| // SPDX-License-Identifier: GPL-2.0-or-later |
| /* |
| * Copyright (C) 2016 BayLibre, SAS |
| * Author: Neil Armstrong <narmstrong@baylibre.com> |
| * Copyright (C) 2015 Amlogic, Inc. All rights reserved. |
| * Copyright (C) 2014 Endless Mobile |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <drm/drmP.h> |
| #include "meson_drv.h" |
| #include "meson_vpp.h" |
| #include "meson_registers.h" |
| |
| /** |
| * DOC: Video Post Processing |
| * |
| * VPP Handles all the Post Processing after the Scanout from the VIU |
| * We handle the following post processings : |
| * |
| * - Postblend, Blends the OSD1 only |
| * We exclude OSD2, VS1, VS1 and Preblend output |
| * - Vertical OSD Scaler for OSD1 only, we disable vertical scaler and |
| * use it only for interlace scanout |
| * - Intermediate FIFO with default Amlogic values |
| * |
| * What is missing : |
| * |
| * - Preblend for video overlay pre-scaling |
| * - OSD2 support for cursor framebuffer |
| * - Video pre-scaling before postblend |
| * - Full Vertical/Horizontal OSD scaling to support TV overscan |
| * - HDR conversion |
| */ |
| |
| void meson_vpp_setup_mux(struct meson_drm *priv, unsigned int mux) |
| { |
| writel(mux, priv->io_base + _REG(VPU_VIU_VENC_MUX_CTRL)); |
| } |
| |
| static unsigned int vpp_filter_coefs_4point_bspline[] = { |
| 0x15561500, 0x14561600, 0x13561700, 0x12561800, |
| 0x11551a00, 0x11541b00, 0x10541c00, 0x0f541d00, |
| 0x0f531e00, 0x0e531f00, 0x0d522100, 0x0c522200, |
| 0x0b522300, 0x0b512400, 0x0a502600, 0x0a4f2700, |
| 0x094e2900, 0x084e2a00, 0x084d2b00, 0x074c2c01, |
| 0x074b2d01, 0x064a2f01, 0x06493001, 0x05483201, |
| 0x05473301, 0x05463401, 0x04453601, 0x04433702, |
| 0x04423802, 0x03413a02, 0x03403b02, 0x033f3c02, |
| 0x033d3d03 |
| }; |
| |
| static void meson_vpp_write_scaling_filter_coefs(struct meson_drm *priv, |
| const unsigned int *coefs, |
| bool is_horizontal) |
| { |
| int i; |
| |
| writel_relaxed(is_horizontal ? BIT(8) : 0, |
| priv->io_base + _REG(VPP_OSD_SCALE_COEF_IDX)); |
| for (i = 0; i < 33; i++) |
| writel_relaxed(coefs[i], |
| priv->io_base + _REG(VPP_OSD_SCALE_COEF)); |
| } |
| |
| static const uint32_t vpp_filter_coefs_bicubic[] = { |
| 0x00800000, 0x007f0100, 0xff7f0200, 0xfe7f0300, |
| 0xfd7e0500, 0xfc7e0600, 0xfb7d0800, 0xfb7c0900, |
| 0xfa7b0b00, 0xfa7a0dff, 0xf9790fff, 0xf97711ff, |
| 0xf87613ff, 0xf87416fe, 0xf87218fe, 0xf8701afe, |
| 0xf76f1dfd, 0xf76d1ffd, 0xf76b21fd, 0xf76824fd, |
| 0xf76627fc, 0xf76429fc, 0xf7612cfc, 0xf75f2ffb, |
| 0xf75d31fb, 0xf75a34fb, 0xf75837fa, 0xf7553afa, |
| 0xf8523cfa, 0xf8503ff9, 0xf84d42f9, 0xf84a45f9, |
| 0xf84848f8 |
| }; |
| |
| static void meson_vpp_write_vd_scaling_filter_coefs(struct meson_drm *priv, |
| const unsigned int *coefs, |
| bool is_horizontal) |
| { |
| int i; |
| |
| writel_relaxed(is_horizontal ? BIT(8) : 0, |
