| /* | |
| * kernel/locking/mutex.c | |
| * | |
| * Mutexes: blocking mutual exclusion locks | |
| * | |
| * Started by Ingo Molnar: | |
| * | |
| * Copyright (C) 2004, 2005, 2006 Red Hat, Inc., Ingo Molnar <mingo@redhat.com> | |
| * | |
| * Many thanks to Arjan van de Ven, Thomas Gleixner, Steven Rostedt and | |
| * David Howells for suggestions and improvements. | |
| * | |
| * - Adaptive spinning for mutexes by Peter Zijlstra. (Ported to mainline | |
| * from the -rt tree, where it was originally implemented for rtmutexes | |
| * by Steven Rostedt, based on work by Gregory Haskins, Peter Morreale | |
| * and Sven Dietrich. | |
| * | |
| * Also see Documentation/locking/mutex-design.txt. | |
| */ | |
| #include <linux/mutex.h> | |
| #include <linux/ww_mutex.h> | |
| #include <linux/sched.h> | |
| #include <linux/sched/rt.h> | |
| #include <linux/export.h> | |
| #include <linux/spinlock.h> | |
| #include <linux/interrupt.h> | |
| #include <linux/debug_locks.h> | |
| #include <linux/osq_lock.h> | |
| #ifdef CONFIG_DEBUG_MUTEXES | |
| # include "mutex-debug.h" | |
| #else | |
| # include "mutex.h" | |
| #endif | |
| void | |
| __mutex_init(struct mutex *lock, const char *name, struct lock_class_key *key) | |
| { | |
| atomic_long_set(&lock->owner, 0); | |
| spin_lock_init(&lock->wait_lock); | |
| INIT_LIST_HEAD(&lock->wait_list); | |
| #ifdef CONFIG_MUTEX_SPIN_ON_OWNER | |
| osq_lock_init(&lock->osq); | |
| #endif | |
| debug_mutex_init(lock, name, key); | |
| } | |
| EXPORT_SYMBOL(__mutex_init); | |
| /* | |
| * @owner: contains: 'struct task_struct *' to the current lock owner, | |
| * NULL means not owned. Since task_struct pointers are aligned at | |
| * ARCH_MIN_TASKALIGN (which is at least sizeof(void *)), we have low | |
| * bits to store extra state. | |
| * | |
| * Bit0 indicates a non-empty waiter list; unlock must issue a wakeup. | |
| * Bit1 indicates unlock needs to hand the lock to the top-waiter | |
| */ | |
| #define MUTEX_FLAG_WAITERS 0x01 | |
| #define MUTEX_FLAG_HANDOFF 0x02 | |
| #define MUTEX_FLAGS 0x03 | |
| static inline struct task_struct *__owner_task(unsigned long owner) | |
| { | |
| return (struct task_struct *)(owner & ~MUTEX_FLAGS); | |
| } | |
| static inline unsigned long __owner_flags(unsigned long owner) | |
| { | |
| return owner & MUTEX_FLAGS; | |
| } | |
| /* | |
| * Actual trylock that will work on any unlocked state. | |
| * | |
| * When setting the owner field, we must preserve the low flag bits. | |
| * | |
| * Be careful with @handoff, only set that in a wait-loop (where you set | |
| * HANDOFF) to avoid recursive lock attempts. | |
| */ | |
| static inline bool __mutex_trylock(struct mutex *lock, const bool handoff) | |
| { | |
| unsigned long owner, curr = (unsigned long)current; | |
| owner = atomic_long_read(&lock->owner); | |
| for (;;) { /* must loop, can race against a flag */ | |
| unsigned long old, flags = __owner_flags(owner); | |
| if (__owner_task(owner)) { | |
| if (handoff && unlikely(__owner_task(owner) == current)) { | |
| /* | |
| * Provide ACQUIRE semantics for the lock-handoff. | |
| * | |
| * We cannot easily use load-acquire here, since | |
| * the actual load is a failed cmpxchg, which | |
| * doesn't imply any barriers. | |
| * | |
| * Also, this is a fairly unlikely scenario, and | |
| * this contains the cost. | |
| */ | |
| smp_mb(); /* ACQUIRE */ | |
| return true; | |
| } | |
| return false; | |
| } | |
| /* | |
| * We set the HANDOFF bit, we must make sure it doesn't live | |
| * past the point where we acquire it. This would be possible | |
| * if we (accidentally) set the bit on an unlocked mutex. | |
| */ | |
| if (handoff) | |
| flags &= ~MUTEX_FLAG_HANDOFF; | |
| old = atomic_long_cmpxchg_acquire(&lock->owner, owner, curr | flags); | |
| if (old == owner) | |
| return true; | |
| owner = old; | |
| } | |
| } | |
| #ifndef CONFIG_DEBUG_LOCK_ALLOC | |
| /* | |
| * Lockdep annotations are contained to the slow paths for simplicity. | |
