| /* DVB USB compliant linux driver for Conexant USB reference design. | 
 |  * | 
 |  * The Conexant reference design I saw on their website was only for analogue | 
 |  * capturing (using the cx25842). The box I took to write this driver (reverse | 
 |  * engineered) is the one labeled Medion MD95700. In addition to the cx25842 | 
 |  * for analogue capturing it also has a cx22702 DVB-T demodulator on the main | 
 |  * board. Besides it has a atiremote (X10) and a USB2.0 hub onboard. | 
 |  * | 
 |  * Maybe it is a little bit premature to call this driver cxusb, but I assume | 
 |  * the USB protocol is identical or at least inherited from the reference | 
 |  * design, so it can be reused for the "analogue-only" device (if it will | 
 |  * appear at all). | 
 |  * | 
 |  * TODO: Use the cx25840-driver for the analogue part | 
 |  * | 
 |  * Copyright (C) 2005 Patrick Boettcher (patrick.boettcher@desy.de) | 
 |  * Copyright (C) 2005 Michael Krufky (mkrufky@m1k.net) | 
 |  * Copyright (C) 2006 Chris Pascoe (c.pascoe@itee.uq.edu.au) | 
 |  * | 
 |  *	This program is free software; you can redistribute it and/or modify it | 
 |  *	under the terms of the GNU General Public License as published by the Free | 
 |  *	Software Foundation, version 2. | 
 |  * | 
 |  * see Documentation/dvb/README.dvb-usb for more information | 
 |  */ | 
 | #include "cxusb.h" | 
 |  | 
 | #include "cx22702.h" | 
 | #include "lgdt330x.h" | 
 | #include "mt352.h" | 
 | #include "mt352_priv.h" | 
 |  | 
 | /* debug */ | 
 | int dvb_usb_cxusb_debug; | 
 | module_param_named(debug,dvb_usb_cxusb_debug, int, 0644); | 
 | MODULE_PARM_DESC(debug, "set debugging level (1=rc (or-able))." DVB_USB_DEBUG_STATUS); | 
 |  | 
 | static int cxusb_ctrl_msg(struct dvb_usb_device *d, | 
 | 		u8 cmd, u8 *wbuf, int wlen, u8 *rbuf, int rlen) | 
 | { | 
 | 	int wo = (rbuf == NULL || rlen == 0); /* write-only */ | 
 | 	u8 sndbuf[1+wlen]; | 
 | 	memset(sndbuf,0,1+wlen); | 
 |  | 
 | 	sndbuf[0] = cmd; | 
 | 	memcpy(&sndbuf[1],wbuf,wlen); | 
 | 	if (wo) | 
 | 		dvb_usb_generic_write(d,sndbuf,1+wlen); | 
 | 	else | 
 | 		dvb_usb_generic_rw(d,sndbuf,1+wlen,rbuf,rlen,0); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | /* GPIO */ | 
 | static void cxusb_gpio_tuner(struct dvb_usb_device *d, int onoff) | 
 | { | 
 | 	struct cxusb_state *st = d->priv; | 
 | 	u8 o[2],i; | 
 |  | 
 | 	if (st->gpio_write_state[GPIO_TUNER] == onoff) | 
 | 		return; | 
 |  | 
 | 	o[0] = GPIO_TUNER; | 
 | 	o[1] = onoff; | 
 | 	cxusb_ctrl_msg(d,CMD_GPIO_WRITE,o,2,&i,1); | 
 |  | 
 | 	if (i != 0x01) | 
 | 		deb_info("gpio_write failed.\n"); | 
 |  | 
 | 	st->gpio_write_state[GPIO_TUNER] = onoff; | 
 | } | 
 |  | 
 | /* I2C */ | 
 | static int cxusb_i2c_xfer(struct i2c_adapter *adap,struct i2c_msg msg[],int num) | 
 | { | 
 | 	struct dvb_usb_device *d = i2c_get_adapdata(adap); | 
 | 	int i; | 
 |  | 
