drivers/net/ethernet/8390/xsurf100.c - linux - Git at Google

 // SPDX-License-Identifier: GPL-2.0
 #include <linux/module.h>
 #include <linux/netdevice.h>
 #include <linux/platform_device.h>
 #include <linux/zorro.h>
 #include <net/ax88796.h>
 #include <asm/amigaints.h>

 #define ZORRO_PROD_INDIVIDUAL_COMPUTERS_X_SURF100 \
 		ZORRO_ID(INDIVIDUAL_COMPUTERS, 0x64, 0)

 #define XS100_IRQSTATUS_BASE 0x40
 #define XS100_8390_BASE 0x800

 /* Longword-access area. Translated to 2 16-bit access cycles by the
  * X-Surf 100 FPGA
  */
 #define XS100_8390_DATA32_BASE 0x8000
 #define XS100_8390_DATA32_SIZE 0x2000
 /* Sub-Areas for fast data register access; addresses relative to area begin */
 #define XS100_8390_DATA_READ32_BASE 0x0880
 #define XS100_8390_DATA_WRITE32_BASE 0x0C80
 #define XS100_8390_DATA_AREA_SIZE 0x80

 #define __NS8390_init ax_NS8390_init

 /* force unsigned long back to 'void __iomem *' */
 #define ax_convert_addr(_a) ((void __force __iomem *)(_a))

 #define ei_inb(_a) z_readb(ax_convert_addr(_a))
 #define ei_outb(_v, _a) z_writeb(_v, ax_convert_addr(_a))

 #define ei_inw(_a) z_readw(ax_convert_addr(_a))
 #define ei_outw(_v, _a) z_writew(_v, ax_convert_addr(_a))

 #define ei_inb_p(_a) ei_inb(_a)
 #define ei_outb_p(_v, _a) ei_outb(_v, _a)

 /* define EI_SHIFT() to take into account our register offsets */
 #define EI_SHIFT(x) (ei_local->reg_offset[(x)])

 /* Ensure we have our RCR base value */
 #define AX88796_PLATFORM

 static unsigned char version[] =
 		"ax88796.c: Copyright 2005,2007 Simtec Electronics\n";

 #include "lib8390.c"

 /* from ne.c */
 #define NE_CMD		EI_SHIFT(0x00)
 #define NE_RESET	EI_SHIFT(0x1f)
 #define NE_DATAPORT	EI_SHIFT(0x10)

 struct xsurf100_ax_plat_data {
 	struct ax_plat_data ax;
 	void __iomem *base_regs;
 	void __iomem *data_area;
 };

 static int is_xsurf100_network_irq(struct platform_device *pdev)
 {
 	struct xsurf100_ax_plat_data *xs100 = dev_get_platdata(&pdev->dev);

 	return (readw(xs100->base_regs + XS100_IRQSTATUS_BASE) & 0xaaaa) != 0;
 }

 /* These functions guarantee that the iomem is accessed with 32 bit
  * cycles only. z_memcpy_fromio / z_memcpy_toio don't
  */
 static void z_memcpy_fromio32(void *dst, const void __iomem *src, size_t bytes)
 {
 	while (bytes > 32) {
 		asm __volatile__
 		   ("movem.l (%0)+,%%d0-%%d7\n"
 		    "movem.l %%d0-%%d7,(%1)\n"
 		    "adda.l #32,%1" : "=a"(src), "=a"(dst)
 		    : "0"(src), "1"(dst) : "d0", "d1", "d2", "d3", "d4",
 					   "d5", "d6", "d7", "memory");
 		bytes -= 32;
 	}
 	while (bytes) {
 		*(uint32_t *)dst = z_readl(src);
 		src += 4;
 		dst += 4;
 		bytes -= 4;
 	}
 }

 static void z_memcpy_toio32(void __iomem *dst, const void *src, size_t bytes)
 {
 	while (bytes) {
 		z_writel(*(const uint32_t *)src, dst);
 		src += 4;
 		dst += 4;
 		bytes -= 4;
 	}
 }

 static void xs100_write(struct net_device *dev, const void *src,
 			unsigned int count)
 {
 	struct ei_device *ei_local = netdev_priv(dev);
 	struct platform_device *pdev = to_platform_device(dev->dev.parent);
 	struct xsurf100_ax_plat_data *xs100 = dev_get_platdata(&pdev->dev);