| * There is nothing that would stop spreading the lockdep annotations outwards | |
| * except more code. | |
| */ | |
| /* | |
| * Optimistic trylock that only works in the uncontended case. Make sure to | |
| * follow with a __mutex_trylock() before failing. | |
| */ | |
| static __always_inline bool __mutex_trylock_fast(struct mutex *lock) | |
| { | |
| unsigned long curr = (unsigned long)current; | |
| if (!atomic_long_cmpxchg_acquire(&lock->owner, 0UL, curr)) | |
| return true; | |
| return false; | |
| } | |
| static __always_inline bool __mutex_unlock_fast(struct mutex *lock) | |
| { | |
| unsigned long curr = (unsigned long)current; | |
| if (atomic_long_cmpxchg_release(&lock->owner, curr, 0UL) == curr) | |
| return true; | |
| return false; | |
| } | |
| #endif | |
| static inline void __mutex_set_flag(struct mutex *lock, unsigned long flag) | |
| { | |
| atomic_long_or(flag, &lock->owner); | |
| } | |
| static inline void __mutex_clear_flag(struct mutex *lock, unsigned long flag) | |
| { | |
| atomic_long_andnot(flag, &lock->owner); | |
| } | |
| static inline bool __mutex_waiter_is_first(struct mutex *lock, struct mutex_waiter *waiter) | |
| { | |
| return list_first_entry(&lock->wait_list, struct mutex_waiter, list) == waiter; | |
| } | |
| /* | |
| * Give up ownership to a specific task, when @task = NULL, this is equivalent | |
| * to a regular unlock. Clears HANDOFF, preserves WAITERS. Provides RELEASE | |
| * semantics like a regular unlock, the __mutex_trylock() provides matching | |
| * ACQUIRE semantics for the handoff. | |
| */ | |
| static void __mutex_handoff(struct mutex *lock, struct task_struct *task) | |
| { | |
| unsigned long owner = atomic_long_read(&lock->owner); | |
| for (;;) { | |
| unsigned long old, new; | |
| #ifdef CONFIG_DEBUG_MUTEXES | |
| DEBUG_LOCKS_WARN_ON(__owner_task(owner) != current); | |
| #endif | |
| new = (owner & MUTEX_FLAG_WAITERS); | |
| new |= (unsigned long)task; | |
| old = atomic_long_cmpxchg_release(&lock->owner, owner, new); | |
| if (old == owner) | |
| break; | |
| owner = old; | |
| } | |
| } | |
| #ifndef CONFIG_DEBUG_LOCK_ALLOC | |
| /* | |
| * We split the mutex lock/unlock logic into separate fastpath and | |
| * slowpath functions, to reduce the register pressure on the fastpath. | |
| * We also put the fastpath first in the kernel image, to make sure the | |
| * branch is predicted by the CPU as default-untaken. | |
| */ | |
| static void __sched __mutex_lock_slowpath(struct mutex *lock); | |
| /** | |
| * mutex_lock - acquire the mutex | |
| * @lock: the mutex to be acquired | |
| * | |
| * Lock the mutex exclusively for this task. If the mutex is not | |
| * available right now, it will sleep until it can get it. | |
| * | |
| * The mutex must later on be released by the same task that | |
| * acquired it. Recursive locking is not allowed. The task | |
| * may not exit without first unlocking the mutex. Also, kernel | |
| * memory where the mutex resides must not be freed with | |
| * the mutex still locked. The mutex must first be initialized | |
| * (or statically defined) before it can be locked. memset()-ing | |
| * the mutex to 0 is not allowed. | |
| * | |
| * ( The CONFIG_DEBUG_MUTEXES .config option turns on debugging | |
| * checks that will enforce the restrictions and will also do | |
| * deadlock debugging. ) | |
| * | |
| * This function is similar to (but not equivalent to) down(). | |
| */ | |
| void __sched mutex_lock(struct mutex *lock) | |
| { | |
| might_sleep(); | |
| if (!__mutex_trylock_fast(lock)) | |
| __mutex_lock_slowpath(lock); | |
| } | |
| EXPORT_SYMBOL(mutex_lock); | |
| #endif | |
| static __always_inline void ww_mutex_lock_acquired(struct ww_mutex *ww, | |
| struct ww_acquire_ctx *ww_ctx) | |
| { | |
| #ifdef CONFIG_DEBUG_MUTEXES | |
| /* | |
| * If this WARN_ON triggers, you used ww_mutex_lock to acquire, | |
| * but released with a normal mutex_unlock in this call. | |
