| /* |
| * (C) 2004-2009 Dominik Brodowski <linux@dominikbrodowski.de> |
| * |
| * Licensed under the terms of the GNU GPL License version 2. |
| */ |
| |
| |
| #include <unistd.h> |
| #include <stdio.h> |
| #include <errno.h> |
| #include <stdlib.h> |
| #include <string.h> |
| #include <limits.h> |
| |
| #include <getopt.h> |
| |
| #include "cpufreq.h" |
| #include "helpers/sysfs.h" |
| #include "helpers/helpers.h" |
| #include "helpers/bitmask.h" |
| |
| #define LINE_LEN 10 |
| |
| static unsigned int count_cpus(void) |
| { |
| FILE *fp; |
| char value[LINE_LEN]; |
| unsigned int ret = 0; |
| unsigned int cpunr = 0; |
| |
| fp = fopen("/proc/stat", "r"); |
| if (!fp) { |
| printf(_("Couldn't count the number of CPUs (%s: %s), assuming 1\n"), "/proc/stat", strerror(errno)); |
| return 1; |
| } |
| |
| while (!feof(fp)) { |
| if (!fgets(value, LINE_LEN, fp)) |
| continue; |
| value[LINE_LEN - 1] = '\0'; |
| if (strlen(value) < (LINE_LEN - 2)) |
| continue; |
| if (strstr(value, "cpu ")) |
| continue; |
| if (sscanf(value, "cpu%d ", &cpunr) != 1) |
| continue; |
| if (cpunr > ret) |
| ret = cpunr; |
| } |
| fclose(fp); |
| |
| /* cpu count starts from 0, on error return 1 (UP) */ |
| return ret + 1; |
| } |
| |
| |
| static void proc_cpufreq_output(void) |
| { |
| unsigned int cpu, nr_cpus; |
| struct cpufreq_policy *policy; |
| unsigned int min_pctg = 0; |
| unsigned int max_pctg = 0; |
| unsigned long min, max; |
| |
| printf(_(" minimum CPU frequency - maximum CPU frequency - governor\n")); |
| |
| nr_cpus = count_cpus(); |
| for (cpu = 0; cpu < nr_cpus; cpu++) { |
| policy = cpufreq_get_policy(cpu); |
| if (!policy) |
| continue; |
| |
| if (cpufreq_get_hardware_limits(cpu, &min, &max)) { |
| max = 0; |
| } else { |
| min_pctg = (policy->min * 100) / max; |
| max_pctg = (policy->max * 100) / max; |
| } |
| printf("CPU%3d %9lu kHz (%3d %%) - %9lu kHz (%3d %%) - %s\n", |
| cpu , policy->min, max ? min_pctg : 0, policy->max, |
| max ? max_pctg : 0, policy->governor); |
| |
| cpufreq_put_policy(policy); |
| } |
| } |
| |
| static int no_rounding; |
| static void print_speed(unsigned long speed) |
| { |
| unsigned long tmp; |
| |
| if (no_rounding) { |
| if (speed > 1000000) |
| printf("%u.%06u GHz", ((unsigned int) speed/1000000), |
| ((unsigned int) speed%1000000)); |
| else if (speed > 1000) |
| printf("%u.%03u MHz", ((unsigned int) speed/1000), |
| (unsigned int) (speed%1000)); |
| else |
| printf("%lu kHz", speed); |
| } else { |
| if (speed > 1000000) { |
| tmp = speed%10000; |
| if (tmp >= 5000) |
| speed += 10000; |
| printf("%u.%02u GHz", ((unsigned int) speed/1000000), |
| ((unsigned int) (speed%1000000)/10000)); |
| } else if (speed > 100000) { |
| tmp = speed%1000; |
| if (tmp >= 500) |
| speed += 1000; |
| printf("%u MHz", ((unsigned int) speed/1000)); |
| } else if (speed > 1000) { |
| tmp = speed%100; |
| if (tmp >= 50) |
| speed += 100; |
| printf("%u.%01u MHz", ((unsigned int) speed/1000), |
| ((unsigned int) (speed%1000)/100)); |
| } |
| } |
| |
| return; |
| } |
| |
| static void print_duration(unsigned long duration) |
| { |
| unsigned long tmp; |
| |
| if (no_rounding) { |
| if (duration > 1000000) |