 	/* copy whole blocks */
 	while (count > XS100_8390_DATA_AREA_SIZE) {
 		z_memcpy_toio32(xs100->data_area +
 				XS100_8390_DATA_WRITE32_BASE, src,
 				XS100_8390_DATA_AREA_SIZE);
 		src += XS100_8390_DATA_AREA_SIZE;
 		count -= XS100_8390_DATA_AREA_SIZE;
 	}
 	/* copy whole dwords */
 	z_memcpy_toio32(xs100->data_area + XS100_8390_DATA_WRITE32_BASE,
 			src, count & ~3);
 	src += count & ~3;
 	if (count & 2) {
 		ei_outw(*(uint16_t *)src, ei_local->mem + NE_DATAPORT);
 		src += 2;
 	}
 	if (count & 1)
 		ei_outb(*(uint8_t *)src, ei_local->mem + NE_DATAPORT);
 }

 static void xs100_read(struct net_device *dev, void *dst, unsigned int count)
 {
 	struct ei_device *ei_local = netdev_priv(dev);
 	struct platform_device *pdev = to_platform_device(dev->dev.parent);
 	struct xsurf100_ax_plat_data *xs100 = dev_get_platdata(&pdev->dev);

 	/* copy whole blocks */
 	while (count > XS100_8390_DATA_AREA_SIZE) {
 		z_memcpy_fromio32(dst, xs100->data_area +
 				  XS100_8390_DATA_READ32_BASE,
 				  XS100_8390_DATA_AREA_SIZE);
 		dst += XS100_8390_DATA_AREA_SIZE;
 		count -= XS100_8390_DATA_AREA_SIZE;
 	}
 	/* copy whole dwords */
 	z_memcpy_fromio32(dst, xs100->data_area + XS100_8390_DATA_READ32_BASE,
 			  count & ~3);
 	dst += count & ~3;
 	if (count & 2) {
 		*(uint16_t *)dst = ei_inw(ei_local->mem + NE_DATAPORT);
 		dst += 2;
 	}
 	if (count & 1)
 		*(uint8_t *)dst = ei_inb(ei_local->mem + NE_DATAPORT);
 }

 /* Block input and output, similar to the Crynwr packet driver. If
  * you are porting to a new ethercard, look at the packet driver
  * source for hints. The NEx000 doesn't share the on-board packet
  * memory -- you have to put the packet out through the "remote DMA"
  * dataport using ei_outb.
  */
 static void xs100_block_input(struct net_device *dev, int count,
 			      struct sk_buff *skb, int ring_offset)
 {
 	struct ei_device *ei_local = netdev_priv(dev);
 	void __iomem *nic_base = ei_local->mem;
 	char *buf = skb->data;

 	if (ei_local->dmaing) {
 		netdev_err(dev,
 			   "DMAing conflict in %s [DMAstat:%d][irqlock:%d]\n",
 			   __func__,
 			   ei_local->dmaing, ei_local->irqlock);
 		return;
 	}

 	ei_local->dmaing |= 0x01;

 	ei_outb(E8390_NODMA + E8390_PAGE0 + E8390_START, nic_base + NE_CMD);
 	ei_outb(count & 0xff, nic_base + EN0_RCNTLO);
 	ei_outb(count >> 8, nic_base + EN0_RCNTHI);
 	ei_outb(ring_offset & 0xff, nic_base + EN0_RSARLO);
 	ei_outb(ring_offset >> 8, nic_base + EN0_RSARHI);
 	ei_outb(E8390_RREAD + E8390_START, nic_base + NE_CMD);

 	xs100_read(dev, buf, count);

 	ei_local->dmaing &= ~1;
 }

 static void xs100_block_output(struct net_device *dev, int count,
 			       const unsigned char *buf, const int start_page)
 {
 	struct ei_device *ei_local = netdev_priv(dev);
 	void __iomem *nic_base = ei_local->mem;
 	unsigned long dma_start;

 	/* Round the count up for word writes. Do we need to do this?
 	 * What effect will an odd byte count have on the 8390?  I
 	 * should check someday.
 	 */
 	if (ei_local->word16 && (count & 0x01))
 		count++;

