| /* |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License version 2 as published |
| * by the Free Software Foundation. |
| * |
| * Copyright (C) 2010 John Crispin <john@phrozen.org> |
| */ |
| |
| #include <linux/types.h> |
| #include <linux/pci.h> |
| #include <linux/kernel.h> |
| #include <linux/init.h> |
| #include <linux/delay.h> |
| #include <linux/mm.h> |
| #include <linux/vmalloc.h> |
| #include <linux/clk.h> |
| #include <linux/of_platform.h> |
| #include <linux/of_gpio.h> |
| #include <linux/of_irq.h> |
| #include <linux/of_pci.h> |
| |
| #include <asm/addrspace.h> |
| |
| #include <lantiq_soc.h> |
| #include <lantiq_irq.h> |
| |
| #include "pci-lantiq.h" |
| |
| #define PCI_CR_FCI_ADDR_MAP0 0x00C0 |
| #define PCI_CR_FCI_ADDR_MAP1 0x00C4 |
| #define PCI_CR_FCI_ADDR_MAP2 0x00C8 |
| #define PCI_CR_FCI_ADDR_MAP3 0x00CC |
| #define PCI_CR_FCI_ADDR_MAP4 0x00D0 |
| #define PCI_CR_FCI_ADDR_MAP5 0x00D4 |
| #define PCI_CR_FCI_ADDR_MAP6 0x00D8 |
| #define PCI_CR_FCI_ADDR_MAP7 0x00DC |
| #define PCI_CR_CLK_CTRL 0x0000 |
| #define PCI_CR_PCI_MOD 0x0030 |
| #define PCI_CR_PC_ARB 0x0080 |
| #define PCI_CR_FCI_ADDR_MAP11hg 0x00E4 |
| #define PCI_CR_BAR11MASK 0x0044 |
| #define PCI_CR_BAR12MASK 0x0048 |
| #define PCI_CR_BAR13MASK 0x004C |
| #define PCI_CS_BASE_ADDR1 0x0010 |
| #define PCI_CR_PCI_ADDR_MAP11 0x0064 |
| #define PCI_CR_FCI_BURST_LENGTH 0x00E8 |
| #define PCI_CR_PCI_EOI 0x002C |
| #define PCI_CS_STS_CMD 0x0004 |
| |
| #define PCI_MASTER0_REQ_MASK_2BITS 8 |
| #define PCI_MASTER1_REQ_MASK_2BITS 10 |
| #define PCI_MASTER2_REQ_MASK_2BITS 12 |
| #define INTERNAL_ARB_ENABLE_BIT 0 |
| |
| #define LTQ_CGU_IFCCR 0x0018 |
| #define LTQ_CGU_PCICR 0x0034 |
| |
| #define ltq_pci_w32(x, y) ltq_w32((x), ltq_pci_membase + (y)) |
| #define ltq_pci_r32(x) ltq_r32(ltq_pci_membase + (x)) |
| |
| #define ltq_pci_cfg_w32(x, y) ltq_w32((x), ltq_pci_mapped_cfg + (y)) |
| #define ltq_pci_cfg_r32(x) ltq_r32(ltq_pci_mapped_cfg + (x)) |
| |
| __iomem void *ltq_pci_mapped_cfg; |
| static __iomem void *ltq_pci_membase; |
| |
| static int reset_gpio; |
| static struct clk *clk_pci, *clk_external; |
| static struct resource pci_io_resource; |
| static struct resource pci_mem_resource; |
| static struct pci_ops pci_ops = { |
| .read = ltq_pci_read_config_dword, |
| .write = ltq_pci_write_config_dword |
| }; |
| |
| static struct pci_controller pci_controller = { |
| .pci_ops = &pci_ops, |
| .mem_resource = &pci_mem_resource, |
| .mem_offset = 0x00000000UL, |
| .io_resource = &pci_io_resource, |
| .io_offset = 0x00000000UL, |
| }; |
| |
| static inline u32 ltq_calc_bar11mask(void) |
| { |
| u32 mem, bar11mask; |
| |