 | 	if (down_interruptible(&d->i2c_sem) < 0) | 
 | 		return -EAGAIN; | 
 |  | 
 | 	if (num > 2) | 
 | 		warn("more than 2 i2c messages at a time is not handled yet. TODO."); | 
 |  | 
 | 	for (i = 0; i < num; i++) { | 
 |  | 
 | 		switch (msg[i].addr) { | 
 | 			case 0x63: | 
 | 				cxusb_gpio_tuner(d,0); | 
 | 				break; | 
 | 			default: | 
 | 				cxusb_gpio_tuner(d,1); | 
 | 				break; | 
 | 		} | 
 |  | 
 | 		/* read request */ | 
 | 		if (i+1 < num && (msg[i+1].flags & I2C_M_RD)) { | 
 | 			u8 obuf[3+msg[i].len], ibuf[1+msg[i+1].len]; | 
 | 			obuf[0] = msg[i].len; | 
 | 			obuf[1] = msg[i+1].len; | 
 | 			obuf[2] = msg[i].addr; | 
 | 			memcpy(&obuf[3],msg[i].buf,msg[i].len); | 
 |  | 
 | 			if (cxusb_ctrl_msg(d, CMD_I2C_READ, | 
 | 						obuf, 3+msg[i].len, | 
 | 						ibuf, 1+msg[i+1].len) < 0) | 
 | 				break; | 
 |  | 
 | 			if (ibuf[0] != 0x08) | 
 | 				deb_info("i2c read could have been failed\n"); | 
 |  | 
 | 			memcpy(msg[i+1].buf,&ibuf[1],msg[i+1].len); | 
 |  | 
 | 			i++; | 
 | 		} else { /* write */ | 
 | 			u8 obuf[2+msg[i].len], ibuf; | 
 | 			obuf[0] = msg[i].addr; | 
 | 			obuf[1] = msg[i].len; | 
 | 			memcpy(&obuf[2],msg[i].buf,msg[i].len); | 
 |  | 
 | 			if (cxusb_ctrl_msg(d,CMD_I2C_WRITE, obuf, 2+msg[i].len, &ibuf,1) < 0) | 
 | 				break; | 
 | 			if (ibuf != 0x08) | 
 | 				deb_info("i2c write could have been failed\n"); | 
 | 		} | 
 | 	} | 
 |  | 
 | 	up(&d->i2c_sem); | 
 | 	return i; | 
 | } | 
 |  | 
 | static u32 cxusb_i2c_func(struct i2c_adapter *adapter) | 
 | { | 
 | 	return I2C_FUNC_I2C; | 
 | } | 
 |  | 
 | static struct i2c_algorithm cxusb_i2c_algo = { | 
 | 	.master_xfer   = cxusb_i2c_xfer, | 
 | 	.functionality = cxusb_i2c_func, | 
 | }; | 
 |  | 
 | static int cxusb_power_ctrl(struct dvb_usb_device *d, int onoff) | 
 | { | 
 | 	u8 b = 0; | 
 | 	if (onoff) | 
 | 		return cxusb_ctrl_msg(d, CMD_POWER_ON, &b, 1, NULL, 0); | 
 | 	else | 
 | 		return cxusb_ctrl_msg(d, CMD_POWER_OFF, &b, 1, NULL, 0); | 
 | } | 
 |  | 
 | static int cxusb_streaming_ctrl(struct dvb_usb_device *d, int onoff) | 
 | { | 
 | 	u8 buf[2] = { 0x03, 0x00 }; | 
 | 	if (onoff) | 
 | 		cxusb_ctrl_msg(d,CMD_STREAMING_ON, buf, 2, NULL, 0); | 
 | 	else | 
 | 		cxusb_ctrl_msg(d,CMD_STREAMING_OFF, NULL, 0, NULL, 0); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int cxusb_rc_query(struct dvb_usb_device *d, u32 *event, int *state) | 
 | { | 
 | 	struct dvb_usb_rc_key *keymap = d->props.rc_key_map; | 
 | 	u8 ircode[4]; | 
 | 	int i; | 
 |  | 
 | 	cxusb_ctrl_msg(d, CMD_GET_IR_CODE, NULL, 0, ircode, 4); | 
 |  | 
 | 	*event = 0; | 
 | 	*state = REMOTE_NO_KEY_PRESSED; | 
 |  | 
 | 	for (i = 0; i < d->props.rc_key_map_size; i++) { | 
 | 		if (keymap[i].custom == ircode[2] && | 
 | 		    keymap[i].data == ircode[3]) { | 
 | 			*event = keymap[i].event; | 
 | 			*state = REMOTE_KEY_PRESSED; | 
 |  | 
 | 			return 0; | 
 | 		} | 