| * | |
| * This should never happen, always use ww_mutex_unlock. | |
| */ | |
| DEBUG_LOCKS_WARN_ON(ww->ctx); | |
| /* | |
| * Not quite done after calling ww_acquire_done() ? | |
| */ | |
| DEBUG_LOCKS_WARN_ON(ww_ctx->done_acquire); | |
| if (ww_ctx->contending_lock) { | |
| /* | |
| * After -EDEADLK you tried to | |
| * acquire a different ww_mutex? Bad! | |
| */ | |
| DEBUG_LOCKS_WARN_ON(ww_ctx->contending_lock != ww); | |
| /* | |
| * You called ww_mutex_lock after receiving -EDEADLK, | |
| * but 'forgot' to unlock everything else first? | |
| */ | |
| DEBUG_LOCKS_WARN_ON(ww_ctx->acquired > 0); | |
| ww_ctx->contending_lock = NULL; | |
| } | |
| /* | |
| * Naughty, using a different class will lead to undefined behavior! | |
| */ | |
| DEBUG_LOCKS_WARN_ON(ww_ctx->ww_class != ww->ww_class); | |
| #endif | |
| ww_ctx->acquired++; | |
| } | |
| /* | |
| * After acquiring lock with fastpath or when we lost out in contested | |
| * slowpath, set ctx and wake up any waiters so they can recheck. | |
| */ | |
| static __always_inline void | |
| ww_mutex_set_context_fastpath(struct ww_mutex *lock, | |
| struct ww_acquire_ctx *ctx) | |
| { | |
| unsigned long flags; | |
| struct mutex_waiter *cur; | |
| ww_mutex_lock_acquired(lock, ctx); | |
| lock->ctx = ctx; | |
| /* | |
| * The lock->ctx update should be visible on all cores before | |
| * the atomic read is done, otherwise contended waiters might be | |
| * missed. The contended waiters will either see ww_ctx == NULL | |
| * and keep spinning, or it will acquire wait_lock, add itself | |
| * to waiter list and sleep. | |
| */ | |
| smp_mb(); /* ^^^ */ | |
| /* | |
| * Check if lock is contended, if not there is nobody to wake up | |
| */ | |
| if (likely(!(atomic_long_read(&lock->base.owner) & MUTEX_FLAG_WAITERS))) | |
| return; | |
| /* | |
| * Uh oh, we raced in fastpath, wake up everyone in this case, | |
| * so they can see the new lock->ctx. | |
| */ | |
| spin_lock_mutex(&lock->base.wait_lock, flags); | |
| list_for_each_entry(cur, &lock->base.wait_list, list) { | |
| debug_mutex_wake_waiter(&lock->base, cur); | |
| wake_up_process(cur->task); | |
| } | |
| spin_unlock_mutex(&lock->base.wait_lock, flags); | |
| } | |
| /* | |
| * After acquiring lock in the slowpath set ctx and wake up any | |
| * waiters so they can recheck. | |
| * | |
| * Callers must hold the mutex wait_lock. | |
| */ | |
| static __always_inline void | |
| ww_mutex_set_context_slowpath(struct ww_mutex *lock, | |
| struct ww_acquire_ctx *ctx) | |
| { | |
| struct mutex_waiter *cur; | |
| ww_mutex_lock_acquired(lock, ctx); | |
| lock->ctx = ctx; | |
| /* | |
| * Give any possible sleeping processes the chance to wake up, | |
| * so they can recheck if they have to back off. | |
| */ | |
| list_for_each_entry(cur, &lock->base.wait_list, list) { | |
| debug_mutex_wake_waiter(&lock->base, cur); | |
| wake_up_process(cur->task); | |
| } | |
| } | |
| #ifdef CONFIG_MUTEX_SPIN_ON_OWNER | |
| /* | |
| * Look out! "owner" is an entirely speculative pointer | |
| * access and not reliable. | |
| */ | |
| static noinline | |
| bool mutex_spin_on_owner(struct mutex *lock, struct task_struct *owner) | |
| { | |
| bool ret = true; | |
| rcu_read_lock(); | |
| while (__mutex_owner(lock) == owner) { | |
| /* | |
| * Ensure we emit the owner->on_cpu, dereference _after_ | |
| * checking lock->owner still matches owner. If that fails, | |
| * owner might point to freed memory. If it still matches, | |
| * the rcu_read_lock() ensures the memory stays valid. | |
| */ | |
| barrier(); | |
| /* | |
| * Use vcpu_is_preempted to detect lock holder preemption issue. | |
| */ | |
| if (!owner->on_cpu || need_resched() || | |
| vcpu_is_preempted(task_cpu(owner))) { | |
| ret = false; | |
| break; | |
| } | |
| cpu_relax(); | |
| } | |
| rcu_read_unlock(); | |
| return ret; | |
| } | |
| /* | |
| * Initial check for entering the mutex spinning loop | |
| */ | |