| priv->io_base + _REG(VPP_SCALE_COEF_IDX)); |
| for (i = 0; i < 33; i++) |
| writel_relaxed(coefs[i], |
| priv->io_base + _REG(VPP_SCALE_COEF)); |
| } |
| |
| void meson_vpp_init(struct meson_drm *priv) |
| { |
| /* set dummy data default YUV black */ |
| if (meson_vpu_is_compatible(priv, "amlogic,meson-gxl-vpu")) |
| writel_relaxed(0x108080, priv->io_base + _REG(VPP_DUMMY_DATA1)); |
| else if (meson_vpu_is_compatible(priv, "amlogic,meson-gxm-vpu")) { |
| writel_bits_relaxed(0xff << 16, 0xff << 16, |
| priv->io_base + _REG(VIU_MISC_CTRL1)); |
| writel_relaxed(0x20000, priv->io_base + _REG(VPP_DOLBY_CTRL)); |
| writel_relaxed(0x1020080, |
| priv->io_base + _REG(VPP_DUMMY_DATA1)); |
| } else if (meson_vpu_is_compatible(priv, "amlogic,meson-g12a-vpu")) |
| writel_relaxed(0xf, priv->io_base + _REG(DOLBY_PATH_CTRL)); |
| |
| /* Initialize vpu fifo control registers */ |
| if (meson_vpu_is_compatible(priv, "amlogic,meson-g12a-vpu")) |
| writel_relaxed(0xfff << 20 | 0x1000, |
| priv->io_base + _REG(VPP_OFIFO_SIZE)); |
| else |
| writel_relaxed(readl_relaxed(priv->io_base + _REG(VPP_OFIFO_SIZE)) | |
| 0x77f, priv->io_base + _REG(VPP_OFIFO_SIZE)); |
| writel_relaxed(0x08080808, priv->io_base + _REG(VPP_HOLD_LINES)); |
| |
| if (!meson_vpu_is_compatible(priv, "amlogic,meson-g12a-vpu")) { |
| /* Turn off preblend */ |
| writel_bits_relaxed(VPP_PREBLEND_ENABLE, 0, |
| priv->io_base + _REG(VPP_MISC)); |
| |
| /* Turn off POSTBLEND */ |
| writel_bits_relaxed(VPP_POSTBLEND_ENABLE, 0, |
| priv->io_base + _REG(VPP_MISC)); |
| |
| /* Force all planes off */ |
| writel_bits_relaxed(VPP_OSD1_POSTBLEND | VPP_OSD2_POSTBLEND | |
| VPP_VD1_POSTBLEND | VPP_VD2_POSTBLEND | |
| VPP_VD1_PREBLEND | VPP_VD2_PREBLEND, 0, |
| priv->io_base + _REG(VPP_MISC)); |
| |
| /* Setup default VD settings */ |
| writel_relaxed(4096, |
| priv->io_base + _REG(VPP_PREBLEND_VD1_H_START_END)); |
| writel_relaxed(4096, |
| priv->io_base + _REG(VPP_BLEND_VD2_H_START_END)); |
| } |
| |
| /* Disable Scalers */ |
| writel_relaxed(0, priv->io_base + _REG(VPP_OSD_SC_CTRL0)); |
| writel_relaxed(0, priv->io_base + _REG(VPP_OSD_VSC_CTRL0)); |
| writel_relaxed(0, priv->io_base + _REG(VPP_OSD_HSC_CTRL0)); |
| writel_relaxed(4 | (4 << 8) | BIT(15), |
| priv->io_base + _REG(VPP_SC_MISC)); |
| |
| writel_relaxed(1, priv->io_base + _REG(VPP_VADJ_CTRL)); |
| |
| /* Write in the proper filter coefficients. */ |
| meson_vpp_write_scaling_filter_coefs(priv, |
| vpp_filter_coefs_4point_bspline, false); |
| meson_vpp_write_scaling_filter_coefs(priv, |
| vpp_filter_coefs_4point_bspline, true); |
| |
| /* Write the VD proper filter coefficients. */ |
| meson_vpp_write_vd_scaling_filter_coefs(priv, vpp_filter_coefs_bicubic, |
| false); |
| meson_vpp_write_vd_scaling_filter_coefs(priv, vpp_filter_coefs_bicubic, |
| true); |
| } |