 | 	} | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static struct dvb_usb_rc_key dvico_mce_rc_keys[] = { | 
 | 	{ 0xfe, 0x02, KEY_TV }, | 
 | 	{ 0xfe, 0x0e, KEY_MP3 }, | 
 | 	{ 0xfe, 0x1a, KEY_DVD }, | 
 | 	{ 0xfe, 0x1e, KEY_FAVORITES }, | 
 | 	{ 0xfe, 0x16, KEY_SETUP }, | 
 | 	{ 0xfe, 0x46, KEY_POWER2 }, | 
 | 	{ 0xfe, 0x0a, KEY_EPG }, | 
 | 	{ 0xfe, 0x49, KEY_BACK }, | 
 | 	{ 0xfe, 0x4d, KEY_MENU }, | 
 | 	{ 0xfe, 0x51, KEY_UP }, | 
 | 	{ 0xfe, 0x5b, KEY_LEFT }, | 
 | 	{ 0xfe, 0x5f, KEY_RIGHT }, | 
 | 	{ 0xfe, 0x53, KEY_DOWN }, | 
 | 	{ 0xfe, 0x5e, KEY_OK }, | 
 | 	{ 0xfe, 0x59, KEY_INFO }, | 
 | 	{ 0xfe, 0x55, KEY_TAB }, | 
 | 	{ 0xfe, 0x0f, KEY_PREVIOUSSONG },/* Replay */ | 
 | 	{ 0xfe, 0x12, KEY_NEXTSONG },	/* Skip */ | 
 | 	{ 0xfe, 0x42, KEY_ENTER	 },	/* Windows/Start */ | 
 | 	{ 0xfe, 0x15, KEY_VOLUMEUP }, | 
 | 	{ 0xfe, 0x05, KEY_VOLUMEDOWN }, | 
 | 	{ 0xfe, 0x11, KEY_CHANNELUP }, | 
 | 	{ 0xfe, 0x09, KEY_CHANNELDOWN }, | 
 | 	{ 0xfe, 0x52, KEY_CAMERA }, | 
 | 	{ 0xfe, 0x5a, KEY_TUNER },	/* Live */ | 
 | 	{ 0xfe, 0x19, KEY_OPEN }, | 
 | 	{ 0xfe, 0x0b, KEY_1 }, | 
 | 	{ 0xfe, 0x17, KEY_2 }, | 
 | 	{ 0xfe, 0x1b, KEY_3 }, | 
 | 	{ 0xfe, 0x07, KEY_4 }, | 
 | 	{ 0xfe, 0x50, KEY_5 }, | 
 | 	{ 0xfe, 0x54, KEY_6 }, | 
 | 	{ 0xfe, 0x48, KEY_7 }, | 
 | 	{ 0xfe, 0x4c, KEY_8 }, | 
 | 	{ 0xfe, 0x58, KEY_9 }, | 
 | 	{ 0xfe, 0x13, KEY_ANGLE },	/* Aspect */ | 
 | 	{ 0xfe, 0x03, KEY_0 }, | 
 | 	{ 0xfe, 0x1f, KEY_ZOOM }, | 
 | 	{ 0xfe, 0x43, KEY_REWIND }, | 
 | 	{ 0xfe, 0x47, KEY_PLAYPAUSE }, | 
 | 	{ 0xfe, 0x4f, KEY_FASTFORWARD }, | 
 | 	{ 0xfe, 0x57, KEY_MUTE }, | 
 | 	{ 0xfe, 0x0d, KEY_STOP }, | 
 | 	{ 0xfe, 0x01, KEY_RECORD }, | 
 | 	{ 0xfe, 0x4e, KEY_POWER }, | 
 | }; | 
 |  | 
 | static int cxusb_dee1601_demod_init(struct dvb_frontend* fe) | 
 | { | 
 | 	static u8 clock_config []  = { CLOCK_CTL,  0x38, 0x28 }; | 
 | 	static u8 reset []         = { RESET,      0x80 }; | 
 | 	static u8 adc_ctl_1_cfg [] = { ADC_CTL_1,  0x40 }; | 
 | 	static u8 agc_cfg []       = { AGC_TARGET, 0x28, 0x20 }; | 
 | 	static u8 gpp_ctl_cfg []   = { GPP_CTL,    0x33 }; | 
 | 	static u8 capt_range_cfg[] = { CAPT_RANGE, 0x32 }; | 
 |  | 
 | 	mt352_write(fe, clock_config,   sizeof(clock_config)); | 
 | 	udelay(200); | 
 | 	mt352_write(fe, reset,          sizeof(reset)); | 
 | 	mt352_write(fe, adc_ctl_1_cfg,  sizeof(adc_ctl_1_cfg)); | 
 |  | 
 | 	mt352_write(fe, agc_cfg,        sizeof(agc_cfg)); | 
 | 	mt352_write(fe, gpp_ctl_cfg,    sizeof(gpp_ctl_cfg)); | 
 | 	mt352_write(fe, capt_range_cfg, sizeof(capt_range_cfg)); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int cxusb_mt352_demod_init(struct dvb_frontend* fe) | 
 | {	/* used in both lgz201 and th7579 */ | 
 | 	static u8 clock_config []  = { CLOCK_CTL,  0x38, 0x29 }; | 
 | 	static u8 reset []         = { RESET,      0x80 }; | 
 | 	static u8 adc_ctl_1_cfg [] = { ADC_CTL_1,  0x40 }; | 
 | 	static u8 agc_cfg []       = { AGC_TARGET, 0x24, 0x20 }; | 