| static inline int mutex_can_spin_on_owner(struct mutex *lock) | |
| { | |
| struct task_struct *owner; | |
| int retval = 1; | |
| if (need_resched()) | |
| return 0; | |
| rcu_read_lock(); | |
| owner = __mutex_owner(lock); | |
| /* | |
| * As lock holder preemption issue, we both skip spinning if task is not | |
| * on cpu or its cpu is preempted | |
| */ | |
| if (owner) | |
| retval = owner->on_cpu && !vcpu_is_preempted(task_cpu(owner)); | |
| rcu_read_unlock(); | |
| /* | |
| * If lock->owner is not set, the mutex has been released. Return true | |
| * such that we'll trylock in the spin path, which is a faster option | |
| * than the blocking slow path. | |
| */ | |
| return retval; | |
| } | |
| /* | |
| * Optimistic spinning. | |
| * | |
| * We try to spin for acquisition when we find that the lock owner | |
| * is currently running on a (different) CPU and while we don't | |
| * need to reschedule. The rationale is that if the lock owner is | |
| * running, it is likely to release the lock soon. | |
| * | |
| * The mutex spinners are queued up using MCS lock so that only one | |
| * spinner can compete for the mutex. However, if mutex spinning isn't | |
| * going to happen, there is no point in going through the lock/unlock | |
| * overhead. | |
| * | |
| * Returns true when the lock was taken, otherwise false, indicating | |
| * that we need to jump to the slowpath and sleep. | |
| * | |
| * The waiter flag is set to true if the spinner is a waiter in the wait | |
| * queue. The waiter-spinner will spin on the lock directly and concurrently | |
| * with the spinner at the head of the OSQ, if present, until the owner is | |
| * changed to itself. | |
| */ | |
| static bool mutex_optimistic_spin(struct mutex *lock, | |
| struct ww_acquire_ctx *ww_ctx, | |
| const bool use_ww_ctx, const bool waiter) | |
| { | |
| struct task_struct *task = current; | |
| if (!waiter) { | |
| /* | |
| * The purpose of the mutex_can_spin_on_owner() function is | |
| * to eliminate the overhead of osq_lock() and osq_unlock() | |
| * in case spinning isn't possible. As a waiter-spinner | |
| * is not going to take OSQ lock anyway, there is no need | |
| * to call mutex_can_spin_on_owner(). | |
| */ | |
| if (!mutex_can_spin_on_owner(lock)) | |
| goto fail; | |
| /* | |
| * In order to avoid a stampede of mutex spinners trying to | |
| * acquire the mutex all at once, the spinners need to take a | |
| * MCS (queued) lock first before spinning on the owner field. | |
| */ | |
| if (!osq_lock(&lock->osq)) | |
| goto fail; | |
| } | |
| for (;;) { | |
| struct task_struct *owner; | |
| if (use_ww_ctx && ww_ctx->acquired > 0) { | |
| struct ww_mutex *ww; | |
| ww = container_of(lock, struct ww_mutex, base); | |
| /* | |
| * If ww->ctx is set the contents are undefined, only | |
| * by acquiring wait_lock there is a guarantee that | |
| * they are not invalid when reading. | |
| * | |
| * As such, when deadlock detection needs to be | |
| * performed the optimistic spinning cannot be done. | |
| */ | |
| if (READ_ONCE(ww->ctx)) | |
| goto fail_unlock; | |
| } | |
| /* | |
| * If there's an owner, wait for it to either | |
| * release the lock or go to sleep. | |
| */ | |
| owner = __mutex_owner(lock); | |
| if (owner) { | |
| if (waiter && owner == task) { | |
| smp_mb(); /* ACQUIRE */ | |
| break; | |
| } | |
| if (!mutex_spin_on_owner(lock, owner)) | |
| goto fail_unlock; | |
| } | |
| /* Try to acquire the mutex if it is unlocked. */ | |
| if (__mutex_trylock(lock, waiter)) | |
| break; | |
| /* | |
| * The cpu_relax() call is a compiler barrier which forces | |
| * everything in this loop to be re-loaded. We don't need | |
| * memory barriers as we'll eventually observe the right | |
| * values at the cost of a few extra spins. | |
| */ | |
| cpu_relax(); | |
| } | |
| if (!waiter) | |
| osq_unlock(&lock->osq); | |
| return true; | |
| fail_unlock: | |
| if (!waiter) | |
| osq_unlock(&lock->osq); | |
| fail: | |
| /* | |
