| /* | |
| * fixed.c | |
| * | |
| * Copyright 2008 Wolfson Microelectronics PLC. | |
| * | |
| * Author: Mark Brown <broonie@opensource.wolfsonmicro.com> | |
| * | |
| * Copyright (c) 2009 Nokia Corporation | |
| * Roger Quadros <ext-roger.quadros@nokia.com> | |
| * | |
| * This program is free software; you can redistribute it and/or | |
| * modify it under the terms of the GNU General Public License as | |
| * published by the Free Software Foundation; either version 2 of the | |
| * License, or (at your option) any later version. | |
| * | |
| * This is useful for systems with mixed controllable and | |
| * non-controllable regulators, as well as for allowing testing on | |
| * systems with no controllable regulators. | |
| */ | |
| #include <linux/err.h> | |
| #include <linux/mutex.h> | |
| #include <linux/platform_device.h> | |
| #include <linux/regulator/driver.h> | |
| #include <linux/regulator/fixed.h> | |
| #include <linux/gpio.h> | |
| #include <linux/delay.h> | |
| #include <linux/slab.h> | |
| struct fixed_voltage_data { | |
| struct regulator_desc desc; | |
| struct regulator_dev *dev; | |
| int microvolts; | |
| int gpio; | |
| unsigned startup_delay; | |
| bool enable_high; | |
| bool is_enabled; | |
| }; | |
| static int fixed_voltage_is_enabled(struct regulator_dev *dev) | |
| { | |
| struct fixed_voltage_data *data = rdev_get_drvdata(dev); | |
| return data->is_enabled; | |
| } | |
| static int fixed_voltage_enable(struct regulator_dev *dev) | |
| { | |
| struct fixed_voltage_data *data = rdev_get_drvdata(dev); | |
| if (gpio_is_valid(data->gpio)) { | |
| gpio_set_value_cansleep(data->gpio, data->enable_high); | |
| data->is_enabled = true; | |
| } | |
| return 0; | |
| } | |
| static int fixed_voltage_disable(struct regulator_dev *dev) | |
| { | |
| struct fixed_voltage_data *data = rdev_get_drvdata(dev); | |
| if (gpio_is_valid(data->gpio)) { | |
| gpio_set_value_cansleep(data->gpio, !data->enable_high); | |
| data->is_enabled = false; | |
| } | |
| return 0; | |
| } | |
| static int fixed_voltage_enable_time(struct regulator_dev *dev) | |
| { | |
| struct fixed_voltage_data *data = rdev_get_drvdata(dev); | |
| return data->startup_delay; | |
| } | |
| static int fixed_voltage_get_voltage(struct regulator_dev *dev) | |
| { | |
| struct fixed_voltage_data *data = rdev_get_drvdata(dev); | |
| return data->microvolts; | |
| } | |
| static int fixed_voltage_list_voltage(struct regulator_dev *dev, | |
| unsigned selector) | |
| { | |
| struct fixed_voltage_data *data = rdev_get_drvdata(dev); | |
| if (selector != 0) | |
| return -EINVAL; | |
| return data->microvolts; | |
| } | |
| static struct regulator_ops fixed_voltage_ops = { | |
| .is_enabled = fixed_voltage_is_enabled, | |
| .enable = fixed_voltage_enable, | |
| .disable = fixed_voltage_disable, | |
| .enable_time = fixed_voltage_enable_time, | |
| .get_voltage = fixed_voltage_get_voltage, | |
| .list_voltage = fixed_voltage_list_voltage, | |
| }; | |
| static int __devinit reg_fixed_voltage_probe(struct platform_device *pdev) | |
| { | |
| struct fixed_voltage_config *config = pdev->dev.platform_data; | |
| struct fixed_voltage_data *drvdata; | |
| int ret; | |
| drvdata = kzalloc(sizeof(struct fixed_voltage_data), GFP_KERNEL); | |
| if (drvdata == NULL) { | |
| dev_err(&pdev->dev, "Failed to allocate device data\n"); | |
| ret = -ENOMEM; | |
| goto err; | |
| } | |
| drvdata->desc.name = kstrdup(config->supply_name, GFP_KERNEL); | |
| if (drvdata->desc.name == NULL) { | |
| dev_err(&pdev->dev, "Failed to allocate supply name\n"); | |
| ret = -ENOMEM; | |