 | 	static u8 gpp_ctl_cfg []   = { GPP_CTL,    0x33 }; | 
 | 	static u8 capt_range_cfg[] = { CAPT_RANGE, 0x32 }; | 
 |  | 
 | 	mt352_write(fe, clock_config,   sizeof(clock_config)); | 
 | 	udelay(200); | 
 | 	mt352_write(fe, reset,          sizeof(reset)); | 
 | 	mt352_write(fe, adc_ctl_1_cfg,  sizeof(adc_ctl_1_cfg)); | 
 |  | 
 | 	mt352_write(fe, agc_cfg,        sizeof(agc_cfg)); | 
 | 	mt352_write(fe, gpp_ctl_cfg,    sizeof(gpp_ctl_cfg)); | 
 | 	mt352_write(fe, capt_range_cfg, sizeof(capt_range_cfg)); | 
 | 	return 0; | 
 | } | 
 |  | 
 | static struct cx22702_config cxusb_cx22702_config = { | 
 | 	.demod_address = 0x63, | 
 |  | 
 | 	.output_mode = CX22702_PARALLEL_OUTPUT, | 
 |  | 
 | 	.pll_init = dvb_usb_pll_init_i2c, | 
 | 	.pll_set  = dvb_usb_pll_set_i2c, | 
 | }; | 
 |  | 
 | static struct lgdt330x_config cxusb_lgdt330x_config = { | 
 | 	.demod_address = 0x0e, | 
 | 	.demod_chip    = LGDT3303, | 
 | 	.pll_set       = dvb_usb_pll_set_i2c, | 
 | }; | 
 |  | 
 | static struct mt352_config cxusb_dee1601_config = { | 
 | 	.demod_address = 0x0f, | 
 | 	.demod_init    = cxusb_dee1601_demod_init, | 
 | 	.pll_set       = dvb_usb_pll_set, | 
 | }; | 
 |  | 
 | struct mt352_config cxusb_mt352_config = { | 
 | 	/* used in both lgz201 and th7579 */ | 
 | 	.demod_address = 0x0f, | 
 | 	.demod_init    = cxusb_mt352_demod_init, | 
 | 	.pll_set       = dvb_usb_pll_set, | 
 | }; | 
 |  | 
 | /* Callbacks for DVB USB */ | 
 | static int cxusb_fmd1216me_tuner_attach(struct dvb_usb_device *d) | 
 | { | 
 | 	u8 bpll[4] = { 0x0b, 0xdc, 0x9c, 0xa0 }; | 
 | 	d->pll_addr = 0x61; | 
 | 	memcpy(d->pll_init, bpll, 4); | 
 | 	d->pll_desc = &dvb_pll_fmd1216me; | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int cxusb_lgh064f_tuner_attach(struct dvb_usb_device *d) | 
 | { | 
 | 	u8 bpll[4] = { 0x00, 0x00, 0x18, 0x50 }; | 
 | 	/* bpll[2] : unset bit 3, set bits 4&5 | 
 | 	   bpll[3] : 0x50 - digital, 0x20 - analog */ | 
 | 	d->pll_addr = 0x61; | 
 | 	memcpy(d->pll_init, bpll, 4); | 
 | 	d->pll_desc = &dvb_pll_tdvs_tua6034; | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int cxusb_dee1601_tuner_attach(struct dvb_usb_device *d) | 
 | { | 
 | 	d->pll_addr = 0x61; | 
 | 	d->pll_desc = &dvb_pll_thomson_dtt7579; | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int cxusb_lgz201_tuner_attach(struct dvb_usb_device *d) | 
 | { | 
 | 	d->pll_addr = 0x61; | 
 | 	d->pll_desc = &dvb_pll_lg_z201; | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int cxusb_dtt7579_tuner_attach(struct dvb_usb_device *d) | 
 | { | 
 | 	d->pll_addr = 0x60; | 
 | 	d->pll_desc = &dvb_pll_thomson_dtt7579; | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int cxusb_cx22702_frontend_attach(struct dvb_usb_device *d) | 
 | { | 
 | 	u8 b; | 
 | 	if (usb_set_interface(d->udev,0,6) < 0) | 
 | 		err("set interface failed"); | 
 |  | 