| * If we fell out of the spin path because of need_resched(), | |
| * reschedule now, before we try-lock the mutex. This avoids getting | |
| * scheduled out right after we obtained the mutex. | |
| */ | |
| if (need_resched()) { | |
| /* | |
| * We _should_ have TASK_RUNNING here, but just in case | |
| * we do not, make it so, otherwise we might get stuck. | |
| */ | |
| __set_current_state(TASK_RUNNING); | |
| schedule_preempt_disabled(); | |
| } | |
| return false; | |
| } | |
| #else | |
| static bool mutex_optimistic_spin(struct mutex *lock, | |
| struct ww_acquire_ctx *ww_ctx, | |
| const bool use_ww_ctx, const bool waiter) | |
| { | |
| return false; | |
| } | |
| #endif | |
| static noinline void __sched __mutex_unlock_slowpath(struct mutex *lock, unsigned long ip); | |
| /** | |
| * mutex_unlock - release the mutex | |
| * @lock: the mutex to be released | |
| * | |
| * Unlock a mutex that has been locked by this task previously. | |
| * | |
| * This function must not be used in interrupt context. Unlocking | |
| * of a not locked mutex is not allowed. | |
| * | |
| * This function is similar to (but not equivalent to) up(). | |
| */ | |
| void __sched mutex_unlock(struct mutex *lock) | |
| { | |
| #ifndef CONFIG_DEBUG_LOCK_ALLOC | |
| if (__mutex_unlock_fast(lock)) | |
| return; | |
| #endif | |
| __mutex_unlock_slowpath(lock, _RET_IP_); | |
| } | |
| EXPORT_SYMBOL(mutex_unlock); | |
| /** | |
| * ww_mutex_unlock - release the w/w mutex | |
| * @lock: the mutex to be released | |
| * | |
| * Unlock a mutex that has been locked by this task previously with any of the | |
| * ww_mutex_lock* functions (with or without an acquire context). It is | |
| * forbidden to release the locks after releasing the acquire context. | |
| * | |
| * This function must not be used in interrupt context. Unlocking | |
| * of a unlocked mutex is not allowed. | |
| */ | |
| void __sched ww_mutex_unlock(struct ww_mutex *lock) | |
| { | |
| /* | |
| * The unlocking fastpath is the 0->1 transition from 'locked' | |
| * into 'unlocked' state: | |
| */ | |
| if (lock->ctx) { | |
| #ifdef CONFIG_DEBUG_MUTEXES | |
| DEBUG_LOCKS_WARN_ON(!lock->ctx->acquired); | |
| #endif | |
| if (lock->ctx->acquired > 0) | |
| lock->ctx->acquired--; | |
| lock->ctx = NULL; | |
| } | |
| mutex_unlock(&lock->base); | |
| } | |
| EXPORT_SYMBOL(ww_mutex_unlock); | |
| static inline int __sched | |
| __ww_mutex_lock_check_stamp(struct mutex *lock, struct ww_acquire_ctx *ctx) | |
| { | |
| struct ww_mutex *ww = container_of(lock, struct ww_mutex, base); | |
| struct ww_acquire_ctx *hold_ctx = READ_ONCE(ww->ctx); | |
| if (!hold_ctx) | |
| return 0; | |
| if (ctx->stamp - hold_ctx->stamp <= LONG_MAX && | |
| (ctx->stamp != hold_ctx->stamp || ctx > hold_ctx)) { | |
| #ifdef CONFIG_DEBUG_MUTEXES | |
| DEBUG_LOCKS_WARN_ON(ctx->contending_lock); | |
| ctx->contending_lock = ww; | |
| #endif | |
| return -EDEADLK; | |
| } | |
| return 0; | |
| } | |
| /* | |
| * Lock a mutex (possibly interruptible), slowpath: | |
| */ | |
| static __always_inline int __sched | |
| __mutex_lock_common(struct mutex *lock, long state, unsigned int subclass, | |
| struct lockdep_map *nest_lock, unsigned long ip, | |
| struct ww_acquire_ctx *ww_ctx, const bool use_ww_ctx) | |
| { | |
| struct task_struct *task = current; | |
| struct mutex_waiter waiter; | |
| unsigned long flags; | |
| bool first = false; | |
| struct ww_mutex *ww; | |
| int ret; | |
| if (use_ww_ctx) { | |
| ww = container_of(lock, struct ww_mutex, base); | |
| if (unlikely(ww_ctx == READ_ONCE(ww->ctx))) | |
| return -EALREADY; | |
| } | |
| preempt_disable(); | |
| mutex_acquire_nest(&lock->dep_map, subclass, 0, nest_lock, ip); | |
| if (__mutex_trylock(lock, false) || | |
| mutex_optimistic_spin(lock, ww_ctx, use_ww_ctx, false)) { | |
| /* got the lock, yay! */ | |
| lock_acquired(&lock->dep_map, ip); | |
| if (use_ww_ctx) | |
| ww_mutex_set_context_fastpath(ww, ww_ctx); | |
| preempt_enable(); | |