| printf("%u.%06u ms", ((unsigned int) duration/1000000), |
| ((unsigned int) duration%1000000)); |
| else if (duration > 100000) |
| printf("%u us", ((unsigned int) duration/1000)); |
| else if (duration > 1000) |
| printf("%u.%03u us", ((unsigned int) duration/1000), |
| ((unsigned int) duration%1000)); |
| else |
| printf("%lu ns", duration); |
| } else { |
| if (duration > 1000000) { |
| tmp = duration%10000; |
| if (tmp >= 5000) |
| duration += 10000; |
| printf("%u.%02u ms", ((unsigned int) duration/1000000), |
| ((unsigned int) (duration%1000000)/10000)); |
| } else if (duration > 100000) { |
| tmp = duration%1000; |
| if (tmp >= 500) |
| duration += 1000; |
| printf("%u us", ((unsigned int) duration / 1000)); |
| } else if (duration > 1000) { |
| tmp = duration%100; |
| if (tmp >= 50) |
| duration += 100; |
| printf("%u.%01u us", ((unsigned int) duration/1000), |
| ((unsigned int) (duration%1000)/100)); |
| } else |
| printf("%lu ns", duration); |
| } |
| return; |
| } |
| |
| /* --boost / -b */ |
| |
| static int get_boost_mode(unsigned int cpu) |
| { |
| int support, active, b_states = 0, ret, pstate_no, i; |
| /* ToDo: Make this more global */ |
| unsigned long pstates[MAX_HW_PSTATES] = {0,}; |
| |
| if (cpupower_cpu_info.vendor != X86_VENDOR_AMD && |
| cpupower_cpu_info.vendor != X86_VENDOR_INTEL) |
| return 0; |
| |
| ret = cpufreq_has_boost_support(cpu, &support, &active, &b_states); |
| if (ret) { |
| printf(_("Error while evaluating Boost Capabilities" |
| " on CPU %d -- are you root?\n"), cpu); |
| return ret; |
| } |
| /* P state changes via MSR are identified via cpuid 80000007 |
| on Intel and AMD, but we assume boost capable machines can do that |
| if (cpuid_eax(0x80000000) >= 0x80000007 |
| && (cpuid_edx(0x80000007) & (1 << 7))) |
| */ |
| |
| printf(_(" boost state support:\n")); |
| |
| printf(_(" Supported: %s\n"), support ? _("yes") : _("no")); |
| printf(_(" Active: %s\n"), active ? _("yes") : _("no")); |
| |
| if (cpupower_cpu_info.vendor == X86_VENDOR_AMD && |
| cpupower_cpu_info.family >= 0x10) { |
| ret = decode_pstates(cpu, cpupower_cpu_info.family, b_states, |
| pstates, &pstate_no); |
| if (ret) |
| return ret; |
| |
| printf(_(" Boost States: %d\n"), b_states); |
| printf(_(" Total States: %d\n"), pstate_no); |
| for (i = 0; i < pstate_no; i++) { |
| if (i < b_states) |
| printf(_(" Pstate-Pb%d: %luMHz (boost state)" |
| "\n"), i, pstates[i]); |
| else |
| printf(_(" Pstate-P%d: %luMHz\n"), |
| i - b_states, pstates[i]); |
| } |
| } else if (cpupower_cpu_info.caps & CPUPOWER_CAP_HAS_TURBO_RATIO) { |
| double bclk; |
| unsigned long long intel_turbo_ratio = 0; |
| unsigned int ratio; |
| |
| /* Any way to autodetect this ? */ |
| if (cpupower_cpu_info.caps & CPUPOWER_CAP_IS_SNB) |
| bclk = 100.00; |
| else |
| bclk = 133.33; |
| intel_turbo_ratio = msr_intel_get_turbo_ratio(cpu); |
| dprint (" Ratio: 0x%llx - bclk: %f\n", |
| intel_turbo_ratio, bclk); |
| |
| ratio = (intel_turbo_ratio >> 24) & 0xFF; |
| if (ratio) |
| printf(_(" %.0f MHz max turbo 4 active cores\n"), |
| ratio * bclk); |
| |
| ratio = (intel_turbo_ratio >> 16) & 0xFF; |
| if (ratio) |
| printf(_(" %.0f MHz max turbo 3 active cores\n"), |
| ratio * bclk); |