 | 	cxusb_ctrl_msg(d,CMD_DIGITAL, NULL, 0, &b, 1); | 
 |  | 
 | 	if ((d->fe = cx22702_attach(&cxusb_cx22702_config, &d->i2c_adap)) != NULL) | 
 | 		return 0; | 
 |  | 
 | 	return -EIO; | 
 | } | 
 |  | 
 | static int cxusb_lgdt330x_frontend_attach(struct dvb_usb_device *d) | 
 | { | 
 | 	if (usb_set_interface(d->udev,0,7) < 0) | 
 | 		err("set interface failed"); | 
 |  | 
 | 	cxusb_ctrl_msg(d,CMD_DIGITAL, NULL, 0, NULL, 0); | 
 |  | 
 | 	if ((d->fe = lgdt330x_attach(&cxusb_lgdt330x_config, &d->i2c_adap)) != NULL) | 
 | 		return 0; | 
 |  | 
 | 	return -EIO; | 
 | } | 
 |  | 
 | static int cxusb_mt352_frontend_attach(struct dvb_usb_device *d) | 
 | {	/* used in both lgz201 and th7579 */ | 
 | 	if (usb_set_interface(d->udev,0,0) < 0) | 
 | 		err("set interface failed"); | 
 |  | 
 | 	cxusb_ctrl_msg(d,CMD_DIGITAL, NULL, 0, NULL, 0); | 
 |  | 
 | 	if ((d->fe = mt352_attach(&cxusb_mt352_config, &d->i2c_adap)) != NULL) | 
 | 		return 0; | 
 |  | 
 | 	return -EIO; | 
 | } | 
 |  | 
 | static int cxusb_dee1601_frontend_attach(struct dvb_usb_device *d) | 
 | { | 
 | 	if (usb_set_interface(d->udev,0,0) < 0) | 
 | 		err("set interface failed"); | 
 |  | 
 | 	cxusb_ctrl_msg(d,CMD_DIGITAL, NULL, 0, NULL, 0); | 
 |  | 
 | 	if ((d->fe = mt352_attach(&cxusb_dee1601_config, &d->i2c_adap)) != NULL) | 
 | 		return 0; | 
 |  | 
 | 	return -EIO; | 
 | } | 
 |  | 
 | /* | 
 |  * DViCO bluebird firmware needs the "warm" product ID to be patched into the | 
 |  * firmware file before download. | 
 |  */ | 
 |  | 
 | #define BLUEBIRD_01_ID_OFFSET 6638 | 
 | static int bluebird_patch_dvico_firmware_download(struct usb_device *udev, const struct firmware *fw) | 
 | { | 
 | 	if (fw->size < BLUEBIRD_01_ID_OFFSET + 4) | 
 | 		return -EINVAL; | 
 |  | 
 | 	if (fw->data[BLUEBIRD_01_ID_OFFSET] == (USB_VID_DVICO & 0xff) && | 
 | 	    fw->data[BLUEBIRD_01_ID_OFFSET + 1] == USB_VID_DVICO >> 8) { | 
 |  | 
 | 		/* FIXME: are we allowed to change the fw-data ? */ | 
 | 		fw->data[BLUEBIRD_01_ID_OFFSET + 2] = udev->descriptor.idProduct + 1; | 
 | 		fw->data[BLUEBIRD_01_ID_OFFSET + 3] = udev->descriptor.idProduct >> 8; | 
 |  | 
 | 		return usb_cypress_load_firmware(udev,fw,CYPRESS_FX2); | 
 | 	} | 
 |  | 
 | 	return -EINVAL; | 
 | } | 
 |  | 
 | /* DVB USB Driver stuff */ | 
 | static struct dvb_usb_properties cxusb_medion_properties; | 
 | static struct dvb_usb_properties cxusb_bluebird_lgh064f_properties; | 
 | static struct dvb_usb_properties cxusb_bluebird_dee1601_properties; | 
 | static struct dvb_usb_properties cxusb_bluebird_lgz201_properties; | 
 | static struct dvb_usb_properties cxusb_bluebird_dtt7579_properties; | 
 |  | 
 | static int cxusb_probe(struct usb_interface *intf, | 
 | 		const struct usb_device_id *id) | 
 | { | 
 | 	if (dvb_usb_device_init(intf,&cxusb_medion_properties,THIS_MODULE,NULL) == 0 || | 
 | 		dvb_usb_device_init(intf,&cxusb_bluebird_lgh064f_properties,THIS_MODULE,NULL) == 0 || | 