 	/* This *shouldn't* happen. If it does, it's the last thing
 	 * you'll see
 	 */
 	if (ei_local->dmaing) {
 		netdev_err(dev,
 			   "DMAing conflict in %s [DMAstat:%d][irqlock:%d]\n",
 			   __func__,
 			   ei_local->dmaing, ei_local->irqlock);
 		return;
 	}

 	ei_local->dmaing |= 0x01;
 	/* We should already be in page 0, but to be safe... */
 	ei_outb(E8390_PAGE0 + E8390_START + E8390_NODMA, nic_base + NE_CMD);

 	ei_outb(ENISR_RDC, nic_base + EN0_ISR);

 	/* Now the normal output. */
 	ei_outb(count & 0xff, nic_base + EN0_RCNTLO);
 	ei_outb(count >> 8, nic_base + EN0_RCNTHI);
 	ei_outb(0x00, nic_base + EN0_RSARLO);
 	ei_outb(start_page, nic_base + EN0_RSARHI);

 	ei_outb(E8390_RWRITE + E8390_START, nic_base + NE_CMD);

 	xs100_write(dev, buf, count);

 	dma_start = jiffies;

 	while ((ei_inb(nic_base + EN0_ISR) & ENISR_RDC) == 0) {
 		if (jiffies - dma_start > 2 * HZ / 100) {	/* 20ms */
 			netdev_warn(dev, "timeout waiting for Tx RDC.\n");
 			ei_local->reset_8390(dev);
 			ax_NS8390_init(dev, 1);
 			break;
 		}
 	}

 	ei_outb(ENISR_RDC, nic_base + EN0_ISR);	/* Ack intr. */
 	ei_local->dmaing &= ~0x01;
 }

 static int xsurf100_probe(struct zorro_dev *zdev,
 			  const struct zorro_device_id *ent)
 {
 	struct platform_device *pdev;
 	struct xsurf100_ax_plat_data ax88796_data;
 	struct resource res[2] = {
 		DEFINE_RES_NAMED(IRQ_AMIGA_PORTS, 1, NULL,
 				 IORESOURCE_IRQ | IORESOURCE_IRQ_SHAREABLE),
 		DEFINE_RES_MEM(zdev->resource.start + XS100_8390_BASE,
 			       4 * 0x20)
 	};
 	int reg;
 	/* This table is referenced in the device structure, so it must
 	 * outlive the scope of xsurf100_probe.
 	 */
 	static u32 reg_offsets[32];
 	int ret = 0;

 	/* X-Surf 100 control and 32 bit ring buffer data access areas.
 	 * These resources are not used by the ax88796 driver, so must
 	 * be requested here and passed via platform data.
 	 */

 	if (!request_mem_region(zdev->resource.start, 0x100, zdev->name)) {
 		dev_err(&zdev->dev, "cannot reserve X-Surf 100 control registers\n");
 		return -ENXIO;
 	}

 	if (!request_mem_region(zdev->resource.start +
 				XS100_8390_DATA32_BASE,
 				XS100_8390_DATA32_SIZE,
 				"X-Surf 100 32-bit data access")) {
 		dev_err(&zdev->dev, "cannot reserve 32-bit area\n");
 		ret = -ENXIO;
 		goto exit_req;
 	}

 	for (reg = 0; reg < 0x20; reg++)
 		reg_offsets[reg] = 4 * reg;

 	memset(&ax88796_data, 0, sizeof(ax88796_data));
 	ax88796_data.ax.flags = AXFLG_HAS_EEPROM;
 	ax88796_data.ax.wordlength = 2;
 	ax88796_data.ax.dcr_val = 0x48;
 	ax88796_data.ax.rcr_val = 0x40;
 	ax88796_data.ax.reg_offsets = reg_offsets;
 	ax88796_data.ax.check_irq = is_xsurf100_network_irq;
 	ax88796_data.base_regs = ioremap(zdev->resource.start, 0x100);

 	/* error handling for ioremap regs */
 	if (!ax88796_data.base_regs) {
 		dev_err(&zdev->dev, "Cannot ioremap area %pR (registers)\n",
 			&zdev->resource);

 		ret = -ENXIO;
 		goto exit_req2;
 	}

 	ax88796_data.data_area = ioremap(zdev->resource.start +
 			XS100_8390_DATA32_BASE, XS100_8390_DATA32_SIZE);