| /* BAR11MASK value depends on available memory on system. */ |
| mem = get_num_physpages() * PAGE_SIZE; |
| bar11mask = (0x0ffffff0 & ~((1 << (fls(mem) - 1)) - 1)) | 8; |
| |
| return bar11mask; |
| } |
| |
| static int ltq_pci_startup(struct platform_device *pdev) |
| { |
| struct device_node *node = pdev->dev.of_node; |
| const __be32 *req_mask, *bus_clk; |
| u32 temp_buffer; |
| |
| /* get our clocks */ |
| clk_pci = clk_get(&pdev->dev, NULL); |
| if (IS_ERR(clk_pci)) { |
| dev_err(&pdev->dev, "failed to get pci clock\n"); |
| return PTR_ERR(clk_pci); |
| } |
| |
| clk_external = clk_get(&pdev->dev, "external"); |
| if (IS_ERR(clk_external)) { |
| clk_put(clk_pci); |
| dev_err(&pdev->dev, "failed to get external pci clock\n"); |
| return PTR_ERR(clk_external); |
| } |
| |
| /* read the bus speed that we want */ |
| bus_clk = of_get_property(node, "lantiq,bus-clock", NULL); |
| if (bus_clk) |
| clk_set_rate(clk_pci, *bus_clk); |
| |
| /* and enable the clocks */ |
| clk_enable(clk_pci); |
| if (of_find_property(node, "lantiq,external-clock", NULL)) |
| clk_enable(clk_external); |
| else |
| clk_disable(clk_external); |
| |
| /* setup reset gpio used by pci */ |
| reset_gpio = of_get_named_gpio(node, "gpio-reset", 0); |
| if (gpio_is_valid(reset_gpio)) { |
| int ret = devm_gpio_request(&pdev->dev, |
| reset_gpio, "pci-reset"); |
| if (ret) { |
| dev_err(&pdev->dev, |
| "failed to request gpio %d\n", reset_gpio); |
| return ret; |
| } |
| gpio_direction_output(reset_gpio, 1); |
| } |
| |
| /* enable auto-switching between PCI and EBU */ |
| ltq_pci_w32(0xa, PCI_CR_CLK_CTRL); |
| |
| /* busy, i.e. configuration is not done, PCI access has to be retried */ |
| ltq_pci_w32(ltq_pci_r32(PCI_CR_PCI_MOD) & ~(1 << 24), PCI_CR_PCI_MOD); |
| wmb(); |
| /* BUS Master/IO/MEM access */ |
| ltq_pci_cfg_w32(ltq_pci_cfg_r32(PCI_CS_STS_CMD) | 7, PCI_CS_STS_CMD); |
| |
| /* enable external 2 PCI masters */ |
| temp_buffer = ltq_pci_r32(PCI_CR_PC_ARB); |
| /* setup the request mask */ |
| req_mask = of_get_property(node, "req-mask", NULL); |
| if (req_mask) |
| temp_buffer &= ~((*req_mask & 0xf) << 16); |
| else |
| temp_buffer &= ~0xf0000; |
| /* enable internal arbiter */ |
| temp_buffer |= (1 << INTERNAL_ARB_ENABLE_BIT); |
| /* enable internal PCI master reqest */ |
| temp_buffer &= (~(3 << PCI_MASTER0_REQ_MASK_2BITS)); |
| |
| /* enable EBU request */ |
| temp_buffer &= (~(3 << PCI_MASTER1_REQ_MASK_2BITS)); |
| |
| /* enable all external masters request */ |
| temp_buffer &= (~(3 << PCI_MASTER2_REQ_MASK_2BITS)); |
| ltq_pci_w32(temp_buffer, PCI_CR_PC_ARB); |
| wmb(); |
| |
| /* setup BAR memory regions */ |