| return 0; | |
| } | |
| spin_lock_mutex(&lock->wait_lock, flags); | |
| /* | |
| * After waiting to acquire the wait_lock, try again. | |
| */ | |
| if (__mutex_trylock(lock, false)) | |
| goto skip_wait; | |
| debug_mutex_lock_common(lock, &waiter); | |
| debug_mutex_add_waiter(lock, &waiter, task); | |
| /* add waiting tasks to the end of the waitqueue (FIFO): */ | |
| list_add_tail(&waiter.list, &lock->wait_list); | |
| waiter.task = task; | |
| if (__mutex_waiter_is_first(lock, &waiter)) | |
| __mutex_set_flag(lock, MUTEX_FLAG_WAITERS); | |
| lock_contended(&lock->dep_map, ip); | |
| set_task_state(task, state); | |
| for (;;) { | |
| /* | |
| * Once we hold wait_lock, we're serialized against | |
| * mutex_unlock() handing the lock off to us, do a trylock | |
| * before testing the error conditions to make sure we pick up | |
| * the handoff. | |
| */ | |
| if (__mutex_trylock(lock, first)) | |
| goto acquired; | |
| /* | |
| * Check for signals and wound conditions while holding | |
| * wait_lock. This ensures the lock cancellation is ordered | |
| * against mutex_unlock() and wake-ups do not go missing. | |
| */ | |
| if (unlikely(signal_pending_state(state, task))) { | |
| ret = -EINTR; | |
| goto err; | |
| } | |
| if (use_ww_ctx && ww_ctx->acquired > 0) { | |
| ret = __ww_mutex_lock_check_stamp(lock, ww_ctx); | |
| if (ret) | |
| goto err; | |
| } | |
| spin_unlock_mutex(&lock->wait_lock, flags); | |
| schedule_preempt_disabled(); | |
| if (!first && __mutex_waiter_is_first(lock, &waiter)) { | |
| first = true; | |
| __mutex_set_flag(lock, MUTEX_FLAG_HANDOFF); | |
| } | |
| set_task_state(task, state); | |
| /* | |
| * Here we order against unlock; we must either see it change | |
| * state back to RUNNING and fall through the next schedule(), | |
| * or we must see its unlock and acquire. | |
| */ | |
| if ((first && mutex_optimistic_spin(lock, ww_ctx, use_ww_ctx, true)) || | |
| __mutex_trylock(lock, first)) | |
| break; | |
| spin_lock_mutex(&lock->wait_lock, flags); | |
| } | |
| spin_lock_mutex(&lock->wait_lock, flags); | |
| acquired: | |
| __set_task_state(task, TASK_RUNNING); | |
| mutex_remove_waiter(lock, &waiter, task); | |
| if (likely(list_empty(&lock->wait_list))) | |
| __mutex_clear_flag(lock, MUTEX_FLAGS); | |
| debug_mutex_free_waiter(&waiter); | |
| skip_wait: | |
| /* got the lock - cleanup and rejoice! */ | |
| lock_acquired(&lock->dep_map, ip); | |
| if (use_ww_ctx) | |
| ww_mutex_set_context_slowpath(ww, ww_ctx); | |
| spin_unlock_mutex(&lock->wait_lock, flags); | |
| preempt_enable(); | |
| return 0; | |
| err: | |
| __set_task_state(task, TASK_RUNNING); | |
| mutex_remove_waiter(lock, &waiter, task); | |
| spin_unlock_mutex(&lock->wait_lock, flags); | |
| debug_mutex_free_waiter(&waiter); | |
| mutex_release(&lock->dep_map, 1, ip); | |
| preempt_enable(); | |
| return ret; | |
| } | |
| #ifdef CONFIG_DEBUG_LOCK_ALLOC | |
| void __sched | |
| mutex_lock_nested(struct mutex *lock, unsigned int subclass) | |
| { | |
| might_sleep(); | |
| __mutex_lock_common(lock, TASK_UNINTERRUPTIBLE, | |
| subclass, NULL, _RET_IP_, NULL, 0); | |
| } | |
| EXPORT_SYMBOL_GPL(mutex_lock_nested); | |
| void __sched | |
| _mutex_lock_nest_lock(struct mutex *lock, struct lockdep_map *nest) | |
| { | |
| might_sleep(); | |
| __mutex_lock_common(lock, TASK_UNINTERRUPTIBLE, | |
| 0, nest, _RET_IP_, NULL, 0); | |
| } | |
| EXPORT_SYMBOL_GPL(_mutex_lock_nest_lock); | |
| int __sched | |
| mutex_lock_killable_nested(struct mutex *lock, unsigned int subclass) | |
| { | |
| might_sleep(); | |
| return __mutex_lock_common(lock, TASK_KILLABLE, | |
| subclass, NULL, _RET_IP_, NULL, 0); | |
| } | |
| EXPORT_SYMBOL_GPL(mutex_lock_killable_nested); | |
| int __sched | |
| mutex_lock_interruptible_nested(struct mutex *lock, unsigned int subclass) | |
| { | |
| might_sleep(); | |
| return __mutex_lock_common(lock, TASK_INTERRUPTIBLE, | |
| subclass, NULL, _RET_IP_, NULL, 0); | |
| } | |