| |
| ratio = (intel_turbo_ratio >> 8) & 0xFF; |
| if (ratio) |
| printf(_(" %.0f MHz max turbo 2 active cores\n"), |
| ratio * bclk); |
| |
| ratio = (intel_turbo_ratio >> 0) & 0xFF; |
| if (ratio) |
| printf(_(" %.0f MHz max turbo 1 active cores\n"), |
| ratio * bclk); |
| } |
| return 0; |
| } |
| |
| /* --freq / -f */ |
| |
| static int get_freq_kernel(unsigned int cpu, unsigned int human) |
| { |
| unsigned long freq = cpufreq_get_freq_kernel(cpu); |
| printf(_(" current CPU frequency: ")); |
| if (!freq) { |
| printf(_(" Unable to call to kernel\n")); |
| return -EINVAL; |
| } |
| if (human) { |
| print_speed(freq); |
| } else |
| printf("%lu", freq); |
| printf(_(" (asserted by call to kernel)\n")); |
| return 0; |
| } |
| |
| |
| /* --hwfreq / -w */ |
| |
| static int get_freq_hardware(unsigned int cpu, unsigned int human) |
| { |
| unsigned long freq = cpufreq_get_freq_hardware(cpu); |
| printf(_(" current CPU frequency: ")); |
| if (!freq) { |
| printf("Unable to call hardware\n"); |
| return -EINVAL; |
| } |
| if (human) { |
| print_speed(freq); |
| } else |
| printf("%lu", freq); |
| printf(_(" (asserted by call to hardware)\n")); |
| return 0; |
| } |
| |
| /* --hwlimits / -l */ |
| |
| static int get_hardware_limits(unsigned int cpu, unsigned int human) |
| { |
| unsigned long min, max; |
| |
| if (cpufreq_get_hardware_limits(cpu, &min, &max)) { |
| printf(_("Not Available\n")); |
| return -EINVAL; |
| } |
| |
| if (human) { |
| printf(_(" hardware limits: ")); |
| print_speed(min); |
| printf(" - "); |
| print_speed(max); |
| printf("\n"); |
| } else { |
| printf("%lu %lu\n", min, max); |
| } |
| return 0; |
| } |
| |
| /* --driver / -d */ |
| |
| static int get_driver(unsigned int cpu) |
| { |
| char *driver = cpufreq_get_driver(cpu); |
| if (!driver) { |
| printf(_(" no or unknown cpufreq driver is active on this CPU\n")); |
| return -EINVAL; |
| } |
| printf(" driver: %s\n", driver); |
| cpufreq_put_driver(driver); |
| return 0; |
| } |
| |
| /* --policy / -p */ |
| |
| static int get_policy(unsigned int cpu) |
| { |
| struct cpufreq_policy *policy = cpufreq_get_policy(cpu); |
| if (!policy) { |
| printf(_(" Unable to determine current policy\n")); |
| return -EINVAL; |
| } |
| printf(_(" current policy: frequency should be within ")); |
| print_speed(policy->min); |
| printf(_(" and ")); |
| print_speed(policy->max); |
| |
| printf(".\n "); |
| printf(_("The governor \"%s\" may decide which speed to use\n" |
| " within this range.\n"), |
| policy->governor); |
| cpufreq_put_policy(policy); |
| return 0; |
| } |
| |
| /* --governors / -g */ |
| |
| static int get_available_governors(unsigned int cpu) |
| { |
| struct cpufreq_available_governors *governors = |
| cpufreq_get_available_governors(cpu); |
| |
| printf(_(" available cpufreq governors: ")); |
| if (!governors) { |
| printf(_("Not Available\n")); |
| return -EINVAL; |
| } |
| |
| while (governors->next) { |
| printf("%s ", governors->governor); |
| governors = governors->next; |
| } |
| printf("%s\n", governors->governor); |
| cpufreq_put_available_governors(governors); |
| return 0; |
| } |
| |
| |
| /* --affected-cpus / -a */ |
| |