 | 		dvb_usb_device_init(intf,&cxusb_bluebird_dee1601_properties,THIS_MODULE,NULL) == 0 || | 
 | 		dvb_usb_device_init(intf,&cxusb_bluebird_lgz201_properties,THIS_MODULE,NULL) == 0 || | 
 | 		dvb_usb_device_init(intf,&cxusb_bluebird_dtt7579_properties,THIS_MODULE,NULL) == 0) { | 
 | 		return 0; | 
 | 	} | 
 |  | 
 | 	return -EINVAL; | 
 | } | 
 |  | 
 | static struct usb_device_id cxusb_table [] = { | 
 | 		{ USB_DEVICE(USB_VID_MEDION, USB_PID_MEDION_MD95700) }, | 
 | 		{ USB_DEVICE(USB_VID_DVICO, USB_PID_DVICO_BLUEBIRD_LG064F_COLD) }, | 
 | 		{ USB_DEVICE(USB_VID_DVICO, USB_PID_DVICO_BLUEBIRD_LG064F_WARM) }, | 
 | 		{ USB_DEVICE(USB_VID_DVICO, USB_PID_DVICO_BLUEBIRD_DEE1601_COLD) }, | 
 | 		{ USB_DEVICE(USB_VID_DVICO, USB_PID_DVICO_BLUEBIRD_DEE1601_WARM) }, | 
 | 		{ USB_DEVICE(USB_VID_DVICO, USB_PID_DVICO_BLUEBIRD_LGZ201_COLD) }, | 
 | 		{ USB_DEVICE(USB_VID_DVICO, USB_PID_DVICO_BLUEBIRD_LGZ201_WARM) }, | 
 | 		{ USB_DEVICE(USB_VID_DVICO, USB_PID_DVICO_BLUEBIRD_TH7579_COLD) }, | 
 | 		{ USB_DEVICE(USB_VID_DVICO, USB_PID_DVICO_BLUEBIRD_TH7579_WARM) }, | 
 | 		{ USB_DEVICE(USB_VID_DVICO, USB_PID_DIGITALNOW_BLUEBIRD_DEE1601_COLD) }, | 
 | 		{ USB_DEVICE(USB_VID_DVICO, USB_PID_DIGITALNOW_BLUEBIRD_DEE1601_WARM) }, | 
 | 		{}		/* Terminating entry */ | 
 | }; | 
 | MODULE_DEVICE_TABLE (usb, cxusb_table); | 
 |  | 
 | static struct dvb_usb_properties cxusb_medion_properties = { | 
 | 	.caps = DVB_USB_IS_AN_I2C_ADAPTER, | 
 |  | 
 | 	.usb_ctrl = CYPRESS_FX2, | 
 |  | 
 | 	.size_of_priv     = sizeof(struct cxusb_state), | 
 |  | 
 | 	.streaming_ctrl   = cxusb_streaming_ctrl, | 
 | 	.power_ctrl       = cxusb_power_ctrl, | 
 | 	.frontend_attach  = cxusb_cx22702_frontend_attach, | 
 | 	.tuner_attach     = cxusb_fmd1216me_tuner_attach, | 
 |  | 
 | 	.i2c_algo         = &cxusb_i2c_algo, | 
 |  | 
 | 	.generic_bulk_ctrl_endpoint = 0x01, | 
 | 	/* parameter for the MPEG2-data transfer */ | 
 | 	.urb = { | 
 | 		.type = DVB_USB_BULK, | 
 | 		.count = 5, | 
 | 		.endpoint = 0x02, | 
 | 		.u = { | 
 | 			.bulk = { | 
 | 				.buffersize = 8192, | 
 | 			} | 
 | 		} | 
 | 	}, | 
 |  | 
 | 	.num_device_descs = 1, | 
 | 	.devices = { | 
 | 		{   "Medion MD95700 (MDUSBTV-HYBRID)", | 
 | 			{ NULL }, | 
 | 			{ &cxusb_table[0], NULL }, | 
 | 		}, | 
 | 	} | 
 | }; | 
 |  | 
 | static struct dvb_usb_properties cxusb_bluebird_lgh064f_properties = { | 
 | 	.caps = DVB_USB_IS_AN_I2C_ADAPTER, | 
 |  | 
 | 	.usb_ctrl          = DEVICE_SPECIFIC, | 
 | 	.firmware          = "dvb-usb-bluebird-01.fw", | 
 | 	.download_firmware = bluebird_patch_dvico_firmware_download, | 
 | 	/* use usb alt setting 0 for EP4 transfer (dvb-t), | 
 | 	   use usb alt setting 7 for EP2 transfer (atsc) */ | 
 |  | 
 | 	.size_of_priv     = sizeof(struct cxusb_state), | 
 |  | 
 | 	.streaming_ctrl   = cxusb_streaming_ctrl, | 
 | 	.power_ctrl       = cxusb_power_ctrl, | 