| goto err; | |
| } | |
| drvdata->desc.type = REGULATOR_VOLTAGE; | |
| drvdata->desc.owner = THIS_MODULE; | |
| drvdata->desc.ops = &fixed_voltage_ops; | |
| drvdata->desc.n_voltages = 1; | |
| drvdata->microvolts = config->microvolts; | |
| drvdata->gpio = config->gpio; | |
| drvdata->startup_delay = config->startup_delay; | |
| if (gpio_is_valid(config->gpio)) { | |
| drvdata->enable_high = config->enable_high; | |
| /* FIXME: Remove below print warning | |
| * | |
| * config->gpio must be set to -EINVAL by platform code if | |
| * GPIO control is not required. However, early adopters | |
| * not requiring GPIO control may forget to initialize | |
| * config->gpio to -EINVAL. This will cause GPIO 0 to be used | |
| * for GPIO control. | |
| * | |
| * This warning will be removed once there are a couple of users | |
| * for this driver. | |
| */ | |
| if (!config->gpio) | |
| dev_warn(&pdev->dev, | |
| "using GPIO 0 for regulator enable control\n"); | |
| ret = gpio_request(config->gpio, config->supply_name); | |
| if (ret) { | |
| dev_err(&pdev->dev, | |
| "Could not obtain regulator enable GPIO %d: %d\n", | |
| config->gpio, ret); | |
| goto err_name; | |
| } | |
| /* set output direction without changing state | |
| * to prevent glitch | |
| */ | |
| drvdata->is_enabled = config->enabled_at_boot; | |
| ret = drvdata->is_enabled ? | |
| config->enable_high : !config->enable_high; | |
| ret = gpio_direction_output(config->gpio, ret); | |
| if (ret) { | |
| dev_err(&pdev->dev, | |
| "Could not configure regulator enable GPIO %d direction: %d\n", | |
| config->gpio, ret); | |
| goto err_gpio; | |
| } | |
| } else { | |
| /* Regulator without GPIO control is considered | |
| * always enabled | |
| */ | |
| drvdata->is_enabled = true; | |
| } | |
| drvdata->dev = regulator_register(&drvdata->desc, &pdev->dev, | |
| config->init_data, drvdata); | |
| if (IS_ERR(drvdata->dev)) { | |
| ret = PTR_ERR(drvdata->dev); | |
| dev_err(&pdev->dev, "Failed to register regulator: %d\n", ret); | |
| goto err_gpio; | |
| } | |
| platform_set_drvdata(pdev, drvdata); | |
| dev_dbg(&pdev->dev, "%s supplying %duV\n", drvdata->desc.name, | |
| drvdata->microvolts); | |
| return 0; | |
| err_gpio: | |
| if (gpio_is_valid(config->gpio)) | |
| gpio_free(config->gpio); | |
| err_name: | |
| kfree(drvdata->desc.name); | |
| err: | |
| kfree(drvdata); | |
| return ret; | |
| } | |
| static int __devexit reg_fixed_voltage_remove(struct platform_device *pdev) | |
| { | |
| struct fixed_voltage_data *drvdata = platform_get_drvdata(pdev); | |
| regulator_unregister(drvdata->dev); | |
| if (gpio_is_valid(drvdata->gpio)) | |
| gpio_free(drvdata->gpio); | |
| kfree(drvdata->desc.name); | |
| kfree(drvdata); | |
| return 0; | |
| } | |
| static struct platform_driver regulator_fixed_voltage_driver = { | |
| .probe = reg_fixed_voltage_probe, | |
| .remove = __devexit_p(reg_fixed_voltage_remove), | |
| .driver = { | |
| .name = "reg-fixed-voltage", | |
| .owner = THIS_MODULE, | |
| }, | |
| }; | |
| static int __init regulator_fixed_voltage_init(void) | |
| { | |
| return platform_driver_register(®ulator_fixed_voltage_driver); | |
| } | |
| subsys_initcall(regulator_fixed_voltage_init); | |
| static void __exit regulator_fixed_voltage_exit(void) | |
| { | |
| platform_driver_unregister(®ulator_fixed_voltage_driver); | |
| } | |
| module_exit(regulator_fixed_voltage_exit); | |
| MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>"); | |
| MODULE_DESCRIPTION("Fixed voltage regulator"); | |
| MODULE_LICENSE("GPL"); | |
| MODULE_ALIAS("platform:reg-fixed-voltage"); |