| EXPORT_SYMBOL_GPL(mutex_lock_interruptible_nested); | |
| static inline int | |
| ww_mutex_deadlock_injection(struct ww_mutex *lock, struct ww_acquire_ctx *ctx) | |
| { | |
| #ifdef CONFIG_DEBUG_WW_MUTEX_SLOWPATH | |
| unsigned tmp; | |
| if (ctx->deadlock_inject_countdown-- == 0) { | |
| tmp = ctx->deadlock_inject_interval; | |
| if (tmp > UINT_MAX/4) | |
| tmp = UINT_MAX; | |
| else | |
| tmp = tmp*2 + tmp + tmp/2; | |
| ctx->deadlock_inject_interval = tmp; | |
| ctx->deadlock_inject_countdown = tmp; | |
| ctx->contending_lock = lock; | |
| ww_mutex_unlock(lock); | |
| return -EDEADLK; | |
| } | |
| #endif | |
| return 0; | |
| } | |
| int __sched | |
| __ww_mutex_lock(struct ww_mutex *lock, struct ww_acquire_ctx *ctx) | |
| { | |
| int ret; | |
| might_sleep(); | |
| ret = __mutex_lock_common(&lock->base, TASK_UNINTERRUPTIBLE, | |
| 0, &ctx->dep_map, _RET_IP_, ctx, 1); | |
| if (!ret && ctx->acquired > 1) | |
| return ww_mutex_deadlock_injection(lock, ctx); | |
| return ret; | |
| } | |
| EXPORT_SYMBOL_GPL(__ww_mutex_lock); | |
| int __sched | |
| __ww_mutex_lock_interruptible(struct ww_mutex *lock, struct ww_acquire_ctx *ctx) | |
| { | |
| int ret; | |
| might_sleep(); | |
| ret = __mutex_lock_common(&lock->base, TASK_INTERRUPTIBLE, | |
| 0, &ctx->dep_map, _RET_IP_, ctx, 1); | |
| if (!ret && ctx->acquired > 1) | |
| return ww_mutex_deadlock_injection(lock, ctx); | |
| return ret; | |
| } | |
| EXPORT_SYMBOL_GPL(__ww_mutex_lock_interruptible); | |
| #endif | |
| /* | |
| * Release the lock, slowpath: | |
| */ | |
| static noinline void __sched __mutex_unlock_slowpath(struct mutex *lock, unsigned long ip) | |
| { | |
| struct task_struct *next = NULL; | |
| unsigned long owner, flags; | |
| DEFINE_WAKE_Q(wake_q); | |
| mutex_release(&lock->dep_map, 1, ip); | |
| /* | |
| * Release the lock before (potentially) taking the spinlock such that | |
| * other contenders can get on with things ASAP. | |
| * | |
| * Except when HANDOFF, in that case we must not clear the owner field, | |
| * but instead set it to the top waiter. | |
| */ | |
| owner = atomic_long_read(&lock->owner); | |
| for (;;) { | |
| unsigned long old; | |
| #ifdef CONFIG_DEBUG_MUTEXES | |
| DEBUG_LOCKS_WARN_ON(__owner_task(owner) != current); | |
| #endif | |
| if (owner & MUTEX_FLAG_HANDOFF) | |
| break; | |
| old = atomic_long_cmpxchg_release(&lock->owner, owner, | |
| __owner_flags(owner)); | |
| if (old == owner) { | |
| if (owner & MUTEX_FLAG_WAITERS) | |
| break; | |
| return; | |
| } | |
| owner = old; | |
| } | |
| spin_lock_mutex(&lock->wait_lock, flags); | |
| debug_mutex_unlock(lock); | |
| if (!list_empty(&lock->wait_list)) { | |
| /* get the first entry from the wait-list: */ | |
| struct mutex_waiter *waiter = | |
| list_first_entry(&lock->wait_list, | |
| struct mutex_waiter, list); | |
| next = waiter->task; | |
| debug_mutex_wake_waiter(lock, waiter); | |
| wake_q_add(&wake_q, next); | |
| } | |
| if (owner & MUTEX_FLAG_HANDOFF) | |
| __mutex_handoff(lock, next); | |
| spin_unlock_mutex(&lock->wait_lock, flags); | |
| wake_up_q(&wake_q); | |
| } | |
| #ifndef CONFIG_DEBUG_LOCK_ALLOC | |
| /* | |
| * Here come the less common (and hence less performance-critical) APIs: | |
| * mutex_lock_interruptible() and mutex_trylock(). | |
| */ | |
| static noinline int __sched | |
| __mutex_lock_killable_slowpath(struct mutex *lock); | |
| static noinline int __sched | |
| __mutex_lock_interruptible_slowpath(struct mutex *lock); | |
| /** | |
| * mutex_lock_interruptible - acquire the mutex, interruptible | |
| * @lock: the mutex to be acquired | |
| * | |
| * Lock the mutex like mutex_lock(), and return 0 if the mutex has | |
| * been acquired or sleep until the mutex becomes available. If a | |
| * signal arrives while waiting for the lock then this function | |
| * returns -EINTR. | |
| * | |
| * This function is similar to (but not equivalent to) down_interruptible(). | |
| */ | |
