| for (i = 0; i < intf->cur_altsetting->desc.bNumEndpoints; i++) { | |
| ep_desc = &intf->cur_altsetting->endpoint[i].desc; | |
| if (!data->intr_ep && usb_endpoint_is_int_in(ep_desc)) { | |
| data->intr_ep = ep_desc; | |
| continue; | |
| } | |
| if (!data->bulk_tx_ep && usb_endpoint_is_bulk_out(ep_desc)) { | |
| data->bulk_tx_ep = ep_desc; | |
| continue; | |
| } | |
| if (!data->bulk_rx_ep && usb_endpoint_is_bulk_in(ep_desc)) { | |
| data->bulk_rx_ep = ep_desc; | |
| continue; | |
| } | |
| } | |
| if (!data->intr_ep || !data->bulk_tx_ep || !data->bulk_rx_ep) { | |
| kfree(data); | |
| return -ENODEV; | |
| } | |
| data->cmdreq_type = USB_TYPE_CLASS; | |
| data->udev = interface_to_usbdev(intf); | |
| data->intf = intf; | |
| spin_lock_init(&data->lock); | |
| INIT_WORK(&data->work, btusb_work); | |
| INIT_WORK(&data->waker, btusb_waker); | |
| spin_lock_init(&data->txlock); | |
| init_usb_anchor(&data->tx_anchor); | |
| init_usb_anchor(&data->intr_anchor); | |
| init_usb_anchor(&data->bulk_anchor); | |
| init_usb_anchor(&data->isoc_anchor); | |
| init_usb_anchor(&data->deferred); | |
| hdev = hci_alloc_dev(); | |
| if (!hdev) { | |
| kfree(data); | |
| return -ENOMEM; | |
| } | |
| hdev->bus = HCI_USB; | |
| hdev->driver_data = data; | |
| data->hdev = hdev; | |
| SET_HCIDEV_DEV(hdev, &intf->dev); | |
| hdev->open = btusb_open; | |
| hdev->close = btusb_close; | |
| hdev->flush = btusb_flush; | |
| hdev->send = btusb_send_frame; | |
| hdev->destruct = btusb_destruct; | |
| hdev->notify = btusb_notify; | |
| hdev->owner = THIS_MODULE; | |
| /* Interface numbers are hardcoded in the specification */ | |
| data->isoc = usb_ifnum_to_if(data->udev, 1); | |
| if (!reset) | |
| set_bit(HCI_QUIRK_NO_RESET, &hdev->quirks); | |
| if (force_scofix || id->driver_info & BTUSB_WRONG_SCO_MTU) { | |
| if (!disable_scofix) | |
| set_bit(HCI_QUIRK_FIXUP_BUFFER_SIZE, &hdev->quirks); | |
| } | |
| if (id->driver_info & BTUSB_BROKEN_ISOC) | |
| data->isoc = NULL; | |
| if (id->driver_info & BTUSB_DIGIANSWER) { | |
| data->cmdreq_type = USB_TYPE_VENDOR; | |
| set_bit(HCI_QUIRK_NO_RESET, &hdev->quirks); | |
| } | |
| if (id->driver_info & BTUSB_CSR) { | |
| struct usb_device *udev = data->udev; | |
| /* Old firmware would otherwise execute USB reset */ | |
| if (le16_to_cpu(udev->descriptor.bcdDevice) < 0x117) | |
| set_bit(HCI_QUIRK_NO_RESET, &hdev->quirks); | |
| } | |
| if (id->driver_info & BTUSB_SNIFFER) { | |
| struct usb_device *udev = data->udev; | |
| /* New sniffer firmware has crippled HCI interface */ | |
| if (le16_to_cpu(udev->descriptor.bcdDevice) > 0x997) | |
| set_bit(HCI_QUIRK_RAW_DEVICE, &hdev->quirks); | |
| data->isoc = NULL; | |
| } | |
| if (id->driver_info & BTUSB_BCM92035) { | |
| unsigned char cmd[] = { 0x3b, 0xfc, 0x01, 0x00 }; | |
| struct sk_buff *skb; | |
| skb = bt_skb_alloc(sizeof(cmd), GFP_KERNEL); | |
| if (skb) { | |
| memcpy(skb_put(skb, sizeof(cmd)), cmd, sizeof(cmd)); | |
| skb_queue_tail(&hdev->driver_init, skb); | |
| } | |
| } | |
| if (data->isoc) { | |
| err = usb_driver_claim_interface(&btusb_driver, | |
| data->isoc, data); | |
| if (err < 0) { | |
| hci_free_dev(hdev); | |
| kfree(data); | |
| return err; | |
| } | |
| } | |
| err = hci_register_dev(hdev); | |
| if (err < 0) { | |
| hci_free_dev(hdev); | |
| kfree(data); | |
| return err; | |
| } | |
| usb_set_intfdata(intf, data); | |
| return 0; | |
| } | |
| static void btusb_disconnect(struct usb_interface *intf) | |
| { | |
| struct btusb_data *data = usb_get_intfdata(intf); | |
| struct hci_dev *hdev; | |
| BT_DBG("intf %p", intf); | |
| if (!data) | |
| return; | |
| hdev = data->hdev; | |
| __hci_dev_hold(hdev); | |
| usb_set_intfdata(data->intf, NULL); | |
| if (data->isoc) | |
| usb_set_intfdata(data->isoc, NULL); | |
| hci_unregister_dev(hdev); | |
| if (intf == data->isoc) | |
| usb_driver_release_interface(&btusb_driver, data->intf); | |
| else if (data->isoc) | |
| usb_driver_release_interface(&btusb_driver, data->isoc); | |
| __hci_dev_put(hdev); | |
| hci_free_dev(hdev); | |