| static int get_affected_cpus(unsigned int cpu) |
| { |
| struct cpufreq_affected_cpus *cpus = cpufreq_get_affected_cpus(cpu); |
| |
| printf(_(" CPUs which need to have their frequency coordinated by software: ")); |
| if (!cpus) { |
| printf(_("Not Available\n")); |
| return -EINVAL; |
| } |
| |
| while (cpus->next) { |
| printf("%d ", cpus->cpu); |
| cpus = cpus->next; |
| } |
| printf("%d\n", cpus->cpu); |
| cpufreq_put_affected_cpus(cpus); |
| return 0; |
| } |
| |
| /* --related-cpus / -r */ |
| |
| static int get_related_cpus(unsigned int cpu) |
| { |
| struct cpufreq_affected_cpus *cpus = cpufreq_get_related_cpus(cpu); |
| |
| printf(_(" CPUs which run at the same hardware frequency: ")); |
| if (!cpus) { |
| printf(_("Not Available\n")); |
| return -EINVAL; |
| } |
| |
| while (cpus->next) { |
| printf("%d ", cpus->cpu); |
| cpus = cpus->next; |
| } |
| printf("%d\n", cpus->cpu); |
| cpufreq_put_related_cpus(cpus); |
| return 0; |
| } |
| |
| /* --stats / -s */ |
| |
| static int get_freq_stats(unsigned int cpu, unsigned int human) |
| { |
| unsigned long total_trans = cpufreq_get_transitions(cpu); |
| unsigned long long total_time; |
| struct cpufreq_stats *stats = cpufreq_get_stats(cpu, &total_time); |
| while (stats) { |
| if (human) { |
| print_speed(stats->frequency); |
| printf(":%.2f%%", |
| (100.0 * stats->time_in_state) / total_time); |
| } else |
| printf("%lu:%llu", |
| stats->frequency, stats->time_in_state); |
| stats = stats->next; |
| if (stats) |
| printf(", "); |
| } |
| cpufreq_put_stats(stats); |
| if (total_trans) |
| printf(" (%lu)\n", total_trans); |
| return 0; |
| } |
| |
| /* --latency / -y */ |
| |
| static int get_latency(unsigned int cpu, unsigned int human) |
| { |
| unsigned long latency = cpufreq_get_transition_latency(cpu); |
| |
| printf(_(" maximum transition latency: ")); |
| if (!latency || latency == UINT_MAX) { |
| printf(_(" Cannot determine or is not supported.\n")); |
| return -EINVAL; |
| } |
| |
| if (human) { |
| print_duration(latency); |
| printf("\n"); |
| } else |
| printf("%lu\n", latency); |
| return 0; |
| } |
| |
| static void debug_output_one(unsigned int cpu) |
| { |
| struct cpufreq_available_frequencies *freqs; |
| |
| get_driver(cpu); |
| get_related_cpus(cpu); |
| get_affected_cpus(cpu); |
| get_latency(cpu, 1); |
| get_hardware_limits(cpu, 1); |
| |
| freqs = cpufreq_get_available_frequencies(cpu); |
| if (freqs) { |
| printf(_(" available frequency steps: ")); |
| while (freqs->next) { |
| print_speed(freqs->frequency); |
| printf(", "); |
| freqs = freqs->next; |
| } |
| print_speed(freqs->frequency); |
| printf("\n"); |
| cpufreq_put_available_frequencies(freqs); |
| } |
| |
| get_available_governors(cpu); |
| get_policy(cpu); |
| if (get_freq_hardware(cpu, 1) < 0) |
| get_freq_kernel(cpu, 1); |
| get_boost_mode(cpu); |
| } |
| |
| static struct option info_opts[] = { |
| {"debug", no_argument, NULL, 'e'}, |
| {"boost", no_argument, NULL, 'b'}, |
| {"freq", no_argument, NULL, 'f'}, |
| {"hwfreq", no_argument, NULL, 'w'}, |
| {"hwlimits", no_argument, NULL, 'l'}, |
| {"driver", no_argument, NULL, 'd'}, |
| {"policy", no_argument, NULL, 'p'}, |
| {"governors", no_argument, NULL, 'g'}, |