| int __sched mutex_lock_interruptible(struct mutex *lock) | |
| { | |
| might_sleep(); | |
| if (__mutex_trylock_fast(lock)) | |
| return 0; | |
| return __mutex_lock_interruptible_slowpath(lock); | |
| } | |
| EXPORT_SYMBOL(mutex_lock_interruptible); | |
| int __sched mutex_lock_killable(struct mutex *lock) | |
| { | |
| might_sleep(); | |
| if (__mutex_trylock_fast(lock)) | |
| return 0; | |
| return __mutex_lock_killable_slowpath(lock); | |
| } | |
| EXPORT_SYMBOL(mutex_lock_killable); | |
| static noinline void __sched | |
| __mutex_lock_slowpath(struct mutex *lock) | |
| { | |
| __mutex_lock_common(lock, TASK_UNINTERRUPTIBLE, 0, | |
| NULL, _RET_IP_, NULL, 0); | |
| } | |
| static noinline int __sched | |
| __mutex_lock_killable_slowpath(struct mutex *lock) | |
| { | |
| return __mutex_lock_common(lock, TASK_KILLABLE, 0, | |
| NULL, _RET_IP_, NULL, 0); | |
| } | |
| static noinline int __sched | |
| __mutex_lock_interruptible_slowpath(struct mutex *lock) | |
| { | |
| return __mutex_lock_common(lock, TASK_INTERRUPTIBLE, 0, | |
| NULL, _RET_IP_, NULL, 0); | |
| } | |
| static noinline int __sched | |
| __ww_mutex_lock_slowpath(struct ww_mutex *lock, struct ww_acquire_ctx *ctx) | |
| { | |
| return __mutex_lock_common(&lock->base, TASK_UNINTERRUPTIBLE, 0, | |
| NULL, _RET_IP_, ctx, 1); | |
| } | |
| static noinline int __sched | |
| __ww_mutex_lock_interruptible_slowpath(struct ww_mutex *lock, | |
| struct ww_acquire_ctx *ctx) | |
| { | |
| return __mutex_lock_common(&lock->base, TASK_INTERRUPTIBLE, 0, | |
| NULL, _RET_IP_, ctx, 1); | |
| } | |
| #endif | |
| /** | |
| * mutex_trylock - try to acquire the mutex, without waiting | |
| * @lock: the mutex to be acquired | |
| * | |
| * Try to acquire the mutex atomically. Returns 1 if the mutex | |
| * has been acquired successfully, and 0 on contention. | |
| * | |
| * NOTE: this function follows the spin_trylock() convention, so | |
| * it is negated from the down_trylock() return values! Be careful | |
| * about this when converting semaphore users to mutexes. | |
| * | |
| * This function must not be used in interrupt context. The | |
| * mutex must be released by the same task that acquired it. | |
| */ | |
| int __sched mutex_trylock(struct mutex *lock) | |
| { | |
| bool locked = __mutex_trylock(lock, false); | |
| if (locked) | |
| mutex_acquire(&lock->dep_map, 0, 1, _RET_IP_); | |
| return locked; | |
| } | |
| EXPORT_SYMBOL(mutex_trylock); | |
| #ifndef CONFIG_DEBUG_LOCK_ALLOC | |
| int __sched | |
| __ww_mutex_lock(struct ww_mutex *lock, struct ww_acquire_ctx *ctx) | |
| { | |
| might_sleep(); | |
| if (__mutex_trylock_fast(&lock->base)) { | |
| ww_mutex_set_context_fastpath(lock, ctx); | |
| return 0; | |
| } | |
| return __ww_mutex_lock_slowpath(lock, ctx); | |
| } | |
| EXPORT_SYMBOL(__ww_mutex_lock); | |
| int __sched | |
| __ww_mutex_lock_interruptible(struct ww_mutex *lock, struct ww_acquire_ctx *ctx) | |
| { | |
| might_sleep(); | |
| if (__mutex_trylock_fast(&lock->base)) { | |
| ww_mutex_set_context_fastpath(lock, ctx); | |
| return 0; | |
| } | |
| return __ww_mutex_lock_interruptible_slowpath(lock, ctx); | |
| } | |
| EXPORT_SYMBOL(__ww_mutex_lock_interruptible); | |
| #endif | |
| /** | |
| * atomic_dec_and_mutex_lock - return holding mutex if we dec to 0 | |
| * @cnt: the atomic which we are to dec | |
| * @lock: the mutex to return holding if we dec to 0 | |
| * | |
| * return true and hold lock if we dec to 0, return false otherwise | |
| */ | |
| int atomic_dec_and_mutex_lock(atomic_t *cnt, struct mutex *lock) | |
| { | |
| /* dec if we can't possibly hit 0 */ | |
| if (atomic_add_unless(cnt, -1, 1)) | |
| return 0; | |
| /* we might hit 0, so take the lock */ | |
| mutex_lock(lock); | |
| if (!atomic_dec_and_test(cnt)) { | |
| /* when we actually did the dec, we didn't hit 0 */ | |
| mutex_unlock(lock); | |
| return 0; | |
| } | |
| /* we hit 0, and we hold the lock */ | |
| return 1; | |
| } | |
| EXPORT_SYMBOL(atomic_dec_and_mutex_lock); |