| menuconfig CAN_SJA1000 |
| tristate "Philips/NXP SJA1000 devices" |
| depends on HAS_IOMEM |
| |
| if CAN_SJA1000 |
| |
| config CAN_SJA1000_ISA |
| tristate "ISA Bus based legacy SJA1000 driver" |
| ---help--- |
| This driver adds legacy support for SJA1000 chips connected to |
| the ISA bus using I/O port, memory mapped or indirect access. |
| |
| config CAN_SJA1000_PLATFORM |
| tristate "Generic Platform Bus based SJA1000 driver" |
| ---help--- |
| This driver adds support for the SJA1000 chips connected to |
| the "platform bus" (Linux abstraction for directly to the |
| processor attached devices). Which can be found on various |
| boards from Phytec (http://www.phytec.de) like the PCM027, |
| PCM038. It also provides the OpenFirmware "platform bus" found |
| on embedded systems with OpenFirmware bindings, e.g. if you |
| have a PowerPC based system you may want to enable this option. |
| |
| config CAN_EMS_PCMCIA |
| tristate "EMS CPC-CARD Card" |
| depends on PCMCIA |
| ---help--- |
| This driver is for the one or two channel CPC-CARD cards from |
| EMS Dr. Thomas Wuensche (http://www.ems-wuensche.de). |
| |
| config CAN_EMS_PCI |
| tristate "EMS CPC-PCI, CPC-PCIe and CPC-104P Card" |
| depends on PCI |
| ---help--- |
| This driver is for the one, two or four channel CPC-PCI, |
| CPC-PCIe and CPC-104P cards from EMS Dr. Thomas Wuensche |
| (http://www.ems-wuensche.de). |
| |
| config CAN_PEAK_PCMCIA |
| tristate "PEAK PCAN-PC Card" |
| depends on PCMCIA |
| depends on HAS_IOPORT_MAP |
| ---help--- |
| This driver is for the PCAN-PC Card PCMCIA adapter (1 or 2 channels) |
| from PEAK-System (http://www.peak-system.com). To compile this |
| driver as a module, choose M here: the module will be called |
| peak_pcmcia. |
| |
| config CAN_PEAK_PCI |
| tristate "PEAK PCAN-PCI/PCIe/miniPCI Cards" |
| depends on PCI |
| ---help--- |
| This driver is for the PCAN-PCI/PCIe/miniPCI cards |
| (1, 2, 3 or 4 channels) from PEAK-System Technik |
| (http://www.peak-system.com). |
| |
| config CAN_PEAK_PCIEC |
| bool "PEAK PCAN-ExpressCard Cards" |
| depends on CAN_PEAK_PCI |
| select I2C |
| select I2C_ALGOBIT |
| default y |
| ---help--- |
| Say Y here if you want to use a PCAN-ExpressCard from PEAK-System |
| Technik. This will also automatically select I2C and I2C_ALGO |
| configuration options. |
| |
| config CAN_KVASER_PCI |
| tristate "Kvaser PCIcanx and Kvaser PCIcan PCI Cards" |
| depends on PCI |
| ---help--- |
| This driver is for the PCIcanx and PCIcan cards (1, 2 or |
| 4 channel) from Kvaser (http://www.kvaser.com). |
| |
| config CAN_PLX_PCI |
| tristate "PLX90xx PCI-bridge based Cards" |
| depends on PCI |
| ---help--- |
| This driver is for CAN interface cards based on |
| the PLX90xx PCI bridge. |
| Driver supports now: |
| - Adlink PCI-7841/cPCI-7841 card (http://www.adlinktech.com/) |
| - Adlink PCI-7841/cPCI-7841 SE card |
| - esd CAN-PCI/CPCI/PCI104/200 (http://www.esd.eu/) |
| - esd CAN-PCI/PMC/266 |
| - esd CAN-PCIe/2000 |
| - Marathon CAN-bus-PCI card (http://www.marathon.ru/) |
| - TEWS TECHNOLOGIES TPMC810 card (http://www.tews.com/) |
| - IXXAT Automation PC-I 04/PCI card (http://www.ixxat.com/) |
| - Connect Tech Inc. CANpro/104-Plus Opto (CRG001) card (http://www.connecttech.com) |
| |
| config CAN_TSCAN1 |
| tristate "TS-CAN1 PC104 boards" |
| depends on ISA |
| help |
| This driver is for Technologic Systems' TSCAN-1 PC104 boards. |
| http://www.embeddedarm.com/products/board-detail.php?product=TS-CAN1 |
| The driver supports multiple boards and automatically configures them: |
| PLD IO base addresses are read from jumpers JP1 and JP2, |
| IRQ numbers are read from jumpers JP4 and JP5, |
| SJA1000 IO base addresses are chosen heuristically (first that works). |
| |
| endif |