| ltq_pci_w32(0x18000000, PCI_CR_FCI_ADDR_MAP0); |
| ltq_pci_w32(0x18400000, PCI_CR_FCI_ADDR_MAP1); |
| ltq_pci_w32(0x18800000, PCI_CR_FCI_ADDR_MAP2); |
| ltq_pci_w32(0x18c00000, PCI_CR_FCI_ADDR_MAP3); |
| ltq_pci_w32(0x19000000, PCI_CR_FCI_ADDR_MAP4); |
| ltq_pci_w32(0x19400000, PCI_CR_FCI_ADDR_MAP5); |
| ltq_pci_w32(0x19800000, PCI_CR_FCI_ADDR_MAP6); |
| ltq_pci_w32(0x19c00000, PCI_CR_FCI_ADDR_MAP7); |
| ltq_pci_w32(0x1ae00000, PCI_CR_FCI_ADDR_MAP11hg); |
| ltq_pci_w32(ltq_calc_bar11mask(), PCI_CR_BAR11MASK); |
| ltq_pci_w32(0, PCI_CR_PCI_ADDR_MAP11); |
| ltq_pci_w32(0, PCI_CS_BASE_ADDR1); |
| /* both TX and RX endian swap are enabled */ |
| ltq_pci_w32(ltq_pci_r32(PCI_CR_PCI_EOI) | 3, PCI_CR_PCI_EOI); |
| wmb(); |
| ltq_pci_w32(ltq_pci_r32(PCI_CR_BAR12MASK) | 0x80000000, |
| PCI_CR_BAR12MASK); |
| ltq_pci_w32(ltq_pci_r32(PCI_CR_BAR13MASK) | 0x80000000, |
| PCI_CR_BAR13MASK); |
| /*use 8 dw burst length */ |
| ltq_pci_w32(0x303, PCI_CR_FCI_BURST_LENGTH); |
| ltq_pci_w32(ltq_pci_r32(PCI_CR_PCI_MOD) | (1 << 24), PCI_CR_PCI_MOD); |
| wmb(); |
| |
| /* setup irq line */ |
| ltq_ebu_w32(ltq_ebu_r32(LTQ_EBU_PCC_CON) | 0xc, LTQ_EBU_PCC_CON); |
| ltq_ebu_w32(ltq_ebu_r32(LTQ_EBU_PCC_IEN) | 0x10, LTQ_EBU_PCC_IEN); |
| |
| /* toggle reset pin */ |
| if (gpio_is_valid(reset_gpio)) { |
| __gpio_set_value(reset_gpio, 0); |
| wmb(); |
| mdelay(1); |
| __gpio_set_value(reset_gpio, 1); |
| } |
| return 0; |
| } |
| |
| static int ltq_pci_probe(struct platform_device *pdev) |
| { |
| struct resource *res_cfg, *res_bridge; |
| |
| pci_clear_flags(PCI_PROBE_ONLY); |
| |
| res_bridge = platform_get_resource(pdev, IORESOURCE_MEM, 1); |
| ltq_pci_membase = devm_ioremap_resource(&pdev->dev, res_bridge); |
| if (IS_ERR(ltq_pci_membase)) |
| return PTR_ERR(ltq_pci_membase); |
| |
| res_cfg = platform_get_resource(pdev, IORESOURCE_MEM, 0); |
| ltq_pci_mapped_cfg = devm_ioremap_resource(&pdev->dev, res_cfg); |
| if (IS_ERR(ltq_pci_mapped_cfg)) |
| return PTR_ERR(ltq_pci_mapped_cfg); |
| |
| ltq_pci_startup(pdev); |
| |
| pci_load_of_ranges(&pci_controller, pdev->dev.of_node); |
| register_pci_controller(&pci_controller); |
| return 0; |
| } |
| |
| static const struct of_device_id ltq_pci_match[] = { |
| { .compatible = "lantiq,pci-xway" }, |
| {}, |
| }; |
| |
| static struct platform_driver ltq_pci_driver = { |
| .probe = ltq_pci_probe, |
| .driver = { |
| .name = "pci-xway", |
| .of_match_table = ltq_pci_match, |
| }, |
| }; |
| |
| int __init pcibios_init(void) |
| { |
| int ret = platform_driver_register(<q_pci_driver); |
| if (ret) |
| pr_info("pci-xway: Error registering platform driver!"); |
| return ret; |
| } |
| |
| arch_initcall(pcibios_init); |