| {"related-cpus", no_argument, NULL, 'r'}, |
| {"affected-cpus", no_argument, NULL, 'a'}, |
| {"stats", no_argument, NULL, 's'}, |
| {"latency", no_argument, NULL, 'y'}, |
| {"proc", no_argument, NULL, 'o'}, |
| {"human", no_argument, NULL, 'm'}, |
| {"no-rounding", no_argument, NULL, 'n'}, |
| { }, |
| }; |
| |
| int cmd_freq_info(int argc, char **argv) |
| { |
| extern char *optarg; |
| extern int optind, opterr, optopt; |
| int ret = 0, cont = 1; |
| unsigned int cpu = 0; |
| unsigned int human = 0; |
| int output_param = 0; |
| |
| do { |
| ret = getopt_long(argc, argv, "oefwldpgrasmybn", info_opts, |
| NULL); |
| switch (ret) { |
| case '?': |
| output_param = '?'; |
| cont = 0; |
| break; |
| case -1: |
| cont = 0; |
| break; |
| case 'b': |
| case 'o': |
| case 'a': |
| case 'r': |
| case 'g': |
| case 'p': |
| case 'd': |
| case 'l': |
| case 'w': |
| case 'f': |
| case 'e': |
| case 's': |
| case 'y': |
| if (output_param) { |
| output_param = -1; |
| cont = 0; |
| break; |
| } |
| output_param = ret; |
| break; |
| case 'm': |
| if (human) { |
| output_param = -1; |
| cont = 0; |
| break; |
| } |
| human = 1; |
| break; |
| case 'n': |
| no_rounding = 1; |
| break; |
| default: |
| fprintf(stderr, "invalid or unknown argument\n"); |
| return EXIT_FAILURE; |
| } |
| } while (cont); |
| |
| switch (output_param) { |
| case 'o': |
| if (!bitmask_isallclear(cpus_chosen)) { |
| printf(_("The argument passed to this tool can't be " |
| "combined with passing a --cpu argument\n")); |
| return -EINVAL; |
| } |
| break; |
| case 0: |
| output_param = 'e'; |
| } |
| |
| ret = 0; |
| |
| /* Default is: show output of CPU 0 only */ |
| if (bitmask_isallclear(cpus_chosen)) |
| bitmask_setbit(cpus_chosen, 0); |
| |
| switch (output_param) { |
| case -1: |
| printf(_("You can't specify more than one --cpu parameter and/or\n" |
| "more than one output-specific argument\n")); |
| return -EINVAL; |
| case '?': |
| printf(_("invalid or unknown argument\n")); |
| return -EINVAL; |
| case 'o': |
| proc_cpufreq_output(); |
| return EXIT_SUCCESS; |
| } |
| |
| for (cpu = bitmask_first(cpus_chosen); |
| cpu <= bitmask_last(cpus_chosen); cpu++) { |
| |
| if (!bitmask_isbitset(cpus_chosen, cpu)) |
| continue; |
| |
| printf(_("analyzing CPU %d:\n"), cpu); |
| |
| if (sysfs_is_cpu_online(cpu) != 1) { |
| printf(_(" *is offline\n")); |
| printf("\n"); |
| continue; |
| } |
| |
| switch (output_param) { |
| case 'b': |
| get_boost_mode(cpu); |
| break; |
| case 'e': |
| debug_output_one(cpu); |
| break; |
| case 'a': |
| ret = get_affected_cpus(cpu); |
| break; |
| case 'r': |
| ret = get_related_cpus(cpu); |
| break; |
| case 'g': |
| ret = get_available_governors(cpu); |
| break; |
| case 'p': |
| ret = get_policy(cpu); |
| break; |
| case 'd': |
| ret = get_driver(cpu); |
| break; |
| case 'l': |
| ret = get_hardware_limits(cpu, human); |
| break; |
| case 'w': |
| ret = get_freq_hardware(cpu, human); |
| break; |
| case 'f': |
| ret = get_freq_kernel(cpu, human); |
| break; |
| case 's': |
| ret = get_freq_stats(cpu, human); |
| break; |
| case 'y': |
| ret = get_latency(cpu, human); |
| break; |
| } |
| if (ret) |
| return ret; |
| } |
| return ret; |
| } |