| } | |
| #ifdef CONFIG_PM | |
| static int btusb_suspend(struct usb_interface *intf, pm_message_t message) | |
| { | |
| struct btusb_data *data = usb_get_intfdata(intf); | |
| BT_DBG("intf %p", intf); | |
| if (data->suspend_count++) | |
| return 0; | |
| spin_lock_irq(&data->txlock); | |
| if (!((message.event & PM_EVENT_AUTO) && data->tx_in_flight)) { | |
| set_bit(BTUSB_SUSPENDING, &data->flags); | |
| spin_unlock_irq(&data->txlock); | |
| } else { | |
| spin_unlock_irq(&data->txlock); | |
| data->suspend_count--; | |
| return -EBUSY; | |
| } | |
| cancel_work_sync(&data->work); | |
| btusb_stop_traffic(data); | |
| usb_kill_anchored_urbs(&data->tx_anchor); | |
| return 0; | |
| } | |
| static void play_deferred(struct btusb_data *data) | |
| { | |
| struct urb *urb; | |
| int err; | |
| while ((urb = usb_get_from_anchor(&data->deferred))) { | |
| err = usb_submit_urb(urb, GFP_ATOMIC); | |
| if (err < 0) | |
| break; | |
| data->tx_in_flight++; | |
| } | |
| usb_scuttle_anchored_urbs(&data->deferred); | |
| } | |
| static int btusb_resume(struct usb_interface *intf) | |
| { | |
| struct btusb_data *data = usb_get_intfdata(intf); | |
| struct hci_dev *hdev = data->hdev; | |
| int err = 0; | |
| BT_DBG("intf %p", intf); | |
| if (--data->suspend_count) | |
| return 0; | |
| if (!test_bit(HCI_RUNNING, &hdev->flags)) | |
| goto done; | |
| if (test_bit(BTUSB_INTR_RUNNING, &data->flags)) { | |
| err = btusb_submit_intr_urb(hdev, GFP_NOIO); | |
| if (err < 0) { | |
| clear_bit(BTUSB_INTR_RUNNING, &data->flags); | |
| goto failed; | |
| } | |
| } | |
| if (test_bit(BTUSB_BULK_RUNNING, &data->flags)) { | |
| err = btusb_submit_bulk_urb(hdev, GFP_NOIO); | |
| if (err < 0) { | |
| clear_bit(BTUSB_BULK_RUNNING, &data->flags); | |
| goto failed; | |
| } | |
| btusb_submit_bulk_urb(hdev, GFP_NOIO); | |
| } | |
| if (test_bit(BTUSB_ISOC_RUNNING, &data->flags)) { | |
| if (btusb_submit_isoc_urb(hdev, GFP_NOIO) < 0) | |
| clear_bit(BTUSB_ISOC_RUNNING, &data->flags); | |
| else | |
| btusb_submit_isoc_urb(hdev, GFP_NOIO); | |
| } | |
| spin_lock_irq(&data->txlock); | |
| play_deferred(data); | |
| clear_bit(BTUSB_SUSPENDING, &data->flags); | |
| spin_unlock_irq(&data->txlock); | |
| schedule_work(&data->work); | |
| return 0; | |
| failed: | |
| usb_scuttle_anchored_urbs(&data->deferred); | |
| done: | |
| spin_lock_irq(&data->txlock); | |
| clear_bit(BTUSB_SUSPENDING, &data->flags); | |
| spin_unlock_irq(&data->txlock); | |
| return err; | |
| } | |
| #endif | |
| static struct usb_driver btusb_driver = { | |
| .name = "btusb", | |
| .probe = btusb_probe, | |
| .disconnect = btusb_disconnect, | |
| #ifdef CONFIG_PM | |
| .suspend = btusb_suspend, | |
| .resume = btusb_resume, | |
| #endif | |
| .id_table = btusb_table, | |
| .supports_autosuspend = 1, | |
| }; | |
| static int __init btusb_init(void) | |
| { | |
| BT_INFO("Generic Bluetooth USB driver ver %s", VERSION); | |
| return usb_register(&btusb_driver); | |
| } | |
| static void __exit btusb_exit(void) | |
| { | |
| usb_deregister(&btusb_driver); | |
| } | |
| module_init(btusb_init); | |
| module_exit(btusb_exit); | |
| module_param(ignore_dga, bool, 0644); | |
| MODULE_PARM_DESC(ignore_dga, "Ignore devices with id 08fd:0001"); | |
| module_param(ignore_csr, bool, 0644); | |
| MODULE_PARM_DESC(ignore_csr, "Ignore devices with id 0a12:0001"); | |
| module_param(ignore_sniffer, bool, 0644); | |
| MODULE_PARM_DESC(ignore_sniffer, "Ignore devices with id 0a12:0002"); | |
| module_param(disable_scofix, bool, 0644); | |
| MODULE_PARM_DESC(disable_scofix, "Disable fixup of wrong SCO buffer size"); | |
| module_param(force_scofix, bool, 0644); | |
| MODULE_PARM_DESC(force_scofix, "Force fixup of wrong SCO buffers size"); | |
| module_param(reset, bool, 0644); | |
| MODULE_PARM_DESC(reset, "Send HCI reset command on initialization"); | |
| MODULE_AUTHOR("Marcel Holtmann <marcel@holtmann.org>"); | |
| MODULE_DESCRIPTION("Generic Bluetooth USB driver ver " VERSION); | |
| MODULE_VERSION(VERSION); | |
| MODULE_LICENSE("GPL"); |