 | 	.frontend_attach  = cxusb_lgdt330x_frontend_attach, | 
 | 	.tuner_attach     = cxusb_lgh064f_tuner_attach, | 
 |  | 
 | 	.i2c_algo         = &cxusb_i2c_algo, | 
 |  | 
 | 	.generic_bulk_ctrl_endpoint = 0x01, | 
 | 	/* parameter for the MPEG2-data transfer */ | 
 | 	.urb = { | 
 | 		.type = DVB_USB_BULK, | 
 | 		.count = 5, | 
 | 		.endpoint = 0x02, | 
 | 		.u = { | 
 | 			.bulk = { | 
 | 				.buffersize = 8192, | 
 | 			} | 
 | 		} | 
 | 	}, | 
 |  | 
 | 	.num_device_descs = 1, | 
 | 	.devices = { | 
 | 		{   "DViCO FusionHDTV5 USB Gold", | 
 | 			{ &cxusb_table[1], NULL }, | 
 | 			{ &cxusb_table[2], NULL }, | 
 | 		}, | 
 | 	} | 
 | }; | 
 |  | 
 | static struct dvb_usb_properties cxusb_bluebird_dee1601_properties = { | 
 | 	.caps = DVB_USB_IS_AN_I2C_ADAPTER, | 
 |  | 
 | 	.usb_ctrl          = DEVICE_SPECIFIC, | 
 | 	.firmware          = "dvb-usb-bluebird-01.fw", | 
 | 	.download_firmware = bluebird_patch_dvico_firmware_download, | 
 | 	/* use usb alt setting 0 for EP4 transfer (dvb-t), | 
 | 	   use usb alt setting 7 for EP2 transfer (atsc) */ | 
 |  | 
 | 	.size_of_priv     = sizeof(struct cxusb_state), | 
 |  | 
 | 	.streaming_ctrl   = cxusb_streaming_ctrl, | 
 | 	.power_ctrl       = cxusb_power_ctrl, | 
 | 	.frontend_attach  = cxusb_dee1601_frontend_attach, | 
 | 	.tuner_attach     = cxusb_dee1601_tuner_attach, | 
 |  | 
 | 	.i2c_algo         = &cxusb_i2c_algo, | 
 |  | 
 | 	.rc_interval      = 150, | 
 | 	.rc_key_map       = dvico_mce_rc_keys, | 
 | 	.rc_key_map_size  = ARRAY_SIZE(dvico_mce_rc_keys), | 
 | 	.rc_query         = cxusb_rc_query, | 
 |  | 
 | 	.generic_bulk_ctrl_endpoint = 0x01, | 
 | 	/* parameter for the MPEG2-data transfer */ | 
 | 	.urb = { | 
 | 		.type = DVB_USB_BULK, | 
 | 		.count = 5, | 
 | 		.endpoint = 0x04, | 
 | 		.u = { | 
 | 			.bulk = { | 
 | 				.buffersize = 8192, | 
 | 			} | 
 | 		} | 
 | 	}, | 
 |  | 
 | 	.num_device_descs = 2, | 
 | 	.devices = { | 
 | 		{   "DViCO FusionHDTV DVB-T Dual USB", | 
 | 			{ &cxusb_table[3], NULL }, | 
 | 			{ &cxusb_table[4], NULL }, | 
 | 		}, | 
 | 		{   "DigitalNow DVB-T Dual USB", | 
 | 			{ &cxusb_table[9],  NULL }, | 
 | 			{ &cxusb_table[10], NULL }, | 
 | 		}, | 
 | 	} | 
 | }; | 
 |  | 
 | static struct dvb_usb_properties cxusb_bluebird_lgz201_properties = { | 
 | 	.caps = DVB_USB_IS_AN_I2C_ADAPTER, | 
 |  | 
 | 	.usb_ctrl          = DEVICE_SPECIFIC, | 
 | 	.firmware          = "dvb-usb-bluebird-01.fw", | 
 | 	.download_firmware = bluebird_patch_dvico_firmware_download, | 
 | 	/* use usb alt setting 0 for EP4 transfer (dvb-t), | 
 | 	   use usb alt setting 7 for EP2 transfer (atsc) */ | 
 |  | 
 | 	.size_of_priv     = sizeof(struct cxusb_state), | 
 |  | 
 | 	.streaming_ctrl   = cxusb_streaming_ctrl, | 
 | 	.power_ctrl       = cxusb_power_ctrl, | 
 | 	.frontend_attach  = cxusb_mt352_frontend_attach, | 
 | 	.tuner_attach     = cxusb_lgz201_tuner_attach, | 