 	/* error handling for ioremap data */
 	if (!ax88796_data.data_area) {
 		dev_err(&zdev->dev,
 			"Cannot ioremap area %pR offset %x (32-bit access)\n",
 			&zdev->resource,  XS100_8390_DATA32_BASE);

 		ret = -ENXIO;
 		goto exit_mem;
 	}

 	ax88796_data.ax.block_output = xs100_block_output;
 	ax88796_data.ax.block_input = xs100_block_input;

 	pdev = platform_device_register_resndata(&zdev->dev, "ax88796",
 						 zdev->slotaddr, res, 2,
 						 &ax88796_data,
 						 sizeof(ax88796_data));

 	if (IS_ERR(pdev)) {
 		dev_err(&zdev->dev, "cannot register platform device\n");
 		ret = -ENXIO;
 		goto exit_mem2;
 	}

 	zorro_set_drvdata(zdev, pdev);

 	if (!ret)
 		return 0;

  exit_mem2:
 	iounmap(ax88796_data.data_area);

  exit_mem:
 	iounmap(ax88796_data.base_regs);

  exit_req2:
 	release_mem_region(zdev->resource.start + XS100_8390_DATA32_BASE,
 			   XS100_8390_DATA32_SIZE);

  exit_req:
 	release_mem_region(zdev->resource.start, 0x100);

 	return ret;
 }

 static void xsurf100_remove(struct zorro_dev *zdev)
 {
 	struct platform_device *pdev = zorro_get_drvdata(zdev);
 	struct xsurf100_ax_plat_data *xs100 = dev_get_platdata(&pdev->dev);

 	platform_device_unregister(pdev);

 	iounmap(xs100->base_regs);
 	release_mem_region(zdev->resource.start, 0x100);
 	iounmap(xs100->data_area);
 	release_mem_region(zdev->resource.start + XS100_8390_DATA32_BASE,
 			   XS100_8390_DATA32_SIZE);
 }

 static const struct zorro_device_id xsurf100_zorro_tbl[] = {
 	{ ZORRO_PROD_INDIVIDUAL_COMPUTERS_X_SURF100, },
 	{ 0 }
 };

 MODULE_DEVICE_TABLE(zorro, xsurf100_zorro_tbl);

 static struct zorro_driver xsurf100_driver = {
 	.name           = "xsurf100",
 	.id_table       = xsurf100_zorro_tbl,
 	.probe          = xsurf100_probe,
 	.remove         = xsurf100_remove,
 };

 module_driver(xsurf100_driver, zorro_register_driver, zorro_unregister_driver);

 MODULE_DESCRIPTION("X-Surf 100 driver");
 MODULE_AUTHOR("Michael Karcher <kernel@mkarcher.dialup.fu-berlin.de>");
 MODULE_LICENSE("GPL v2");
	// SPDX-License-Identifier: GPL-2.0
	#include <linux/module.h>
	#include <linux/netdevice.h>
	#include <linux/platform_device.h>
	#include <linux/zorro.h>
	#include <net/ax88796.h>
	#include <asm/amigaints.h>

	#define ZORRO_PROD_INDIVIDUAL_COMPUTERS_X_SURF100 \
	ZORRO_ID(INDIVIDUAL_COMPUTERS, 0x64, 0)

	#define XS100_IRQSTATUS_BASE 0x40
	#define XS100_8390_BASE 0x800

	/* Longword-access area. Translated to 2 16-bit access cycles by the
	* X-Surf 100 FPGA
	*/
	#define XS100_8390_DATA32_BASE 0x8000
	#define XS100_8390_DATA32_SIZE 0x2000
	/* Sub-Areas for fast data register access; addresses relative to area begin */
	#define XS100_8390_DATA_READ32_BASE 0x0880
	#define XS100_8390_DATA_WRITE32_BASE 0x0C80
	#define XS100_8390_DATA_AREA_SIZE 0x80

	#define __NS8390_init ax_NS8390_init

	/* force unsigned long back to 'void __iomem ' /
	#define ax_convert_addr(_a) ((void __force __iomem *)(_a))

	#define ei_inb(_a) z_readb(ax_convert_addr(_a))
	#define ei_outb(_v, _a) z_writeb(_v, ax_convert_addr(_a))

	#define ei_inw(_a) z_readw(ax_convert_addr(_a))
	#define ei_outw(_v, _a) z_writew(_v, ax_convert_addr(_a))

	#define ei_inb_p(_a) ei_inb(_a)
	#define ei_outb_p(_v, _a) ei_outb(_v, _a)

	/* define EI_SHIFT() to take into account our register offsets */
	#define EI_SHIFT(x) (ei_local->reg_offset[(x)])

	/* Ensure we have our RCR base value */
	#define AX88796_PLATFORM

	static unsigned char version[] =
	"ax88796.c: Copyright 2005,2007 Simtec Electronics\n";

	#include "lib8390.c"

	/* from ne.c */
	#define NE_CMD EI_SHIFT(0x00)
	#define NE_RESET EI_SHIFT(0x1f)
	#define NE_DATAPORT EI_SHIFT(0x10)

	struct xsurf100_ax_plat_data {
	struct ax_plat_data ax;
	void __iomem *base_regs;
	void __iomem *data_area;
	};

	static int is_xsurf100_network_irq(struct platform_device *pdev)
	{
	struct xsurf100_ax_plat_data *xs100 = dev_get_platdata(&pdev->dev);

	return (readw(xs100->base_regs + XS100_IRQSTATUS_BASE) & 0xaaaa) != 0;
	}

	/* These functions guarantee that the iomem is accessed with 32 bit
	* cycles only. z_memcpy_fromio / z_memcpy_toio don't
	*/
	static void z_memcpy_fromio32(void dst, const void __iomem src, size_t bytes)
	{
	while (bytes > 32) {
	asm __volatile__
	("movem.l (%0)+,%%d0-%%d7\n"
	"movem.l %%d0-%%d7,(%1)\n"
	"adda.l #32,%1" : "=a"(src), "=a"(dst)
	: "0"(src), "1"(dst) : "d0", "d1", "d2", "d3", "d4",
	"d5", "d6", "d7", "memory");
	bytes -= 32;
	}
	while (bytes) {
	(uint32_t )dst = z_readl(src);
	src += 4;
	dst += 4;
	bytes -= 4;
	}
	}

	static void z_memcpy_toio32(void __iomem dst, const void src, size_t bytes)
	{
	while (bytes) {
	z_writel((const uint32_t )src, dst);
	src += 4;
	dst += 4;
	bytes -= 4;
	}
	}

	static void xs100_write(struct net_device dev, const void src,
	unsigned int count)
	{
	struct ei_device *ei_local = netdev_priv(dev);
	struct platform_device *pdev = to_platform_device(dev->dev.parent);
	struct xsurf100_ax_plat_data *xs100 = dev_get_platdata(&pdev->dev);

	/* copy whole blocks */
	while (count > XS100_8390_DATA_AREA_SIZE) {
	z_memcpy_toio32(xs100->data_area +
	XS100_8390_DATA_WRITE32_BASE, src,
	XS100_8390_DATA_AREA_SIZE);
	src += XS100_8390_DATA_AREA_SIZE;
	count -= XS100_8390_DATA_AREA_SIZE;
	}
	/* copy whole dwords */
	z_memcpy_toio32(xs100->data_area + XS100_8390_DATA_WRITE32_BASE,
	src, count & ~3);
	src += count & ~3;
	if (count & 2) {
	ei_outw((uint16_t )src, ei_local->mem + NE_DATAPORT);
	src += 2;
	}
	if (count & 1)
	ei_outb((uint8_t )src, ei_local->mem + NE_DATAPORT);
	}

	static void xs100_read(struct net_device dev, void dst, unsigned int count)
	{
	struct ei_device *ei_local = netdev_priv(dev);
	struct platform_device *pdev = to_platform_device(dev->dev.parent);
	struct xsurf100_ax_plat_data *xs100 = dev_get_platdata(&pdev->dev);

	/* copy whole blocks */
	while (count > XS100_8390_DATA_AREA_SIZE) {
	z_memcpy_fromio32(dst, xs100->data_area +
	XS100_8390_DATA_READ32_BASE,
	XS100_8390_DATA_AREA_SIZE);
	dst += XS100_8390_DATA_AREA_SIZE;
	count -= XS100_8390_DATA_AREA_SIZE;
	}
	/* copy whole dwords */
	z_memcpy_fromio32(dst, xs100->data_area + XS100_8390_DATA_READ32_BASE,
	count & ~3);
	dst += count & ~3;
	if (count & 2) {
	(uint16_t )dst = ei_inw(ei_local->mem + NE_DATAPORT);
	dst += 2;
	}
	if (count & 1)
	(uint8_t )dst = ei_inb(ei_local->mem + NE_DATAPORT);
	}