 |  | 
 | 	.i2c_algo         = &cxusb_i2c_algo, | 
 |  | 
 | 	.generic_bulk_ctrl_endpoint = 0x01, | 
 | 	/* parameter for the MPEG2-data transfer */ | 
 | 	.urb = { | 
 | 		.type = DVB_USB_BULK, | 
 | 		.count = 5, | 
 | 		.endpoint = 0x04, | 
 | 		.u = { | 
 | 			.bulk = { | 
 | 				.buffersize = 8192, | 
 | 			} | 
 | 		} | 
 | 	}, | 
 |  | 
 | 	.num_device_descs = 1, | 
 | 	.devices = { | 
 | 		{   "DViCO FusionHDTV DVB-T USB (LGZ201)", | 
 | 			{ &cxusb_table[5], NULL }, | 
 | 			{ &cxusb_table[6], NULL }, | 
 | 		}, | 
 | 	} | 
 | }; | 
 |  | 
 | static struct dvb_usb_properties cxusb_bluebird_dtt7579_properties = { | 
 | 	.caps = DVB_USB_IS_AN_I2C_ADAPTER, | 
 |  | 
 | 	.usb_ctrl          = DEVICE_SPECIFIC, | 
 | 	.firmware          = "dvb-usb-bluebird-01.fw", | 
 | 	.download_firmware = bluebird_patch_dvico_firmware_download, | 
 | 	/* use usb alt setting 0 for EP4 transfer (dvb-t), | 
 | 	   use usb alt setting 7 for EP2 transfer (atsc) */ | 
 |  | 
 | 	.size_of_priv     = sizeof(struct cxusb_state), | 
 |  | 
 | 	.streaming_ctrl   = cxusb_streaming_ctrl, | 
 | 	.power_ctrl       = cxusb_power_ctrl, | 
 | 	.frontend_attach  = cxusb_mt352_frontend_attach, | 
 | 	.tuner_attach     = cxusb_dtt7579_tuner_attach, | 
 |  | 
 | 	.i2c_algo         = &cxusb_i2c_algo, | 
 |  | 
 | 	.generic_bulk_ctrl_endpoint = 0x01, | 
 | 	/* parameter for the MPEG2-data transfer */ | 
 | 	.urb = { | 
 | 		.type = DVB_USB_BULK, | 
 | 		.count = 5, | 
 | 		.endpoint = 0x04, | 
 | 		.u = { | 
 | 			.bulk = { | 
 | 				.buffersize = 8192, | 
 | 			} | 
 | 		} | 
 | 	}, | 
 |  | 
 | 	.num_device_descs = 1, | 
 | 	.devices = { | 
 | 		{   "DViCO FusionHDTV DVB-T USB (TH7579)", | 
 | 			{ &cxusb_table[7], NULL }, | 
 | 			{ &cxusb_table[8], NULL }, | 
 | 		}, | 
 | 	} | 
 | }; | 
 |  | 
 | static struct usb_driver cxusb_driver = { | 
 | 	.name		= "dvb_usb_cxusb", | 
 | 	.probe		= cxusb_probe, | 
 | 	.disconnect = dvb_usb_device_exit, | 
 | 	.id_table	= cxusb_table, | 
 | }; | 
 |  | 
 | /* module stuff */ | 
 | static int __init cxusb_module_init(void) | 
 | { | 
 | 	int result; | 
 | 	if ((result = usb_register(&cxusb_driver))) { | 
 | 		err("usb_register failed. Error number %d",result); | 
 | 		return result; | 
 | 	} | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static void __exit cxusb_module_exit(void) | 
 | { | 
 | 	/* deregister this driver from the USB subsystem */ | 
 | 	usb_deregister(&cxusb_driver); | 
 | } | 
 |  | 
 | module_init (cxusb_module_init); | 
 | module_exit (cxusb_module_exit); | 
 |  | 
 | MODULE_AUTHOR("Patrick Boettcher <patrick.boettcher@desy.de>"); | 
 | MODULE_AUTHOR("Michael Krufky <mkrufky@m1k.net>"); | 
 | MODULE_AUTHOR("Chris Pascoe <c.pascoe@itee.uq.edu.au>"); | 
 | MODULE_DESCRIPTION("Driver for Conexant USB2.0 hybrid reference design"); | 
 | MODULE_VERSION("1.0-alpha"); | 
 | MODULE_LICENSE("GPL"); |