	/* Block input and output, similar to the Crynwr packet driver. If
	* you are porting to a new ethercard, look at the packet driver
	* source for hints. The NEx000 doesn't share the on-board packet
	* memory -- you have to put the packet out through the "remote DMA"
	* dataport using ei_outb.
	*/
	static void xs100_block_input(struct net_device *dev, int count,
	struct sk_buff *skb, int ring_offset)
	{
	struct ei_device *ei_local = netdev_priv(dev);
	void __iomem *nic_base = ei_local->mem;
	char *buf = skb->data;

	if (ei_local->dmaing) {
	netdev_err(dev,
	"DMAing conflict in %s [DMAstat:%d][irqlock:%d]\n",
	__func__,
	ei_local->dmaing, ei_local->irqlock);
	return;
	}

	ei_local->dmaing \|= 0x01;

	ei_outb(E8390_NODMA + E8390_PAGE0 + E8390_START, nic_base + NE_CMD);
	ei_outb(count & 0xff, nic_base + EN0_RCNTLO);
	ei_outb(count >> 8, nic_base + EN0_RCNTHI);
	ei_outb(ring_offset & 0xff, nic_base + EN0_RSARLO);
	ei_outb(ring_offset >> 8, nic_base + EN0_RSARHI);
	ei_outb(E8390_RREAD + E8390_START, nic_base + NE_CMD);

	xs100_read(dev, buf, count);

	ei_local->dmaing &= ~1;
	}

	static void xs100_block_output(struct net_device *dev, int count,
	const unsigned char *buf, const int start_page)
	{
	struct ei_device *ei_local = netdev_priv(dev);
	void __iomem *nic_base = ei_local->mem;
	unsigned long dma_start;

	/* Round the count up for word writes. Do we need to do this?
	* What effect will an odd byte count have on the 8390? I
	* should check someday.
	*/
	if (ei_local->word16 && (count & 0x01))
	count++;

	/* This shouldn't happen. If it does, it's the last thing
	* you'll see
	*/
	if (ei_local->dmaing) {
	netdev_err(dev,
	"DMAing conflict in %s [DMAstat:%d][irqlock:%d]\n",
	__func__,
	ei_local->dmaing, ei_local->irqlock);
	return;
	}

	ei_local->dmaing \|= 0x01;
	/* We should already be in page 0, but to be safe... */
	ei_outb(E8390_PAGE0 + E8390_START + E8390_NODMA, nic_base + NE_CMD);

	ei_outb(ENISR_RDC, nic_base + EN0_ISR);

	/* Now the normal output. */
	ei_outb(count & 0xff, nic_base + EN0_RCNTLO);
	ei_outb(count >> 8, nic_base + EN0_RCNTHI);
	ei_outb(0x00, nic_base + EN0_RSARLO);
	ei_outb(start_page, nic_base + EN0_RSARHI);

	ei_outb(E8390_RWRITE + E8390_START, nic_base + NE_CMD);

	xs100_write(dev, buf, count);

	dma_start = jiffies;

	while ((ei_inb(nic_base + EN0_ISR) & ENISR_RDC) == 0) {
	if (jiffies - dma_start > 2 * HZ / 100) { /* 20ms */
	netdev_warn(dev, "timeout waiting for Tx RDC.\n");
	ei_local->reset_8390(dev);
	ax_NS8390_init(dev, 1);
	break;
	}
	}

	ei_outb(ENISR_RDC, nic_base + EN0_ISR); /* Ack intr. */
	ei_local->dmaing &= ~0x01;
	}

	static int xsurf100_probe(struct zorro_dev *zdev,
	const struct zorro_device_id *ent)
	{
	struct platform_device *pdev;
	struct xsurf100_ax_plat_data ax88796_data;
	struct resource res[2] = {
	DEFINE_RES_NAMED(IRQ_AMIGA_PORTS, 1, NULL,
	IORESOURCE_IRQ \| IORESOURCE_IRQ_SHAREABLE),
	DEFINE_RES_MEM(zdev->resource.start + XS100_8390_BASE,
	4 * 0x20)
	};
	int reg;
	/* This table is referenced in the device structure, so it must
	* outlive the scope of xsurf100_probe.
	*/
	static u32 reg_offsets[32];
	int ret = 0;

	/* X-Surf 100 control and 32 bit ring buffer data access areas.
	* These resources are not used by the ax88796 driver, so must
	* be requested here and passed via platform data.
	*/

	if (!request_mem_region(zdev->resource.start, 0x100, zdev->name)) {
	dev_err(&zdev->dev, "cannot reserve X-Surf 100 control registers\n");
	return -ENXIO;
	}

	if (!request_mem_region(zdev->resource.start +
	XS100_8390_DATA32_BASE,
	XS100_8390_DATA32_SIZE,
	"X-Surf 100 32-bit data access")) {
	dev_err(&zdev->dev, "cannot reserve 32-bit area\n");
	ret = -ENXIO;
	goto exit_req;
	}

	for (reg = 0; reg < 0x20; reg++)
	reg_offsets[reg] = 4 * reg;

	memset(&ax88796_data, 0, sizeof(ax88796_data));
	ax88796_data.ax.flags = AXFLG_HAS_EEPROM;
	ax88796_data.ax.wordlength = 2;
	ax88796_data.ax.dcr_val = 0x48;
	ax88796_data.ax.rcr_val = 0x40;
	ax88796_data.ax.reg_offsets = reg_offsets;
	ax88796_data.ax.check_irq = is_xsurf100_network_irq;
	ax88796_data.base_regs = ioremap(zdev->resource.start, 0x100);

	/* error handling for ioremap regs */
	if (!ax88796_data.base_regs) {
	dev_err(&zdev->dev, "Cannot ioremap area %pR (registers)\n",
	&zdev->resource);

	ret = -ENXIO;
	goto exit_req2;
	}

	ax88796_data.data_area = ioremap(zdev->resource.start +
	XS100_8390_DATA32_BASE, XS100_8390_DATA32_SIZE);

	/* error handling for ioremap data */
	if (!ax88796_data.data_area) {
	dev_err(&zdev->dev,
	"Cannot ioremap area %pR offset %x (32-bit access)\n",
	&zdev->resource, XS100_8390_DATA32_BASE);

	ret = -ENXIO;
	goto exit_mem;
	}

	ax88796_data.ax.block_output = xs100_block_output;
	ax88796_data.ax.block_input = xs100_block_input;

	pdev = platform_device_register_resndata(&zdev->dev, "ax88796",
	zdev->slotaddr, res, 2,
	&ax88796_data,
	sizeof(ax88796_data));

	if (IS_ERR(pdev)) {
	dev_err(&zdev->dev, "cannot register platform device\n");
	ret = -ENXIO;
	goto exit_mem2;
	}

	zorro_set_drvdata(zdev, pdev);

	if (!ret)
	return 0;

	exit_mem2:
	iounmap(ax88796_data.data_area);

	exit_mem:
	iounmap(ax88796_data.base_regs);

	exit_req2:
	release_mem_region(zdev->resource.start + XS100_8390_DATA32_BASE,
	XS100_8390_DATA32_SIZE);

	exit_req:
	release_mem_region(zdev->resource.start, 0x100);

	return ret;
	}

	static void xsurf100_remove(struct zorro_dev *zdev)
	{
	struct platform_device *pdev = zorro_get_drvdata(zdev);
	struct xsurf100_ax_plat_data *xs100 = dev_get_platdata(&pdev->dev);

	platform_device_unregister(pdev);

	iounmap(xs100->base_regs);
	release_mem_region(zdev->resource.start, 0x100);
	iounmap(xs100->data_area);
	release_mem_region(zdev->resource.start + XS100_8390_DATA32_BASE,
	XS100_8390_DATA32_SIZE);
	}

	static const struct zorro_device_id xsurf100_zorro_tbl[] = {
	{ ZORRO_PROD_INDIVIDUAL_COMPUTERS_X_SURF100, },
	{ 0 }
	};

	MODULE_DEVICE_TABLE(zorro, xsurf100_zorro_tbl);

	static struct zorro_driver xsurf100_driver = {
	.name = "xsurf100",
	.id_table = xsurf100_zorro_tbl,
	.probe = xsurf100_probe,
	.remove = xsurf100_remove,
	};

	module_driver(xsurf100_driver, zorro_register_driver, zorro_unregister_driver);

	MODULE_DESCRIPTION("X-Surf 100 driver");
	MODULE_AUTHOR("Michael Karcher <kernel@mkarcher.dialup.fu-berlin.de>");
	MODULE_LICENSE("GPL v2");